Search Results

Search found 2333 results on 94 pages for 'soylent green'.

Page 48/94 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Windows Proxy Server advice

  - by Scott

  I have a webserver that currently has about 10 IP addresses. I have various clients that require a proxy server to route their internal traffic through. The load is not that great, so I'd like to have this ONE server act as a proxy server for 10 different clients, each client having their own unique IP on the server. The hardware is already setup, but I'm wondering what software solutions you guys recommend? I've looked at WinGate, Squid-Proxy, etc...but am pretty green with this. Maybe there's even a way to have Windows do this natively? I'm running Windows Server 2008, 32 bit.

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• How can I copy and paste formatted text in Excel?

  - by Landy

  Before I ask question, I've searched but only found ways of copy and paste "formatted cell". That's not what I need. I want to use an example to explain my requirement: There are 2 cells in a sheet. Cell_A's text is "aaaaabbbbb", and "aaaaa" is green, and "bbbbb" is red. Cell_B's text is "ccccc" and "ccccc" is black. I want to copy and paste "bbbbb" from Cell_A to Cell_B and keep "bbbbb" in red. But in my environment(Office 2007), "bbbbb" is changed to black as "ccccc", the default format of Cell_B. Is there an easy way to implement my requirement?

  Read the article

• What do light purple color mean in uTorrent

  - by blasteralfred

  I run uTorrent 3.1.2 in my Windows 7 PC. When I download one file, I see some purple colored lines under Files Tab Pieces. Below is an image of what I am telling (little resized); I think that the light green color indicates downloaded parts. But I have no idea about purple lines. The file is a streamable mp3 file. The connection speed is very low, about 5KB/s down and 1KB/s up. The done file size is not progressing in a smooth way (usually changes in KB are visible), it stays as it is for sometime and then changes to a size (changes in MB), and again the same thing. Questions: Why does this happen? What does the purple color mean? Thank you.

  Read the article

• plugging in a 3.3V 50pin laptop HDD to USB?

  - by barlop

  I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

  Read the article

• How to change color of a cell in one sheet if its value increases or decreases from another cell value in a different sheet

  - by Sean Coffey

  I am putting together a workbook with 52 sheets for the weeks in the year. In this workbook there are multiple columns for percentages on each sheet. I want to be able to change the color of each cell based on whethernit increases (green) or decreases (red) from the same cell in the previous sheet. I have the formula i.e. =IF(ISERROR(B4/D4),"0", B4/D4) to calculate my percentages but I don't know how to put the reference in for this change. Any help?

  Read the article

• Ubuntu 10 installer stops after asking for username and password

  - by Jorn

  I am trying to install Ubuntu 10.10. It's running fine, until I get to the step where it asks me to specify my name, computer name, user name and password. I have filled in all those fields and all of them display a green checkmark. However, the Forward button doesn't enable. The installer continues copying files, and when it's done it says Ready when you are... in the status bar. Still, Forward is disabled. Anyone know what the problem could be?

  Read the article

• How can I change a specific website's style?

  - by Darthfett

  I have a specific website I often use (specifically, http://www.pygame.org/), which has an awful color scheme. I would like to change the color scheme of the site, but I haven't been able to find a good tool for the job. Some basic requirements: It should not be universal to all websites, or affect other websites. I want this to be semi-automatic. I don't want to have to re-define the theme for each page of the site. I want to continue to access the site online (I don't want a local copy of the entire site) Not OS-specific (browser-specific is okay) I am currently using Firefox, but I am also happy with Chrome. There may be some limitations on what is able to be done automatically, as the CSS seems to be embedded in the HTML (and some also in the HTML tags). I would like to remove as much of the green as possible. Is there an existing extension/add-on that does this?

  Read the article

• Chrome shows page shifted left

  - by davidsinjaya

  Courtesy of goal.com Check the pointer that I drew. It doesn't point the right arrow (-), however, it looks like hover on that arrow (arrow turns into green color). Moreover, when I press at that area, it will be directed to link that is specified by that button. Another bug is on the scroll bar. The display show the scroll bar is shifted left, so there is a gap. However, the area that can be clicked remain at the right end of the page.

  Read the article

• PHP Runs Very Slow on IIS7. Need Help optimizing our config

  - by Kendor

  Am running a PHP based web app on our Windows 2008 cloud-based server. The app, which runs fine outside of our environment (e.g. a different IIS server), but is VERY slow in our environment. Based on googling this is a relatively common situation. I installed PHP and MySQL via the IIS web deployment method... Here's our setup: Windows 2008 Server Enterprise SP2 (32-bit) Microsoft-IIS/7.0 MySQL client version: mysqlnd 5.0.8-dev - 20102224 $Revision: 321634 $ PHP extension: mysqli Update for IIS 7.0 FastCGI Windows Cache Extension 1.1 for PHP 5.3 I had read elsewhere that ipv6 might be an issue, so I turned this off on the network adapter. The app is using: localhost as its connection Be easy on me, as I'm a bit green about some of these components... Also, rewriting the PHP app or modifying it is NOT an option. I'm reasonably SURE that our config is the issue.

  Read the article

• MSSQL, ASP.NET, IIS. SQL Server perfmon log question

  - by Datapimp23

  Hi, I'm testing a web application that runs on a hypervisor. The database server and the webserver are seperate vm's that run on the same hypervisor. We did some tests and the functions perform ok. I want you guys to look at a screenshot of a permon log of the sql 2005 server on the busiest moment. The webserver perfmon log looks fine and it's obvious that we have enough resources to present the page in a timely fashion. http://d.imagehost.org/view/0919/heavyload http://d.imagehost.org/0253/heavyloadz.jpg Zoomed out The striped blue line maxing out is the Processor que length (scale 100,0) The green line at around value 30 is Available MBytes (scale 0,01) The rest of the counters are visible on the screenshot. The sql server machine has no CPU limitations on the hypervisor resources and has 5 vcpu's and 5 GB RAM. Can someone help me to interpret this log. Thanks

  Read the article

• Dell XPS M1330 - power cable pulled by accident and now it won't turn on

  - by jim

  I have a similar problem to what has been posted on this site about when I plug in my Laptop adapter the green light comes on as expected; but, when I plug it into the laptop it goes out. In my case, I know it's not the adapter because I have 2 and they both experience the same issue. I'm quite certain the problem is a short in the laptop. I was using the laptop today and the power cord was pulled out by accident and now i'm into this predicament. How or what do I check on the laptop to isolate the problem? Thanks!

  Read the article

• Converting an external hard drive to internal

  - by Nathan DeWitt

  I have a WD Elements 1 TB external drive. I'm in a pinch and I need an internal SATA drive. How do I find out if the drive in here is actually a SATA drive? Edit: The WD Elements is a really nice external drive. I gently pried open the top and slid out a 1 TB Caviar Green hard drive. There were four black rubber brackets that slid off easily. One screw removed the SATA -- USB, and then I slid it into my computer.

  Read the article

• Little server for a little network: Asus TS Mini + Windows Home Server or other?

  - by microspino

  Hello, I'm building a little network with 4 computer a plotter, 3 printers an a HP Fax/Scan/Copy/Print machine. The network is connected to the web by a D-Link router/firewall. I would like to add little server to have file sharing (reachable via VPN from outside by a single user-road-warrior), automatic backups. I would like to avoid big electrics bills or, to say It in a green way, I would like to avoid useless power consumption made by a big server with hot-plug, Raid, double PSU because I don't need all this stuff. The server must work 24/7 and the budget is between 400€ and 1000€. I'm evaluating the Asus EEE Box (with XP), a TranquilPC (with XP), a FitPC (again with XP), and an Asus TS Mini (with Windows Home Server). I like the latter but since I'm Europe I don't know where I can buy It. Do you have any suggestion/experience to share with me about: which hardware do I have to buy ? which O.S. ?

  Read the article

• How best to integrate PPA into Debian?

  - by eicos

  I'm working with ZFS on Linux, on my Debian squeeze server. I've found a useful package in an Ubuntu PPA, apparently by one of the ZoL developers, and I would like to integrate it into my package system. However, I am really having a terrible time doing this. It seems like it would be possible if I upgraded my system to the testing branch, but I'd prefer not to do this for obvious reasons. So, what is the One True Way to do this? Or, what is a passable way to do this, i.e. one that does not involve an ice nine-like assimilation of my entire system to testing branch? Edit: Silly question. I clicked the little green "technical information about this package" on launchpad and all was revealed.

  Read the article

• Does a hard drive "working hard", i.e. when defragmenting or otherwise continuously active, significantly affect a laptop's temperature?

  - by Marko

  Trying to diagnose and fix an overheating Acer 5735 laptop, running speedfan and doing general workload to try and cause the overheat conditions. I notice that windows xp is badly fragmented according to defraggler, at 58% fragmentation. So I defrag whilst watching the speedfan window, which was at the start reporting high warning style symbols for all of the sensors. After the defrag, I rebooted and ran a few programs, and even defraggler again and the sensors in speedfan all reported green i.e. not high. Wondering if there is a correlation between windows fragmentation causing the hard drive to work harder and produce more heat inside the laptop? dont want to just assume that the problems are resolved, so either speedfan is not accurate enough or fragmentation can lead to additional hard drive heat? All comments or suggestions welcome.

  Read the article

• Can you set up a Linode VPS as a reseller type scenario?

  - by MAZUMA

  First, I'm a fairly green on this subject. So, go easy. I do web design and development and would like to set up a way to be the central host so to speak for my clients. Currently they are scattered across multiple hosting companies. I've looked at some the cheapy options like a LunarPages and some of the more robust options like RackSpace Cloud and Linode. RackSpace has a reseller program, but it's managed and more at the top end on cost. I'm not seeing any type of reseller program in place for Linode. Can I purchase a higher Linode plan and use Apache2's VirtualHost configuration to handle multiple domains (about 8 domains, but hopefully will grow.). Or, am I not thinking about this correctly?

  Read the article

• Advice for outdoor wifi hardware and topology

  - by Robot

  I haven't setup any wifi networks other than an access point or two at any single location, so I'd like advice on how to setup an outdoor/weatherproof network in an area approximately 150 feet by 200 feet. The interesting thing is there are a pair of pools in the middle of the coverage area. Here is a picture: blue is pool, green is coverage area, yellow is building with wired access. Can anyone advise me on weatherproof APs, antennas and placement for best coverage of the pool deck? I've looked at the Meraki stuff, but I'm thinking it's overkill.

  Read the article

• Issues connecting to a pix 501 via console cable

  - by Bourne

  Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 ports so that's the first element that doesn't look right to me. Console cable light doesn't turn on when cable is plugged in and have tried rebooting it many many times to see the bootup sequence with no result. Also, I cannot connect to it via pdm or console but the traffic is permitted through. Are there any additional troubleshooting steps I could do or should I count it as dead? Thank you.

  Read the article

• Build Advise for Home Web/NAS Server with Ubuntu Server 12.04 [closed]

  - by razor7

  I need to have a personal Webserver with NAS capabilities. The Webserver to test some LAMP projects I develop for clients, and also NAS to be able to stream media to local network. I want to have full control of the box, so I'm planning to build it with some spare parts and Ubuntu Server. The services/software that will run are (remember, is for personal and testing use only): SAMBA/CIFS SSH Server Apache 2 MySQL 5 Mercurial Repo PHP 5.3 Ruby on Rails OwnCloud Dovecot Webmin Postfix PureFTPd ClamAV The Hardware: Intel Dual Core E2180 2.0 GHz MSI P35 Neo Kinkston 1GB DDR2, 667 MSI Nvidia 7300le PCIe x16 256mb RAM HDD SATA WD Green 2TB x2 (RAID-1 with MDADM RAID Controller) 16 GB USB Pendrive (For server system installation) My idea is to build this system, using the pendrive for the Ubuntu Server software, and packages, and the RAID-1 for gross data storage. What do you think? Thanks a lot!

  Read the article

• Can't get sync with SVN to work to put a directory under version control

  - by Chamster

  I've created a directory on our SVN server and added a local directory with my project to it. It got uploaded and seems to be OK. However, I didn't get those cute green (or any others) icons on the file. So I clicked on the project's directory and used "checkout". That wasn't good because I've downloaded ALL of the repository. How can I synchronize my uploaded directory with it's corresponding directory on the server? (It's probably something easy that I've forgot to check in or so...)

  Read the article

• How does one switch tracks in Windows 8.1's XBox Music app?

  - by XBone

  XBox Music Now Playing In the XBox Music app (both app and Windows completely updated) I tried playing a folder full of MP3s from a USB HDD. In the screenshot above the track Sometimes is currently playing (indicated by the small green spectrum analyzer icon to the left). Now suppose I want to start playing the sixth track So Hard, how do I do it without pressing the Next Track button five times? Double-clicking (using touch) doesn't work and selecting the track by swiping left or right doesn't show any Play Now option in the bar that pops up from the bottom. Cannot believe the default music player app is so bad! :o

  Read the article

• NVidia raid 5 array spooling sounds and delay

  - by Chase B. Gale

  I've had a raid 5 array setup with 3 2TB WD Green drives for about 3 years now. Starting last week, when I would access the array for the first time, I hear a loud drive spooling sound and experience a ~5 second delay before being able to access\save files. This behavior happens when I don't use the array for some time (about an hour) and after occurring it doesn't happen again if I continue to access the array. I've run SMART scans on all drives and they come back as being a-ok. What's causing this? Is my array getting close to death?

  Read the article

• How do I force Windows to play sound through the speakers only when a USB headset isn't connected?

  - by Phoexo

  I'm using a speaker set connected through the green audio jack and a headset which I connect through USB. My problem is that every time I connect/disconnect my headset, I have to go through a lot of settings/restart some programs to make the sound go through the speakers again. What I want is to have audio play through the headset when it's connected, but if I disconnect the headset, I want the audio to automatically play through the speakers. For example, if I connect/disconnect the headset while listening to music, I have to restart the application to make the music play through the correct speaker/headset, and it shouldn't be that inconvenient. (I found this somewhat relevant topic, but the problem is that it doesn't really give an answer. (Also, it is 2 years old.))

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >