Search Results

Search found 11896 results on 476 pages for 'smart pro'.

Page 48/476 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • Unable to start GRUB2 on Triple boot Macbook Pro with OS X Lion, Windows 7 and Ubuntu

    - by Shravan
    I installed Windows 7 using Bootcamp. Then I created a partition from the empty space in the Windows partition and another 4GB partition for the linux swap using GParted. I installed Ubuntu 12.04 LTS in the the newly created partition from the Windows partition. Now GRUB2 does not load and I can only see the blinking cursor on the top right when selecting "Windows HD" from the 'option' key at the start up. OS X works fine but nothing else. Could someone please help me fix this? I am attaching the boot-info from the boot-repair tool. http://paste.ubuntu.com/1040169/

    Read the article

  • How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

    - by MoLE
    I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

    Read the article

  • Converting to a mac-book pro for multi disciplined development.

    - by DeanMc
    Hi all, I am in a bit of a bind. I have been contracted to create a small suite of applications for Android, iOS and WP7. Currently I am also on the market for a new notebook for development. Now the issue I have is I can either buy a consumer grade macbook and a laptop or I could just buy an 8gb Ram, SSD, i7 mackbook and virtualise windows 7. I have never used a mac or macbook before so before I go purchase anything I would like to know what your thoughts are on this. Has anyone any experience with this?

    Read the article

  • C redevient le langage le plus utilisé devant Java et C++, d'après le classement des langages de pro

    Le C redevient le langage de programmation le plus utilisé Devant Java et le C++, d'après TIOBE Software TIOBE Software publie chaque mois son classement (le TIOBE Programming Community index) des langages de programmation. D'après cet index, pour la première fois depuis 4 ans, Java perd sa place de langage le plus populaire au profit du C qui retrouve donc le top du classement. Le C "est assez constant au fil des années, il varie entre 15% et 20% de parts de marché depuis presque 10 ans. Donc, la raison principale de cette place de numéro 1 n'est pas une progression du C, mais plutôt la baisse de son concurrent Java", explique l'analyse qui accompagne ce ...

    Read the article

  • SQLAuthority News Were sorry but your computer or network may be sending automated queries. To pro

    I use multiple browser many times when I am working with multiple projects simultaneously. Often I use Google Reader to read few feeds. Recently, I faced the following error and this error will not go. I even restarted my computer and rebooted my network. I am confident that my computer does not have viruses or [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Which iso image do I need to install Ubuntu 12.04 on a Macbook Pro so that it boots using UEFI?

    - by gentmatt
    Unlike with earlier releases, the website is unclear on giving a straight recommendation for installing ubuntu on a mac: http://cdimage.ubuntu.com/releases/12.04/release/ I've read several times, that I should use an alternative image. But this is only offered as 64-bit. However, I'm also told to rather use 32-bit images for better software compability. http://cdimage.ubuntu.com/releases/12.04/release/ubuntu-12.04-alternate-amd64+mac.iso Even though I should only use alternative images, there is offered a standard desktop image which is "adjusted to work properly on Mac systems". http://cdimage.ubuntu.com/releases/12.04/release/ubuntu-12.04-desktop-amd64+mac.iso Question Which image should I take? Do both of these images offer UEFI boot? I've tried both of them already, but both have setup an install with BIOS emulation. This is quite annoying because of the short battery life and high temperatures which are harmful to battery longevity.

    Read the article

  • How to be a pro in several programming languages? [on hold]

    - by trerums
    I love PHP and C# languages and i want to be excellent in both. I like to develop PHP applications using MySQL, Nginx, Memcached and so on technologies. I also like ASP.NET MVC stack and think it's great tools. But each technology requires a lot of time to master it. The same is true for C# web stack - there is a huge amount of things to be mastered like Azure, LINQ, Entity Framework ets. Mastering PHP means knowing how it works under the hood. Mastering C# means knowing CLR implementations on a deep level, knowing MSIL etc/ Where to get time for all this? Maybe this is "jack of all trades"? What can you advice?

    Read the article

  • Intel annonce une puce pour serveurs composée de 32 coeurs, faisant partie de sa future gamme de pro

    Mise à jour du 02.06.2010 par Katleen Intel annonce une puce pour serveurs composée de 32 coeurs, faisant partie de sa future gamme de produits Knights Intel vient d'annoncer une puce pour serveurs composée de 32 coeurs, cadencés à 1.2 GHz, élaborée sur une architecture mêlant des coeurs x86 ainsi que d'autres spécialisés pour répondre aux besoins spécifiques des serveurs à haute performance. Répondant au nom de Knights Ferry, ce processeur est "le plus rapide pouvant traiter plus de 500 Gigaflops de données", d'après son constructeur. Il marque les premiers pas d'une gamme destinée aux serveurs (Knights), qui repose sur une architecture MIC (Many Integrated Cores). Les proce...

    Read the article

  • Surface Pro sera commercialisée entre 899$ et 999$, la tablette x86 de Microsoft officiellement disponible en janvier 2013

    Microsoft dévoile Surface deux modèles de tablettes Windows 8 ARM et Intel Microsoft a ouvert le bal des dispositifs sous Windows 8, et annoncé officiellement le lancement de deux tablettes sous le système d'exploitation. L'OS entièrement repensé, avec une nouvelle interface utilisateur, un support des architectures ARM et plusieurs autres nouveautés est l'occasion pour l'éditeur de se lancer pour la première fois dans la construction de ses propres dispositifs sous Windows. Baptisés Microsoft Surface, les deux modèles de tablettes sur deux puces différentes (ARM et X86) se positionnent comme de sérieux concurrents à l'iPad d'Apple qui domine largement le marché actuellement.

    Read the article

  • BlackBerry 10 en images (3/9) : BlackBerry Balance, une session Pro et une session privée hermétiquement séparées

    BlackBerry 10 en images (1/9) : BlackBerry Flow RIM dévoile les nouveautés au compte-goutte et promet de très grosses surprises Deux jours après les annonces officielles du PDG de RIM, la filiale Française nous a conviés à une démonstration pour nous dévoiler « en vrai » quelques nouveautés supplémentaires de son prochain BlackBerry 10. « Son plus gros lancement de tous les temps », selon David Derrida, le responsable produit. Les voici en images au moment où le code est officiellement gelé. BlackBerry Flow C'est la nouvelle manière d'interagir avec l'OS. ...

    Read the article

  • Hard Disk DRDY error: is it a crash

    - by pranjal
    I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

    Read the article

  • Should programmers do Pro Bono work? where are the code public defenders?

    - by Tj Kellie
    How many projects are people doing based on the Bro Bono publico ideals versus working for the highest wage or potential for a cash-in-buy-out payday? For years lawyers have been called out for excessive gathering of wealth from high bill rates and huge settlement deals, hiring out their knowledge and skills to the highest bidders. People call for them to do more for free, use the laws and their time to defend or further some cause thats in the public's best interest. Is professional software development that different? So many bright people and so much knowledge of complex systems. Do you think that there is enough of a "Pro Bono" movement to solve the social and public problems in the industry right now? If so what are the examples to point to? OLPC? NOTE: Saying that open source software is the same as pro bono misses the point completely. I was looking for specific projects with a social context, not just group-sourcing for free software. Just because your not making anyone pay for your software does not mean its doing anyone any good. I'm not calling out manual enforcement of pro bono work for programmers, really just want some objective opinions and concrete examples of social-minded software/tech development projects like the One Laptop Per Child project. I'm sure open source would be a natural tie-in for some.

    Read the article

  • Does the ASUS P5Q Pro Turbo support Pentium D CPUs?

    - by Omega
    Looking at the ASUS web page as well as others, the Pentium D is not explicitly mentioned as supported on the ASUS P5Q Pro Turbo motherboard. http://ca.asus.com/product.aspx?P_ID=c19zNYHCAXhCqBPq&templete=2 However many sites seem to indicate it is. Is it supported after a BIOS update, or are they simply copy/pasting laundry lists of LGA775 CPUs?

    Read the article

  • If I buy a windows 8 pro from amazon(US), can I activate it in China?

    - by liweijian
    Microsoft do not sell Windows 8's DVD in China, We can only update to Windows 8 from Windows 7 , Vista or Windows XP SP3. However, I am a Ubuntu user, I don't have Windows 7 , Vista or Windows XP SP3 installed in my laptop. I was planning to buy a DVD of Windows 8 Pro from Amazon.com, but I don't know if it can be activated in China. Does anybody know? The customer service of Microsoft is too busy right now.

    Read the article

  • Can the Microsoft Surface Pro drive multiple external monitors?

    - by ahsteele
    I am interested in simultaneously connecting two Dell UltraSharp 2407WFP 24-inch Widescreen Flat Panels to my Microsoft Surface Pro. Currently I am attempting to utilize a StarTech Mini DisplayPort to DisplayPort / DVI / HDMI Multifunction Adapter by connecting one monitor to the adapter via HDMI and the other via DisplayPort. Unfortunately, I am only getting video on the Surface itself and the monitor connected via DisplayPort. Is this StarTech adapter capable of simultaneously driving two monitors? Is the Surface itself even capable of driving two monitors?

    Read the article

  • Does the DisplayPort on the Dell UltraSharp U2311H Monitor work with a MacBook Pro?

    - by GeneQ
    I'm thinking of getting the Dell UltraSharp U2311H monitor which apparently comes with a DisplayPort. (I used the word "apparently" because I find DisplayPort support a little bit too good to be true, coming from Dell. But great news nonetheless if it's really true) I plan to connect it to a Mac Book Pro (2010) via a mini DisplayPort to DisplayPort cable. Has anyone tried this setup? Does it work? Thanks.

    Read the article

  • How to make MAMP PRO secure enough to serve as webserver? Is it possible?

    - by Andrei
    Hi, my task is to setup a MAMP webserver for our website in the easiest way so it can be managed by my colleagues without experience in server administration. MAMP PRO is an excellent solution, but some guys don't suggest to use it for serving external requests. Could you explain why it is bad (in details if possible) and how to make it secure enough to be a full-scale and not-only-local webserver? Is there a better solution?

    Read the article

  • How to make MAMP PRO secure enough to serve as webserver, if possible?

    - by Andrei
    Hi, my task is to setup a MAMP webserver for our website in the easiest way so it can be managed by my colleagues without experience in server administration. MAMP PRO is an excellent solution, but some guys don't suggest to use it for serving external requests. Could you explain why it is bad (in details if possible) and how to make it secure enough to be a full-scale and not-only-local webserver? Is there a better solution?

    Read the article

  • Consumer Priority Service - How many years of coverage should I buy for my Apple MacBook Pro 17"?

    - by jaffsmith
    I recently purchased a Apple MacBook Pro 17" online. It costs me $2299 plus shipping. If the unit should have an issue over the next few years I want to be fully covered so I will be purchasing the Consumer Priority Service extended warranty as well. The online dealer offers a 2 year or a 3 year for about $100 more, Is it worth the extra money for the 3 year warranty?

    Read the article

  • Different DPI on MacBook Pro and external monitors - what options are there?

    - by Ollie G
    I have an external monitor connected to my MacBook Pro, the two screens have different DPIs. Ideally I would like them to be the same, but as this is not the case, the best option I can see is reducing the resolution of the MBP screen to bring its DPI as close as possible to the external monitor. This introduces scaling artefacts on the screen, as LCDs don't look good at non-native resolutions. Is there a standard or best way of handling this, and if not, what other options are available?

    Read the article

  • Emtel Knowledge Series - Q2/2014

    From Cyber Island to Smart Mauritius Cyber Island? Smart Mauritius? - What is Emtel talking about? "With the majority of the population living in urban environments today, the concept of "Smart Cities" has become an urgent necessity. "Smart Cities" refer to an urban transformation which, by using latest ICT technologies makes cities more efficient. Many Governments are setting out ambitious plans to build the cities of the future based on massive connectivity, high bandwidth communications, intelligent sensors and analysis of huge volumes of data. Various researches have shown four key enablers for smart city success - Government leadership, suitable technology infrastructure, solid public-private partnerships and engaged citizens. It is around these enabling factors that telecoms companies can play a vital role in assisting governments to deliver on the smart city vision." The Emtel Knowledge Series goes in compliance with Emtel's 25th anniversary celebrations throughout the year and the master of ceremony, Kim Andersen, mentioned that there will be more upcoming events on a quarterly base. As a representative of the Mauritius Software Craftsmanship Community (MSCC) there was absolutely no hesitation to join in again. Following my visit to the first Emtel Knowledge Series workshop back in February this year, it was great to have another opportunity to meet and exchange with technology experts. But quite frankly what is it with those buzz words... As far as I remember and how it was mentioned "Cyber Island" is an old initiative from around 2005/2006 which has been refreshed in 2010. It implies the empowerment of Information & Communication Technologies (ICT) as an essential factor of growth by the government here in Mauritius. Actually, the first promotional period of Cyber Island brought me here but that's another story. The venue and its own problems Like last time the event was organised and held at the Conference Hall at Cyber Tower I in Ebene. As I've been working there for some years, I know about the frustrating situation of finding a proper parking. So, does Smart Island include better solutions for the search of parking spaces? Maybe, let's see whether I will be able to answer that question at the end of the article. Anyway, after circling around the tower almost two times, I finally got a decent space to put the car, without risking to get a ticket or damage actually. International speakers and their experience Once again, Emtel did a great job to get international expertise onto the stage to share their experience and vision on this kind of embarkment. Personally, I really appreciated the fact they were speakers of global reach and could provide own-experience knowledge. Johan Gott spoke about the fundamental change that the Swedish government ignited in order to move their society and workers' environment away from heavy industry towards a knowledge-based approach. Additionally, we spoke about the effort and transformation of New York City into a greener and more efficient Smart City. Given modern technology he also advised that any kind of available Big Data should be opened to the general public - this openness would provide a playground for anyone to garner new ideas and most probably solid solutions of which no one else thought about before. Emtel Knowledge Series on moving from Cyber Island to Smart Mauritus Later during the afternoon that exact statement regarding openness to and transparency of government-owned Big Data has been emphasised again by the Danish speaker Kim Andersen and his former colleague Mika Jantunen from Finland. Mika continued to underline the important role of the government to provide a solid foundation for a knowledge-based society and mentioned that Finnish citizens have a constitutional right to broadband connectivity. Next to free higher (tertiary) education Finland already produced a good number of innovations, among them are: First country to grant voting rights to women Free higher education Constitutional right to broadband connectivity Nokia Linux Angry Birds Sauna and others...  General access to internet via broadband and/or mobile connectivity is surely a key factor towards Smart Cities, or better said Smart Mauritius given the area dimensions and size of population. CTO Paul Valette gave the audience a brief overview of the essential role that Emtel will have to move Mauritius forward towards a knowledge-based and innovation-driven environment for its citizen. What I have seen looks really promising and with recently published information that Mauritians have 127% of mobile capacity - meaning more than 1 mobile, smartphone or tablet per person - it will be crucial to have the right infrastructure for these connected devices. How would it be possible to achieve a knowledge-based society? YouTube to the rescue!Seriously, gaining more knowledge will require to have fast access to educational course material as explained by Dr Kaviraj Sukon, General Director of the Open University of Mauritius. According to him a good number of high-profile universities in the world have opened their course libraries to the general public, among them EDX, Coursera and Open University. Nowadays, you're actually able and enabled to learn for and earn a BSc or even MSc certification on your own pace - no need to attend classed on campus. It was really impressive to see the number of available hours - more than enough for a life-long learning experience! {loadposition content_adsense} Networking in the name of MSCC As briefly mentioned above I was about to combine two approaches for this workshop. Of course, getting latest information and updates on Emtel services available, especially for my business here on the west coast of the island, but also to meet and greet new people for the MSCC. And I think it was very positive on both sides. Let me quickly describe some of the key aspects that happened during the day: Met with Arnaud Meslier and Kellie, both Microsoft to swap latest information on IT events. Hereby, I got an invite to Microsoft Windows Phone 8.1 Dev Camp. Got in touch with Arvin Lockee, Emtel to check our options to meet with the data team, and seizing the opportunity to have a visiting tour at the Emtel Data Centre. Had a great chat with Avinash Meetoo, Knowledge 7, Kim Andersen and Mika Jantunen about the situation of teaching and learning in general and specifically in the private sector here in Mauritius. Additionally, a number of various other interesting chats... Once again, I'm catching up on a couple of business cards in order to provide more background information about the MSCC, and to create a better awareness of MSCC within the local IT businesses. There is more to come soon!  Resume of the day The number of attendees during this event has been doubled or even tripled this time. The whole organisation has been improved massively and the combination of presentation and summarizing panel discussions was better than during the previous workshop back in February. Overall, once again a well-organised workshop and I'm already looking forward to join the next workshop in Q3. Update End of July we finally managed to visit the Emtel Data Centre in Arsenal. It was an interesting opportunity for some of our MSCC members.

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >