Search Results

Search found 92127 results on 3686 pages for 'user folders'.

Page 482/3686 | < Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >

  • Lost contact with my NAS after changing its IP

    - by Beles
    I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

    Read the article

  • Minimal Lunix distribution with sshd and apt

    - by Sergey Mikhanov
    When I signed up for my Debian Linux VPS hosting and first logged on and invoked ps, there was the only user process running: sshd. As I can see, this was minimal Linux with only two things installed and configured: sshd and apt (plus all dependencies, of course). I want to build (or use existing) similar Linux distro, any advice on how to build (or pick) one? Googling "minimum linux", or "linux with sshd only" usually brings up Debian's netinstall, which is not what I want. Thanks in advance.

    Read the article

  • How to do complex port forwarding (sort of)

    - by adnan kamili
    I have a very different situation. My laptop named A, another machine B(ip-172.16.28.3) with ssh server installed and i have an account on that machine, the third machine C(ip-172.16.24.3) is a proxy server. All the machines are within a LAN, but 1- Machine B can connect to A as well as C 2- Machine A i.e.my pc, it can only connect to B and not C Now to use internet, i do the following: ssh -X [email protected] Then i type firefox and i use the firefox of machine B with proxy setings as 172.16.24.3:3128 Instead of using firefox of B, i want to use my local firefox. Is there a way through which i can connect to C via B and use my local firefox for browsing

    Read the article

  • Copssh, how to add users?

    - by Ken
    I installed copssh on Windows Vista (64-bit) here, and the installation seemed to go fine. It requires you to explicitly add users to log in, which is fine, so I opened the COPSSH Control Panel (really just an app), went to the Users tab, clicked Add, Forward, and the "User:" popup is empty. The "Domain:" popup has exactly one entry: my computer name. The "Documentation" shortcut in the start menu group is broken, but I found the folder it's supposed to point to, and I only see docs for command-line tools (which I'll investigate next). Is there something I'm missing? Is the COPSSH Control Panel just plain broken?

    Read the article

  • Cannot access https sites through any browser on Win XP?

    - by manwood
    This isnt a firewall issue, I can telnet to gmail with no problems, but all browsers (chrome, IE, firefox) return a This web page is not available. error when tring to access it through the browser. I can access the same pages, using the same browsers, on the same machine, but through a different user account with no problem. What the hell is going on? Help appreciated. Edit: This is definitely a windows setup issue - I have just created a new admin account and can access https with problems. This is seriously infuriating.

    Read the article

  • Which group memberships are necessary for simple users in Ubuntu 12.04?

    - by Joey Carson
    I'm configuring Ubuntu 12.04 for my sister. I'd like to give her a system that she really can't screw up, but can still do normal things like install software. I don't want to just add her user to /etc/sudoers so that she can become root because she could possibly mess something up. I know that I should be able to get around this by just adding her to the necessary groups, but I'm not sure which ones those should be. Could anyone suggest them or point me in the direction of some kind of list that heavily used software in Ubuntu requires group membership?

    Read the article

  • terminal tools and logs for debugging TCP issues

    - by kellogs
    I have a server which I am testing for functionality (not load, not stress) with tsung. 50 users / second, 100 total users. Judging from tsung (tsung is the testing framework) graphs, there TCP connections (red line) drops to 0 while the commenced user sessions (green line) does not. Server logs show nothing to be gripping onto, so I am speculating some kind of TCP issue. Should this be the case ? Where would I look further on the server, any logs / tools to be looking at ? Only SSH available, no GUI. > root@XMPP:~# cat /etc/lsb-release > DISTRIB_ID=Ubuntu > DISTRIB_RELEASE=11.10 > DISTRIB_CODENAME=oneiric > DISTRIB_DESCRIPTION="Ubuntu 11.10" Thank you

    Read the article

  • Changing Word mail merge data source locations in bulk?

    - by Daft Viking
    I've just moved a number of Word mail merge files, and a number of Excel spreadsheets that are the data sources for the mail merges, from a Windows XP computer to a Windows 7 computer, and now all the paths for the merge sources are incorrect (used to be c:\documents and settings\user\my documents.... now c:\users\documents....). While I can correct the path of the data source in each file individually, I was hoping that there would be some way of updating the files in bulk, as there are a relatively large number of them. Word 2007 is what is being used, but the documents are all in the previous DOC format (not DOCX).

    Read the article

  • Windows 7: Search indexing is stuck

    - by Ricket
    When I open Indexing Options, it says: 4,317 items indexed Indexing in progress. Search results might not be complete during this time. It's stuck at 4,317 though; no more items have been indexed. Worst of all, SearchIndexer.exe is taking up 100% CPU (well, 50%, but I have a dual core CPU; it's taking up all processing power it can). It is not causing hard drive activity though. I tried clicking "Troubleshoot search and indexing" at the bottom of the Indexing Options window, but it couldn't find any problem. I've also tried the repair registry key that several websites suggest; I change HKLM\SOFTWARE\Microsoft\Windows Search SetupCompletedSuccessfully to 0 and restarted the computer, and it apparently repaired because it flipped back to 1, but the same problem continues to occur. It's reducing the battery life of my laptop and making it really hot so that my fans are running all the time. I've had to disable the Windows Search service. How can I fix this? Do I need to just flat-out reformat my computer? Update: I've tried rebuilding a couple times. There's nothing unusual about the locations I have to index, and I don't have any downloads in progress or anything like that. I don't see any reason why it stopped, and I noticed it much too late to do a system restore. At this point, I'm hoping someone will offer up some secret answer that will fix the problem, thus the bounty. Another update: I tried starting the service again, just to let it try yet again. It seemed okay at first (Indexing Options showed it operating at reduced speed due to user activity, and the number of files was going up). A while later I checked, and the service had stopped. Event viewer revealed some errors like this: Log Name: Application Source: Application Error Date: 2/1/2010 7:34:23 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ricky-win7 Description: Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: NLSData0007.dll, version: 6.1.7600.16385, time stamp: 0x4a5bda88 Exception code: 0xc0000005 Fault offset: 0x002141ba Faulting process id: 0x13a0 Faulting application start time: 0x01caa39f2a70ec02 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\System32\NLSData0007.dll Report Id: b4f7a7ae-0f92-11df-87fc-e5d65d8794c2 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-02T00:34:23.000000000Z" /> <EventRecordID>10689</EventRecordID> <Channel>Application</Channel> <Computer>ricky-win7</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7600.16385</Data> <Data>4a5bcdd0</Data> <Data>NLSData0007.dll</Data> <Data>6.1.7600.16385</Data> <Data>4a5bda88</Data> <Data>c0000005</Data> <Data>002141ba</Data> <Data>13a0</Data> <Data>01caa39f2a70ec02</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\System32\NLSData0007.dll</Data> <Data>b4f7a7ae-0f92-11df-87fc-e5d65d8794c2</Data> </EventData> </Event> If you are having the same error and arrived here from a Google search, please comment or add an answer detailing your progress on this, if any...

    Read the article

  • SQL Server Installer Closes Silently Without Errors

    - by ashes999
    When I run the SQL Server 2008 R2 Express installer (32-bit or 64-bit), nothing happens. It will get to the screen where it asks me to accept the terms of license and send anonymous feedback; I check off both boxes and click Next, and it automatically starts installing the Support Files. And then the window disappears. I tried looking through the log files, but didn't see any errors. I've tried: x64 SQL Server R2 express x86 SQL Server R2 express X64 SQL Server R2 (full) X64 SQL Server Management Studio Of these, only management studio installed correctly; the two express editions failed silently, and the full version gave me different errors. I also tried running in Administrator mode (despite being logged in as an administrator user), but again, no difference.

    Read the article

  • How to force a "do you really want to shutdown?" dialog in Windows 7?

    - by Vokuhila-Oliba
    Sometimes I want to choose "Logout current user", but then I hit "Shutdown" by accident. Nearly everywhere else Windows 7 is asking "do you really want to do this? Yes/No" - but that's not the case when I hit the "Shutdown" button. Windows 7 shuts down immediately without giving me the chance to correct my mistake. So I am wondering - why does Windows shut down immediately without asking "really do that?" in this case? Is there a way to change this behavior? For example, could I force Windows to display a dialog asking "Do you really want to shutdown?"? I tried to change this behavior with the policy editor. It seems to be very easy to completely remove the Shutdown button from the Start menu, but I couldn't find an entry to turn on such a Yes/No dialog.

    Read the article

  • Openfire on Mac OS X: can't log in after setup

    - by Tom
    Hey all, I'm trying to set up Openfire (http://www.igniterealtime.org/projects/openfire/) on Mac OS X. The install goes well, and I can start the server and enter the admin console via its System Preferences pane. I run the setup, including specifying the password for the admin user. However, when I try to log into the admin console, I get the message "Login failed: make sure your username and password are correct and that you're an admin or moderator." What gives? I've tried to RTFM, but the documentation seems to be really sketchy. Nowhere is the setup process mentioned in the install docs.

    Read the article

  • Ubuntu displaying GDM but no login

    - by Shawn
    Ubuntu (Wubi, Lucid Lynx) boots and shows the login screen itself with the background and plays the boot sound but a list of users is never displayed. A mouse is on screen and I can move it but, alas, it does nothing. Dropping to a virtual term with CTRL+Alt+F# drops me to a cursor but I can't actually input anything. I can't boot into single-user with GRUB since it's Wubi and it never specifies a boot kernel directly in GRUB's initial menu.lst (only in files that it then reads from). Other details that may be helpful: Single monitor Same video card that's been working for months No new hardware Edit: I ssh'd in since it evidently booted up the sshd which is handy. dpkg-reconfigure gdm didn't do anything helpful. I do, however, get a "no seat-id found" when manually running it.

    Read the article

  • use of Lsh and Rsh keys in windows 7 calculator

    - by Tom
    Does anyone know the function of the Lsh and Rsh keys in Windows 7 calculator when it is in Programmer's mode. One would think it's meant to shift bits left and right, but that doesn't seem to happen: sometimes nothing happens, other times I get a 'Result not defined' message in the display. Has anyone figured it out yet, is this a known bug? While we're at it, does anyone have suggestions for a good calculator, one with a decent reference guide / user guide (windows help doesn't seem to give any hints on what any of the keys do, in any mode).

    Read the article

  • Should USB controller drivers be updated?

    - by Coldblackice
    Should USB controller drivers be updated? In Windows 7, many of the core system devices/buses/controllers still use stock Microsoft drivers dating back to 2006 -- things such as USB controllers and the PCI bus (and subsequent devices in the tree). Should these be getting updated? I would think that surely there would have been improvements/fixes/updates to some or any of these drivers by now, now over 7 years old. Does Windows know "best" in this case, updating these respective drivers when it's needed, or should the user be keeping an eye out for drivers in this "vein" of devices (meaning integrated/core/non-pluggable system devices that are built into the motherboard)?

    Read the article

  • SharePoint Designer not syncing consistently

    - by normalocity
    I've got a user who uses SharePoint Designer to maintain an internal intranet site. When syncing (remote-to-local) it appears to work at first, but usually hangs about 2-3 minutes into the sync, when he's syncing it to a sub-folder of his "My Documents". In this case, his "My Documents" is stored on a network share/profile. When I do the same thing, it works for me. The difference? My "My Documents" folder is locally stored. In other words, he's syncing from the remote server, into a network share. I'm syncing from the remote server, into a local drive. Any idea why having the sync destination on a network share, vs. a local drive would cause this? When it locks up, we can navigate to his "My Documents" folder still - so I don't believe that we're loosing connection to his drive - unless perhaps the connection is intermittent, and SharePoint Designer isn't re-trying the sync.

    Read the article

  • Unset the system immutable bit in Mac OS X

    - by skylarking
    In theory I believe you can unlock and remove the system immutable bit with: chflags noschg /Path/To/File But how can you do this when you've set the bit as root? I have a file that is locked, and even running this command as root will not work as the operation is not permitted. I tried logging in as Single-User mode to no avail. I seem to remember that even though you are in as root you are in at level '1'. And to be able to remove the system-immutable flag you need to be logged in at level '0'. Does this have something to do with this issue?

    Read the article

  • What NAS setup for two-way syncing over the internet?

    - by Jamse
    I have family living a few hours away and have a lot of files that I would like to share - especially lots of folders of digital photos, but also documents etc. - partially so they can see them, partially so I can have access when I visit them and partially for backup / redundancy purposes. My current hard drives on my main machine are getting pretty full anyway, and I have a MythTV box where my music is currently stored, so I was thinking of getting a NAS anyway. And at the other end my family have a few computers, so they would probably benefit from a NAS too. My general idea (though I'm willing to shift on this if there are any bright ideas about other ways of achieving my objectives) is to get a matching pair of NASs and have them sync over the internet. (To cut down on bandwidth use I would get them in sync locally to start with.) Having read around as best I can it seems that syncing over the internet is generally only a feature on quite high end units. However, I have seen that QNAP seem to feature this on their TS-110 and TS-210 units, which might work (they call it "remote replication"). They seem pretty reasonably priced for what they are, but of course with buying 2 of them and then adding the drives (say 1TB or 2TB each) I'd be looking at about £400 total. So, I'm looking for recommendations really. I don't want to spend more than the QNAPs would cost me, but any other ideas would be most appreciated. I am comfortable with technology and tinkering around, but I don't have as much time for that as I would like, so I guess I would favour solutions that require less tinkering rather than more (even though that's less fun!). Any thoughts would be welcome, as would any comments from people who have used the QNAP boxes for this. Thanks in advance. Some specifications: Two-way syncing. Changes made at either end should be synced to the other. There shouldn't be one unit that is effectively a read-only mirror of the other. Not real time. The syncing doesn't need to be real time - if it updated, say, daily overnight that would be fine. Set and forget. I would prefer minimal user interaction once set up - it would be great if syncs were scheduled and automatic. OS independence. I am running Windows XP plus an Ubuntu-based MythTV box. At the other end there are Windows 7 and Windows XP machines, plus a networked TV set top box which I think can play files off the network. Machine independence. I would favour a system that is self-contained, i.e. not reliant on any particular PC being switched on. If the system had enough else going for it I could perhaps work around it at this end, where I only have one PC that's used as such, but it would be harder at the other where there are at least two PCs that might be accessing the files. Notifications. I guess things like getting an email notification if the syncing fell over for any reason would be useful, though it's not a deal breaker. Update I've been digging some more and it looks like QNAP's Remote Replication function is actually just Rsync, so only really suitable for one-way syncing. I've posted on their forum to double check, but I think that's the case. In which case, I think the focus of my question is now either: do any reasonably-priced NASs support bidirectional syncing over the internet?, or has anyone had any luck installing onto NASs for this purpose? (Also, updated question to clarify that I'm after two-way syncing.)

    Read the article

  • Reliable procedure/tool for removing print drivers in Windows 7 (domain environment)

    - by ultrasawblade
    One of the troubleshooting steps in resolving printer-related issues with any version of Windows is to remove installed print drivers and then reinstall the drivers. This is a domain environment and drivers are pulled from a print server. I've had occasion to need to do this on a user's system running Windows 7 Enterprise 64-bit. These procedures don't work: Removing the printer from Devices and Printers (doesn't remove driver obviously) Doing the above, going into Server Properties, and attempting to remove the driver (fails with a "driver in use" error) Opening an empty mmc, adding the Print Management snap-in, and attempting to do the above. Doing sc stop spooler and sc start spooler before doing both of the above Now I know it's possible to remove drivers with the spooler service stopped and then going into the spool directory, as well as deleting registry entries. I'm asking if a tool exists to do this where I can just select the driver in question and it be removed.

    Read the article

  • Detecting damage done by virus

    - by user38471
    This morning after I went to college, a virus infected my PC without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagnosed with was "fakespypro" on a fully updated Windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appreciated.

    Read the article

  • Compiz shutdown hook?

    - by ???
    I want to check 10+ local Git repositories if they have any unpushed commit, before shutdown. (I always forgot to push them, so later, the next morning I came office and back home again) I think maybe the shutdown process can check some conditions to meet, if any condition is not met, then give the user the choice to continue to shutdown or just cancel. Then, I can write something to hook the shutdown to check my Git repository to push. EDIT I have changed the title from Ubuntu shutdown hook to Compiz shutdown hook. I want to hook to the small lovely shutdown button, rather then click another ugly shortcut icon on the desktop.

    Read the article

  • What is an application for "web site recognition"?

    - by OSX Jedi
    This explanation isn't clear to me. Let me describe an application for web site recognition. Suppose that we want to know what everyone is doing with the web at starbuck. We can use wireshark or other programs to sniff all the packets. By grouping all the secondary connections with the primary one, then we would be able to get a much easier picture of user's primary activities. Is this talking about being able to recognize which websites each of the laptops are connecting to?

    Read the article

  • Wordpress Automatic Updating/Installing Plugins Permissions

    - by karmic
    I am using the latest Wordpress and I have always had issues with the automatic updater. For the files in the wordpress directory, i set them to permission 770, and add the webserver user 'www-data' as the group owner. I use lighttpd. However, the automatic updating plugins or installing plugins does not work. It works if I chmod 777 the files or if I set the actual owner to the web server as well. What are the best permission settings for security while still allowing the updating feature to work properly in wordress? Also, by 'not work' i mean, it will go to the screen that asks me for FTP credentials when I try to update.

    Read the article

  • Auto switching between wired and wireless connections

    - by Joe
    How about this situation. Our business deals a lot with medical information. And some of our clients have demands based off HIPPA, etc. There is one now where they do not want an employee to have both wired and wireless on at same time. If the wireless is on the wired needs to be turned off automatically and vice versa. However, this can not be up to the end user to manage! I have looked for third party applications and only have found http://www.wirelessautoswitch.com Does anyone know of anything else that is out there? Or possible something that can be done via group policy, etc.?

    Read the article

  • Internet Explorer 10 auto-correct randomly capitalises words

    - by Andreas Rejbrand
    I use Internet Explorer 10 on my Windows 7 laptop (because the fingerprint browser add-on only works in IE). I have noticed that IE 10 has a built-in spellchecker, which is great. Now, I write about 90 % English and 10 % Swedish on web sites, so it is somewhat unfortunate that it isn't possible to change the spell-checker language 'on-the-fly'. But that's a minor issue. The main problem is that, when I write English comments, the spell-checker (apparently randomly) capitalises some Words. For instance, the 'words' of the previous sentence was changed automatically to 'Words'. Another Word that is Always capitalised is Before. (Yes, the Three Words that are incorrectly capitalised in the previous sentence are due to the auto-correct 'feature', and apparently 'three' is also a problematic word.) Is this really something that happens to every (bilingual) user? Is there any way to fix the issue (preferably without disabling the spell-checker altogether)?

    Read the article

< Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >