Search Results

Search found 11115 results on 445 pages for 'disk monitoring'.

Page 49/445 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Backup and rescue disk creation

    - by Polppan
    I am in the process of backing up my PC using "Macrium backup and restore". I have successfully backed my PC, (both C and D drive) to an external hard disk. I have a question regarding creating rescue disks. I am following the steps as mentioned in this document. If I am creating an ISO file based on the document, how it is relates to the backup I have taken to my external disk ? I see no relation between creating rescue disks and backup data or am I missing something obvious? Any insight will be highly appreciable...

    Read the article

  • Large file copy from NFS to local disk performance drop

    - by Bernhard
    I'm trying to copy a 200GB file from an NFS mount to a local disk. The local disk is an XFS filesystem on a LVM on top of a RAID 5 system (hardware RAID controler). I'm using rsync to monitor the transfer speed. At the beginning the IO speed is about 200MB/s, stable for the first 18GB. But then the performance drops by a factor of 10-20 and never recovers to the initial rate. Sometimes it reaches about 50-100MB/s but just for a few seconds and then the process seems to hang for a bit. At the same time all file-stat operations on the target filesystem are blocking for a long time (minutes). Also interrupting the copy process blocks for several minutes, a sub-sequent delete of the partly copied file takes also several minutes. Any ideas what could be causing this?

    Read the article

  • script Disk Management configuration

    - by Joseph
    I have 10 workstations with large monitors that have USB slots and several card readers built in. The card readers cannot be disabled and will map to drive letters when I image the computers. I go into Disk Management and delete the drive mappings and add mappings to a single folder in C:\ with a folder for each slot. I have to do this because of scripts that run that are expecting specific letter drive mappings to network resources. Is there a way to script the deleting and adding of drive mappings instead of having to use the Disk Management GUI manually on each workstation? The workstations are running XP Professional.

    Read the article

  • Prevent Mac OS X from prompting disk initialization/formatting

    - by Just-A-User.A-Superuser
    I have a TrueCrypt partition. When I insert it in Mac OS X, it always prompt me to initialize the hard disk. Is there a way to prevent Mac OS X from detecting uninitialize hard disk? [UPDATE] By the way, as Truecrypt suggested while I'm in Windows, I must make partitions so the OS won't detect the hard drive as uninitialized. Windows respected that the drive already have contents by the mere fact that it has partitions, while Mac OS X thinks that it is still uninitialized. I think Mac OS X is trying to be smart by detecting if each partition has a valid filesystem id/marker.

    Read the article

  • windows 2000 freezing during large disk write

    - by robert
    We have a windows 2000 sp4 server which freezes up for about 1 minutes while its web-app does a ~500mb write operation. I can see the webapp start to do I/O activity (through process explorer) then the RDP session becomes unresponsive, you can click on windows and buttons but nothing happens. When the disk write finally finishes the session 'catches up' on all the mouse clicks you did during the freeze in a mad flurry of window activity and the server returns to normal. During the freeze the web-app stops as well. The same behaviour happens on the console of the server. (so I know its not a network thing) Nothing appears in the Event logs. Its like nothing happened. I have upgraded all the HP hardware drivers to the latest proliant support pack. And also run a HP hardware diagnostics which found nothing wrong. What would cause a disk write to lock the rest of the OS?

    Read the article

  • Reclaiming deleted disk space from file vault

    - by cbrulak
    I have my main user account encrypted with file vault. After deleting some data (like 20 GB) my free space on the hard drive hasn't change (yes I emptied the trash, confirmed that the files are actually gone, etc,etc). I also tried "erasing free space" in the disk utility app. I logged off, and rebooted and so far that space hasn't been reclaimed. I'm assuming file vault or disk utility has some method of reclaiming but I can't find it. Any ideas?

    Read the article

  • Hard Drive Bad Sector marking utility

    - by Kevin Boyd
    I already have Windows XP, During installing Ubuntu(dual boot) the disk drive just stuck up at one place and doesn't seem to move ahead.. Is there a disk bad sector mark utility that just marks these sectors so that the disk doesn't seek them later. I tried running Seagate Seatools on the drive but both the short test and long test fail even before they start even chkdsk /f/r doesn't seem to work as the system locks up at stage four.

    Read the article

  • Run disk error check on NTFS file?

    - by paulius_l
    I have a feeling that my system hard drive is dying. Benchmark kind of enforces it. Here is the benchmark of my system hard drive during low system activity: And here is the benchmark of backup drive: Furthermore, there are some files which I just can't touch because I get CRC errors and the hard drive activity spikes to 100% with operating speeds less than 1 MB/s while working with such files. I haven't yet tried swapping SATA cable as I have read this might cause the problems. Anyway, I would like to run some tests on specific clustsers where those files I am interested in are stored. I don't want to do the full chkdsk because it takes a very long time. I would like to either find the utility which executes the disk check directly on the clusters where the file belongs or a couple utilities where one tells me the cluster locations and another can check just those locations. How do I check and possibly fix disk errors where the files I am interested in are stored? Edit: S.M.A.R.T. info:

    Read the article

  • Minimize VirtualBox Hard Drive disk

    - by Aviv
    I have Ubuntu Server 10.04 TLS installed on a Virtual Machine in a VirtualBox. The size of the Hard Drive is dynamic growing hard drive and the maximum is 32GB. At the beginning i had 4GB on the Hard Drive and the size of the .vdi was 4GB. Lately the size of data on the disk is 15GB but the size of the .vdi is almost 32GB. Why is that? How can i pack / optimize / defrag the HD so it will be the same size of the data on the disk? Thanks.

    Read the article

  • kernel warning disk error for command write - solaris svm

    - by help_me
    Recently this warning came up on my message logs, scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): Oct 27 00:14:44 Error for Command: write(10) Error Level:Retryable Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Requested Block: 101515828 Error Block: 101515828 Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0441B9B5H Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Sense Key: Hardware Error Oct 27 00:14:44 scsi: [ID 107833 kern.notice] ASC: 0x19 (defect list error), ASCQ: 0x0, FRU: 0x2 This is showing signs of disk failing in my opinion. I have not seen the messages re-occurring. This is on a Solaris 9 Sparc system V240. The disks are managed by SVM and "metadb" is showing the flags as "a" Are there any tests or indications as to check/see if the disk is actually failing or was that error message initiated by something else. Thank you!

    Read the article

  • How to change hybrid disk to basic disk in windows 7?

    - by Marco
    I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

    Read the article

  • When copying VM filesystem over netcat, dd copies double the disk size

    - by JivanAmara
    I'm attempting to copy the disk of a working headless virtualbox VM (VM1) on one server to a new VM (VM2) on a vCloud server. I don't have access to the host of VM2. The OS is Windows Server 2003 (32-bit) I start both VMs with a live Knoppix image. I run 'nc -l | dd of=/dev/sda bs=512' on VM2 I run 'dd if=/dev/sda bs=512 | nc ' on VM1 I previously did this with another windows VM and it worked fine. VM1 has a disk of size ~70GB (verified with fdisk); however, the amount of data dd reports read/written is ~139GB. Of course the target machine doesn't work properly. I get a Windows splash screen, then blue error screen with general 'system not working' information. I'm at a loss what could cause this. Any ideas?

    Read the article

  • DISK BOOT FAILURE after upgrading power supply

    - by Phenom
    After upgrading my power supply, I get the following error message when trying to boot into Windows 7. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER My Windows 7 installation is on a SATA hard drive. I'm able to fix this problem if I hook up my IDE hard drive, then it boots the SATA hard drive fine. I don't like this solution though because then that means my IDE hard drive is drawing power even though it isn't being used. Why would a newer power supply need the IDE hard drive hooked up just to boot into the SATA hard drive? There are no boot files on the IDE hard drive; it is completely empty. My old power supply did not need it hooked up in order to boot the SATA hard drive.

    Read the article

  • Updating windows xp hard drive controller from ubuntu live disk

    - by Joel
    The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

    Read the article

  • Can't Read/Write the Hard disk used in NAS

    - by mgpyone
    I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

    Read the article

  • How can I tell if my live web-server is overloaded?

    - by Nick G
    We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

    Read the article

  • Volume expanded in Volume Group, old disk reduced but still in use in system

    - by Yurij73
    Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

    Read the article

  • How to back up initial state of external backup drive?

    - by intuited
    I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

    Read the article

  • "Disk boot failure" error after installing Windows 7 on SSD

    - by Tony_Henrich
    I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

    Read the article

  • Linux cannot alter partition table of main hard disk of my laptop

    - by djechelon
    I run openSUSE 12.2 on my ASUS N76VZ laptop. My problem is that I cannot alter the partition table of first hard disk /dev/sda1. YaST partitioner says it's unreadable, but actually it can read it but not alter it. It doesn't tell me anything else, except that I can wipe the partition table (having to reinstall Windows for the third time). Since I want to create new partitions on that disk, how do I fix the partition table layout? I could create new partition from Windows Computer Management and format them in Linux. I could do this, but it doesn't explain the problem

    Read the article

  • Procedure for dual booting (2 copies of Win-7) off 2 partitions on same disk

    - by Sam Holder
    What procedure should I follow to set a dual boot (both Win-7 x64) on a machine where (ideally): Both operating systems will be installed on the same physical disk in different partitions When booting into either operating system the contents of the other OS partition disk will not be seen (this just seems safer) Other hard drives in the system will be visible by both OS's 1 copy of Win7 is already installed. Is it as simple as shrinking the existing volume and creating the partition, then sticking the CD in and booting off it and formatting the new partition and then installing another copy of windows onto the new partition? Or will that not work? Or are there gotchas?

    Read the article

  • scsi and ata entries for same hard drive under /dev/disk/by-id

    - by John Dibling
    I am trying to set up a ZFS pool using 4 bare drives which I have attached to my Ubuntu system via a SATA hot swap backplane. These are Hitachi SATA drives. When I list the contents of /dev/disk/by-id, I see two entries for each drive: root@scorpius:/dev/disk/by-id# ls | grep Hitachi ata-Hitachi_HDS5C3030ALA630_MJ1323YNG0ZJ7C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1064C ata-Hitachi_HDS5C3030ALA630_MJ1323YNG190AC ata-Hitachi_HDS5C3030ALA630_MJ1323YNG1DGPC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG0ZJ7C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1064C scsi-SATA_Hitachi_HDS5C30_MJ1323YNG190AC scsi-SATA_Hitachi_HDS5C30_MJ1323YNG1DGPC I know these are the same drives because I wrote down the serial numbers, and all the other drives in this system are either Seagate or WD. The serial number for the first one, for example, is YNG0ZJ7C. Why are there two entries here for each drive? More to the point, when I create my ZFS pool which one should I use; the scsi- one or the ata- one?

    Read the article

  • Detach Disk from deleted virtual machine

    - by user1628043
    I had an Virtual Machine running in Azure for a couple of weeks and suddenly it stopped responding. I shut it down and tried to restart it but that failed saying the VM faulted. I then deleted the VM which leaves the VHD file intact on my storage account. I was intending to try recreating a new VM using thie VHD from the first VM however, the OS disk and Data disk are both still marked as being attached to the original VM which no longer exists. Is there any way to detach these disks so I can use them to create a new VM?

    Read the article

  • Can I recover files on a disk With 5% of start of disk completely wiped (overwritten with 1s)

    - by ARA
    Recently a virus attacked my pc and cleared 5% of my hard disk which has one partition I viewed the disk in a hex viewer program like active undelete ,cleared the virus data and overwrote it with 1s I want to recover a large file that is about 10gb, but no recovery tools seem to be able to recover any files. I want to know ,in theory, is this file recoverable ? I think that files are fragmented, researched about NTFS File System and i understand cluster information are just saved in MFT File ? Is there any way to recover file without a MFT structure ?

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >