Search Results

Search found 61223 results on 2449 pages for 'windows forms'.

Page 48/2449 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • Windows RT Secured Only By Microsoft

    That disconcerting news is what Mark Hachman is reporting for Read Write Web. One can more or less safely assume that Microsoft will come up with its own antivirus software for Windows RT. Still, this is a rather unusual state of affairs; why is the company doing this? Hachman explains that apps for the Windows RT operating system can run just fine on Windows 8, but the reverse is not true, unless the Windows 8 app has been specially compiled to run on both Windows 8 and Windows RT. The difference apparently stems from the processors for which the two systems have been optimized. Windows 8 ru...

    Read the article

  • Dual Booting Windows 8 and Ubuntu 12.10 - thinkpad x230

    - by user110703
    I am having problems getting grub to load Windows 8 properly after installing Ubuntu 12.10 and Windows 8 on a solid state drive. Here's what I did: Fresh install of Windows 8 using USB recovery drive (partitioned SSD for UEFI) -- Tested windows install and it worked fine Built bootable USB with Ubuntu 12.10 64bit and installed Ubuntu -- Used Ubuntu's installer to partition the Windows 8 partition and install there Reboot - try to load windows 8 from grub -- Ubuntu loads correctly; windows load reports various problems with permissions and not being able to find files - I'll update what the actual errors are Tried to fix the boot problem using boot-repair: -- here's the output: http://paste.ubuntu.com/1384522/ So, this is my first time trying to setup a dual boot system and I think that UEFI is the main culprit in getting this to work correctly. What do I need to

    Read the article

  • HTG Explains: What Is Windows RT and What Does It Mean To Me?

    - by Chris Hoffman
    Windows RT is a special edition of Windows 8. It runs on ARM and you’ll find it alongside Intel x86 machines in stores, but you’ll be surprised just how much Windows RT differs from the Windows you know. Windows RT is so different  that Microsoft has told Mozilla Windows RT “isn’t Windows anymore.” If you’re looking to buy a Windows system in stores, you should know the difference between Windows RT and the other editions of Windows 8. Image Credit: Kiwi Flickr HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization

    Read the article

  • Windows Error After Wubi Install

    - by user106563
    The initial install on my laptop was Windows 7. I installed Wubi on Sunday - the install seemed fine. I was able to log in and use both Ubuntu and Windows. On Monday I started receiving the following error in Windows: windows cannot access the specified device path or file This occurs on every link I click on - essentially rendering Windows unusable. I do not experience the same problem when Windows is started up in safe mode. I have tried numerous virus scans (Malware bytes, Avg, AdAware) and have removed various trojans etc. Windows is still unusable. Ubuntu seems fine so far. My question is, can this error be attributed to the Wubi install?

    Read the article

  • Wubi on Windows 8 without secure boot?

    - by emersonhsieh
    I have a MacBook Pro. I've heard rumours that if Windows 8 is going to have this thing called "Secure boot", Wubi cannot work. At first I plan to install Ubuntu on my mac via Wubi(and windows via bootcamp), but since I can't find my Windows 7 Installation CD, I installed Windows 8 on my Mac and installed Ubuntu on a VM. Then suddenly Windows 8 Release Preview was released today so I decided to install over my existing copy of Windows 8 Consumer Preview. When I went to the Windows 8 Upgrade assistant, it said that the firmware on my Mac doesn't support Secure booting. I don't even know what it means, but since the Upgrade assistant said that the Mac cannot support secure booting, can I install Wubi successfully? And what is secure booting anyways? Any help will be appreciated.

    Read the article

  • Truecrypted Windows 7 missing in Grub2 after upgrade

    - by user287545
    I have an encrypted dual boot Windows 7/Ubuntu System and upgraded my Ubuntu today. Everything went smooth but my Windows is not shown in the Grub2-List anymore. Starting up I have the Truecrypt Bootloader and after entering the Password I get to Grub (now Grub2). There my Windows 7 entry is missing now. Here is my report: http://paste.ubuntu.com/7569182/ Updating Grub did nothing to it. My guess is that within Ubuntu it does not recognize my Windows Installation on sda1 anymore. I can't mount it aswell. I can only mount it via Truecrypt itself. I think I might have to manually insert the menu item for Windows into that Grub config file. I guess that after entering the password in the truecrypt bootloader it would be possible to start Windows if the item was there - just a guess though. Edit: I basically followed these steps to set up my system: Dual Booting Windows 7 with Ubuntu 12.04LTS with Truecrypt

    Read the article

  • two windows loader in grub

    - by Lorenzo
    i'm facing a strange problem about which - googling- i didn't find any solution. This is the issue. I've restored windows 7 trught its hidden partition then i installed kubuntu 12.04 which didn't installed the grub loader. Hence via the same usb-live i used boot-repair which have found all the system that are: kubuntu + its recovery mode windows 7 /dev/sda1 windows 7 /dev/sda2 windows 7 recovery I don't know why i have got 2 windows loader, but they seem (to me) to load the same system. I tryied to see what is there written in the grub.cfg and it seems that the "root" directory for the two system is different eventhought when i load from sda1 i got "Avvio windows" (italian laguange that i choosed) and on sda2 i got "start windows" in the english language when the splash screen load. Can you PLEASE help me removing one of the two entry? i can not really see them, i want only one but i don't know how to act.. Thank you very much indeed. Lorenzo

    Read the article

  • How to enable Start Button in Windows 8?

    - by Gopinath
    Microsoft taken a bold move in removing Start button in Windows 8 operating system and replacing it with Metro styled Start screen. Since the early days of Microsoft Windows, all the PC users are used to Start button and missing it all of sudden in Windows 8 may disappointed many. If you are one among the users who is disappointed with missing Windows 8 button, here is a quick way to enable it back To restore Start menu in Windows 8 all you have to do is to download and install ViStart application. This freeware application magically brings back the missing Start orbit and also when you press Windows Key, it opens up the Start menu instead of switching to Windows 8 Start Screen. Note: While installation the application may ask you to install toolbars and third party application, I suggest you to uncheck them as they may change your search settings and default browser.  They may not be harmful but effects your browsing experience.

    Read the article

  • Microsoft Offers Cheap Windows 8 Upgrade

    Though the software giant hasn't answered all of the questions, Computerworld collected many of them in one place and included the answers. You can also visit Microsoft's blog post for the details. Starting at general availability, if your PC is running Windows XP, Windows Vista, or Windows 7 you will qualify to download an upgrade to Windows 8 Pro for just $39.99 in 131 markets. And if you want, you can add Windows Media Center for free through the 'add features' option within Windows 8 Pro after your upgrade, the Microsoft blog post helpfully states. If you choose to upgrade, the Windows 8...

    Read the article

  • Windows explorer locks files

    - by John Prince
    I'm using Office 2010 & Windows 7 Home Premium 64-bit. My problem starts when I attempt to save e-mail messages to my PC that I have received via Outlook (my ISP is Comcast). I'm using the default .msg file extension option when I attempt to save these e-mails. The resultant files are locked and do not show the normal "envelope" icon. Instead, it’s a “blank page” icon with the right upper corner folded in. These files refuse to open either by double clicking on them or right clicking and trying to open them with Outlook. And when I return to Outlook, I discover that Outlook is now hung up and I have to close it via the Task Manager. To make matters worse, I’ve also discovered that every e-mail message that I've saved on my PC over the years has also somehow become locked and their original "envelope" icon has been replaced with the "blank page" icon. I found and installed an application called LockHunter. As a result, when I right click on a saved and locked e-mail message, I’ve given an option to find out what's locking it. Each time I'm told that the culprit is Windows explorer.exe. When I unlock the file the normal envelope icon is sometimes displayed (but not always) but at least the file can then be opened. But the file is still “squirrely” as it can’t be moved or saved to a folder until it’s unlocked again. On this second attempt, LockHunter says it’s now locked by Outlook.exe. By the way, I don't have this issue when I save Word, Excel & PowerPoint files; only with Outlook. I've exhausted every remedy that I can think of including: making sure that the file and folder options are checked to always show icons and not thumbnails; running the Windows 7 & Office 2010 repair options which find nothing amiss; running a complete system scan with Windows Malicious Software Removal Tool with negative results; verifying that Outlook is the default for opening e-mails; updating all of my applications via Secunia Personal Software Inspector; uninstalling every application that I felt was unnecessary; doing a registry cleanup via CC Cleaner; having Windows Security Essentials always on (it did find one Java Trojan recently which was quarantined and then deleted); uninstalling a bunch of non-Microsoft shell extensions; and deactivating all of the Outlook Add-ins and then re-activating each one. None of this solves the problem. I’d welcome any advice on how to resolve this.

    Read the article

  • Surface RT: To Be Or Not To Be (Part 1)

    - by smehaffie
    So the Surface RT has been out for 9 months and Microsoft just declared a $900 million dollar write-down. So how did this happen and what does it mean for Microsoft’s efforts to break into the tablet market? I have been thinking a lot about most of the information below since the Surface product line was released. If you are looking for a “Microsoft Is Dead” story, then don’t read any further. But if you want an honest look at what I think led Microsoft to this point and what I think can be done to make Surface RT devices better, then please continue reading. What Led Microsoft To The $900 Million Write-Down Surface Unveiling:Microsoft totally missed the boat when they unveiled the Surface product line on June 18th, 2012. Microsoft should’ve been ready to post the specifications of both devices that night. Microsoft should’ve had a site up and running right after the event so people could pre-order the devices. This would have given them a good idea what the interest was in each device.  They could also have used this data to make a better estimate for the number of units to to have available for the launch and beyond.  They also lost out on taking advantage of the excitement generated by the Surface RT and Surface Pro announcement. They could have thrown in a free touch keyboard to anyone who pre-ordered. The advertising should have started right after the announcement and gotten bigger as launch day approached. Push for as many pre-order as possible and build excitement for the launch. Actual Launch (Surface RT): By this time all excitement was gone from the initial announcement, except for the Micorsoft faithful. Microsoft should have been ready to sell the Surface in as many markets as possible at launch. The limited market release was a real letdown for a lot of people.  A limited release right after the initial announce is understandable, but not at the official launch of the product. Microsoft overpriced the device and now they are lowering it to what it should have been to start with. The $349 price is within the range I suggested it should be at before pricing was announced. (Surface Tablets: The Price Must Be Right). Limited ordering options online was also a killer. User should have been able to buy the base unit of each device and then add on whatever keyboard they wanted to (this applies more to the Surface Pro).  There should have also been a place where users could order any additional add-ins that they wanted to buy (covers, extra power supplies, etc.) Marketing was better and the dancing “Click In” commercial was cool, but the ads comparing the iPad with Siri should have been on the air from day one of the announcement (or at least the launch).  Consumers want to know why you tablet is better, not just that is has a clickable keyboard and built-in kickstand. They could have also compared it to some of the other mid-range tablets if they had not overprices it to begin with. Stock Applications (Mail, People, Calendar, Music, Video, Reader and IE): This is where Microsoft really blew it. They had all the time in the world to make these applications the best of breed and instead we got applications that seemed thrown together.  Some updates have made these application better, but they are all still lacking in features that should have been there from day one. This did not help to enhance a new users experience any. ** I will admit that the applications that were data driven were first class citizen’s and that makes it even more perplexing why MS could knock it out of the park with the Weather, Travel, Finance, Bing, etc.) and fail so miserably on the core applications users would use the most on a tablet. Desktop on Tablet: The desktop just is so out of place on the tablet  I understand it was needed for Office but think it would have been better to not have the desktop in Windows RT, but instead open up the Office applications in full screen mode, in a desktop shell (same goes for  IE11).That way the user wouldn’t realize they are leaving Metro and going to the desktop. The other option would have been to just not include Office on Windows RT devices. Instead they could have made awesome Widows Store Apps for Word, Excel, OneNote and PowerPoint. In addition, they could have made the stock Mail, People, and Calendar applications contain all the functions that Outlook gives desktop users. Having some of the settings in desktop mode and others under “Change PC Settings” made Windows RT seemed unfinished and rushed to market. What Can Be Done To Make Windows RT Based Tablets Better (At least in my opinion) Either eliminate the desktop all together from Windows RT or at least make the user experience better by hiding the fact the user is running Office/IE in the desktop. Personally I ‘d like them to totally get rid of it and just make awesome Windows Store Application version of Word, Excel PowerPoint & OneNote.  This might also make the OS smaller and give the user more available disk space. I doubt there will ever be a Windows Store App versions of Office, but I still think it is a good idea. Make is so users can easily direct their documents, picture, videos and music to their extra storage and can access these files from the standard libraries.  A user should not have to create a VM on their microSD card or create symbolic links to get this to work properly. Most consumers would not be able to do this. Then users get frustrated when they run out or room on their main storage because nothing is automatically save to their microSD card when saved to libraries.  This is a major bug that needs to be fixed, otherwise Microsoft’s selling point of having a microSD slot is worthless. Allows users to uninstall and re-install any of the Office product that come with the Surface. That way people can free up storage space by uninstalling the Office applications they do not need. Everyone’s needs are different, so make the options flexible. Don’t take up storage space for applications the user will not use. Make the Core applications the “Cream of the Crop” Windows App Store applications. The should set the bar for all other Store applications. Improve performance as much as possible, if it seems to be sluggish on a tablet consumer will not buy it. They need to price the next line of Surface product very aggressive to undercut not only iPad but also Android low end tablets (Nook, Kindle Fire, and Nexus, etc.) Give developers incentives to write quality applications for the devices. Don’t reward developers for cranking out cookie cutter, low quality applications. I’d even suggest Microsoft consider implementing some new store certification guideline to stop these type of applications being published. Allow users to easily move the recover disk “partition between their microSD card and main storage. My Predictions for the Surface RT and Windows RT I honestly think even with all the missteps MS has made since the announcement  about the Surface product line, that they are on the right path. I was excited the Surface tablets when they were announced, and I still am. The truth be told, Windows 8 on a tablet (aka: Windows RT) is better than both iOS and Android. My nephew who is an Apple fan boy told me after he saw and used Windows 8 (he got the beta running on his iPad), that Windows 8 kicked Apples butt as a tablet OS. So there is hope for all Windows RT based tablets. I agree with my nephew and that is why whenever anyone asks me about my Surface, I love showing it off and recommend it. The 6 keys to gaining market share in the tablet market are; Aggressive pricing by both Microsoft and their OEM’s Good quality devices put out by Microsoft and their OEM’s (there are some out there, but not enough) Marketing, Marketing, Marketing from both Microsoft and their OEM’s (Need more ads showing why windows based tablets are better than iPads and Android tablets) Getting Widows tablets in retails stores all over, and giving sales people incentive to sell them. Consumers like to try electronics out before they buy them, and most will listen to what the sales person suggest. Microsoft needs sales people in retail stores directing people to buy windows based tablets over iPads and Android tablets. I think the Microsoft Stores within Best Buy is a good start, but they also need to get prominent displays in Walmart, Target, etc.. Release a smaller form factor Surface, Hopefully the 8”-10” next generation Surface is not a rumor. Make “Surface” the brand name for all Microsoft tablets and hybrid devices that they come out with. They cannot change the name with each new release.  Make Surface synonymous with quality, the same way that iPad  is for Apple. Well, that is my 2 cents on the subject. Let me know your thoughts by leaving a comment below. Soon to follow will be my thought on the Surface Pro, so keep an eye out for it. var addthis_pub="smehaffie"; var addthis_options="email, print, digg, slashdot, delicious, twitter, live, myspace, facebook, google, stumbleupon, newsvine";

    Read the article

  • Windows 7 intermittently drops wired internet/lan connection.

    - by CraigTP
    In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

    Read the article

  • Windows Server Backup fails to backup Hyper-V VM with "Access is denied"

    - by Sebastian Krysmanski
    I'm trying to use Windows Server Backup on my Windows Server 2012 box to backup my Hyper-V VMs. I created a backup job but each job ends with some "Access is denied" errors. One of my VMs (Linux Server) is backed up properly. All others (one Windows 8, one Linux) are not (or at least it seems that way from the looks of the log file below). How can I solve this problem? Here's the log I'm getting: Error in backup of D:\ during read: Error [0x80070005] Access is denied. Application backup Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: C435964E-C07A-4958-BA73-A04C6583280F Caption : Backup Using Saved State\Alter Server Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: E780F138-9676-42FB-821C-4561B9B263DC Caption : Backup Using Child Partition Snapshot\Windows 8 Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: Host Component Caption : Host Component Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null)

    Read the article

  • routing table permissions under Windows 7 and openvpn

    - by pilcrow
    My ovpn client, 32-bit OpenVPN 2.1.1 on 64-bit Windows 7 Pro, cannot accept routes pushed to it by my remote endpoint ovpn server. This happens even if I invoke OpenVPN as a member of Administrators, and whether or not I've specified script-security 2 (as suggested by [this question][2]). Mon Mar 29 12:57:19 2010 Notified TAP-Win32 driver to set a DHCP IP/netmask of 192.168.254.3/255.255.255.0 on interface {8BE2E9CF-F4C9-4A5E-98FD-E12DF1B6C3A4} [DHCP-serv: 192.168.254.3, lease-time: 86400] Mon Mar 29 12:57:19 2010 NOTE: FlushIpNetTable failed on interface [14] {GUID} (status=5) : Access is denied. Mon Mar 29 12:57:24 2010 TEST ROUTES: 8/8 succeeded len=8 ret=1 a=0 u/d=up Mon Mar 29 12:57:24 2010 C:\WINDOWS\system32\route.exe ADD 172.20.1.0 MASK 255.255.255.0 192.168.254.1 Mon Mar 29 12:57:24 2010 ROUTE: route addition failed using CreateIpForwardEntry: Access is denied. [status=5 if_index=14] Mon Mar 29 12:57:24 2010 Route addition via IPAPI failed [adaptive] Mon Mar 29 12:57:24 2010 Route addition fallback to route.exe Mon Mar 29 12:57:24 2010 ERROR: Windows route add command failed [adaptive]: returned error code 1 ... and so on for each specific route the server pushes out. It doesn't seem right to me that the administrative user, the one configured at Windows 7 install time, should need further privileges. What am I missing?

    Read the article

  • Windows Update Agent Update Failed

    - by Adrian Godong
    I'm trying to install the latest version of Windows Update Agent, v7.2.6001.788, and the installation failed with error code of 0x800b0100. Running Windows Server 2008 SP1. The relevant WindowsUpdate.log section: 2009-08-03 16:17:49:334 3544 d28 Misc =========== Logging initialized (build: 7.2.6001.788, tz: +0100) =========== 2009-08-03 16:17:49:334 3544 d28 Misc = Process: d:\fcc0f96e893296900e6501a601\wusetup.exe 2009-08-03 16:17:49:332 3544 d28 Setup Windows Update Client standalone setup : resource dll path is d:\fcc0f96e893296900e6501a601\en\wusetup.exe.mui 2009-08-03 16:17:49:335 3544 d28 Setup Evaluating CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Core-TopLevel.cab" 2009-08-03 16:17:49:556 3544 d28 Setup Package will be installed 2009-08-03 16:17:49:556 3544 d28 Setup Evaluating CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-ActiveX.cab" 2009-08-03 16:17:49:580 3544 d28 Setup Package will be installed 2009-08-03 16:17:49:580 3544 d28 Setup Evaluating CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Aux-TopLevel.cab" 2009-08-03 16:17:49:665 3544 d28 Setup Package will be installed 2009-08-03 16:17:49:709 3544 d28 Setup Windows Update Client standalone setup : eula file path is d:\fcc0f96e893296900e6501a601\en\eula.rtf 2009-08-03 16:17:52:337 3544 de0 Misc WARNING: LoadLibrary failed for srclient.dll with hr:8007007E 2009-08-03 16:17:52:338 3544 de0 Setup Installing CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Core-TopLevel.cab" 2009-08-03 16:17:53:895 3544 de0 Setup WARNING: CBS operation failed, error = 0x800B0100 2009-08-03 16:17:53:898 3544 de0 Setup WARNING: Install of setup package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Core-TopLevel.cab" failed, error = 0x800B0100 2009-08-03 16:18:04:976 3544 d28 Setup wusetup has finished. Exit code is 0. Reboot is NOT needed I think something went wrong twhen loading the srclient.dll. Things that I have done and still no fix: msiexec /unregister and msiexec /register regsvr32 wuapi.dll Run CheckSUR tool and restart

    Read the article

  • Centralized Windows/Mac Patch Management that is easy to use

    - by BiggsTRC
    I'm looking for advice on what patch management solutions you would recommend based upon your experience. I'm also looking for which ones you would not recommend based upon your experience. We have a mixed network of Windows and Mac clients. Our central servers are all Windows servers, although I have considered putting in a Mac server to better handle our Mac clients. The issue we are facing currently is that we need to maintain the patches on all of our third-party applications. Right now we use WSUS, which handles with patching of Windows and some Microsoft products but that is about it. I need something to cover the other applications, specifically things like Adobe products (Reader, Flash, Dreamweaver, etc.) Our network isn't that big (maybe 200 clients) and I don't have a person to dedicate just to patching and maintaining a patch management solution. Thus very large and complicated solutions like System Center are most likely out. I have recently been looking at Dell's Kace K1000 solution (http://www.kace.com/products/systems-management-appliance/). It seems simple and it provides a lot of tools in one package that I would like/need as well. I like the fact that it is self-contained in an appliance and that it is designed for solutions like mine. However, I'm not sure if this is the best solution. I've also looked some at Shavlik's Netchk solution (http://www.shavlik.com/netchk-protect.aspx) but I don't need an anti-virus product. However, it looks like they might have a very good patch database. My question is this: What are your thoughts on these to products? Are there better products out there? Are there issues that I'm not considering? I want something that is very good at patching a broad range of products, that is simple to use, that takes a minimal amount of management (like WSUS), and that (hopefully) works with Mac and Windows.

    Read the article

  • Windows 7 Media Center PC not displaying MKV files properly

    - by David
    Does anyone know why Windows Media Center wouldn't correctly display a 16x9 video? I just upgraded my home-built HTPC from Vista Ultimate (hey, it was a giveaway) to Windows 7 Ultimate - clean install. After that, I installed the Divx7 beta (to get .MKV support) and AC3filter (so I could HEAR the MKV files). Previously, under Vista Ultimate (32 bit), I had Arcsoft's Total Theater Pro for playing Blu-Rays and MKV decoding under Media Center. Now when I play a 720p 16x9 MKV file, I get some 'letterboxing' - like it's halfway between 4x3 and 16x9 - with the aspect ration looking alightly squished as a result. Here's the wierd part. If I use the Media Center connection software in my XBox 360 - it plays perfectly, filling the 16x9 screen edge-to-edge, just like Vista's WMC software USED to. Of course, beats the network up because the XBox goes to the HTPC, the HTPC goes to my WHS machine to fetch the data, it comes back to the HTPC, gets transcoded and streamed back to the Xbox. I'm running the latest drivers for an NVidia card (as fetched by Windows 7). I have no idea WHY this is because if I play "ordinary" (i.s. SD) Divx files that are 16x9, they play just fine, scaled right up to my screen's edges. It puzzles me as to why the same machine that properly converts the bits for the Xbox can't display/scale them properly for the attached display. Mind you, Windows Media Player exhibits the same symptoms. Ideas?

    Read the article

  • Windows XP Installation problems

    - by Samurai Waffle
    I'm having trouble installing Windows XP on a computer... My friend gave me her old computer, it was riddled with viruses and ran extremely slow. I did my best to clean it out, and after a bit I discovered it had a boot sector virus. So I downloaded the Ultimate Boot CD (installed it on a flash drive), and ran Darik's nuke and boot to completely wipe the hard drive. I then tried to reinstall Windows XP from a USB drive... It doesn't work. The computer just stalls and never boots. The computers dvd drive doesn't work, so I borrowed a spare drive that another friend had, and tried to run a Windows XP cd. For a bit I got the stop 7B error, but now it just stalls like the USB drive does. Since then I've booted back into the Ultimate Boot CD, and ran partition magic. Repartitioned the Hard Drive, and copied the files on the Windows cd to the hard drive. I was wondering if there is any way I can make it run the setup.exe off the hard drive. I have the UBCD at my disposal, but have yet to come up with a way to do it. Any help is greatly appreciated.

    Read the article

  • Why are folders disappearing in Windows XP?

    - by XenoFoxx
    I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the Windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and Windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

    Read the article

  • Does Windows 7 Authenticate Cached Credentials on Startup

    - by Farray
    Problem I have a Windows domain user account that gets automatically locked-out semi-regularly. Troubleshooting Thus Far The only rule on the domain that should automatically lock an account is too many failed login attempts. I do not think anyone nefarious is trying to access my account. The problem started occurring after changing my password so I think it's a stored credential problem. Further to that, in the Event Viewer's System log I found Warnings from Security-Kerberos that says: The password stored in Credential Manager is invalid. This might be caused by the user changing the password from this computer or a different computer. To resolve this error, open Credential Manager in Control Panel, and reenter the password for the credential mydomain\myuser. I checked the Credential Manager and all it has are a few TERMSRV/servername credentials stored by Remote Desktop. I know which stored credential was incorrect, but it was stored for Remote Desktop access to a specific machine and was not being used (at least not by me) at the time of the warnings. The Security-Kerberos warning appears when the system was starting up (after a Windows Update reboot) and also appeared earlier this morning when nobody was logged into the machine. Clarification after SnOrfus answer: There was 1 set of invalid credentials that was stored for a terminal server. The rest of the credentials are known to be valid (used often & recently without issues). I logged on to the domain this morning without issue. I then ran windows update which rebooted the computer. After the restart, I couldn't log in (due to account being locked out). After unlocking & logging on to the domain, I checked Event Viewer which showed a problem with credentials after restarting. Since the only stored credentials (according to Credential Manager) are for terminal servers, why would there be a Credential problem on restart when remote desktop was not being used? Question Does anyone know if Windows 7 "randomly" checks the authentication of cached credentials?

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Windows 7: Setting up backup to an external hard drive on another computer on the network

    - by seansand
    I have an external hard drive connected to a Windows 7 (Home Edition) computer. I have another computer (with Windows 7 Ultimate), and I want to have the Windows 7 Ultimate back up to the same external hard drive, without having to disconnect and move the external hard drive from the Home Edition PC. When I get to the "Set up backup" dialog within Windows 7, it asks me where to save the backup. I select "Save on a network". However, when I enter "\\computername\harddrivename" under Browse, the "OK" button remains grayed out. The button remains grayed out unless I also enter a Username and Password under "Network credentials". However, the account I have on the other computer doesn't have a password for it. To un-gray out the button I must enter a fake password, allowing me to click "OK", but then obviously I get a "bad password" error. Does anyone know how to get around this problem? (Seems kind of ridiculous.) I made sure that the security settings with the external hard drive on the other computer are full access to Everyone, so permissions is not the problem. I also thought about using Homegroup instead of the regular security settings, but there is no obvious way to go about it that way, either.

    Read the article

  • Windows 7 fails to install

    - by Brian Ortiz
    I'm upgrading from Vista SP1 (which was actually upgraded from XP over a year ago) to Windows 7 RTM (64-bit Ultimate to 64-bit Ultimate). After 4 hours or so, the install fails with the message "This version of Windows could not be installed, Your previous version of Windows has been restored, and you can continue to use it." This error is back at my Vista desktop, there's no error that I could see during install, I just a message indicating that it was reverting everything. I tracked down the error logs and here's the log at I uploaded the error log (from C:\$WINDOWS.~BT\Sources\Panther) and uploaded onto Pastebin. Here is an excerpt: 2009-08-09 02:54:57, Error Number of Enumerated Devices = 21[gle=0x00000103] 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x[gle=0x80092004] 2009-08-09 02:54:58, Error Failed to find driver file path. Error=00000002x[gle=0x80092004] It was suggested that I upgrade to SP2 before upgrading to Vista, but this made no difference. I since uninstalled SP2 since it was creating some problems with a piece of hardware. I know a fresh install is best, but I'm hoping to avoid that because I'd need a new hard drive. Per Reuben's instruction, I found the install's dump and uploaded it here. (266 KB)

    Read the article

  • Keep Windows Installer from using largest drive for temporary files

    - by stefan.at.wpf
    By default Windows Installer uses the largest drive for temporary storage, no matter if that's needed (meaning there would also be enough space on the system drive). Taken from http://msdn.microsoft.com/en-us/library/aa371372%28VS.85%29.aspx: During an administrative installation the installer sets ROOTDRIVE to the first connected network drive it finds that can be written to. If it is not an administrative installation, or if the installer can find no network drives, the installer sets ROOTDRIVE to the local drive that can be written to having the most free space. Now my system drive is an SSD, my largest drive is a RAID, that spins down when it's not used. Remember the SSD as system drive? Everything is silent now! Until I install something and Windows Installer wakes up my RAID again just to put a small .tmp file on it... How can I prevent Windows Installer from using the largest drive as temporary storage? Can I maybe set some access rights to disallow the Windows Installer to write on my RAID drive? Any other ideas? Thank you!

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >