Search Results

Search found 14275 results on 571 pages for 'exam questions'.

Page 481/571 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

• Why can't decimal numbers be represented exactly in binary?

  - by Barry Brown

  There have been several questions posted to SO about floating-point representation. For example, the decimal number 0.1 doesn't have an exact binary representation, so it's dangerous to use the == operator to compare it to another floating-point number. I understand the principles behind floating-point representation. What I don't understand is why, from a mathematical perspective, are the numbers to the right of the decimal point any more "special" that the ones to the left? For example, the number 61.0 has an exact binary representation because the integral portion of any number is always exact. But the number 6.10 is not exact. All I did was move the decimal one place and suddenly I've gone from Exactopia to Inexactville. Mathematically, there should be no intrinsic difference between the two numbers -- they're just numbers. By contrast, if I move the decimal one place in the other direction to produce the number 610, I'm still in Exactopia. I can keep going in that direction (6100, 610000000, 610000000000000) and they're still exact, exact, exact. But as soon as the decimal crosses some threshold, the numbers are no longer exact. What's going on? Edit: to clarify, I want to stay away from discussion about industry-standard representations, such as IEEE, and stick with what I believe is the mathematically "pure" way. In base 10, the positional values are: ... 1000 100 10 1 1/10 1/100 ... In binary, they would be: ... 8 4 2 1 1/2 1/4 1/8 ... There are also no arbitrary limits placed on these numbers. The positions increase indefinitely to the left and to the right.

  Read the article

• Something about Stream

  - by sforester

  I've been working on something that make use of streams and I found myself not clear about some stream concepts( you can also view another question posted by me at http://stackoverflow.com/questions/2933923/about-redirected-stdout-in-system-diagnostics-process ). 1.how do you indicate that you have finished writing a stream, writing something like a EOF? 2.follow the previous question, if I have written a EOF(or something like that) to a stream but didn't close the stream, then I want to write something else to the same stream, can I just start writing to it and no more set up required? 3.if a procedure tries to read a stream(like the stdin ) that no one has written anything to it, the reading procedure will be blocked,finally some data arrives and the procedure will just read till the writing is done,which is indicated by getting a return of 0 count of bytes read rather than being blocked, and now if the procedure issues another read to the same stream, it will still get a 0 count and return immediately while I was expecting it will be blocked since no one is writing to the stream now. So does the stream holds different states when the stream is opened but no one has written to it yet and when someone has finished a writing session? I'm using Windows the .net framework if there will by any thing platform specific. Thanks a lot!

  Read the article

• How to best launch C++ application from web page

  - by JB

  I guess there are two parts to this question, one technical and one best practice for security and doing things "right". I'm working on a little game using C++ / directx but I would like to be able to launch it from a web page by someone clicking on a link on that page. Ideally I would like the first time they clicked for it to launch an installer downloads and installs the game on their machine, and then the next time to launch an application which updates the game from a web site if it's old and then launches it. I have no problems with the expected security popups and questions the first time it runs. I want people to be certain what they are installing and understand what they are doing. But it would be nice if once it is installed they could run it with the minimum of fuss. My question then is what technologies I could use to do this? I'm thinking that it would need a browser plugin and an activex control so that first time you'd install that, and subsequently the control/plugin would be able to launch the game. I'm not sure that under newer browser secuity models that a plugin would have the permissions to be able to run an installer though or silently invoke applications on the client machine even if they are already installed. Is there a more sensible way to achive what I want to achieve? And I'm worried about the security aspects too. I want this to be convenient for users but I of course want to do it "right". I know this can be done as I've seen several mmorpg type games that launch in this way from the browser now but it's not entirely clear to me how they've done it.

  Read the article

• What are some methods to prevent double posting in a form? (PHP)

  - by jpjp

  I want to prevent users from accidentally posting a comment twice. I use the PRG (post redirect get) method, so that I insert the data on another page then redirect the user back to the page which shows the comment. This allows users to refresh as many times as they want. However this doesn't work when the user goes back and clicks submit again or when they click submit 100 times really fast. I don't want 100 of the same comments. I looked at related questions on SO and found that a token is best. But I am having trouble using it. //makerandomtoken(20) returns a random 20 length char. <form method="post" ... > <input type="text" id="comments" name="comments" class="commentbox" /><br/> <input type="hidden" name="_token" value="<?php echo $token=makerandomtoken(20); ?>" /> <input type="submit" value="submit" name="submit" /> </form> if (isset($_POST['submit']) && !empty($comments)) { $comments= mysqli_real_escape_string($dbc,trim($_POST['comments'])); //how do I make the if-statment to check if the token has been already set once? if ( ____________){ //don't insert comment because already clicked submit } else{ //insert the comment into the database } } So I have the token as a hidden value, but how do I use that to prevent multiple clicking of submit. METHODS: someone suggested using sessions. I would set the random token to $_SESSION['_token'] and check if that session token is equal to the $_POST['_token'], but how do I do that? When I tried, it still doesn't check

  Read the article

• ajax login problem

  - by rdanee

  $(document).ready(function() { $("form#login_form").submit(function() { var login_username = $('#login_username').attr('value'); var login_password = $('#login_password').attr('value'); type: "POST", $.ajax({ url: "login.php", data: "username="+ login_username +"& password="+ login_password, success: function(data){ alert(data); if (data == "ok"){ $('form#login_form').hide(function(){$('div.success').fadeIn();}); } } }); return false; }); Login.php: <?php include("settings.php"); $query = "select * from users where username = '{$_POST['login_username']}' and password = md5('{$_POST['login_password']}')"; $query = mysql_query($query, $connection); if ( mysql_num_rows($query) == 1 ) { print "ok"; $array = mysql_fetch_array($query); if ( $_POST['stay'] ) { $time = time()+2592000; } else { $time = 0; } } else { print "no"; } mysql_close($connection); ?> My problem: In the alert the message always "no" whether username/password is correct, however on the site "ok" appears when username/pw is correct. I have read the other questions in connection with this problem, but I couldn't solve the response problem from login.php with Json. Could you help me how should I response to the ajax calling? ( with a code if it is possible) Thank you very much, and sorry for questioning again.

  Read the article

• Distinct Value Array for View Controller Index Using Core Data

  - by b.dot

  Hi, I'm trying to create an index representing the first letter value of each record in a Core Data store to be used in a table view controller. I'm using a snippet of the code from Apple's documentation. I would simply like to produce an array or dictionary of distinct values as the result. My store already has the character defined within each record object. Questions: 1) I'm having a problem understanding NSDictionaryResultType. Where does the resulting dictionary object get received so that I can assign it's keys to the view controller? The code seems to only return an array. 2) If I include the line containing NSDictionaryResultType, I get no returns. 3) I realize that I could do this in a loop, but I'm hoping this will work. Thanks! NSEntityDescription *entity = [NSEntityDescription entityForName:@"People" inManagedObjectContext:managedObjectContext]; NSFetchRequest *request = [[NSFetchRequest alloc] init]; [request setEntity:entity]; [request setResultType:NSDictionaryResultType]; // This line causes no no results. [request setReturnsDistinctResults:YES]; [request setPropertiesToFetch :[NSArray arrayWithObject:@"alphabetIndex"]]; NSError *error; NSArray *objects = [managedObjectContext executeFetchRequest:request error:&error];

  Read the article

• A potentially dangerous Request.Form value was detected: Dealing with these errors proactively, or a

  - by Albert

  I'm noticing this error more and more in my error logs. I've read through the questions here talking about this error, but they don't address what I would like to do (see below). I'm considering three options, in the order of preference: 1) When submitting a form (I use formviews almost exclusively, if that helps), if potentially dangerous characters are detected, automatically strip them out and submit. 2) When submitting a form, if potentially dangerous characters are detected, alert the user and let them fix it before trying again. 3) After the exception is generated, deal with it and alert the user. I'm hoping one of the first two options might be able to do somewhat globally...I know for the 3rd I'd have to alter a TON of Try-Catch blocks I already have in place. Doable, but labor intensive. I'd rather be proactive about it if at all possible and avoid the exception all together. Perhaps one approach to #1 would be to write a block of code that could loop through all text entry fields in a formview, during the insert/update event, and strip the characters out. I'm ok with that, but I'd rather not have to heavily alter all my Insert/Update events to accomplish this. Or maybe I just create a different class to do the text checking/deleting, and only insert 1 line of code in each Insert/Update event. If anyone can come up with some example code of any of these approaches that would be a help. Thanks for any ideas or information. I'm definitely open to other solutions too; these are only the 3 that came to mind. I can say that I don't want to turn request validation off though.

  Read the article

• How do I create Variables in XSLT that are not document fragments?

  - by chiborg

  Consider the following XSLT template <xsl:template match="/"> <xsl:variable name="var1"> <elem>1</elem> <elem>2</elem> <elem>3</elem> </xsl:variable> <xsl:text>var1 has </xsl:text> <xsl:value-of select="count($var1)"/> <xsl:text>elements. </xsl:text> <xsl:variable name="var2" select="$var1/elem[. != '2']"/> <xsl:text>var2 has </xsl:text> <xsl:value-of select="count($var2)"/> <xsl:text>elements. </xsl:text> </xsl:template> The output of this template is var1 has 1 elements var2 has 2 elements The first line outputs 1 (and not, as I first expected 3) because var1 is a document fragment that contains the <elem> elements as childen. Now for my questions: How can I create a variable that does not contain a document fragment? I could do it like I did with var2, only leaving out the predicate. But maybe there is a way without using a second variable. Or, as an alternative: How can I preserve the document fragment in a variable while filtering out some elements?

  Read the article

• Two part question about submitting bluetooth-enabled apps for the iPhone

  - by Kyle

  I have a couple questions about submitting blue-tooth enabled apps on the iPhone. I want to first say that bluetooth is merely an option in the application. The application does not completely rely on bluetooth as there are many modes the user can go in. First, do they require you to have the "peer-peer" key set in UIRequiredDeviceCapabilities even if bluetooth interface options can be disabled or hidden for non-bluetooth enabled devices? Basically, it's just an OPTION in the game and there are many other modes the player can play.. Does Apple not allow you to do that? I'm just curious, because it seems like something they would do. Adding to that, how do you check for it's functionality at runtime? In essence, how do you check UIRequiredDeviceCapabilities at runtime. I'm aware of checking iPhone device types, so would that be a proper way of going about it? I'm also sort of unaware which devices can run bluetooth gamekit, there doesn't seem to be a proper reference at the SDK site, or I'm unable to find it. Thanks for reading! [edit] I can confirm the existance of somebody rejected for submitting a bluetooth enabled app which didn't work on a iPhone 2G.. Of course, they didn't say if that was the MAIN function of the app, though.

  Read the article

• Interchange structured data between Haskell and C

  - by Eonil

  First, I'm a Haskell beginner. I'm planning integrating Haskell into C for realtime game. Haskell does logic, C does rendering. To do this, I have to pass huge complexly structured data (game state) from/to each other for each tick (at least 30 times per second). So the passing data should be lightweight. This state data may laid on sequential space on memory. Both of Haskell and C parts should access every area of the states freely. In best case, the cost of passing data can be copying a pointer to a memory. In worst case, copying whole data with conversion. I'm reading Haskell's FFI(http://www.haskell.org/haskellwiki/FFICookBook#Working_with_structs) The Haskell code look specifying memory layout explicitly. I have a few questions. Can Haskell specify memory layout explicitly? (to be matched exactly with C struct) Is this real memory layout? Or any kind of conversion required? (performance penalty) If Q#2 is true, Any performance penalty when the memory layout specified explicitly? What's the syntax #{alignment foo}? Where can I find the document about this? If I want to pass huge data with best performance, how should I do that? *PS Explicit memory layout feature which I said is just C#'s [StructLayout] attribute. Which is specifying in-memory position and size explicitly. http://www.developerfusion.com/article/84519/mastering-structs-in-c/ I'm not sure Haskell has matching linguistic construct matching with fields of C struct.

  Read the article

• How to Load external Div that has a dynamic content using ajax and jsp/servlets ?

  - by A.S al-shammari

  I need to use ajax feature to load external div element ( external jsp file) into the current page. That JSP page contains a dynamic content - e.g. content that is based on values received from the current session. I solved this problem , but I'm in doubt because I think that my solution is bad , or maybe there is better solution since I'm not expert. I have three files: Javascript function that is triggered when a element is clicked, it requests html data from a servlet: $("#inboxtable tbody tr").click(function(){ var trID = $(this).attr('id'); $.post("event?view=read",{id:trID}, function(data){ $("#eventContent").html(data); // load external file },"html"); // type }); The servlet "event" loads the data and generates HTML content using include method : String id = request.getParameter("id"); if (id != null) { v.add("Test"); v.add(id); session.setAttribute("readMessageVector", v); request.getRequestDispatcher("readMessage.jsp").include(request, response); } The readMessage jsp file looks like this: <p> Text: ${readMessageVector[0]} </p> <p> ID: ${readMessageVector[1]} </p> My questions Is this solution good enough to solve this problem - loading external jsp that has dynamic content ? Is there better solution ?

  Read the article

• Read IFrame content using JavaScript

  - by Rajat

  Ok, This is my first time dealing seriously with IFrames and I cant seem to understand a few things: First the sample code I am testing with: <head> <script type="text/javascript"> function init(){ console.log("IFrame content: " + window.frames['i1'].document.getElementsByTagName('body')[0].innerHTML); } </script> </head> <body onload="init();"> <iframe name="i1" src="foo.txt"/> </body> the file "foo.txt" looks like this: sample text file Questions: 1) The iframe seems to be behaving as a HTML document and the file text is actually part of the body instead. Why ? Is it a rule for an IFrame to be a HTML document. Is it not possible for the content of an iframe to be just plain text ?? 2) The file content gets wrapped inside a pre tag for some reason. Why is this so ? Is it always the case? 3) My access method in the javascript is working but is there any other alternative? [native js solutions please] If the content is wrapped in a pre tag always then I will actually have to lookup inside the pre tag rather than lookup the innerHTML

  Read the article

• Including/Organzing HTML in large javascript project

  - by Bill Zimmerman

  Hi, I've a got a fairly large web app, with several mini applets on each page. These applets are almost always identical jquery apps. I am looking for advice on how I should organize/include smaller parts of these jquery apps within my larger project. For example, each app has several independent tabs. If possible, I would like to store each of the tabs as a seperate .html file because this makes development easier. My requirements are: 1) All of the html 'tabs' are loaded on the clients end when the page loads. I would like to avoid any delays by dynamically requesting the tab html. 2) If possible, I would like to minimize the raw data sent. For example, it would be preferable to send each tab 1 time, instead of sending each tab 10 times if there are ten applets on that page. Questions: 1) What are my options for 'including' the HTML files / javascript code 2) Any tips for keeping my development simple in this situation? Surely there has to be a better way than just editing one massive html file when working with large pages.

  Read the article

• how i can retrive files from folder on hard-disk and how to display uplaoded file data into a textar

  - by Deepak Narwal

  I have made a application form in which i am asking for username,password,email id and user's resume.Now after uploading resume i am storing it into hard disk into htdocs/uploadedfiles/..in a format something like this username_filename.In database i am storing file name,file size,file type.Some coading for this i am showing here $filesize=$_FILES['file']['size']; $filename=$_FILES['file']['name']; $filetype=$_FILES['file']['type']; $temp_name=$_FILES['file']['tmp_name']; //temporary name of uploaded file $pwd_hash = hash('sha1',$_POST['password']); $target_path = "uploadedfiles/"; $target_path = $target_path.$_POST['username']."_".basename( $_FILES['file']['name']); move_uploaded_file($_FILES['file']['tmp_name'], $target_path) ; $sql="insert into employee values ('NULL','{$_POST[username]}','{$pwd_hash}','{$filename}','{$filetype}','$filesize',NOW())"; Now i have two questions 1.NOw how i can display this file data into a textarea(something like naukri.com resume section) 2.How one can retrive that resume file from folder on hard-disk.What query should i write to fetch this file from that folder.I know how to retrive data from database but i dont know how to retrive data from a folder in hard-disk like in the case if user want to delete this file or he wnat to download this file.How i can do this

  Read the article

• Event handler triggered twice instead of once

  - by kwokwai

  Hi all, I am sorry that I have asked two questions in a few minutes. In a html file, I got three child DIV tags in a parent DIV tag: <div id="container"> <div id="frag-123">123</div> <div id="frag-124">124</div> <div id="frag-125">125</div> </div> Now when I click either the three child DIV tags, I will see two alert boxes pop up instead of one: The first alert box will show something like this: frag-123, and the second alert box will show something like this: container I dont know why. I just want to get the ID value of a child DIV, not the one from the parent DIV. <script> $(function() { $("div").click(function() { var imgID = this.id; alert(imgID); }); }); </script> Please help.

  Read the article

• Experience with Take home Programming Test for Interviews

  - by Alan

  Okay this is not "programming" related per-se, but it is a situation that I believe the SO audience would be more familiar with, than say an ask.yahoo.com audience, so please forgive me. I had a phone screen the other day with a company that I really want to work for. It went pretty well, based on cues from the HR person, such as "Next step we're going to send you a programming test," and "Well, before I get ahead of myself, do you want to continue the interviewing process." and "We'll send out the test later this afternoon. It doesn't sound like you'll have trouble with it, but I want to be honest we do have a high failure rate on it." The questions asked weren't technical, just going down my resume, and talking about the work I've done, and how it relates to the position. Nothing I couldn't talk through. This was last Thursday. It's now Tuesday, and haven't received the test yet. I sent a follow up email yesterday to the lady who interviewed me, but haven't gotten a response. Anyone had a similar experience? Am I reading too much into this? Or was I off the mark by thinking I had moved on to the next step in the interview process. Since this is a company I really want to work for, I'm driving myself insane enumerating all the various what-if scenarios.

  Read the article

• How Would a Newborn Baby Learn Web Programming?

  - by Mugatu

  Hello all, I chose that title because I equate my knowledge of web programming and web development with that of a newborn. Here's the shortest version of my story and what I'm looking to do: A friend and I have been coming up with website ideas for a couple years, mostly just jotting them down whenever we come up with a good, useful idea when browsing the web. For the past 6 months we've hired a couple different programmers to make a couple of the sites for us, but have been disappointed with how it's gone. Been too slow and too many miscommunications for our liking. So like the saying goes if you want something done right do it yourself, we're going to do it ourselves. I know nothing about programming, I've never written a line of code in my life. I consider myself very good with math and about as logical as you can get, but I have zero real-life programming knowledge. The sites we want to make are all pretty 'Web 2.0'ish', meaning user-generated content, commenting on posts, pages that change on the fly, etc. So here are some of my questions for anyone who's been there before: Is there a language you'd recommend learning first? Something that is a good indicator how most other languages work? What web programming languages do you recommend learning first based on popularity both now and the future. I don't want to learn a language that's going to be outdated by the time I'm an expert at it. Any specific books you'd recommend? Any general advice you'd give to someone literally starting at square zero for coding who plans on being in it for the long haul? Thanks in advance for the help

  Read the article

• How would you implement a hashtable in language x?

  - by mk

  The point of this question is to collect a list of examples of hashtable implementations using arrays in different languages. It would also be nice if someone could throw in a pretty detailed overview of how they work, and what is happening with each example. Edit: Why not just use the built in hash functions in your specific language? Because we should know how hash tables work and be able to implement them. This may not seem like a super important topic, but knowing how one of the most used data structures works seems pretty important to me. If this is to become the wikipedia of programming, then these are some of the types of questions that I will come here for. I'm not looking for a CS book to be written here. I could go pull Intro to Algorithms off the shelf and read up on the chapter on hash tables and get that type of info. More specifically what I am looking for are code examples. Not only for me in particular, but also for others who would maybe one day be searching for similar info and stumble across this page. To be more specific: If you had to implement them, and could not use built-in functions, how would you do it? You don't need to put the code here. Put it in pastebin and just link it.

  Read the article

• My ifelse statement's result depends on the actions for true/false?

  - by Antal

  Currently I am building a route for a truck to drive inside my netlogo-land. When the truck is next to the shop-patch where it should deliver, the truck needs to change its actions. However my if or ifelse statement does not seem to respond well and the answer depends on the output. With some tests: turtles ifelse ((patch (first dirx) (first diry)) = one-of neighbors4) [write "11"] [write "22"] "11" turtles ifelse ((patch (first dirx) (first diry)) = one-of neighbors4) [write "111"] [write "122"] "122" turtles ifelse (patch (first dirx) (first diry)) = one-of neighbors4 [write "111"] [write "122"] "122" turtles ifelse (patch (first dirx) (first diry)) = one-of neighbors4 [write "11"] [write "12"] "12" turtles ifelse (patch (first dirx) (first diry)) = one-of neighbors4 [write "11"] [write "22"] "11" Please note that during this time I do not move my truck, I use the command center to ask these questions (from turtle truck perspective). I am very confused about this. As the only thing I change is the action (what to write). This should not impact the true/false statement itself. Does anybody have any clue what is going on here and why the ifelse responds strange?

  Read the article

• Should a developer be a coauthor to a paper presented about the application they developed?

  - by ved

  In our organization, project teams come up with a need and funding and developers are given a basic scope and are allowed to develop the solution. There is a certain degree of implementation freedom given to the developers. They drive the solution to pilot and live deployment from its inception. If the solution is presented in a conference as a technical paper/white paper what is the protocol for the list of authors: because for the most part I see the project manager's and the dev team manager's names as authors but no mention of the actual developer. Is this correct? A lot of us developers feel pretty bummed to never see our names as the coauthors. Appreciate any pointers. Answers to the FOLLOW UP questions (1) in what field of study is the paper, and what are the standards of authorship for that field? The paper is for Flood Plain Management - there is nothing on the abstract guidelines, I have called the contact person listed for comment - waiting to hear. 2) was the paper literally about the software application as your question implies, or were the software issues incidental to the topic of the paper? The paper specifically deals with a GIS Application that is used in Coastal Engineering, yes the software is not incidental, but the meat of the paper and mentioned in the Title. 2

  Read the article

• How do I remove implementing types from GWT’s Serialization Policy?

  - by Bluu

  The opposite of this question: http://stackoverflow.com/questions/138099/how-do-i-add-a-type-to-gwts-serialization-policy-whitelist GWT is adding undesired types to the serialization policy and bloating my JS. How do I trim my GWT whitelist by hand? Or should I at all? For example, if I put the interface List on a GWT RPC service class, GWT has to generate Javascript that handles ArrayList, LinkedList, Stack, Vector, ... even though my team knows we're only ever going to return an ArrayList. I could just make the method's return type ArrayList, but I like relying on an interface rather than a specific implementation. After all, maybe one day we will switch it up and return e.g. a LinkedList. In that case, I'd like to force the GWT serialization policy to compile for only ArrayList and LinkedList. No Stacks or Vectors. These implicit restrictions have one huge downside I can think of: a new member of the team starts returning Vectors, which will be a runtime error. So besides the question in the title, what is your experience designing around this?

  Read the article

• How do I optimize this postfix expression tree for speed?

  - by Peter Stewart

  Thanks to the help I received in this post: I have a nice, concise recursive function to traverse a tree in postfix order: deque <char*> d; void Node::postfix() { if (left != __nullptr) { left->postfix(); } if (right != __nullptr) { right->postfix(); } d.push_front(cargo); return; }; This is an expression tree. The branch nodes are operators randomly selected from an array, and the leaf nodes are values or the variable 'x', also randomly selected from an array. char *values[10]={"1.0","2.0","3.0","4.0","5.0","6.0","7.0","8.0","9.0","x"}; char *ops[4]={"+","-","*","/"}; As this will be called billions of times during a run of the genetic algorithm of which it is a part, I'd like to optimize it for speed. I have a number of questions on this topic which I will ask in separate postings. The first is: how can I get access to each 'cargo' as it is found. That is: instead of pushing 'cargo' onto a deque, and then processing the deque to get the value, I'd like to start processing it right away. I don't yet know about parallel processing in c++, but this would ideally be done concurrently on two different processors. In python, I'd make the function a generator and access succeeding 'cargo's using .next(). But I'm using c++ to speed up the python implementation. I'm thinking that this kind of tree has been around for a long time, and somebody has probably optimized it already. Any Ideas? Thanks

  Read the article

• regular expression for emails NOT ending with replace script

  - by corroded

  I'm currently modifying my regex for this: http://stackoverflow.com/questions/2782031/extracting-email-addresses-in-an-html-block-in-ruby-rails basically, im making another obfuscator that uses ROT13 by parsing a block of text for all links that contain a mailto referrer(using hpricot). One use case this doesn't catch is that if the user just typed in an email address(without turning it into a link via tinymce) So here's the basic flow of my method: 1. parse a block of text for all tags with href="mailto:..." 2. replace each tag with a javascript function that changes this into ROT13 (using this script: http://unixmonkey.net/?p=20) 3. once all links are obfuscated, pass the resulting block of text into another function that parses for all emails(this one has an email regex that reverses the email address and then adds a span to that email - to reverse it back) step 3 is supposed to clean the block of text for remaining emails that AREN'T in a href tags(meaning it wasn't parsed by hpricot). Problem with this is that the emails that were converted to ROT13 are still found by my regex. What i want to catch are just emails that WEREN'T CONVERTED to ROT13. How do i do this? well all emails the WERE CONVERTED have a trailing "'.replace" in them. meaning, i need to get all emails WITHOUT that string. so far i have this regex: /\b([A-Z0-9._%+-]+@[A-Z0-9.-]+.[A-Z]{2,4}('.replace))\b/i but this gets all the emails with the trailing '.replace i want to get the opposite and I'm currently stumped with this. any help from regex gurus out there? MORE INFO: Here's the regex + the block of text im parsing: http://www.rubular.com/r/NqXIHrNqjI as you can see, the first two 'email addresses' are already obfuscated using ROT13. I need a regex that gets the emails [email protected] and [email protected]

  Read the article

• Validating Login / Changing User settings / Php Mysql

  - by Marcelo

  Hi everyone, my questions are about login, and changing already saved data. (Q1) 'Till now I've only saved input in the tables of the database (registration steps), now I need to check if the input (login steps), are the same of my table in database, in fact I have 3 types of users, then I'll have to check 3 kind of tables. Then if the input data matches with one of those 3 tables I will redirect the user to his specific area. I'm thinking about saved the submitted data $login=$_REQUEST['login']; and $password=$_REQUEST['password']; and compare with the login column in the database. Then if the login matches, I'll compare the password submitted with the one in the row, not in the column. But I don't know how to do this search and comparison,neither what to use. Then if both matches I'll redirect the user. Else I'll send an login error message. (this I know how to do) (Q2) What if need to change an already saved user ? For example to change an email address. My changing user's data web page is exactly the same like the registration user web page. Can I load the already saved options and values of registration (table user for example). Then the user will change whatever he thinks it's necessary, and then when he submits the new information, they would not create a new row in my table, but just be overwritten the old information? How can I do this? Sorry for any mistake in English, and Thanks for the attention.

  Read the article

• How to implement a download for dynamic files in asp.net with masterpages

  - by Tim

  Hello, the title says it all. I have seen some similar questions on SO like this or this, but either i have overlooked something or my requirement is different, neither works. My situation is following: i have a Masterpage one of its contentpage is called MasterData.aspx MasterData has an asp.net ajax tabcontainer control with one usercontrol in every tabpanel these usercontrols(f.e. MD_Customer.ascx)hold the main content(like a normal page) they all have GridViews in it and i want to provide an Excel-Export-Button What i've tried is is to use an iframe like here. But the function that adds the iframe to the document gets never called and therefore i never see the save-as-dialog. Maybe this is caused by using a MasterPage. Does somebody has an idea on how to provide a button in an UpdatePanel that causes an async postback, so that i can generate a CSV dynamically in codebehind and write it to the response? Thank you in advance. aspx-markup: <asp:UpdatePanel ID="UpdGridInfo" runat="server" > <ContentTemplate> <asp:Label ID="LblInfo" Font-Underline="false" runat="server" CssClass="content" ></asp:Label>&nbsp;&nbsp; <asp:ImageButton ToolTip="export to Excel" style="vertical-align:bottom" ID="BtnExcelExport" ImageUrl="~/images/excel2007logo.png" runat="server" /> </ContentTemplate> </asp:UpdatePanel> and the BtnExportExcel codebehind handler(of course it cannot work to write the csv to the response of this page): Private Sub BtnExcelExport_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles BtnExcelExport.Click Dim csv As String = tableToCsv(DirectCast(Me.GridSource, DataTable)) Response.AddHeader("Content-disposition", "attachment; filename=RuleConfigurationFile.csv") Response.ContentType = "application/octet-stream" Response.Write(csv) Response.End() End Sub

  Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >