Search Results

Search found 77947 results on 3118 pages for 'i dont know'.

Page 483/3118 | < Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490  | Next Page >

• Installation on SSD with Windows preinstalled

  - by ebbot

  I bought a laptop with this fancy SSD drive, fancy new UEFI aso. I figured at first Windows out Ubuntu in but after doing 3 DoA on 3 laptops in one day I realized that maybe keeping Windows could come in handy. So dual boot it is. And this is what I've got: Disk 1 - 500 Gb HD 300 Mb Windoze only says "Healthy" don't know what it's for. 600 Mb "Healthy (EFI partition)" 186.30 Gb NTFS "OS (C:)" "Healthy (Boot, Page File, Crash Dump, Primary Partition)" 258.45 Gb NTFS "Data (D:)" "Healthy" 20.00 Gb "Healthy (Recovery Partition)" Disk 2 - 24 Gb SSD 4.00 Gb "Healthy (OEM Partition)" 18.36 Gb "Healthy (Primary Partition)" So I'm not sure what the first partition on each drive does (the 300 Gb on the HD and the OEM Partition on the SSD. Nor do I know what Data (D:). I think the 2nd partition on the SSD is for some speedup of Windoze. I'm debating if I should shrink the OS (C:) drive to around 120 GB or so. Clear the Data (D:) and also use the whole SSD for Ubuntu. That would leave me 24 Gb for e.g. / on the SSD and some 320 Gb on the HD for /home and swap. Is this a reasonable setup? Do I need to configure fstab for the SSD differently to a HD?

  Read the article

• News Applications internal working [on hold]

  - by Vijay

  How does news applications work other than RSS Feed based applications? I know some of them take the RSS content from the source site.But sometimes I see, those applications show - Title Description Date Image video etc. Even though when I see the original site's rss, image, video is not there in rss. So how does one get that to show in there applications? Some applications even shows feeds from magazine sites, newspaper sites. How do these applications work? I am creating an application which will link to different news sites feeds categorized (like top news, technology, games, articles etc.) On the front page it will show the website names, then on selection of any news site it will get the feed from that website and show it to user. So I would like to know All the fetching of data from should be done on user selection or data should be prefetched? Detailed information I want to fetch from the original like provided in the rss data. How should I go about it?

  Read the article

• Efficient algorithm for Virtual Machine(VM) Consolidation in Cloud

  - by devansh dalal

  PROBLEM: We have N physical machines(PMs) each with ram Ri, cpu Ci and a set of currently scheduled VMs each with ram requirement ri and ci respectively Moving(Migrating) any VM from one PM to other has a cost associated which depends on its ram ri. A PM with no VMs is shut down to save power. Our target is to minimize the weighted sum of (N,migration cost) by migrating some VMs i.e. minimize the number of working PMs as well as not to degrade the service level due to excessive migrations. My Approach: Brute Force approach is choosing the minimum loaded PM and try to fit its VMs to other PMs by First Fit Decreasing algorithm or we can select the victim PMs and target PMs based on their loading level and shut down victims if possible by moving their VMs to targets. I tried this Greedy approach on the Data of Baadal(IIT-D cloud) but It isn't giving promising results. I have also tried to study the Ant colony optimization for dynamic VM consolidating but was unable to understand very much. I used the links. http://dumas.ccsd.cnrs.fr/docs/00/72/52/15/PDF/Esnault.pdf http://hal.archives-ouvertes.fr/docs/00/72/38/56/PDF/RR-8032.pdf Would anyone please clarify the solution or suggest any new approach/resources for better performance. I am basically searching for the algorithms not the physical optimizations and I also know that many commercial organizations have provided these solution but I just wanted to know more the underlying algorithms. Thanks in advance.

  Read the article

• How to Activate wifi in Toshiba Satellite C655?

  - by user4106

  I've recently bought a Toshiba Satellite C655. It came with Windows 7 preinstalled. I've never had a notebook before, but as a desktop user, I was a Ubuntu user since 2 years, and I've never had a problem with drivers, wifi, etc. When I tried to install the Ubuntu 10.04, and also the new and fresh 10.10, in my new laptop, I experienced some troubles with some of the componentes of my computer. For example, I was not able to activate my wi-fi card, although I know the kernel recognizes it correctly, because when doing "lspci" at the terminal, it was listed. Anyhow, I'm not able to "activate" the wifi, or whatever it's necessary to do in order to be able to search for public networks available, and to connect with them. The wifi-card the laptops brings is the (the lspci output): 03:00.0 Network Controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01). It's anything in you can help me? Thanks a lot in advance! Edit Neither solution seems to work. In first place, i've tried installig what hhlp told me. After the installation, nothing seems to change: on right-clicking the wireless icon, it seems to recognize the card, because the option "Enable wifi" was ticked. But, once again, i was not able to "turn the wi-fi" on. In second place, i didn't try installing the drives, because the card is already recongnized. The issue is that i cannot seem to turn it on! One thing i've probably missed is that the Toshiba cames with a windows sofntware that allows you to enable / disable the wifi tools. So, it does not have an external "button" to turn it off. I don't know if that's the problem, but i have the feeling that the issue may be aroud there: in how to turn ON the wifi-signal (or to verify if it's on or off) in my ubuntu.

  Read the article

• What precaution should I take to hire online freelancer designers? [on hold]

  - by tomDev

  For quite some time my company is super busy with our apps, and a few days ago someone contacted me by email offering his services to help me as a graphic designer. He has a fair price, a flickr portfolio (with great stuff but not popular at all), same on Twitter. I was really considering in hiring him for some specific service, but the question is... what precaution should I take when hiring someone I have no idea who is? I can't even be sure I have his real name and his real country. How do I make a contract? How do I pay? How do I know he will not sue us after the graphics reach the App Store asking for more money? And of course, how do I know he will actually do the service and not steal from some stock service? Am I a bit paranoiac or is this a common deal with graphics designers? PS: if someone asks I can provide his flickr, but I think this is a general question and not specific for this designer.

  Read the article

• How to build an API on top of an existing Rails app with NodeJs and what architecture to use?

  - by javiayala

  The explanation I was recently hired by a company that has an old RoR 2.3 application with more than 100k users, a strong SEO strategy with more than 170k indexed urls, native android and ios applications and other custom-made mobile and web applications that rely on a not so good API from the same RoR app. They recently merged with a company from another country as an strategy to grow the business and the profit. They have almost the same stats, a similar strategy and mobile apps. We have just decided that we need to merge the data from both companies and to start a new app from scratch since the RoR app is to old and heavily patched and the app from the other company was built with a custom PHP framework without any documentation. The only good news is that both databases are in MySQL and have a similar structure. The challenge I need to build a new version that: can handle a lot of traffic, preserves the SEO strategies of both companies, serve 2 different domains, and have a strong API that can support legacy mobile apps from both companies and be ready for a new set of native apps. I want to use RoR 3.2 for the main web apps and NodeJs with a Restful API. I know that I need to be very careful with the mobile apps and handle multiple versions of the API. I also think that I need to create a service that can handle a lot IO request since the apps is heavily used to create orders for restaurants at a certain time of the day. The questions With all this in mind: What type of architecture do you recommend me to follow? What gems or node packages do you think will work the best? How do I build a new rails app and keep using the same database structure? Should I use NodeJS to build an API or just build a new service with Ruby? I know that I'm asking to much from you guys, but please help me by answering any topic that you can or by pointing me on the right direction. All your comments and feedback will be extremely appreciated! Thanks!

  Read the article

• Is there any professional way to illustrate difference between 2 diagrams?

  - by lamwaiman1988

  I made a documented which is to describe the difference between the same logical structure from different version ( e.g Structure A from version 8 and Structure A from version 9 ). Luckily I've got the logical structure diagram from the 2 functional specification. I've managed to copy the image of each logical structure and paste them in MS Word and compare the 2 version side by side. I don't know if there is a standard way to illustrate the difference. I simply draw a cross over the removed logical member from the previous version and draw a rectangle around the new logical member of the next version. I know my way is kinda childish. I am wondering how to present them professionally. In addition, You won't believe this, but MS Word doesn't have a shape of CROSS, so I am actually using a multiplication sign that look like a giant monster: This is why I hate myself. Unlike 2 separated lines, this shape is easy to use, draw and resize. I am wondering if MS Word would care about a normal cross.

  Read the article

• How to correct a junior, but encourage him to think for himself? [closed]

  - by Phil

  I am the lead of a small team where everyone has less than a year of software development experience. I wouldn't by any means call myself a software guru, but I have learned a few things in the few years that I've been writing software. When we do code reviews I do a fair bit of teaching and correcting mistakes. I will say things like "This is overly complex and convoluted, and here's why," or "What do you think about moving this method into a separate class?" I am extra careful to communicate that if they have questions or dissenting opinions, that's ok and we need to discuss. Every time I correct someone, I ask "What do you think?" or something similar. However they rarely if ever disagree or ask why. And lately I've been noticing more blatant signs that they are blindly agreeing with my statements and not forming opinions of their own. I need a team who can learn to do things right autonomously, not just follow instructions. How does one correct a junior developer, but still encourage him to think for himself? Edit: Here's an example of one of these obvious signs that they're not forming their own opinions: Me: I like your idea of creating an extension method, but I don't like how you passed a large complex lambda as a parameter. The lambda forces others to know too much about the method's implementation. Junior (after misunderstanding me): Yes, I totally agree. We should not use extension methods here because they force other developers to know too much about the implementation. There was a misunderstanding, and that has been dealt with. But there was not even an OUNCE of logic in his statement! He thought he was regurgitating my logic back to me, thinking it would make sense when really he had no clue why he was saying it.

  Read the article

• Android: Not able to experiment on own?

  - by user221287

  I have just started learning Android App Development a few days ago, with prior knowledge of C/C++, HTML and CSS. This is the situation I am facing Repeatedly: I am learning from a Video Tutorial Series, after each video, or each few videos, I say myself: Let's use what I have just learnt in the simple (and also "meaningless") app that I have made so far by watching the tutorials. I start implementing it, but then after a few minutes, I realize that I cannot do it because I do not know a few other syntax related to the particular thing, (or) I do not know whether these things can be combined with these other things by the use of . (dot). Whatever I try, I get either an error in eclipse or "Sorry...the app com.example.simple has stopped unexpectedly...." when the app runs. Then I search StackOverflow, Google and learn that what I want to implement requires learning about a few more classes, syntax and creating a few more java classes. I am not able to experiment on my own. Is it normal? Is it the HARD-WAY in which one is supposed to learn? Should I first learn Java and then come back to Android - would that be helpful?

  Read the article

• Implementing unit testing at a company that doesn't do it

  - by Pete

  My company's head of software development just "resigned" (i.e. fired) and we are now looking into improving the development practices at our company. We want to implement unit testing in all software created from here on out. Feedback from the developers is this: We know testing is valuable But, you are always changing the specs so it'd be a waste of time And, your deadlines are so tight we don't have enough time to test anyway Feedback from the CEO is this: I would like our company to have automated testing, but I don't know how to make it happen We don't have time to write large specification documents How do developers get the specs now? Word of mouth or PowerPoint slide. Obviously, that's a big problem. My suggestion is this: Let's also give the developers a set of test data and unit tests That's the spec. It's up to management to be clear and quantitative about what it wants. The developers can put it whatever other functionality they feel is needed and it need not be covered by tests Well, if you've ever been in a company that was in this situation, how did you solve the problem? Does this approach seem reasonable?

  Read the article

• ubuntu 12.04 will not play DVDs

  - by ayelet

  First off, I'm not just a newbie, I'm clueless! So your answers will need to be in complete idiot language (let's say I'm computer saavy, and I can follow directions,but I've never programmed anything and assume I don't understand any abbreviations. So why am I running linux? b/c windows was driving me nuts!! and my friend convinced me. day-to-day operations, we're doing fine, but when it comes to problems, I've got no clue what I'm doing!) So here's what's going on, my machine is an HP pavilion dv6, my optical drive is a standard cd/dvdrw, when i load an audio cd of any type (burned, official, etc,..) I have no problems, when I pop in a dvd - i get nothing. the dvd icon comes up in my launch tray, when I open VLC player I can find the dvd in the folder... but it won't play. I can watch movies I've downloaded with no problem, I can also watch movies off an external hard drive. The only thing I've tried is removing vlc and reinstalling, and I tried installing a different player (gnome maybe? I don't remember). none of that worked. Again, i can follow directions, but you need to be very specific and don't assume I know anything going in. (I mean, I know basic stuff, but nothing too technical.) PLEASE HELP!!! MY KIDS ARE DRIVING ME CRAZY!!! Thanks!!

  Read the article

• Architecture for dashboard showing aggregated stats [on hold]

  - by soulnafein

  I'd like to know what are common architectural pattern for the following problem. Web application A has information on sales, users, responsiveness score, etc. Some of this information are computationally intensive and or have a complex business logic (e.g. responsiveness score). I'm building a separate application (B) for internal admin tasks that modifies data in web application A and report on data from web application A. For writing I'm planning to use a restful api. E.g. create a new entity, update entity, etc. In application B I'd like to show some graphs and other aggregate data for the previous 12 months. I'm planning to store the aggregate data for each month in redis. Some data should update more often, e.g every 10 minutes. I can think of 3 ways of doing this. A scheduled task in app B that connects to an api of app A that provides some aggregated data. Then app B stores it in Redis and use that to visualise pages. Cons: it makes complex calculation within a web request, requires lot's of work e.g. api server and client, storing, etc., pros: business logic still lives in app A. A scheduled task in app A that aggregates data in an non-web process and stores it directly in Redis to be accessed by app B. A scheduled task in app A that aggregates data in a non-web process and uses an api in app B to save it. I'd like to know if there is a well known architectural solution to this type of problems and if not what are other pros/cons for the solution I've suggested?

  Read the article

• Re: # 47209 How to copy an Existing HD to a new one and have it be bootable?

  - by user281151

  Help please! My backup method of choice is to clone my "working" drive to another identical drive. I have 2 windows drives and I clone my working one to the other one once per month. No problem - each will boot if I select it. Now with the lack of future support for XP, I am getting familiar with Ubuntu 14.04 LTS. I have it on one drive and I have a second identical drive that I want to be able to clone it to once/month. Not as necessary to do this with Ubuntu as with windows, I know, but I'm anal. So I have followed #47209 MestreLion's procedure with just the two Ubuntu drives "on line". I.e., boot my "working" drive with Live CD, use Gparted to be sure I know what's what, open terminal and enter and execute the dd command, Go to bed till the clone is done, shut down the computer, disconnect the input/source drive, boot up using BIOS to select the remaining output drive. The drive starts fine but all is not OK. It puts up a screen that says I'm on a Guest Session and asks for a password. Well, for one thing I have my Ubuntu set up to start without a password being entered. I have one, of course, I put it in but it isn't accepted. I can't get by this Guest Session screen. I am fine, of course. I can disconnect this drive, hook up my "main" ubuntu drive and all the rest, and go on with my business. But I don't have the desired "emergency backup" drive working where I could jump on and use it immediately if I needed it. Can someone give me some guidance here?? What (else) do I need to do. Love Ubuntu but learning. Thanks, Wes.

  Read the article

• Steering evaluate fitness

  - by Vodemki

  I've made a simple game with a steering model that manage a crowd of agents. I use an genetic algorithm to find the best parameters to use in my system but I need to determine a fitness for each simulation. I know it's something like that: number of collisions * time to reach goal * effort But I don't know how to calculate the effort, is there a special way to do that ? Here is what I've done so far: // Evaluate the distance from agents to goal Real totalDistance(0.0); for (unsigned i=0; i<_agents.size(); i++) { totalDistance += _agents[i]->position().distance(_agents[i]->_goal->position()); } Real totalWallsCollision(0.0); for (unsigned i=0; i<_agents.size(); i++) { for (unsigned j=0; j<walls.size(); j++) { if ( walls[j]->inside(_agents[i]->position()) ) { totalCollision += 1.0; } } } return totalDistance + totalWallsCollision; Thanks for your help.

  Read the article

• Which are the best ways to organize view hierarchies in GUI interfaces?

  - by none

  I'm currently trying to figure out the best techniques for organizing GUI view hierarchies, that is dividing a window into several panels which are in turn divided into other components. I've given a look to the Composite Design Pattern, but I don't know if I can find better alternatives, so I'd appreciate to know if using the Composite is a good idea, or it would be better looking for some other techniques. I'm currently developing in Java Swing, but I don't think that the framework or the language can have a great impact on this. Any help will be appreciated. ---------EDIT------------ I was currently developing a frame containing three labels, one button and a text field. At the button pressed, the content inside the text field would be searched, and the results written inside the three labels. One of my typical structure would be the following: MainWindow | Main panel | Panel with text field and labels. | Panel with search button Now, as the title explains, I was looking for a suitable way of organizing both the MainPanel and the other two panels. But here came problems, since I'm not sure whether organizing them like attributes or storing inside some data structure (i.e. LinkedList or something like this). Anyway, I don't really think that both my solution are really good, so I'm wondering if there are really better approaches for facing this kind of problems. Hope it helps

  Read the article

• PHP hosting some info required [closed]

  - by mtk

  I have recently given a control of newly bought hosting space and the domain account. There is a technical team from the hosting site to help out with problems, but that is a long process, i.e. log a ticket, wait for a long time, and I don't get the correct answer in the first shot. I was wondering, if anyone has any helpful guide and how one must go with hosting a site. Any info that must be know w.r.t to cpanel? Any other useful stuff if any one has, or could point me to ? Just to give a few difficulties: The same php code working well on local machine, giving error on remote as "File not found". The file is present indeed as I have ftp'ed all the files correctly. session_start error are outputted to html page with warning "Header already sent". and many more technical things, that work well on local but not on actual hosting server. So, if anyone has any helpful stuff in this reference, as to what all changes are required or what a programmer must be aware from a hosting perspective, please let me know. Note I am hosting a PHP site with mysql db, on a shared environment.

  Read the article

• How can I speed up boot on one of my machines?

  - by Korneel Bouman

  I have a Gateway all in one machine (2 gig Intel Core 2 Duo T7250 dual core processor, 2 gig RAM - full specs) on which I installed 10.10. Once it has booted it's fine, but it takes forever to boot. This is what happens: 1. Boot starts with cursor flashing for about 10-15 seconds 2. Cursor disappears for 1.5 - 2 minutes 3. Cursor reappears, blinks a few seconds more, boot finishes in another 10 seconds 4. Login screen I have another machine with marginal better specs that boots up in no time (basically the above minus the two minute delay). Things I've done: enabled verbose mode for grub nothing is showing until after 2 minute pause. checked syslog last message before pause is a message from alsa saying the process is already running (or something similar... going from memory here...) It could be something sound related as the built in speakers are not working (sound card is recognized though and headphones work). Anyway, it's not the end of the world, but it's annoying and I'd like to know what's going on... Many thanks, and let me know if more info is needed.

  Read the article

• Selecting objects on a 2D map

  - by Dave

  I have a object selection function by checking the mouse click and getting the relevant object. How ever there is a rare situation where if one object is partially behind the other then both objects are in the given area so im wondering how I can make the game know which one was selected, as currently my method does not know. This is my function that works it out: function getobj(e){ mx = e.pageX - curleft; //mouse click x my = e.pageY - curtop; //mouse click y function searchSprites(sprites, x, y) { var matches = [], i = 0, data = null; for (i = 0; i < spritea.length; ++i) { data = spritea[i].data; if (x > data[0] && y > data[1] && x < data[2] && y < data[3]) { var imageData = ctx2.getImageData(x, y, 1, 1); if(imageData.data[3] !== 0){ return [spritea[i].id]; i = spritea.length; } } } } res = searchSprites(spritea, mx, my); bid = res[0]; if(bid === '1'){ alert('You selected the skyscraper in front!'); }else if(bid === '3'){ alert('You selected the skyscraper behind!'); } } Image of the map: It keeps telling me I clicked the skyscraper behind which is not necessarily what the user is trying to do. How can I improve the accuracy of this ?

  Read the article

• Getting expired domain name - most effective route?

  - by kcdwayne

  There is a domain name I have been wanting for years that was used as a parked page (read: cybersquatted) that has entered into WHOIS's redemptionPeriod stage. The domain has been expired for 61 days now - after contacting the Registar, they informed me that it would stay in redemption for 75 days. After which, it would either be sold to resellers, or sent back to the public registry. (I have since sent a followup message requesting the reseller they use.) My question is: What is the best way to proceed? I know there is at least one competitor that would love to have this name, but I'm unsure if they even know it's expiring. I did not tell the Registar the domain in question, as they seem geared towards cybersquatting, and I do not trust them. Domain Front Running sucks. Should I use a backorder service? Should I just take my chances and try to grab it after75 days? I checked an auctionhouse by manually browsing their expired domains - it wasn't there.

  Read the article

• &ldquo;Why do transactional messages all have the same priority?&rdquo;

  - by John Breakwell

  I answered this question on the MSMQ forum on MSDN and thought it worth sharing here. The poster wanted to know why all transactional messages have a fixed priority of zero (instead of 0 through 7). They wanted the guaranteed delivery of messages to a queue but wanted to assign different levels of priority. Some aspects of MSMQ were defined way back in the last century and this is one of them. If I remember right, the reason was to avoid the following scenario: You have a single transaction of 3 messages (a, b and c) with priorities 5, 3 and 4 respectively. The messages are sent in order a,b,c The messages arrive in the queue and are arranged in order a,c,b to reflect priority order This breaks the guaranteed order part of the transaction.  I know that very few people send more than one message in a transaction but that is a scenario that MSMQ has to be able to handle; for the majority, including yourself, this scenario is irrelevant which is why you are surprised by the absence of transactional priorities. The options, therefore, available to the Microsoft developers were to: Implement code that allowed you to send messages with variable priority as long as any messages within the same transaction were the same priority, or Define a set priority for all transactional messages As you can understand, option 1 would be a complicated arrangement with all the necessary enforcement, error handling, user education and documentation, etc. Sure, it would have been possible to implement option 1 but I expect the product group decided to invest the development time in some other aspect of MSMQ. Now, with five versions out there, it would be confusing to change how the product operates, in addition to potentially breaking exisiting systems that have been working fine for years. So, balancing cost and risk against customer demand, I would not expect this feature to ever change.

  Read the article

• Can't install GTX 680 drivers on 12.04

  - by user68945

  I recently installed Ubuntu 12.04 on my desktop. I have three monitors, and after installing, ubuntu only detected one at 1080p. I downloaded the driver from the nvidia website, but when I stop lightdm and try to run the driver, it gives me an error message: ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option. I tried instead to install the driver via the terminal, with the X ppa. The installation seemed to work, but when I rebooted, my display was at 640x480 resolution, with no other options for resolution. The NVIDIA X Server settings program is there now, but when I run it, it simply tells me that I don't seem to be using their driver, and that I should run nvidia-xconfig as root. Doing so doesn't help, I simply get the same issue again. I checked the file at /etc/X11/xorg.conf, and it's an NVIDIA file (has nvidia in the header). Does anyone know something else I can try? EDIT: Forgot to mention, I tried installing drivers via the "Additional Drivers" GUI utility, there were two options, one of them marked "(post-release updates)". I tried both of them, in both cases it tried to download and install for a while, then said that there was an error, and that a description could be found at /var/log/jockey.log. Both logs were over 700 lines

  Read the article

• Finding which tiles are intersected by a line, without looping through all of them or skipping any

  - by JustSuds

  I've been staring at this problem for a few days now. I rigged up this graphic to help me visualise the issue: http://i.stack.imgur.com/HxyP9.png (from the graph, we know that the line intersects [1, 1], [1, 2], [2, 2], [2, 3], ending in [3,3]) I want to step along the line to each grid space and check to see if the material of the grid space is solid. I feel like I already know the math involved, but I haven't been able to string it together yet. I'm using this to test line of sight and eliminate nodes after a path is found via my pathfinding algorithms - my agents cant see through a solid block, therefore they cant move through one, therefore the node is not eliminated from the path because it is required to navigate a corner. So, I need an algorithm that will step along the line to each grid space that it intersects. Any ideas? I've taken a look at a lot of common algorithms, like Bresenham's, and one that steps at predefined intervals along the line (unfortunately, this method skips tiles if they're intersecting with a smaller wedge than the step size). I'm populating my whiteboard now with a mass of floor() and ceil() functions - but its getting overly complicated and I'm afraid it might cause a slowdown.

  Read the article

• How you choose your first job as a programmer? [on hold]

  - by sliter

  For Brief I am a recently graduated CS student. I am looking for a job these days, but I have no idea what kind of software development jobs I like(embedded system,web development or else...). And I am looking for your advice. Here is a little more While I was a student, I had an one year internship experience as a system engineer in a semi-conductor company where I wrote Linux driver, tuned system performance, etc.. I was happy about this experience as it allowed me to deepen my understanding of the operating system and different low level things. And I thought "Em, I will continue in the embedded area after I graduate". At the end of my study, I am doing an another internship in web development, both front-end and back-end. And I also enjoys a lot the process of learning new things and making it work (Backbone, Node, socketio, etc..). Now, when I am looking for a software development position, I do not know what to apply! All I know is that I want a job which allows me to keep up with the trends instead of repeating. But besides this, I've no idea what specific type of job I want to do. Turn back to embedded system? Continue with web development? Change to other promising areas(data mining)? All these development positions makes no big difference to me. But I think this is not good and I need some criteria at choosing. So I am looking for advice and I would really appreciate if you can share your experience.

  Read the article

• Crontab file is garbled! HELP!

  - by DNA

  I accidentally deleted my .bashrc file in Ubuntu 11.10. I think I restored it but I have two major issues now: Everything that I type has a red squiggly line under it in this field and the suggestion is a german word. My crontab file is completely garbled and looks like this: \00\00\00\00\00\00\00\00\00\00\00\00\00\008\00\00\00\00\00\008@\00\00\00\00\008@\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00@\00\00\00\00\00\00\00@\00\00\00\00\00tw\00\00\00\00\00\00tw\00\00\00\00\00\00\00\00 \00\00\00\00\00\00\00\00\00\00\00(~\00\00\00\00\00\00(~\00\00\00\00\00(~\00\00\00\00\00\00\00\00\00\00\00H\00\00\00\00\00\00\00\00 \00\00\00\00\00\00\00\00\00\00\00P~\00\00\00\00\00\00P~\00\00\00\00\00P~\00\00\00\00\00\90\00\00\00\00\00\00\90\00\00\00\00\00\00\00\00\00\00 HELP!!!! I am new at Ubuntu and don't know what to do. Please don't tell me to reinstall because I don't know how to. I got this computer from system76 with Ubuntu installed in it.

  Read the article

• Ubuntu 12.10 Quantal Quetzal and AMD 12.11 Beta Driver

  - by White

  I'm using a Quantal AMDx64 install and a XFX Radeon HD5850 video card. I first enabled restricted drivers through additional drivers, but it resulted in breaking Unity and Compiz (I can only see my wallpaper and shortcuts. But the terminal still works and Nautilus too, however, without Close/Maximize/Minimize and slower). Then I uninstalled it and everything went back to normal. Then I installed it via terminal (12.10 version), and the result was the same. Then I downloaded it via ATI's web site (12.11 beta) and installed the .run file using the terminal, but the result was yet again the same. Then I went to the terminal and entered these commands: sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* - It said it had nothing to uninstall sudo rm /ect/x11/xorg.conf - No such directory sudo dpkg-reconfigure xserver-xorg sudo startx sudo cp/ect/x11/xorg.conf.orig /ect/x11/xorg.conf - Also, no such directory sudo aticonfig --initial sudo reboot Then, I was presented with the log in screen, but when I tried to login (with my account), it flashed a black screen and then threw me back. Guest account still works (without unity and compiz, tough) and I can still use TTY. And I also got the "AMD Testing Only" watermark. Then I figured that I should stop messing with the terminal and get help before I unleashed Apocalypse XD. Side notes: My Ubuntu is installed on a ext4 partition with 60GB, and I dual boot with Windows 7 (at least for now). My internet is a 50kbps 3G-ish, so downloading even small files is a pain, let alone a video driver. I would rather not reinstall the O.S., it was a herculean task to download everything I had in there, and I have very little free disk space for backups. I'm still new to Ubuntu (I know some basic commands), and I don't know how to debug, so please, be patient XD And using Windows, my internet is even slower (is that possible?), so it kind of leaves a torture aftertaste xD. So, if you guys could answer quickly, it would be greatly appreciated. Thanks in advance. If you need any info, just ask (and explain how to get it XD).

  Read the article

< Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490  | Next Page >