Search Results

Search found 24609 results on 985 pages for 'private ip'.

Page 48/985 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • ip route add HOMEIP via SERVERIP disconnects me from ssh

    - by Arya
    I want to use a vpn connection on my Debian server but I get disconnected from ssh if I connect to the vpn. I thought by using the "ip route add" I can prevent getting disconnected from my server and it will continue to use the main connection for communication between my computer and the server, and the vpn for communication with other ips. This is the command I use ip route add PUBLICHOMEIP via PUBLICSERVERIP But I get disconnected after the "ip route add" command too. Am I making a mistake anywhere?

    Read the article

  • How to configure three IP address into single server

    - by user1363308
    I have Cisco device for call forwarding and three different system,I want to configure 15 and 16 server IP into 192.168.53.197 means eth0 --> 192.168.53.197 eth1 --> 192.168.16.15 eth2 --> 192.168.16.16 which work i have done with 15 and 16 individual , I will do some work on 197 after configuration eth1 and eth2. Means one system have three IP address but base IP address is 192.168.53.197

    Read the article

  • Set up Ubuntu in Virtualbox to have static ip

    - by Don H
    I frequently work in different locations, and need to have a virtualbox version of Ubuntu server running locally. While I was at home getting it set up, I was able to ssh into the server using the locally allocated IP address. However, now that I'm elsewhere, ifconfig is still showing the old 10.0.x.x ip address, but instead of being in the 10.0.x.x space, my laptop's ip starts with 192.168.x.x With that in mind, if there a straightforward way to set up the virtual box Ubuntu server in such a way that I can just connect using "ssh servername" regardless of it's ip address?

    Read the article

  • Static IP addressing issue in Ubuntu on BeagleBoneBlack Rev C

    - by Stringfellow
    I have my BBB configured to use a static IP address using the following in the file /etc/network/interfaces: allow-hotplug eth0 iface eth0 inet static address 192.168.0.1 netmask 255.255.255.0 network 192.168.0.0 This seems to work ok on boot, but when the ethernet cable is unplugged and then plugged back in, I lose the IP address. Any ideas what's going on here? Another weird symptom: If I boot the BBB with the network cable unplugged, but the switch it's plugged into off, I'll get my static IP. But, when I turn the switch on, I'll get a DHCP-assigned address. This is even though I have it configured with a static IP address. One last thing. If I ifdown etho, the interface will be gone when I do an ifconfig. If I wait a few seconds, though, and then re-run ifconfig, it will reappear, without an IP address. (Before I disabled IPv6, I used to get a IPv4 DHCP address in this case... weird). When that happens, I get a message like this in /var/log/messages: Apr 23 20:32:06 beaglebone kernel: [ 737.170172] libphy: 4a101000.mdio:00 - Link is Up - 100/Full Apr 23 20:32:06 beaglebone kernel: [ 737.170304] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Here's my uname -a: root@beaglebone:/etc# uname -a Linux beaglebone 3.8.13-bone47 #1 SMP Fri Apr 11 01:36:09 UTC 2014 armv7l GNU/Linux Any ideas what's going on here?

    Read the article

  • Send email from different domains to different external IP's on a single server

    - by user140429
    I have set up a windows 2008 R2 server to route email from Exchange 2010 using SMTP Server in IIS. I have 3 seperate domains and would like to route each one through a different internal and external IP for (IP Reputation etc), at the minute it is only using the primary IP on the server to route email externally. Is this at all possible using SMTP Server in IIS, or is there any other software available to do this?

    Read the article

  • debian lenny : problem modifying static ip

    - by supertiti
    hello all, i'm trying to change a static ip assigned to a debian VM. I modified the /etc/network/interfaces file but my debian doesn't seem to like the new settings currently the machine's ip is set to 192.168.1.136 and i want the machine's ip to be set to 192.168.1.8 here's my modified /etc/network/interfaces : auto lo iface lo inet loopback allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.1.8 gateway 192.168.1.1 netmask 255.255.255.0

    Read the article

  • Mac | Router not assigning the IP address.

    - by Vaibhav Bajpai
    I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

    Read the article

  • Creating a private wiki

    - by Hand-E-Food
    I want to create a simple, private wiki, but am really struggling to find what I need. I require the following features: Private wiki. Only I will read or write it. Some formatting capability: headings, bold, italic, bullets, block quotes Wiki Viewer for Windows 7. If it comes with an editor, I need to be able to hide it. Page Editor for Windows 7. Page Editor for iPhone. Synchronize by cloud but available offline in Windows. So far, my research has led me to Markdown language. I can easily edit this as plain text using Notepad++ for Windows and Elements for iPhone. I can sync these files through Dropbox and have them available offline. What I can't find is a suitable viewer for Windows. I'd prefer to steer away from using HTML due to its verbose formatting codes. Can anyone recommend a solution for me? If need be, I'll happy to make a small one-off payment for software.

    Read the article

  • Have some questions about setting up a VPN to my private cloud servers

    - by Pure.Krome
    I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

    Read the article

  • Configure Virtualbox guest with static IP, SSH and internet access from host

    - by koskoz
    I have an Ubuntu Server 12 virtualbox guest running on a Windows 7 host which has a dynamic IP (and I don't wanna change this considering it's a laptop and I'm changing network frenquently). I want to have a static IP for my VM and a SSH access from my host but I still want to have the internet access on my VM. I tried added a second host only adapter and configured /etc/network/interface to set eth1 to a static ip, but I can't connect via SSH to it. Setting only adapter1 to host only works for SSH and static IP but I lose the internet access.

    Read the article

  • Why is Linux choosing the wrong source ip address

    - by Scheintod
    and what to do to let it choose the right one? This all happens inside an OpenVZ container: The Host is Debian/Wheezy with Redhat/OpenVZ Kernel: root@mycl2:~# uname -a Linux mycl2 2.6.32-openvz-042stab081.5-amd64 #1 SMP Mon Sep 30 16:40:27 MSK 2013 x86_64 GNU/Linux The container has two (virtual) network interfaces. One in public and one in private address-space: root@mycl2:~# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:775 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:32059 (31.3 KiB) TX bytes:56309 (54.9 KiB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:80.123.123.29 P-t-P:80.123.123.29 Bcast:80.123.123.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.0.1.29 P-t-P:10.0.1.29 Bcast:10.0.1.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 The route to the private network is set manually: root@mycl2:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 venet0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 venet0 Tring to ping others on the private network leads to the wrong source address been choosen: root@mycl2:~# ip route get 10.0.1.26 10.0.1.26 dev venet0 src 80.123.123.29 cache mtu 1500 advmss 1460 hoplimit 64 Why is this and what can I do about it? EDIT: If I create the route with (thanks to Joshua) ip route add 10.0.0.0/8 dev venet0 src 10.0.1.29 it is working. But according to man ip-route the src parameter should only set the source-ip if this route is chosen. But if this route is chosen then the source-ip would be that anyway.

    Read the article

  • TCP Sessions and IP Changes

    - by Kyle Brandt
    What happens to a TCP session when the IP of a client changes? I did a simple test of having netcat listen on a port, and connecting to that port from a client machine. I then changed the IP of the client while that nc session was open and sent some data, no data was received by server after changing the IP. I know they are different layers, but does TCP use IPs for part of how it distinguishes sessions? Does my example not work because of how the application handles it, or is this not working because of something happening at TCP/IP/Ethernet layers? Does this depend on the OS implementation? ( I am most interested in Linux at the moment)

    Read the article

  • How can I install a scanner by IP?

    - by user54266
    I'm trying to install a scanner by IP the same way you would install a printer by IP. I don't want to install the horrible HP Solution Center software but I don't know how to install a network scanner without the software. I'm having a hard time googling this because when I search for things like "install network scanner" or "install scanner by IP" all the results are for things like Angry IP Scanner which is clearly different than what I'm trying to get. Thanks in advance. This is for Windows Vista, but Windows 7 instructions will do.

    Read the article

  • Cisco ASA Multiple Public IP

    - by KGDI
    I have a Cisco ASA5510 and articles related to ASA and mulitple Public IP says this cant be done. My question is how to best solve a scenario like this: I have 3 zones, Outside, Inside and DMZ Outside is Internet Inside is Client machines DMZ is a zone for servers related to external and internal services. My scenario is a bit more complex, but to keep things simple this will do: I want to place an Exchange server and a web server (externally reachable in the DMZ zone) The webserver uses both TCP80/443, the Exchange server uses 443 So to the problem: With the ASA only having one public IP, how would you make a DNAT to port 443 on both the internal hosts behind 1 Public IP? Usually, when i do this kind of scenario With Linux boxes i use alias Interfaces like eth0:0, eth0:1 and set 1 Public IP on each. To me this must be a pretty common scenario, any ideas on how to solve it With ASA? /KGDI

    Read the article

  • Static IP question

    - by blade
    If I want to set a static IP for my AD DS, do I need an ISP which provides this facility? Also, if my VMS also need a static IP, would this have to be another IP or can it be the same? (I know this sounds a bit noobish). Thanks

    Read the article

  • Server IP must be a LAN IP (Port Forwarding Netgear Router)? [closed]

    - by rphello101
    I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do? I'm using Windows 7 in case it matters.

    Read the article

  • VPN instead of KVM over IP? [on hold]

    - by Blazer
    I have a server colocated on datacenter.CentOS operating system. They use KVM-ip when I need remote hands. Somoene told me that login using that will allow administrators (if they want) to get disk encryption password or ssh root pass via KVM-ip(is that true ?). Someone told me I can use VPN to login to my server instead of kvm over ip. Anyone have experience with that ? Is that option valid ? Thank you

    Read the article

  • Why Wouldn't Root Be Able to Change a Zone's IP Address in Oracle Solaris 11?

    - by rickramsey
    You might assume that if you have root access to an Oracle Solaris zone, you'd be able to change the root's IP address. If so, you'd proceed along these lines ... First, you'd log in: root@global_zone:~# zlogin user-zone Then you'd remove the IP interface: root@user-zone:~# ipadm delete-ip vnic0 Next, you'd create a new IP interface: root@user-zone:~# ipadm create-ip vnic0 Then you'd assign the IP interface a new IP address (10.0.0.10): root@user-zone:~# ipadm create-addr -a local=10.0.0.10/24 vnic0/v4 ipadm: cannot create address: Permission denied Why would that happen? Here are some potential reasons: You're in the wrong zone Nobody bothered to tell you that you were fired last week. The sysadmin for the global zone (probably your ex-girlfriend) enabled link protection mode on the zone with this sweet little command: root@global_zone:~# dladm set-linkprop -p \ protection=mac-nospoof,restricted,ip-nospoof vnic0 How'd your ex-girlfriend learn to do that? By reading this article: Securing a Cloud-Based Data Center with Oracle Solaris 11 by Orgad Kimchi, Ron Larson, and Richard Friedman When you build a private cloud, you need to protect sensitive data not only while it's in storage, but also during transmission between servers and clients, and when it's being used by an application. When a project is completed, the cloud must securely delete sensitive data and make sure the original data is kept secure. These are just some of the many security precautions a sysadmin needs to take to secure data in a cloud infrastructure. Orgad, Ron, and Richard and explain the rest and show you how to employ the security features in Oracle Solaris 11 to protect your cloud infrastructure. Part 2 of a three-part article on cloud deployments that use the Oracle Solaris Remote Lab as a case study. About the Photograph That's the fence separating a small group of tourist cabins from a pasture in the small town of Tropic, Utah. Follow Rick on: Personal Blog | Personal Twitter | Oracle Forums   Follow OTN Garage on: Web | Facebook | Twitter | YouTube

    Read the article

  • IIS7.5 + Wordpress + Restrict Access to wp-login.php by client IP address

    - by JuanValdez
    I am moving from an Apache host to IIS. One of my sites in Wordpress (running Multi-site) which give me multiple blogs. I have moved all my rules from my .htaccess to the Microsoft URL ReWrite module. I have one section left that will not import. I want to restrict access to all instances of the file wp-login.php by Client IP address. In my .htaccess file I did the following: <Files wp-login.php> Order Deny,Allow Deny from all Allow from 192.168 </Files> Any smart ideas on how to accompish this in IIS7.5?

    Read the article

  • Private constructor and public parameter constructor -C#

    - by Amutha
    I heard that private constructor prevent object creation from outside world. When i have a code public class Product { public string Name { get;set;} public double Price {get;set;} Product() { } public Product(string _name,double _price) { } } here still i can declare public constructor(parameter),won't it spoil the purpose of private constructor? When do we need both private and public constructor(parameter) in code? I need detailed explanation please.

    Read the article

  • Cannot ping static ip on eth1

    - by Calvin Froedge
    I am trying to ping the network interface I have set up for eth1. This is my config: auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1 broadcast 192.168.1.255 If I ping 192.168.1.2, I get: Ping 192.168.1.2 (192.168.1.2) 56(84) bytes of data. From 192.168.1.3 icmp_seq=3 Destination Host Unreachable Results of ifconfig tell me that the IPv4 address is 192.168.1.3. I can ping this ip. Bcast and Mask are as expected (same as in definition). I can ping 192.168.1.3 from my macbook. I cannot ping 192.168.1.2 locally or from my macbook. Any ideas why?

    Read the article

  • SSL with private key on an HSM

    - by Jason
    I have a client-server architecture in my application that uses SSL. Currently, the private key is stored in CAPI's key store location. For security reasons, I'd like to store the key in a safer place, ideally a hardware signing module (HSM) that is built for this purpose. Unfortunately, with the private key stored on such a device, I can't figure out how to use it in my application. On the server, I am simply using the SslStream class and the AuthenticateAsServer(...) call. This method takes an X509Certificate object that has its private key loaded, but since the private key is stored in a secure (e.g. non exportable) location on the HSM, I don't know how to do this. On the client, I am using an HttpWebRequest object and then using the ClientCertificates property to add my client authentication certificate, but I have the same problem here: how do I get the private key? I know there are some HSMs that act as SSL accelerators but I don't really need an accelerator. Also, these products tend to have special integration with web servers such as IIS and Apache which I'm not using. Any ideas? The only thing I can think of would be to write my own SSL library that would allow me to hand off the signing portion of the transaction to the HSM, but this seems like a huge amount of work.

    Read the article

  • Friend WithEvents in VB vs private in C#

    - by serhio
    Hello, friends Who knows, why in vb.net WinForm projects the designer by default use the Friend WithEvents attributes and in C# - private ones. By ex, in a form.designer. .cs private Label Label1; .vb Friend WithEvents Label1 as Label; For WithEvents is more or less clear(for using Handles, apparently). But why Friend in VB and private in C#... Thanks.

    Read the article

  • Bingbot requests from Google IP address

    - by JITHIN JOSE
    We have some suspicious requests to our server, 74.125.186.46 - - [24/Aug/2014:23:24:11 -0500] "GET <url> HTTP/1.1" 200 16912 "-" "Mozilla/5.0 (compatible; bingbot/2.0; +http://www.bing.com/bingbot.htm)" 74.125.187.193 - - [24/Aug/2014:23:24:12 -0500] "GET <url> HTTP/1.1" 200 20119 "-" "Mozilla/5.0 (compatible; bingbot/2.0; +http://www.bing.com/bingbot.htm)" As it shows, user-agent shows it is bingbot. But whois data of IP address(74.125.186.46 and 74.125.187.193) shows it is from google servers. So is it Google,Bing or any other content scrappers?

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >