Search Results

Search found 14831 results on 594 pages for 'menu bar'.

Page 489/594 | < Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496  | Next Page >

• Vostro 3560 Wireless on Ubuntu 12.10

  - by ngille

  I have been using Ubuntu 12.04.1 LTS on a Dell Vostro 3560 for some time now. At first I had issues with the wireless but I was pointed to a driver from Ubuntu 11.xx for a Broadcom BCM43142 and that did work! however with the upgrade to 12.10 I find myself at a lost because the driver will not work anymore. When trying to reinstall it I get "Driver of bad quality" I still install it but it just wont work. I cant seem to find anything on this issue for 12.10 and didn't know if anyone had any advice or if someone could point me in the right direction on resources to write my own driver for it. As I know C/C++ but have never written a driver for a Linux machine before. Thanks for any help! To be more clear I installed Ubuntu 12.10 Desktop on my Dell Vostro 3560 laptop. When I log in, my wireless card isn't visible in the Network Manager popup menu, although the wired network shows up there. I installed the driver mentioned below and that did help me on 12.04 but is now broken due to "Poor quality" a sudo lspci -nn command brings up: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07) **02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)**

  Read the article

• SQL installation scripts for WebCenter Content 11g

  - by KJH

  As part of the installation of WebCenter Content 11g (UCM or URM), one of the main functions is to run the Repository Creation Utility (RCU) to establish the database schema and tables.   This is pretty helpful because it runs all the scripts you need to have without having to manually set anything up in the database.   In UCM 10g and earlier, the installation  itself would establish the database tables if you wanted it to.  Otherwise, the SQL scripts were available to be run independently ahead of time.  For DBAs who wanted to understand what was being done to the database for the application, this was helpful for them.  But in 11g, that is all masked now in RCU.  You don't get to see the scripts at all as part of it's establishing the tables.  But if you comb through the directories for RCU, you can track them down.  They are in the  /rcuHome/rcu/integration/contentserver11/sql/ directories.  And to understand the order in which they are run, you can open up the /rcuHome/rcu/integration/contentserver11/contentserver11.xml file and see how they are run there.  The order in which they are run are: contentserverrole.sql contentserveruser.sql intradoc.sql workflow.sql formats.sql users.sql default.sql contentprocedures.sql  If you are installing WebCenter Records (URM), it will run some additional scripts between the formats.sql and users.sql : MetadataSet.sql UIEnhancements.sql RecordsManagement.sql RecordsManagement_default.sql ClassifiedEnhancements.sql ClassifiedEnhancements_default.sql In addition to the scripts being available within the RCU install directories, they are also available from within the Content Server UI.  If you go to Administration -> DataStoreDesign SQL Generation, this page can allow you to download these various SQL scripts.    From here, you can select your particular database type and which components to include.  Several components make changes dynamically to the database when they are enabled, so these scripts give you a way to inspect what is being run during that startup time.  Once selected, click Generate and you now can either view or download the scripts from the Actions menu. DISCLAIMER:  Installations are ONLY supported when done with the Repository Creation Utility.  These scripts are for reference only and not supported to be run manually.

  Read the article

• Code Coverage for Maven Integrated in NetBeans IDE 7.2

  - by Geertjan

  In NetBeans IDE 7.2, JaCoCo is supported natively, i.e., out of the box, as a code coverage engine for Maven projects, since Cobertura does not work with JDK 7 language constructs. (Although, note that Cobertura is supported as well in NetBeans IDE 7.2.) It isn't part of NetBeans IDE 7.2 Beta, so don't even try there; you need some development build from after that. I downloaded the latest development build today. To enable JaCoCo features in NetBeans IDE, you need do no different to what you'd do when enabling JaCoCo in Maven itself, which is rather wonderful. In both cases, all you need to do is add this to the "plugins" section of your POM: <plugin> <groupId>org.jacoco</groupId> <artifactId>jacoco-maven-plugin</artifactId> <version>0.5.7.201204190339</version> <executions> <execution> <goals> <goal>prepare-agent</goal> </goals> </execution> <execution> <id>report</id> <phase>prepare-package</phase> <goals> <goal>report</goal> </goals> </execution> </executions> </plugin> Now you're done and ready to examine the code coverage of your tests, whether they are JUnit or TestNG. At this point, i.e., for no other reason than that you added the above snippet into your POM, you will have a new Code Coverage menu when you right-click on the project node: If you click Show Report above, the Code Coverage Report window opens. Here, once you've run your tests, you can actually see how many classes have been covered by your tests, which is pretty useful since 100% tests passing doesn't mean much when you've only tested one class, as you can see very graphically below: Then, when you click the bars in the Code Coverage Report window, the class under test is shown, with the methods for which tests exist highlighted in green and those that haven't been covered in red: (Note: Of course, striving for 100% code coverage is a bit nonsensical. For example, writing tests for your getters and setters may not be the most useful way to spend one's time. But being able to measure, and visualize, code coverage is certainly useful regardless of the percentage you're striving to achieve.) Best of all about all this is that everything you see above is available out of the box in NetBeans IDE 7.2. Take a look at what else NetBeans IDE 7.2 brings for the first time to the world of Maven: http://wiki.netbeans.org/NewAndNoteworthyNB72#Maven

  Read the article

• Learn programming backwards, or "so I failed the FizzBuzz test. Now what?"

  - by moraleida

  A Little Background I'm 28 today, and I've never had any formal training in software development, but I do have two higher education degrees equivalent to a B.A in Public Relations and an Executive MBA focused on Project Management. I've worked on those fields for about 6 years total an then, 2,5 years ago I quit/lost my job and decided to shift directions. After a month thinking things through I decided to start freelancing developing small websites in WordPress. I self-learned my way into it and today I can say I run a humble but successful career developing themes and plugins from scratch for my clients - mostly agencies outsourcing some of their dev work for medium/large websites. But sometimes I just feel that not having studied enough math, or not having a formal understanding of things really holds me behind when I have to compete or work with more experienced developers. I'm constantly looking for ways to learn more but I seem to lack the basics. Unfortunately, spending 4 more years in Computer Science is not an option right now, so I'm trying to learn all I can from books and online resources. This method is never going to have NASA employ me but I really don't care right now. My goal is to first pass the bar and to be able to call myself a real programmer. I'm currently spending my spare time studying Java For Programmers (to get a hold on a language everyone says is difficult/demanding), reading excerpts of Code Complete (to get hold of best practices) and also Code: The Hidden Language of Computer Hardware and Software (to grasp the inner workings of computers). TL;DR So, my current situation is this: I'm basically capable of writing any complete system in PHP (with the help of Google and a few books), integrating Ajax, SQL and whatnot, and maybe a little slower than an experienced dev would expect due to all the research involved. But I was stranded yesterday trying to figure out (not Google) a solution for the FizzBuzz test because I didn't have the if($n1 % $n2 == 0) method modulus operator memorized. What would you suggest as a good way to solve this dilemma? What subjects/books should I study that would get me solving problems faster and maybe more "in a programmers way"? EDIT - Seems that there was some confusion about what did I not know to solve FizzBuzz. Maybe I didn't express myself right: I knew the steps needed to solve the problem. What I didn't memorize was the modulus operator. The problem was in transposing basic math to the program, not in knowing basic math. I took the test for fun, after reading about it on Coding Horror. I just decided it was a good base-comparison line between me and formally-trained devs. I just used this as an example of how not having dealt with math in a computer environment before makes me lose time looking up basic things like modulus operators to be able to solve simple problems.

  Read the article

• Parallel MSBuild FTW - Build faster in parallel

  - by deadlydog

  Hey everyone, I just discovered this great post yesterday that shows how to have msbuild build projects in parallel Basically all you need to do is pass the switches “/m:[NumOfCPUsToUse] /p:BuildInParallel=true” into MSBuild. Example to use 4 cores/processes (If you just pass in “/m” it will use all CPU cores): MSBuild /m:4 /p:BuildInParallel=true "C:\dev\Client.sln" Obviously this trick will only be useful on PCs with multi-core CPUs (which we should all have by now) and solutions with multiple projects; So there’s no point using it for solutions that only contain one project.  Also, testing shows that using multiple processes does not speed up Team Foundation Database deployments either in case you’re curious Also, I found that if I didn’t explicitly use “/p:BuildInParallel=true” I would get many build errors (even though the MSDN documentation says that it is true by default). The poster boasts compile time improvements up to 59%, but the performance boost you see will vary depending on the solution and its project dependencies.  I tested with building a solution at my office, and here are my results (runs are in seconds): # of Processes 1st Run 2nd Run 3rd Run Avg Performance 1 192 195 200 195.67 100% 2 155 156 156 155.67 79.56% 4 146 149 146 147.00 75.13% 8 136 136 138 136.67 69.85%   So I updated all of our build scripts to build using 2 cores (~20% speed boost), since that gives us the biggest bang for our buck on our solution without bogging down a machine, and developers may sometimes compile more than 1 solution at a time.  I’ve put the any-PC-safe batch script code at the bottom of this post. The poster also has a follow-up post showing how to add a button and keyboard shortcut to the Visual Studio IDE to have VS build in parallel as well (so you don’t have to use a build script); if you do this make sure you use the .Net 4.0 MSBuild, not the 3.5 one that he shows in the screenshot.  While this did work for me, I found it left an MSBuild.exe process always hanging around afterwards for some reason, so watch out (batch file doesn’t have this problem though).  Also, you do get build output, but it may not be the same that you’re used to, and it doesn’t say “Build succeeded” in the status bar when completed, so I chose to not make this my default Visual Studio build option, but you may still want to. Happy building! ------------------------------------------------------------------------------------- :: Calculate how many Processes to use to do the build. SET NumberOfProcessesToUseForBuild=1  SET BuildInParallel=false if %NUMBER_OF_PROCESSORS% GTR 2 (                 SET NumberOfProcessesToUseForBuild=2                 SET BuildInParallel=true ) MSBuild /maxcpucount:%NumberOfProcessesToUseForBuild% /p:BuildInParallel=%BuildInParallel% "C:\dev\Client.sln"

  Read the article

• Make the Taskbar Buttons Switch to the Last Active Window in Windows 7

  - by The Geek

  The new Windows 7 taskbar’s Aero Peek feature, with the live thumbnails of every window, is awesome… but sometimes you just want to be able to click the taskbar button and have the last open window show up instead. Here’s a quick hack to make it work better. To better understand the problem, imagine having nine windows of the same type open on your screen, but you are primarily working in just one of the windows at a time. So every time you want to switch back, you have to click the taskbar button, and then choose the one you are using from the list, which can be pretty annoying… Now if you know your Windows 7 shortcuts, you’d know that you can simply hold down the Ctrl key while clicking on the taskbar button, and the last window will show up. In fact, you can keep holding down the Ctrl key and keep clicking, and Windows will cycle through the open windows. It’s a useful shortcut, but hardly something you want to do every single time. Instead, we’ll use a quick registry hack to make the normal click switch to the last open window—if you still want to see the thumbnail list, just hover your mouse over the button for half a second to see the full list. Manual Registry Hack for Last Active Window Open up regedit.exe through the start menu search or run box, and then head down to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced Once you’re there, create a new 32-bit DWORD value on the right hand side, give it the name LastActiveClick, and set the value to 1. Once you are done, it should look something like this: Once you are done, you’ll have to log off and back on, or you can kill Explorer.exe through Task Manager and re-open it. Download the Registry Hack Instead Since you probably don’t feel like registry hacking, we’ve provided you an easy downloadable version. You can simply download the file, extract it, and then double-click on the LastActiveClick.reg file. Once you are done, you’ll have to log off and back on, just like with the manual registry hack. Download LastActiveClick Registry Hack from howtogeek.com Similar Articles Productive Geek Tips Make the Windows 7 Taskbar Work More Like Windows XP or VistaStupid Geek Tricks: Select Multiple Windows on the TaskbarReorganize Your Taskbar Buttons and Tray Icons in XP/VistaKeyboard Ninja: Create a Hotkey to Switch to Your Open Outlook WindowTaskbar Eliminator Does What the Name Implies: Hides Your Windows Taskbar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• Office 2010 Professional Plus (Top 10 reasons to upgrade)

  - by mbcrump

  Being a huge nerd, I decided that I would go ahead and upgrade to the latest and greatest office. That being, Office 2010 Professional Plus. The biggest concern that I had was loosing all my mail settings from Outlook 2007. Thankfully, it upgrade gracefully and worked like a charm. So lets start this top 10 list. 1) You can upgrade without fear of loosing all your stuff! As you can tell by the screenshot below, you can select what you want to do. I selected to remove all previous versions.    2) Outlook conversations: Just like GMail, you can now group emails by conversations. This is simply awesome and a must have. 3) The ability to ignore conversations. If you are on a email thread that has nothing to do with you. Simply “ignore” the conversation and all emails go into the deleted folder. 4) Quick Steps, do you send an email to the same team member or group constantly. With quick steps, its just one click away. 5) Spell check in the Subject line! 6)  Easier Screenshots, built in just click the button. No more ALT-Printscreen for those that are not aware of the awesome SnagIT 10 that's out. 7) Open in protected view. When you open a document from an email attachment, it lets you know the file may be unsafe. You can click a button to enable editing. This is great for preventing macros.       8) Excel has always had a variety of charts and graphs available to visually depict data and trends. With Excel 2010, though, Microsoft has added a new feature called Sparklines, which allows you to place a mini-graph or trend line in a single cell. The Sparklines are a cool way to quickly and simply add a visual element without having to go through the effort of inserting a graph or chart that overwhelms the worksheet. 9) Contact actions. If you hover over a name in the form or fields on an email, you get a popup giving you several actions you can perform on the person such as adding them to your Outlook contacts, scheduling a meeting, viewing their stored contact information if they are already in your contacts, sending an instant message or even starting a telephone call. 10) Windows 7 Task Bar Context Menu – I love the jumplist. I don’t know how much that I would actually use it but it just rocks.

  Read the article

• Reduce weight in healthy way - Day 2

  - by krnites

  My second day of reducing weight and it seems most of the blog are correct in saying that you can reduce weight if your calorie consumption is less than what you burn. In one day I have lost 1 lbs without doing anything. My current weight is 177.4 lbs. Yesterday I ate small portion of dinner that I used to eat that also around 7 PM. Normally I eat my dinner around 10 PM and withing 2 hour of eating I go for sleep, but yesterday I ate around 7 PM and went for sleep only after 12.On my second day I have eaten noodles and 3 eggs in breakfast and sesame chicken ( I love it) and fried rice in lunch, I still have not gone for running but had plan to go for running and then swimming. I hope it will at least burn the calories that I had taken. On some site it was written that a normal men body needs around 2000 Calorie a day. So if I am eating less than 2000 calorie ( noodles + 3 eggs = 400+200, rice + sesame chicken = 1300, total = 1900) and burning around 300 calorie, my total calorie intake will be 1600 which is less than what my body needs. So most probably by tomorrow I should come under 176 lb bracket.Apart from counting the calorie that I am taking in everyday and approx number of calorie that I am burning everyday, I had also starting tracking my physical activities on my mobile. I have got a beautiful Samsung Focus S Windows 7.5 mobile. And after browsing through the market I have downloaded couple of health Apps.1. 6 Week training - this has set of exercise and lets you choose the number of sets you want to do for all exercise. Its focus on your core muscles.2. Fast food Calories - This apps has all the fast food chain listed and give the calorie count of each of the food item available on there menu. Like for Burger King's French Fries Large (Salted) contains 500 Calorie.3. Gym Pocket Guide - Contains instructions for different kind of exercise and tells a right way of doing them.4.  RunSat - kind of GPS based application. Its mark the distance you have run, shows the path you have taken on a map, total calorie burnt, laps completed. I love this apps.5. Stop Watch I also have noticed that If I am running in GYM and have television in front of me where a movie or serial is going on which I like,  I normally didn't notice the time. Most of the time running on treadmill is very boring, but if some music video is playing or some kind of sitcom is going, I can run for  a hour or half.So on day 2 I have lost 1 lbs and had learnt that calorie intake should be less then calorie burnt for a given day.

  Read the article

• What is the correct way to use g_signal_connect() in C++ for dynamic unity quicklists?

  - by hakermania

  I want to make my application use dynamic unity quicklists. For building my application I am using C++ and the QtCreator IDE. When a menu action is triggered I want to be able to have access to a non-static function of my MainWindow class so as to be able to update the Graphical User Interface which can be accessed from inside 'normal' MainWindow's functions. So, I am building up my quicklist like this (mainwindow.cpp): void MainWindow::enable_unity_quicklist(){ Unity_Menu = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set_bool (Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, FALSE); Unity_Stop = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set(Unity_Stop, DBUSMENU_MENUITEM_PROP_LABEL, "Stop"); dbusmenu_menuitem_child_append (Unity_Menu, Unity_Stop); g_signal_connect (Unity_Stop, DBUSMENU_MENUITEM_SIGNAL_ITEM_ACTIVATED, G_CALLBACK(&fake_callback), (gpointer)this); if(!unity_entry) unity_entry = unity_launcher_entry_get_for_desktop_id("myapp.desktop"); unity_launcher_entry_set_quicklist(unity_entry, Unity_Menu); dbusmenu_menuitem_property_set_bool(Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, true); dbusmenu_menuitem_property_set_bool(Unity_Stop, DBUSMENU_MENUITEM_PROP_VISIBLE, true); } void MainWindow::fake_callback(gpointer data){ MainWindow* m = (MainWindow*)data; m->on_stopButton_clicked(); } void MainWindow::on_stopButton_clicked(){ //stopping the process... } mainwindow.h: private slots: void enable_unity_quicklist(); void on_stopButton_clicked(); public slots: static void fake_callback(gpointer data); This suggestion was taken from http://old.nabble.com/Using-g_signal_connect-in-class-td18461823.html The program crashes immediately after I choose the 'Stop' action from the Unity Quicklist. Debugging the program shows that I am not able to access anything MainWindow related inside the on_stopButton_clicked() without crashing. For example, it crashes when doing this check (which is the first 2 lines of code inside this function): if (!ui->stopButton->isEnabled()) return; I have also tested lots of other things that I found at the internet, but nothing of them worked. One interesting solution would be to use gtkmm (http://developer.gnome.org/gtkmm-tutorial/stable/sec-connecting-signal-handlers.html.en) but I am not used at all working on GTK applications (I work solely in Qt) and I don't know if this even suits to my occasion. A compilable example indicating what the problem is can be found at: http://ubuntuone.com/7iKA3wnPmWVp8YNNDLlVQI (3.2Kb) If you are not familiar with the QtCreator IDE, you can compile with the following commands, as long as you have all the needed libraries: cd dynamic_unity_quicklists_test; qmake -project; qmake; make

  Read the article

• Issue 56 - Super Stylesheets Skinning in DotNetNuke 5

  May 2010 Welcome to Issue 56 of DNN Creative Magazine In this issue we show you how to use the powerful new Super Stylesheets skinning feature in DotNetNuke 5. Super Stylesheets are ideal for both beginner and experienced skin designers, they provide skin layouts using CSS. The advantage of Super Stylesheets is that you can easily create a skin layout which works in all browsers without the need to learn complex CSS techniques. They are also very quick to build and you can change a skin layout in a matter of minutes rather than hours. We show you how to build a skin from the very beginning using Super Stylesheets, we show you how to create various skin layouts, as well as multi-layouts. We also show you how to style the skin, how to add tokens such as the logo, menu, login links etc. and walk you through how to create a fully working skin from scratch. Following this we continue the Open Web Studio tutorials, this month we demonstrate how to create an installable DotNetNuke PA module using OWS. This is an essential technique which allows you to package up the OWS applications that you have created and build them into an installable zip package. The zip file is then installable as a standard DotNetNuke module which means you can easily install your OWS applications on other DotNetNuke installations by simply installing them as a standard DotNetNuke module. To finish, we have part six of the "How to Build a News Application with DotNetMushroom Rapid Application Developer (RAD)" article, where we demonstrate how to create a News Carousel using RAD, JQuery and the JCarousel plugin. This issue comes complete with 15 videos. Skinning: Super Stylesheets Skinning in DotNetNuke 5 - DNN Layouts (12 videos - 98mins) Module Development Series: How to Create an Installable DotNetNuke PA Module Using OWS (3 videos - 23mins) How to Implement a News Carousel Using DotNetMushroom RAD and JQuery View issue 56 to download all of the videos in one zip file DNN Creative Magazine for DotNetNuke Web Designers Covering DotNetNuke module video reviews, video tutorials, mp3 interviews, resources and web design tips for working with DotNetNuke. In 56 issues we have created 578 videos!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to switch off wifi on startup or from the console

  - by mit

  I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

  Read the article

• Our Favorite Highlights from OpenWorld 2012

  - by Kathy.Miedema

  By Kathy Miedema and Misha Vaughan, Oracle Applications User Experience The Oracle Applications User Experience (UX) team’s activities around OpenWorld expand every year, but this year we certainly raised the bar.   Members of our team helped deliver three, separate, all-day training events in the week prior to OpenWorld. Our Fusion User Experience Advocates (FXA) and Applications UX Sales Ambassadors (SAMBA) have all-new material around the Oracle user experience to deliver at conferences in the coming year - Fusion Applications design patterns, mobile design patterns, and the new face of Fusion. We also delivered a hands-on workshop sharing user experience tools for our customers that is designed to answer this question: "If I have no UX staff, what do I do?" We also spent the weeks just before OpenWorld preparing to talk about the new face of Fusion Applications, a greatly simplified entry experience into Fusion Applications for self-service users, CRM users, and IT managers who want to change the look and feel quickly. Special thanks to Oracle ACE Director Floyd Teter for the first mention of our project.Jeremy Ashley, VP, Oracle Applications User Experience Customers may have seen one of the many OpenWorld session demos of the new face of Fusion, which will be available with Fusion Applications soon. It was shown in sessions by Oracle's Chris Leone, Anthony Lye, and our own Vice President, Jeremy Ashley, among others.   Leone reinforced the importance of user experience as one of three main design principles for Fusion Applications, emphasizing that Fusion was designed from the beginning to be intelligent, social, and mobile. User experience highlights of the new face of Fusion, he said, included the need for "zero training," and he called the experience "easy to use." He added that deploying it for HCM self-service would be effortless.  Customers take part in a usability lab tour during OpenWorld 2012. Customers also may have seen the new face of Fusion on the demogrounds or during one of our teams' chartered lab tours at the end of the week. We tested other new designs at our on-site lab in the Intercontinental Hotel, next to Moscone West. Applications User Experience team members show eye-tracking and mobile demos at OOW. We were also excited to kick off new branches of the Oracle Usability Advisory Board, which now has groups in Latin America and the Middle East, in addition to North America and EMEA.   And we were pleasantly surprised by the interest in one of our latest research projects, Oracle Voice, which is designed to enable faster data input for on-the-go users. We offer a big thank-you to the Nuance demopod for sharing the demo with OpenWorld attendees.  For more information on our program and products like the new face of Fusion, please comment below. 

  Read the article

• Black screen on latest Nvidia Cards when starting LightDM/Ubuntu

  - by Luis Alvarado

  Today I installed an Nvidia GT440 on my computer, changing the one that existed there, an Nvidia 9500GT. After changing it I started getting a problem where the screen just went black when loading the lightdm login screen (Where I punt my user and password). The thing is, if I disconnect the VGA cable and connect it again I get to see the lightdm greeter and everything works perfect. The problem is that I have to connect/disconnect every time I reboot the PC. I tried installing the 285.xx drivers. Same problem. I removed the Nvidia drivers installed with Jockey, rebooted, same problem. I install the current 280.xx again, same problem. After all that I installed a fresh install of Ubuntu, selected to install the Nvidia drivers while installing it from the livecd. After booting the same problem appeared. Dmesg does not say anything wrong about it. Same goes for the log from Jockey. What else should I check or what to do to solve it. Just to clarify, this does not happen BEFORE the lightdm greeter appears. Am guessing before the actual use of the video card with X starts with all the 2D/3D stuff that is used in ligthdm and unity. I can use any tty and even see the Ubuntu logo when starting. UPDATE: When I open a game in fullscreen the problem appears again. I have to unplug the monitor cable and plug it back in to see the game. Then when I quit the game I have to do it again to see the desktop. UPDATE 2: Today I bought a HDMI cable, connected the video card to the TV am testing it with and it actually did log in correctly without any black screen but it shows the resolution a little over the actual size of the screen. So I see only half of the launcher since the left side of it is hidden outside of the real resolution and the top bar is beyond the resolution. So the black screen is related to the VGA connection.

  Read the article

• Grub rescue - error: unknown filesystem

  - by user53817

  I have a multiboot system set up. The system has three drives. Multiboot is configured with Windows XP, Windows 7, and Ubuntu - all on the first drive. I had a lot of unpartitioned space left on the drive and was reserving it for adding other OSes and for storing files there in the future. One day I went ahead and downloaded Partition Wizard and created a logical NTFS partition from within Windows 7, still some unpartitioned space left over. Everything worked fine, until I rebooted the computer a few days later. Now I'm getting: error: unknown filesystem. grub rescue First of all I was surprised not to find any kind of help command, by trying: help, ?, man, --help, -h, bash, cmd, etc. Now I'm stuck with non-bootable system. I have started researching the issue and finding that people usually recommend to boot to a Live CD and fix the issue from there. Is there a way to fix this issue from within grub rescue without the need for Live CD? UPDATE By following the steps from persist commands typed to grub rescue, I was able to boot to initramfs prompt. But not anywhere further than that. So far from reading the manual on grub rescue, I was able to see my drives and partitions using ls command. For the first hard drive I see the following: (hd0) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) I now know that (hd0,msdos6) contains Linux on it, since ls (hd0,msdos6)/ lists directories. Others will give "error: unknown filesystem." UPDATE 2 After the following commands I am now getting to the boot menu and can boot into Windows 7 and Ubuntu, but upon reboot I have to repeat these steps. ls ls (hd0,msdos6)/ set root=(hd0,msdos6) ls / set prefix=(hd0,msdos6)/boot/grub insmod /boot/grub/linux.mod normal UPDATE 3 Thanks Shashank Singh, with your instructions I have simplified my steps to the following. I have learned from you that I can replace msdos6 with just a 6 and that I can just do insmod normal instead of insmod /boot/grub/linux.mod. Now I just need to figure out how to save this settings from within grub itself, without booting into any OS. set root=(hd0,6) set prefix=(hd0,6)/boot/grub insmod normal normal UPDATE 4 Well, it seems like it is a requirement to boot into Linux. After booting into Ubuntu I have performed the following steps described in the manual: sudo update-grub udo grub-install /dev/sda This did not resolve the issue. I still get the grub rescue prompt. What do I need to do to permanently fix it? I have also learned that drive numbers as in hd0 need to be translated to drive letters as in /dev/sda for some commands. hd1 would be sdb, hd2 would be sdc, and so on. Partitions listed in grub as (hd0,msdos6) would be translated to /dev/sda6.

  Read the article

• Error while removing the new kernel 2.6.37

  - by Tarek

  Hi! I tried to install the new kernel but something went wrong and I'm trying to remove it now. The error massege is: mhd@Tarek-Laptop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.37-020637-generic 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 111MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 188780 files and directories currently installed.) Removing linux-image-2.6.37-020637-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic /etc/default/grub: 33: Syntax error: EOF in backquote substitution run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.37-020637-generic.postrm line 328. dpkg: error processing linux-image-2.6.37-020637-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.37-020637-generic E: Sub-process /usr/bin/dpkg returned an error code (1) The previous unsloved error is on this bug. This is my grub configuration file: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` RUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1024x768-24,mtrr=3,scroll=ywrap" video=uvesafb:mode_option=>>1024x768-24<<,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX=" vga=792 splash" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1024x768-24 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" thank you for answering.

  Read the article

• Now Shipping! NetAdvantage for .NET 2010 Volume 3!

  The new NetAdvantage Ultimate includes all four Line of Business user interface control sets for ASP .NET, Windows Forms, WPF and Silverlight plus two advanced Data Visualization UI control sets for WPF and Silverlight. With six NetAdvantage products in one robust package, Infragistics® gives you hundreds of controls and infinite development possibilities. Unified XAML Product Strategy-Share Code, Get More Controls In the 10.3 release, Infragistics continues to deliver code parity between the XAML platforms, WPF and Silverlight. In the line of business toolsets, Infragistics introduces the new xamSchedule™, full-featured, Outlook® 2010-style schedule controls, and the new xamDataTree™, a data bound tree view that comfortably handles tens of thousands of tree nodes. Mimicking our Silverlight Drag and Drop Framework, the WPF Drag and Drop Framework CTP empowers you to add your own rich touches to your applications. Track Users' Behaviors New to all NetAdvantage Silverlight controls is the Infragistics Analytics Framework (IGAF), which empowers you to track user behavior in RIAs running on Silverlight 4. Building on the Microsoft® Silverlight Analytics Framework, with IGAF you can analyze the user's behaviors to ensure the experience you want to deliver. NetAdvantage for Windows Forms--New Office® 2010 Ribbon and Application Menu 2010 Create new experiences with Windows Forms. Now with Office 2010 styling, NetAdvantage for Windows Forms has new features such as Microsoft® Office 2010 ribbon and enhanced Infragistics.Excel to export the contents of the high performance WinGrid™ into Microsoft Excel® 2010. The new Windows Message Support enables Infragistics standalone editor controls to process numerous Windows® OS messages, allowing them to respond just like native controls to changes in the Windows environment. Create Faster Web 2.0 Experiences with NetAdvantage for ASP .NET Infragistics continues to push the envelope to deliver the fastest ASP .NET WebForms controls available on the market. Our lightning fast ASP .NET grids are now enhanced with XPS/PDF Exporting and Summary Rows. This release also includes support for jQuery Templating (as a CTP) within our WebDataGrid™ and WebDataTree™ controls allowing you to quickly cut down overall page size. Deliver Business Intelligence with Power, Flexibility and the Office 2010 Experience NetAdvantage for WPF Data Visualization and NetAdvantage for Silverlight Data Visualization help you deliver flexible, powerful and usable end user experiences in Business Intelligence applications. Both suites include the Pivot Grid that delivers the full power of online analytical processing (OLAP) to present multi-dimensional data, sliced and diced in cross-tabulated form for end users to drill down into, interact with and easily extract meaning from the data. Mapping Made Easy 10.3 marks the official release of the WPF Data Visualization xamMap™ control to map anything and everything from geographic to geo-spacial mapping data. Map layers allow you to add successive levels of detail, navigational panes for panning in all directions, color swatch panes that facilitate value scales like Choropleth shading, and scale panes allowing users to zoom-in and out. Both toolsets introduce the first of many relationship maps! With the xamOrgChart™ CTP you can map out organizational charts of up to 50K employees, competitive brackets (think World Cup) and any other relational, organizational map your application needs. http://www.infragistics.com span.fullpost {display:none;}

  Read the article

• Problem with OpenGL or Unity, need Gnome fallback mode

  - by William Wind

  This question is in two parts, and I have been searching the web for days to find answers. With no luck I thought I'd drop by and ask for your help. Here goes: 1.) I'm running Ubuntu 13.04 and one day last week Unity suddenly wound't work. After the login screen, I was either faced with an all black and non-responsive screen, or sometimes it booted and I could see my desktop wallpaper (and add and remove icons/folders from the desktop). But there was no menu in the left hand side and no top bar :-( However I could still enter the terminal. I borrowed my dad's laptop and looked for a solution online. About two days later I gave up (I'm still kind of a n00b at Linux) and found a way to install Gnome Fallback, via the terminal. When I used it, I had the same problem. [clue #1] Missing menues. But if I rebooted into Gnome Fallback mode with no effects. It worked. Great! I have used that for some days now, while still trying to fix the original problem with either Unity or OpenGl or whatever went wrong in the first place. With no luck. After giving up on my search for a fix (I know that came out wrong) -- I decided to reinstall Ubuntu 13.04 from a CD. But! After that I was left where I began. When booting into my account, it only shows the desktop wallpaper and the icons. I can click and enter the folders, but not go into the menues. Last time I fixed it with Gnome Fallback mode, because I could enter the terminal and the PC was automatically online, via wireless network. But not this time, I can't get online. So: 1.) How do I via the LiveCD Ubuntu version (the one I'm using right now) install Gnome Fallback unto the harddrive based system? 2.) If impossible. How can I access the wireless Internet via the terminal, so I can install Gnome Fallback, from the "broken" Unity session. 3.) Is there any other things that I should try? Please help me, PS: My GFX-card is an ATI Radeon something and I have install and used the "Redwood" drive (I think its called) for many weeks prior to the shutdown.

  Read the article

• Why can't a blendShader sample anything but the current coordinate of the background image?

  - by Triynko

  In Flash, you can set a DisplayObject's blendShader property to a pixel shader (flash.shaders.Shader class). The mechanism is nice, because Flash automatically provides your Shader with two input images, including the background surface and the foreground display object's bitmap. The problem is that at runtime, the shader doesn't allow you to sample the background anywhere but under the current output coordinate. If you try to sample other coordinates, it just returns the color of the current coordinate instead, ignoring the coordinates you specified. This seems to occur only at runtime, because it works properly in the Pixel Bender toolkit. This limitation makes it impossible to simulate, for example, the Aero Glass effect in Windows Vista/7, because you cannot sample the background properly for blurring. I must mention that it is possible to create the effect in Flash through manual composition techniques, but it's hard to determine when it actually needs updated, because Flash does not provide information about when a particular area of the screen or a particular display object needs re-rendered. For example, you may have a fixed glass surface with objects moving underneath it that don't dispatch events when they move. The only alternative is to re-render the glass bar every frame, which is inefficient, which is why I am trying to do it through a blendShader so Flash determines when it needs rendered automatically. Is there a technical reason for this limitation, or is it an oversight of some sort? Does anyone know of a workaround, or a way I could provide my manual composition implementation with information about when it needs re-rendered? The limitation is mentioned with no explanation in the last note in this page: http://help.adobe.com/en_US/as3/dev/WSB19E965E-CCD2-4174-8077-8E5D0141A4A8.html It says: "Note: When a Pixel Bender shader program is run as a blend in Flash Player or AIR, the sampling and outCoord() functions behave differently than in other contexts.In a blend, a sampling function will always return the current pixel being evaluated by the shader. You cannot, for example, use add an offset to outCoord() in order to sample a neighboring pixel. Likewise, if you use the outCoord() function outside a sampling function, its coordinates always evaluate to 0. You cannot, for example, use the position of a pixel to influence how the blended images are combined."

  Read the article

• Should a server "be lenient" in what it accepts and "discard faulty input silently"?

  - by romkyns

  I was under the impression that by now everyone agrees this maxim was a mistake. But I recently saw this answer which has a "be lenient" comment upvoted 137 times (as of today). In my opinion, the leniency in what browsers accept was the direct cause of the utter mess that HTML and some other web standards were a few years ago, and have only recently begun to properly crystallize out of that mess. The way I see it, being lenient in what you accept will lead to this. The second part of the maxim is "discard faulty input silently, without returning an error message unless this is required by the specification", and this feels borderline offensive. Any programmer who has banged their head on the wall when something fails silently will know what I mean. So, am I completely wrong about this? Should my program be lenient in what it accepts and swallow errors silently? Or am I mis-interpreting what this is supposed to mean? The original question said "program", and I take everyone's point about that. It can make sense for programs to be lenient. What I really meant, however, is APIs: interfaces exposed to other programs, rather than people. HTTP is an example. The protocol is an interface that only other programs use. People never directly provide the dates that go into headers like "If-Modified-Since". So, the question is: should the server implementing a standard be lenient and allow dates in several other formats, in addition to the one that's actually required by the standard? I believe the "be lenient" is supposed to apply to this situation, rather than human interfaces. If the server is lenient, it might seem like an overall improvement, but I think in practice it only leads to client implementations that end up relying on the leniency and thus failing to work with another server that's lenient in slightly different ways. So, should a server exposing some API be lenient or is that a very bad idea? Now onto lenient handling of user input. Consider YouTrack (a bug tracking software). It uses a language for text entry that is reminiscent of Markdown. Except that it's "lenient". For example, writing - foo - bar - baz is not a documented way of creating a bulleted list, and yet it worked. Consequently, it ended up being used a lot throughout our internal bugtracker. Next version comes out, and this lenient feature starts working slightly differently, breaking a bunch of lists that (mis)used this (non)feature. The documented way to create bulleted lists still works, of course. So, should my software be lenient in what user inputs it accepts?

  Read the article

• Problems using custom keyboard layout / symbols file

  - by January

  I have a custom xkb symbols file which looks as follows: // modify the basic German layout to have polish characters default partial alphanumeric_keys xkb_symbols "basic" { include "de(basic)" name[Group1]="Germany - with polish characters"; key <AD03> { [ e, E, eogonek, Eogonek ] }; key <AD09> { [ o, O, oacute, Oacute ] }; key <AC01> { [ a, A, aogonek, Aogonek ] }; key <AC02> { [ s, S, sacute, Sacute ] }; key <AD06> { [ z, Z, zabovedot, Zabovedot ] }; key <AB02> { [ x, X, zacute, Zacute ] }; key <AB03> { [ c, C, cacute, Cacute ] }; key <AB06> { [ n, N, nacute, Nacute ] }; }; The name of the file is depl. I copy the file to /usr/share/X11/xkb/symbols and it works with setxkbmap depl. However, I also tried to add the respective menu entries in the "Text Entry" customization. I have modified the file /usr/share/X11/xkb/rules/evdev.xml and added the following section: <layout> <configItem> <name>depl</name> <shortDescription>depl</shortDescription> <description>German (with Polish characters)</description> <languageList> <iso639Id>ger</iso639Id> </languageList> </configItem> </layout> I have then reconfigured the xkb data with sudo dpkg-reconfigure xkb-data. It works in as much as that the new layout appears as a viable option in the Text Entry dialog, it can be added to the list of dialogs and is visible in the application indicator: However, it does not work, the new symbols are not loaded. No errors are reported in /var/log/Xorg.0.log.

  Read the article

• What is 'Ubuntu Unity' (for the Desktop)?

  - by Martin

  Ok, so there's the buzz of Canonical (wanting to) switch for new Ubuntu version from the GNOME default desktop to their own Unity shell. (I hope that's accurate.) It seems I can not totally fathom what Unity actually is. For looking at its homepage it currently is firmly targeted at netbooks and the somehow different usage model on these. Is it a classical desktop? -- Taskbar? Shortcuts? Is the difference between Ubuntu(GNOME)+Unity more/less pronounced than the difference between Ubuntu and Kubuntu? Will "my parents" be able to get the interface if they've been using the classical gnome desktop so far? Edit: I would not like to split this up into more specific questions, as What is Unity? is exactly what the people I set up Ubuntu boxes for will ask me if they hear that the newer Ubuntu version is using that instead of the Desktop -- and it might well happen someone phrases it like that :-) I will certainly not give them the link to the HP as the explanation there does not lay out if it is a desktop or something more or something less: (It does not for me - therefore I'm asking here.) Unity is designed for netbooks and related touch-based devices. It includes [...] that makes it fast and easy to access [...] while removing screen elements that are rarely used in mobile and netbook computing. (emphasis mine) -- the explanation there doesn't even mention the desktop-PC! Unity has a vertical task management panel on the left-hand side and a menu panel at the top of the screen. [...] This sounds like a re-themed normal desktop. Clicking on an icon will give the target application focus if it is already running or launch it if it is not already running. If you click the ... Aha. Sounds like Windows 7. ... icon of an application that already has focus, Unity will activate an Expose-style view of all the open windows associated with that application. No clue what that's supposed to be. So it would really be nice if someone could explain for non desktop-design-terms experts what Unity is.

  Read the article

• Actor and Sprite, who should own these properties?

  - by Gerardo Marset

  I'm writing sort of a 2D game engine for making the process of creating games easier. It has two classes, Actor and Sprite. Actor is used for interactive elements (the player, enemies, bullets, a menu, an invisible instance that controls score, etc) and Sprite is used for animated (or not) images with transparency (or not). The actor may have an assigned sprite that represents it on the screen, which may change during the game. E.g. in a top-down action game you may have an actor with a sprite of a little guy that changes when attacking, walking, and facing different directions, etc. Currently the actor has x and y properties (its coordinates in the screen), while the sprite has an index property (the number of the frame currently being shown by the sprite). Since the sprite doesn't know which actor it belongs to (or if it belongs to an actor at all), the actor must pass its x and y coordinates when drawing the sprite. Also, since a actors may reset its sprite each frame (and usually do), the sprite's index property must be passed from the old to the new sprite like so (pseudocode): function change_sprite(new_sprite) old_index = my.sprite.index my.sprite = new_sprite() my.sprite.index = old_index % my.sprite.frames end I always thought this was kind of cumbersome, but it never was a big problem. Now I decided to add support for more properties. Namely a property to draw the sprite rotated, a property to draw it flipped, it a property draw it stretched, etc. These should probably belong to the sprite and not the actor, but if they do, the actor would have to pass them from the old to the new sprite each time it changes... On the other hand, if they belonged to the actor, the actor would have to pass each property to the sprite when drawing it (since the sprite doesn't know which actor it belongs to, and it shouldn't, since sprites aren't just meant to be used by actors, really). Another option I thought of would be having an extra class that owns all these properties (plus index, x and y) and links an actor with a sprite, but that doesn't come without drawbacks. So, what should I do with all these properties? Thanks!

  Read the article

• What economic books would you suggest for learning about economic valuation of goods and simulations thereof?

  - by Rushyo

  I'm looking to create an economic model for a game based on goods created procedurally. Every natural resource and produced good would be procedurally generated, with certain goods being assigned certain uses. Fakesium might be used for the production of Weapon A and produced from Fakesium factories which use Dilithium and Widgets as reagents, where Widgets are also the product of Foo and Bar The problem is not creating the resources and their various production utlities - but getting the game's AI empires and merchants to (Addendum: somewhat) correctly value the goods according to their scarcity, utility and production costs. I need to create a simulation of goods which allows the various game factions to assign a common value denominator (credits) to each resource, depending on how much its worth to that empire. I see the simulation being something like: "I have a high requirement for Weapon A. Since I don't have much of Fakesium, which is needed for Weapon A - I must have a high demand for Fakesium. If I can acquire Fakesium, devalue it. If not, increase its value - and also increase demand for Dilithium and Widgets too." This is very naive - because it may be much much cheaper for the empire to simply purchase Dilithium and Widgets directly rather than purchasing Fakesium, for example. Another example is two resources might allow the creation of Weapon A (Fakesium and Lieron), so we'd need to consider that. I've been scratching my head over the problem and it keeps growing. By the time the player joins the world, I'd expect enough iterations of this process to have occurred that prices would have largely normalised - and would then only trigger rarely to compensate for major changes (eg. if the player blows up the world's only Foo mine!) Could anyone suggest resources (books, largely) which outline this style of modelling, preferably in the context of simulations? Since this problem would never occur outside fantasy worlds, I figured this is probably the most likely place to find people who have encountered similar problems and I'm sure there's people who know of good places for Games Developers to start looking at less specific economic theory too. Additionally, does anyone know of any developers with blogs whose games or research applications perform similar modelling? EDIT: I think I should underline that I'm not looking for optimal solutions. I'm looking to make the actors impulsive - making rudimentary decisions based on fuzzy inputs about what they care about or don't. I'm aiming to understand the problem area better not derive answers. All the textbooks I've found seem to be about real-world economics or how to solve complex theoretical problems, neither of which are terribly relevant to the actor's decision making.

  Read the article

• Microsoft Azure News: Capturing VM Images

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2014/05/21/microsoft-azure-news-capturing-vm-images.aspxIf you have a Virtual Machine (VM) in Microsoft Azure that has a specific configuration, it used to be difficult to clone that VM. You had to sysprep the VM, and clone the data disks. This was slow, prone to errors, and stopped you from being productive. No more! A new option, called Capture, allows you to easily select a VM, running or not. The capture will copy the OS disk and data disks and create a new image out of it automatically for you. This means you can now easily clone an entire VM without affecting productivity.  To capture a VM, simply browse to your Virtual Machines in the Microsoft Azure management website, select the VM you want to clone, and click on the Capture button at the bottom. A window will come up asking to name your image. It took less than 1 minute for me to build a clone of my server. And because it is stored as an image, I can easily create a new VM with it. So that’s what I did… And that took about 5 minutes total.  That’s amazing…  To create a new VM from your image, click on the NEW icon (bottom left), select Compute/Virtual Machine/From Gallery, and select My Images from the left menu when selecting an Image. You will find your newly created image. Because this is a clone, you will not be prompted for a new login; the user id/password is the same. About Herve Roggero Herve Roggero, Microsoft Azure MVP, @hroggero, is the founder of Blue Syntax Consulting (http://www.bluesyntaxconsulting.com). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• Play the Microsoft Game “Are You Certifiable?”

  - by Mysticgeek

  Want to know if you have what it takes to be certified by Microsoft? Today we check out an enjoyable way to practice and test your IT knowledge of Microsoft products.  There are two modes, one where you log in with your Live account so you can save your progress, and play additional levels.   If you log in with your Live account, it’s obvious that Microsoft wants to sell you some certification courses, so just be aware of that. Or Guest Play where you can only play one episode and scores are not saved.   Playing the Game We’ll take a look at the Guest Play just so you get a sense of what the game is about. Enter in a username and pick an avatar… Then read the instructions…we won’t go over them all here, there are a lot of options and points are scored by correct answers, amount of time it takes to answer them, you get vouchers to play a question before answers are shown…etc. Once you start playing, you get certification questions, you can take as much time to read the question as you want, then hit the Answer button when you’re ready. Now you have four answers to choose from…notice the time clicking down, so you want to try to answer as quickly as possible. After selecting the answer, you’re told if it is correct or not, then given an answer explaination, along with your score. You can flag the topic so it comes up again, which is a good way to get repetition of various topics, which really helps when taking the cert tests. If you get an answer wrong, you still get an answer explanation which is cool, so you can learn and better understand the topic. Conclusion This game is definitely not for everyone, only those who are curious or want a fun way to practice for Microsoft certifications. If you are interested in a cert from Microsoft, it’s a fun way to practice up. Play Are You Certifiable? Similar Articles Productive Geek Tips Geek Fun: Play Alien Arena the Free FPS GameFriday Fun: Get Your Mario OnFriday Fun: Play Bubble QuodFriday Fun: 13 Days in HellFriday Fun: Open Doors TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3

  Read the article

< Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496  | Next Page >