Search Results

Search found 14639 results on 586 pages for 'coding environment'.

Page 486/586 | < Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >

  • My rhythm game runs choppy even with high frame rate

    - by felipedrl
    I'm coding a rhythm game and the game runs smoothly with uncapped fps. But when I try to cap it around 60 the game updates in little chunks, like hiccups, as if it was skipping frames or at a very low frame rate. The reason I need to cap frame rate is because in some computers I tested, the fps varies a lot (from ~80 - ~250 fps) and those drops are noticeable and degrade response time. Since this is a rhythm game this is very important. This issue is driving me crazy. I've spent a few weeks already on it and still can't figure out the problem. I hope someone more experienced than me could shed some light on it. I'll try to put here all the hints I've tried along with two pseudo codes for game loops I tried, so I apologize if this post gets too lengthy. 1st GameLoop: const uint UPDATE_SKIP = 1000 / 60; uint nextGameTick = SDL_GetTicks(); while(isNotDone) { // only false when a QUIT event is generated! if (processEvents()) { if (SDL_GetTicks() > nextGameTick) { update(UPDATE_SKIP); render(); nextGameTick += UPDATE_SKIP; } } } 2nd Game Loop: const uint UPDATE_SKIP = 1000 / 60; while (isNotDone) { LARGE_INTEGER startTime; QueryPerformanceCounter(&startTime); // process events will return false in case of a QUIT event processed if (processEvents()) { update(frameTime); render(); } LARGE_INTEGER endTime; do { QueryPerformanceCounter(&endTime); frameTime = static_cast<uint>((endTime.QuadPart - startTime.QuadPart) * 1000.0 / frequency.QuadPart); } while (frameTime < UPDATE_SKIP); } [1] At first I thought it was a timer resolution problem. I was using SDL_GetTicks, but even when I switched to QueryPerformanceCounter, supposedly less granular, I saw no difference. [2] Then I thought it could be due to a rounding error in my position computation and since game updates are smaller in high FPS that would be less noticeable. Indeed there is an small error, but from my tests I realized that it is not enough to produce the position jumps I'm getting. Also, another intriguing factor is that if I enable vsync I'll get smooth updates @60fps regardless frame cap code. So why not rely on vsync? Because some computers can force a disable on gfx card config. [3] I started printing the maximum and minimum frame time measured in 1sec span, in the hope that every a few frames one would take a long time but still not enough to drop my fps computation. It turns out that, with frame cap code I always get frame times in the range of [16, 18]ms, and still, the game "does not moves like jagger". [4] My process' priority is set to HIGH (Windows doesn't allow me to set REALTIME for some reason). As far as I know there is only one thread running along with the game (a sound callback, which I really don't have access to it). I'm using AudiereLib. I then disabled Audiere by removing it from the project and still got the issue. Maybe there are some others threads running and one of them is taking too long to come back right in between when I measured frame times, I don't know. Is there a way to know which threads are attached to my process? [5] There are some dynamic data being created during game run. But It is a little bit hard to remove it to test. Maybe I'll have to try harder this one. Well, as I told you I really don't know what to try next. Anything, I mean, anything would be of great help. What bugs me more is why at 60fps & vsync enabled I get an smooth update and at 60fps & no vsync I don't. Is there a way to implement software vsync? I mean, query display sync info? Thanks in advance. I appreciate the ones that got this far and yet again I apologize for the long post. Best Regards from a fellow coder.

    Read the article

  • Understanding the 'High Performance' meaning in Extreme Transaction Processing

    - by kyap
    Despite my previous blogs entries on SOA/BPM and Identity Management, the domain where I'm the most passionated is definitely the Extreme Transaction Processing, commonly called XTP.I came across XTP back to 2007 while I was still FMW Product Manager in EMEA. At that time Oracle acquired a company called Tangosol, which owned an unique product called Coherence that we renamed to Oracle Coherence. Beside this innovative renaming of the product, to be honest, I didn't know much about it, except being a "distributed in-memory cache for Extreme Transaction Processing"... not very helpful still.In general when people doesn't fully understand a technology or a concept, they tend to find some shortcuts, either correct or not, to justify their lack-of understanding... and of course I was part of this category of individuals. And the shortcut was "Oracle Coherence Cache helps to improve Performance". Excellent marketing slogan... but not very meaningful still. By chance I was able to get away quickly from that group in July 2007* at Thames Valley Park (UK), after I attended one of the most interesting workshops, in my 10 years career in Oracle, delivered by Brian Oliver. The biggest mistake I made was to assume that performance improvement with Coherence was related to the response time. Which can be considered as legitimus at that time, because after-all caches help to reduce latency on cached data access, hence reduce the response-time. But like all caches, you need to define caching and expiration policies, thinking about the cache-missed strategy, and most of the time you have to re-write partially your application in order to work with the cache. At a result, the expected benefit vanishes... so, not very useful then?The key mistake I made was my perception or obsession on how performance improvement should be driven, but I strongly believe this is still a common problem to most of the developers. In fact we all know the that the performance of a system is generally presented by the Capacity (or Throughput), with the 2 important dimensions Speed (response-time) and Volume (load) :Capacity (TPS) = Volume (T) / Speed (S)To increase the Capacity, we can either reduce the Speed(in terms of response-time), or to increase the Volume. However we tend to only focus on reducing the Speed dimension, perhaps it is more concrete and tangible to measure, and nicer to present to our management because there's a direct impact onto the end-users experience. On the other hand, we assume the Volume can be addressed by the underlying hardware or software stack, so if we need more capacity (scale out), we just add more hardware or software. Unfortunately, the reality proves that IT is never as ideal as we assume...The challenge with Speed improvement approach is that it is generally difficult and costly to make things already fast... faster. And by adding Coherence will not necessarily help either. Even though we manage to do so, the Capacity can not increase forever because... the Speed can be influenced by the Volume. For all system, we always have a performance illustration as follow: In all traditional system, the increase of Volume (Transaction) will also increase the Speed (Response-Time) as some point. The reason is simple: most of the time the Application logics were not designed to scale. As an example, if you have a while-loop in your application, it is natural to conceive that parsing 200 entries will require double execution-time compared to 100 entries. If you need to "Speed-up" the execution, you can only upgrade your hardware (scale-up) with faster CPU and/or network to reduce network latency. It is technically limited and economically inefficient. And this is exactly where XTP and Coherence kick in. The primary objective of XTP is about designing applications which can scale-out for increasing the Volume, by applying coding techniques to keep the execution-time as constant as possible, independently of the number of runtime data being manipulated. It is actually not just about having an application running as fast as possible, but about having a much more predictable system, with constant response-time and linearly scale, so we can easily increase throughput by adding more hardwares in parallel. It is in general combined with the Low Latency Programming model, where we tried to optimize the network usage as much as possible, either from the programmatic angle (less network-hoops to complete a task), and/or from a hardware angle (faster network equipments). In this picture, Oracle Coherence can be considered as software-level XTP enabler, via the Distributed-Cache because it can guarantee: - Constant Data Objects access time, independently from the number of Objects and the Coherence Cluster size - Data Objects Distribution by Affinity for in-memory data grouping - In-place Data Processing for parallel executionTo summarize, Oracle Coherence is indeed useful to improve your application performance, just not in the way we commonly think. It's not about the Speed itself, but about the overall Capacity with Extreme Load while keeping consistant Speed. In the future I will keep adding new blog entries around this topic, with some sample codes experiences sharing that I capture in the last few years. In the meanwhile if you want to know more how Oracle Coherence, I strongly suggest you to start with checking how our worldwide customers are using Oracle Coherence first, then you can start playing with the product through our tutorial.Have Fun !

    Read the article

  • Why bother writing an Windows 8 app?

    - by Dennis Vroegop
    So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

    Read the article

  • CS, SE, HCI, Information Science, Please recommendation for further education of the former performing art manager seeking career in IT industries? [on hold]

    - by Baek Seungjoo
    IT specialists there J Thank you very much for your collective efforts here, and I got huge help reading your professional comments and advices on each questions I have searched so far! This time, I would like to ask for your practical advices or recommendation on what I am struggling on at this moment. I am currently seeking higher education for my career transition from performing art manager and director to “IT software and/or service development and management specialist”. However, as this field is quite new to me, and there are lots of different work positions, I have no idea which grad major I better pursue in order to get qualification. Of course I know this question could sounds wired as it is kind of personal choice. But my lack of understanding on how IT software companies work in general, your practical and experience-based advice will be great help to me, who spent more than two months of self-research on net. OK. Before my question, here is my plan and history, which are quite different from those currently in IT industry I think… 1) Target Firstly, get career transition into IT service or products companies and get experiences. Eventually, pursue IT entrepreneurship in combination with my arts and cultural production and business expertise. 2) Background Career: performing arts director and manager in theatre-based scale opera and musical Art education in youth BA in literature and Chinese studies (Art & Humanities) MA in Cultural & Creative Industries (Art & Humanities) – dissertation with focus on digital prosumption and the lived experience of the prosumer. (a qualitative research on the agents in the digital world) 2) Personally Huge interest in IT hardware and software, and their trend. Skills to build up, repair, tune PCs -of course this is no more than personal hobby, but shows my interests in this field. 4) Problem Encounter a question “So, what do you think you can contribute practically in this position”. This question turn me down everytime I go through job interviews, and I decided more education in the relevant area. Here are my questions. 1) In terms of work positions in IT software companies, I wonder if I can put the comparison of what “Artists” is to “Arts Manager or Director” is what “Developer” is to “Product Manager”. (Of course, this stereotypical division of Artist-Art Manager is out of sense because the domain overlaps to some extent, and is blurring at least in my field, and they are in different contexts, but just speaking easily.) Normally, artist comes with special arts educations, and they live in their own world of artistic inspiration and creation, and they feel alive in practice and on stages. Meanwhile, from the point of staging and managing productions, the role of art manager is critical as well. Our role cares how the production appeals to the audience in effective way, how to make profit and future sustainable management through that, how to set up future strategy in consideration of the external conditions such as political and social circumstances, audience trend and level, other production trends from on-going and historical perspectives, how and what the production make voice to the society from political, economic, humanitarian stances. So, we need keen eyes on economic, political, and societal environment, have to understand human-being and their desires, must know how to make presentation and attract investors, must have sense in managing and fighting over the limited financial resource, how to extend networking and so on. It is common that the two agents create productions in collaboration (normally not in that ideal way but in conflict and fight though J ). So, we need to know each other’s expertise to some extent, for better production. What are the work positions in IT software industries equivalent to the role of “art manager” in performing arts? From my view, considering developers come with special education in the world of computer science, software engineering, or others (self-education sometimes), and they express themselves with the arts of coding, computer languages on the black screen, and make sort of their artistic production online to the audience, I guess there might be someone who collaborate with developers in creating, managing, and launching IT services or products. 2) Which education among CS, SE, HCI, Information Science, is needed for those seeking such work position? Especially for person like me. (At this moment, Information Science has the highest possibility to get in, since I lack Calculus and Math in undergrad educaiton. But please let me know irrespective of this concern, I think there are ways to back it up if CS or SE education needed in my case) 3) Which field between Information Science and HCI can be more practical background regarding job hungting? And which of them have more demands in job market? AS I checked, HCI is more close to CS than IS in its focus of study area. Thank you very much for your patience reading such a long inquiry, and I appreciate to your efforts in advance. Have a nice day in this beautiful summer.

    Read the article

  • World Backup Day

    - by red(at)work
    Here at Red Gate Towers, the SQL Backup development team have been hunkered down in their shed for the last few months, with the toolbox, blowtorch and chamois leather out, upgrading SQL Backup. When we started, autumn leaves were falling. Now we're about to finish, spring flowers are budding. If not quite a gleaming new machine, at the very least a familiar, reliable engine with some shiny new bits on it will trundle magnificently out of the workshop. One of the interesting things I've noticed about working on software development teams is that the team is together for so long 'implementing' stuff - designing, coding, testing, fixing bugs and so on - that you occasionally forget why you're doing what you're doing. Doubt creeps in. It feels like a long time since we launched this project in a fanfare of optimism and enthusiasm, and all that clarity of purpose and mission "yee-haw" has dissipated with the daily pressures of development. Every now and again, we look up from our bunker and notice all those thousands of users out there, with their different configurations and working practices and each with their own set of problems and requirements, and we ask ourselves "does anyone care about what we're doing?" Has the world moved on while we've been busy? Could we have been doing something more useful with the time and talent of all these excellent people we've assembled? In truth, you can research and test and validate all you like, but you never really know if you've done the right thing (or at least, something valuable for some users) until you release. All projects suffer this insecurity. If they don't, maybe you're not worrying enough about what you're building. The two enemies of software development are certainty and complacency. Oh, and of course, rival teams with Nerf guns. The goal of SQL Backup 7 is to make it so easy to schedule regular restores of your backups that you have no excuse not to. Why schedule a restore? Because your data is not as good as your last backup. It's only as good as your last successful restore. If you're not checking your backups by restoring them and running an integrity check on the database, you're only doing half the job. It seems that most DBAs know that this is best practice, but it can be tricky and time-consuming to set up, so it's one of those tasks that can get forgotten in the midst all the other demands on their time. Sometimes, they're just too busy firefighting. But if it was simple to do? That was our inspiration for SQL Backup 7. So it was heartening to read Brent Ozar's blog post the other day about World Backup Day. To be honest, I'd never heard of World Backup Day (Talk Like a Pirate Day, yes, but not this one); however, its emphasis on not just backing up your data but checking the validity of those backups was exactly the same message we had in mind when building SQL Backup 7. It's printed on a piece of A3 above our planning board - "Make backup verification so easy to do that no DBA has an excuse for not doing it" It's the missing piece that completes the puzzle. Simple idea, great concept, useful feature, but, as it turned out, far from straightforward to implement. The problem is the future. As Marty McFly discovered over the course of three movies, the future is uncertain and hard to predict - so when you are scheduling a restore to take place an hour, day, week or month after the backup, there are all kinds of questions that you wouldn't normally have to consider. Where will this backup live? Will it even exist at the time? Will it be split into multiple files? What will the file names be? Will it be encrypted? What files should it be restored to? SQL Backup needs to know what to expect at the time the restore job is actually run. Of course, a DBA will know the answer to all these questions, but to deliver the whole point of version 7, we wanted to make it easy for them to input that information into SQL Backup. We think we've done that. When you create your scheduled backup job, there is now an option to create a "reminder" to follow it up with a scheduled restore to verify the resulting backups. Actually, it's much more than a reminder, as it stores all the relevant data so you can click it and pre-populate the wizard with all the right settings to set up your verification restores. Simple. But, what do you think? We'd love you to try it. Post by Brian Harris

    Read the article

  • What Counts for A DBA - Logic

    - by drsql
    "There are 10 kinds of people in the world. Those who will always wonder why there are only two items in my list and those who will figured it out the first time they saw this very old joke."  Those readers who will give up immediately and get frustrated with me for not explaining it to them are not likely going to be great technical professionals of any sort, much less a programmer or administrator who will be constantly dealing with the common failures that make up a DBA's day.  Many of these people will stare at this like a dog staring at a traffic signal and still have no more idea of how to decipher the riddle. Without explanation they will give up, call the joke "stupid" and, feeling quite superior, walk away indignantly to their job likely flipping patties of meat-by-product. As a data professional or any programmer who has strayed  to this very data-oriented blog, you would, if you are worth your weight in air, either have recognized immediately what was going on, or felt a bit ignorant.  Your friends are chuckling over the joke, but why is it funny? Unfortunately you left your smartphone at home on the dresser because you were up late last night programming and were running late to work (again), so you will either have to fake a laugh or figure it out.  Digging through the joke, you figure out that the word "two" is the most important part, since initially the joke mentioned 10. Hmm, why did they spell out two, but not ten? Maybe 10 could be interpreted a different way?  As a DBA, this sort of logic comes into play every day, and sometimes it doesn't involve nerdy riddles or Star Wars folklore.  When you turn on your computer and get the dreaded blue screen of death, you don't immediately cry to the help desk and sit on your thumbs and whine about not being able to work. Do that and your co-workers will question your nerd-hood; I know I certainly would. You figure out the problem, and when you have it narrowed down, you call the help desk and tell them what the problem is, usually having to explain that yes, you did in fact try to reboot before calling.  Of course, sometimes humility does come in to play when you reach the end of your abilities, but the ‘end of abilities’ is not something any of us recognize readily. It is handy to have the ability to use logic to solve uncommon problems: It becomes especially useful when you are trying to solve a data-related problem such as a query performance issue, and the way that you approach things will tell your coworkers a great deal about your abilities.  The novice is likely to immediately take the approach of  trying to add more indexes or blaming the hardware. As you become more and more experienced, it becomes increasingly obvious that performance issues are a very complex topic. A query may be slow for a myriad of reasons, from concurrency issues, a poor query plan because of a parameter value (like parameter sniffing,) poor coding standards, or just because it is a complex query that is going to be slow sometimes. Some queries that you will deal with may have twenty joins and hundreds of search criteria, and it can take a lot of thought to determine what is going on.  You can usually figure out the problem to almost any query by using basic knowledge of how joins and queries work, together with the help of such things as the query plan, profiler or monitoring tools.  It is not unlikely that it can take a full day’s work to understand some queries, breaking them down into smaller queries to find a very tiny problem. Not every time will you actually find the problem, and it is part of the process to occasionally admit that the problem is random, and everything works fine now.  Sometimes, it is necessary to realize that a problem is outside of your current knowledge, and admit temporary defeat: You can, at least, narrow down the source of the problem by looking logically at all of the possible solutions. By doing this, you can satisfy your curiosity and learn more about what the actual problem was. For example, in the joke, had you never been exposed to the concept of binary numbers, there is no way you could have known that binary - 10 = decimal - 2, but you could have logically come to the conclusion that 10 must not mean ten in the context of the joke, and at that point you are that much closer to getting the joke and at least won't feel so ignorant.

    Read the article

  • Navigate Quickly with JustCode and Ctrl+Click

    Ctrl + Click is a widely used shortcut for Go To Definition in many development environments but not in Visual Studio. We, the JustCode team, find it really useful so we added it to Visual Studio. But we didn't stop there - we improved it even further. Read on to find the details. With JustCode you get an enhanced Go To Definition. By default you can execute it in the Visual Studio editor using one of the following shortcuts: Middle Click, Ctrl+Left Click, F12, Ctrl+Enter, Ctrl+B. The first usage of this feature is not much different from the default Visual Studio Go To Definition command use it where a member, type, method, property, etc is used to navigate to the definition of that item. For example, if you have this method:         public void Start()         {             lion = new Lion();             lion.Roar();         } If you hold Ctrl and click on the usage of the lion you will go to the lion member definition. If you hold Ctrl and click on the Lion you will go to the Lion class definition. What we added is the ability to easily find all the usages of the item you just navigated to. For example:     public class Lion     {         public void Roar()         {             Console.WriteLine("Rhaaaar");         }     }   If you hold Ctrl and click on the Lion definition you will see all the usages of the Lion type; if you click on the Roar method definition you will see all the usages of the Roar method: And if there is only one usage you will get automatically to that usage. In the examples I use C#, but it works also in VB.NET, JavaScript, ASP.NET and XAML. Why we like this feature? Let me first start with how the Ctrl+Click (or Go To Definition command) is used. We noticed that developers use it especially in what we call "code browsing sessions". In simple words this is when you browse around the code looking for a bug, just reading the code or searching for something. Sounds familiar? In our experience when you go to the definition of some item you often want to know more about it and the first thing you need is to find its usages. With JustCode this is just one click away. Why Ctrl+Click/Middle Click over F12/Ctrl+Enter/Ctrl+B? Actually you can use all of them. But during these "code browsing sessions" we noticed that most developers use the mouse. So the mouse is already in use and pressing Ctrl+Click (or the Middle Click) is so natural. During heavy coding sessions or if you are a keyboard type developer F12 (or any of the other keyboard shortcuts) is the key. We really use heavily this feature not only in our team but in the whole company. It saves us a bit of time many times a day. And it adds up. We hope you will like it too. Your feedback is more than welcome for us. P.S. If you dont want JustCode to capture the Ctrl+Click and the Middle Click in the editor, you can change that in JustCode->Options->General in the Navigation group. Keyboard shortcuts can be reassigned using the Visual Studio keyboard shortcuts editor.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • SOA, Governance, and Drugs

    Why is IT governance important in service oriented architecture (SOA)? IT Governance provides a framework for making appropriate decisions based on company guidelines and accepted standards. This framework also outlines each stakeholder’s responsibilities and authority when making important architectural or design decisions. Furthermore, this framework of governance defines parameters and constraints that are used to give context and perspective when making decisions. The use of governance as it applies to SOA ensures that specific design principles and patterns are used when developing and maintaining services. When governance is consistently applied systems the following benefits are achieved according to Anne Thomas Manes in 2010. Governance makes sure that services conform to standard interface patterns, common data modeling practices, and promotes the incorporation of existing system functionality by building on top of other available services across a system. Governance defines development standards based on proven design principles and patterns that promote reuse and composition. Governance provides developers a set of proven design principles, standards and practices that promote the reduction in system based component dependencies.  By following these guidelines, individual components will be easier to maintain. For me personally, I am a fan of IT governance, and feel that it valuable part of any corporate IT department. However, depending on how it is implemented can really affect the value of using IT governance.  Companies need to find a way to ensure that governance does not become extreme in its policies and procedures. I know for me personally, I would really dislike working under a completely totalitarian or laissez-faire version of governance. Developers need to be able to be creative in their designs and too much governance can really impede the design process and prevent the most optimal design from being developed. On the other hand, with no governance enforced, no standards will be followed and accepted design patterns will be ignored. I have personally had to spend a lot of time working on this particular scenario and I have found that the concept of code reuse and composition is almost nonexistent.  Based on this, too much time and money is wasted on redeveloping existing aspects of an application that already exist within the system as a whole. I think moving forward we will see a staggered form of IT governance, regardless if it is for SOA or IT in general.  Depending on the size of a company and the size of its IT department,  I can see IT governance as a layered approach in that the top layer will be defined by enterprise architects that focus on abstract concepts pertaining to high level design, general  guidelines, acceptable best practices, and recommended design patterns.  The next layer will be defined by solution architects or department managers that further expand on abstracted guidelines defined by the enterprise architects. This layer will contain further definitions as to when various design patterns, coding standards, and best practices are to be applied based on the context of the solutions that are being developed by the department. The final layer will be defined by the system designer or a solutions architect assed to a project in that they will define what design patterns will be used in a solution, naming conventions, as well as outline how a system will function based on the best practices defined by the previous layers. This layered approach allows for IT departments to be flexible in that system designers have creative leeway in designing solutions to meet the needs of the business, but they must operate within the confines of the abstracted IT governance guidelines.  A real world example of this can be seen in the United States as it pertains to governance of the people in that the US government defines rules and regulations in the abstract and then the state governments take these guidelines and applies them based on the will of the people in each individual state. Furthermore, the county or city governments are the ones that actually enforce these rules based on how they are interpreted by local community.  To further define my example, the United States government defines that marijuana is illegal. Each individual state has the option to determine this regulation as it wishes in that the state of Florida determines that all uses of the drug are illegal, but the state of California legally allows the use of marijuana for medicinal purposes only. Based on these accepted practices each local government enforces these rules in that a police officer will arrest anyone in the state of Florida for having this drug on them if they walk down the street, but in California if a person has a medical prescription for the drug they will not get arrested.  REFERENCESThomas Manes, Anne. (2010). Understanding SOA Governance: http://www.soamag.com/I40/0610-2.php

    Read the article

  • Navigation in a #WP7 application with MVVM Light

    - by Laurent Bugnion
    In MVVM applications, it can be a bit of a challenge to send instructions to the view (for example a page) from a viewmodel. Thankfully, we have good tools at our disposal to help with that. In his excellent series “MVVM Light Toolkit soup to nuts”, Jesse Liberty proposes one approach using the MVVM Light messaging infrastructure. While this works fine, I would like to show here another approach using what I call a “view service”, i.e. an abstracted service that is invoked from the viewmodel, and implemented on the view. Multiple kinds of view services In fact, I use view services quite often, and even started standardizing them for the Windows Phone 7 applications I work on. If there is interest, I will be happy to show other such view services, for example Animation services, responsible to start/stop animations on the view. Dialog service, in charge of displaying messages to the user and gathering feedback. Navigation service, in charge of navigating to a given page directly from the viewmodel. In this article, I will concentrate on the navigation service. The INavigationService interface In most WP7 apps, the navigation service is used in quite a straightforward way. We want to: Navigate to a given URI. Go back. Be notified when a navigation is taking place, and be able to cancel. The INavigationService interface is quite simple indeed: public interface INavigationService { event NavigatingCancelEventHandler Navigating; void NavigateTo(Uri pageUri); void GoBack(); } Obviously, this interface can be extended if necessary, but in most of the apps I worked on, I found that this covers my needs. The NavigationService class It is possible to nicely pack the navigation service into its own class. To do this, we need to remember that all the PhoneApplicationPage instances use the same instance of the navigation service, exposed through their NavigationService property. In fact, in a WP7 application, it is the main frame (RootFrame, of type PhoneApplicationFrame) that is responsible for this task. So, our implementation of the NavigationService class can leverage this. First the class will grab the PhoneApplicationFrame and store a reference to it. Also, it registers a handler for the Navigating event, and forwards the event to the listening viewmodels (if any). Then, the NavigateTo and the GoBack methods are implemented. They are quite simple, because they are in fact just a gateway to the PhoneApplicationFrame. The whole class is as follows: public class NavigationService : INavigationService { private PhoneApplicationFrame _mainFrame; public event NavigatingCancelEventHandler Navigating; public void NavigateTo(Uri pageUri) { if (EnsureMainFrame()) { _mainFrame.Navigate(pageUri); } } public void GoBack() { if (EnsureMainFrame() && _mainFrame.CanGoBack) { _mainFrame.GoBack(); } } private bool EnsureMainFrame() { if (_mainFrame != null) { return true; } _mainFrame = Application.Current.RootVisual as PhoneApplicationFrame; if (_mainFrame != null) { // Could be null if the app runs inside a design tool _mainFrame.Navigating += (s, e) => { if (Navigating != null) { Navigating(s, e); } }; return true; } return false; } } Exposing URIs I find that it is a good practice to expose each page’s URI as a constant. In MVVM Light applications, a good place to do that is the ViewModelLocator, which already acts like a central point of setup for the views and their viewmodels. Note that in some cases, it is necessary to expose the URL as a string, for instance when a query string needs to be passed to the view. So for example we could have: public static readonly Uri MainPageUri = new Uri("/MainPage.xaml", UriKind.Relative); public const string AnotherPageUrl = "/AnotherPage.xaml?param1={0}&param2={1}"; Creating and using the NavigationService Normally, we only need one instance of the NavigationService class. In cases where you use an IOC container, it is easy to simply register a singleton instance. For example, I am using a modified version of a super simple IOC container, and so I can register the navigation service as follows: SimpleIoc.Register<INavigationService, NavigationService>(); Then, it can be resolved where needed with: SimpleIoc.Resolve<INavigationService>(); Or (more frequently), I simply declare a parameter on the viewmodel constructor of type INavigationService and let the IOC container do its magic and inject the instance of the NavigationService when the viewmodel is created. On supported platforms (for example Silverlight 4), it is also possible to use MEF. Or, of course, we can simply instantiate the NavigationService in the ViewModelLocator, and pass this instance as a parameter of the viewmodels’ constructor, injected as a property, etc… Once the instance has been passed to the viewmodel, it can be used, for example with: NavigationService.NavigateTo(ViewModelLocator.ComparisonPageUri); Testing Thanks to the INavigationService interface, navigation can be mocked and tested when the viewmodel is put under unit test. Simply implement and inject a mock class, and assert that the methods are called as they should by the viewmodel. Conclusion As usual, there are multiple ways to code a solution answering your needs. I find that view services are a really neat way to delegate view-specific responsibilities such as animation, dialogs and of course navigation to other classes through an abstracted interface. In some cases, such as the NavigationService class exposed here, it is even possible to standardize the implementation and pack it in a class library for reuse. I hope that this sample is useful! Happy coding. Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Migrating R Scripts from Development to Production

    - by Mark Hornick
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 “How do I move my R scripts stored in one database instance to another? I have my development/test system and want to migrate to production.” Users of Oracle R Enterprise Embedded R Execution will often store their R scripts in the R Script Repository in Oracle Database, especially when using the ORE SQL API. From previous blog posts, you may recall that Embedded R Execution enables running R scripts managed by Oracle Database using both R and SQL interfaces. In ORE 1.3.1., the SQL API requires scripts to be stored in the database and referenced by name in SQL queries. The SQL API enables seamless integration with database-based applications and ease of production deployment. Loading R scripts in the repository Before talking about migration, we’ll first introduce how users store R scripts in Oracle Database. Users can add R scripts to the repository in R using the function ore.scriptCreate, or SQL using the function sys.rqScriptCreate. For the sample R script     id <- 1:10     plot(1:100,rnorm(100),pch=21,bg="red",cex =2)     data.frame(id=id, val=id / 100) users wrap this in a function and store it in the R Script Repository with a name. In R, this looks like ore.scriptCreate("RandomRedDots", function () { line-height: 115%; font-family: "Courier New";">     id <- 1:10     plot(1:100,rnorm(100),pch=21,bg="red",cex =2)     data.frame(id=id, val=id / 100)) }) In SQL, this looks like begin sys.rqScriptCreate('RandomRedDots',  'function(){     id <- 1:10     plot(1:100,rnorm(100),pch=21,bg="red",cex =2)     data.frame(id=id, val=id / 100)   }'); end; / The R function ore.scriptDrop and SQL function sys.rqScriptDrop can be used to drop these scripts as well. Note that the system will give an error if the script name already exists. Accessing R scripts once they’ve been loaded If you’re not using a source code control system, it is possible that your R scripts can be misplaced or files modified, making what is stored in Oracle Database to only or best copy of your R code. If you’ve loaded your R scripts to the database, it is straightforward to access these scripts from the database table SYS.RQ_SCRIPTS. For example, select * from sys.rq_scripts where name='myScriptName'; From R, scripts in the repository can be loaded into the R client engine using a function similar to the following: ore.scriptLoad <- function(name) { query <- paste("select script from sys.rq_scripts where name='",name,"'",sep="") str.f <- OREbase:::.ore.dbGetQuery(query) assign(name,eval(parse(text = str.f)),pos=1) } ore.scriptLoad("myFunctionName") This function is also useful if you want to load an existing R script from the repository into another R script in the repository – think modular coding style. Just include this function in the body of the other function and load the named script. Migrating R scripts from one database instance to another To move a set of functions from one system to another, the following script loads the functions from one R script repository into the client R engine, then connects to the target database and creates the scripts there with the same names. scriptNames <- OREbase:::.ore.dbGetQuery("select name from sys.rq_scripts where name not like 'RQG$%' and name not like 'RQ$%'")$NAME for(s in scriptNames) { cat(s,"\n") ore.scriptLoad(s) } ore.disconnect() ore.connect("rquser","orcl","localhost","rquser") for(s in scriptNames) { cat(s,"\n") ore.scriptDrop(s) ore.scriptCreate(s,get(s)) } Best Practice When naming R scripts, keep in mind that the name can be up to 128 characters. As such, consider organizing scripts in a directory structure manner. For example, if an organization has multiple groups or applications sharing the same database and there are multiple components, use “/” to facilitate the function organization: line-height: 115%;">ore.scriptCreate("/org1/app1/component1/myFuntion1", myFunction1) ore.scriptCreate("/org1/app1/component1/myFuntion2", myFunction2) ore.scriptCreate("/org1/app2/component2/myFuntion2", myFunction2) ore.scriptCreate("/org2/app2/component1/myFuntion3", myFunction3) ore.scriptCreate("/org3/app2/component1/myFuntion4", myFunction4) Users can then query for all functions using the path prefix when looking up functions. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • javaf, problem...plz help someone...urgent [closed]

    - by innovative_aj
    i have made a word guessing game, when i click myButton to check if the guessed word is right or wrong, ball1 is moved into the "container" if its right, i want that when i click the button again and if the typed word is right, the 2nd ball should move into the container too... means one ball per correct answer...plz help me someone and provide me with the code that i can implement, its quite urgent... controller class coding /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package project3; import java.net.URL; import java.util.ResourceBundle; import javafx.event.ActionEvent; import javafx.event.EventHandler; import javafx.fxml.FXML; import javafx.fxml.Initializable; import javafx.scene.control.Button; import javafx.scene.control.Label; import javafx.scene.control.TextField; import javafx.scene.layout.StackPane; import javafx.scene.shape.Circle; /** * FXML Controller class * * @xxx */ public class MyFxmlController implements Initializable { @FXML // fx:id="ball1" private Circle ball1; // Value injected by FXMLLoader @FXML // fx:id="ball2" private Circle ball2; // Value injected by FXMLLoader @FXML // fx:id="ball3" private Circle ball3; // Value injected by FXMLLoader @FXML // fx:id="ball4" private Circle ball4; // Value injected by FXMLLoader @FXML // fx:id="container" private Circle container; // Value injected by FXMLLoader @FXML // fx:id="myButton" private Button myButton; // Value injected by FXMLLoader @FXML // fx:id="myLabel1" private Label myLabel1; // Value injected by FXMLLoader @FXML // fx:id="myLabel2" private Label myLabel2; // Value injected by FXMLLoader @FXML // fx:id="pane" private StackPane pane; // Value injected by FXMLLoader @FXML // fx:id="txt" private TextField txt; // Value injected by FXMLLoader @Override // This method is called by the FXMLLoader when initialization is complete public void initialize(URL fxmlFileLocation, ResourceBundle resources) { assert ball1 != null : "fx:id=\"ball1\" was not injected: check your FXML file 'MyFxml.fxml'."; assert ball2 != null : "fx:id=\"ball2\" was not injected: check your FXML file 'MyFxml.fxml'."; assert ball3 != null : "fx:id=\"ball3\" was not injected: check your FXML file 'MyFxml.fxml'."; assert ball4 != null : "fx:id=\"ball4\" was not injected: check your FXML file 'MyFxml.fxml'."; assert container != null : "fx:id=\"container\" was not injected: check your FXML file 'MyFxml.fxml'."; assert myButton != null : "fx:id=\"myButton\" was not injected: check your FXML file 'MyFxml.fxml'."; assert myLabel1 != null : "fx:id=\"myLabel1\" was not injected: check your FXML file 'MyFxml.fxml'."; assert myLabel2 != null : "fx:id=\"myLabel2\" was not injected: check your FXML file 'MyFxml.fxml'."; assert pane != null : "fx:id=\"pane\" was not injected: check your FXML file 'MyFxml.fxml'."; assert txt != null : "fx:id=\"txt\" was not injected: check your FXML file 'MyFxml.fxml'."; // initialize your logic here: all @FXML variables will have been injected myButton.setOnAction(new EventHandler<ActionEvent>(){ @Override public void handle(ActionEvent event) { int count = 0; String guessed=txt.getText(); boolean result; result=MyCode.check(guessed); if(result) { ball1.setTranslateX(600); ball1.setTranslateY(250-container.getRadius()); //ball2.setTranslateX(600); // ball2.setTranslateY(250-container.getRadius()); } else System.out.println("wrong"); } }); } } word guessing logic public class MyCode { static String x="Netbeans"; static String y[]={"net","beans","neat","beat","bet"}; //static int counter; // public MyCode() { // counter++; //} static boolean check(String guessed) { int count=0; boolean result=false; //counter++; //System.out.println("turns"+counter); for(count=0;count<5;count++) { if(guessed.equals(y[count])) { result=true; break; } } if(result) System.out.println("Right"); else System.out.println("Wrong"); return result; } }

    Read the article

  • Adventures in Windows 8: Solving activation errors

    - by Laurent Bugnion
    Note: I tagged this article with “MVVM” because I got a few support requests for MVVM Light regarding this exact issue. In fact it is a Windows 8 issue and has nothing to do with MVVM Light per se… Sometimes when you work on a Windows 8 app, you will get a very annoying issue when starting the app. In that case, the app doesn’t not even start past the Splash screen. Putting a breakpoint in App.xaml.cs doesn’t help because the app doesn’t even reach that point! So what exactly is happening? Well when a Windows 8 app starts, the system is performing a few check first. One of the checks, for instance, is to see if an app with the same package ID is already available. The package ID is a unique value set in the package manifest. In the Solution Explorer, double click on Package.appxmanifest. This opens the manifest in a special editor Click on the Packaging tab See the GUID under Package Name. This is the unique ID I am talking about. If there is a conflict (i.e. if an app is already installed with the exact same ID), Windows will warm the user that the app is already installed. However when you are in the process of developing an app, you install and uninstall the same app many many times (every time that you start in Visual Studio), and sometimes some issues arise, for instance failing to uninstall the app before starting the new instance of the same app. First step if you get such an error When the application fails to start past the splash screen, the first step is to identify what kind of error happened. In my experience the “already installed” is by far the most frequent (in fact I never had another such error), but it can be something else. An annoying thing is that the popup that shows the error is usually started below the Windows 8 app, and so you don’t even see it! This is especially true if you run this in the Simulator. In that case, do the following: Press on the Simulator’s home button, then press on the Desktop tile on the Start menu. The error popup should be shown on the desktop. If your applications runs on the Local machine, you also do the same and press the Windows button, and then from the Start menu press the Desktop tile. Deployment error in Studio Sometimes the same error causes Visual Studio to fail launching the application at all with a deployment error. This is a better case, because at least it is clear that there is an issue. In that case, write down the code that is shown in the Error window (for instance 0x80073D05 in the example below). Once you have the error code, go to the “Troubleshooting packaging, deployment, and query of Windows Store apps” page and look up the code in question. In my case, the error was “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED”, “An error occurred while deleting the package's previously existing application data.” Solving the “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED” issue Update: Before trying the below, you can also try the simple steps: Exit Visual Studio Go to the Start menu Locate your app’s tile. It should be visible in the Start menu directly, towards the far end on the right. Right click the tile and select Uninstall from the App Bar. Restart Visual Studio and try again. Sometimes it helps. If it doesn’t, then try the following: In order to solve the case where Windows, for any reason, fails to delete the existing application before starting the new instance, follow the steps: Open the Package.appxmanifest in Visual Studio Open the Packaging tab. Change the Package name. For tests you can just try to change the last character of the GUID, though I would recommend creating a brand new GUID. Press Start Type GUID Start the GUID Generator application Select Registry Format Press Copy. Paste the new GUID in place of the Package Name in Visual Studio Important: don’t forget to remove the curly brackets at the beginning and at the end of the newly pasted GUID. Then you just have to cross your fingers and start the application again… If it works, celebrate. if it doesn’t work… well at this point I am not sure so good luck with that ;) Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • StreamInsight 2.1 Released

    - by Roman Schindlauer
    The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program {     static void Main(string[] args)     {         using (Server server = Server.Create("Default"))         {             // Create an app             Application app = server.CreateApplication("app");             // Define a simple observable which generates an integer every second             var source = app.DefineObservable(() =>                 Observable.Interval(TimeSpan.FromSeconds(1)));             // Define a sink.             var sink = app.DefineObserver(() =>                 Observer.Create<long>(x => Console.WriteLine(x)));             // Define a query to filter the events             var query = from e in source                         where e % 2 == 0                         select e;             // Bind the query to the sink and create a runnable process             using (IDisposable proc = query.Bind(sink).Run("MyProcess"))             {                 Console.WriteLine("Press a key to dispose the process...");                 Console.ReadKey();             }         }     } }   That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

    Read the article

  • StreamInsight 2.1 Released

    - by Roman Schindlauer
    The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program {     static void Main(string[] args)     {         using (Server server = Server.Create("Default"))         {             // Create an app             Application app = server.CreateApplication("app");             // Define a simple observable which generates an integer every second             var source = app.DefineObservable(() =>                 Observable.Interval(TimeSpan.FromSeconds(1)));             // Define a sink.             var sink = app.DefineObserver(() =>                 Observer.Create<long>(x => Console.WriteLine(x)));             // Define a query to filter the events             var query = from e in source                         where e % 2 == 0                         select e;             // Bind the query to the sink and create a runnable process             using (IDisposable proc = query.Bind(sink).Run("MyProcess"))             {                 Console.WriteLine("Press a key to dispose the process...");                 Console.ReadKey();             }         }     } }   That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

    Read the article

  • C++ strongly typed typedef

    - by Kian
    I've been trying to think of a way of declaring strongly typed typedefs, to catch a certain class of bugs in the compilation stage. It's often the case that I'll typedef an int into several types of ids, or a vector to position or velocity: typedef int EntityID; typedef int ModelID; typedef Vector3 Position; typedef Vector3 Velocity; This can make the intent of code more clear, but after a long night of coding one might make silly mistakes like comparing different kinds of ids, or adding a position to a velocity perhaps. EntityID eID; ModelID mID; if ( eID == mID ) // <- Compiler sees nothing wrong { /*bug*/ } Position p; Velocity v; Position newP = p + v; // bug, meant p + v*s but compiler sees nothing wrong Unfortunately, suggestions I've found for strongly typed typedefs include using boost, which at least for me isn't a possibility (I do have c++11 at least). So after a bit of thinking, I came upon this idea, and wanted to run it by someone. First, you declare the base type as a template. The template parameter isn't used for anything in the definition, however: template < typename T > class IDType { unsigned int m_id; public: IDType( unsigned int const& i_id ): m_id {i_id} {}; friend bool operator==<T>( IDType<T> const& i_lhs, IDType<T> const& i_rhs ); }; Friend functions actually need to be forward declared before the class definition, which requires a forward declaration of the template class. We then define all the members for the base type, just remembering that it's a template class. Finally, when we want to use it, we typedef it as: class EntityT; typedef IDType<EntityT> EntityID; class ModelT; typedef IDType<ModelT> ModelID; The types are now entirely separate. Functions that take an EntityID will throw a compiler error if you try to feed them a ModelID instead, for example. Aside from having to declare the base types as templates, with the issues that entails, it's also fairly compact. I was hoping anyone had comments or critiques about this idea? One issue that came to mind while writing this, in the case of positions and velocities for example, would be that I can't convert between types as freely as before. Where before multiplying a vector by a scalar would give another vector, so I could do: typedef float Time; typedef Vector3 Position; typedef Vector3 Velocity; Time t = 1.0f; Position p = { 0.0f }; Velocity v = { 1.0f, 0.0f, 0.0f }; Position newP = p + v*t; With my strongly typed typedef I'd have to tell the compiler that multypling a Velocity by a Time results in a Position. class TimeT; typedef Float<TimeT> Time; class PositionT; typedef Vector3<PositionT> Position; class VelocityT; typedef Vector3<VelocityT> Velocity; Time t = 1.0f; Position p = { 0.0f }; Velocity v = { 1.0f, 0.0f, 0.0f }; Position newP = p + v*t; // Compiler error To solve this, I think I'd have to specialize every conversion explicitly, which can be kind of a bother. On the other hand, this limitation can help prevent other kinds of errors (say, multiplying a Velocity by a Distance, perhaps, which wouldn't make sense in this domain). So I'm torn, and wondering if people have any opinions on my original issue, or my approach to solving it.

    Read the article

  • Problems installing Memcache (PECL extension)

    - by Petrus
    I have installed memcached fine, and now I will need to install PECL extension memcache. Im running RedHat x86_64 es5. The installation gives me this: downloading memcache-2.2.6.tgz ... Starting to download memcache-2.2.6.tgz (35,957 bytes) ..........done: 35,957 bytes 11 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 Enable memcache session handler support? [yes] : Notice: Use of undefined constant STDIN - assumed 'STDIN' in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in /usr/lib/php/PEAR/Frontend/CLI.php on line 304 building in /root/tmp/pear-build-root/memcache-2.2.6 running: /root/tmp/pear/memcache/configure --enable-memcache-session=yes checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcache support... yes, shared checking whether to enable memcache session handler support... yes checking for the location of ZLIB... no checking for the location of zlib... /usr checking for session includes... /usr/include/php checking for memcache session support... enabled checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -o memcache.lo mkdir .libs cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -fPIC -DPIC -o .libs/memcache.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -o memcache_queue.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -fPIC -DPIC -o .libs/memcache_queue.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -o memcache_standard_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -fPIC -DPIC -o .libs/memcache_standard_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -o memcache_consistent_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -fPIC -DPIC -o .libs/memcache_consistent_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -o memcache_session.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -fPIC -DPIC -o .libs/memcache_session.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=link cc -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -o memcache.la -export-dynamic -avoid-version -prefer-pic -module -rpath /root/tmp/pear-build-root/memcache-2.2.6/modules memcache.lo memcache_queue.lo memcache_standard_hash.lo memcache_consistent_hash.lo memcache_session.lo cc -shared .libs/memcache.o .libs/memcache_queue.o .libs/memcache_standard_hash.o .libs/memcache_consistent_hash.o .libs/memcache_session.o -Wl,-soname -Wl,memcache.so -o .libs/memcache.so creating memcache.la (cd .libs && rm -f memcache.la && ln -s ../memcache.la memcache.la) /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=install cp ./memcache.la /root/tmp/pear-build-root/memcache-2.2.6/modules cp ./.libs/memcache.so /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.so cp ./.libs/memcache.lai /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.la PATH="$PATH:/sbin" ldconfig -n /root/tmp/pear-build-root/memcache-2.2.6/modules ---------------------------------------------------------------------- Libraries have been installed in: /root/tmp/pear-build-root/memcache-2.2.6/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Build complete. Don't forget to run 'make test'. running: make INSTALL_ROOT="/root/tmp/pear-build-root/install-memcache-2.2.6" install Installing shared extensions: /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/ running: find "/root/tmp/pear-build-root/install-memcache-2.2.6" | xargs ls -dils 361232 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6 361263 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr 361264 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib 361265 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php 361266 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions 361267 4 drwxr-xr-x 2 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626 361262 236 -rwxr-xr-x 1 root root 235575 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so Build process completed successfully Installing '/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.6 Extension memcache enabled in php.ini The memcache.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 I tried as well to install this extension "memcached 1.0.2 (PHP extension for interfacing with memcached via libmemcached library)" but it failed: downloading memcached-1.0.2.tgz ... Starting to download memcached-1.0.2.tgz (22,724 bytes) ........done: 22,724 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /root/tmp/pear-build-root/memcached-1.0.2 running: /root/tmp/pear/memcached/configure checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcached support... yes, shared checking for libmemcached... yes, shared checking whether to enable memcached session handler support... yes checking whether to enable memcached igbinary serializer support... no checking for ZLIB... yes, shared checking for zlib location... /usr checking for session includes... /usr/include/php checking for memcached session support... enabled checking for memcached igbinary support... disabled checking for libmemcached location... configure: error: memcached support requires libmemcached. Use --with-libmemcached-dir= to specify the prefix where libmemcached headers and library are located ERROR: `/root/tmp/pear/memcached/configure' failed The memcached.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 Is there a kind soul out there that can solve this puzzle?

    Read the article

  • Slow NFS and GFS2 performance

    - by Tiago
    Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data directory of the storage server and the latter also has a webserver running to serve files to browser clients. In the storage servers I've created a GFS2 FS to hold the data which is wired to drbd. I've chose GFS2 mainly because the announced performance and also because the volume size which has to be pretty high. Since we entered production I've been facing two problems that I think are deeply connected. First of all, the NFS mount on the webservers keeps hanging for a minute or so and then resumes normal operations. By analyzing the logs I've found out that NFS stops answering for a while and outputs the following log lines: Oct 15 18:15:42 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:44 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:46 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:51 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:58 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK In this case, the hang lasted for 16 seconds but sometimes it takes 1 or 2 minutes to resume normal operations. My first guess was this was happening due to heavy load of the NFS mount and that by increasing RPCNFSDCOUNT to a higher value, this would become stable. I've increased it several times and apparently, after a while, the logs started appearing less times. The value is now on 32. After further investigating the issue, I've came across a different hang, despite the NFS messages still appear in the logs. Sometimes, the GFS2 FS simply hangs which causes both the NFS and the storage webserver to serve files. Both stay hang for a while and then they resume normal operations. This hangs leaves no trace on client side (also leaves no NFS ... not responding messages) and, on the storage side, the log system appears to be empty, even though the rsyslogd is running. The nodes connect themselves through a 10Gbps non-dedicated connection but I don't think this is an issue because the GFS2 hang is confirmed but connecting directly to the active storage server. I've been trying to solve this for a while now and I've tried different NFS configuration options, before I've found out the GFS2 FS is also hanging. The NFS mount is exported as such: /srv/data/ <ip_address>(rw,async,no_root_squash,no_all_squash,fsid=25) And the NFS client mounts with: mount -o "async,hard,intr,wsize=8192,rsize=8192" active.storage.vlan:/srv/data /srv/data After some tests, these were the configurations that yielded more performance to the cluster. I am desperate to find a solution for this as the cluster is already in production mode and I need to fix this so that this hangs won't happen in the future and I don't really know for sure what and how I should be benchmarking. What I can tell is that this is happening due to heavy loads as I have tested the cluster earlier and this problems weren't happening at all. Please tell me if you need me to provide configuration details of the cluster, and which do you want me to post. As last resort I can migrate the files to a different FS but I need some solid pointers on whether this will solve this problems as the volume size is extremely large at this point. The servers are being hosted by a third-party enterprise and I don't have physical access to them. Best regards. EDIT 1: The servers are physical servers and their specs are: Webservers: Intel Bi Xeon E5606 2x4 2.13GHz 24GB DDR3 Intel SSD 320 2 x 120GB Raid 1 Storage: Intel i5 3550 3.3GHz 16GB DDR3 12 x 2TB SATA Initially there was a VRack setup between the servers but we've upgraded one of the storage servers to have more RAM and it wasn't inside the VRack. They connect through a shared 10Gbps connection between them. Please note that it is the same connection that is used for public access. They use a single IP (using IP Failover) to connect between them and to allow for a graceful failover. NFS is therefore over a public connection and not under any private network (it was before the upgrade, were the problem still existed). The firewall was configured and tested thoroughly but I disabled it for a while to see if the problem still occurred, and it did. From my knowledge the hosting provider isn't blocking or limiting the connection between either the servers and the public domain (at least under a given bandwidth consumption threshold that hasn't been reached yet). Hope this helps figuring out the problem. EDIT 2: Relevant software versions: CentOS 2.6.32-279.9.1.el6.x86_64 nfs-utils-1.2.3-26.el6.x86_64 nfs-utils-lib-1.1.5-4.el6.x86_64 gfs2-utils-3.0.12.1-32.el6_3.1.x86_64 kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64 drbd84-utils-8.4.2-1.el6.elrepo.x86_64 DRBD configuration on storage servers: #/etc/drbd.d/storage.res resource storage { protocol C; on <server1 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server1 ip>:7788; meta-disk internal; } on <server2 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server2 ip>:7788; meta-disk internal; } } NFS Configuration in storage servers: #/etc/sysconfig/nfs RPCNFSDCOUNT=32 STATD_PORT=10002 STATD_OUTGOING_PORT=10003 MOUNTD_PORT=10004 RQUOTAD_PORT=10005 LOCKD_UDPPORT=30001 LOCKD_TCPPORT=30001 (can there be any conflict in using the same port for both LOCKD_UDPPORT and LOCKD_TCPPORT?) GFS2 configuration: # gfs2_tool gettune <mountpoint> incore_log_blocks = 1024 log_flush_secs = 60 quota_warn_period = 10 quota_quantum = 60 max_readahead = 262144 complain_secs = 10 statfs_slow = 0 quota_simul_sync = 64 statfs_quantum = 30 quota_scale = 1.0000 (1, 1) new_files_jdata = 0 Storage network environment: eth0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip address> Bcast:<bcast address> Mask:<ip mask> inet6 addr: <ip address> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:957025127 errors:0 dropped:0 overruns:0 frame:0 TX packets:1473338731 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2630984979622 (2.3 TiB) TX bytes:1648430431523 (1.4 TiB) eth0:0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip failover address> Bcast:<bcast address> Mask:<ip mask> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 The IP addresses are statically assigned with the given network configurations: DEVICE="eth0" BOOTPROTO="static" HWADDR=<mac address> ONBOOT="yes" TYPE="Ethernet" IPADDR=<ip address> NETMASK=<net mask> and DEVICE="eth0:0" BOOTPROTO="static" HWADDR=<mac address> IPADDR=<ip failover> NETMASK=<net mask> ONBOOT="yes" BROADCAST=<bcast address> Hosts file to allow for a graceful NFS failover in conjunction with NFS option fsid=25 set on both storage servers: #/etc/hosts <storage ip failover address> active.storage.vlan <webserver ip failover address> active.service.vlan As you can see, packet errors are down to 0. I've also ran ping for a long time without any packet loss. MTU size is the normal 1500. As there is no VLan by now, this is the MTU used to communicate between servers. The webservers' network environment is similar. One thing I forgot to mention is that the storage servers handle ~200GB of new files each day through the NFS connection, which is a key point for me to think this is some kind of heavy load problem with either NFS or GFS2. If you need further configuration details please tell me. EDIT 3: Earlier today we had a major filesystem crash on the storage server. I couldn't get the details of the crash right away because the server stop responding. After the reboot, I noticed the filesystem was extremely slow, and I was not being able to serve a single file through either NFS or httpd, perhaps due to cache warming or so. Nevertheless, I've been monitoring the server closely and the following error came up in dmesg. The source of the problem is clearly GFS, which is waiting for a lock and ends up starving after a while. INFO: task nfsd:3029 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. nfsd D 0000000000000000 0 3029 2 0x00000080 ffff8803814f79e0 0000000000000046 0000000000000000 ffffffff8109213f ffff880434c5e148 ffff880624508d88 ffff8803814f7960 ffffffffa037253f ffff8803815c1098 ffff8803814f7fd8 000000000000fb88 ffff8803815c1098 Call Trace: [<ffffffff8109213f>] ? wake_up_bit+0x2f/0x40 [<ffffffffa037253f>] ? gfs2_holder_wake+0x1f/0x30 [gfs2] [<ffffffff814ff42e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814ff2cb>] mutex_lock+0x2b/0x50 [<ffffffffa0379f21>] gfs2_log_reserve+0x51/0x190 [gfs2] [<ffffffffa0390da2>] gfs2_trans_begin+0x112/0x1d0 [gfs2] [<ffffffffa0369b05>] ? gfs2_dir_check+0x35/0xe0 [gfs2] [<ffffffffa0377943>] gfs2_createi+0x1a3/0xaa0 [gfs2] [<ffffffff8121aab1>] ? avc_has_perm+0x71/0x90 [<ffffffffa0383d1e>] gfs2_create+0x7e/0x1a0 [gfs2] [<ffffffffa037783f>] ? gfs2_createi+0x9f/0xaa0 [gfs2] [<ffffffff81188cf4>] vfs_create+0xb4/0xe0 [<ffffffffa04217d6>] nfsd_create_v3+0x366/0x4c0 [nfsd] [<ffffffffa0429703>] nfsd3_proc_create+0x123/0x1b0 [nfsd] [<ffffffffa041a43e>] nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa025a5d4>] svc_process_common+0x344/0x640 [sunrpc] [<ffffffff810602a0>] ? default_wake_function+0x0/0x20 [<ffffffffa025ac10>] svc_process+0x110/0x160 [sunrpc] [<ffffffffa041ab62>] nfsd+0xc2/0x160 [nfsd] [<ffffffffa041aaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81091de6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81091d50>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20

    Read the article

  • .htaccess not working (mod_rewrite)

    - by Mike Curry
    Edit: I am pretty sure my .htaccess file is NOT being executed, and the problem is NOT with my rewrite rules. I have not having any luck getting my .htaccess with mod_rewrite working. Basically all I am trying to do is remove 'www' from "http://www.site.com" and "https://www.site.com". If there is anything I am missing (conf files, etc let me know I willl update this) I jsut can't see whats wrong here... I am using a 1&1 VPS III Virtual private server... anyone ever have this issue? I am using Ubuntu 8.04 Server LTS. Here is my .htaccess file (located @ /var/www/site/trunk/html/) Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.*) [NC] RewriteRule (.*) //%1/$1 [L,R=301] My mod_rewrite is enabled: The auto regenerated sym link is there in mods-available and /usr/lib/apache2/modules/ contains mod_rewrite.so root@s15348441:/etc/apache2/mods-available# more rewrite.load LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so root@s15348441:/var/log# apache2ctl -t -D DUMP_MODULES Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK My apache config files: apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # <Directory "/usr/share/apache2/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ My default config file for www on apache NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My ssl config file NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn SSLEngine On SSLCertificateFile /usr/local/ssl/crt/public.crt SSLCertificateKeyFile /usr/local/ssl/private/private.key CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My /etc/apache2/httpd.conf is blank The directory /etc/apache2/conf.d has nothing in it but one file (charset) contents of /etc/apache2/conf.dcharset # Read the documentation before enabling AddDefaultCharset. # In general, it is only a good idea if you know that all your files # have this encoding. It will override any encoding given in the files # in meta http-equiv or xml encoding tags. #AddDefaultCharset UTF-8 My apache error.log [Wed Jun 03 00:12:31 2009] [error] [client 216.168.43.234] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Jun 03 05:03:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:03:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:48 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:57 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:17:28 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:26:23 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 05:26:34 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:03:41 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:03:51 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:25:07 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:25:17 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 12:09:25 2009] [error] [client 61.139.105.163] File does not exist: /var/www/site/trunk/html/fastenv [Wed Jun 03 15:04:42 2009] [notice] Graceful restart requested, doing restart [Wed Jun 03 15:04:43 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 15:29:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:29:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:30:32 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:45:54 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 15:46:05 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations

    Read the article

  • Displaying wait cursor in while backgroundworker is running

    - by arc1880
    During the start of my windows application, I have to make a call to a web service to retrieve some default data to load onto my application. During the load of the form, I run a backgroundworker to retrieve this data. I want to display the wait cursor until this data is retrieved. How would I do this? I've tried setting the wait cursor before calling the backgroundworker to run. When I report a progress of 100 then I set it back to the default cursor. The wait cursor comes up but when I move the mouse it disappears. Environment: Windows 7 Pro 64-bit VS2010 C# .NET 4.0 Windows Forms EDIT: I am setting the cursor the way Jay Riggs suggested. It only works if I don't move the mouse. **UPDATE: I have created a button click which does the following: When I do the button click and move my mouse, the wait cursor appears regardless if I move my mouse or not. void BtnClick() { Cursor = Cursors.WaitCursor; Thread.Sleep(8000); Cursor = Cursors.Default; } If I do the following: I see the wait cursor and when I move the mouse it disappears inside the form. If I move to my status bar or the menu bar the wait cursor appears. Cursor = Cursors.WaitCursor; if (!backgroundWorker.IsBusy) { backGroundWorker.RunWorkerAsync(); } void backGroundWorkerDoWork(object sender, DoWorkEventArgs e) { Thread.Sleep(8000); } void backGroundWorkerCompleted(object sender, RunWorkerCompletedEventArgs e) { Cursor = Cursors.Default; } If I do the following: The wait cursor appears and when I move the mouse it still appears but will sometimes flicker off and on when moving in text fields. if (!backgroundWorker.IsBusy) { backGroundWorker.RunWorkerAsync(); } void backGroundWorkerDoWork(object sender, DoWorkEventArgs e) { UseWaitCursor = true; Thread.Sleep(8000); } void backGroundWorkerCompleted(object sender, RunWorkerCompletedEventArgs e) { UseWaitCursor = false; }

    Read the article

  • Android ADT Eclipse plugin, parseSDKContent failed

    - by Sebastian Ganslandt
    I've just set up my first Android development environment consisting of Eclipse 3.5 Mac OSX 10.5 Android SDK for x86 macs ADT Eclipse plugin 0.9.6 I've set set $PATH to my SDK/tools directory (which shouldn't matter if I only use Eclipse right?) and started Eclipse, but when I try to set the path to the SDK in Eclipse, i get the error "parseSdkContent failed". The stack trace of from the thrown exception is java.lang.IllegalArgumentException: http://www.w3.org/2001/XMLSchema at javax.xml.validation.SchemaFactory.newInstance(SchemaFactory.java:181) at com.android.ide.eclipse.adt.internal.sdk.LayoutDevicesXsd.getValidator(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.parseLayoutDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.loadDefaultLayoutDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.loadDefaultAndUserDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.Sdk.<init>(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.Sdk.loadSdk(Unknown Source) at com.android.ide.eclipse.adt.AdtPlugin$13.run(Unknown Source) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) I can't see that I've missed anything in the setup process, according to the instructions it should basically just work out of the box. Any ideas as to why this might fail?

    Read the article

  • Mutual SSL Client Authentication

    - by nordisk
    Hi, I'm trying to achieve mutual SSL client authentication but without much success so far. Let me explain my scenario first: I have a client certificate issued by an intermediate CA whose certificate in turn was issued by a root CA (the intermediate and root CAs are within the company's network). This is the certificate I am including as part of my call to the server (using the HttpWebRequest object). The server has imported my client certificate and it is one of the certificates presented to me. An important thing to note is that the server does not trust the intermediate CA or the root for that matter. What we're trying to achieve is authentication against the certificate directly, i.e. mutual authentication using my client certificate. The error I'm getting is: "The request was aborted: Could not create SSL/TLS secure channel." From my trace logs I also get the following: System.Net Information: 0 : [3380] SecureChannel#34868631 - We have user-provided certificates. The server has specified 2 issuer(s). Looking for certificates that match any of the issuers. System.Net Information: 0 : [3380] SecureChannel#34868631 - Left with 0 client certificates to choose from. One of the certificates presented to us from the server is the same as our client certificate but the matching between them seems to fail. It looks like it's trying to verify the issuer. Now to make things even more interesting: If the server trusts and sends back the intermediate CA then everything works fine! (This is not an option for the production environment though I'm told) Using jmeter to test the request works fine too. I can only assume that Java's SSL handshake implementation is somewhat different. So it really comes down to this: Do you need to implement mutual SSL authentication differently from normal client SSL authentication? Any ideas or comments would be greatly appreciated.

    Read the article

  • Use MTOM/streaming from C# calling a webservice in java exposed via jaxws

    - by raticulin
    We have this webservice created with jax-ws @WebService(name = "Mywebser", targetNamespace = "http://namespace") @MTOM(threshold = 2048) @SOAPBinding(style = SOAPBinding.Style.DOCUMENT, use = SOAPBinding.Use.LITERAL, parameterStyle = SOAPBinding.ParameterStyle.WRAPPED) public class Mywebser { @WebMethod(operationName = "doStreaming", action = "urn:doStreaming") @WebResult(name = "return") public ResultInfo doStreaming(String username, String pwd, @XmlMimeType("application/octet-stream") DataHandler data, boolean overw){ ... } } The generated client side looks like this: @WebMethod(action = "urn:doStreaming") @WebResult(targetNamespace = "") @RequestWrapper(localName = "doStreaming", targetNamespace = "http://namespace", className = "com.mypack.client.doStreaming") @ResponseWrapper(localName = "doStreamingResponse", targetNamespace = "http://namespace", className = "com.mypack.client.doStreamingResponse") public ResultInfo doStreaming( @WebParam(name = "arg0", targetNamespace = "") String arg0, @WebParam(name = "arg1", targetNamespace = "") String arg1, @WebParam(name = "arg2", targetNamespace = "") DataHandler arg2, @WebParam(name = "arg3", targetNamespace = "") boolean arg3); By using it this way it uses streaming properly (verified we can pass an argument of 80mb when the jvm had less allowed. MywebserService serv = ...; Mywebser wso = serv.getMywebserPort(new MTOMFeature()); Map<String, Object> ctxt = ((BindingProvider) wso).getRequestContext(); ctxt.put(JAXWSProperties.HTTP_CLIENT_STREAMING_CHUNK_SIZE, 8192); DataHandler dataHandler = new DataHandler(new FileDataSource("c:\\temp\\A.dat")); arcres = wso.doStreaming("a", "b", dataHandler, true); We generate a clienet for .net, with VS2008, using "Add Web Reference", we get this C# code: [System.Web.Services.Protocols.SoapDocumentMethodAttribute("urn:doStreaming",RequestNamespace="http://namespace",ResponseNamespace="http://namespace",Use=System.Web.Services.Description.SoapBindingUse.Literal,ParameterStyle=System.Web.Services.Protocols.SoapParameterStyle.Wrapped)] [return: System.Xml.Serialization.XmlElementAttribute("return",Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] public ResultInfo doStreaming( [System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string arg0, [System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string arg1, [System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified,DataType="base64Binary")] byte[] arg2, [System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] bool arg3) Apparently this is not using streaming? The type base64Binary of arg2 seems not the right one? In java it's a DataHandler. By testing it with low memory on the java side we can see it is not using streaming as it fails with OOM. Does someone knows if this is possible, and if so how? Our environment: server: jdk1.6, jaxws 2.1.7 client: C# 2.0, visual studio 2008

    Read the article

  • .Net Windows Service Throws EventType clr20r3 system.data.sqlclient.sql error

    - by William Edmondson
    I have a .Net/c# 2.0 windows service. The entry point is wrapped in a try catch block yet when I look at the server's application event log I seem a number of "EventType clr20r3" errors that are causing the service to die unexpectedly. The catch block has a "catch (Exception ex)". Each sql commands is of the type "CommandType.StoredProcedure" and are executed with SqlDataReader's. These sproc calls function correctly 99% of time and have all been thoroughly unit tested, profiled, and QA'd. I additionally wrapped these calls in try catch blocks just to be sure and am still experiencing these unhandled exceptions. This only in our production environment and cannot be duplicated in our dev or staging environments (even under heavy load). Why would my error handling not catch this particular error? Is there anyway to capture more detail as to the root cause of the problem? Here is an example of the event log: EventType clr20r3, P1 RDC.OrderProcessorService, P2 1.0.0.0, P3 4ae6a0d0, P4 system.data, P5 2.0.0.0, P6 4889deaf, P7 2490, P8 2c, P9 system.data.sqlclient.sql, P10 NIL. Additionally The Order Processor service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

    Read the article

  • logparser not matching on a LIKE pattern

    - by user79339
    Hi I seem to have the strangest problem. I am using logparser to search an event log for some text that I know is there (i copied and pasted the string from the event into the sql search string). But the sql LIKE statement is returning a empty results. But other LIKE statments seem to be working file. I have even tried using two '%' symbols in case the shell was trying to replace the search pattern with an environment variable '%%NavigationOccuredEventHandler%%', escaping the % with a \ and with a ' but all these just give me "No valid LIKE mask" error My logparser command - C:\Program Files\Log Parser 2.2LogParser.exe "select * from D:\Temp\07i132ppa1_app.evt where Message like '%NavigationOccuredEventHandler%' " -i:EVT -o:Datagrid The Entry in event log (found using "Select * from D:\Temp\07i132ppa1_app.evt" and doing a copy paste of relevant row) - 'D:\Temp\07i132ppa1_app.evt 5976788 2010-03-09 11:53:23 2010-03-09 11:53:23 2 1 Error event 0 None ICP Timestamp: 9/03/2010 1:53:23 AM Message: Error # 068464030040-07I132PPA1 System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.NullReferenceException: Object reference not set to an instance of an object. at ClientRegistration.Controller.ContactDetailsController.NavigationOccuredEventHandler(Object sender, NavigateEventArgs e) at Microsoft.ApplicationBlocks.UIProcess.UIPManager.NavigateEventHandler.Invoke(Object sender, NavigateEventArgs e) at Microsoft.ApplicationBlocks.UIProcess.UIPManager.InvokeEventHandlers(State state) in . . . Truncated for brevity ' output Statistics: Elements processed: 240993 Elements output: 0 Execution time: 59.47 seconds But if i searched for the pattern '%object reference not set%' it works fine, returns results. I copied and pasted the string into a dummy sql table and ran the sql query there and it works fine. Just doesn't seem to work in logparser. Very baffling. Any help would be much appreciated

    Read the article

  • SFx Server Did Not Reply

    - by user2956426
    have the following problem : For a project I've tentatively created a Silverlight 5 web application and successfully integrated a WCF service. So far so good , in the Visual Studio 2012 environment everything works as intended. The data is processed. Now I wanted to see if it all works well on IIS 7.5 . When I called the test page and spoke to the WCF service Error 405 - Method not allowed occures. After searching I solved the problem with a module allocation for *.svc .                       So, then comes the error 405 although no longer , and the service also reports the status 200 - OK . Unfortunately, the application still does not work . Now this error is reported in Silverlight : The server doenst reply a meaningful response , which may be caused by a non- matching agreement , a premature session shutdown or an internal server error . No idea what I must adjust or change now. Have read on one of the few sites on the topic that is ClientConfig blame, as they would continue as a reference for the *.xap file is valid after publishing , and not used WebConfig ... But according to the error message above, it seems to be problem in the ServiceModel.dll ... Please , can anyone help me resolve this error? Thank you, Roland I uploaded my project. Maybe someone can solve the issues in there or can check my config-files. http://www.file-upload.net/download-8261762/CiFls.zip.html

    Read the article

< Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >