Search Results

Search found 14041 results on 562 pages for 'home theater'.

Page 49/562 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Should I upgrade my LinkSys WRT54GL firmware?

  - by Reid

  I have a LinkSys WRT54GL v1.1 which currently has stock firmware version 4.30.7. I see that version 4.30.14 is available. The router works fine now, and the release notes look uninteresting except for one line in v4.30.9: "Resolves issue with Linux kernel vulnerability". I have remote management turned off. I'm aware of the 3rd-party firmwares but the stock firmware works fine for me at the moment, so I don't have an interest in those. Is the status quo fine or should I upgrade the firmware? (It's a bit of a pain since the config has to be saved and reloaded, and obviously any mucking with firmware is risky.)

  Read the article

• Windows 7 Homegroups not working?

  - by Jonas

  I've got a homegroup set up, and only the accounts/machines where the user and password is identical can see/share files. I thought the setting to let homegroup control the accounts would make that requirement unnecessary....am I missing something? To be clear: I can see the other machines/user accounts in my homegroup listing, but I can't see any of the files in their shared libraries.

  Read the article

• Block P2P traffic on a Linksys router WRT54G with Tomato firmware

  - by Kami

  I'm running a small wireless network (6 to 10 users) on a Linksys WRT54G with Tomato firmware sharing an Internet connection. I don't want the users to download files with BitTorrent (mainly used) and other P2P apps. I've also found some solutions about lowering P2P traffic priority using QoS. I really need to ban P2P traffic. Does anyone know how to setup some rules to deny that kind of traffic? I've tried to setup an Access Restriction Rule: However it's not working at all.

  Read the article

• Can I make my PC backup and then sleep on demand with WHS?

  - by Simon

  I really hate the way that WHS backs up at a particular time in the morning. First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag. I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete. I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop. These are the possibilities (with wake timers left as default): 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete. 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night. I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'. What I'd really like to do is : Click 'Backup and Sleep' and then go to bed. It will backup immediately and then sleep the PC. This backup must be 'automatically managed' and not appear as a 'locked backup' in my console Show me a confirmation that everything was backed up successfully (or not) when I turn it on. Is there any way to achieve this?

  Read the article

• Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

  - by Thomas

  I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

  Read the article

• Crossover LAN connection between Ubuntu And Windows 7 is not working

  - by brett

  my question is closely related to: How do I connect Ubuntu 10.04 and Windows 7 with an Ethernet cable? What I am after is: Windows 7-------wireless-----\ Wifi router Ubuntu 10.04----wireless-----/ Windows 7-------wireless-----\ | cross_over_cable Wifi router | Ubuntu 10.04----wireless-----/ What I did was On Windows edit system32\drivers\etc\hosts Add the following line: 192.168.253.2 my_ubuntu_computer_name_&-wired //?not sure if this is right On Ubuntu: sudo gedit /etc/hosts Add the following line: 192.168.253.1 my_pc_computer_name&-wired //?not sure if this is right and then Ubuntu 12.04 as the host Right click on the Network Manager applet, click Edit Connections... In the Wired tab, click Auto eth0, then click Edit... In the IPv4 Settings tab, change Method: to Shared to other computers. Click Apply and enter your password when it asks you. Close everything and reboot. Plug the Ethernet cable into both computers. But, I can connect to my windows network folders from ubuntu via wifi I can't connect to my ubuntu network folders from windows via wifi(in fact this bit was working before - so my wifi connection is worse) my ubuntu Auto Ethernet seems to be on From Ubuntu eth0 Link encap:Ethernet HWaddr 00:11:2f:f3:43:8d inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:2fff:fef3:438d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:27279 (27.2 KB) Interrupt:19 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1147 errors:0 dropped:0 overruns:0 frame:0 TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94380 (94.3 KB) TX bytes:94380 (94.3 KB) wlan0 Link encap:Ethernet HWaddr 00:03:c9:e9:6f:bf inet addr:10.1.1.7 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::203:c9ff:fee9:6fbf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13186 errors:0 dropped:0 overruns:0 frame:0 TX packets:12187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1598882 (1.5 MB) TX bytes:1189555 (1.1 MB) From Windows: Windows IP Configuration Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : BoB Link-local IPv6 Address . . . . . : fe80::ecf7:c445:3725:b9c1%12 IPv4 Address. . . . . . . . . . . : 10.1.1.4 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.1 Tunnel adapter Local Area Connection* 15: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:1423:3ae3:f5fe:fefb Link-local IPv6 Address . . . . . : fe80::1423:3ae3:f5fe:fefb%23 Default Gateway . . . . . . . . . : :: Tunnel adapter isatap.BoB: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : BoB Tunnel adapter isatap.{D0C8EBA1-335D-4620-8570-6C36E8786D72}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

  Read the article

• Diagnosing extremely slow network operations.

  - by Chris Becke

  The network: * A windows 7 PC with 2 NICs - one connected to an old style ethernet hub - the other to the internet - with internet sharing enabled * An Apple iMac connected to the hub, successfully utilizing the ICS to access the internet. My problem: Using the Mac, copying from the internet is fast. However, if I connect to a SMB: share on the Windows 7 PC and try and copy anything a few kb the copy operation is appallingly slow with my network card using the Windows 7 control panel showing ~.1% utilization. The NICs are 100Mbs and show a 10x larger throughput (now ~1%) if I download large files over the internet using the Mac. WTF?

  Read the article

• Why would my wireless cut in and out every minute or so?

  - by Strilanc

  I've been having problems with my wireless. I moved to a new apartment, and the wireless seems incredibly unreliable. Sometimes it will be stable for hours until, all of a sudden, it starts cutting in and out. I'll get 30-90 seconds of normal behavior, then 5-30 seconds of nothing, then repeat. Sometimes the connection will stop working entirely, until I power-cycle the router. It is extremely, extremely annoying. Surfing the web isn't too bad, assuming you can stand the random 5-30 second waits. But some connections are sensitive enough to timeout, and it certainly makes multiplayer games unplayable. Facts: I confirmed the problem using ping google.com -t. I get normal traffic, interspersed with bursts of "Request timed out.". I've never had this problem before with this laptop. I didn't bring my own router or modem to the apartment. I'm using what the old tenant had. Hooking directly to the modem via an ethernet cable results in a stable connection. Temporarily cutting power to the router sometimes fixes the problem. Sometimes it doesn't. I reset the router, but the problem remained. Apparently the previous tenant had issues with the internet, but I don't know what they were specifically. The router is a D-Link DIR-615, and their tech support is useless.

  Read the article

• Network trials and tribulations

  - by MauiWowie

  Hi, I am in the process of setting up a small (two PC's, both running Windows 7) network using a D-link DI-604 router (which acts only as hub, it's not set up in any way). In the Network and 'Sharing Center' in 'Control Panel' I clicked 'Set up a New (Connection or) Network'. All went well up until the moment I attempted to connect one PC with the other (in the 'Connect' dialog I entered the other PC's IP, no pwd). I can use both PC's to connect to and browse the net though, so the router/hub does not seem to be the problem. And I must have done something right, because the other computer shows up in the 'Network Map'. Any and all help is much appreciated!

  Read the article

• How to use my computer to control a lamp?

  - by nona urbiz

  I've been researching computer automation systems, but everything I've found has been overkill for what I'm interested in. Can anyone help me control a lamp that is on my desk, plugged in the wall beneath the desk, with my computer (also on the desk, usually). What got me thinking is that I have the lamp plugged into a Belkin extension cord/surge protector that came with a wireless switch that toggles the power going to 6 of the eight sockets. Can I somehow hook my computer into this? I'm not too afraid to get into some wiring type thing, but do have a somewhat limited budget. It'd also be cool to get a dimmer in the loop too. thanks aha. after more research, i have realized what i'm looking for is instructions for a DIY version of this that won't look so ugly, and that i can build a UI for rather than shortcuts.

  Read the article

• Can't ping other machines in my network

  - by judahgabriel

  I've got 3 machines on my network, all running Windows 7. None of them can ping each other, can't see each other on the network, can't see shares, can't remote desktop, can't see any homegroups. They are all on the same workgroup. They are all connected to the same wireless, WPA2 secured network. They all worked together nicely until I added a password to my wireless network. After that, and after reconnecting all the machines to the password-protected network, they can't see each other. Any ideas what could be wrong?

  Read the article

• assign auto static ip on ubuntu 10.04

  - by ronakin

  I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

  Read the article

• Streaming music throughout the house on a budget?

  - by greggannicott

  I was wondering whether anyone knew of a way to stream music throughout a house on a budget? I want to avoid spending any money on this (eg. I don't want to buy a d-link style device). It would be ideal if I could use my existing hardware and some open source software. I have three old(ish) PCs knocking around. I'm happy to stick either Windows or Linux on them. They can all be hooked up to speakers. The ideal solution would result in: the same audio being heard from every device (eg. when you hear a beat on one device, you'd hear it at the exact same time on another (so you don't get any echo)) I'd be able to control the source application (eg. the songs lined up) with my iPhone. I realise I'm being cheeky with those two wishes - but you never know your luck. Am I asking for too much, or is there a piece of software/protocol out there with this purpose in mind? I've been searching for sometime now, but haven't had any joy. Thanks in advance.

  Read the article

• Accessing Windows from Linux/Mac by name using TCP/IP

  - by stevekuo

  What are some solutions to access Windows by its computer name from Linux and Mac using TCP/IP. That is, from terminal I want to be able to ping my Windows PCs using its host name. My setup is: Various machines running Ubuntu, Windows XP and OS X. Networked using a consumer grade wireless router which provides DHCP. The only DNS is the ISP's, which resolves Internet names and not local host names. The Windows machines can ping each other by name. The Ubuntu and OS X machines can only ping Windows by IP address (name doesn't work).

  Read the article

• Is there a way to explore my WHS files via Xbox 360's Media Center app?

  - by bangoker

  I know its a "Console" question but its really more of a Media Center Extender question! I can access the data through the Video/Pictures options, but not through the Media Center App. Also I can only see the videos that are directly on the Videos folder on my WHS, but not any of the subfolders. Same thing in my Laptop, if I connect to my WHS through Media Player it will only show the videos on Videos but not any other sub-folder, but if I open Media Center I can then connect to server and see all the folders.

  Read the article

• Media center consumes all available memory when attempting to play music off of a server

  - by RCIX

  I have Windows 7 Ultimate, and recently, when i try to play a song off of my Twonky Media Server/Windows Media Connect (based on an HP WHS with an Atom), it plays choppily. When i open Resource Monitor, it shows that after ordering the music to play, memory usage rapidly spikes to consume most, if not all, of the available memory on my system (excluding a couple hundred megabytes in standby). Why does it do this and is there anything i can do to stop it? Edit: it happens when I attempt to browse the server's music, not just when i play music. Edit 2: the "ehshell" process is what consumes the memory, appears to me something specific to media center. Moreover, the ehshell process doesn't die in this case. Edit 3: It only happens when browsing my Twonky library, and not my Windows Media Connect.

  Read the article

• if an outdated, vulnerable but clean Windows machine is connected to network behind router, can it be detected and attacked?

  - by EndangeringSpecies

  suppose the machine is clean of all malware but not in any sense updated, patched, secured etc. Suppose I connect it to the internet from behind wireless router with the intent of using it only on a few trusted sites and only there. Or, for the sake of argument, maybe I wouldn't do any browsing at all, just let it sit there connected to the network. This is all happening in a residential situation with cable internet. In this situation can a remote attacker somehow detect the fact that the machine is connected to the internet and try connecting to do an exploit?

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• What's the fastest way to store/access large files?

  - by philfreo

  I do a lot of video editing on my Mac and need a way to store very large (30 GB) files, and don't have room on my HD. A USB/Firewire external hard drive would work, but it seems way too slow for consistently working with such large files. I've also considered buying another computer, with a large hard drive, and putting it on the same network with a shared folder. What's the fastest / most efficient way to do this? Please consider USB 2.0 speeds, hard drive read times, ethernet speeds, etc. Are there other options I should consider?

  Read the article

• Slowdown upon router/modem setup change

  - by Ollie Saunders

  I’ve been using a Belkin FSD7632-4 modem router to connect to my TalkTalk provided ADSL internet connection for some time and been pretty happy with it. Recently, however, the connection has been failing and I decided to get a ASUS RT-N16 instead, which is also a much more capable router generally. The ASUS RT-N16 doesn’t come with a modem built-in so I purchased as Zoom modem as well. I’ve set them both up and am using them to post this message. But I’m a bit miffed to find that I get a significantly and consistently slower downstream rate from the new configuration than with the old Belkin. Belkin modem router: downstream: 3.45 mbps upstream: 0.73 mbps ASUS router + Zoom modem: downstream: 2.71 mbps upstream: 0.66 mbps Any ideas why this is? The really weird thing about this is that the Zoom supports ADSL2 and ADSL2+ but I don’t think the old Belkin does. At first I thought it might be due to the Zoom modem being limited to PPPoE instead of PPPoA, which my ISP supports, but then I tried using PPPoE with the Belkin and that still gave a high speed. I’m using VC-Mux encapsulation with both. VPI of 0 and VCI of 38. I pulled this data off the Zoom: Mode: ADSL2 Line Coding: Trellis On Status: No Defect Link Power State: L0 Downstream Upstream SNR Margin (dB): 12.3 11.8 Attenuation (dB): 43.0 24.9 Output Power (dBm): 12.9 0.0 Attainable Rate (Kbps): 3936 844 Rate (Kbps): 3194 840 MSGc (number of bytes in overhead channel message): 59 10 B (number of bytes in Mux Data Frame): 99 14 M (number of Mux Data Frames in FEC Data Frame): 2 16 T (Mux Data Frames over sync bytes): 1 8 R (number of check bytes in FEC Data Frame): 8 8 S (ratio of FEC over PMD Data Frame length): 1.9833 9.0594 L (number of bits in PMD Data Frame): 839 219 D (interleaver depth): 32 2 Delay (msec): 15 4 Super Frames: 15808 14078 Super Frame Errors: 0 4294967232 RS Words: 513778 111753 RS Correctable Errors: 126 4294967238 RS Uncorrectable Errors: 0 N/A HEC Errors: 0 4294967279 OCD Errors: 0 0 LCD Errors: 0 0 Total Cells: 1920175 237597 Data Cells: 205993 392 Bit Errors: 0 0 Total ES: 0 0 Total SES: 0 0 Total UAS: 34 0

  Read the article

• What is the best solution for letting both Macs and PCs access digital images and videos on a networ

  - by Gertbert

  I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• Qnap won't connect to Windows Share

  - by thetrashcan

  I have a qnap nmp-1000 in my network and would like to stream my films from my win7 laptop to the nmap-1000 device. I just managed to do so with upnp sharing, but I would like to, for security reasons, share my files over a shared folder which is password protected. My problem is when I'm searching for devices on my network with the qnap then it won't find any. When I try to mount a remote disk on my qnap it will just fail with an connection failed message. But when I try to connect to the qnap device with my laptop, it does this succesfully. Can someone guide me through on how to get my setup working?

  Read the article

• How to use 2 or more internet connections on the same network?

  - by Rogue

  Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

  Read the article

• Reducing CPU load to absolute minimum [on hold]

  - by user191338

  I have had a couple of things gone missing I believe stolen in my shared apartment and want to run my laptop constantly with a webcam attached, running webcam surveillance software to record/ take pictures when motion is sensed. Id like to take whatever steps are necessary to be able to run the laptop constantly without the fan coming on, as its quite loud and even though it will be hidden it can be heard. Thus Id like to know what steps I can take to reduce CPU to the bare minimum for the laptop to boot up and run the camera software and send images via ftp / email when necessary. I have windows 7 installed, though I can reinstall it clean. Which are the windows services can I turn off, and more extreme disabling or measures of whatever kind which I can take. The OS would need to run the camera, wifi / networking. Thanks very much for any help.

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >