Search Results

Search found 13243 results on 530 pages for 'android camera'.

Page 489/530 | < Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496  | Next Page >

  • remote telnet and email

    - by Mustafa Ismail Mustafa
    This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

    Read the article

  • Copying SD Cards with "LaCie d2 Network"

    - by rjstelling
    The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

    Read the article

  • Allow access from outside network with dmz and iptables

    - by Ivan
    I'm having a problem with my home network. So my setup is like this: In my Router (using Ubuntu desktop v11.04), I installed squid proxy as my transparent proxy. So I would like to use dyndns to my home network so I could be access my server from the internet, and also I installed CCTV camera and I would like to enable watching it from internet. The problem is I cannot access it from outside the net. I already set DMZ in my modem to my router ip. My first guess is because i'm using iptables to redirect all inside network to use squid. And not allow from outside traffic to my inside network. Here is my iptables script: #!/bin/sh # squid server IP SQUID_SERVER="192.168.5.1" # Interface connected to Internet INTERNET="eth0" # Interface connected to LAN LAN_IN="eth1" # Squid port SQUID_PORT="3128" # Clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # Load IPTABLES modules for NAT and IP conntrack support modprobe ip_conntrack modprobe ip_conntrack_ftp # For win xp ftp client #modprobe ip_nat_ftp echo 1 > /proc/sys/net/ipv4/ip_forward # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT ACCEPT # Unlimited access to loop back iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # Allow UDP, DNS and Passive FTP iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT # set this system as a router for Rest of LAN iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT # unlimited access to LAN iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT # DNAT port 80 request comming from LAN systems to squid 3128 ($SQUID_PORT) aka transparent proxy iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT # if it is same system iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # DROP everything and Log it iptables -A INPUT -j LOG iptables -A INPUT -j DROP If you know where did I miss, please advice me. Thanks for all your help and I really appreciate it.

    Read the article

  • Setup for a live (low-latency) audio video broadcast over Wi-Fi?

    - by Majal Mirasol
    The Upgrade We are capturing audio (from mixer) and video (from a camera) from a main auditorium and passing it to separate rooms within the building. We used to have done this via manual audio/video cables and wires. We wanted to "upgrade" the system and wirelessly broadcast the stream via Wi-Fi. The Problem In our current setup (Wirecast running on A10 on a Wireless-N network), we have the problem of delay. Our streams are delayed from a minute up to five minutes on the clients (laptop/iPad/Android). This had not been a problem from the previous wired connections. Since the wireless network is local, we thought that a delay of less than a second should be achievable. Our Question And so it goes. Anybody there who has any experience for a setup that has both low latency and at the same time user-friendly to clients streaming in the program? Any recommendations would be highly appreciated. (Our current setup in on Windows 7, but setup on a dedicated Linux box is preferred, if achievable.)

    Read the article

  • What is the minimal steps to setup a client-server network using Windows Server 2008 R2 standard?

    - by Motivated Student
    Background I have One computer server with Win Server 2008 R2 standard installed but it has not been configured. This server has 2 LAN adapters. One adapter is connected to ISP and the other one connected to HUB/Switch. Other computers working as clients are connected to the same HUB/Switch to which the server is connected. IP Printers, IP scanners, IP camera are also connected to the same HUB/Switch. Note: I am a newbie. I only know how to plug RJ-45 sockets and assembly computer peripherals. I have no prior experience in Windows Server at all. Please teach me from the newbie's point of view. Objective I want to establish the following: Each client can access the internet, printers, scanners after it has been successfully authenticated by the server. Unauthenticated clients cannot access the internet, printers, etc. The server hosts a local site. Clients can browse internally using a private domain www.company.com. If the same domain name has been used by other on the internet, my private domain must override the public domain.

    Read the article

  • How can I split 200Mbps of streaming traffic into routers?

    - by Jared
    As the title says, I have 200Mbps of streaming video traffic coming into my command center. How do I split the load between routers? Setup is like this: fiber --- router --- switch --- workstations I'm sorry I haven't dealt with this much traffic before. so please be gentle if you're going to kick me out :) EDITED FOR DETAILS: Okay, this specific project is for our company's IP CCTV system. We have deployed over 100++ cameras all over a building/campus and we have estimated each camera to take about 2Mbps of bandwidth each. Now, they're all connected to a switch and that's entirely fine. But coming into our command center, they have to be on a router since it'll get more than 200++ cameras next year (and I don't want to have too many hosts on one subnet). My plan was to have the 1st hundred on a 172.16.9.x block and the 2nd hundred on a 172.16.10.x block (all /24). The servers I have are currently sized to match (about 5 dual 6-core xeons) and I'd have about 19 workstations all streaming video from the 5 servers. (servers pull video from the cameras). But 200Mbps of constant traffic? How the hell do I even break this up? I need to have 1 gateway, to manage the routes... I honestly think I'm way in over my head.

    Read the article

  • Recovering a damaged microSDHC

    - by djechelon
    I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

    Read the article

  • BSOD during Cygwin install

    - by Mike Pennington
    I have been running Cygwin (1.7.7) under Windows Vista 64-bit, SP2 for at least a year, and had no problems with my installation at all until today. When I tried to install apt-cyg, I realized that I needed to get the svn client. During the installation of the package dependencies, Vista threw a blue screen of death. I hoped this was a one-time occurrence, so I rebooted into Vista and tried to install svn again; same result. Next I completely removed Cygwin's directory, and all Cygwin registry entries; at this point, I tried reinstalling the base Cygwin system again. During the installation of bash, I got another BSOD: Apologies for the fuzzy pic, I had to shoot with my phone camera. I googled for BSOD and Cygwin and found a post by Dave Korn mentioning that the only reasons Cygwin should cause a BSOD is because of either ioperm.sys or some USB utilities. I have neither on my system. Every time I have tried reinstalling, Vista BSODs; I have not had problems installing any other software packages on this Vista machine. How can I get Cygwin installed again (without reinstalling Vista)?

    Read the article

  • Best photo management software?

    - by Niels Basjes
    Hi, What I would like is a single piece of software (or a smart combination of tools) that allow me to manage my photos in a better way than what I've found so far. 1. Tags Primarily I need a way of tagging the images. So I can manually tag photos the same way we tag questions here at SO/SF/SU. I want this software to place a lot of the tags automagically (obvious things like date and resolution). 2. Face recognition What I would really like is that this software has a feature that it can recognize faces in images and places tags with the name of the person. So far I've only heard of one online photo system that can do that (Picasa) and not yet of any offline tool. 3. Version database I must have some way of having a central GIT/SVN/... that contains all images. I have had a harddrive corruption a few years ago and it took me a long time to figure out which images had been damaged. I always want to be able to go back to what the camera produced. 4. Website I want to be able to generate a website (few 'tag' specific websites) based on the actual content. 5. Easy bulk uploading Many photo tools have a one on one uploading option. I prefer simply 'throwing' my images on a file server under Linux (Samba) and let the system automagically integrate, tag, recognize, etc. all images. Ok, I know these are a bit much. Perhaps you guy's have some suggestions about existing tools that can make this possible. Or even a complete system that does this. EDIT: To clarify on the OS. I prefer Linux for any 'server' task and Windows XP for any 'desktop' task. Thanks for all your input. Niels Basjes

    Read the article

  • AVCHD MTS h264 1080p file with choppy playback in Linux

    - by marc
    When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

    Read the article

  • BTrFS crashhhh?

    - by bumbling fool
    I create a new BTrFS raid10 file system using two 250GB drives and the second partition on a third 80GB drive. I create a subvol and snapshot. I mount the snapshot and start copying 8GB of data to it. It gets to around 1GB and the Desktop disappears and what looks like a non interactive terminal comes up with dump/crash information. I don't have a camera handy or I'd take a picture and post it. It basically looks like stack trace info. CTRL-ALT F7 will eventually bring back the Desktop though but the entire BTrFS portion of the OS is hung and non responsive until I reboot. I've reformated and reproduced this problem 3 times now and I'm about to give up :( I realize it is possible this problem is not entirely BTrFS' fault because I'm on natty which is still alpha. More granular details in case I'm an idiot: 1) Create FS: sudo mkfs.btrfs -m raid10 -d raid10 /dev/sda2 /dev/sdb /dev/sdc 2) Initial temporary mount: mkdir /btrfs && sudo mount -t btrfs /dev/sda2 /btrfs 3) Create subvol btrfs s c /btrfs/vm 4) Create initial snapshot: (optional) btrfs s sn /btrfs/cantremember.snap.something 5)unmount /btrfs and mount /btrfs/vm sudo mount -t btrfs -o subvol=vm /dev/sda2 /btrfs/vm 6) Copy data to subvolume. 7) Balance data across drives: (optional) btrfs f bal <path> (never get to this step 7...) Am I doing something wrong?

    Read the article

  • MicroSD card isn't detected by computer, apparently usable only with phone

    - by paulcjoubert
    I have a 4GB MicroSD card that apparently only works (in the sense that the device detects and can read and write from and to the card) with my old Nokia XpressMusic 5800 phone. I have taken pictures and recorded voice notes that were saved on the card. These are accessible after the card has been removed, which tells me that the problem isn't with the card. The card could also not be locked to the phone as it would at least be detected by a computer and it would be able to write raw data to it with dd, such as /dev/zero. Also, the card is not the Nokia card that came with the phone and I have done nothing that would have caused it to be locked. (I could not find anything on Nokia's website that helps, but then again... my search was not THAT thorough.) The card works on no other device that I have tried so far. I have tried it in my Canon camera (through an adapter), but it refuses to even boot with the card inserted. My card reader (via USB cable and hub) is detected as /dev/sdx with or without the card inserted. When trying to access the card I get an "No medium found". dmesg does not report any change at all when inserting and removing the card. I would obviously like to use my card on other devices - the phone is quite old - and even a likely explanation would help. Thankyou in advance! EDIT 1: I can use the card by connecting the phone to my computer, but this is impractical and would not allow me to use the card in any other device. EDIT 2: The data on the card is not important to me at all.

    Read the article

  • DV-AVI in DivX Plus Player and VirtualDub - playback issue

    - by user714965
    I have an AVI-video which I had (digitally) transferred from a DV camera to my PC. The video contains errors at the beginning most likely because the DV tape was pretty old. When playing this video in the DivX Plus Player I get some picture artefacts and some high noise peaks of the sound. These stops after two seconds. When I'm playing this video in VirtualDub (where I want to cut it) I get the same picture artefacts. But the sound errors (those loud high peaks) lasts ten seconds. These sound errors are also contained in the cutted video. Why does the video have more errors when played in VirtualDub? I think because of different codecs which are used for decoding the video? How can I change the codec which VirtualDub uses for decoding? I have installed ffdshow for this but it seems that it is not used because I don't get the ffdshow icon in the taskbar when playing the video in VirtualDub. When playing in DivX Player Plus I get this icon.

    Read the article

  • Recovering drive via boot to Win7 setup command prompt

    - by Valamas
    I am trying to recover data from two old IDE drives. Drive1 has been successful, but something is wrong with Drive2. It does not appear as a drive letter. Due to limited legacy hardware, the only way i can see these drives is to boot using windows 7 setup and goto the command prompt. Without going further as to why, my question is how i can access the data in this command prompt. I discovered DISKPART command and while a first time user, it looked like something that can fix my problem. Here are the results of my diskpart commands. At the bottom is a image of the commands taken with a camera. The Drive2 is present because when using the diskpart command, I can see it. How can I copy the information using a robocopy script if the drive letter is not available? how can I assign a drive letter? Is there any repair command I need to execute? When i execute DISKPART, the following is what i see. DISKPART> LIST DISK Disk### Status Size Free Disk 5 Online 37 GB 2048 KB So then I select disk 5. DISKPART> SELECT DISK 5 "Disk 5 is now the selected disk" When I list partition DISKPART> LIST PARTITION Partition ### Type Size Partition 1 Primary 101 MB Partition 2 Primary 37 GB So I select partition 2 "Partition 2 is now the selected partition." I then try to assign a drive letter DISKPART> ASSIGN LETTER=G "There is no volume specified." "Please select a volume and try again." When i list volume the drive is not present. DISKPART> LIST VOLUME Result of the above commands

    Read the article

  • Best video codec to store my own collection

    - by Jack
    Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

    Read the article

  • Errors with Using Webcam

    - by C.G.
    I have been having some issues accessing a webcam from my machine. Sometimes (not always) when I run a program that accesses the device (cheese, guvcview, and code using openCV), I get either of two messages, which lead to the program crashing. The first occurs after running the webcam for some time. libv4l2: error dequeuing buf: No such device VIDIOC_DQBUF: No such device The other will occur without even letting me have a chance to run the webcam. libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON - Unable to start capture: No space left on device Occasionally after getting these errors I will also receive a message saying that no such device can be found for subsequent runs. Other than the times that the "No device found" message appears the webcam appears when I use lsusb. My machine runs Linux Fedora 16, and the webcam is a Logitech C920. I do have ffmpeg installed, and I have been able to run the web camera many times in the past without errors. What is particularly puzzling about these errors is that they just sprung up this past weekend. No new software or hardware has been installed on this machine recently; I haven't changed any settings recently either. It could possibly be a driver issue, but I don't know what could have changed which could lead to this issue. Any attempts at researching this problem has been fruitless as this seems to most commonly occur with multiple webcams. I am only working with one device. I'd appreciate any advice for this problem, as this has become a bit frustrating.

    Read the article

  • Why does my PC successfully boot only when unplugged for more than a few minutes?

    - by philg
    I have an HP Pavilion Elite desktop computer, model HPE-490t. I like it because it didn’t cost too much, boots itself from an SSD, came with 16 GB of RAM, and has 6 CPU cores for editing video and camera RAW images. It has one behavioral quirk that I cannot explain, however. The recent power interruptions here in the Northeast got the machine into a state where it could not be restarted. It would power up for a second or two, shut down, and then power up again, never being able to get to the point of showing anything on the monitor. I unplugged it for about 10 seconds and plugged it back in. Same behavior (fails to boot). I unplugged it and walked away for an hour, then plugged it back in and it worked perfectly! I think something similar happened after installing a second hard disk drive into this machine. So the question is why does the computer behave differently depending on how long it has been unplugged? Where is energy stored that affects the machine’s ability to boot? Capacitors in the power supply? Battery on the motherboard (there is one for the clock, but that wouldn’t be exhausted by being unplugged for an hour, I don’t think)?

    Read the article

  • Unable to sync iPod Touch with my PC

    - by alex
    I'm trying to sync a first gen iPod Touch to my PC running Windows 7 64 bit. The problem is that whenever I connect the iPod, iTunes completely freezes (if I start iTunes after connecting the iPod it will simply hang until it's physically disconnected from the PC). I reinstalled iTunes thinking that it had been corrupted, but without any luck. I've had this problem with all the latest versions of iTunes. I've also tried using MediaMonkey and DoubleTwist. None of these apps see the iPod as being connected; DoubleTwist also freezes, just like iTunes. The really strange thing is that I was able to sync the iPod with this PC a while back, but I now seem to have lost that ability. I don't know what changed. Windows detects the device every time it's plugged in (I can see it in Device Manager and I can browse all photos on iPod as if it were a camera). Also, I can sync it to iTunes on Mac OS X without any major problems.

    Read the article

  • How to determine the root cause of a system lockup on Ubuntu 8.04 LTS?

    - by jdt141
    I'm currently working a project that involves setting up a PC/104 stack and running Ubuntu 8.04 LTS. We need to use the PC/104 stack because its an embedded application - and we're required to use a DeviceNet peripheral card to communicate to other devices. (DeviceNet is just a protocol on top of CAN.) Anyway, the following hardware is on the stack: Kontron MOPSPM104 with a 1GHz Intel Celeron processor ConnectTech FlashDrive/104 4GB Industrial Temp (-40 to +85 C) Woodhead (Molex) PC104DVNIO DeviceNet card A run of the mill 104 power supply The Kontron Board offers two serial ports, one VGA out, and two USB ports. The DeviceNet card is an ISA card. Because of this (per the User's Guide for the Kontron Board), I have manually set the IRQs in the BIOS to be appropriately configured, and turned off ACPI in both the BIOS and passed the appropriate flag in GRUB. I've installed Ubuntu 8.04 desktop, 32 bit. The problem that I'm having is that, from time to time, the entire 104 stack locks up. This only seems to happen in two cases, both of which we're running GNOME. We have a custom application that uses the DeviceNet card, and the system will lock up, or (more frequently) when we're running Firefox and either surfing for some information or trying to test it - typically by streaming video from a IP-camera. The reason I ask this questions is I cannot determine the root cause of this lockup. The IRQs appear to correctly configured in the BIOS and as the Kernel sees them, and nothing is logged to dmesg. If you all could help me determine the root cause of this lockup, I would greatly appreciate it. Thanks.

    Read the article

  • Very high-pitched noise when computer does something intense?

    - by Starkers
    "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

    Read the article

  • Weirdly high ping on direct ethernet connection?

    - by Antriel
    I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

    Read the article

  • Should I embed the sRGB color profile in JPEG files?

    - by basic6
    I have a large (growing) collection of scanned images. They are TIFF files, mostly 48 bit with the Adobe RGB color space. This color profile is integrated in the files. When such a file is opened in IrfanView (with plugins), it says (Image - Information) Adobe RGB 1998. "Normal images", like the JPG files from a digital camera, do not (necessarily) have a color profile integrated in the file. I understand that it's necessary to include the Adobe RGB profile in an image file which uses the Adobe RGB space, so the color values can be interpreted correctly. Here's a test image with a completely different color profile, programs that ignore the included profile (like MSIE8 or Gwenview) will render it as sRGB (?): I'm planning to convert my TIF files to JPG, so I'm wondering if there's anything wrong with using IrfanView that would save them as sRGB without embedding the sRGB profile. I've heard that images should always be saved with the color profile included. Since every image seems to be interpreted as sRGB by default (by software without color management), I don't understand why the sRGB profile should be included?

    Read the article

  • Windows Media Center showing Jerky Video on PC

    - by Kris Erickson
    I had to repave my Windows 7 x64 box last week due to a hard drive crash, and for a while everything was running perfectly but now all videos in Windows Media Center are jerky (the sound is fine, they just seem to skip a ton of frames all the time). This is on the local machine, but the same thing happens when I try to stream to my Xbox. The videos all show fine in VLC and Windows Media Player (however exhibit the same problem in Quicktime). I guess I must have installed something recently (in the process of getting all the apps I usually have running on my PC) that caused this but for the life of me I can't figure it out. I have updated to the latest video driver (and then rolled back to the standard Windows 7 driver), I have rolled back all the other drivers that I have installed (I believe). I have uninstalled all the codec packs (I also run TVersity, so I have the TVersity codec pack installed), and I uninstalled TVersity. Nothing seems to help. I have uninstalled windows media center, and reinstalled it from the Programs and Features. I have basically ran out of things to try to fix this, and am almost thinking about reinstalling Windows again. Any suggestions? Edit Specs on the PC (which I figured was unimportant since everything used to work perfectly): Intel Core 2 CPU 6600 @ 2.4 Ghz Nvidia GTS 8800 Built in realtek-audio soundcard 4GB Ram Codecs which are failing: All that I have tried, but at least Xvid, Mpgv (mpeg2 video from a camera), and Wmv (only kinds that I have ready access to).

    Read the article

  • Good process/software for organizing photos past/present

    - by Matthew
    So I have tons of photos taken all the time. I have a lot from years past that I never went through (meaning deleting duplicates, etc). I've got a new pc with windows 7, and I'm wondering what a good process is to organize those photos. They're in folders that have really no meaning (it used to be people would put them in a folder wherever, even the desktop or somewhere else, not just the My Pictures folder). I'm going to keep all pictures in the "My Pictures" folder from now on. I've used Picasa from g=Google, and it works great. Is this the recommended free software for this? What process do I use to move the old pictures over in to new "organized" folders? Lately in Picasa when I import off my camera card, I would just select something that names the folder after the date it was taken. Is this advised? Just give me ideas on how to stay organized with photos. Should I tag them also? Should I rename the file names? Keep in mind I have over 16,000 photos I'll have to go through, so it can't be anything to thorough.

    Read the article

  • Cut (smart edit) .mts (AVCHD Progressive) files un Ubuntu Lucid

    - by pts
    I have a bunch of .mts files containing AVCHD Progressive video recorded by a Panasonic camera, and I need software on Ubuntu Lucid with which I can remove the boring parts, and concatenate the interesting parts, all this without reencoding the video stream. It's OK for me to cut at keyframe boundary. If Avidemux was able to open the files, it would take about 60 hours of work for me to cut the files. (At least that was it last time I tried with similar videos, but of a file format supported by Avidemux.) So I need a fast, powerful and stable video editor, because I don't want that 60 hours of work go up to 240 or even 480 hours just because the tool is too slow or unstable or has a terrible UI. I've tried Avidemux 2.5.5 and 2.5.6, but they crash trying to open such a file, even if I convert the file to .avi first using mencoder -oac copy -ovc copy. mplayer can play the files. I've tried Avidemux 2.6.0, which can open the file, but it cannot jump to the previous or next keyframe etc. (if I make it jump to the next keyframe, and then to the previous keyframe, it doesn't end up at the original keyframe, sometimes displays an error etc.). Also I'm not sure if Avidemux 2.6.x would let me save the result without reencoding. I've tried Kdenlive 0.7.7.1, but playback is very choppy, and it cannot play audio at all (complaining that SDL cannot find the device; but many other programs on the system can play audio). It would be a pain to work with. I've tried converting the .mts file to .mkv using ffmpeg -i input.mts -vcodec copy -sameq -acodec copy -f matroska output.mkv, but that caused too much visible distortions in the video in both mplayer and Avidemux. I've tried converting the .mts file with TsRemux.exe, but Avidemux 2.5.x still can't open that file. Is there another program to cut and concatenate the files? Is there a preprocessor which would create a file (without reencoding the video) on which Avidemux wouldn't crash?

    Read the article

< Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496  | Next Page >