Search Results

Search found 13697 results on 548 pages for 'linking errors'.

Page 487/548 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• How to Setup Ubuntu Mail Server with Google Apps?

  - by Apreche

  I have a domain, let's call it foobar.com. All of the MX records for foobar.com point to Google's mail servers because I am using Google Apps for your domain to manage it. It's great because everyone gets all the advantages of GMail, but our e-mail addresses aren't @gmail.com. I also have a server. Primarily, it's a web server, but it also serves other things. One of the things it serves is the web site for foobar.com and also sites for various virtual hosts such as shop.foobar.com and forum.foobar.com. The server is running Ubuntu 8.04, because I like using LTS releases in production. The thing is, there are various applications running on the server that need the ability to send out emails. Various applications, like the cron jobs, send me e-mails in case of errors. Some of the web applications need to send e-mail to users when they forget their passwords, to confirm new registered users, etc. Lastly, it's nice to be able to send e-mail from the command line using the mail command, or mutt. How can I setup the mail on the web server to go through the Google apps mail servers? I don't need the web server to receive mail, though that would be cool. I do need it to be able to send mail as any legitimate address @foobar.com. That way the forum application can send mails with [email protected] in the from field, and the ecommerce application will have [email protected] in the from field. Also, by sending the mail through the Google servers, we can avoid a lot of the problems with the e-mails being blocked by various spam filters on the web. Google's SMTP servers are trusted a lot more than mine would be. I'm pretty good with administering Linux systems, but I am absolutely brain dead when it comes to e-mail. I need step by step directions from beginning to end on how to set this up. I need to know every thing to install, and every single change to the configuration files that is necessary. I have tried following various howtos and guides in the past, but none of them were quite right. Either they didn't work at all, or they offered a configuration that is not what I wanted. Please help. Thanks.

  Read the article

• Exchange IMAP4 connector - Error Event ID 2006

  - by MikeB

  Hi, A couple of users in my organisation use IMAP4 to connect to Exchange 2007 (Update rollup 9 applied) because they prefer Thunderbird / Postbox clients. One of the users is generating errors in the Application Log as follows: An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 1523, user "*******", folder *********, subject: "******", date: "*******" into MIME format. Microsoft.Exchange.Data.Storage.ConversionFailedException: Message content has become corrupted. ---> System.ArgumentException: Value should be a valid content type in the form 'token/token' Parameter name: value at Microsoft.Exchange.Data.Mime.ContentTypeHeader.set_Value(String value) at Microsoft.Exchange.Data.Storage.MimeStreamWriter.WriteHeader(HeaderId type, String data) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) --- End of inner exception stack trace --- at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeAttachment(MimePartInfo part, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeParts(List`1 parts, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.<>c__DisplayClass2.<WriteMimePart>b__0() at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, String exceptionString, CtsCall ctsCall) at Microsoft.Exchange.Data.Storage.ImapItemConverter.WriteMimePart(ItemToMimeConverter converter, MimeStreamWriter writer, OutboundConversionOptions options, MimePartInfo partInfo, MimeFlags conversionFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream, UInt32[] indices) From my reading around it seems that the suggestion is to ask users to log in to Outlook / OWA and view the messages there. However, having logged in as the users myself, the messages cannot be found either through searching or by browsing the folder detailed in the log entry. The server returns the following error to the client: "The message could not be retrieved using the IMAP4 protocol. The message has not been deleted and may be accessible using either Microsoft Outlook or Microsoft Office Outlook Web Access. You can also try contacting the original sender of the message to find out about the contents of the message. Retrieval of this message will be retried when the server is updated with a fix that addresses the problem." Messages were transferred in to Exchange by copying them from the old Apple Xserve, accessed using IMAP. So my question, finally: 1. Is there any way to get the IMAP Exchange connector to rebuild its cache of messages since it doesn't seem to be pulling them directly from the MAPI store? 2. Alternatively, if there is no database, any ideas on why these messages don't appear in Outlook or OWA would be gratefully received. Many thanks, Mike

  Read the article

• DPM 2010 PowerShell Script to Easily Restore Multiple Files

  - by bmccleary

  I’ve got what I thought would be a simple task with Data Protection Manager 2010 that is turning out to be quite frustrating. I have a file server on one server and it is the only server in a protection group. This file server is the repository for a document management application which stores the files according to the data within a SQL database. Sometimes users inadvertently delete files from within our application and we need to restore them. We have all the information needed to restore the files to include the file name, the folder that the file was stored in and the exact date that the file was deleted. It is easy for me to restore the file from within the DPM console since we have a recovery point created every day, I simply go to the day before the delete, browse to the proper folder and restore the file. The problem is that using the DPM console, the cumbersome wizard requires about 20 mouse clicks to restore a single file and it takes 2-4 minutes to get through all the windows. This becomes very irritating when a client needs 100’s of files restored… it takes all day of redundant mouse clicks to restore the files. Therefore, I want to use a PowerShell script (and I’m a novice at PowerShell) to automate this process. I want to be able to create a script that I pass in a file name, a folder, a recovery point date (and a protection group/server name if needed) and simply have the file restored back to its original location with some sort of success/failure notification. I thought it was a simple basic task of a backup solution, but I am having a heck of a time finding the right code. I have seen the sample code at http://social.technet.microsoft.com/wiki/contents/articles/how-to-use-a-windows-powershell-script-to-recover-an-item-in-data-protection-manager.aspx that I have tried to follow, but it doesn’t accomplish what I really want to do (it’s too simplistic) and there are errors in the sample code. Therefore, I would like to get some help writing a script to restore these files. An example of the known values to restore the data are: DPM Server: BACKUP01 Protection Group: Document Repository Data Protected Server: FILER01 File Path: R:\DocumentRepository\ToBackup\ClientName\Repository\2010\07\24\filename.pdf Date Deleted: 8/2/2010 (last recovery point = 8/1/2010) Bonus Points: If you can help me not only create this script, but also show me how to automate by providing a text file with the above information that the PowerShell script loops through, or even better, is able to query our SQL server for the needed data, then I would be more than willing to pay for this development.

  Read the article

• Weird IIS with Windows Authentication + IE problem

  - by Paulius Maruška

  I have a website running on IIS and using Windows Authentication. All users that are configured to get access to the site are form a AD domain (not local users). In the properties of a Website, I have set to use the AD domain as the realm. Now, when using Firefox, Safari or Chrome - Everything is fine. When the user tries to open the site, he get's the login box. he enters simply "username" and "password" (let's pretend that it's an actual login and password :P) and he get's into the site. When using IE, however, things get nasty. When the user tries to open the site - he get's the login box. User enters the "username" and "password" again, but those get rejected! And when the second time login box pops up - it has the username filled in as "web-server-domain-name\username" which is wrong, because web-server-domain-name is not the domain where all users reside (it's "ad-domain"). I've spent days trying to figure out what's going on... Note, that if I manually enter "ad-domain\username" - I get accepted into the site without problems. So, my guess is that IE sends wrong username if domain is not specified. Anyway, IE is the only browser that triggers this behavior! Is it possible to do a server-side fix? Maybe it's possible to somehow auto-map the users to AD users? If it's not solvable server-side - is there a client-side fix for this? Thank you. PS: I'm more of a programmer than a sys-admin, so configuring servers isn't the strong side of mine... :P UPDATE: @Evan: Yes, "Digest authentication for Windows domain servers" is also enabled. @Eric: IIS version is 6.0. The authentication methods enabled are: Integrated and digest - all other methods are disabled. As for the security log. I looked at it, when doing "username" and "password" login in Chrome/Firefox and when doing "ad-domain\username" and "password" login from IE - the generated log messages are the same (I see no difference, anyway). When entering "username" and "password" I don't see any errors in the security (or any other) log, so can't tell what method it's trying to use. UPDATE 2: As suggested by Eric in the comments - I played around with Fiddler... While playing with it, I noticed, that when "username" and "password" is entered in FF and IE - the "Authorization" header value (encrypted) sent by IE is longer (almost two times) than one sent by FF. I tried to disable Windows Integrated authentication and only leave the Digest enabled - that fixed the problem (meaning, IE used the right realm just like other browsers), but that caused bazillion other problems with my site, because with Digest - user impersonation on the server doesn't work (that causes problems, when connecting to database etc). Any ideas?

  Read the article

• Raid1 with active and spare partition

  - by Daniel Baron

  I am having the following problem with a RAID1 software raid partition on my Ubuntu system (10.04 LTS, 2.6.32-24-server in case it matters). One of my disks (sdb5) reported I/O errors and was therefore marked faulty in the array. The array was then degraded with one active device. Hence, I replaced the harddisk, cloned the partition table and added all new partitions to my raid arrays. After syncing all partitions ended up fine, having 2 active devices - except one of them. The partition which reported the faulty disk before, however, did not include the new partition as an active device but as a spare disk: md3 : active raid1 sdb5[2] sda5[1] 4881344 blocks [2/1] [_U] A detailed look reveals: root@server:~# mdadm --detail /dev/md3 [...] Number Major Minor RaidDevice State 2 8 21 0 spare rebuilding /dev/sdb5 1 8 5 1 active sync /dev/sda5 So here is the question: How do I tell my raid to turn the spare disk into an active one? And why has it been added as a spare device? Recreating or reassembling the array is not an option, because it is my root partition. And I can not find any hints to that subject in the Software Raid HOWTO. Any help would be appreciated. Current Solution I found a solution to my problem, but I am not sure that this is the actual way to do it. Having a closer look at my raid I found that sdb5 was always listed as a spare device: mdadm --examine /dev/sdb5 [...] Number Major Minor RaidDevice State this 2 8 21 2 spare /dev/sdb5 0 0 0 0 0 removed 1 1 8 5 1 active sync /dev/sda5 2 2 8 21 2 spare /dev/sdb5 so readding the device sdb5 to the array md3 always ended up in adding the device as a spare. Finally I just recreated the array mdadm --create /dev/md3 --level=1 -n2 -x0 /dev/sda5 /dev/sdb5 which worked. But the question remains open for me: Is there a better way to manipulate the summaries in the superblock and to tell the array to turn sdb5 from a spare disk to an active disk? I am still curious for an answer.

  Read the article

• graphic error on console

  - by Christian Elsner

  I have Linux on an embedded system. There is no graphic system, but I still have graphic errors. For example, if I type: ifconfig eth2 hw ether 00:0e:8c:d0:59:d2 I see: ifconfig eth hw ether 00:0e:8:2:2 If I type Enter, it accepts the command I typed, so it's just a matter of displaying. Everything is fine, when I log in via SSH. Anyone any ideas, what could be the cause or where to look at? Output of lspci: 00:00.0 Host bridge: Intel Corporation 3100 Chipset Memory I/O Controller Hub 00:00.1 Unassigned class [ff00]: Intel Corporation 3100 DRAM Controller Error Reporting Registers 00:01.0 System peripheral: Intel Corporation 3100 Chipset Enhanced DMA Controller 00:02.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A 00:03.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A1 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:01.0 Network controller: Siemens Nixdorf AG Device 4003 (rev 02) 03:01.1 Unassigned class [ff00]: Siemens Nixdorf AG Device 4003 (rev 02) 03:02.0 Ethernet controller: Siemens Nixdorf AG Device 4047 (rev 01) 03:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 03:04.0 Unassigned class [ff00]: Siemens Nixdorf AG Device 4057 (rev 01) 04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 05:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 44) 06:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 07:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 07:01.0 USB Controller: NEC Corporation USB (rev 43) 07:01.1 USB Controller: NEC Corporation USB (rev 43) 07:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04) The whole thing is running on an Intel Core 2 Duo U2500

  Read the article

• Package problems after upgrade

  - by Dan

  I installed a new upgrade on ubuntu which seemed to fail near the end. Now I'm being told that an error has occurred and to please run apt-get to see what's wrong. After some further tries with that I eventually gave up. It seems there's a left over latex package(?) somewhere and I can't seem to get rid of or fix it. Here's an example: blank@ubuntu:~$ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: tex-common : Breaks: texlive-common (< 2010) but 2009-15 is installed texlive-base : Depends: texlive-binaries (>= 2012.20120516) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-doc-base : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-extra-utils : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed texlive-font-utils : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-generic-recommended : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-base : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-base-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-extra : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-extra-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-recommended : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-latex-recommended-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-luatex : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pictures : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pictures-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pstricks : Depends: texlive-binaries (>= 2012-0) but 2009-11ubuntu2 is installed Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed texlive-pstricks-doc : Depends: texlive-common (>= 2012.20120516) but 2009-15 is installed zlib1g : Breaks: texlive-binaries (< 2009-12) but 2009-11ubuntu2 is installed zlib1g:i386 : Breaks: texlive-binaries (< 2009-12) but 2009-11ubuntu2 is installed E: Unmet dependencies. Try using -f. I've seen similar errors on the site here, but not close enough that i could get it fixed. Any help would be great, Thanks

  Read the article

• How to conform to update-rc.d with LSB standard?

  - by user34881

  This is a migrated question from stackoverflow, as I was told, this is the place for it to be. http://stackoverflow.com/questions/2263567/how-to-conform-to-update-rc-d-with-lsb-standard I have set up a simple script to back up some directories. While I haven't had any problems setting up the functionality, I'm stuck with adding the script to rcX.d dir's using update-rc.d. My script: #! /bin/sh ### BEGIN INIT INFO # Provides: backup # Required-Start: backup # Required-Stop: # Should-Stop: # Default-Start: 0 6 # Default-Stop: # Description: Backs up some dirs ### END INIT INFO check_mounted() { # Check if HD is mounted } do_backup() { if check_mounted; then # Some rsync statements. fi } case "$1" in start) do_backup ;; restart|reload|force-reload) echo "Error: argument '$1' not supported" >&2 exit 3 ;; stop|"") # No-op ;; *) echo "Usage: backup [start]" >&2 exit 3 ;; esac : Using update-rc.d backup start 10 0 6 . I get the following warnings and errors: update-rc.d: warning: backup start runlevel arguments (none) do not match LSB Default-Start values (0 6) update-rc.d: warning: backup stop runlevel arguments (0 6.) do not match LSB Default-Stop values (none) update-rc.d: error: start|stop arguments not terminated by "." The syntax I try to use is the following: update-rc.d [-n] <basename> start|stop NN runlvl [runlvl] [...] . Google wasn't that helpful at finding a solution. How can I correctly set up a script and add it via update-rc.d? I'm using Ubuntu 9.10. UPDATE Using update-rc.d backup start 10 0 6 . stop 10 0 . the error disappears. The warnings about default values persists: update-rc.d: warning: backup start runlevel arguments (none) do not match LSB Default-Start values (0 6) update-rc.d: warning: backup stop runlevel arguments (0 6 0 6) do not match LSB Default-Stop values (none) It even is added to the appropiate rcX-dirs but it still does not get executed...

  Read the article

• Seeking past end of file causes Apache hang, and it never restarts.

  - by talkingnews

  I've actually solved my problem with a better script, but I'm still left wondering why Apache2 hung completely - this is an out-of-the-box ISPCONFIG 3.03 install, everything bang up to date, running perfectly. Until... The troublesome but innocent-looking script: $fp = fopen("/var/log/ispconfig/cron.log", "r"); fseek($fp, -5000, SEEK_END); $line_buffer = array(); while (!feof($fp)) { $line = fgets($fp, 1024); $line_buffer[] = $line; $line_buffer = array_slice($line_buffer, -10, 10); } foreach ($line_buffer as $line) { echo $line; } You get the idea, just a script I found on a forum somwehere. I did this for various logs, since it's a nice easy window on what's occurring (in a protect dir, of course!). One day, the logs having grown large an me having sorted all my cron, scripting and mail queue errors, I thought I was time to start afresh. updated, rebooted, archived and deleted the logs. When I ran my script a couple of hours later, it hung. And hung. 8 minutes I waited. Chrome timed the page out, of course, but the server never came back to life. htop showed /usr/sbin/apache2 -k restart using 100% CPU. Never came back until I did a service apache2 restart. Ran fine, as soon as I hit that logfile again...dead. So, I worked out it was the logfile script, and I worked out that seeking beyond the end of the file wasn't good, and I found a better script http://www.php.net/manual/en/function.fseek.php#90450 But what I'm left wondering is... why didn't something restart or kill the process? How was one hanging page able to bring down the whole server? It's running suphp. I say "out of the box", I've tweaked mysql and apache to fork and reserve sensible amounts of processes for the 512Mb RAM the VPS has, and it'll handle multiple refreshes of large pages, and hadn't hung before. Any ideas how I'd avoid this? Google isn't my friend in this instance beyond the reccs. above about number of processes vs RAM available.

  Read the article

• Windows Server 2008 Software Raid 5 - Data integrity issues

  - by Fopedush

  I've got a server running Windows Server 2008 R2, with a (windows native) software raid-5 array. The array consists of 7x 1TB Western Digital RE3 and RE4 drives. I have offline backups of this array. The problem is this: I noticed a few days ago after copying a large file to the disk that there was an integrity issue with that file - it was a ~12GB file that I had downloaded via uTorrent. After moving it to the raid array, I used uTorrent to relocate the download location, and performed a re-check so I could seed it from that location. The recheck found that only 6308/6310 chunks of the copied file were intact. My next step was to write a quick powershell script that would copy files to the array, while performing a SHA1 hash of the original and resultant files and comparing them. Smaller files (100-1000MB) copied over just fine. When I started copying larger data (~15GB), I found that the hash check failed about 2/3rds of the time. The corrupt files had very, very small inconsistencies - less than .01%. I further eliminated the possibility of networking or client issues by placing this large file on the C:\ of the server, and copying it repeatedly from there to the array, seeing similar results. Copying the data via explorer, powershell, or the standard windows command prompt yield the same results. None of the copies fail or report any problems. The raid array itself is listed as healthy in disk management. After a few experiments, I shut down the server and ran memtest overnight. No errors were detected. A basic run of chkdsk found no problems, but I did not use the /R flag, as I was unsure how that might affect a software raid-5 volume. I next ran Crystal Disk Info to check the smart data on the drives - but found that CDI only detected 5 out of 7 of the disks in the array. I have no idea why. Nevertheless, CDI shows the following "caution" flags on a single one of the drives: 05 199 199 140 000000000001 Reallocated Sectors Count C5 200 200 __0 000000000001 Current Pending Sector Count Which is a little bit alarming, but I don't really know what to do with the information. I hardly feel like one reallocated sector could be causing this. At this point, I'm looking for some guidance on what to do next. I need to determine the cause of this issue, but I'm hesitant to run chkdsk /R or any bootable disk health checkers because I'm afraid they might break the array. I've considered triggering a re-sync of the array, but I'm not actually sure how to do that without doing something silly like manually dropping a disk and then restoring it. Any advice that could help me ferret out the precise cause of this issue would be greatly appreciated.

  Read the article

• Thinkpad speaker turns mute - Linux Codec issue?

  - by Curlew

  At some point a few days ago the speakers on my Lenovo Thinkpad T410 (Model number: 2537A11) suddenly stopped working randomly. This error happens every time I watch a video or listen to a music file. The sound just abruptly stops. At the moment, I can't produce a single sound no matter what I do. I am using Debian GNU/Linux on this laptop and there doesn't appear to be anything else wrong (the fan is working, no abnormal heat (staying around ~40°C), no other obvious errors or problems). Here is the output of a nice program someone pointed me to: martin@martin:~/Downloads$ sudo python run.py --monitor Using temporary directory: /dev/shm/hda-analyzer You may remove this directory when finished or if you like to download the most recent copy of hda-analyzer tool. Downloading file hda_analyzer.py Downloading file hda_guilib.py Downloading file hda_codec.py Downloading file hda_proc.py Downloading file hda_graph.py Downloading file hda_mixer.py Downloaded all files, executing hda_analyzer.py Watching 1 cards ====================================== Sound is working normally and then it stops and the following lines appear: Diff for codec 0/0 (0x14f15069): --- +++ @@ -164,17 +164,17 @@ Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT - Power: setting=D0, actual=D0 + Power: setting=D3, actual=D3 Connection: 2 0x10* 0x11 Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE And now there is also an error in the dmesg output hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. I changed the bdl_pos_adj to various numbers (-1, 0, 64, 1024) and either there is no change at all or dmesg reports that the adjustment is too big. I wonder if this bdl_pos_adj is the real reason for the error. Here is my hardware information provided by alsa-info.sh website. Okay, i did some serious testing and even installed Windows and now i officially conclude that this is a hard-ware related issue with my Laptop speakers. Reason: The error occurs in my installed Debian Linux, an Ubuntu Live distribution and Windows XP No error-message appears in all of the OS. The sound just keeps running and i can't hear a thing. I tested different setups, including OSS, ALSA and the pulseaudio server on top If i use my new usb-headphones i can hear sound all the time without any sudden silences. So obviously, although hard to believe, my laptop speakers are not okay (never heard of similar cases). I'll award the bounty to anyone who can point me to good tutorials or the procedure how to exchange my T410 speakers (i still have warranty. The laptop was bought in Germany, but now i am in Denmark). Or to someone who can explain me the output from hda-analyzer (big log above).

  Read the article

• Failed to start up after upgrading software in ubuntu 10.10

  - by Landy

  I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64.

  Read the article

• Sarg report error

  - by amyassin

  I have a proxy server that runs Ubuntu Server 11.10, Squid 2.7.STABLE9. I installed sarg (version 2.3.1 Sep-18-2010) to generate reports using the ordinary apt-get install, and added a cron job to generate a report of the day every 5 minutes (that will overwrite the 5-minutes-older one): */5 * * * * /root/proxy_report.sh And the content of /root/proxy_report.sh is: #!/bin/bash /usr/bin/sarg -nd `date +"%d/%m/%Y"` > /dev/null 2>&1 And I added another cron job to generate a full report every hour at :32 (not to collide with the 5 minutes job): */32 * * * * /root/proxy_report_full.sh And the content of /root/proxy_report_full.sh is : #!/bin/bash /usr/bin/sarg -n > /dev/null 2>&1 And I added a small script to remove the yesterday full report (the full report that ends in yesterday that won't be overwritten by the new today full report) in /etc/rc.local to run at startup: /usr/bin/rm_yesterday.sh &>> /var/log/rm_yesterday Where /usr/bin/rm_yesterday.sh: #!/bin/bash find /var/www/sarg/ | grep `date -d Apr1 +"%Y%b%d"`-* | grep -v `date +"%Y%b%d"` | xargs rm -rf * Apr1 is the starting date of the proxy... ** I've placed it in /usr/bin to be mounted early at startup... That arrangement went OK for about a month and a half, except for one time I noticed some errors and reports wasn't generated, and fixed that by making an offset (the two minutes in 32 of the second cron job). However, it then started not to generate reports anymore. By manually trying to generate it it gives the following error: root@proxy-server:~# sarg -n SARG: getword_atoll loop detected after 3 bytes. SARG: Line="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: Record="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: searching for 'x2f' SARG: getword backtrace: SARG: 1:sarg() [0x8050a4a] SARG: 2:sarg() [0x8050c8b] SARG: 3:sarg() [0x804fc2e] SARG: 4:/lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x129113] SARG: 5:sarg() [0x80501c9] SARG: Maybe you have a broken date in your /var/log/squid/access.log file When I looked to /var/log/squid/ folder, I noticed that it contains some rotated logs: root@proxy-server:~# ls /var/log/squid/ access.log access.log.1 cache.log cache.log.1 store.log store.log.1 So maybe sarg installed logrotate with it? Or it comes with the standard Ubuntu? I don't remember I installed it manuallly. The question is: What could've gone wrong? Does it have something to do with rotating the log? How can I trace the error and start generating reports again?

  Read the article

• Wirelss card not being detected in backtrack 5

  - by Jesse Nelson

  I just installed backtrack 5 and I am unable to detect my wireless card. iwconfig doesn't list my interface. I can see that the hardware is present in lspci -vnn (see below) but I can't get the interface detected. I have tried to reinstall the compat-wireless package but I get errors during the build (see below) I have done a ton of researching and I keep hitting a brick wall, mostly because the wiki for backtrack is down and I can't find any good resources. Does anyone know how to fix the issue? Also, does anyone no how I can scan the hardware to determine what NIC is assigning my interface? If I can figure out the interface name I think I can set it up manually by putting up the link and using wireless-tools to manually configure the connection, this is what I had to do in arch on my mac. As stated the wiki for backtrack is down and I can't find any help on the issue. I tried to do the full kernel upgrade suggested in my software update but after the update was complete and I logged back in I had a new log in manager and the only thing I was able to log into was window managers. However, after this update my wireless was working fine. Please help I am new to Linux and the wiki is down, I have nowhere else to turn. Forgot to mention I am using the KDE version, not Gnome. Thanks in advance for any help or support. Attempt at make: root@bt:/usr/src/compat-wireless-3.3-rc1-2# make /usr/src/compat-wireless-3.3-rc1-2/config.mk:254: "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m." make -C /lib/modules/2.6.38/build M=/usr/src/compat-wireless-3.3-rc1-2 modules make: *** /lib/modules/2.6.38/build: No such file or directory. Stop. make: *** [modules] Error 2 lspci output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn -i net lspci: I/O error at net, line 0 root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn 02:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:0032] (rev ff) (prog-if ff) !!! Unknown header type 7f ( This is the problem but I can't find the solution) Kernel modules: ath9k iwconfig output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• Got Hacked. Want to understand how.

  - by gaoshan88

  Someone has, for the second time, appended a chunk of javascript to a site I help run. This javascript hijacks Google adsense, inserting their own account number, and sticking ads all over. The code is always appended, always in one specific directory (one used by a third party ad program), affects a number of files in a number of directories inside this one ad dir (20 or so) and is inserted at roughly the same overnight time. The adsense account belongs to a Chinese website (located in a town not an hour from where I will be in China next month. Maybe I should go bust heads... kidding, sort of), btw... here is the info on the site: http://serversiders.com/fhr.com.cn So, how could they append text to these files? Is it related to the permissions set on the files (ranging from 755 to 644)? To the webserver user (it's on MediaTemple so it should be secure, yes?)? I mean, if you have a file that has permissions set to 777 I still can't just add code to it at will... how might they be doing this? Here is a sample of the actual code for your viewing pleasure (and as you can see... not much to it. The real trick is how they got it in there): <script type="text/javascript"><!-- google_ad_client = "pub-5465156513898836"; /* 728x90_as */ google_ad_slot = "4840387765"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> Since a number of folks have mentioned it, here is what I have checked (and by checked I mean I looked around the time the files were modified for any weirdness and I grepped the files for POST statements and directory traversals: access_log (nothing around the time except normal (i.e. excessive) msn bot traffic) error_log (nothing but the usual file does not exist errors for innocuous looking files) ssl_log (nothing but the usual) messages_log (no FTP access in here except for me)

  Read the article

• Windows Server 2003 Standard R2 CD 1 cannot boot: freeze at No Emulation

  - by TGP1994

  Hi everyone. I've been interested in the Windows Server line of OSes, so since I apply for DreamSpark, I thought I'd go download it and try it. I just so happened to have an old desktop that I was using awhile ago for Windows XP, so I imaged the drive in preparation for it to be overwritten with the new OS. (This system has an Asus A7V8X-X motherboard, an AMD Athlon XP 2800+ processor, and 1GB of RAM.) I tried burning the first disk image on my newer desktop computer, running Windows XP, although the CD burner consistently failed at a particular track area from cd to cd, so it seemed like the burner was toast there. Fortunately, I had a laptop, so I transferred the images over to that, then burned the first disc there. First time around went great, and the burning program reported no errors. I then took the CD over to the computer that I was intending to install Server onto, set the BIOS to boot from the CD drive, then I booted it up. Like normal, after the POST, it printed "Boot from ATAPI CD-Rom: No Emulation", which I was used to seeing with bootable cds. I waited for the "Press any key to continue..." message that I had become so familiar with in windows discs, although I saw none. The computer sat there for about 5 seconds with the cd spinning, then it spun down like it was done reading it. Nothing else happened. No response from the keyboard. I tried again, same result. I then downloaded IMGBurn, and I put the burned cd into the laptop that burned it originally. I also downloaded a fresh image from the dreamspark site. I ran a verify session, and everything checked out. I later tried getting various DOS startup discs, then I tried booting the winnt binary, which supposedly initiates the installation process. Either the shells reported that not enough memory was available (since they would be running in low memory mode), or FreeDOS in particular would report Illegal instructions right away. Is the image corrupt at dreamspark, or am I doing something wrong?

  Read the article

• Trouble creating FTP in Server 2008

  - by Saariko

  I have been trying to create an FTP server on my new Server 2008. I have been following both (very detailed and highly published here guides) For setting up using IIS Manager http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/ and For anonymous FTP http://www.trainsignaltraining.com/windows-server-2008-ftp-iis7 I am able to log as an anonymous user. My need is to use a named user, so I need to use the IIS Manager. I get error 530 when trying to log as a user. Connected to 127.0.0.1. 220 Microsoft FTP Service User (127.0.0.1:(none)): ftpmanager 331 Password required for ftpmanager. Password: 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: Filename: Error: 530 End Login failed. ftp> I can not learn from this message anything. My password is set to: 1234 (so I don't think I make a mistake here - testing purposes only ofc) Thank you. Note - I went over other posts on SE that I read, and couldn't get the result: IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in. FTP Error 530, User cannot log in, home directory inaccessible. Having trouble setting up FTP server on Windows Server 2008 EDIT I think I found some errors with the physical path. Going to Basic settings, and Test Connection on the physical path, gave me the following error: The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that \$ has Read access to the physical path. Then test these settings again. I am not sure which/whom should get access to the Root folder !? I want to point out, I managed to login with a domain user (change authorization and authentication methods) but this is NOT the requested solution. I checked to make sure that the FTP, folders, access is working properly. I am bit lost here. ==== More tries: I have enabled another Allow rule for ALL Users. I still get the same error. It seems that it doesn't matter if i use a correct or wrong password, I still get Error 530.

  Read the article

• PHP-FPM performing worse than mod_php

  - by lordstyx

  Recently the website I maintain has been growing a lot and I saw the point coming where I'd want to switch from apache to nginx, because I kept on reading that it performs way better. Now I've done the switch, and I have to say, nginx is keeping up just fine. However, php-fpm is forming a problem. Where the php pages used to take 0.1 second to generate with the same load they now take around 3 seconds! Furthermore the error.log from nginx is being spammed with errors like: upstream timed out (110: Connection timed out) while connecting to upstream, client: ... I also tried using unix sockets instead, but those would complain about the following: connect() to unix:/tmp/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream I've fiddled with settings here and there but nothing seems to work. Changing the amount of pm.max_children doesn't seem to help a lot either, but with it's current amount at 350 it seems to be the lesser of all evil. The server that's being used has 3 GB RAM (not all of it is free due to a MySQL server also running) along with 2 dual-core processors (4 cores in total). Am I doing something majorly wrong with the settings here, or is the server simply not capable enough? EDIT: Here is the nginx server block server { listen 80; listen [::]:80 default ipv6only=on; root /var/www; index index.php index.html index.htm; server_name localhost; location / { try_files $uri $uri/ /index.html; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; deny all; } location = /50x.html { root /usr/share/nginx/www; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini try_files $uri = 404; # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } location ~ /\.ht { deny all; } } And the php-fpm pool: [www] user = www-data group = www-data listen = 127.0.0.1:9000 ;listen = /tmp/php5-fpm.sock listen.backlog = -1 pm = dynamic pm.max_children = 350 pm.start_servers = 200 pm.min_spare_servers = 10 pm.max_spare_servers = 350 pm.max_requests = 1536 rlimit_files = 65536 rlimit_core = unlimited chdir = /

  Read the article

• Alienware m15x (older model) BSOD investigation

  - by Crishu

  A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

  Read the article

• Ubuntu and Postfix Configuration Issues

  - by Obi Hill

  I recently installed postfix on Ubuntu Natty. I'm having a problem with the configuration. Firstly here is my postfix configuration file: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = $myorigin myhostname = mail.nairanode.com alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 mydestination = $myorigin, $myhostname, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #mynetworks_style = host # ADDITIONAL unknown_local_recipient_reject_code = 550 maximal_queue_lifetime = 7d minimal_backoff_time = 1000s maximal_backoff_time = 8000s smtp_helo_timeout = 60s smtpd_recipient_limit = 16 smtpd_soft_error_limit = 3 smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_$ # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.n$ # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_do$ # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes Here is also my /etc/postfix/aliases: # See man 5 aliases for format postmaster: root Here is also my /etc/mailname: nairanode.com I've also updated my hostname to nairanode.com However, when I run postalias /etc/postfix/aliases I get the following : postalias: warning: valid_hostname: invalid character 47(decimal): /etc/mailname postalias: fatal: file /etc/postfix/main.cf: parameter mydomain: bad parameter value: /etc/mailname Is there something I'm doing wrong?! I noticed that when I replace myorigin = /etc/mailname with myorigin = nairanode.com in my postfix config, I don't see any errors anymore after calling postalias. Is this a bug or something?!

  Read the article

• Spotlight Infinite Indexing issue (external data drive)

  - by Manca Weeks

  This is an external drive, formerly a boot drive which is now in use only to access music files (sibelius, audio, midi, live, logic etc.) without transferring the data into a new boot system, partly because of the issue I am about to describe, but mostly because the majority of the data is mainly there for archival purposes. The user is a composer and prominent musician and needs to be able to rehash the data at will. I have tried several things - here is a list: - make complete filesystem clone with antonio diaz's ddrescue - run Disk Warrior on copy, repair whatever errors occurred - wipe out all ACLs on entire drive - set all permissions to the same value - wide open 777 - remove any system data (applications, system files, including hidden files to the best of my knowledge) by selecting only non-system/app data and using Carbon Copy Cloner to put only the data of interest onto a newly formatted drive - transfer data to newly formatted drive folder by folder, resetting the spotlight index in between adding each to observe for issues (interesting here is that no issues occurred except for in Documents folder - when I transferred only the Documents folder to a newly formatted drive on its own - no trouble. It appears almost as thought it may not be the content but the quantity or specific combination of data that results in problems) - use DataRescue to transfer the data to yet another newly formatted drive to expose any missed hidden files Between each of the above steps I stopped Spotlight (search for anything beginning with md in Activity Monitor - All Processes and quitting it), deleted the .Spotlight-V100 directory from the affected drive. Restart Splotlight indexing by adding drive to Spotlight privacy list and removing it. In each case the same issue occurs - Spotlight begins indexing normally (or so it seems), then the index estimated time increases, usually to 4 hours remaining. This is where it gets stuck and continues to predict 4 hours remaining but never finishes. Sometimes I can't eject the drive and have to quit the md.. processes from Activity Monitor to be able to eject the drive without Force Eject. Once I disconnect the drive after the 4 hours remaining situation - if I reattach it, Spotlight forever estimates remaining time and never gets going again. So there it is. It is apparently not a filesystem issue, not a permissions issue and not tied to any particular piece of hardware or protocol (used USB and FW drives). I have tried this on several machines (3 to be precise) and in 10.5.8 and 10.6.5. Simply disabling Spotlight on this volume is not an option because the owner has no clue where things are as the data on the volume dates back to music projects and compositions from 2003 and before. He needs to be able to query for results. Anyone got any ideas? Thanks, M

  Read the article

• Recovering data from failed Raid configuration with 4 drives and two raid sets (Asus P6T / Intel ICH10r)

  - by user56365

  I've added the complete detailed version for my question below for those who can help, but want to quickly summarize my question first. I setup two Raid arrays using (4) WD Raptors, a striped set for the OS and 1+0 set for crucial data. After booting once out of the 50 times a cable fell out, the drive wasn't recognized in the array anymore. After trying to fix it, another drive did the same. I now have two drives remaining, luckily with the parity information. I know the striped set is gone, but I need the data on the other set. Can anyone recommend anything to recover the data, or fix the two drives that doesn't allow the raid controller to recognize the drives, even though they are listed on the utility screen as still apart of the configuration but that they are not found? More Details I recently upgraded to a ASUS P6T motherboard with an Intel ICH10R raid controller and changed my previous 4 drive raid array from strictly a Raid 1+0 set to a Raid 0 for the OS/Page/Scratch drive and a Raid 1+0 set for crucial data. I never had problems after upgrading with my configuration, even when a drive died and was replaced. I managed to rebuild the array fine. Unfortunately this time around, a cable came unattached and I booted my system up until the raid status screen with the degraded error. This shouldn't have been a problem, but after I attached the drive it was no longer recognized as a member in the array. Both drives actually show up as a non-member disk. I've spent a very, very long time online trying to find information or support and haven't had much luck. After spending time trying to scan the drive for errors, damaged partition info, etc.. another drive in the set decided it didn't want to be recognized as a part of the array. At this point, I have two out of the four drives still functioning, but the Raid 1+0 array went from degraded to failed and I must find a way to retrieve that data. I think the two drives still in the array have the parity information because they show up as OS (110GB),BACKUP(80GB) and OS:1(110GB),BACKUP(80GB) under windows data management. The other two are simply 74gb Raw unallocated Is it possible recover the data using those two drive only, and which tool would I use? Could it be a simple partition table or any other error that is repairable with hard drive utilities out there? I know the Raid 0 set is done for, but I would assume because the correct drives failed in a 1+0 config to save the data I can retrieve it some how.

  Read the article

• First time installing Linux/Apache - uanble to connect

  - by bob

  I's my first time installing Linux/Apache. I loaded CentOS and LAMPP on a machine attached to a LAN. Turned off http and mysql (because I didn't want conflict with LLAMPP) chkconfig httpd off chkconfig mysqld off then successfully LAMPP started with /opt/lampp/lampp start Starting XAMPP for Linux 1.7.3a... XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... XAMPP: Starting ProFTPD... XAMPP for Linux started. Problem: Unable to connect - Firefox can't establish a connection to the server at 179.16.51.36. I need some pointers as to where to look next. No errors in error_log file (just some warnings) I can ping server. httpd.conf looks like this: ServerRoot "/opt/lampp" Listen 80 ServerAdmin [email protected] ServerName 179.16.51.36 DocumentRoot "/opt/lampp/htdocs" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/opt/lampp/htdocs"> Options Indexes FollowSymLinks ExecCGI Includes Order allow,deny Allow from all </Directory> ErrorLog logs/error_log LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog logs/access_log common </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "/opt/lampp/cgi-bin/" </IfModule> <IfModule cgid_module> </IfModule> <Directory "/opt/lampp/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig etc/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddHandler cgi-script .cgi .pl AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> EnableMMAP off EnableSendfile off

  Read the article

• Localhost has just stopped working (using xampp)

  - by Joe Taylor

  I installed Xampp to use for local development of a Drupal site. Its been working fine out of the box until now. The main Xampp localhost welcome menu loads, however my subdirectory (localhost/drupal) doesn't. It just spins in the browser for ages and nothing happens. Just a blank screen. I've tried the edit people suggest in the hosts file but that hasn't work and I'm getting no errors so not sure what to do. Anyone have any ideas what might be wrong? PS I'm running Windows 7 edit: Log files: Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41 Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41 [Tue Nov 05 20:52:07.242454 2013] [ssl:warn] [pid 8432:tid 260] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:07.331459 2013] [core:warn] [pid 8432:tid 260] AH00098: pid file C:/xampp/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? [Tue Nov 05 20:52:07.820487 2013] [ssl:warn] [pid 8432:tid 260] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:07.898492 2013] [mpm_winnt:notice] [pid 8432:tid 260] AH00455: Apache/2.4.4 (Win32) OpenSSL/0.9.8y PHP/5.4.16 configured -- resuming normal operations [Tue Nov 05 20:52:07.898492 2013] [mpm_winnt:notice] [pid 8432:tid 260] AH00456: Server built: Feb 23 2013 13:07:34 [Tue Nov 05 20:52:07.898492 2013] [core:notice] [pid 8432:tid 260] AH00094: Command line: 'c:\xampp\apache\bin\httpd.exe -d C:/xampp/apache' [Tue Nov 05 20:52:07.905492 2013] [mpm_winnt:notice] [pid 8432:tid 260] AH00418: Parent: Created child process 7588 [Tue Nov 05 20:52:08.882548 2013] [ssl:warn] [pid 7588:tid 272] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:09.467582 2013] [ssl:warn] [pid 7588:tid 272] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:09.534585 2013] [mpm_winnt:notice] [pid 7588:tid 272] AH00354: Child: Starting 150 worker threads. Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41 Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41

  Read the article

• Galera install failure on Fedora 18

  - by ehime

  I've been trying to reinstall MariaDB and have been encountering multiple issues, $ yum install Mariadb-Galera-server Error: Package: MariaDB-Galera-server-5.5.29-1.i386 (mariadb) Requires: galera Available: galera-23.2.4-1.rhel5.i386 (mariadb) galera galera = 23.2.4-1.rhel5 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest there is a requirement that libssl.so.6 and libcrypto.ssl.6 are installed, these DO show up in my /lib64 and /lib though as linked items. /usr/lib -rwxr-xr-x 1 root root 1356700 Nov 23 2010 libcrypto.so.0.9.8e lrwxrwxrwx 1 root root 19 Jun 28 12:03 libcrypto.so.6 -> libcrypto.so.0.9.8e -rwxr-xr-x. 1 root root 394272 Mar 18 14:22 libssl.so.1.0.1e lrwxrwxrwx 1 root root 16 Jun 28 12:03 libssl.so.6 -> libssl.so.0.9.8e /usr/lib64 -rwxr-xr-x 1 root root 1849680 Mar 18 14:21 libcrypto.so.1.0.1e lrwxrwxrwx 1 root root 26 Jun 28 11:54 libcrypto.so.6 -> /lib64/libcrypto.so.1.0.1e -rwxr-xr-x 1 root root 421712 Mar 18 14:21 libssl.so.1.0.1e lrwxrwxrwx 1 root root 23 Jun 28 11:54 libssl.so.6 -> /lib64/libssl.so.1.0.1e So the deps SHOULD be met, trying to $ yum install galera returns this Resolving Dependencies --> Running transaction check ---> Package galera.i386 0:23.2.4-1.rhel5 will be installed --> Restarting Dependency Resolution with new changes. --> Running transaction check ---> Package galera.i386 0:23.2.4-1.rhel5 will be installed --> Finished Dependency Resolution No errors? but no install either .... ? lets try wget and rpm'ing the package instead I guess? $ wget https://launchpad.net/galera/2.x/23.2.4/+download/galera-23.2.4-1.rhel5.x86_64.rpm $ rpm -ivh galera-23.2.4-1.rhel5.x86_64.rpm This issues the dreaded error: Failed dependencies: libcrypto.so.6()(64bit) is needed by galera-23.2.4-1.rhel5.x86_64 libssl.so.6()(64bit) is needed by galera-23.2.4-1.rhel5.x86_64 But we saw above these packages are here =( Whats going on?? Is openssl not installed? $ yum install openssl Loaded plugins: langpacks, presto, refresh-packagekit Package 1:openssl-1.0.1e-4.fc18.x86_64 already installed and latest version Nothing to do Its there.... ??? wth Fedora?

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >