Search Results

Search found 42302 results on 1693 pages for 'start screen'.

Page 48/1693 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • Booting Error while using 12.04 booting from GRUB

    - by Paul Z.
    my name is Paul. I have encountered an issue relating to GRUB booting and the booting process in general. I have been running Ubuntu 12.04 LTS on my machine for quite a while. Before that, i had (before) 10.04, 11.04, 11.10, etc. I have been running Ubuntu, in general, but more specifically 12.04 for a long time with little to no problems. The problem: Earlier today, i was using my machine and then decided to take a little break. I shut down my machine (laptop, in case anyone was wondering) and left. Later, I came back ready to start it up and continue. I started it up and it took me to the Toshiba screen (like normal) then to the GRUB screen. I guessed that nothing was truly wrong, and chose the first option (something around the lines of: Ubuntu, with linux 3.22.0-35-generic). I waited for a bit and it still displayed the same purple screen. I restarted it and now chose the option like the first but with recovery at the end. Same result. Later, I waited longer and found that my computer came up with a bunch of lines of script. I waited longer but nothing new happened. What are your suggestions as to fix this problem? I will let my computer run overnight with the recovery setting and will let you know what the result is. Until then, please help. Thank you, your time and effort is greatly appreciated!

    Read the article

  • cpu use goes to 100% when I lock the screen

    - by gianni
    Whenever I lock the screen, after a certain amount of time, the cpu and the cpu fan use go up near the limit, and it returns back to normal the moment I unlock the screen again (as shown by psensor). How can I find out what process is responsible for this? I've tried with "top -S", and the result is this... PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2114 me 20 0 326m 104m 40m R 16 2.6 66:50.03 compiz 1234 root 20 0 396m 152m 98m R 6 3.8 20:23.88 Xorg 2204 me 20 0 160m 38m 30m S 4 1.0 0:33.35 yakuake 2446 me 20 0 206m 18m 12m S 4 0.5 6:32.18 psensor 2280 me 20 0 220m 18m 10m S 2 0.5 5:01.60 unity-panel 9138 me 20 0 154m 27m 15m S 2 0.7 0:03.63 plugin-cont 2282 me 20 0 65800 5272 3316 S 1 0.1 4:36.90 hud-service 2143 me 20 0 140m 11m 8352 S 1 0.3 2:50.16 indicator-m 9095 me 20 0 720m 253m 36m S 1 6.4 0:26.34 firefox 2076 me 20 0 7168 3484 828 S 1 0.1 1:46.53 dbus-daemon 2307 me 20 0 55000 5132 3632 S 1 0.1 2:01.55 indicator-a 2557 me 20 0 86328 6028 4576 S 0 0.1 1:44.71 conky 6290 me 20 0 2836 1296 964 R 0 0.0 0:29.64 top 6291 me 20 0 2836 1188 884 S 0 0.0 0:29.49 top 1 root 20 0 3644 1984 1284 S 0 0.0 60:57.76 init specs: ubuntu 12.04 fresh install intel core i5 4gB ram

    Read the article

  • Screen resolution stuck at 1024x768

    - by Dananjaya
    I just updated from Ubuntu 10.10 to 11.04 and have an issue regarding the screen resolution. I have Intel integrated gfx chip and my monitor supports resolutions larger than 1024x768. (in 10.10 I've been using 1280x1024) But as soon as I upgraded, I'm stuck with 1024x768 resolution and seems I can't change it. running xrandr In terminal yields the following results, Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x800 58.1 + 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 59.9 + 1360x768 60.0 1024x768 75.1 72.0 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 1280x1024_60.00 (0xce) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz What maybe the problem? Is it a bug? What kind of steps I should take in order to get a higher resolution? (changing xorg.conf maybe?) Any insight is highly appreciated. Thanks in advance. UPDATE Screenshot after running xrandr --addmode VGA1 1360x768 As you can see, side bar is not completely visible and Ubuntu logo at the task bar is missing. Also when you open an application, the Task bar of the application (where it should go to the top panel) is missing as well..

    Read the article

  • Best books to start with ASP.NET MVC / C# and Visual Studio [closed]

    - by Goma
    Possible Duplicate: ASP.NET MVC book for absolute beginners Hi guys, finally I have made a decision to go with ASP.NET and C# and I hope I have made the right decision. I would like to ask you, the experts in ASP.NET and C#, could you please tell me where should I start learning and will you recommened me learn ASP.NET or ASP.NET MVC? And what about C#, what is the best book for beginners to learn C#? And by the way, how should I start with SQL Server and SQL,etc? Should I pick up a special book or will I learn it with C#? Cheers.

    Read the article

  • No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

    - by Nick
    I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

    Read the article

  • Designing a game - Where to start?

    - by OghmaOsiris
    A friend of mine and I are planning a game together to work on in our free time. It's not an extensive game, but it's not a simple one either. He's working on the story behind the game while I'm working on the graphics and code. I don't really know where to start with the game. We know what the basic type of game it's going to be and how it would be played, but I'm having a hard time of actually knowing where to begin. I have Xcode open but I don't really even know what I should be designing first. What is some advice for this writer's block? Where is a good place to start with a game? Should I design all the graphics and layout before even touching Xcode? Should I program the things I know I'll have difficulty with first before getting to the easy stuff?

    Read the article

  • Lubuntu 12.04 on Acer laptop boots to blank blue screen

    - by WGCman
    My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

    Read the article

  • Disabling hardware checking in the start up

    - by sven
    I have a ubuntu (10.04) on my desktop and it doesn't have monitor. I would like to connect the desktop (ubuntu) via teamviewer from my laptop. However, when the PC is powered, pc gives an error about it could not find monitor and it gets stuck in this error and does not continue. Since the ubuntu started correclty, teamviewer doesnt start to work on ubuntu so that I can not connect to the ubuntu. How can I disable hardware/desktop checking at the startup, so that ubuntu would start normally then I can use teamviewer?

    Read the article

  • Ubuntu 12.04LTS stuck at login mouse and keyboard not responding

    - by user169954
    I have Ubuntu 12.04LTS installed on a dual-booted machine (i5 dual core 8G ram) and it's been working fine, but today for some reason when I logged out and tried to log back in it is stuck at the login page, i.e. the mouse and the keyboard are not responding. The mouse is stuck at the top left corner of my screen, and I can do nothing but to turn the machine off. (I have been using logitech wireless mouse and keyboard.) I can not access the virtual console (Alt-F1 or Cntrl-Alt-F1) either! Here is what I have tried so far: Verified it is not a H/W problem since the mouse and keyboard work fine with windows7 Booted with ubuntu installation dvd and ran trial mode and mouse and keyboard worked fine. Tried bypassing the login screen by booting into recovery mode and editing tty1.conf, but to no avail. I moved .Xauthority .profile and .bashrc from my $HOME to another location so my login would proceed completely by system defaults. But this did not help From recovery mode commandline used to dpkg-reconfigure to switch between gdm and lightgdm. This did not help either. By the way, when in recovery mode as root from command line I mount the filesystem, all apps work fine. Python is Ok, octave is ok, vi is ok etc. I have a feeling if I could only bypass the login screen, and automatically get into the desktop, I will be ok. But I haven't been able to accomplish this either. I desperately need help please. Thank you in advance. Update: So I tried to switch to lightdm by dpkg-configure lightdm. This at least brings me up to the classical linux commandline login prompt but without a gui. Should I install startx? Should I install ubuntu-desktop?

    Read the article

  • Automatically revert to laptop screen when external monitor unplugged

    - by Ryan
    I regularly use an external monitor with my laptop, so when I use it, I usually have the laptop screen disabled when the monitor is connected, and this seems to cause problems when the monitor is disconnected. If the monitor is connected while the laptop screen is disabled, I can't get the X session to show up at all: I can Ctrl+Alt+F1 to open a terminal, and that works fine.. ..but Ctrl+Alt+F7 does nothing. The display is blank, and stays blank. The same thing happens whether I put the computer to sleep with the monitor connected, or if I disconnect while the computer is still awake. Rebooting the computer fixes the issue, as does killing Xorg and starting it again, but both of those are sub-optimal since I lose my current session. I'm currently using the open source graphics driver (xserver-xorg-video-ati). This question looks like it might answer my question, but unfortunately hwinfo is no longer available in the apt repository. Is there a way with current tools to automatically detect when the external monitor is disconnected and switch to the laptop display?

    Read the article

  • Where is the start up file located?

    - by starcorn
    Hello, I want to add some lines which should execute every time Ubuntu boots up, so I don't have to change them manually everytime. I've read in some place that you should edit this file /etc/rc.local. However when I add the lines I want to execute at start up it doesn't run those lines. So I wonder where the start up file is located in ubuntu? Those lines I want to add is to change the sensitivity for the trackpoint One of the lines I want to add: echo -n 250 > /sys/devices/platform/i8042/serio1/serio2/sensitivity

    Read the article

  • how to start fixing bugs in open source softwares

    - by suryak
    I a student and have good knowledge in C programming and like to contribute any open source project which is developed in C. I searched sourceforge and selected 7-Zip because its widely used one and developed using C. I thought to start first by fixing bugs (which was suggested by many people in their websites) and gone through few bugs but couldn't understand how to respond to them and how to start fixing them.. I didn't understand anything. Could you please explain how to approach this.. I have even gone through some files in the source code which I downloaded but didn't understood anything. Please help me!

    Read the article

  • How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

    - by Paul Swartout
    I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

    Read the article

  • Ubuntu 13.04/13.10 - low graphics mode/black screen after login

    - by Richard Stokes
    Since last week, my Ubuntu 13.04 installation started booting up in low graphics mode out of nowhere. I tried a number of solutions found on this site but to no avail. The other night, I decided to upgrade to 13.10 to see if the issue would be fixed in the process. Since then, the system starts fine, but when I login to my account, I'm just presented with a black screen. I switched to the terminal and did any necessary updates, but to no avail. I don't even know where to start debugging this issue, so I'd appreciate if someone could point me towards the first place to start looking?

    Read the article

  • GWT start-up portlet for Oracle WCI

    - by Lyudmil Pelov
    to all GWT fens,if interested on creating AJAX Portlets for Oracle WebCenter Interaction Portal, I create a project on Google Code, which is something like start-up project. This project contains the basics you need to start a GWT portlet implementation for the WCI Portal. Before you check out the project, make sure that you install the GWT Eclipse Plugin.The Google Code project calls Interactions. You can check out as a guest, but you will be not able to commit changes. If you would like to commit changes or implement some new ideas, do not hesitate to contact me.regards

    Read the article

  • Some applications (Anki, Okular, Calibre) start very slowly

    - by k1U
    When I start one of the applications mentioned in the title from the terminal, I get this: Registered DEC: true Error in contacting registry "org.freedesktop.DBus.Error.NoReply" "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." Could not query active accessibility event listeners. Registered event listener change listener: true Currently I am running 12.04 This problem started a couple of days ago, shortly after I've installed okular from within the software center. by "slow" I mean it takes about 30 seconds. Other applications like chromium start instantly.

    Read the article

  • Cannot start ubuntu-desktop

    - by Jack
    I am mainly a Windows technician and am trying to install ubuntu server. Everything worked fine and I can log in using the shell but when I installed ubuntu-desktop it just refuses to start? I did try startx and I get the message "server already running" I tried "start gdm" (what is this supposed to do?) and it comes back with "Job is already running: gdm" I know that the server version is not really for ubuntu-desktop but all our other servers are like that and I want it, is there any help out there? Ps. the server is running on a VM install that my IT department made for me and I connect to the machine shell using "Tera Ter Web 3.1" Thank you Jack

    Read the article

  • Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

    - by Virulan
    Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

    Read the article

  • Intel N10 graphics

    - by Rapsag1980
    Español: Buen día. Instalé en una notebook ubuntu 12.04 pero me da el problema que solamente me da dos resoluciones de pantallas 800x600 y 1024x768... En la primera se ve muy grotesca la pantalla y en la segunda se ve bien, pero falta un pedazo de pantalla arriba y abajo... He tratado de buscar información sobre el tema pero parece uno de esos "bugs" que no han conseguido ser erradicados... Intenté hacer el Xorg.conf y esas cosas y nomas no se puede... Recurro a su sapiencia y experiencia en este tipo de problemas... La mini es una Lanix Neuron lt, procesador intel atom n450 y la tarjeta Intel corporation N10 family integrated graphics controller.... Inglés: Good day. I installed ubuntu 12.04 on a notebook but I get the problem that only gives me two screen resolutions of 800x600 and 1024x768 ... The first screen looks very grotesque and the second looks good, but missing a piece of screen up and down ... I tried to find information on the subject but it seems one of those "bugs" that have failed to be eradicated ... I tried to do the Xorg.conf nomas and stuff and you can not ... I appeal to your wisdom and experience in this kind of problem ... The mini is a Neuron Lanix lt, Intel Atom N450 processor and the Intel integrated graphics family corporation N10 controller ....

    Read the article

  • Multitouch screen not detected on Asus Taichi 21DH71

    - by geekfreak
    I just bought this Ultrabook "Asus Taichi 21 DH71". This has Intel 3rd generation i7 processor and 4gb ram with 256 gb SSD. The main feature is that it is a hybrid machine. Naming it has dual screens. When the lid is closed it can be used as a tablet and when lid open it can be used as a notebook. This machine can also be used with the two screens on at the same time. I used ubuntu many years ago and loved it. But I never tried any linux later. My questions are Does the new version of Ubuntu support the Multitouch interface? Will it work specifically on this machine? Will Ubuntu support gestures on multi touchpad? Update 2/22/2013 I did try the latest 64bit Ubuntu(12.10) from live usb and noticed that it couldn't detect the tablet screen. Everything else worked seamlessly. Do you guys think the tablet screen would be detected if I make a complete installation on to the notebook? Please help guys..

    Read the article

  • Dual booted Windows 7 freezes after login screen

    - by Cathal
    First-time Linux user, using a Packard Bell Easy Note TS laptop. My problem arose after I dual boot installed Ubuntu 12.04 on Windows 7 via WUBI. I backed up all my data, and reinstalled Windows from factory settings on the recovery partition. When I first tried to install Ubuntu I mistakenly closed the lid at the start of the installation, stopping it. After that I rebooted, and my second installation attempt went without a hitch. Ubuntu works perfectly, the data on the partitions seem to be fine. My problem is I can't log back in to Windows 7. After selecting it in GRUB, and then in the Windows 7/ WUBI choice on boot, it loads up perfectly til the user log in screen. After the password is inputted, it stalls on the "Welcome" busy screen. This happens in Safe mode as well. Startup repair can't find a problem and neither can CHKDSK. System restore and Last known good config have no effect either. If anyone could help me out, I'd be real grateful. edit in response to the question below, since I don't know how to comment: Windows was installed first and its partitions are the first on the list. Should I move the windows partitions to after the Linux ones on the disk? Thanks for your help.

    Read the article

  • Various crashes in 12.04 after upgrade and fresh install

    - by stefan
    Ubuntu drives me crazy. Since I upgraded from 11.10 64-bit to 12.04 Ubuntu crashes regularly. One time the crash report tells me that Skype is the faulty app, another time it was Opera, and today the crash report tells me Xorg crashes. I read that it can be caused by a faulty upgrade so I made a clean new installation of 12.04 32-bit. But the error is the same. I had a look in the log files with a friend but we did not find a answer. This morning the crashes happened like this: Boot Auto-start Thunderbird Start VLC for radio Start Opera Working a while (30 minutes) Starting Skype 2 minutes later, the system freezes, the monitor turns black, a login screen appears and I enter my password. The desktop comes up again and the crash report pops up.

    Read the article

  • How to start vnc server on-demand (not on boot)

    - by QRohlf
    I have a vps which has the basic xfce environment & tightvncserver installed. I would like to have tightvncserver automatically start whenever I initiate a connection to the port it runs on (in my case, 5901). I've seen posts about using inetd or xinetd to do this, but I've also seen lots of posts saying that (x)inetd is not included in Ubuntu for a reason, and that it's a bad idea to use it. Anyways, I'm looking for a way to auto-start tightvncserver whenever there's an incoming connection to port 5901, preferably with as few dependencies as possible

    Read the article

  • Ubuntu Unity (64-bit) Bugs on Nvidia dual screen [closed]

    - by Kristofer
    On my work computer I have upgraded 10.04 to 10.10 and now to 11.04. Upgrades have mostly worked well and the dual screen setup is almost working. There are however a couple of annoying bugs which I tried to report but the bug reporting tool told me to ask about the bugs here. Here's what I have found: Auto-hide stops working. It doesn't seem to matter which application is maximised/covering the dock, it just stays on top. I have tested changing the autohide settings with no result. Scenario: One maximised window on each screen. If I now try to drag the window that doesn't have focus by dragging the top of the window nothing happens. I can also not give the window focus by clicking the top bar, I have to click inside the window and then I can drag the window. If I unmaximise the window with focus it does work and I can both change focus and drag the window directly by clicking the top of the maximised window. Any bug fixes coming for these issues? Any work-arounds?

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >