static vs non static - Page 485

Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

- by Srekel

I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

Read the article

Need help configurating my Tomcat server without any WAR files

- by gablin

I just reinstalled my entire server, and now I can't seem to get my JSP-based website to work on Tomcat anymore. I use the same server.xml file, which worked perfectly before the reinstallation, but no longer. Here's the content of the server.xml file which worked before:  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>        <Host name="www.rebootradio.nu"> <Alias>rebootradio.nu</Alias> <Context path="" docBase="D:/services/http/rebootradio.nu" debug="1" reloadable="true"/> </Host> </Engine> </Service> </Server> The JSP site doesn't use any WAR files or anything like that; there's just a default.jsp in the specified folder D:/services/http/rebootradio.nu which loads the site. As I said, this configuration worked before, but now with the latest verion of XAMPP and Tomcat it doesn't work anymore. All I get is a 404 message saying The requested resource () is not available.

Read the article

Need help configurating my Tomcat server

- by gablin

I just reinstalled my entire server, and now I can't seem to get my JSP-based website to work on Tomcat anymore. I use the same server.xml file, which worked perfectly before the reinstallation, but no longer. Here's the content of the server.xml file which worked before:  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>        <Host name="www.rebootradio.nu"> <Alias>rebootradio.nu</Alias> <Context path="" docBase="D:/services/http/rebootradio.nu" debug="1" reloadable="true"/> </Host> </Engine> </Service> </Server> The JSP site doesn't use any WAR files or anything like that; there's just a default.jsp in the specified folder D:/services/http/rebootradio.nu which loads the site. As I said, this configuration worked before, but now with the latest verion of XAMPP and Tomcat it doesn't work anymore. All I get is a 404 message saying The requested resource () is not available.

Read the article

KB2667402 update fails to install with 0x80004005. Yet it's also showing as installed

- by growse

I've got 15 Windows 2008 R2 x64 servers that I manage with SCCM2012. I've noticed during my Windows updates reporting that there's two boxes that are showing as 'error' for total updates installed. Digging around, it looks like the update that is failing to install is KB2667402. The Software Centre on the server itself shows the following: The software change returned error code 0x80004005(-2147467259). So SCCM thinks it hasn't installed the update. However, if I go to the Programs and Features application and select 'Windows Updates', I can see an entry for KB2667402: If I try and uninstall this, I get an error: An error occurred. Not all of the updates were successfully uninstalled If I try and download the patch from Microsoft directly, I get the same error installing as displayed in Software Centre. The only odd thing about this setup that I can think would affect this is that I run the RDP service on a non-standard port. However, I do this across all the servers, so it seems odd that it would fail on just 2 out of 15. The tail of the WindowsUpdate.log file is below: 2012-06-26 15:33:53:184 3924 1608 COMAPI ------------- 2012-06-26 15:33:53:190 3924 1608 COMAPI -- START -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:190 3924 1608 COMAPI --------- 2012-06-26 15:33:53:190 3924 1608 COMAPI - Allow source prompts: No; Forced: No; Force quiet: Yes 2012-06-26 15:33:53:190 3924 1608 COMAPI - Updates in request: 1 2012-06-26 15:33:53:190 3924 1608 COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:53:199 860 1198 Agent ************* 2012-06-26 15:33:53:199 860 1198 Agent ** START ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:53:199 860 1198 Agent ********* 2012-06-26 15:33:53:199 860 1198 Agent * Updates to install = 1 2012-06-26 15:33:53:201 860 1198 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2667402) 2012-06-26 15:33:53:201 860 1198 Agent * UpdateId = {48859BE4-1331-4CD2-8E70-3B537180A0D0}.103 2012-06-26 15:33:53:201 860 1198 Agent * Bundles 1 updates: 2012-06-26 15:33:53:201 860 1198 Agent * {D854ECF1-99A7-4D67-B435-2D041BF79565}.103 2012-06-26 15:33:53:204 3924 1608 COMAPI - Updates to install = 1 2012-06-26 15:33:53:204 3924 1608 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:221 860 1198 Agent WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point 2012-06-26 15:33:53:222 860 1198 Agent WARNING: LoadLibrary failed for srclient.dll with hr:8007007e 2012-06-26 15:33:53:322 860 1198 DnldMgr Preparing update for install, updateId = {D854ECF1-99A7-4D67-B435-2D041BF79565}.103. 2012-06-26 15:33:53:325 5700 117c Misc =========== Logging initialized (build: 7.5.7601.17514, tz: +0100) =========== 2012-06-26 15:33:53:325 5700 117c Misc = Process: C:\Windows\system32\wuauclt.exe 2012-06-26 15:33:53:325 5700 117c Misc = Module: C:\Windows\system32\wuaueng.dll 2012-06-26 15:33:53:324 5700 117c Handler ::::::::::::: 2012-06-26 15:33:53:325 5700 117c Handler :: START :: Handler: CBS Install 2012-06-26 15:33:53:325 5700 117c Handler ::::::::: 2012-06-26 15:33:53:330 5700 117c Handler Starting install of CBS update D854ECF1-99A7-4D67-B435-2D041BF79565 2012-06-26 15:33:53:342 5700 117c Handler CBS package identity: Package_for_KB2667402~31bf3856ad364e35~amd64~~6.1.2.0 2012-06-26 15:33:53:366 5700 117c Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\windows6.1-kb2667402-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\inst 2012-06-26 15:33:56:270 5700 3b8 Handler FATAL: CBS called Error with 0x80004005, 2012-06-26 15:33:56:402 5700 117c Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x80004005 2012-06-26 15:33:56:405 5700 117c Handler ::::::::: 2012-06-26 15:33:56:406 5700 117c Handler :: END :: Handler: CBS Install 2012-06-26 15:33:56:406 5700 117c Handler ::::::::::::: 2012-06-26 15:33:56:433 860 1198 Agent ********* 2012-06-26 15:33:56:433 860 1198 Agent ** END ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:56:433 860 1198 Agent ************* 2012-06-26 15:33:56:433 860 d14 AU Can not perform non-interactive scan if AU is interactive-only 2012-06-26 15:33:56:450 3924 e40 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:450 3924 e40 COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0) 2012-06-26 15:33:56:450 3924 e40 COMAPI - Reboot required = No 2012-06-26 15:33:56:450 3924 e40 COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022 2012-06-26 15:33:56:451 3924 e40 COMAPI --------- 2012-06-26 15:33:56:451 3924 e40 COMAPI -- END -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:451 3924 e40 COMAPI ------------- 2012-06-26 15:33:56:536 860 13a4 AU Triggering Offline detection (non-interactive) 2012-06-26 15:33:56:536 860 d14 AU ############# 2012-06-26 15:33:56:536 860 d14 AU ## START ## AU: Search for updates 2012-06-26 15:33:56:536 860 d14 AU ######### 2012-06-26 15:33:56:539 860 d14 AU <<## SUBMITTED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:56:539 860 1788 Agent ************* 2012-06-26 15:33:56:539 860 1788 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:56:539 860 1788 Agent ********* 2012-06-26 15:33:56:539 860 1788 Agent * Online = No; Ignore download priority = No 2012-06-26 15:33:56:539 860 1788 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2012-06-26 15:33:56:539 860 1788 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:56:539 860 1788 Agent * Search Scope = {Machine} 2012-06-26 15:33:58:562 860 1788 Agent * Found 0 updates and 70 categories in search; evaluated appl. rules of 180 out of 1072 deployed entities 2012-06-26 15:33:58:565 860 1788 Agent ********* 2012-06-26 15:33:58:565 860 1788 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:58:565 860 1788 Agent ************* 2012-06-26 15:33:58:650 860 f2c AU >>## RESUMED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU # 0 updates detected 2012-06-26 15:33:58:650 860 f2c AU ######### 2012-06-26 15:33:58:650 860 f2c AU ## END ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU ############# 2012-06-26 15:33:58:650 860 f2c AU Featured notifications is disabled. 2012-06-26 15:33:58:651 860 f2c AU Successfully wrote event for AU health state:0 2012-06-26 15:33:58:652 860 f2c AU Successfully wrote event for AU health state:0

Read the article

PhpMyAdmin Hangs On MySQL Error

- by user75228

I'm currently running PhpMyAdmin 4.0.10 (the latest version supporting PHP 4.2.X) on my Amazon EC2 connecting to a MySQL database on RDS. Everything works perfectly fine except actions that return a mysql error message. Whether I perform "any" kind of action that will return a mysql error, Phpmyadmin will hang with the yellow "Loading" box forever without displaying anything. For example, if I perform the following command in MySQL CLI : select * from 123; It instantly returns the following error : ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '123' at line 1 which is completely normal because table 123 doesn't exist. However, if I execute the exact same command in the "SQL" box in Phpmyadmin, after I click "Go" it'll display "Loading" and stops there forever. Has anyone ever encountered this kind of issue with Phpmyadmin? Is this a bug or I have something wrong with my config.inc.php? Any help would be much appreciated. I also noticed these error messages in my apache error logs : /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open Below are my config.inc.php settings : <?php /* vim: set expandtab sw=4 ts=4 sts=4: */ /** * phpMyAdmin sample configuration, you can use it as base for * manual configuration. For easier setup you can use setup/ * * All directives are explained in documentation in the doc/ folder * or at <http://docs.phpmyadmin.net/>. * * @package PhpMyAdmin */ /* * This is needed for cookie based authentication to encrypt password in * cookie */ $cfg['blowfish_secret'] = 'something_random'; /* YOU MUST FILL IN THIS FOR COOKIE AUTH! */ /* * Servers configuration */ $i = 0; /* * First server */ $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'cookie'; /* Server parameters */ $cfg['Servers'][$i]['host'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = true; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['LoginCookieValidity'] = '3600'; /* * phpMyAdmin configuration storage settings. */ /* User used to manipulate with storage */ $cfg['Servers'][$i]['controlhost'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['controluser'] = 'pma'; $cfg['Servers'][$i]['controlpass'] = 'password'; /* Storage database and tables */ $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin'; $cfg['Servers'][$i]['bookmarktable'] = 'pma__bookmark'; $cfg['Servers'][$i]['relation'] = 'pma__relation'; $cfg['Servers'][$i]['table_info'] = 'pma__table_info'; $cfg['Servers'][$i]['table_coords'] = 'pma__table_coords'; $cfg['Servers'][$i]['pdf_pages'] = 'pma__pdf_pages'; $cfg['Servers'][$i]['column_info'] = 'pma__column_info'; $cfg['Servers'][$i]['history'] = 'pma__history'; $cfg['Servers'][$i]['table_uiprefs'] = 'pma__table_uiprefs'; $cfg['Servers'][$i]['tracking'] = 'pma__tracking'; $cfg['Servers'][$i]['designer_coords'] = 'pma__designer_coords'; $cfg['Servers'][$i]['userconfig'] = 'pma__userconfig'; $cfg['Servers'][$i]['recent'] = 'pma__recent'; /* Contrib / Swekey authentication */ // $cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey-pma.conf'; /* * End of servers configuration */ /* * Directories for saving/loading files from server */ $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; /** * Defines whether a user should be displayed a "show all (records)" * button in browse mode or not. * default = false */ //$cfg['ShowAll'] = true; /** * Number of rows displayed when browsing a result set. If the result * set contains more rows, "Previous" and "Next". * default = 30 */ $cfg['MaxRows'] = 50; /** * disallow editing of binary fields * valid values are: * false allow editing * 'blob' allow editing except for BLOB fields * 'noblob' disallow editing except for BLOB fields * 'all' disallow editing * default = blob */ //$cfg['ProtectBinary'] = 'false'; /** * Default language to use, if not browser-defined or user-defined * (you find all languages in the locale folder) * uncomment the desired line: * default = 'en' */ //$cfg['DefaultLang'] = 'en'; //$cfg['DefaultLang'] = 'de'; /** * default display direction (horizontal|vertical|horizontalflipped) */ //$cfg['DefaultDisplay'] = 'vertical'; /** * How many columns should be used for table display of a database? * (a value larger than 1 results in some information being hidden) * default = 1 */ //$cfg['PropertiesNumColumns'] = 2; /** * Set to true if you want DB-based query history.If false, this utilizes * JS-routines to display query history (lost by window close) * * This requires configuration storage enabled, see above. * default = false */ //$cfg['QueryHistoryDB'] = true; /** * When using DB-based query history, how many entries should be kept? * * default = 25 */ //$cfg['QueryHistoryMax'] = 100; /* * You can find more configuration options in the documentation * in the doc/ folder or at <http://docs.phpmyadmin.net/>. */ ?>

Read the article

Why does my ping command (Windows) results alternate between "timeout" and "network is not reachable"?

- by Sopalajo de Arrierez

My Windows is in Spanish, so I will have to paste console outputs in that language (I think that translating without knowing the exact terms used in english versions could give worse results than leaving it as it appears on screen). This is the issue: when pinging a non-existent IP from a WinXP-SP3 machine (clean Windows install, just formatted), I get sometimes a "Timeout" result, and sometimes a "network is not reachable" message. This is the result of: ping 192.168.210.1 Haciendo ping a 192.168.210.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 192.168.210.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms 192.168.210.1 does not exist on the network. DHCP client is enabled, and the computer gets assigned those network config by the router. My IP: 192.168.11.2 Netmask: 255.255.255.0 Gateway: 192.168.11.1 DNS: 80.58.0.33/194.224.52.36 This is the output from "route print command": =========================================================================== Rutas activas: Destino de red Máscara de red Puerta de acceso Interfaz Métrica 0.0.0.0 0.0.0.0 192.168.11.1 192.168.11.2 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.11.0 255.255.255.0 192.168.11.2 192.168.11.2 20 192.168.11.2 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.11.255 255.255.255.255 192.168.11.2 192.168.11.2 20 224.0.0.0 240.0.0.0 192.168.11.2 192.168.11.2 20 255.255.255.255 255.255.255.255 192.168.11.2 192.168.11.2 1 255.255.255.255 255.255.255.255 192.168.11.2 3 1 Puerta de enlace predeterminada: 192.168.11.1 =========================================================================== Rutas persistentes: ninguno The output of: ping 1.1.1.1 Haciendo ping a 1.1.1.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 1.1.1.1: Paquetes: enviados = 4, recibidos = 0, perdidos = 4 1.1.1.1 does not exist on the network. and the output of: ping 10.1.1.1 Haciendo ping a 10.1.1.1 con 32 bytes de datos: Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Estadísticas de ping para 10.1.1.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), 10.1.1.1 does not exist on the network. I can do some aproximate translation of what you demand if necessary. I have another computers in the same network (WinXP-SP3 and Win7-SP1), and they have, too, this problem. Gateway (Router): Buffalo WHR-HP-GN (official Buffalo firmware, not DD-WRT). I have some Linux (Debian/Kali) machine in my network, so I tested things on it: ping 192.168.210.1 PING 192.168.210.1 (192.168.210.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=1 Packet filtered From 80.58.67.86 icmp_seq=2 Packet filtered From 80.58.67.86 icmp_seq=3 Packet filtered From 80.58.67.86 icmp_seq=4 Packet filtered to the non-existing 1.1.1.1 : ping 1.1.1.1 PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. ^C --- 1.1.1.1 ping statistics --- 153 packets transmitted, 0 received, 100% packet loss, time 153215ms (no response after waiting a few minutes). and the non-existing 10.1.1.1: ping 10.1.1.1 PING 10.1.1.1 (10.1.1.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=20 Packet filtered From 80.58.67.86 icmp_seq=22 Packet filtered From 80.58.67.86 icmp_seq=23 Packet filtered From 80.58.67.86 icmp_seq=24 Packet filtered From 80.58.67.86 icmp_seq=25 Packet filtered What is going on here? I am posing this question mainly for learning purposes, but there is another reason: when all pings are returning "timeout", it creates an %ERRORLEVEL% value of 1, but if there is someone of "Network is not reachable" type, %ERRORLEVEL% goes to 0 (no error), and this could be inappropriate for a shell script (we can not use ping to detect, for example, if the network is down due to loss of contact with the gateway).

Read the article

wso2 ESB: server configuration CRITICAL

- by nuvio

My Scenario: I have server_1 (192.168.10.1) with wso2-ESB and server_2 (192.168.10.2) with Glassfish-v3 + web services. Problem: I am trying to create a proxy in ESB using the java Web Services, but the created proxy does not respond properly. The log says: Unable to sendViaPost for http or https does not change the result. I think I should configure the axis2.xml but I am having trouble, and don't know what to do. What is the configuration for my scenario? Please help me! EDIT: To be clear, I can directly consume the WebService in the Glassfish server, it works normal, both port and url are accessible. Only when I create a "Pass through Proxy" in the ESB, it does not work. I don't think is matter of Proxy configuration...I never had problems while deployed locally, problems started once I have uploaded the ESB to a remote server. I really would need someone to point me what is the correct procedure when installing the ESB on a remote host: configuration of axis2.xml and carbon.xml, ports, transport receivers etc... P.S. I had a look at the official (wso2 esb and carbon) guides with no luck, but I am missing something... Endpoint of Java Web Service: http://192.168.10.2:8080/HelloWorld/Hello?wsdl ESB Proxy Enpoint: http://192.168.10.1:8280/services/HelloProxy The following is my axis2.xml configuration, please check it: <transportReceiver name="http" class="org.apache.synapse.transport.nhttp.HttpCoreNIOListener"> <parameter name="port" locked="false">8280</parameter> <parameter name="non-blocking" locked="false">true</parameter> <parameter name="bind-address" locked="false">192.168.10.1</parameter> <parameter name="WSDLEPRPrefix" locked="false">https//192.168.10.1:8280</parameter> <parameter name="httpGetProcessor" locked="false">org.wso2.carbon.transport.nhttp.api.NHttpGetProcessor</parameter>  </transportReceiver>  <transportReceiver name="https" class="org.apache.synapse.transport.nhttp.HttpCoreNIOSSLListener"> <parameter name="port" locked="false">8243</parameter> <parameter name="non-blocking" locked="false">true</parameter> <parameter name="bind-address" locked="false">192.168.10.1</parameter> <parameter name="WSDLEPRPrefix" locked="false">https://192.168.10.1:8243</parameter>  <parameter name="httpGetProcessor" locked="false">org.wso2.carbon.transport.nhttp.api.NHttpGetProcessor</parameter> <parameter name="keystore" locked="false"> <KeyStore> <Location>repository/resources/security/wso2carbon.jks</Location> <Type>JKS</Type> <Password>wso2carbon</Password> <KeyPassword>wso2carbon</KeyPassword> </KeyStore> </parameter> <parameter name="truststore" locked="false"> <TrustStore> <Location>repository/resources/security/client-truststore.jks</Location> <Type>JKS</Type> <Password>wso2carbon</Password> </TrustStore> </parameter>  </transportReceiver>

Read the article

Const references when dereferencing iterator on set, starting from Visual Studio 2010

- by Patrick

Starting from Visual Studio 2010, iterating over a set seems to return an iterator that dereferences the data as 'const data' instead of non-const. The following code is an example of something that does compile on Visual Studio 2005, but not on 2010 (this is an artificial example, but clearly illustrates the problem we found on our own code). In this example, I have a class that stores a position together with a temperature. I define comparison operators (not all them, just enough to illustrate the problem) that only use the position, not the temperature. The point is that for me two instances are identical if the position is identical; I don't care about the temperature. #include <set> class DataPoint { public: DataPoint (int x, int y) : m_x(x), m_y(y), m_temperature(0) {} void setTemperature(double t) {m_temperature = t;} bool operator<(const DataPoint& rhs) const { if (m_x==rhs.m_x) return m_y<rhs.m_y; else return m_x<rhs.m_x; } bool operator==(const DataPoint& rhs) const { if (m_x!=rhs.m_x) return false; if (m_y!=rhs.m_y) return false; return true; } private: int m_x; int m_y; double m_temperature; }; typedef std::set<DataPoint> DataPointCollection; void main(void) { DataPointCollection points; points.insert (DataPoint(1,1)); points.insert (DataPoint(1,1)); points.insert (DataPoint(1,2)); points.insert (DataPoint(1,3)); points.insert (DataPoint(1,1)); for (DataPointCollection::iterator it=points.begin();it!=points.end();++it) { DataPoint &point = *it; point.setTemperature(10); } } In the main routine I have a set to which I add some points. To check the correctness of the comparison operator, I add data points with the same position multiple times. When writing the contents of the set, I can clearly see there are only 3 points in the set. The for-loop loops over the set, and sets the temperature. Logically this is allowed, since the temperature is not used in the comparison operators. This code compiles correctly in Visual Studio 2005, but gives compilation errors in Visual Studio 2010 on the following line (in the for-loop): DataPoint &point = *it; The error given is that it can't assign a "const DataPoint" to a [non-const] "DataPoint &". It seems that you have no decent (= non-dirty) way of writing this code in VS2010 if you have a comparison operator that only compares parts of the data members. Possible solutions are: Adding a const-cast to the line where it gives an error Making temperature mutable and making setTemperature a const method But to me both solutions seem rather 'dirty'. It looks like the C++ standards committee overlooked this situation. Or not? What are clean solutions to solve this problem? Did some of you encounter this same problem and how did you solve it? Patrick

Read the article

How to eliminate NULL fields in TSQL

- by salvationishere

I am developing a TSQL query in SSMS 2008 R2. I am trying to develop this query to identify one record / client. Because some of these values are NULL, I am currently doing LEFT JOINS on most of the tables. But the problem with the LEFT JOINs is that now I get 1 record for some clients. But if I change this to INNER JOINs then some clients are excluded entirely because they have NULL values for these columns. How do I limit the query result to just one record / client regardless of NULL values? And if there are non-NULL values then I want it to choose the record with non-NULL values. Here is some of my current output: group_profile_id profile_name license_number is_accepting is_accepting_placement managing_office region vendor_name vendor_id applicant_type Office Address status_description Cert Date2 race ethnicity_desc religion 9CD932F1-6BE1-4F80-AB81-0CE32C565BCF Atreides Foster Home 1 Atreides1 1 Yes Manchester, NH Gulf Atlantic Atreides1 00000007 Treatment Foster Home 4042 Arrakis Avenue, Springfield, VT 05156 Open/Re-opened 2011-06-01 00:00:00.000 NULL NULL NULL DCE354D5-A7CC-409F-B5A3-89BF664B7718 Averitte, Leon and Sandra 00000044 1 Yes Birmingham, AL Gulf Atlantic AL Averitte, Leon and Sandra 00000044 Treatment Foster Home 3816 5th Avenue, Bessemer, AL 35020, (205)482-4307 Open/Re-opened 2011-08-05 00:00:00.000 NULL NULL NULL DCE354D5-A7CC-409F-B5A3-89BF664B7718 Averitte, Leon and Sandra 00000044 1 Yes Birmingham, AL Gulf Atlantic AL Averitte, Leon and Sandra 00000044 Treatment Foster Home 3816 5th Avenue, Bessemer, AL 35020, (205)482-4307 Open/Re-opened 2011-08-05 00:00:00.000 Caucasian/White Non Hispanic NULL AD02A43C-6F38-4F35-8C9E-E12422690BFB Bass, Matthew and Sarah 00000076 1 Yes Jacks on, MS Central Gulf Coast MS Bass, Matthew and Sarah 00000076 Treatment Foster Home 506 Eagelwood Drive, Florence, MS 39073, (601)665-7169 Open/Re-opened 2011-04-01 00:00:00.000 NULL NULL NULL AD02A43C-6F38-4F35-8C9E-E12422690BFB Bass, Matthew and Sarah 00000076 1 Yes Jackson, MS Central Gulf Coast MS Bass, Matthew and Sarah 00000076 Treatment Foster Home 506 Eagelwood Drive, Florence, MS 39073, (601)665-7169 Open/Re-opened 2011-04-01 00:00:00.000 Caucasian/White NULL Baptist You can see that both Averitte and Bass profile names have one record with NULL race, ethnicity, religion. How do I eliminate these rows (rows 2 and 4)? Here is my query currently: select distinct gp.group_profile_id, gp.profile_name, gp.license_number, gp.is_accepting, case when gp.is_accepting = 1 then 'Yes' when gp.is_accepting = 0 then 'No ' end as is_accepting_placement, mo.profile_name as managing_office, regions.[region_description] as region, pv.vendor_name, pv.id as vendor_id, at.description as applicant_type, dbo.GetGroupAddress(gp.group_profile_id, null, 0) as [Office Address], gsv.status_description, ri.[description] as race, ethnicity.description as ethnicity_desc, religion.description as religion from group_profile gp With (NoLock) --Office Information inner join group_profile_type gpt With (NoLock) on gp.group_profile_type_id = gpt.group_profile_type_id and gpt.type_code = 'FOSTERHOME' and gp.agency_id = @agency_id and gp.is_deleted = 0 inner join group_profile mo With (NoLock) on gp.managing_office_id = mo.group_profile_id left outer join payor_vendor pv With (NoLock) on gp.payor_vendor_id = pv.payor_vendor_id left outer join applicant_type at With (NoLock) on gp.applicant_type_id = at.applicant_type_id and at.is_foster_home = 1 inner join group_status_view gsv With (NoLock) on gp.group_profile_id = gsv.group_profile_id and gsv.status_value = 'OPEN' and gsv.effective_date = (Select max(b.effective_date) from group_status_view b With (NoLock) where gp.group_profile_id = b.group_profile_id) left outer join regions With (NoLock) on isnull(mo.regions_id, gp.regions_id) = regions.regions_id left join enrollment en on en.group_profile_id = gp.group_profile_id join event_log el on el.event_log_id = en.event_log_id left join people client on client.people_id = el.people_id left join race With (NoLock) on el.people_id = race.people_id left join group_profile_race gpr with (nolock) on gpr.race_info_id = race.race_info_id left join race_info ri with (nolock) on ri.race_info_id = gpr.race_info_id left join ethnicity With(NoLock) On client.ethnicity = ethnicity.ethnicity_id left join religion on client.religion = religion.religion_id

Read the article

jQuery fadeIn and fadeOut buggy on hover of image

- by user186319

Hi All, I have four images on a page that on hover, needs to replace the main text with relevant text pertaining to that image. It's working but buggy. If I roll over slowly and roll off slowly, I get the desired effect. When I rollover quickly both div's content show. Here is a thinned out version of what I need to be able to do. <img src="btn-open.gif" class="btn" /> <div class="mainText"> <h1>Main text</h1> <p>Morbi mollis auctor magna, eu sodales mi posuere elementum. Donec lacus lorem, vestibulum sed luctus ac, tincidunt sit amet eros. Nullam tristique lectus lobortis nibh pharetra placerat. Aliquam quis tellus mauris. Quisque eu convallis elit. Sed vitae libero est. Suspendisse laoreet magna magna, vitae malesuada diam. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Fusce eros ipsum, interdum et volutpat sed, commodo aliquam odio. Maecenas auctor condimentum mi. Maecenas ante eros, tristique nec viverra sed, molestie sit amet nulla. Suspendisse vitae turpis ac felis rutrum interdum.</p> </div> <div class="replacementText"> <h1>Replacement text</h1> <p>Nulla ac magna nec quam cursus mollis eget a nulla! Vestibulum quis nibh ipsum, ut vehicula leo. Etiam ac felis suscipit mi semper vehicula. Praesent est mi, suscipit sit amet bibendum at, porta quis elit. Integer lectus est, consequat non sodales ac, pharetra sit amet tellus. Suspendisse porttitor massa a dolor suscipit sed ullamcorper ipsum vehicula. In malesuada augue sit amet ante volutpat euismod. Ut vel felis sed enim placerat ultricies. Aliquam erat volutpat. Vivamus rutrum; ante vitae euismod accumsan, felis odio lacinia magna, eu viverra nisl metus non ligula? In metus nisi, viverra vel scelerisque non, ullamcorper sed arcu? In hac habitasse platea dictumst. Donec laoreet dapibus quam vitae pulvinar. Morbi ut purus nisl. Nulla eu velit ipsum; vel mattis magna. Aenean sodales faucibus dapibus.</p> </div> $(document).ready(function() { $(".btn").hover( function() { $(this).css({ cursor: "pointer" }); $(".mainText").hide(); $(".replacementText").slideDown("slow"); }, function() { $(".replacementText").hide(); $(".mainText").slideDown("slow"); }); });

Read the article

How to develop an english .com domain value rating algorithm?

- by Tom

I've been thinking about an algorithm that should rougly be able to guess the value of an english .com domain in most cases. For this to work I want to perform tests that consider the strengths and weaknesses of an english .com domain. A simple point based system is what I had in mind, where each domain property can be given a certain weight to factor it's importance in. I had these properties in mind: domain character length Eg. initially 20 points are added. If the domain has 4 or less characters, no points are substracted. For each extra character, one or more points are substracted on an exponential basis (the more characters, the higher the penalty). domain characters Eg. initially 20 points are added. If the domain is only alphabetic, no points are substracted. For each non-alhabetic character, X points are substracted (exponential increase again). domain name words Scans through a big offline english database, including non-formal speech, eg. words like "tweet" should be recognized. Question 1 : where can I get a modern list of english words for use in such application? Are these lists available for free? Are there lists like these with non-formal words? The more words are found per character, the more points are added. So, a domain with a lot of characters will still not get a lot of points. words hype-level I believe this is a tricky one, but this should be the cause to differentiate perfect but boring domains from perfect and interesting domains. For example, the following domain is probably not that valueable: www.peanutgalaxy.com The algorithm should identify that peanuts and galaxies are not very popular topics on the web. This is just an example. On the other side, a domain like www.shopdeals.com should ring a bell to the hype test, as shops and deals are quite popular on the web. My initial thought would be to see how often these keywords are references to on the web, preferably with some database. Question 2: is this logic flawed, or does this hype level test have merit? Question 3: are such "hype databases" available? Or is there anything else that could work offline? The problem with eg. a query to google is that it requires a lot of requests due to the many domains to be tested. domain name spelling mistakes Domains like "freemoneyz.com" etc. are generally (notice I am making a lot of assumptions in this post but that's necessary I believe) not valueable due to the spelling mistakes. Question 4: are there any offline APIs available to check for spelling mistakes, preferably in javascript or some database that I can use interact with myself. Or should a word list help here as well? use of consonants, vowels etc. A domain that is easy to pronounce (eg. Google) is usually much more valueable than one that is not (eg. Gkyld). Question 5: how does one test for such pronuncability? Do you check for consonants, vowels, etc.? What does a valueable domain have? Has there been any work in this field, where should I look? That is what I came up with, which leads me to my final two questions. Question 6: can you think of any more english .com domain strengths or weaknesses? Which? How would you implement these? Question 7: do you believe this idea has any merit or all, or am I too naive? Anything I should know, read or hear about? Suggestions/comments? Thanks!

Read the article

Change columns order in bootstrap 3

- by TNK

I am trying to change bootstrap columns order in desktop and mobile screen. <div class="container"> <div class="row"> <section class="content-secondary col-sm-4"> <h4>Don't Miss!</h4> <p>Suspendisse et arcu felis, ac gravida turpis. Suspendisse potenti. Ut porta rhoncus ligula, sed fringilla felis feugiat eget. In non purus quis elit iaculis tincidunt. Donec at ultrices est.</p> <p><a class="btn btn-primary pull-right" href="#">Read more <span class="icon fa fa-arrow-circle-right"></span></a></p> <h4>Check it out</h4> <p>Suspendisse et arcu felis, ac gravida turpis. Suspendisse potenti. Ut porta rhoncus ligula, sed fringilla felis feugiat eget. In non purus quis elit iaculis tincidunt. Donec at ultrices est.</p> <p><a class="btn btn-primary pull-right" href="#">Read more <span class="icon fa fa-arrow-circle-right"></span></a></p> <h4>Finally</h4> <p>Suspendisse et arcu felis, ac gravida turpis. Suspendisse potenti. Ut porta rhoncus ligula, sed fringilla felis feugiat eget. In non purus quis elit iaculis tincidunt. Donec at ultrices est.</p> <p><a class="btn btn-primary pull-right" href="#">Read more <span class="icon fa fa-arrow-circle-right"></span></a></p> </section> <section class="content-primary col-sm-8"> <div class="main-content" ........... ........... </div> </section> </div> </div> View Port = SM columns order should be : |content- secondary | content-primary | View Port < SM columns order should be : | content-primary | |content- secondary | I tried it something like this using 'pulland 'push clases. <div class="row"> <section class="content-secondary col-sm-4 col-sm-push-4"> Content ...... </section> <section class="content-primary col-sm-8 col-sm-pull-8"> Content ...... </section> </div> But this is not working for me. Hope someone will help me out. Thank you.

Read the article

How to set MinWorkingSet and MaxWorkingSet in a 64-bit .NET process?

- by Gravitas

How do I set MinWorkingSet and MaxWorking set for a 64-bit .NET process? p.s. I can set the MinWorkingSet and MaxWorking set for a 32-bit process, as follows: [DllImport("KERNEL32.DLL", EntryPoint = "SetProcessWorkingSetSize", SetLastError = true, CallingConvention = CallingConvention.StdCall)] internal static extern bool SetProcessWorkingSetSize(IntPtr pProcess, int dwMinimumWorkingSetSize, int dwMaximumWorkingSetSize); [DllImport("KERNEL32.DLL", EntryPoint = "GetCurrentProcess", SetLastError = true, CallingConvention = CallingConvention.StdCall)] internal static extern IntPtr MyGetCurrentProcess(); // In main(): SetProcessWorkingSetSize(Process.GetCurrentProcess().Handle, int.MaxValue, int.MaxValue); Update: Unfortunately, even if we do this call, the garbage collection trims the working set down anyway, bypassing MinWorkingSet (see "Automatic GC.Collect() in the diagram below). Question: Is there a way to lock the WorkingSet (the green line) to 1GB, to avoid the spike in page faults (the red lines) that occur when allocating new memory into the process? p.s. Every time a page fault occurs, it blocks the thread for 250us, which hits application performance badly.

Read the article

checkbox unchecked when i scroll listview in android

- by Mathew

I am new to android development. I created a listview with textbox and checkbox. When I check the checkbox and scroll it down to check some other items in the list view, the older ones are unchecked. How to avoid this problem in listview? Please guide me with my code. Here is the code: main.xml: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:id="@+id/TextView01" android:layout_height="wrap_content" android:text="List of items" android:textStyle="normal|bold" android:gravity="center_vertical|center_horizontal" android:layout_width="fill_parent"></TextView> <ListView android:id="@+id/ListView01" android:layout_height="250px" android:layout_width="fill_parent"> </ListView> <Button android:text="Save" android:id="@+id/btnSave" android:layout_width="wrap_content" android:layout_height="wrap_content"> </Button> </LinearLayout> This is the xml page I used to create dynamic list row: listview.xml: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_height="wrap_content" android:gravity="left|center" android:layout_width="wrap_content" android:paddingBottom="5px" android:paddingTop="5px" android:paddingLeft="5px"> <TextView android:id="@+id/TextView01" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center" android:textColor="#FFFF00" android:text="hi"></TextView> <TextView android:text="hello" android:id="@+id/TextView02" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginLeft="10px" android:textColor="#0099CC"></TextView> <EditText android:id="@+id/txtbox" android:layout_width="120px" android:layout_height="wrap_content" android:textSize="12sp" android:layout_x="211px" android:layout_y="13px"> </EditText> <CheckBox android:id="@+id/chkbox1" android:layout_width="wrap_content" android:layout_height="wrap_content" /> </LinearLayout> This is my activity class. CustomListViewActivity.java: package com.listivew; import android.app.Activity; import android.os.Bundle; import android.content.Context; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.widget.BaseAdapter; import android.widget.Button; import android.widget.CheckBox; import android.widget.EditText; import android.widget.ListView; import android.widget.TextView; import android.widget.Toast; public class CustomListViewActivity extends Activity { ListView lstView; static Context mContext; Button btnSave; private static class EfficientAdapter extends BaseAdapter { private LayoutInflater mInflater; public EfficientAdapter(Context context) { mInflater = LayoutInflater.from(context); } public int getCount() { return country.length; } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { final ViewHolder holder; if (convertView == null) { convertView = mInflater.inflate(R.layout.listview, parent, false); holder = new ViewHolder(); holder.text = (TextView) convertView .findViewById(R.id.TextView01); holder.text2 = (TextView) convertView .findViewById(R.id.TextView02); holder.txt = (EditText) convertView.findViewById(R.id.txtbox); holder.cbox = (CheckBox) convertView.findViewById(R.id.chkbox1); convertView.setTag(holder); } else { holder = (ViewHolder) convertView.getTag(); } holder.text.setText(curr[position]); holder.text2.setText(country[position]); holder.txt.setText(""); holder.cbox.setChecked(false); return convertView; } public class ViewHolder { TextView text; TextView text2; EditText txt; CheckBox cbox; } } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); lstView = (ListView) findViewById(R.id.ListView01); lstView.setAdapter(new EfficientAdapter(this)); btnSave = (Button)findViewById(R.id.btnSave); mContext = this; btnSave.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { // I want to print the text which is in the listview one by one. //Later i will insert it in the database // Toast.makeText(getBaseContext(), "EditText Value, checkbox value and other values", Toast.LENGTH_SHORT).show(); for (int i = 0; i < lstView.getCount(); i++) { View listOrderView; listOrderView = lstView.getChildAt(i); try{ EditText txtAmt = (EditText)listOrderView.findViewById(R.id.txtbox); CheckBox cbValue = (CheckBox)listOrderView.findViewById(R.id.chkbox1); if(cbValue.isChecked()== true){ String amt = txtAmt.getText().toString(); Toast.makeText(getBaseContext(), "Amount is :"+amt, Toast.LENGTH_SHORT).show(); } }catch (Exception e) { // TODO: handle exception } } } }); } private static final String[] country = { "item1", "item2", "item3", "item4", "item5", "item6","item7", "item8", "item9", "item10", "item11", "item12" }; private static final String[] curr = { "1", "2", "3", "4", "5", "6","7", "8", "9", "10", "11", "12" }; } Please help me to slove this problem. I have referred in many places. But I could not get proper answer to solve this problem. Please provide me the code to avoid unchecking the checkbox while scrolling up and down. Thank you.

Read the article

Merging dictionaries in C#

- by orip

What's the best way to merge 2 or more dictionaries (Dictionary<T1,T2>) in C#? (3.0 features like LINQ are fine). I'm thinking of a method signature along the lines of: public static Dictionary<TKey,TValue> Merge<TKey,TValue>(Dictionary<TKey,TValue>[] dictionaries); or public static Dictionary<TKey,TValue> Merge<TKey,TValue>(IEnumerable<Dictionary<TKey,TValue>> dictionaries); EDIT: Got a cool solution from JaredPar and Jon Skeet, but I was thinking of something that handles duplicate keys. In case of collision, it doesn't matter which value is saved to the dict as long as it's consistent.

Read the article

Processing Email in Outlook

- by Daniel Moth

A. Why Goal 1 = Help others: Have at most a 24-hour response turnaround to internal (from colleague) emails, typically achieving same day response. Goal 2 = Help projects: Not to implicitly pass/miss an opportunity to have impact on electronic discussions around any project on the radar. Not achieving goals 1 & 2 = Colleagues stop relying on you, drop you off conversations, don't see you as a contributing resource or someone that cares, you are perceived as someone with no peripheral vision. Note this is perfect if all you are doing is cruising at your job, trying to fly under the radar, with no ambitions of having impact beyond your absolute minimum 'day job'. B. DON'T: Leave unread email lurking around Don't: Receive or process all incoming emails in a single folder ('inbox' or 'unread mail'). This is actually possible if you receive a small number of emails (e.g. new to the job, not working at a company like Microsoft). Even so, with (your future) success at any level (company, community) comes large incoming email, so learn to deal with it. With large volumes, it is best to let the system help you by doing some categorization and filtering on your behalf (instead of trying to do that in your head as you process the single folder). See later section on how to achieve this. Don't: Leave emails as 'unread' (or worse: read them, then mark them as unread). Often done by individuals who think they possess super powers ("I can mentally cache and distinguish between the emails I chose not to read, the ones that are actually new, and the ones I decided to revisit in the future; the fact that they all show up the same (bold = unread) does not confuse me"). Interactions with this super-powered individuals typically end up with them saying stuff like "I must have missed that email you are talking about (from 2 weeks ago)" or "I am a bit behind, so I haven't read your email, can you remind me". TIP: The only place where you are "allowed" unread email is in your Deleted Items folder. Don't: Interpret a read email as an email that has been processed. Doing that, means you will always end up with fake unread email (that you have actually read, but haven't dealt with completely so you then marked it as unread) lurking between actual unread email. Another side effect is reading the email and making a 'mental' note to action it, then leaving the email as read, so the only thing left to remind you to carry out the action is… you. You are not super human, you will forget. This is a key distinction. Reading (or even scanning) a new email, means you now know what needs to be done with it, in order for it to be truly considered processed. Truly processing an email is to, for example, write an email of your own (e.g. to reply or forward), or take a non-email related action (e.g. create calendar entry, do something on some website), or read it carefully to gain some knowledge (e.g. it had a spec as an attachment), or keep it around as reference etc. 'Reading' means that you know what to do, not that you have done it. An email that is read is an email that is triaged, not an email that is resolved. Sometimes the thing that needs to be done based on receiving the email, you can (and want) to do immediately after reading the email. That is fine, you read the email and you processed it (typically when it takes no longer than X minutes, where X is your personal tolerance – mine is roughly 2 minutes). Other times, you decide that you don't want to spend X minutes at that moment, so after reading the email you need a quick system for "marking" the email as to be processed later (and you still leave it as 'read' in outlook). See later section for how. C. DO: Use Outlook rules and have multiple folders where incoming email is automatically moved to Outlook email rules are very powerful and easy to configure. Use them to automatically file email into folders. Here are mine (note that if a rule catches an email message then no further rules get processed): "personal" Email is either personal or business related. Almost all personal email goes to my gmail account. The personal emails that end up on my work email account, go to a dedicated folder – that is achieved via a rule that looks at the email's 'From' field. For those that slip through, I use the new Outlook 2010 quick step of "Conversation To Folder" feature to let the slippage only occur once per conversation, and then update my rules. "External" and "ViaBlog" The remaining external emails either come from my blog (rule on the subject line) or are unsolicited (rule on the domain name not being microsoft) and they are filed accordingly. "invites" I may do a separate blog post on calendar management, but suffice to say it should be kept up to date. All invite requests end up in this folder, so that even if mail gets out of control, the calendar can stay under control (only 1 folder to check). I.e. so I can let the organizer know why I won't be attending their meeting (or that I will be). Note: This folder is the only one that shows the total number of items in it, instead of the total unread. "Inbox" The only email that ends up here is email sent TO me and me only. Note that this is also the only email that shows up above the systray icon in the notification toast – all other emails cannot interrupt. "ToMe++" Email where I am on the TO line, but there are other recipients as well (on the TO or CC line). "CC" Email where I am on the CC line. I need to read these, but nobody is expecting a response or action from me so they are not as urgent (and if they are and follow up with me, they'll receive a link to this). "@ XYZ" Emails to aliases that are about projects that I directly work on (and I wasn't on the TO or CC line, of course). Test: these projects are in my commitments that I get measured on at the end of the year. "Z Mass" and subfolders under it per distribution list (DL) Emails to aliases that are about topics that I am interested in, but not that I formally own/contribute to. Test: if I unsubscribed from these aliases, nobody could rightfully complain. "Admin" folder, which resides under "Z Mass" folder Emails to aliases that I was added typically by an admin, e.g. broad emails to the floor/group/org/building/division/company that I am a member of. "BCC" folder, which resides under "Z Mass" Emails where I was not on the TO or the CC line explicitly and the alias it was sent to is not one I explicitly subscribed to (or I have been added to the BCC line, which I briefly touched on in another post). When there are only a few quick minutes to catch up on email, read as much as possible from these folders, in this order: Invites, Inbox, ToMe++. Only when these folders are all read (remember that doesn't mean that each email in them has been fully dealt with), we can move on to the @XYZ and then the CC folders. Only when those are read we can go on to the remaining folders. Note that the typical flow in the "Z Mass" subfolders is to scan subject lines and use the new Ctrl+Delete Outlook 2010 feature to ignore conversations. D. DO: Use Outlook Search folders in combination with categories As you process each folder, when you open a new email (i.e. click on it and read it in the preview pane) the email becomes read and stays read and you have to decide whether: It can take 2 minutes to deal with for good, right now, or It will take longer than 2 minutes, so it needs to be postponed with a clear next step, which is one of ToReply – there may be intermediate action steps, but ultimately someone else needs to receive email about this Action – no email is required, but I need to do something ReadLater – no email is required from the quick scan, but this is too long to fully read now, so it needs to be read it later WaitingFor – the email is informing of an intermediate status and 'promising' a future email update. Need to track. SomedayMaybe – interesting but not important, non-urgent, non-time-bound information. I may want to spend part of one of my weekends reading it. For all these 'next steps' use Outlook categories (right click on the email and assign category, or use shortcut key). Note that I also use category 'WaitingFor' for email that I send where I am expecting a response and need to track it. Create a new search folder for each category (I dragged the search folders into my favorites at the top left of Outlook, above my inboxes). So after the activity of reading/triaging email in the normal folders (where the email arrived) is done, the result is a bunch of emails appearing in the search folders (configure them to show the total items, not the total unread items). To actually process email (that takes more than 2 minutes to deal with) process the search folders, starting with ToReply and Action. E. DO: Get into a Routine Now you have a system in place, get into a routine of using it. Here is how I personally use mine, but this part I keep tweaking: Spend short bursts of time (between meetings, during boring but mandatory meetings and, in general, 2-4 times a day) aiming to have no unread emails (and in the process deal with some emails that take less than 2 minutes). Spend around 30 minutes at the end of each day processing most urgent items in search folders. Spend as long as it takes each Friday (or even the weekend) ensuring there is no unnecessary email baggage carried forward to the following week. F. Other resources Official Outlook help on: Create custom actions rules, Manage e-mail messages with rules, creating a search folder. Video on ignoring conversations (Ctrl+Del). Official blog post on Quick Steps and in particular the Move Conversation to folder. If you've read "Getting Things Done" it is very obvious that my approach to email management is driven by GTD. A very similar approach was described previously by ScottHa (also influenced by GTD), worth reading here. He also described how he sets up 2 outlook rules ('invites' and 'external') which I also use – worth reading that too. Comments about this post welcome at the original blog.

Read the article

SQL SERVER – Server Side Paging in SQL Server 2011 – A Better Alternative

- by pinaldave

Ranking has improvement considerably from SQL Server 2000 to SQL Server 2005/2008 to SQL Server 2011. Here is the blog article where I wrote about SQL Server 2005/2008 paging method SQL SERVER – 2005 T-SQL Paging Query Technique Comparison (OVER and ROW_NUMBER()) – CTE vs. Derived Table. One can achieve this using OVER clause and ROW_NUMBER() function. Now SQL Server 2011 has come up with the new Syntax for paging. Here is how one can easily achieve it. USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO I consider it good enhancement in terms of T-SQL. I am sure many developers are waiting for this feature for long time. We will consider performance different in future posts. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Processing Email in Outlook

- by Daniel Moth

A. Why Goal 1 = Help others: Have at most a 24-hour response turnaround to internal (from colleague) emails, typically achieving same day response. Goal 2 = Help projects: Not to implicitly pass/miss an opportunity to have impact on electronic discussions around any project on the radar. Not achieving goals 1 & 2 = Colleagues stop relying on you, drop you off conversations, don't see you as a contributing resource or someone that cares, you are perceived as someone with no peripheral vision. Note this is perfect if all you are doing is cruising at your job, trying to fly under the radar, with no ambitions of having impact beyond your absolute minimum 'day job'. B. DON'T: Leave unread email lurking around Don't: Receive or process all incoming emails in a single folder ('inbox' or 'unread mail'). This is actually possible if you receive a small number of emails (e.g. new to the job, not working at a company like Microsoft). Even so, with (your future) success at any level (company, community) comes large incoming email, so learn to deal with it. With large volumes, it is best to let the system help you by doing some categorization and filtering on your behalf (instead of trying to do that in your head as you process the single folder). See later section on how to achieve this. Don't: Leave emails as 'unread' (or worse: read them, then mark them as unread). Often done by individuals who think they possess super powers ("I can mentally cache and distinguish between the emails I chose not to read, the ones that are actually new, and the ones I decided to revisit in the future; the fact that they all show up the same (bold = unread) does not confuse me"). Interactions with this super-powered individuals typically end up with them saying stuff like "I must have missed that email you are talking about (from 2 weeks ago)" or "I am a bit behind, so I haven't read your email, can you remind me". TIP: The only place where you are "allowed" unread email is in your Deleted Items folder. Don't: Interpret a read email as an email that has been processed. Doing that, means you will always end up with fake unread email (that you have actually read, but haven't dealt with completely so you then marked it as unread) lurking between actual unread email. Another side effect is reading the email and making a 'mental' note to action it, then leaving the email as read, so the only thing left to remind you to carry out the action is… you. You are not super human, you will forget. This is a key distinction. Reading (or even scanning) a new email, means you now know what needs to be done with it, in order for it to be truly considered processed. Truly processing an email is to, for example, write an email of your own (e.g. to reply or forward), or take a non-email related action (e.g. create calendar entry, do something on some website), or read it carefully to gain some knowledge (e.g. it had a spec as an attachment), or keep it around as reference etc. 'Reading' means that you know what to do, not that you have done it. An email that is read is an email that is triaged, not an email that is resolved. Sometimes the thing that needs to be done based on receiving the email, you can (and want) to do immediately after reading the email. That is fine, you read the email and you processed it (typically when it takes no longer than X minutes, where X is your personal tolerance – mine is roughly 2 minutes). Other times, you decide that you don't want to spend X minutes at that moment, so after reading the email you need a quick system for "marking" the email as to be processed later (and you still leave it as 'read' in outlook). See later section for how. C. DO: Use Outlook rules and have multiple folders where incoming email is automatically moved to Outlook email rules are very powerful and easy to configure. Use them to automatically file email into folders. Here are mine (note that if a rule catches an email message then no further rules get processed): "personal" Email is either personal or business related. Almost all personal email goes to my gmail account. The personal emails that end up on my work email account, go to a dedicated folder – that is achieved via a rule that looks at the email's 'From' field. For those that slip through, I use the new Outlook 2010 quick step of "Conversation To Folder" feature to let the slippage only occur once per conversation, and then update my rules. "External" and "ViaBlog" The remaining external emails either come from my blog (rule on the subject line) or are unsolicited (rule on the domain name not being microsoft) and they are filed accordingly. "invites" I may do a separate blog post on calendar management, but suffice to say it should be kept up to date. All invite requests end up in this folder, so that even if mail gets out of control, the calendar can stay under control (only 1 folder to check). I.e. so I can let the organizer know why I won't be attending their meeting (or that I will be). Note: This folder is the only one that shows the total number of items in it, instead of the total unread. "Inbox" The only email that ends up here is email sent TO me and me only. Note that this is also the only email that shows up above the systray icon in the notification toast – all other emails cannot interrupt. "ToMe++" Email where I am on the TO line, but there are other recipients as well (on the TO or CC line). "CC" Email where I am on the CC line. I need to read these, but nobody is expecting a response or action from me so they are not as urgent (and if they are and follow up with me, they'll receive a link to this). "@ XYZ" Emails to aliases that are about projects that I directly work on (and I wasn't on the TO or CC line, of course). Test: these projects are in my commitments that I get measured on at the end of the year. "Z Mass" and subfolders under it per distribution list (DL) Emails to aliases that are about topics that I am interested in, but not that I formally own/contribute to. Test: if I unsubscribed from these aliases, nobody could rightfully complain. "Admin" folder, which resides under "Z Mass" folder Emails to aliases that I was added typically by an admin, e.g. broad emails to the floor/group/org/building/division/company that I am a member of. "BCC" folder, which resides under "Z Mass" Emails where I was not on the TO or the CC line explicitly and the alias it was sent to is not one I explicitly subscribed to (or I have been added to the BCC line, which I briefly touched on in another post). When there are only a few quick minutes to catch up on email, read as much as possible from these folders, in this order: Invites, Inbox, ToMe++. Only when these folders are all read (remember that doesn't mean that each email in them has been fully dealt with), we can move on to the @XYZ and then the CC folders. Only when those are read we can go on to the remaining folders. Note that the typical flow in the "Z Mass" subfolders is to scan subject lines and use the new Ctrl+Delete Outlook 2010 feature to ignore conversations. D. DO: Use Outlook Search folders in combination with categories As you process each folder, when you open a new email (i.e. click on it and read it in the preview pane) the email becomes read and stays read and you have to decide whether: It can take 2 minutes to deal with for good, right now, or It will take longer than 2 minutes, so it needs to be postponed with a clear next step, which is one of ToReply – there may be intermediate action steps, but ultimately someone else needs to receive email about this Action – no email is required, but I need to do something ReadLater – no email is required from the quick scan, but this is too long to fully read now, so it needs to be read it later WaitingFor – the email is informing of an intermediate status and 'promising' a future email update. Need to track. SomedayMaybe – interesting but not important, non-urgent, non-time-bound information. I may want to spend part of one of my weekends reading it. For all these 'next steps' use Outlook categories (right click on the email and assign category, or use shortcut key). Note that I also use category 'WaitingFor' for email that I send where I am expecting a response and need to track it. Create a new search folder for each category (I dragged the search folders into my favorites at the top left of Outlook, above my inboxes). So after the activity of reading/triaging email in the normal folders (where the email arrived) is done, the result is a bunch of emails appearing in the search folders (configure them to show the total items, not the total unread items). To actually process email (that takes more than 2 minutes to deal with) process the search folders, starting with ToReply and Action. E. DO: Get into a Routine Now you have a system in place, get into a routine of using it. Here is how I personally use mine, but this part I keep tweaking: Spend short bursts of time (between meetings, during boring but mandatory meetings and, in general, 2-4 times a day) aiming to have no unread emails (and in the process deal with some emails that take less than 2 minutes). Spend around 30 minutes at the end of each day processing most urgent items in search folders. Spend as long as it takes each Friday (or even the weekend) ensuring there is no unnecessary email baggage carried forward to the following week. F. Other resources Official Outlook help on: Create custom actions rules, Manage e-mail messages with rules, creating a search folder. Video on ignoring conversations (Ctrl+Del). Official blog post on Quick Steps and in particular the Move Conversation to folder. If you've read "Getting Things Done" it is very obvious that my approach to email management is driven by GTD. A very similar approach was described previously by ScottHa (also influenced by GTD), worth reading here. He also described how he sets up 2 outlook rules ('invites' and 'external') which I also use – worth reading that too. Comments about this post welcome at the original blog.

Read the article

How to inject AutoMapper IMappingEngine with StructureMap

- by Jay Walker

Most of the examples I've found for Automapper use the static Mapper object for managing type mappings. For my project, I need to inject an IMapperEngine as part of object construction using StructureMap so that we can mock the mapper in unit tests so we can't use the static mapper. I also need to support configuring AutoMapper Profiles. My question is how can I configure the StructureMap registry so that it can supply an instance of IMappingEngine when an instance of MyService is constructed. Here is the Service constructor signature: public MyService(IMappingEngine mapper, IMyRepository myRepository, ILogger logger) And here is the StructureMap Registry public class MyRegistry : StructureMap.Configuration.DSL.Registry { public MyRegistry() { For<IMyRepository>().Use<MyRepository>(); For<ILogger>().Use<Logger>(); //what to do for IMappingEngine? } } And the profile I want to load public class MyAutoMapperProfile : AutoMapper.Profile { protected override void Configure() { this.CreateMap<MyModel, MyDTO>(); } }

Read the article

Microsoft Visual Studio Release History/Timelines/Milestones

1975 – Bill Gates and Paul Allen write a version of Basic for Altair 8080 1982 – IBM releases BASCOM 1.0 (developed by Microsoft) 1983 – Microsoft Basic Compiler System v5.35 for MS-DOS release 1984 - Microsoft Basic Compiler System v5.36 release 1985 – Microsoft QuickBASIC 1.0 1986 – Microsoft QuickBASIC 1.01, 1.02, 2.00 1987 – Microsoft QuickBASIC 2.01, 3.00, 4.00 1987 – Microsoft BASIC 6.0 1988 – Microsoft QuickBASIC 4.00, 4.00b, 4.50 1989 – Microsoft BASIC Professional Development System 7.0 1990 - Microsoft BASIC Professional Development System 7.1 1991 – Microsoft Visual Basic released May 20-Windows World Convention –Atlanta 1992 – Microsoft Visual Basic 2.0 1993 – Microsoft Visual Basic 3.0 in Standard and Professional versions 1995 – Microsoft Visual Basic 4.0 released, supported the new Windows 95 1997 – Microsoft Visual Basic 5.0 – introduction of IntelliSense 1998 – Microsoft Visual Studio 6.0 that included Visual Basic 6.0 released (first VS) 2002 – Microsoft Visual Basic .NET 7.0 2002 – Visual Studio .NET 2003 – Microsoft Visual Basic .NET 7.1 2003 – Microsoft Visual Studio w/Intellisense 2003 – Visual Studio .NET 2004 – Announce Visual Studios 2005 – Code name Whidbey 2005 – Visual Studio 2005 release w/Extensibility 2005 – Visual Studio Express released 2006 - Expression Tool Set released - devs and designers work together 2006 – Visual Studio Team release – November 30th 2007 – Visual Studio 2008 (code name Orcas) ships November = Video Studio Shell 2010 - Visual Studios (code name Rosario) span.fullpost {display:none;}

Read the article

jQuery Templates and Data Linking (and Microsoft contributing to jQuery)

The jQuery library has a passionate community of developers, and it is now the most widely used JavaScript library on the web today. Two years ago I announced that Microsoft would begin offering product support for jQuery, and that wed be including it in new versions of Visual Studio going forward. By default, when you create new ASP.NET Web Forms and ASP.NET MVC projects with VS 2010 youll find jQuery automatically added to your project. A few weeks ago during my second keynote at the MIX...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

HTTP client - HTTP 405 error "Method not allowed". I send a HTTP Post but for some reason HTTP Get i

- by Shino88

Hey I am using apache library. I have created a class which sends a post request to a servlet. I have set up the parameters for the client and i have created a HTTP post object to be sent but for some reason when i excute the request i get a reposnse that says the get method is not supported(which is true cause i have only made a dopost method in my servlet). It seems that a get request is being sent but i dont know why. The post method worked before but i started gettng http error 417 "Expectation Failed" which i fixed by adding paramenters. below is my class with the post method. P.s i am developing for android. public class HTTPrequestHelper { private final ResponseHandler<String> responseHandler; private static final String CLASSTAG = HTTPrequestHelper.class.getSimpleName(); private static final DefaultHttpClient client; static{ HttpParams params = new BasicHttpParams(); params.setParameter(CoreProtocolPNames.PROTOCOL_VERSION, HttpVersion.HTTP_1_1); params.setParameter(CoreProtocolPNames.HTTP_CONTENT_CHARSET, HTTP.UTF_8); ///params.setParameter(CoreProtocolPNames.USER_AGENT, "Android-x"); params.setParameter(CoreConnectionPNames.CONNECTION_TIMEOUT, 15000); params.setParameter(CoreConnectionPNames.STALE_CONNECTION_CHECK, false); SchemeRegistry schemeRegistry = new SchemeRegistry(); schemeRegistry.register( new Scheme("http", PlainSocketFactory.getSocketFactory(), 80)); schemeRegistry.register( new Scheme("https", SSLSocketFactory.getSocketFactory(), 443)); ThreadSafeClientConnManager cm = new ThreadSafeClientConnManager(params, schemeRegistry); client = new DefaultHttpClient(cm,params); } public HTTPrequestHelper(ResponseHandler<String> responseHandler) { this.responseHandler = responseHandler; } public void performrequest(String url, String para) { HttpPost post = new HttpPost(url); StringEntity parameters; try { parameters = new StringEntity(para); post.setEntity(parameters); } catch (UnsupportedEncodingException e) { // TODO Auto-generated catch block e.printStackTrace(); } BasicHttpResponse errorResponse = new BasicHttpResponse( new ProtocolVersion("HTTP_ERROR", 1, 1), 500, "ERROR"); try { client.execute(post, this.responseHandler); } catch (Exception e) { errorResponse.setReasonPhrase(e.getMessage()); try { this.responseHandler.handleResponse(errorResponse); } catch (Exception ex) { Log.e( "ouch", "!!! IOException " + ex.getMessage() ); } } } I tried added the allow header to the request but that did not work as well but im not sure if i was doing right. below is the code. client.addRequestInterceptor(new HttpRequestInterceptor() { @Override public void process(HttpRequest request, HttpContext context) throws HttpException, IOException { //request.addHeader("Allow", "POST"); } });

Read the article

Mapping UrlEncoded POST Values in ASP.NET Web API

- by Rick Strahl

If there's one thing that's a bit unexpected in ASP.NET Web API, it's the limited support for mapping url encoded POST data values to simple parameters of ApiController methods. When I first looked at this I thought I was doing something wrong, because it seems mighty odd that you can bind query string values to parameters by name, but can't bind POST values to parameters in the same way. To demonstrate here's a simple example. If you have a Web API method like this:[HttpGet] public HttpResponseMessage Authenticate(string username, string password) { …} and then hit with a URL like this: http://localhost:88/samples/authenticate?Username=ricks&Password=sekrit it works just fine. The query string values are mapped to the username and password parameters of our API method. But if you now change the method to work with [HttpPost] instead like this:[HttpPost] public HttpResponseMessage Authenticate(string username, string password) { …} and hit it with a POST HTTP Request like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Content-type: application/x-www-form-urlencoded Content-Length: 30 Username=ricks&Password=sekrit you'll find that while the request works, it doesn't actually receive the two string parameters. The username and password parameters are null and so the method is definitely going to fail. When I mentioned this over Twitter a few days ago I got a lot of responses back of why I'd want to do this in the first place - after all HTML Form submissions are the domain of MVC and not WebAPI which is a valid point. However, the more common use case is using POST Variables with AJAX calls. The following is quite common for passing simple values:$.post(url,{ Username: "Rick", Password: "sekrit" },function(result) {…}); but alas that doesn't work. How ASP.NET Web API handles Content Bodies Web API supports parsing content data in a variety of ways, but it does not deal with multiple posted content values. In effect you can only post a single content value to a Web API Action method. That one parameter can be very complex and you can bind it in a variety of ways, but ultimately you're tied to a single POST content value in your parameter definition. While it's possible to support multiple parameters on a POST/PUT operation, only one parameter can be mapped to the actual content - the rest have to be mapped to route values or the query string. Web API treats the whole request body as one big chunk of data that is sent to a Media Type Formatter that's responsible for de-serializing the content into whatever value the method requires. The restriction comes from async nature of Web API where the request data is read only once inside of the formatter that retrieves and deserializes it. Because it's read once, checking for content (like individual POST variables) first is not possible. However, Web API does provide a couple of ways to access the form POST data: Model Binding - object property mapping to bind POST values FormDataCollection - collection of POST keys/values ModelBinding POST Values - Binding POST data to Object Properties The recommended way to handle POST values in Web API is to use Model Binding, which maps individual urlencoded POST values to properties of a model object provided as the parameter. Model binding requires a single object as input to be bound to the POST data, with each POST key that matches a property name (including nested properties like Address.Street) being mapped and updated including automatic type conversion of simple types. This is a very nice feature - and a familiar one from MVC - that makes it very easy to have model objects mapped directly from inbound data. The obvious drawback with Model Binding is that you need a model for it to work: You have to provide a strongly typed object that can receive the data and this object has to map the inbound data. To rewrite the example above to use ModelBinding I have to create a class maps the properties that I need as parameters:public class LoginData { public string Username { get; set; } public string Password { get; set; } } and then accept the data like this in the API method:[HttpPost] public HttpResponseMessage Authenticate(LoginData login) { string username = login.Username; string password = login.Password; … } This works fine mapping the POST values to the properties of the login object. As a side benefit of this method definition, the method now also allows posting of JSON or XML to the same endpoint. If I change my request to send JSON like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: application/jsonContent-type: application/json Content-Length: 40 {"Username":"ricks","Password":"sekrit"} it works as well and transparently, courtesy of the nice Content Negotiation features of Web API. There's nothing wrong with using Model binding and in fact it's a common practice to use (view) model object for inputs coming back from the client and mapping them into these models. But it can be kind of a hassle if you have AJAX applications with a ton of backend hits, especially if many methods are very atomic and focused and don't effectively require a model or view. Not always do you have to pass structured data, but sometimes there are just a couple of simple response values that need to be sent back. If all you need is to pass a couple operational parameters, creating a view model object just for parameter purposes seems like overkill. Maybe you can use the query string instead (if that makes sense), but if you can't then you can often end up with a plethora of 'message objects' that serve no further purpose than to make Model Binding work. Note that you can accept multiple parameters with ModelBinding so the following would still work:[HttpPost] public HttpResponseMessage Authenticate(LoginData login, string loginDomain) but only the object will be bound to POST data. As long as loginDomain comes from the querystring or route data this will work. Collecting POST values with FormDataCollection Another more dynamic approach to handle POST values is to collect POST data into a FormDataCollection. FormDataCollection is a very basic key/value collection (like FormCollection in MVC and Request.Form in ASP.NET in general) and then read the values out individually by querying each. [HttpPost] public HttpResponseMessage Authenticate(FormDataCollection form) { var username = form.Get("Username"); var password = form.Get("Password"); …} The downside to this approach is that it's not strongly typed, you have to handle type conversions on non-string parameters, and it gets a bit more complicated to test such as setup as you have to seed a FormDataCollection with data. On the other hand it's flexible and easy to use and especially with string parameters is easy to deal with. It's also dynamic, so if the client sends you a variety of combinations of values on which you make operating decisions, this is much easier to work with than a strongly typed object that would have to account for all possible values up front. The downside is that the code looks old school and isn't as self-documenting as a parameter list or object parameter would be. Nevertheless it's totally functionality and a viable choice for collecting POST values. What about [FromBody]? Web API also has a [FromBody] attribute that can be assigned to parameters. If you have multiple parameters on a Web API method signature you can use [FromBody] to specify which one will be parsed from the POST content. Unfortunately it's not terribly useful as it only returns content in raw format and requires a totally non-standard format ("=content") to specify your content. For more info in how FromBody works and several related issues to how POST data is mapped, you can check out Mike Stalls post: How WebAPI does Parameter Binding Not really sure where the Web API team thought [FromBody] would really be a good fit other than a down and dirty way to send a full string buffer. Extending Web API to make multiple POST Vars work? Don't think so Clearly there's no native support for multiple POST variables being mapped to parameters, which is a bit of a bummer. I know in my own work on one project my customer actually found this to be a real sticking point in their AJAX backend work, and we ended up not using Web API and using MVC JSON features instead. That's kind of sad because Web API is supposed to be the proper solution for AJAX backends. With all of ASP.NET Web API's extensibility you'd think there would be some way to build this functionality on our own, but after spending a bit of time digging and asking some of the experts from the team and Web API community I didn't hear anything that even suggests that this is possible. From what I could find I'd say it's not possible primarily because Web API's Routing engine does not account for the POST variable mapping. This means [HttpPost] methods with url encoded POST buffers are not mapped to the parameters of the endpoint, and so the routes would never even trigger a request that could be intercepted. Once the routing doesn't work there's not much that can be done. If somebody has an idea how this could be accomplished I would love to hear about it. Do we really need multi-value POST mapping? I think that that POST value mapping is a feature that one would expect of any API tool to have. If you look at common APIs out there like Flicker and Google Maps etc. they all work with POST data. POST data is very prominent much more so than JSON inputs and so supporting as many options that enable would seem to be crucial. All that aside, Web API does provide very nice features with Model Binding that allows you to capture many POST variables easily enough, and logistically this will let you build whatever you need with POST data of all shapes as long as you map objects. But having to have an object for every operation that receives a data input is going to take its toll in heavy AJAX applications, with a lot of types created that do nothing more than act as parameter containers. I also think that POST variable mapping is an expected behavior and Web APIs non-support will likely result in many, many questions like this one: How do I bind a simple POST value in ASP.NET WebAPI RC? with no clear answer to this question. I hope for V.next of WebAPI Microsoft will consider this a feature that's worth adding. Related Articles Passing multiple POST parameters to Web API Controller Methods Mike Stall's post: How Web API does Parameter Binding Where does ASP.NET Web API Fit?© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Which is Better? The Start Screen in Windows 8 or the Old Start Menu? [Analysis]

- by Asian Angel

There has been quite a bit of controversy surrounding Microsoft’s emphasis on the new Metro UI Start Screen in Windows 8, but when it comes down to it which is really better? The Start Screen in Windows 8 or the old Start Menu? Tech blog 7 Tutorials has done a quick analysis to see which one actually works better (and faster) when launching applications and doing searches. Images courtesy of 7 Tutorials. You can view the results and a comparison table by visiting the blog post linked below. Windows 8 Analysis: Is the Start Screen an Improvement vs. the Start Menu? [7 Tutorials] How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

Read the article

XNA Notes 007

- by George Clingerman

Every week I keep wondering if there’s going to be enough activity in the community to keep doing these notes on a weekly basis and every week I’m reminded of just how awesome and active the XNA community is. There’s engines being made, tutorials being created, games being crafted. There’s information being shared, questions being answered and then there’s another whole community around the Xbox LIVE Indie Games themselves. It’s really incredibly to just watch all that’s going on and I’m glad I’m playing a small part in all of this. So here’s what I noticed happening in the XNA community last week. If there’s things I’m missing, always feel free to let me know. I love learning about new corners of the XNA community that I wasn’t aware of or just have been missing! XNA Developers: Uditha Bandara held an XNA Game Development Workshops at Singapore Universities http://uditha.wordpress.com/2011/02/18/xna-game-development-workshops-at-singapore-universities-event-update/ Binary Tweed gives his talks about Indie City and gives his opinion on the false promise of digital distribution http://www.develop-online.net/news/37053/OPINION-The-false-promise-of-digital-distribution Kris Steele posts his Trivia or Die postmortem http://www.krissteele.net/blogdetails.aspx?id=246 @MadNinjaSkills (James Johnston) posts his feelings on testing for XBLIG http://www.ezmuze.co.uk/101 Simon (@DDReaper) posts hints and tips for XNA developers to help get the size of their projects down http://twitter.com/#!/DDReaper/status/38279440924545024 http://xna-uk.net/blogs/darkgenesis/archive/2011/02/17/look-at-the-size-of-that-thing.aspx Michael B. McLaughlin proving why he should be an XNA MVP posts the list of commonly used value types in XNA games http://geekswithblogs.net/mikebmcl/archive/2011/02/17/list-of-commonly-used-value-types-in-xna-games.aspx http://twitter.com/#!/mikebmcl/status/38166541354811392 Paul Powell (@ITSligoPaul) posts about a common sprite batch as a game service http://itspaulsblog.blogspot.com/2011/02/xna-common-sprite-batch-as-game-service.html @SigilXNA (John Defenbaugh) posts his new level editor video for the sequel to Opac’s Journey http://twitter.com/SigilXNA/statuses/36548174373982209 http://twitter.com/#!/SigilXNA/status/36548174373982209 http://youtu.be/QHbmxB_2AW8 @jwatte updates kW Animation for XNA 4.0 http://www.enchantedage.com/xna-animation @DSebJ posts Blender to SunBurn http://twitter.com/#!/DSebJ/status/36564920224976896 http://dsebj.evolvingsoftware.com/?p=187 Ads and WP7 Games - @mechaghost shares his revenue data for his ad based games http://www.occasionalgamer.com/2011/02/09/ads-and-wp7-games/ Xbox LIVE Indie Games (XBLIG): Steven Hurdle posts day 100 of his quest to find a fantastic XBLIG purchase every day http://writingsofmassdeduction.com/2011/02/17/day-100-radiangames-ballistic/ Xbox 360 Indie Game Buying Guide - 12 games for $60 including several Xbox LIVE Indie games! (although if the XNA community was asked we could have recommended 60 games for $60...) http://www.indiegamemag.com/xbox360-indie-games-buying-guide/ The best selling Xbox LIVE Indie games of 2010 http://www.1up.com/news/xbox-live-most-popular-games I’d buy that for a dollar! - the California Literary Review points out a few gems on the XBLIG marketplace (and other places) where you can game on the cheap. http://calitreview.com/14125 Armless Octopus Episode 39 - The Indie Gem Octocast http://www.armlessoctopus.com/2011/02/17/armless-octocast-episode-39-the-indie-gem-octocast/ Ska Studios posts a plethora of updates http://www.ska-studios.com/2011/02/11/good-morning-gato-49/ http://www.ska-studios.com/2011/02/14/vampire-smile-valentines/ http://www.ska-studios.com/2011/02/16/the-dishwasher-vs-finds-a-home/ Kotaku posts about the Xbox LIVE Indie Game that makes you go Pew Pew Pew Pew Pew Pew http://kotaku.com/#!5760632/the-game-that-makes-you-go-pew-pew-pew-pew-pew-pew-pew GameMarx continues to be active and doing a ton for the XBLIG community reviews and Top 5 indie games of the week 2/4-2/10 http://www.gamemarx.com/video/the-show/22/ep-9-february-11-2010.aspx a new podcast Xbox Indie New Releases http://twitter.com/#!/gamemarx/status/36888849107910656 http://www.gamemarx.com/news/2011/02/13/a-new-podcast-xbox-indie-new-releases.aspx @MasterBlud uploads Indocalypse XBLIG Collections #2 http://www.youtube.com/watch?v=uzCZSv075mc&feature=youtu.be&a http://twitter.com/#!/MasterBlud/status/37100029697064960 Just Press Start interviews Michael Hicks from MichaelArts, 18 year old creator of Honor in Vengeance http://justpressstart.net/?p=465 Achievement Locked interviews Kris Steele of FunInfused Games http://xboxindies.wordpress.com/2011/02/11/interview-fun-infused-games/ XNA Game Development: XNA -UK launches their XAP test service to help the XNA community http://xna-uk.net/blogs/news/archive/2011/02/18/xna-uk-xap-test-service-now-live.aspx Transmute shows off a video of the standard character editor http://www.youtube.com/watch?v=qqH6gErG948&feature=youtu.be Microsoft Tech Student introduces their first tech student of the month. Meet Daniel Van Tassel from the University of Utah and learn how he created an Xbox LIVE Indie Game using XNA Studio http://blogs.msdn.com/b/techstudent/archive/2010/12/22/introducing-our-first-tech-student-of-the-month-daniel-van-tassel.aspx XNA for Silverlight Developers Part 3 - Animation (transforms) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-3-Animation-transforms.aspx XNA for Silverlight Developers Part 4 - Animation (frame based) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-4-Animation-frame-based.aspx @suhinini tweets about an XNA Sprite Font generation tool http://twitter.com/#!/suhinini/status/36841370131890176 http://www.nubik.com/SpriteFont/ XNATouch 1.5 is out and in it’s words is faster, simpler, more reliable and has the XNA 4.0 API http://monogame.codeplex.com/releases/view/60815 IndieCity is hosting marketing workshops for Indie Developers (UK and US) http://forums.create.msdn.com/forums/p/75197/457654.aspx#457654 New York Students - Learn XNA and Silverlight for Xbox 360 and Windows Phone 7 http://forums.create.msdn.com/forums/p/72753/456964.aspx#456964 http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/learn-to-build-your-own-games-for-xbox-360-and-windows-phone-7.aspx http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/build-a-game-in-48-hours-win-a-kinect-or-windows-phone-7.aspx Extra Credits: Videogame Music http://www.escapistmagazine.com/videos/view/extra-credits/2019-Videogame-Music Steve Pavlina posts an article with useful information for all XNA/XBLIG developers http://www.stevepavlina.com/blog/2011/02/completion-vs-perfection/

Search Results

Search found 33477 results on 1340 pages for 'static vs non static'.

Page 485/1340 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492 | Next Page >

- by Srekel

- by gablin

- by gablin

- by growse

- by user75228

- by Sopalajo de Arrierez

- by nuvio

- by Patrick

- by salvationishere

- by user186319

- by Tom

- by TNK

- by Gravitas

- by Mathew

- by orip

- by Daniel Moth

- by pinaldave

- by Daniel Moth

- by Jay Walker

- by Shino88

- by Rick Strahl

- by Asian Angel

- by George Clingerman

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492 | Next Page >