Search Results

Search found 16418 results on 657 pages for 'either'.

Page 49/657 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• Windows Home Server installation fails because it can't find the DVD drive anymore

  - by BBlake

  I've got an old Dell Dimension 8300 desktop I decided to convert into a WHS box. I popped in a pair of 1 TB SATA drives, which were recognized fine by the BIOS and the currently installed OS (XP), so I decided to go ahead and install WHS. Near the end of the installation, WHS acts like it can no longer find the DVD drives (either of them, the box has a DVDROM and a DVDRW). The specific error is gives is the "Can't configure storage" error. I've found several forums where people say they get this error if they remove the boot DVD during the installation (at the time of the first reboot). However, I never removed the DVD. After the error, if fails into WHS, so it did mostly install and I can work with WHS. However, it refuses to recognize the network card, video card and while it shows the two DVD drives, any CD/DVD I insert in either drive the system says is corrupted and unreadable, even though none of them are. I've tried several reinstalls both removing and not removing the DVD, but the result is the same regardless. Any other tricks anyone found? If I can't figure this out, maybe I'll just install SBS2008 and fake it up to be similar to WHS with some addin tools. Shouldn't be too hard to create something since WHS is based on SBS2003 anyway.

  Read the article

• Redirect specific domains with DNS

  - by user66377

  Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

  Read the article

• Load Sharing Regarding Large Websites

  - by JHarley1

  Hello, I have a question regarding Load Sharing for large websites. My Understanding: So if you have a website that has millions of fits a day you will need to have an architecture that can support this sort of pressure. You can either do one or two things: Invest in a single large server that has huge amounts of processing power, memory and storage (such as Microsoft's TerraServer). Spread the load of your website across a number of machines. Let me tackle the second approach, so you have a collection of machines all running Web Server Software and all having access to identical copies of the websites pages. You can either spread the load across these machines using a cyclic pattern in a DNS or you can use a Load Ballancing Switch. The advantages of this approach is: - Redundancy - servers can fail and the others would "pick up the slack" - Incremental - the ability to easily add new machines to this set-up. My Question's Is there a Virtual approach to this issue of load balancing now? If the website runs from a database - is there still only a single copy of the database? If a user had a session running on one Server (e.g. they had gone to www.example.org and had been assigned to Server 2 - were they had created a session) if they refreshed the website (and were allocated Server 3) would they still have their session? What are the other disadvantages associated with Load Balancing? Many Thanks, J

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• Desktop virtualization

  - by gurpal2000

  Is there currently a proper Type 1 "desktop" hypervisor? Either free or not? This is just for tinkering around at home on some beefy Phenom machines. Basically i want to be able to run say 2 OSs on the same PC but without loading windows or a heavy flavour of linux and then use a hotkey to switch between them. I should get full performance out of them. So do i need something better than vmware workstation and/or virtualbox. I think these are "Type 2"? I already run VMWare w/s and VBox but is there a more performant solution? I saw a YouTube video from Citrix where a laptop was running XP and Vista. With the touch of a hot key they could switch between them. There was no visible underlying OS (there might be a hypervisor)? I have access to Citrix XenDesktop 3 enterprise edition evaluation. I realise this isn't for desktops but can i achieve my goal (geekiness) ? If i use the free XenServer 5.5.0 how do my client PCs access windows/linux/whatever from the xenserver? Is it via a thin client RDP type application? If so if there one for both windows and linux? Also if i do use XenServer can i use USB in either direction? What is Citrix receiver can i use that for (3) ? If so, is there some hotkey i can configure? whatever client is used to access the server software (whether it be on a different server or local) can i get full opengl/directx acceleration? what about Xen? i tried the Xen LiveCD but no clue as how to configure it. As you can see much confusion. Any help/pointers welcome. Cheers.

  Read the article

• APC Smart UPS network shutdown issue

  - by Rob Clarke

  Here is a bit about our setup: We have 2x Smart-UPS RT 6000 XL units with network management cards We are running Powerchute from a network server Powerchute is connected to the management cards of both UPSs UPSs are set to do a graceful shutdown via Powerchute when the battery duration is under 20 minutes We also have a command file that runs with Powerchute Although our setup is redundant we do not have an equal load on each server due to APC switches for single power devices The problem is that as we do not have an equal load on each server the batteries drain at different rates. This means that the UPSs both get to the specified low battery duration at completely different times. The problem here is that UPS 1 may have run down to 5 minutes and is in desperate need of initiating a Powerchute shutdown - UPS 2 still has 25 minutes of runtime so no shutdown is initiated. Consequently UPS 1 goes down and takes all the servers with and then shuts down UPS 2 as well! What we need to happen are 1 of either 2 things: Powerchute initiates the shutdown as soon as either UPS reaches the 20 minutes low battery duration setting - and doesnt wait for both The UPS with the heavier load expends its entire battery but does not shutdown both UPSs and lets the load be switched across to the UPS that still has runtime remaining. That way when the UPS that still has runtime reaches its low battery duration it can proceed with the graceful shutdown via Powerchute. Hope that makes sense, any help is greatly appreciated!

  Read the article

• BIND9 server types

  - by aGr

  I was configuring DNS on my server using BIND9, everything seems to work, but I have a question regarding my config file. I've ended up with this configuration in /etc/bind/named.conf.local zone "example.com" { type master; file "/etc/bind/db.example.com"; allow-transfer { 192.168.1.1; }; }; zone "1.168.192.in-addr.arpa" { type master; notify no; file "/etc/bind/db.192"; allow-transfer { 192.168.1.1; }; }; forwarders { 10.253.22.140; 10.253.22.141; }; I've read about the different type of dns server, like primary master etc. The first two parts (zone and zone) corresponds to primary dns server configuration. First record for "classic" lookup, second one for reverse. The last part (forwarders) is configuration of cache-server and contains the ISP's IP of DNS server. So all names resolved thanks to this server will be cached. Simple question: am I right? Does my description make sense? Or one server can be only either master or either cached?

  Read the article

• pppd disconnects from 3G, doesn't reconnect, w/ persist set

  - by bytenik

  I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

  Read the article

• Experiences in Upgrading from Exchange 2003 to Exchange 2010

  - by gWaldo

  I'm currently running Exchange 2003 SP2 Cluster on a Server 2003 AD Forest (in native 2003 mode), and we beginning to plan the upgrade to Server 2008 AD and Exchange 2010. We have two main sites, one middle-sized office, and a couple of smaller sites which have DCs (which may be RODCs after the upgrade). Currently all of our Exchange cluster is in my main site, but we are considering using the new datastore paradigm for load-balance/failover at the other large site, but this is not set in stone. Right now we are in the information-gathering and planning phases. I am looking for input of any gotchas experienced while performing either upgrade, but especially the Exchange upgrade. Gotchas? What surprised you? What wasn't documented? What said one thing but was misleading? (Confusing either in content or severity.) What is great or horrible about the new system? What worked well? What worked poorly? If you were to do it over again...? (I know that this isn't so much a question that can be definitively answered, but I'm happy to reward insight and useful resources (not the Microsoft documentation, but Blogposts are welcome) with upvotes.) UPDATE A couple items of note: -We are not currently using OWA (currently only the admins), but it may become more of a consideration with iOS devices. -We do have a small number of Blackberries in the environment (< 10%). -In addition to the standard Exchange connectors, we have a third-party connector for Captaris RightFax integration.

  Read the article

• DLINK WBR-1310B Wireless Router seems to hang...

  - by Ira Baxter

  I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it the neighborhood computer junk store). I am using it at home (and in fact am using it this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other internet service) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Rebooting fixes it. Its brand new. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anyboyd else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK becuase a previous Linksys died of apparant heating problems). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy?

  Read the article

• VPN - Accessing computer outside of network. Only works one way

  - by Dan

  I could use some help here. My ideal goal is to create a VPN for 2 macs that are in different locations so that they can share each others screens and share files. I basically want to do what Logmein's Hamachi does, but without the 5 user limitation. I have set up the VPN on my Synology NAS at my house using the PPTP protocol. I could also use OpenVPN. The good news is that I can use a laptop outside of my home network to access any computer on my network at my house. The bad news is that I can not do the reverse. I want to use a computer in my home network (same network as the VPN server) to access a computer outside of my network (which is connected via VPN successfully). My internal IP is 192.168.1.xxx PPTP VPN assigns my laptop that is outside of my network with 192.168.5.xxx, but when I try to access it remotely either with afp://192.168.5.xxx or vnc://192.168.5.xxx I can't connect using either. Is this something that I should be able to do or is VPN only one way? I've also tried openvpn with the same results. Thanks for any help! -Dan

  Read the article

• SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

  - by Abel

  The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

  Read the article

• Remote Socket Read In Multi-Threaded Application Returns Zero Bytes or EINTR (104)

  - by user39891

  Hi. Am a c-coder for a while now - neither a newbie nor an expert. Now, I have a certain daemoned application in C on a PPC Linux. I use PHP's socket_connect as a client to connect to this service locally. The server uses epoll for multiplexing connections via a Unix socket. A user submitted string is parsed for certain characters/words using strstr() and if found, spawns 4 joinable threads to different websites simultaneously. I use socket, connect, write and read, to interact with the said webservers via TCP on their port 80 in each thread. All connections and writes seems successful. Reads to the webserver sockets fail however, with either (A) all 3 threads seem to hang, and only one thread returns -1 and errno is set to 104. The responding thread takes like 10 minutes - an eternity long:-(. *I read somewhere that the 104 (is EINTR?), which in the network context suggests that ...'the connection was reset by peer'; or (B) 0 bytes from 3 threads, and only 1 of the 4 threads actually returns some data. Isn't the socket read/write thread-safe? I use thread-safe (and reentrant) libc functions such as strtok_r, gethostbyname_r, etc. *I doubt that the said webhosts are actually resetting the connection, because when I run a single-threaded standalone (everything else equal) all things works perfectly right, but of course in series not parallel. There's a second problem too (oops), I can't write back to the client who connect to my epoll-ed Unix socket. My daemon application will hang and hog CPU 100% for ever. Yet nothing is written to the clients end. Am sure the client (a very typical PHP socket application) hasn't closed the connection whenever this is happening - no error(s) detected either. Any ideas? I cannot figure-out whatever is wrong even with Valgrind, GDB or much logging. Kindly help where you can.

  Read the article

• Seagate 3TB ST3000DM001 hard drive not recognized by Linux, causes fdisk to hang

  - by MountainX

  I'm running Kubuntu 12.04. I have a brand new, never used Seagate 3TB ST3000DM001 hard drive. It's an internal drive. I installed it in a USB enclosure. When I connect it to my PC, nothing happens automatically. When I run sudo fdisk -l, fdisk hangs (without reporting this drive) until I disconnect this drive from the USB port. blkid won't report it either. I tried connecting it to both USB 2.0 and USB 3.0 ports on my PC. I got the same result either way. I tried two different USB enclosures with the same result. If I take the same drive, same enclosure and connect it to a Windows 7 laptop, it is recognized automatically as a USB mass storage device. I want to format the drive (probably ext4) and copy files to it. I have another drive, also in a USB enclosure, that is connected via USB 3.0 to this PC and it works fine. It's a 2.0 TB Samsung HDD. I plan to copy files from the 2TB to the 3TB drive, once I get this issue resolved. My motherboard is an Asus Asus P8B WS LGA1155/ Intel C206/ Quad CrossFireX/ SATA3&USB3.0/ A&2GbE/ ATX. What is the resolution?

  Read the article

• How do I make wallpaper fit both monitors in dual monitor setup?

  - by Ben

  I am deploying some custom corporate wallpaper as part of a Windows 7 rollout. Some people will be using dual monitors, and the additional monitors may be either 4:3 or widescreen. I want to use the same wallpaper on both screens (i.e. 2 copies of the same wallpaper, not stretched across both.) If I set the background to "stretch", it uses the aspect ratio of the primary monitor to stretch the wallpaper on both monitors. So, for example, if I have a dual monitor setup using a 4:3 TFT as primary and my (widescreen) laptop LCD as secondary - the image shows on the laptop LCD in 4:3, with a black stripe down either side. I've only noticed this as an issue with my "custom" wallpaper. Both the default MS wallpaper and the built in Lenovo wallpaper don't seem to have this issue. Is this by using "trickery" such as using an image larger than the largest resolution you will have and centering it? (i.e. so you crop out part of the image.) Or can this be done "properly"? I don't want to use 3rd party software to do this, but would happily do a bit of Powershell scripting if this would solve the issue. Thanks in advance, Ben

  Read the article

• CloneZilla Broke My System? Ubunut Installation Lost After Running CloneZilla

  - by nicorellius

  I just read through this post and tried to get my installation back using this answer to no avail. What happened to me is this: I spent an hour or more reading through the CloneZilla docs. I thought I was ready to test it out so I burned the disc with the ISO image on it and ran it. The system I used was Ubuntu 10.04, 32-bit. Everything seemed to go fine. I made a clone of my first partition and copied it to my second partition. I followed the instructions, removed the disc and rebooted my system. At this point, I would expect to have two bootable Linux installations, identical to one another. However, upon booting, I got this error message: error: no such device: 4cf1a6ef-xxxx-xxxx-xxxx-4e3a3ce92bcd error: file not found I booted from a Live Ubuntu disc and was able to see my to partitions: 4cf1(1) and 4cf1(2) (abbreviated, because the volumes have long numbers to identify them). The 50 GB partition, on which the original Ubuntu installation sits is the number and the second partition (175 GB) is the same number with an "_" at the end. I could browse the disc partitions and see the files, but I'm not sure what to do next. I know there is a way to restore my grub loader and actually boot either of these installations, but my Linux know-how is limited. Can I edit the boot loader file to fix this problem? The only clue I have is CloneZilla said something about making a new GRUB but I thought it was going to basically modify it so I could boot either installation. Not sure what happened. I am going to look through this post for the time being to see if I can learn anything to help my problem. But I thought that, since this happened as a result of using CloneZilla, it may be a unique question for this board.

  Read the article

• Scripting an 'empty' password in /etc/shadow

  - by paddy

  I've written a script to add CVS and SVN users on a Linux server (Slackware 14.0). This script creates the user if necessary, and either copies the user's SSH key from an existing shell account or generates a new SSH key. Just to be clear, the accounts are specifically for SVN or CVS. So the entry in /home/${username}/.ssh/authorized_keys begins with (using CVS as an example): command="/usr/bin/cvs server",no-port-forwarding,no-agent-forwarding,no-X11-forwarding,no-pty ssh-rsa ....etc...etc...etc... Actual shell access will never be allowed for these users - they are purely there to provide access to our source repositories via SSH. My problem is that when I add a new user, they get an empty password in /etc/shadow by default. It looks like: paddycvs:!:15679:0:99999:7::: If I leave the shadow file as is (with the !), SSH authentication fails. To enable SSH, I must first run passwd for the new user and enter something. I have two issues with doing that. First, it requires user input which I can't allow in this script. Second, it potentially allows the user to login at the physical terminal (if they have physical access, which they might, and know the secret password -- okay, so that's unlikely). The way I normally prevent users from logging in is to set their shell to /bin/false, but if I do that then SSH doesn't work either! Does anyone have a suggestion for scripting this? Should I simply use sed or something and replace the relevant line in the shadow file with a preset encrypted secret password string? Or is there a better way? Cheers =)

  Read the article

• Window 7 Host does not answer to ping

  - by gencha

  Today I tried printing on a shared printer on one of our homegroup members. Sadly it did not work (printer marked as offline). Shortly after, I noticed I can't even ping the machine that owns the printer (I also can not remotely access it in any other way I've tried). Currently I'm trying to ping the machine from the router both computers are connected to (and my machine in question doesn't answer). I do receive the echo requests (as verified with WireShark). I also added a rule in the Windows Firewall to specifically allow ICMP echo requests, but that didn't change anything. I also tried netsh firewall set icmpsetting 8 enable, but that didn't change anything either. Completely disabling the Windows Firewall has no effect on the issue either. One has to wonder, where does Windows log when and why it ignored any incoming packets? How can I get to the bottom of this? Here are some ways I found to dig deeper into the issue: Enabling logging on the Windows Firewall Enabling Windows Filtering Platform Auditing Both methods at least give more insight into the issue. The plain log file is full of entries like this: 2011-11-11 14:35:27 DROP ICMP 192.168.133.1 192.168.133.128 - - 84 - - - - 8 0 - RECEIVE So the ICMP packets are being dropped as if that was intended. The Event Viewer now gives a little bit more details: The Windows Filtering Platform has blocked a packet. Application Information: Process ID: 4 Application Name: System Network Information: Direction: Inbound Source Address: 192.168.133.1 Source Port: 0 Destination Address: 192.168.133.128 Destination Port: 8 Protocol: 1 Filter Information: Filter Run-Time ID: 214517 Layer Name: Receive/Accept Layer Run-Time ID: 44 This same entry is always repeated with 2 points of information changing: Process ID: 420 Application Name: \device\harddiskvolume2\windows\system32\svchost.exe The service host with the PID 420 is the host for the following services: Windows Audio DHCP Client Windows Event Log HomeGroup Provider TCP/IP NetBIOS Helper Security Center Additionally, there is currently this problem with the same machine: Even though my network is set to be a "Home network", I am unable to create a new homegroup.

  Read the article

• fail2ban block ports rules iptable

  - by J Spen

  I just installed Ubuntu Server 14.04 and don't have much experience with IPtables. I am trying to get a basic setup going where I only accept SSH connections on port 22 and 2222. I actually have that working with no problem using fail2ban ssh. Then I wanted to block all other ports except 423 and 4242 but either method of DROPing all connections that are not listed seems not to work and it blocks me out of everything. Below is the setup that works: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN I tried to change it either to: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN or: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A INPUT -j DROP -A fail2ban-ssh -j RETURN I have noticed that the rules for fail2ban-ssh are automatically added to my iptables on boot because if I save them with iptables-persistant they are entered twice. How do I go about blocking everything accept those 2 ports using fail2ban? Is it a bad fail2ban configuration or do I need to add the fail2ban-ssh -j Return somewhere else in my code.

  Read the article

• Internet Troubles - PPPoE vs PPPoA?

  - by AkkA

  I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

  Read the article

• VPN Client solution

  - by realtek

  I have several VPN's that I need to establish on a daily basis but from multiple workstations. What I would like to do it have either a server or vpn router that can perform this connection itself and that I can then route traffic through this device or server depending on the subnet I am trying to reach. The issue is that I only use VPN Clients to connect, so I am basically trying to achieve almost a site to site VPN but by using basically a VPN Client type connection from my network. The main VPN Client I use is the Sonicwall Global VPN Client where I initially use a Preshared Key and then it always prompts me for a username and password (not RSA key). My question is, is there any type of linux distro or even a hardware vpn router that can do this and connect to a Sonicwall device as if it were a client? I have tried pfSense which is very good but it fails to connect, probably due to a mismatch of settings. I have tried many others. Even dd-wrt on my router but it does not support whatever protocol Sonicwall uses. (I thought L2TP/IPSec) but it appears it may not be that. Any advice would be great! The other other thing I have thought of that I have not tried yet is Windows Server Routing and Remote Access but I have a feeling that won't work either. Thanks

  Read the article

• Laptop battery holds charge, but won't charge any more.

  - by Jeff

  Ok, I'm sure I will need to replace either my battery or my AC adapter, but would rather not buy one if the other is the problem. My problem is. I have a Sager laptop that gets quite a bit of use. The charging has always been a little bit odd. If I was in the process of using it, it would charge just fine and stay On AC power. If I left it alone, however(power settings to ONLY turn off the monitor) in either Ubuntu or Windows 7 it decides that it didn't want to use AC power anymore and would just start draining the battery until it died. Now, suddenly, it won't charge at all. The capacity was great up to this point which happened in an instant. It will recognize the battery but won't see the AC power if plugged in while the battery is in. I can power up the laptop without the battery and it works fine. If I plug in the battery while powered up it will claim it's charging it, but it stays at the same percentage. If I unplug the power, it will switch over to Battery fine, but I have to power down and unplug the battery to get it back on AC power. I've had dying/dead batteries before but they typically won't hold a full charge anymore but it still winds up to 100% then drops quickly when unplugged. This seems more like a chip problem in the battery to me, but I'm not sure. Any ideas?

  Read the article

• MSSQL Timing out, a couple of questions...

  - by user29000

  Hi, About once a week, my MSSQL server is timing out, or rather the machine runs out of RAM. This morning it reached 3.9GB of the available 4, with MSSQL taking up 2.5GB. I'm concerned that i've not configured SQL to release memory as it should, so I ran sp_who2 while the timeouts were occuring to see what process were running. If i could post the CSV datafile i would, however, there were 85 processes in total, mostly related to the Full Text service: FT Gatherer - About 35 of these running under the 'sa' account against the master database with status of either sleeping or background, many were dependant on other processes. Is that normal? MySite database - There were only 5 processes for the one active site/database and all were either sleeping or suspended - but their lastBatch dates were set to 1/12/2020. Is that normal? The datbase is only about 20mb in size the traffic levels are very low, so i'm thinking of maybe limiting the amount of RAM SQL has access to (from unlimted to maybe 2GB). Any thoughts / advise would be appreciated. Mny thanks Ben

  Read the article

• Errors with Using Webcam

  - by C.G.

  I have been having some issues accessing a webcam from my machine. Sometimes (not always) when I run a program that accesses the device (cheese, guvcview, and code using openCV), I get either of two messages, which lead to the program crashing. The first occurs after running the webcam for some time. libv4l2: error dequeuing buf: No such device VIDIOC_DQBUF: No such device The other will occur without even letting me have a chance to run the webcam. libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON - Unable to start capture: No space left on device Occasionally after getting these errors I will also receive a message saying that no such device can be found for subsequent runs. Other than the times that the "No device found" message appears the webcam appears when I use lsusb. My machine runs Linux Fedora 16, and the webcam is a Logitech C920. I do have ffmpeg installed, and I have been able to run the web camera many times in the past without errors. What is particularly puzzling about these errors is that they just sprung up this past weekend. No new software or hardware has been installed on this machine recently; I haven't changed any settings recently either. It could possibly be a driver issue, but I don't know what could have changed which could lead to this issue. Any attempts at researching this problem has been fruitless as this seems to most commonly occur with multiple webcams. I am only working with one device. I'd appreciate any advice for this problem, as this has become a bit frustrating.

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >