Search Results

Search found 34016 results on 1361 pages for 'filesystem access'.

Page 49/1361 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • internet access options in remote area? (read: no comcast,qwest, etc)

    - by freedrull
    Currently I am living in a fairly "remote" area, in the countryside, and cable internet access through the typical companies like comcast and qwest is just not available here. I've been trying to research other options for fast internet access. There are some small cable companies but they currently do not offer broadband access here. I thought about maybe buying a 3g phone with a data plan and doing some sort of tethering, or perhaps getting an android phone and using it as a wireless AP. This would of course depend on 3g being available here. The only other thing I can think of is some sort of satellite internet service, or doing something crazy like adapting wifi over am radio. Anyone have any ideas, at all, short of moving somewhere else?

    Read the article

  • What's the difference between a wifi access point and station?

    - by Earlz
    I noticed that my (rooted) modem has some hidden modes for wifi. It has the default(and only setting without rooting) wireless access point, but it also has the settings repeater, ad-hoc, and station. What I'm really curious about is this station mode and how it differs from access point. I did a cursory search and didn't come up with any significant differences, other than that they are two distinct modes on many wireless chipsets. What is this station mode and how does it differ from access point?

    Read the article

  • Kernel panic error

    - by cioby23
    We have a dedicated server with software RAID1 and one of the disk failed recently. The disk was replaced but after rebuilding the array and rebooting the server freezes with a Kernel Panic message No filesystem could mount root, tried: reiserfs ext3 ext2 cramfs msdos vfat iso9660 romfs fuseblk xfs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(9,1) The filesystem on both disks is ext4. It seems the kernel can't load ext4 support. Is there any way to add ext4 support or do I need to recompile a new kernel again ? Interesting point that before disk replacement all was fine. The kernel is a stock kernel bzImage-2.6.34.6-xxxx-grs-ipv6-64 from our provider OVH Kind regards,

    Read the article

  • How to find ip address of my Asus RT-AC86U in Access Point mode?

    - by WilliamKF
    I'm using an Asus wireless router model RT-AC68U and can connect fine to the internet using it wirelessly. I configured the router to be an Access Point, but having done so, I can no longer locate the GUI to adjust the router as I have no idea what its IP Address is anymore. The router is plugged into a cable modem and router which is a model SMCD3G is a business class gateway labeled Comcast Business IP Gateway. This gateway is assigning ip addresses in the range 10.1.10.XX and I went to the web interface at 10.1.10.1 and listed the connected devices and see my laptop which is connected to the Asus access point along with a few other devices, but none of the devices listed are the Asus router (I tried all the six ip addresses listed). How can I determine the IP Address of my Asus router in access point mode so I can see the GUI interface again to control the router other than by doing a factory reset?

    Read the article

  • Why does this work: Windows same local admin username and password, able to access other computer?

    - by Ankush
    I've two machines MachineA and MachineB. Both have two local accounts which have same username . Both accounts are local admin on those machines. If they have same password, I'm able to access \\MachineA\C$ from MachineB. But if I change any one password above doesn't work. And it prompts for username and password. Now if I provide MachineA\username and password, it then connects. Why isn't there a prompt for password when passwords are same? I expected passwords to be hashed with random salt, how does windows know passwords are same and authorize access? These machines are running Windows Server 2008 R2. PS. I've created following reg key to enable drive access HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\LocalAccountTokenFilterPolicy to 1

    Read the article

  • Ldap access lists users even if user has no rights...

    - by Patkos Csaba
    I am trying to set up a more complex Active Directory structure for some testing purposes. What I did so far: set up 2 windows (one 2008 and one 2003) to control the same domain set up an Organizational Unit (ou): Developers set up 2 child OUs: "one" and "two" each OU has it's admin: adminOne and adminTwo I denied all access to OU "two" by removing on the Security tab all the groups I don't want to access it. now, when I log in as adminOne and I try to click on OU "two" it says I don't have permissions to see the users and properties of "two" - this is perfect, it's what I want Here comes my problem: I do a LDAP query with the adminOne user on the "Developers" What I expect to happen: I expect to retrieve the users from Developer - One I expect to NOT be able to retrieve the users from Developers - Two What actually happens: ldap shows all the users, both from Developers - One and Developers - Two, even if the user should not have permissions to Developers - Two And now my question: is there any specific settings on Windows 2003 or 2008 Active Directory servers which allow or deny access over LDAP? I could not find any.

    Read the article

  • When a new user is created on Centos 6, it takes a while (30 mins) before he can access his group folder

    - by Diepseun
    I created a new user and made it part of a certain group which has full access (777) to a folder. Checked the user in Samba, password the same as his Windows (XP) password, rebooted his desktop but he didn't have access to the folder. Checked the Samba group and config file and the user was defined as a member of the group. It didn't make sense and I then did something else for a while. When I tried again, without doing anything further about it, the user had access to the folder. I did restart the Samba server after my original changes. Thanks in advance.

    Read the article

  • How to Add the Windows Calculator to the Quick Access Toolbar in Microsoft Excel 2013

    - by Lori Kaufman
    Do you use the Windows Calculator to perform quick calculations while building spreadsheets in Excel? You can save time by adding the Calculator to the Quick Access Toolbar in Excel so you don’t have to leave the program to access the Calculator. To do this, click the down arrow on the right side of the Quick Access Toolbar and select More Commands from the drop-down menu. On the Quick Access Toolbar screen on the Excel Options dialog box, select Commands Not in the Ribbon from the Choose commands from drop-down list. Scroll down in the long list and select Calculator. Click Add to add the Calculator to the Quick Access Toolbar. Click OK to accept the change and close the Excel Options dialog box. You’ll see a Calculator icon on the Quick Access Toolbar. When you move your mouse over the icon, a hint displays saying “Custom.” Despite the label, when you click the icon, the Windows Calculator opens. The same procedure works for adding the Windows Calculator to Excel 2010, as well.     

    Read the article

  • How can I discourage the use of Access?

    - by Greg Buehler
    Lets pretend that a very large company (revenue numbers with more than 8 figures) is looking to do a refresh on a software system, particularly the dashboard used by employees. This system was originally put together in the early 1990's to handle inventory tracking and storage across a variety of facilities (10+). Since this large company is now in the process of implementing some of these inventory processes with SAP they are in need of a major refresh. The existing system: Microsoft Access project performs dashboard duties Unique shipping/receiving configurations at different facilities require unique forms and queries within the Access project Uses 3rd party libraries referenced by Access to directly interface with at control system (read: motors, conveyors, and counters) Individual SQL Server 2000 instances (some traces of pre-update SQL Server 6.0 documents) at each facility The Issue: This system started as a home brewed inventory tracking scheme with a single internal sponsor who is still in charge of the technical direction. The original sponsor prescribing the desired deliverables that are being called for in the current RFP. The RFP describes a system based around a single Access project. Any suggestion that Access is ill suited for a project of this scope are shot down under the reasoning that "it works for the scope now". Are there any case studies, notices, or statements that can be used to disuade this potential customer from repeating their mistake? Does Microsoft make any statements directly about when it is highly recommended to ditch Access?

    Read the article

  • Role based access to resources for a RESTful service

    - by mutex
    I'm still wrapping my head around REST, but I wonder if someone can help with any suggestions or approaches to role based access control for a RESTful service, particularly from the point of view of securing the data and how the URLs might look. It's probably best to consider an example: Say I have a REST service for Customers, and want to split the users of this REST service into Admin, Editor and Reader roles: Admins can change all attributes of a Customer resource Editors can change only some Readers can only view them. Access control rights are assigned to the Customers entities individually. So for example a user of the service might have admin rights to Customers 1,2 and 3 but Editor access to 4,5 and Reader access to 7,8,9. Now consider the user calling the service. What is a good way to seperate the list of Customers for the current User? GET /Customer - this might get a list of all customers that the current user has Admin\Editor\Reader access to. But then on each Customer the consumer would need an indication of what role they have. Or would it be "better" having something like GET /Customer/Admin - return all customers the current user has Admin access to. Just looking for some high level pointers or reading on a decent way to secure\filter the resources based on roles of the current user.

    Read the article

  • FileSystem.GetFiles() + UnauthorizedAccessException error?

    - by OverTheRainbow
    Hello, It seems like FileSystem.GetFiles() is unable to recover from the UnauthorizedAccessException exception that .Net triggers when trying to access an off-limit directory. In this case, does it mean this class/method isn't useful when scanning a whole drive and I should use some other solution (in which case: Which one?)? Here's some code to show the issue: Private Sub bgrLongProcess_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles bgrLongProcess.DoWork Dim drive As DriveInfo Dim filelist As Collections.ObjectModel.ReadOnlyCollection(Of String) Dim filepath As String 'Scan all fixed-drives for MyFiles.* For Each drive In DriveInfo.GetDrives() If drive.DriveType = DriveType.Fixed Then Try 'How to handle "Access to the path 'C:\System Volume Information' is denied." error? filelist = My.Computer.FileSystem.GetFiles(drive.ToString, FileIO.SearchOption.SearchAllSubDirectories, "MyFiles.*") For Each filepath In filelist DataGridView1.Rows.Add(filepath.ToString, "temp") 'Trigger ProgressChanged() event bgrLongProcess.ReportProgress(0, filepath) Next filepath Catch Ex As UnauthorizedAccessException 'How to ignore this directory and move on? End Try End If Next drive End Sub Thank you. Edit: What about using a Try/Catch just to have GetFiles() fill the array, ignore the exception and just resume? Private Sub bgrLongProcess_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles bgrLongProcess.DoWork 'Do lengthy stuff here Dim filelist As Collections.ObjectModel.ReadOnlyCollection(Of String) Dim filepath As String filelist = Nothing Try filelist = My.Computer.FileSystem.GetFiles("C:\", FileIO.SearchOption.SearchAllSubDirectories, "MyFiles.*") Catch ex As UnauthorizedAccessException 'How to just ignore this off-limit directory and resume searching? End Try 'Object reference not set to an instance of an object For Each filepath In filelist bgrLongProcess.ReportProgress(0, filepath) Next filepath End Sub

    Read the article

  • FDs not closed in FUSE filesystem

    - by cor
    Hi, I have a problem while implementing a fuse filesystem in python. for now i just have a proxy filesystem, exactly like a mount --bind would be. But, any file created, opened, or read on my filesystem is not released (the corresponding FD is not closed) Here is an example : yume% ./ProxyFs.py `pwd`/test yume% cd test yume% ls mdr yume% echo test test yume% ls mdr test yume% ps auxwww | grep python cor 22822 0.0 0.0 43596 4696 ? Ssl 12:57 0:00 python ./ProxyFs.py /home/cor/esl/proxyfs/test cor 22873 0.0 0.0 6352 812 pts/1 S+ 12:58 0:00 grep python yume% ls -l /proc/22822/fd total 0 lrwx------ 1 cor cor 64 2010-05-27 12:58 0 - /dev/null lrwx------ 1 cor cor 64 2010-05-27 12:58 1 - /dev/null lrwx------ 1 cor cor 64 2010-05-27 12:58 2 - /dev/null lrwx------ 1 cor cor 64 2010-05-27 12:58 3 - /dev/fuse l-wx------ 1 cor cor 64 2010-05-27 12:58 4 - /home/cor/test/test yume% Does anyone have a solution to actually really close the fds of the file I use in my fs ? I'm pretty sure it's a mistake in the implementation of the open, read, write hooks but i'm stucked... Let me know if you need more details ! Thanks a lot Cor

    Read the article

  • EC2 Filesystem / Files stored on the wrong partiton after launching new instance from AMI

    - by Philip Isaacs
    Today I set up a new EC2 Instance from and AMI I created from an older EC2 instance. When I launched the new instance I took the AMI that was on a small instance and launched with a medium instance. From what I can tell this is pretty standard stuff. But here's the stang part. According to AWS these are the differences Small Instance (Default) 1.7 GB of memory, 1 EC2 Compute Unit (1 virtual core with 1 EC2 Compute Unit), 160 GB of local instance storage, 32-bit or 64-bit platform Medium Instance 3.75 GB of memory, 2 EC2 Compute Units (1 virtual core with 2 EC2 Compute Units each), 410 GB of local instance storage, 32-bit or 64-bit platform Okay now here's where I'm having an issue. I when I log into the new bigger instance it still reports only having 1.7 GB of ram. The other strange part is that all my old partitions are still their in the same configurations. I see a new larger partition /mnt which is essential empty. Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.9G 5.9G 1.6G 79% / none 846M 120K 846M 1% /dev none 879M 0 879M 0% /dev/shm none 879M 76K 878M 1% /var/run none 879M 0 879M 0% /var/lock none 879M 0 879M 0% /lib/init/rw /dev/sda2 335G 195M 318G 1% /mnt /dev/sdf 16G 9.9G 5.1G 67% /var2 This EC2 is a web server and I was serving files off the /var2 directory but for some reason the instance is storing everything on / Okay here's what I'd like to do. Move all my website files to /mnt and have the web server point to that. Any suggestions? If it helps here is what my fstab looks like as well. root@myserver:/var# mount -l /dev/sda1 on / type ext3 (rw) [cloudimg-rootfs] proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda2 on /mnt type ext3 (rw) /dev/sdf on /var2 type ext4 (rw,noatime) I hope this question makes sense. Basically i want my old files on this new partition. Thanks in advance

    Read the article

  • Networked filesystem with user level security for linux

    - by Konrads
    Hi, I want to enable file sharing between servers and clients, both linux. I don't want to rely on machine trust like in NFSv4 because client users will have root privileges. What are my options besides SMB (SAMBA)? Does OpenAFS support user level authentication & access? Using mounted WebDAV/ftp/sshfs seems silly for LAN.

    Read the article

  • How to Disable Access to the Registry in Windows 7

    - by Mysticgeek
    If you don’t know what your doing in the Registry, you can mess up your computer pretty good. Today we show you how to prevent users from accessing the Registry and making any changes to it. Using Local Group Policy Editor Note: This method uses Group Policy Editor which is not available in Home versions of Windows. First type gpedit.msc into the Search box in the Start menu. When Group Policy Editor opens, navigate to User Configuration \ Administrative Templates then select System. Under Setting in the right panel double-click on Prevent access to registry editing tools. Select the radio button next to Enabled, click OK, then close out of Group Policy Editor. Now if a user tries to access the Registry… They will get the following message advising they cannot access it.   Using Registry Enabler & Disabler 3 If you’re using Home or Starter version of Windows 7, you can use a neat utility called Registry Enabler & Disabler (link below). This app works on XP and Vista as well. There is no installation involved so you can run it from a flash drive, disable the registry, then take the flash drive with you while a the user is on the machine.   Again, if the user tries to access the Registry they will get the following error… Using one of these options will stop users from gaining access to the Registry or running any registry hacks. Of course if you have a shared computer, you may want to set up other users with a Standard Account, as they won’t be able to make changes to the Registry anyway. Download Registry Enabler & Disabler 3 Similar Articles Productive Geek Tips Disable Notification Balloons in XPDisable/Enable Lock Workstation Functionality (Windows + L)Disable Windows Mobility Center in Windows 7 or VistaRegistry Hack to Disable Writing to USB DrivesSpeed Up Disk Access by Disabling Last Access Updating in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Dlink DWA-556 Access point fails to start on 2.6.35-25 while 2.6.35-24 works. How can I do this with >2.6.35-24?

    - by Azendale
    I'm using hostapd to run an access point with a Dlink DWA-556 wireless N card. However, I can no longer get it to start when I use kernels greater than 2.6.35-24. Here's a log where I ran the uname -a&&hostapd -c <configfile> on the different kernel versions. Linux erikbandersen 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Flushing old station entries Deauthenticate all stations Using interface wlan1 with hwaddr 1c:bd:b9:d5:e8:3c and ssid 'erikbandersen.com/freewifi' wlan1: Setup of interface done. MGMT (TX callback) ACK Malformed netlink message: len=436 left=256 plen=420 256 extra bytes in the end of netlink message MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb mgmt::auth authentication: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authentication OK (open system) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-AUTHENTICATE.indication(3c:4a:92:0e:41:2f, OPEN_SYSTEM) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) authentication reply: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=2 resp=0 (IE len=0) MGMT (TX callback) ACK mgmt::auth cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authenticated mgmt::assoc_req association request: STA=3c:4a:92:0e:41:2f capab_info=0x421 listen_interval=10 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 HT: STA 3c:4a:92:0e:41:2f HT Capabilities Info: 0x102c handle_assoc STA 3c:4a:92:0e:41:2f - no greenfield, num of non-gf stations 1 handle_assoc STA 3c:4a:92:0e:41:2f - 20 MHz HT, num of 20MHz HT STAs 1 hostapd_ht_operation_update current operation mode=0x0 hostapd_ht_operation_update new operation mode=0x7 changes=2 new AID 1 wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: association OK (aid 1) MGMT (TX callback) ACK mgmt::assoc_resp cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: associated (aid 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-ASSOCIATE.indication(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f RADIUS: starting accounting session 4DAC8224-00000000 MGMT (TX callback) ACK mgmt::action cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb Signal 2 received - terminating wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DEAUTHENTICATE.indication(3c:4a:92:0e:41:2f, 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) Removing station 3c:4a:92:0e:41:2f hostapd_ht_operation_update current operation mode=0x7 hostapd_ht_operation_update new operation mode=0x0 changes=2 Flushing old station entries Deauthenticate all stations . Linux erikbandersen 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=27 dBm HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Could not set channel for kernel driver wlan1: Unable to setup interface. My wireless card is listed as 02:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) by lspci. Am I doing it wrong and there's a new way of doing it? I'm holding off upgrading to Natty because of this. What changed between the versions that would cause this? Should I report it as a bug?

    Read the article

  • PHP file copy to another server; Access filesystem on other server

    - by dclowd9901
    I'm trying to write a PHP script to copy the files from your local machine to a server: $destination_directory = 'I:\path\to\file\\' . $theme_number; if(!@opendir($desination_directory)) { echo 'Sorry, the destination directory could not be found.'; die(); } I check the access to the destination folder with that process, and I keep getting the error return. Anyone know what I'm doing wrong? I pretty much have everything else in place. I just don't know how to access this other server.

    Read the article

  • How to access a file in local system using javascript?

    - by Ka-rocks
    I'm using JQuery mobile frame work. I'm having a server which host a website. The user can connect to website through mobile browser and download files(.doc, .xls, .pdf etc) from that website. I need to open the file which is saved in the user's mobile programmatically using java script. I tried to open using location.href="file://sdcard/download/test.doc". But it didn't work. It showed permission denied. Is there any way to this? Please help. Thanks in advance.

    Read the article

  • OpenWorld 2013 Presentation Links

    - by Darin Pendergraft
    We have had a lot of requests for OpenWorld 2013 presentations that were delivered by the IDM team this year in San Francisco.  To make things easier, I have uploaded all of the presentations to SlideShare.  Here is a list of available presentations: ID Title CON8808 Enabling Business Growth in the new Economy CON8810 Who Should have Access to What CON8811 Converged Identity Governance for Speeding Up Business and Reducing Cost CON8813 Securing Privileged Accounts with an integrated IDM Solution CON8817 API Management - Enable your Infrastructure for Secure Mobile and Cloud Use CON8819 Context and Risk Aware Access Control Any Device AnyWhere CON8823 Access management for the Internet of Things CON8828 Justifying and Planning a Successful Identity Management Upgrade CON8833 Access at Scale for Hundreds of Millions of Users CON8834 Bring Your Own Identity CON8836 Leveraging the Cloud to Simplify Your Identity Management Implementation CON8837 Leverage Authorization to Monetize Content and Media Subscriptions CON8896 Securely Enabling Mobile Access for Business Transformation CON8902 Developing Secure Mobile Applications CON9024 Next-Generation Optimized Directory - Oracle Unified Directory CON9573 Managing the OIM platform with Oracle Enterprise Manager

    Read the article

  • Can I use netgroup at an NIS Client (Redhat) to restrict access to it?

    - by sdmythos_gr
    Our company has a central NIS configuration that we are using to access our teams servers (Redhat)... The current configuration allows all valid NIS authenticated users to connect to our servers. We cannot update or change something on the NIS Master Server... so... Is there a way to use netgroups or some other configuration to allow our team members to authenticate using the NIS server but still restrict access to all other users? Thanks!

    Read the article

  • Which application may I use to open an old Microsoft access database?

    - by skyeagle
    I have an old Microsoft access database (circa 2002 or so), which I need to extract data from. I don't have Microsoft Office available - the trial version I downloaded expired a week ago or so. I am looking for an open source solution or something similar that will allow me to open the database and extract the data - so I can throw away the database. BTW, can I use OpenOffice to access the data in the .mdb file? (I don't think the option is available IIRC)

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >