Search Results

Search found 16418 results on 657 pages for 'either'.

Page 50/657 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Multimaster Keepalived Configuration (Virtual IP with Load Balancing)

  - by Rad Akefirad

  Here are requirements: 1. High Availability 2. Load Balancing First configuration 1. Two linux servers have been configured with one static IP for each: 10.17.243.11, 10.17.243.12 2. Keepalived has been installed and configured with one VRRP instance to provide one virtual IP (10.17.243.10 as VIP, 10.17.243.11 as master and 10.17.243.12 as backup). 3. Everything works fine. The VIP is assigned to the master server (10.17.243.11) as long as it is up and running. As soon as it goes down, the VIP will be assigned to the backup server (10.17.243.12). 4. The problem here is all communication goes to the master server. Second configuration 1. I found active-active configuration for Keepalived which is possible by defining more than one VRRP instance. So that both server have two IPs (real 10.17.243.11 and virtual 10.17.243.10 for server #1 and real 10.17.243.12 and virtual 10.17.243.20 for server #2. 2. Everything works fine. we have two VIPs which are accessible (HA). But all communication coming to each IP still goes to one single machine (either server #1 or #2 depending on the IP). However I found some tricks on the DNS to overcome this limitation. But it's not acceptable in our case. Question: Is there any way to have one virtual IP which is assigned to both servers? By that I mean both servers are handling some part of workload (like the thing we do in web server load balancing)? By using either keepalived or some other tools? Thanks in advance.

  Read the article

• Can't seem to get chassis fans running

  - by TK Kocheran

  I've got a ASUS ROG Maximus V Extreme and I'm trying to connect my fans to the chassis fan pins to get them running according to the motherboard. I know for sure that my fans work, as when I test them with my Molex connector, they all happily power on. Here's two of my chassis fans connectors (there are 3-4): Here's the connector that came with either my motherboard or the PSU, can't remember :) I've never seen one of these strange cables before. All I know is that if I plug in the 4-pin mobo connector to either of these fan plugs, fans don't come on and don't show up in the BIOS. (Motherboard has a crazy awesome UEFI BIOS and shows you if it sees the fans.) If I try plugging the 4-pin connection into the mobo and the other side into the PSU, I can't POST. If I plug the PSU connector in without the mobo connector, fans come on. What could I be doing wrong here? Is it a problem with the cable I'm using? Is there something I may have missed in the build?

  Read the article

• Ping and crawling not working, site still resolving

  - by Andrew Alexander

  Ok, so we're trying to figure out why the site of one of our clients isn't being crawled by Google (we've ruled out robots.txt or meta tags) When we go to the site, either IP address or domain name, the site resolves, everything works. However, Google is getting a 302 redirect (which it apparently isn't following for crawling), and when we ping the address, it times out (note, the site is still resolving in the browser throughout all of this). The site is built in ASP.Net (I assume C#) and so my thoughts were that it was an errant redirect rule, or some other sort of server side issue. We also thought that it might be due to incorrect domain pointing (but if we try to ping the IP, it doesn't work, so that sorta rules that out). We're really not sure what is causing all of these errors, or even if they have one single source. Anyone have any ideas what could be going on? Do you need any more information? To boil it down in a TL; dr: * Site resolving in browser, both IP and domain name. No problems here. * Site not being crawled by Google (gets a 302 it doesn't seem to follow) - it is not due to robots.txt or meta tags * Ping is not working for the IP address. This is very odd, because again, the IP address seems to work fine in the browser. * Our thoughts are either redirect rule issue, domain pointing issue, or possibly some errant code - or some combination of the three

  Read the article

• Server 2003 and XP Client; Why are HTTP connections being silently dropped.

  - by Asa Yeamans

  On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Self-connecting printers

  - by Martin Cerny

  Hello, I work as an administrator in a small company using XP Professional on all computers and two servers with Win 2003 Server. Recently a very unusual problam occured one of the computers keeps connecting to all the printers on the network it doesn't matter if it's an administrator or Domain User as soon as somebody logs in the commputer connects all the printers. The printers are either installed on local computers or on the server and shared. There is no log-on script connecting the printers, I install them manualy and none of the other computers shows such behaviour. We have a printer which is installed on two computers and both of them share it (I'm moving it to Server from a small PC which shared it up to now, but some computers still use the old connection), meaning this specific computer connects to one of the printer two times and it can't use either of the connections. How to prevent this self-connecting to all printers (none of the other computers has this problem). If I delte them from the "Printers" folder everything works fine untill I reconnect and the Folder is once again full of all the printers we have. I solved the smaller problem, computer is now capable of printing on all of the printers (it seems there have been some registry issues), after cleaning the registry and reinstalling the printer it seems to work just fine. But the second thing prevails, the computer connects to all the printers in the network (when I remove one/multiple it is reconnected right after the next log-in by any user).

  Read the article

• Asus K50I sound issues

  - by MrStatic

  I have an Asus K50IJ (Bestbuy) laptop and have issues with my sound. Speakers themselves work fine but when I plug into the headphone jack it auto mutes the front channel and no sounds comes out of either the speakers or the headphones. If I then unmute the channel I get sound from both the speakers and the headphones. alsamixer shows the Headphone channel as all grayed out. /etc/modprobe.d/alsa-base.conf I have tried snd-hda-intel model="asus-laptop" and snd-hda-intel model="asus" In Sound Preferences I have gone to output and changed the Connector to 'Analog Headphones' that results in no sound from either speakers or headphones. As one forum suggested I tried to comment out blacklist snd_pcsp in the blacklist.conf which resulted in no change. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Subsystem: Santa Cruz Operation Device 1043 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel

  Read the article

• Two different subwoofers aren't working on my machine or my phone

  - by Philluminati

  I have speakers that come with my computer. Two small desktop speakers and a subwoofer with a base volume control on the back. It's worked for years. I was listening to Spotify on my speakers as loud they would possibly go and with the base turned up to max and suddenly the subwoofer stopped working. I've plugged the speakers into my Android HTC Desire Z handset and again, the desktop speakers play music but the subwoofer doesn't (even after fiddling with the volume control). So I figured I'd broken it. I went to Amazon and bought a replacement one. I bought this one: http://www.amazon.co.uk/dp/B002N46YD8/ref=pe_217191_31005151_dp_1 but it doesn't work either, on either my desktop nor my Android phone. I had a play with alsamixer and the LFE and center controls are switched on and the speakers are okay... but still no base. Am I unlucky enough to bought a new subwoofer which is already broken out of the box or is there something else which is wrong and I could look into please? Are there any other tests which I could perform to see if the problem is me or not?

  Read the article

• Requests per second slower when using nginx for load balancing

  - by Ed Eliot

  I've set up nginx as a load balancer that reverse proxies requests to 2 Apache servers. I've benchmarked the setup with ab and am getting approx 35 requests per second with requests distributed between the 2 backend servers (not using ip_hash). What is confusing me is that if I query either of the backend servers directly via ab I get around 50 requests per second. I've experimented with a number of different values in ab the most common being 1000 requests with 100 concurrent connections. Any idea why traffic distributed across 2 servers would result in fewer requests per second than hitting either directly? Additional info: I've experimented with worker_processes values of between 1 and 8, worker_connections between 1024 and 8092 and have also tried keepalive 0 and 65. My main conf currently looks like this: user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; worker_rlimit_nofile 8192; events { worker_connections 2048; use epoll; } http { include /etc/nginx/mime.types; sendfile on; keepalive_timeout 0; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } I've got one virtual host (in sites available) that redirects everything under / to 2 backends across a local network.

  Read the article

• How to get Synergy working on Ubuntu 11.10 and Windows 7?

  - by Linda

  I'm using Ubuntu 11.10 32-bit and Windows 7 64-bit, however, Synergy only works when a window (application or folder) is open and touching the edge of the screen where the mouse should "jump". In other words, if a window is open and maximized, Synergy works normally. Without any windows, the mouse does not jump to the other screen. My steps: (Ubuntu) apt-get install -y quicksynergy (Windows) Install Synergy (I've tried both 1.3.8 and 1.4.8 and both 32 and 64-bit) On Ubuntu 11.10 32-bit (Synergy Server config): ~/.quicksynergy/synergy.conf section: screens myubuntu: mywin7: end section: links myubuntu: right = mywin7 mywin7: left = myubuntu end On Ubuntu 11.10 32-bit: $ /usr/bin/synergys -f --config .quicksynergy/synergy.conf ... 2012-04-25T14:04:12 NOTE: client "mywin7" has connected /build/buildd/synergy-1.3.6/lib/server/CServer.cpp,287 (output hangs here) On Windows 7 64-bit: Synergy 1.3.8 Client on Microsoft Windows 7 x86 (WOW64) started client connecting to 'myubuntu': ###.###.###.###:24800 connected to server (output hangs here) At this point, things should work, but my mouse still can't change screens unless a window is maximized on my Ubuntu machine. Everything is running on port 24800. No firewall on Ubuntu. Firewall port 24800 open on Windows 7. This was previously working on Ubuntu 10.10 and Windows 7 (so only Ubuntu has been upgraded). I'm open to using either 32 or 64-bit on either server or client side, but I just want to get it working on Ubuntu 11.10 and Windows 7! I'm also using Ubuntu Classic (no effects), and not Unity.

  Read the article

• Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

  - by Nathan Ridley

  I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

  Read the article

• ACDSee alternatives for batch editing images

  - by Oxwivi

  I am looking for free, preferably open, alternatives to ACDSee for batch editing work. While I can do much of the work well on ACDSee, it's not entirely satisfactory despite having to pay for it. I need at least the following batch editing functions: Resize using either height or width and maintain aspect ration Auto contrast text overlays and occasionally, cropping oh, I make extensive use of renaming features as well Couple of issues with ACDSee are: I always need to highlight the Exposure section or auto contrast will not be done despite it being saved in the preset; and I can't define, move around the cropping box, forcing me to manually crop tons of images. I'm not an advanced, or "power photo-editor". I only require the basic stuff I described to be automated. My personal feature wish list (I'm pretty sure something so niche doesn't exist) would be text overlay based on the image names (images are named as image-1_1, image-1_2 or image-2_c1_1, image-2_c1_2, and text overlay would Image-1 and Image-2 C1 and Image-2 C2). I tried digiKam, but damn that thing is huge. It runs very slowly on my Pentium 4 and 1.5 GB RAM. On top of being a program with over 1 GB of files, the KDE library it uses is always slow regardless of it running on either Windows or Linux.

  Read the article

• How do I log back into a Windows Server 2003 guest OS after Hyper-V integration services installs and breaks my domain logins?

  - by Warren P

  After installing Hyper-V integration services, I appear to have a problem with logging in to my Windows Server 2003 virtual machine. Incorrect passwords and logins give the usual error message, but a correct login/password gives me this message: Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear, contact your system administrator for assistance. Nothing pleases me more than Microsoft telling me (the ersatz system administrator) to contact my system administrator for help, when I suspect that I'm hooped. The virtual machine has a valid network connection, and has decided to invalidate all my previous logins on this account, so I can't log in and remotely fix anything, and I can't remotely connect to it from outside either. This appears to be a catch 22. Unfortunately I don't know any non-domain local logins for this virtual machine, so I suspect I am basically hooped, or that I need ophcrack. is there any alternative to ophcrack? Second and related question; I used Disk2VHD to do the conversion, and I could log in fine several times, until after the Hyper-V integration services were installed, then suddenly this happens and I can't log in now - was there something I did wrong? I can't get networking working inside the VM BEFORE I install integration services, and at the very moment that integration services is being installed, I'm getting locked out like this. I probably should always know the local login of any machine I'm upgrading so I don't get stuck like this in the future.... great. Now I am reminded again of this.

  Read the article

• Partitioning & Linux

  - by Zac

  Every tutorial on Linux-based partitioning schemes (or, just partitioning in general) will tell you that a PC can have either 4 primary partitions, or 3 primaries and 1 extended. They will all also tell you that Linux (in my case, Ubuntu) can be installed on either. It's also come to my attention that it is not too atypical for FHS directories, such as usr/, tmp/, etc/, home/ or var/ to be mounted separately on other partitions. Several questions I am unable to find the answers to, purely for my own edification: (1) By "PC", are we really talking about common PC disk types, like IDE or SATA? I guess I'm wondering why PC uses are limited to 4 primaries or 3 primaries + 1 extended (2) I'm choking on some basic OS concepts: it is said that a partition can be mounted by a file system or an OS. So I assume this means I can somehow instruct Ubuntu to mount to 1 partition, and then any part of, say, ReiserFS, to be mounted to another partition? How? (3)(a) What about creating swap partitions? Is there too much of a good thing with swap partitioning? If I have 4GB RAM over 320GB disk, what should my swap partition size be, and why? (3)(b) Are swap files the only way to create swap partitions? Wouldn't a Linux partitioning utility allow me to define a partition as being for virtual memory only? (4) Why are partitions limited to being "mounted" by just OSes and file systems? Why couldn't I write a program to take up its own, say, 512 MB partition, and then have it invoked or uses by an OS installed on another partition? Thanks for shedding any light here... not critical that I know this stuff, but it's got me thinking incessantly. And when I think incessantly, I...can't......sleep....

  Read the article

• Two hosts on same subnet can't see each other

  - by Joey Hewitt

  I've got two routers with two separate public IP addresses on the same subnet, but I can't get them to talk to each other. Both are connected to the internet (ISP-provided gateway) via Ethernet ports provided by the landlord, but I don't have access to or knowledge of how those are physically connected or the protocols used to get back to the ISP. I can ping either from the outside, but they can't ping each other. Traceroutes in and out look the same, and they receive the same gateway over DHCP. I can ping other IPs on the subnet, so I assume this is not any sort of intentional isolation for security/privacy. Since I'm in a setup where my landlord provides internet and we don't have contact with the ISP, I can't really ask the ISP for help (doubt the landlord would know much either.) The situation is similar to the diagram at this question, but instead of the two servers, there's another router coming off the (presumed) switch, and I don't have access to the switch. I've tried giving them static routes to each other with the ISP internet gateway as the gateway, but that's not working. One is a Linksys WRT54GL running DD-WRT, the other is a Netgear WGR614v7, although I could get something more capable if necessary. I'd like to keep them each connected directly to the ISP on their WAN ports, but I can have an ethernet cable between them if necessary - I'm wondering if there's a way without that, and if there isn't, I'd appreciate advice on how to get that working. Sorry this is so nitpicky; there are reasons for all the constraints, but they don't apply to the real question, so I left them out. ;) Thank you!

  Read the article

• How should a small company administer their web server?

  - by John Isaacks

  We currently have our website hosted by a small company that is actually a reseller for Rackspace. They act as our server administrators. They configured the servers, handle the backups, if there is a problem, we call them and they fix it. We are growing and want to move away from our shared server to either a cloud or dedicated server. I am thinking cloud myself but I am open to either. The current company doesn't seem to want to offer us anything more than a shared hosting plan. I looked into cloud solutions at vps.net, with them I would have to be the server administrator myself. I am the website programmer but administering the server is outside my comfort zone. vps.net does have a $99/month plan for Pro-Active Managed Support but I am not sure if this is the equivalent on a server admin that is there when you need them. We could hire someone in house, but I think that would be overkill for our needs. I am not exactly sure what we need, I do know we need as close to 100% uptime as we possible can. and we need the ability to add/remove/change the server configuration/software/etc. when needed (though changes shouldn't be very often once everything is setup right). Can someone point me in the right direction? What do other companies do?

  Read the article

• Linux Mint Constantly freezing on Dell XPS L502X

  - by Josh

  I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

  Read the article

• WAMP starts Apache or Mysql, but not both?

  - by ladenedge

  When I install WAMP, the Apache and Mysql services are set to run as the LocalService user and all works well. However, because I need to access remote UNC paths in my PHP code, I need to run at least Apache as a user that exists on both the local host and the remote host - I'll call him WampUser. When both Apache and Mysql are set to start as WampUser, I cannot start both at the same time. If both are stopped, I can start either successfully. When I attempt to start the other, I get Error 1053: The service did not respond to the start or control request in a timely fashion. This error appears immediately - there is no timeout. When at least one of the services is set to start as LocalService, both start fine. I can, therefore, solve my problem by setting Apache to WampUser and Mysql to LocalService, but I'm more interested in why this is happening in the first place. I'm especially curious because this situation does not occur on other servers - something I've done to this server has made these two services exclusive when running as the same user. Here are some miscellaneous data points: I am using Windows Server 2003. I've provided recursive Full Control to the C:\wamp directory for WampUser. Nothing appears in the event log after the service fails. No log entries appear in either the Mysql log or the Apache error log. Neither application appears in the process list when the appropriate service is stopped. Any ideas?

  Read the article

• How to track which process is failing logons?

  - by Massimo

  Windows Server 2003, VMWare VirtualCenter 2.5. Something is continuously trying to log on to VirtualCenter using a disabled domain account; the failed logon attempts are logged by VirtualCenter in its own logs and by Windows in the Security event log. This happens roughly every minute or two. The source of the logon attempts is 127.0.0.1, so it must be some process running on the server itself. There are no services running as this user account and no scheduled jobs on the system. The task manager doesn't show any proces running under this account, either. The user account's name is nowhere to be found in the Registry. But some process is trying to use it, and failing. It probably is not some critical process, as everything looks fine; it could be something that was installed long ago and forgotten there. Whatever it is, it probably is running under another user account (possibly a system one), but is trying to log on to VC using those credentials, which are probably saved in some configuration file, since they're not stored in the Registry. How can I track which process is trying (and failing) those logon attempts, either using Windows or VirtualCenter?

  Read the article

• USB Harddisk not working on dual boot windows7/8

  - by Jesper

  Yesterday I installed Windows 8 on a machine that already had Windows 7. They are on dual boot and both systems work fine. The problem is that inserting a USB hard disk in either system does nothing. If I connect a USB mouse or mobile phone, they work fine, so the USB plugs are active/working and the USB hard drives that I am trying to connect work on my other laptop just fine. I have tried to uninstall all USB-related items in Device Manager and let them reinstall upon restart, but that didn't help. The USB drive does not show up in disk management either. The strange thing is that it is exactly the same situation on both windows. USB mice etc. work just fine and USB hard drives do not. Any ideas on solving this problem would be great. ...Don't know if it is important, but this is a Toshiba Tecra R950 Laptop. EDIT: I have found out that my other USB HD (Western Digital) works on this laptop, but for my StoreJet Transcend and Adata "something" does not work. All three work on another Windows 7 laptop. Sizewise the WD is in the middle at 400 GB. The StoreJet is 640 GB and the Adata is 200 GB.

  Read the article

• Internet Troubles - PPPoE vs PPPoA?

  - by AkkA

  I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

  Read the article

• How can I restore my laptop from Windows 7 to its original Windows Vista recovery partition?

  - by Cam Jackson

  I bought my Acer laptop 4 years ago with Vista Home Premium x86. It has a recovery partition that I have used successfully in the past to format everything and reinstall Windows to factory settings. I have since upgraded to Windows 7, but I now need to get back to my original installation. Not sure what it's called, but I can successfully get into this recovery thingy: However, when I click the third option (for me I think it says 'Windows Image Recovery' or something like that) it tells me that it can't find any images to recover from :( I have checked and I don't have a windows.old that I can recover from either. One final note, if I launch diskmgmt.msc, these are the partitions: Why is the first partition shaded? Does that mean anything? Both of the 'unlettered' partitions are 100% empty. Did the Windows 7 upgrade process format my Vista system recovery partition?! And finally: How can I get back to my factory settings? EDIT: I did see this question, but neither of the answers apply to my situation. Edit to address jdh's answer: From what I can tell, I never get the option to boot the Vista recovery partition. After hitting F10, I get this screen, except it's partition 2, and I don't have the IN/MINT bit: I hit Escape, and then I get this screen, except without Ubuntu listed, and without the auto-countdown thing: I hit F8, and then I get this screen: I hit Enter on the first option, I end up at the screen in the first screen shot. As I said, from there I click the third option, and it fails to find the image, which I guess makes sense if it's only looking for a Windows 7 recovery. So I either need to make the Windows 7 tool see the Vista recovery partition, or I need the boot loader (?) to let me select Vista earlier in the process. Any ideas?

  Read the article

• Issue with kernel boot [OVH SERVER]

  - by Conner Stephen McCabe

  Trying to install OpenVZ kernel on Centos 6.3, Yes my kernel is installed i can see it in the /boot folder, yes it is Rhel6 and yes it is all up to date, i checked this with yum update. My issue comes when i reboot my server with that kernel set as the default, it doesn't load, below i shall put a copy of my grub.conf file and my menu.lst file. Grub.conf: default=0 timeout=5 title vzkernel (2.6.32-042stab057.1) root (hd0,0) kernel /boot/vmlinuz-2.6.32-042stab057.1 ro root=/dev/sda1 initrd /initramfs-2.6.32-042stab057.1.img title linux centos6_64 kernel /boot/bzImage-3.2.13-xxxx-grs-ipv6-64 root=/dev/sda1 ro root (hd0,0) Now i shall paste in Menu.lst; # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/vg_stock-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title Linux OpenVZ (vmlinuz-2.6.32-042stab057.1) root (hd0,0) kernel /boot/vmlinuz-2.6.32-042stab057.1 ro root=/dev/mapper/vg_stock-lv_root rd_LVM_LV=vg_stock/lv_root rd_LVM_LV=vg_stock/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=l$ initrd /initramfs-2.6.32-042stab057.1.img title CentOS (2.6.32-71.el6.x86_64) root (hd0,0) kernel /boot/bzImage-3.2.13-xxxx-grs-ipv6-64 ro root=/dev/mapper/vg_stock-lv_root rd_LVM_LV=vg_stock/lv_root rd_LVM_LV=vg_stock/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFO$ initrd /initramfs-2.6.32-71.el6.x86_64.img # dummy text Somebody mentioned something about OVH having added a script which changes the kernel settings or something, and suggested that we either remove the script or reinstall using a VNC, but we don't know how to go about doing either of these? Really would be great if you guys could help. Thanks in advance.

  Read the article

• Patch management on multiple systems

  - by Pierre

  I'm in charge of auditing the security configuration of an important farm of Unix servers. So far, I came up with a way to assess the basic configuration but not the installed updates. The very problem here is that I just can't trust the package management tools on those machine. Indeed some of them did not sync with the repository for a long time (So I can't do a "yum check-updates" on Redhat for example). Some of those servers are not even connected to the internet and use an company repository. Another problem is that I have multiple target systems: AIX, Debian, Centos/Redhat, etc... So the version could be different (AIX) and the tools available will be different. And, last but not least, I can't install anything on the target system. So I need to use a script to retrieve the information and either: process it directly or save the information to be able to process it later on a server (Which may happen to run a different distribution than the one on which the information have been retrieved). The best ideas I could come up with were: either retrieve the list of installed packages on the machine (dpkg -l for example on debian) and process it on a dedicated server (Directly parsing the "Packages" file of debian repositories). Still, the problem remains the same for AIX and Redhat... or use Nessus' scripts to assess vulnerability on the installed packages, but I find this a bit dirty. Does anyone know any better/efficient way of doing this ? P.S: I already took time to review some answers to similar problems. Unfortunately Chef, puppet, ... don't meet the requirements I have to meet. Edit: Long story short. I need to have the list of missing updates on a Unix system just like MBSA on Windows. I'm not authorized to install anything on this system as it's not mine. All I have are scripts languages. Thanks.

  Read the article

• Mac, VNC and multiple monitors

  - by MarqueIV

  I asked a similar question here before but apparently I wasn't as clear as I had expected by the responses. That said, I'll try again. I have a Mac Pro with quad monitors which I would like to access remotely. I've been using VNC for this (either via screen sharing or a dedicated VNC client), which works, but the VNC protocol matches the physical layout/resolutions of attached monitors. One of the things I like about Microsoft's Remote Desktop (Terminal Server) client is that when you connect, it blanks out the local screens and sets the resolution to a client-specified setting. In other words, when natively running Windows, even though I'm running a physical 30" monitor flanked by 2 24" monitors as well as a 21" Cintiq monitor, I can set the Remote Desktop resolution to match my notebook's screen giving me a native, single-monitor configuration. As soon as I disconnect (and you log back in locally), the desktop un-blanks and the resolution resets back to the four physically attached monitors. Again, VNC works and yes I know I can use 5901, 5902...n to attach VNC to a specific monitor as opposed to the entire desktop, but I'm still at the mercy of trying to look at a 2560x1600 resolution on a 1280x800 screen. I'm left with either scaling (everything's too small) or panning/scrolling (it's like playing hide-and-seek with your documents!) SO... anyone know of any Mac-based remote software (client and server) that will let me connect to my Mac Pro and reset the resolution by the client, just like you can in Windows, or am I SOL?

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >