Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 480/751 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

• Problems with wired ethernet connection Ubuntu 11.10

  - by Andrew Fielden

  After some partition shuffling, I've got a problem on my 11.10 system. The wired ethernet interface fails to come up, although the wireless interface is working. I'm using NetworkManager. I thought this may be a problem with NetworkManager, so I checked the config files, which look ok. I then tried re-installing the package, but this didn't resolve the issues. I'm not sure at this point if the problem is due to software configuration, or a hardware problem. I've also tried the cable in other router ports, but same problem. The symptoms are:- System settings - Network reports that the cable is unplugged (it isn't) ifconfig reports the following eth0 Link encap:Ethernet HWaddr f0:4d:a2:a2:a7:fe UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:792 (792.0 B) TX bytes:0 (0.0 B) Interrupt:46 Base address:0xe000 My /etc/network/interfaces file has the following: auto lo iface lo inet loopback My /etc/resolv.conf file has the following: # Generated by NetworkManager The router's red light is on for this port dmesg reports ADDRCONF(NETDEV_UP): eth0: link is not ready

  Read the article

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• Battery not recognized on my laptop (and it recognizes my laptop as a desktop)

  - by AZorin

  I have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried to get the output of cat /proc/acpi/battery/BAT1/state but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root Nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find. Is there any way to change the configuration file(s) that detect the internal hardware of the computer. The /proc directory is a temporary RAM directory afaik. Is there a directory where that data is stored permanently and where the RAM reads if you know what I mean? Thanks in advance. AZorin This issue has been reported as bug #764513.

  Read the article

• Building a Redundant / Distributed Application

  - by MattW

  This is more of a "point me in the right direction" question. My team of three and I have built a hosted web app that queues and routes customer chat requests to available customer service agents (It does other things as well, but this is enough background to illustrate the issue). The basic dev architecture today is: a single page ajax web UI (ASP.NET MVC) with floating chat windows (think Gmail) a backend Windows service to queue and route the chat requests this service also logs the chats, calculates service levels, etc a Comet server product that routes data between the web frontend and the backend Windows service this also helps us detect which Agents are still connected (online) And our hardware architecture today is: 2 servers to host the web UI portion of the application a load balancer to route requests to the 2 different web app servers a third server to host the SQL Server DB and the backend Windows service responsible for queuing / delivering chats So as it stands today, one of the web app servers could go down and we would be ok. However, if something would happen to the SQL Server / Windows Service server we would be boned. My question - how can I make this backend Windows service logic be able to be spread across multiple machines (distributed)? The Windows service is written to accept requests from the Comet server, check for available Agents, and route the chat to those agents. How can I make this more distributed? How can I make it so that I can distribute the work of the backend Windows service can be spread across multiple machines for redundancy and uptime purposes? Will I need to re-write it with distributed computing in mind? I should also note that I am hosting all of this on Rackspace Cloud instances - so maybe it is something I should be less concerned about? Thanks in advance for any help!

  Read the article

• Oracle Java Embedded Client 1.1 Released

  - by Roger Brinkley

  Yesterday an update release of Oracle Java Embedded Client (OJEC) 1.1 quietly slipped out door for general availability. Until last year it was pretty difficult to get your hands on either a Connected Limited Device Configuration (CLDC) for small devices or a Connected Device Configuration (CDC) for medium devices java implementation without a substantial initial commitment. But with the the release of OJWC (CLDC) and OJEC (CDC) last year that has changed. OJEC 1.1 is a binary distribution designed for installation on medium configurations which is a mid range processor requiring a  slow startup time, seamless upgrades, in a cost sensitive hardware environment  anywhere from 3.5mb to 8 mb. There are headless as well as headed versions available. It is intended for devices, such as Blu-­-ray Disc players, set-­-top boxes, residential gateways,VOIP phones, and similar. From a software point of view, OJEC is the Java runtime platform implementation of Connected Device Configuration (CDC v1.1, JSR-­-218), Foundation Profile (FP v1.1, JSR-­-219), and Personal Basis Profile (PBP v1.1, JSR-­-217)  and includes optional packages RMI (JSR 66), JDBC (JSR 169) and XML API for Java ME (JSR 280), and Java TV (JSR-­-927). New to this release is support for the XML API (JSR 280) and a number of bug fixes and performance enhancements, including an improved Just-in-Time (JIT) compilation for the x86 chipset architecture. The platforms supported include ArmV5, ArmV6/ArmV7, MIPS 32 74K, and X86 in headless mode. For embedded developers there are number of advantages to using Java and if you have shied away from the JavaME edition in the past I would encourage you to look into the updated version of OJEC 1.1.

  Read the article

• Using EC2 instance as main development platform

  - by David

  My problem I am working as a consultant for various companies. Each company provides me with a laptop with their software on and I also have my own, where I have my development environment. I tend to buy a new laptop every second year and find myself spending lots of time configuring and installing software. I also spend a lot of time waiting for my laptop to process things. To solve all these issues, I am now considering using EC2 (running windows instances) as my main development platform and just access this from any PC I happen to be at. I calculated that running the Large instance (cheapest 64-bit) for 8 hours a day for a year costs me 960$ per year, which is acceptable. I imagine that when I approach the workplace each day, I will make a single tap on my phone to fire up the instance, so it is ready when I get to work. I should have different icons on my phone to fire up the various instance types. The same software should of course automatically be loaded on the various hardware (sometimes I would even need their instance with 68.4 GB of memory). Another advantage is that if I am having a specific problem with my instance, I could fire up another instance and have someone look into the problem and update the image. My question: Does anyone have experience with such a setup on EC2? What kind of problems do you foresee?

  Read the article

• Price Drop for Processor based License on Exalytics

  - by Mike.Hallett(at)Oracle-BI&EPM

  ·       33% reduction in the list `per processor` license pricing for the Oracle BI Foundation Suite ·       New capacity-based licensing which allows customers to think big & start small, significantly lowering the entry price point for an Exalytics. Oracle BI Software List Price changes In response to new powerful platforms like the in-memory Oracle Exalytics with 40 cpu cores (counted under Oracle pricing policy as 20 “processors”), the list price of “Oracle BI Foundation Suite” (BIFS) is reduced by 33% from $450K per processor to $300K per processor. Capacity-based licensing on Exalytics (Trusted Partitions) “Capacity-based pricing” for the BIFS, Endeca, Essbase and Times Ten for Exalytics software is now available for Exalytics systems. This is delivered using “Oracle VM” (OVM).  We still ship a full Exalytics machine to all customers, but they may choose to only use and license a subset of the processors installed in the machine.   Customers can license Exalytics software in units of 5 “processors”: 5, 10, 15 or the full capacity 20.   As the customer’s implementation and workload increases, it is a simple matter to license additional processors and, using OVM, make them available to the BI or EPM application. Endeca Information Discovery now available on Exalytics Oracle has also announced the certification of “Oracle Endeca Information Discovery” (EID) on the Exalytics machine.    EID can be licensed alone or in combination with the BIFS & Times Ten for an Exalytics stack, and also participates in the capacity based pricing outlined above.   The Exalytics hardware is the perfect platform for EID, and provides superb power and performance for this in-memory hybrid text-search-analytics.   For more information : Oracle Price lists Oracle Partitioning Policy Discussion by Mark Rittman (Rittman Mead Consulting ltd.) on Oracle Trusted Partitions for Oracle Engineered Systems, Oracle Exalytics and Updated BI Foundation Pricing.

  Read the article

• Best practices: Ajax and server side scripting with stored procedures

  - by Luka Milani

  I need to rebuild an old huge website and probably to port everyting to ASP.NET and jQuery and I would like to ask for some suggestion and tips. Actually the website uses: Ajax (client site with prototype.js) ASP (vb script server side) SQL Server 2005 IIS 7 as web server This website uses hundred of stored procedures and the requests are made by an ajax call and only 1 ASP page that contain an huge select case Shortly an example: JAVASCRIPT + PROTOTYPE: var data = { action: 'NEWS', callback: 'doNews', param1: $('text_example').value, ......: ..........}; AjaxGet(data); // perform a call using another function + prototype SERVER SIDE ASP: <% ...... select case request("Action") case "NEWS" With cmmDB .ActiveConnection = Conn .CommandText = "sp_NEWS_TO_CALL_for_example" .CommandType = adCmdStoredProc Set par0DB = .CreateParameter("Param1", adVarchar, adParamInput,6) Set par1DB = .CreateParameter(".....", adInteger, adParamInput) ' ........ ' can be more parameters .Parameters.Append par0DB .Parameters.Append par1DB par0DB.Value = request("Param1") par1DB.Value = request(".....") set rs=cmmDB.execute RecodsetToJSON rs, jsa ' create JSON response using a sub End With .... %> So as you can see I have an ASP page that has a lot of CASE and this page answers to all the ajax request in the site. My question are: Instead of having many CASES is it possible to create dynamic vb code that parses the ajax request and creates dynamically the call to the desired SP (also implementing the parameters passed by JS)? What is the best approach to handle situations like this, by using the advantages of .Net + protoype or jQuery? How the big sites handle situation like this? Do they do it by creating 1 page for request? Thanks in advance for suggestion, direction and tips.

  Read the article

• Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

  - by Kurtosis

  I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

  Read the article

• How can I make an unmounted / unmountable NTFS disk not show up in the nautilus devices area?

  - by Dennis

  I have an idea that my /etc/fstab is a real mish-mash and I don't remember how it got that way, first of all it looks like this UUID=9EB80807B807DD21 /media/Storage ntfs-3g users 0 0 UUID=a60397fd-964a-45b1-ad35-53c8a4bee010 / ext4 defaults 0 1 UUID=1764825d-b8ba-4620-b3b0-e979b6f4f5c4 swap swap sw 0 0 UUID=255DA1E406E29DBC /media/sda2 ntfs-3g defaults 0 0 UUID=2CCCF161CCF1262C /mnt/sda1 ntfs-3g umask=000 0 0 /dev/fd0 /media/floppy0 vfat noauto 0 0 I started with an old XP install on disk /dev/sda that I don't use anymore but didn't want to delete, so I shrunk the XP partition, added a NTFS partition that would be common to both systems (Labeled it "Common" in XP), then installed Lucid on an extended ext4 partition. On this disk of course the ext4 system partition comes up as /, the go between partition auto-mounts on /media/sda1 but shows up in Nautilus as COMMOM, while the XP system disk does not show up in Nautilus, but I can get to it by navigating to /mnt/sda1. A second hard drive (/dev/sdb) that I stuck in was already formatted NTFS with a bunch of stuff and labeled "Storage". It auto-mounts to /media/Storage but another un-mounted disk also shows up in the Nautilus device area called Storage but it can't be mounted (Here and in the "Places" are the only times it appears) I would primarily like this non-existant (or already mounted depending on how you look at it) disk to not show up, but I wouldn't mind an explanation of why one labeled partition auto-mounts to a /media mount point but shows up by label, one does not show up as mounted at all but mounts to a /mnt mount point and is there for navigation, and one is mounted to a directory of the same name as the label. I would love to have some consistancy / direction on what is proper in this circumstance. No doubt I caused this with the fstab but I really don't remember what my rational was if I edited it manually

  Read the article

• Compiling GCC or Clang for thumb drive on OSX

  - by user105524

  I have a mac book that I don't have admin rights to which I would like to be able to use either GCC or clang. Since I lack admin right I can't install binutils or a compiler to /usr directory. My plan is to install both of these (using an old macbook that I do have admin rights for) to a flash drive and then run the compiler off of there. How would one go building gcc or clang so that it could run just off of a thumb drive? I've tried both but haven't had any success. I've tried doing it defining as many of the directories as possible through configure, but haven't been able to successfully build. My current configure script for gcc-4.8.1 is (where USB20D is the thumb drive): ../gcc-4.8.1/configure --prefix=/Volumes/USB20FD/usr \ --with-local-prefix=/Volumes/USB20FD/usr/local \ --with-native-system-header-dir=/Volumes/USB20FD/usr/include \ --with-as=/Volumes/USB20FD/usr/bin/as \ --enable-languages=c,c++,fortran\ --with-ld=/Volumes/USB20FD/usr/bin/ld \ --with-build-time-tools=/Volumes/USB20FD/usr/bin \ AR=/Volumes/USB20FD/usr/bin/ar \ AS=/Volumes/USB20FD/usr/bin/as \ RANLIB=/Volumes/USB20FD/usr/bin/ranlib \ LD=/Volumes/USB20FD/usr/bin/ld \ NM=/Volumes/USB20FD/usr/bin/nm \ LIPO=/Volumes/USB20FD/usr/bin/lipo \ AR_FOR_TARGET=/Volumes/USB20FD/usr/bin/ar \ AS_FOR_TARGET=/Volumes/USB20FD/usr/bin/as \ RANLIB_FOR_TARGET=/Volumes/USB20FD/usr/bin/ranlib \ LD_FOR_TARGET=/Volumes/USB20FD/usr/bin/ld \ NM_FOR_TARGET=/Volumes/USB20FD/usr/bin/nm \ LIPO_FOR_TARGET=/Volumes/USB20FD/usr/bin/lipo CFLAGS=" -nodefaultlibs -nostdlib -B/Volumes/USB20FD/bin -isystem/Volumes/USB20FD/usr/include -static-libgcc -v -L/Volumes/USB20FD/usr/lib " \ LDFLAGS=" -Z -lc -nodefaultlibs -nostdlib -L/Volumes/USB20FD/usr/lib -lgcc -syslibroot /Volumes/USB20FD/usr/lib/crt1.10.6.o " Any obvious ideas of which of these options need to be turned on to install the appropriate files on the thumb drive during installation? What other magic occurs during xcode installation which isn't occurring here? Thanks for any suggestions

  Read the article

• Blender - creating bones from transform matrices

  - by user975135

  Notice: this is for the Blender 2.5/2.6 API. Back in the old days in the Blender 2.4 API, you could easily create a bone from a transform matrix in your 3d file as EditBones had an attribute named "matrix", which was an armature-space matrix you could access and modify. The new 2.5+ API still has the "matrix" attribute for EditBones, but for some unknown reason it is now read-only. So how to create EditBones from transform matrices? I could only find one thing: a new "transform()" function, which takes a Matrix too. Transform the the bones head, tail, roll and envelope (when the matrix has a scale component). Perfect, but you already need to have some values (loc/rot/scale) for your bone, otherwise transforming with a matrix like this will give you nothing, your bone will be a zero-sized bone which will be deleted by Blender. if you create default bone values first, like this: bone.tail = mathutils.Vector([0,1,0]) Then transform() will work on your bone and it might seem to create correct bones, but setting a tail position actually generates a matrix itself, use transform() and you don't get the matrix from your model file on your EditBone, but the multiplication of your matrix with the bone's existing one. This can be easily proven by comparing the matrices read from the file with EditBone.matrix. Again it might seem correct in Blender, but now export your model and you see your animations are messed up, as the bind pose rotations of the bones are wrong. I've tried to find an alternative way to assign the transformation matrix from my file to my EditBone with no luck.

  Read the article

• Input/output error, when trying to install on netbook [closed]

  - by Ben

  Been trying to install ubuntu on my Samsung NB30 netbook, but I have been running into the same error over and over again. [Errno 5] Input/output error This particular error is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. I'm installing from the USB bootable version, I get the exact same error at the exact same point when trying to install both ubuntu desktop and ubuntu desktop remix. I've tried redownloading both ISOs twice and I've tried two different USB sticks (one being completely new). I've tried installing from with in an ubuntu live session and I get the exact same problem. I've ran a bootable memtest and everything passes with no errors, I've also ran a dmesg in terminal after the installer fails here's what it reported - http://bit.ly/exAQRR Thanks in advance! EDIT: I know this was ages ago, but to anyone out there with the same issue, the problem turned out to be the downloaded image, my internet is poor at the best of times and the ISO failed the MD5sum check, if this happens to you I recommend you download the ISO image by torrent, it'll check the integrity of the file is maintained.

  Read the article

• Brain picking during job interview

  - by mark

  Recently, I had a job interview at a big Silicon Valley company for a senior software developer/R&D position. I had several technical phone screens, an all day on-site interview and more technical phone screens for another position later. The interviews went really well, I have a PhD and working experience in the area I was applying for yet no offer was made. So far, so good. It was an interesting experience, I am employed, absolutely no hard feelings about this. Some of the interviewers asked really detailed questions to the point of being suspicious about new technologies I have been working on. These technologies are still in development and have not come to market yet. I know some major hardware/software companies are working on this too. I have had many interviews before and based on my former interviewing experience and the impression some of the interviewers left behind, I know now all this company wanted from me is to extract some ideas about what I did in this field. Remember, I am referring to a R&D position, not the standard software developer stuff. Has anybody encountered this situation so far? And how did you deal with it? I am not so much concerned about "stealing" ideas but more about being tricked into showing up for an interview when there is no intension to hire anyway. I am considering refusing technical interviews in the future and instead proposing a trial period in which the company can easily reconsider its hiring decision.

  Read the article

• About online game servers and how to handle data

  - by TreantBG

  So my question isn't about what technology to use or how to do this or that, but a more general question. I'm currently developing a action third person shooter. With elements of RPG - weapon,armor upgrades and items. Players will be able to create new games or join old ones. So my question is how to create the game server that players will play in. I have two ideas on my mind. The player who made the game is the server. All data passes trough him and he send this data to the server updating the database of the players with their XP points kills/deaths score and other. Or my host machine is the server, the player who made the game just will open new instance on my host and will be like client. And all players send their input data to the host, the host updates the game and send response back to client for any new changes like where is the enemy and other. And if i choose option 1 is there a chance the host to change the game content and manipulate the game results? (I think there is but i'm not sure) And if i choose option 2 isn't that raising the response time and potentially the game lag? or maybe there is another option?

  Read the article

• USB device not accepting address

  - by Mike Williamson

  I have a series of machines that I am building for work that have usb card readers. When I boot them I get a long series of messages: ... [ 2347.768419] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2347.968178] usb 1-6.6: new full-speed USB device number 10 using ehci_hcd [ 2352.552020] usb 1-6.6: device not accepting address 10, error -32 [ 2352.568421] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2352.768179] usb 1-6.6: new full-speed USB device number 12 using ehci_hcd [ 2357.352033] usb 1-6.6: device not accepting address 12, error -32 ... On some older machines this only takes a few attempts before the card reader finally accepts an address, while on newer machines it can take many minutes. Changing hardware is not an option and plugging the usb card reader into a different port is only an option for the older manchines. This was a problem under 11.04 and I am now running the 12.04 beta and its still happening. Is there something I can do in the software (a udev rule perhaps?) that would fix this? Any advice appreciated. I'm happy to provide more details if you need them.

  Read the article

• Static IP Address on Ubuntu 12.04 Virtual Machine

  - by chrisnankervis

  I've setup a VM running Ubuntu 12.04 specifically for local web development and am having some problems ensuring it has a static IP address. A static IP address is important as I'm using the IP address in my hosts file to assign a .local suffix to addresses used both in browser and to connect to the correct database on the VM. Currently, every time I connect to a new network or my VM is assigned a new IP address I need to reconfigure my whole environment which is becoming quite a pain. It also probably doesn't help that the default-lease-time on the Ubuntu VM is set to 1800 by default. At the moment I'm using VMWare Fusion and the Network Adapter is enabled and set to "Autodetect" under Bridged Networking. I've tried to set a static IP address within the dhcpd.conf using the code below: host ubuntu { hardware ethernet 00:50:56:35:0f:f1; fixed-address: 192.168.100.100; } The fixed-address that I've used is also outside the range specified in the subnet block (which in this case is 192.168.100.128 to 192.168.100.254). I've tried adding and removing the network adapter and restarting my Mac after each time to no avail. Below is an ifconfig of the VM that might be of some help: eth0 Link encap:Ethernet HWaddr 00:50:56:35:0f:f1 inet addr:192.168.0.25 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe35:ff1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1624 errors:0 dropped:0 overruns:0 frame:0 TX packets:416 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:147348 (147.3 KB) TX bytes:41756 (41.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Are there any specific issues with 12.04 that I'm missing? Otherwise has anyone else got any ideas? Thanks in advance.

  Read the article

• How do you get past the Analysis to Paralysis when working on a new project?

  - by Cape Cod Gunny

  I've been struggling with how to get my project going. I've got an old software package that is in need of desparate rewrite. I haven't compiled the source code since 2004. It still sells, it's stable but does require the “Run this program in compatibility mode for:” on a lot of the newer windows systems. It's also one of those hard coded 640 X 480 screen resolution programs. Yuck! I can't seem to get started with this rewrite. I'm constantly fiddling around with different things. I'll play around with different fluid layouts for a while. Then I start looking around at how the main menu should work/look. I quickly find out that there's this thing called "Cool Bars" and I'll spend hours playing with that. Then I start thinking about stuff like "Oh I need to make sure that the screen sizes are preserved so when the application gets relaunched it remebers how the screens were positioned." Which leads to what happens if they have two monitors? Which leads to what happens if they have a quad screen? Yikes it's got to stop. I have always been a slow starter. I think about stuff long and hard up front. This has always plagued me. Once I get my mind made up then bam... I'm off and running. I'm looking for advice from some other one-person software companies that can help someone like me get off to a quicker start?

  Read the article

• Failed to load session gnome-fallback, after messing with metacity

  - by Carlito

  I am using Ubuntu 12.04 with gnome-session-fallback (Gnome Classic in the login menu). I wanted to remove window borders from metacity and stumbled across this post which basically changes window->mwm_decorated from TRUE to FALSE, which should remove the window borders in metacity. I know that it is also possible to change your GTK theme to one without window borders, but I wanted to try this solution. So I downloaded the source from my current metacity version (2.34.1) and changed that row. After compiling (./configure && make) I ran checkinstall which generates a .deb file from the source (had to change the version a bit to match the current one exactly). But after installing and loging out and back in, I couldn't load Gnome Classic. I get the error Failed to load session gnome-fallback. I could reinstall the old metacity which was still saved in /var/cache/apt/archives/, so everything is back where it was before. But I would like to mess around with metacity. Have I installed it correctly or did I forgot something? Are there any log files that I should check for solving this error? Thanks in advance!

  Read the article

• Which programming language should i choose? (much more info inside) [closed]

  - by Andreas

  I am not completely sure if this is the right place to put this question, but since it's the programming thread I guessed that there's many experienced programmers here. :) Ok, hello! My name is Andreas and I am a 16 years old guy from Norway. For some time now I've wanted to learn a programming language. Six months ago I started learning C++, but quit withing a week due to lack of motivation. The same thing happend only 2 months ago when I tried to learn Lua. I wanted to program mods to the game Garry's mod, and was really motivated. Then I stopped playing the game, and the programming stopped with it. Today though I am ready again. The only difference is that I am not completely sure what I want to do with the language. I only want to create something, and I miss the progress of failing and enduring hard work until I finally solve the problem I've worked on for hours. What I am trying to say is; Is there any program out there that allows me, a complete noob (I didn't learn that much in a week, so I like to call myself a beginner), to create apps, mods or something similar but at the same time being qualified as a first time language? I was thinking of Java, because Android, Minecraft and many other applications and games use it. But I've heard that it is going to be replaced by a program called HTML 5 (whatever that is), is this true? I certainly don't want to spend many hours of my life on something that is useless in a year or two. Hopefully I didn't make this too complicated. I know that it is hard to recommend something when I don't have a goal, but I really don't know what to say. Have a good day kind folks! - Andreas EDIT:* I did not know that this was an off topic question, really sorry!

  Read the article

• MatheMagics - Guess My Age - Method 2

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved MatheMagic – Guess My Age – Method 2 The Mathemagician stands on the stage and asks an adult to do the following: ·         Do the next few steps on your calculator, or the calculator in your phone, or even on a piece of paper. ·         Do it silently! Don’t tell me the results until I ask for them directly ·         Multiply your age by 2. ·         Add 7 to the result ·         Multiply the result by 5. ·         Tell me the result. I will nonetheless immediately tell you what your age is. How do I do this? Let’s do the algebra. Let A denote your age (2A + 7) 5 = 10A + 35 so it is of the 3 digit form XY5 Now make two numbers out of the result - The last digit and the number before it. The Last digit is obviously 5, the other 2 (or 3 for a centenarian) and this number is the age + 3. Example: I am 76 years old and here is what happens when I do the steps 76 x 2 = 152 152 + 7 = 159 159 x 5 = 795 This is made of 79 and 5. And … 79 – 3 = 76 A note to the socially aware mathemagician – it is safer to do it with a man. The chances of a veracious answer are much, much higher! The trick may be accomplished on any 2 or 3 digit number, not just one’s age, but if you want to know your date’s age, it’s a good way to elicit it. That’s All Folks PS for more Ageless “Age” mathemagics go to www.mgsltns.com/games.htm and also here: http://geekswithblogs.net/PointsToShare/archive/2011/11/15/mathemagics---guess-my-age-method-1.aspx

  Read the article

• How to view/mount other partitions on your hard drive

  - by Preston Zacharias

  Recently I have installed Ubuntu 12.04 Beta 2 on a USB flash drive and decided to install it on an old external HDD which I have taken out of the casing and succesfully mounted in my desktop computer. There is no other operating system besides the newly install Ubuntu. However, there is about 500gb of data on the drive. This is why i used a partitioning software on my windows 7 netbook to partition the hard drive to set aside 1tb for files, 350gb of space for linux and the remaining 650gb for Vista which i plan on installing soon. But this is where the problem sets in...when installing Ubuntu it does not recognize that the drive is partitioned at all, it's just one big open block of space...so I used the installers built in partitioning feature to set aside 300gb for main Ubuntu install and 50gb for swap space. I set both of these partitions to be created at the "end" so that it wouldn't delete or write over my data. And this is where i am really lost; when booting into Ubuntu i am able to use it perfectly fine, got on internet, etc...but i have NO CLUE as to how i can view files that were previously on the drive (all of my data that i had prior to install). How can I mount/be able to view the other partition so that i can have access to my data? Thank you ahead of time! I REALLY appreciate any help or advice! ~Preston

  Read the article

• My Windows 8 App in Windows Store

  - by Stephen.Walther

  Finally, you have a good reason to upgrade to Windows 8! My Brain Eaters app was just accepted into the Windows Store. Just in time for Halloween! The Brain Eaters app is a sample app from my soon to be released book Windows 8 Apps with HTML5 and JavaScript. The game illustrates several important programming concepts which you need when building Windows 8 games with JavaScript such as using HTML5 Canvas and the new requestAnimationFrame() method. If you are looking for Halo or Call of Duty then you will be disappointed. If you are looking for PAC-MAN then you will be disappointed. I created the simplest arcade game that I could imagine so I could explain it in the book. All of the code for the game is included with the book. The goal of the game is to eat the food pellets while avoiding the zombies while running around a maze. Every time you get eaten by a zombie, you can hear my six year old son saying “Oh No!”. Here’s the link to the game: http://apps.microsoft.com/webpdp/app/brain-eaters/e283c8d0-1fed-4b26-a8bf-464584c9de6d

  Read the article

• Directory error when trying to create a new user

  - by Tom Brossman

  I added a second user 'shirley' in Settings - User Accounts, and set a password. The account type is Standard. In 11.04, this worked and I logged in and had a functioning desktop for this user. How is this done in 11.10? When I try to log in as this user I have this error: Nautilus could not create the required folder "/home/shirley/.config/nautilus". Before running Nautilus, please create the following folder, or set permissions such that Nautilus can create it. The only option then is to click OK, this dumps me out to full-screen Nautilus, like this: There is no launcher or visible way to start any programs. Print screen doesn't take a screengrab. The desktop is similar to this question but I get no terminal when I press CTRL+ALT+T. I have to press CTRL+ALT+F2 and restart from the terminal to get out of this. This answer is to install gnome-system-tools. Shouldn't I be able to add a second user with the default install? EDIT: I tried the deluser+adduser suggestion, there was no change after trying it. Here is what I got: tom@desktop:~$ sudo deluser shirley [sudo] password for tom: Removing user `shirley' ... Warning: group `shirley' has no more members. Done tom@desktop:~$ sudo adduser shirley Adding user `shirley' ... Adding new group `shirley' (1001) Adding new user shirley' (1001) with groupshirley' The home directory '/home/shirley' already exists. Not copying from `/etc/skel'. Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully Changing user information for shirley Enter the new value, or press ENTER for the default Full Name []: Room Number []: Work Phone []: Home Phone []: Other []: Is the information correct? [Y/n] y What has gone so wrong with simply adding a second user? Am I the only one having this problem? I'd reinstall if that fixed things, but this is a fresh install only a few days old.

  Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >