Search Results

Search found 11543 results on 462 pages for 'kernel module'.

Page 49/462 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Google Earth freezes during zoom-in on Intel processors with integrated graphics

  - by zigma80

  When I zoom in at a certain zoom level, Google Earth makes my system freeze completely so that I have to power off or reboot I use Kubuntu 12.04 and my laptop has an Intel(R)Core(TM)i3-2310M CPU @2.10GHz with HD3000 graphics. I installed intel-gpu-tools and tried to fix it with sudo intel_reg_write 0x2120 0x1206800 as explained [here][1], but that didn't work. I wonder if there any other solution out there...

  Read the article

• How do you fix "failed command: IDENTIFY DEVICE" showing up in dmesg?

  - by Neil

  I just got a new Mushkin 60gb SSD, and it's now my primary drive in the ata1 spot. I've been getting these failed command: IDENTIFY DEVICE errors which are preventing rebooting and shutdown. Does anyone know what these could be caused by, or how to start troubleshooting? I've tried these kernels: 2.6.32-22-generic 2.6.31-17-generic And they both have the same error. Here is a link to my entire dmesg. And the relevant ata1.00 parts below: [ 59.804237] ata1: drained 256 bytes to clear DRQ. [ 59.804244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 59.804249] ata1.00: failed command: IDENTIFY DEVICE [ 59.804254] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in [ 59.804256] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 59.804258] ata1.00: status: { DRDY } [ 59.804264] ata1: hard resetting link [ 59.804266] ata1: nv: skipping hardreset on occupied port [ 60.272036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.352193] ata1.00: configured for UDMA/133 [ 60.352204] ata1: EH complete

  Read the article

• Which logs will tell me about the Touchpad and Keyboard locking up?

  - by Sepero

  I have an Asus N53SM laptop that I leave running for several weeks at a time. I never put it in hibernate or suspend, I only close the lid when I'm not using it. After a few days or weeks of running, the touchpad and keyboard will Both lock up (at the same time) for no apparent reason. I could be just surfing the internet when it happens. The touchpad and keyboard seem to only lock up when I'm actively using the laptop (not when idle), which may mean it's related to something I press, but I'm not sure? The touchpad never locks or unlocks when Pressing FN and the designated touchpad lock key (it does not seem to work on Linux). While the touchpad and keyboard are locked, I am able to plug in my USB mouse and successfully use it to control the screen cursor. I can also remotely get into the system with vnc and ssh, everything seems to run fine there as well. No processes appear out of control. It's just the laptops physical touchpad and keyboard that are locking up. How might I go about diagnosing this problem? What system logs to look at? (anything specific to look for in them?) Perhaps I should try reloading some modules? Any thing else I should inspect?

  Read the article

• SQL SERVER – DMV sys.dm_exec_describe_first_result_set_for_object – Describes the First Result Metadata for the Module

  - by pinaldave

  Here is another interesting follow up blog post of SQL SERVER – sp_describe_first_result_set New System Stored Procedure in SQL Server 2012. While I was writing earlier blog post I had come across DMV sys.dm_exec_describe_first_result_set_for_object as well. I found that SQL Server 2012 is providing all this quick and new features which quite often we miss  to learn it and when in future someone demonstrates the same to us, we express our surprise on the subject. DMV sys.dm_exec_describe_first_result_set_for_object returns result set which describes the columns used in the stored procedure. Here is the quick example. Let us first create stored procedure. USE [AdventureWorks] GO ALTER PROCEDURE [dbo].[CompSP] AS SELECT [DepartmentID] id ,[Name] n ,[GroupName] gn FROM [HumanResources].[Department] GO Now let us run following two DMV which gives us meta data description of the stored procedure passed as a parameter. Option1: Pass second parameter @include_browse_information as a 0. SELECT * FROM sys.dm_exec_describe_first_result_set_for_object ( OBJECT_ID('[dbo].[CompSP]'),0) AS Table1 GO Option2: Pass second parameter @include_browse_information as a 1. SELECT * FROM sys.dm_exec_describe_first_result_set_for_object ( OBJECT_ID('[dbo].[CompSP]'),1) AS Table1 GO Here is the result of Option1 and Option2. If you see the result, there is absolutely no difference between the results. Both of the resultset are returning column names which are aliased in the stored procedure. Let us scroll on the right side and you will notice that there is clear difference in some columns. You will see in second resultset source_database, Source_schema as well few other columns are reporting original table instead of NULL values. When @include_browse_information result is set to 1 it will provide the columns details of the underlying table. I have just discovered this DMV, I have yet to use it in production code and find out where exactly I will use this DMV. Do you have any idea? Does any thing comes up to your mind where this DMV can be helpful. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL DMV, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Perl module error on solaris-10

  - by ramesh.mimit

  I have installed perl and pm_dbdmysql perl module on solaris-10. I have a perl script which makes the mysql DB connection to a diff server and runs some queries and returns the results. Its working fine on linux(redhat) but when I am running the script on solaris-10 its giving me the below error: 2010-12-14 00:00:00 and 2010-12-14 23:59:59DAILY INSIDE : 2010-12-14 00:00:00 -- 2010-12-14 23:59:59 install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /usr/local/lib/perl5/5.10.1/i86pc-solaris /usr/local/lib/perl5/5.10.1 /usr/local/lib/perl5/site_perl/5.10.1/i86pc-solaris /usr/local/lib/perl5/site_perl/5.10.1 .) at (eval 15) line 3. Perhaps the DBD::mysql perl module hasn't been fully installed, or perhaps the capitalisation of 'mysql' isn't right. Available drivers: DBM, ExampleP, File, Gofer, Multiplex, Proxy, Sponge, Sybase. at cerberus_report.pl line 114 Though dbd-mysql perl module is already installed. PKGINST: CSWpmdbdmysql NAME: pm_dbdmysql - MySQL driver for the Perl5 Database Interface (DBI) Is it something related to the path variables to need some other perl moudule dependency!

  Read the article

• Unable to boot Ubuntu 13.10 (nVidia GTX 770m and Intel HD 4600)

  - by Raziel Gonzalez

  Ever since I bought this laptop I've been trying to install Ubuntu on it. It came with W8 preinstalled. Up to this point, I've been able to boot in UEFI mode with a black screen. I can tell it's trying to use the nVidia card (there's a led on the computer, depending on the color you can tell which GPU is using) and if I press crtl+alt+F1 I can go to console mode. Taking this advantage I tried to install bumblebee and after a successful install the led that indicates which GPU is being used change, indicating that it switched to the Intel HD 4600 graphics. After the installation I tried to initiate the graphic interface (startx) with no success. Xorg.0.log shows the error: [ 3706.779] X.Org X Server 1.14.3 Release Date: 2013-09-12 [ 3706.782] X Protocol Version 11, Revision 0 [ 3706.783] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 3706.783] Current Operating System: Linux ubuntu 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 [ 3706.783] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper nomodeset -- [ 3706.785] Build Date: 15 October 2013 09:23:37AM [ 3706.786] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 3706.786] Current version of pixman: 0.30.2 [ 3706.788] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3706.788] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3706.791] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 2 12:28:52 2013 [ 3706.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3706.792] (==) No Layout section. Using the first Screen section. [ 3706.792] (==) No screen section available. Using defaults. [ 3706.792] (**) |-->Screen "Default Screen Section" (0) [ 3706.792] (**) | |-->Monitor "<default monitor>" [ 3706.792] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3706.792] (==) Automatically adding devices [ 3706.792] (==) Automatically enabling devices [ 3706.792] (==) Automatically adding GPU devices [ 3706.792] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 3706.792] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 3706.792] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3706.792] (II) Loader magic: 0x7ff680918d20 [ 3706.792] (II) Module ABI versions: [ 3706.792] X.Org ANSI C Emulation: 0.4 [ 3706.792] X.Org Video Driver: 14.1 [ 3706.792] X.Org XInput driver : 19.1 [ 3706.792] X.Org Server Extension : 7.0 [ 3706.793] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e8 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64 [ 3706.793] (II) Open ACPI successful (/var/run/acpid.socket) [ 3706.794] Initializing built-in extension Generic Event Extension [ 3706.795] Initializing built-in extension SHAPE [ 3706.796] Initializing built-in extension MIT-SHM [ 3706.797] Initializing built-in extension XInputExtension [ 3706.797] Initializing built-in extension XTEST [ 3706.798] Initializing built-in extension BIG-REQUESTS [ 3706.799] Initializing built-in extension SYNC [ 3706.799] Initializing built-in extension XKEYBOARD [ 3706.800] Initializing built-in extension XC-MISC [ 3706.801] Initializing built-in extension SECURITY [ 3706.802] Initializing built-in extension XINERAMA [ 3706.802] Initializing built-in extension XFIXES [ 3706.803] Initializing built-in extension RENDER [ 3706.804] Initializing built-in extension RANDR [ 3706.804] Initializing built-in extension COMPOSITE [ 3706.805] Initializing built-in extension DAMAGE [ 3706.806] Initializing built-in extension MIT-SCREEN-SAVER [ 3706.806] Initializing built-in extension DOUBLE-BUFFER [ 3706.807] Initializing built-in extension RECORD [ 3706.807] Initializing built-in extension DPMS [ 3706.808] Initializing built-in extension X-Resource [ 3706.809] Initializing built-in extension XVideo [ 3706.809] Initializing built-in extension XVideo-MotionCompensation [ 3706.810] Initializing built-in extension SELinux [ 3706.811] Initializing built-in extension XFree86-VidModeExtension [ 3706.811] Initializing built-in extension XFree86-DGA [ 3706.812] Initializing built-in extension XFree86-DRI [ 3706.812] Initializing built-in extension DRI2 [ 3706.812] (II) "glx" will be loaded by default. [ 3706.812] (WW) "xmir" is not to be loaded by default. Skipping. [ 3706.812] (II) LoadModule: "dri2" [ 3706.812] (II) Module "dri2" already built-in [ 3706.812] (II) LoadModule: "glamoregl" [ 3706.813] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 3706.813] (II) Module glamoregl: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.2.901, module version = 0.5.1 [ 3706.813] ABI class: X.Org ANSI C Emulation, version 0.4 [ 3706.813] (II) LoadModule: "glx" [ 3706.813] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 3706.813] (II) Module glx: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.3, module version = 1.0.0 [ 3706.813] ABI class: X.Org Server Extension, version 7.0 [ 3706.813] (==) AIGLX enabled [ 3706.814] Loading extension GLX [ 3706.814] (==) Matched intel as autoconfigured driver 0 [ 3706.814] (==) Matched vesa as autoconfigured driver 1 [ 3706.814] (==) Matched modesetting as autoconfigured driver 2 [ 3706.814] (==) Matched fbdev as autoconfigured driver 3 [ 3706.814] (==) Assigned the driver to the xf86ConfigLayout [ 3706.814] (II) LoadModule: "intel" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 3706.814] (II) Module intel: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.3, module version = 2.99.904 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "vesa" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 3706.814] (II) Module vesa: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 2.3.2 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "modesetting" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 3706.814] (II) Module modesetting: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 0.8.0 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "fbdev" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 3706.815] (II) Module fbdev: vendor="X.Org Foundation" [ 3706.815] compiled for 1.14.1, module version = 0.4.3 [ 3706.815] Module class: X.Org Video Driver [ 3706.815] ABI class: X.Org Video Driver, version 14.1 [ 3706.815] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 3706.815] (II) VESA: driver for VESA chipsets: vesa [ 3706.815] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 3706.815] (II) FBDEV: driver for framebuffer: fbdev [ 3706.815] (--) using VT number 7 [ 3706.819] (WW) Falling back to old probe method for modesetting [ 3706.819] (EE) open /dev/dri/card0: No such file or directory [ 3706.819] (WW) Falling back to old probe method for fbdev [ 3706.819] (II) Loading sub module "fbdevhw" [ 3706.819] (II) LoadModule: "fbdevhw" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 3706.819] (II) Module fbdevhw: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 0.0.2 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "vbe" [ 3706.819] (II) LoadModule: "vbe" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 3706.819] (II) Module vbe: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.1.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "int10" [ 3706.819] (II) LoadModule: "int10" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libint10.so [ 3706.819] (II) Module int10: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.0.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) VESA(0): initializing int10 [ 3706.820] (EE) VESA(0): V_BIOS address 0x0 out of range [ 3706.820] (II) UnloadModule: "vesa" [ 3706.820] (II) UnloadSubModule: "int10" [ 3706.820] (II) Unloading int10 [ 3706.820] (II) UnloadSubModule: "vbe" [ 3706.820] (II) Unloading vbe [ 3706.820] (EE) Screen(s) found, but none have a usable configuration. [ 3706.820] (EE) Fatal server error: [ 3706.820] (EE) no screens found(EE) [ 3706.820] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 3706.820] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 3706.820] (EE) [ 3706.827] (EE) Server terminated with error (1). Closing log file. I also saved the dsmeg output to see if it can be of any help. In order to be able to get to this stage I had to boot with nomodeset option and removed quiet and splash. Anyone got this same error? Any guidance? I've tried other linux distros and so far the only one that is able to boot is Opensuse 12.3 without any issues (but only when I switch to legacy mode instead of UEFI).

  Read the article

• Doing "it all from scratch" is different than OS-specifics

  - by Bigyellow Bastion

  Many people tell me that in order to write my own operating system I need to understand the inner-workings of the one I'll be writing it on. That's nonsense. I mean I understand it for education purposes, such as studying the workings of a current OS to gain better knowledge of writing one myself. But the OS I'm writing it on is nothing but my scratchpad offering me software to write the code in, and software to assemble/compile my code into executable instructions. I've been told that I need to decide which OS I'm writing it on before I write it, but all I need is an assembler to produce flat binary, or a compiler to produce object code and a linker to link it into a flat binary .bin file. Why do people say it matters which OS you make an OS on, when it doesn't?

  Read the article

• ubuntu is very slow

  - by johnny smithens

  Hello all. I am new with Ubuntu, and it is very slow(even in Ubuntu 2D). The performance is degraded for almost any task. I just reinstalled with amd64, and tried updating the Nvidia drivers with Nvidia Xserver. but it made no difference. This is the output of free -m: total used free shared buffers cached Mem: 3006 1318 1688 0 61 699 -/+ buffers/cache: 556 2449 Swap: 3064 0 3064 tl;dr - total: 3006, used: 1318 When I see the virtual console with Ctrl+Alt+F2, I see constantly: Assuming Drive Cache: write through; asking for cache data failed; It is very frustrating. Thanks in advance!

  Read the article

• Fedora12 Slow USB 2.0 Write Speed, ehci_hcd module is missing

  - by MA1

  I am using Fedora 12, the problem I am facing is USB 2.0 write speed. I have a dual boot system with Windows XP and Fedora 12. USB 2.0 write speed in Windows XP is much faster then what I am getting in Fedora 12. After searching Google I came to know that ehci_hcd module is missing/not present in my system. ehci_hcd module is neither loaded nor it is present in the available list of modules. Can someone guide me how to fix this issue? Does ehci_hcd have something to do with USB 2.0 write speed? Do I have to recompile the kernel and add/enable the ehci_hcd module?

  Read the article

• SRSS Client Print Module must be downloaded every use

  - by Jmcgee73

  I am currently having an issue with SQL Server Reporting Services. Everytime a user clicks the print button for the report, the user must install the ActiveX client print module. The issue is that our clients are not admins on their computers. So therefore they can not install the module. I have gotten around this roughly by adding the SQL address to trust sites, setting "Download signed Active Controls" to enable, and then giving the users permission to write to "C:\Windows\Downloaded Program Files". However, this is fix is not easy to distrubute to our user base. I am using SQL Server 2008 SP3 CU3 running on Server 2008 R2. I believe the browser thinks the version is newer than what is on the server. I have tried downloading the print module CAB file from the SQL server and installing manually. That did not work either. Thanks!

  Read the article

• Overheating laptop

  - by Moncef ben slimane

  i've been using ubuntu for ~2 months, when i installed it on my computer (laptop) it never overheat but a day, i don't know what happened, it over heated.. (70*C @ Idle) I've tryed what ever i found on the net, and as well, i can't change the CPU freq o.O, i5 M460 @ 2.53 GHz.. i have benn trying, jupiter (no result), lm-sensors (aswell), and the cpu freq thingy for unity (cpu wont move from 2.5GHz) Any help? (i'm a C++ user and PHP coder...)

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• Write a program consisting of a main module and three other modules

  - by user106080

  The owner of a super supermarket would like to have a program that computes the monthly gross pay of their employees as well as the employees’s net pay. The input for this program is the employee id number, hourly rate of pay, and number of regular and overtime hours hours worked. Gross pay is the sum of the wages earnes from regular hours; overtime is 1.5 times the regular rate. Net pay is gross pay hours; overtime is paid at 1.5 times the regular rate. Net pay is the gross pay minus deductions. Assume that deduction are taken for tax withholding (50 percent of gross pay) and parking ($10.00 per month) you will need the following variables: EmployeeID (a string) HourRate is (a float) RegHours (a float) ; GrossPay (a float);Tax (afloat) Parking (a float) OverTimeHours (a float) NetPay (a float) GrossPay = Regularhours* HourRate+OverTimeHours*(HourRate*1.5) NetPay= GrossPay – (GrossPay*Tax) – Parking

  Read the article

• Wifi speed with driver rtl8187 drops

  - by Peter

  I am using lucid lynx with this USB adapter and drivers rtl8187. When I start a download, it starts at 1500kpbs (if i use "iwconfig wlan0 rate [more than 11MB]" it starts at a lower speed), it transfers a few kbs but then the speed starts to drop constantly and nothing is being transferred. I've also tried the driver r8187, but I have the same speed problem only that with this driver the download starts at only 10kbps, and drops from there. What can I try to identify the cause and fix this problem?

  Read the article

• 64 bit Ubuntu sees half my RAM

  - by koehn

  This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

  Read the article

• Removing perl module installed with cpanm

  - by ZeC

  I am Perl beginner. I wanted to use Log::Log4perl module as I am familiar how it works in Java. I used cpanm script to download module, but I ran it without "sudo". Then it installed this module to my dir /home/amer/perl5. Afterwards, I installed it as sudoer, but I want to remove installation in my home dir to avoid any conflicts in future. How can I do that? Here is my cmdline execution stack. Thanks and Regards!

  Read the article

• Broadcom BCM4313 working, but terribly slow

  - by Ataraxio Panzetta

  Hi all, I've installed ubuntu on a Asus 1015 netbook. Everything worked out of the box except for the Wireless adapter, which i had to install with the Additional Drivers application. It apparently installed fine and connects to our wireless network, but it only works at a "funny" speed range that goes from 367Bytes to a peak of 3Kb in its best moments. I know for sure the problem is neither the network nor the hardware. Network speeds are normal under windows on this laptop and in other computers with ubuntu aswell. lspci says the card is a BCM4313 model, but the Addittional Drivers Manager says these packecege contains Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322 based hardware seems like it installed the wrong driver... Is there anything I can do? I'm not concerned about compiling the driver or stuff like that, but I'm not sure on where to start... any help or guidance will be very, very appreciated.

  Read the article

• Ubuntu installation error on a windows machine

  - by Rahul

  Was trying to install Ubuntu from a CD on a machine which already has windows on it, choose the option of "Resize IDE1 master (hda) and use freed space" during the "Install the base system" step. After that i get the error- "Unable to install initrd-tools. An error was returned while trying to install the initrd-tools package into the target system. Check /target/var/log/bootstrap.log for details. The problem is one one hand i cannot proceed with the complete installation and on other hand if i remove the CD, am not able to boot windows as it says No bootable device. Would highly appreciate for any recommendations.

  Read the article

• How to Run files and open folders as an administrater 11.10

  - by Mattlinux1

  Solved!!! Enable open as administrator in nautilus! To get started, press Ctrl – Alt – T on your keyboard to open Terminal. When it opens, run the commands below: enter code here sudo apt-get install nautilus-gksu After installing that application run copy and paste the line below and press enter. sudo cp /usr/lib/nautilus/extensions-2.0/libnautilus-gksu.so /usr/lib/nautilus/extensions-3.0/ Finally, log out and back in then go and test it, by clicking your right mouse click on the file you want to run as Admin and your see a popup menu with the words: open as administrater. Visit: http://www.liberiangeek.net/2011/12/add-open-as-administrator-to-nautilus-context-menu-in-ubuntu-11-10-oneiric-ocelot/ for help and from here. Enjoy!

  Read the article

• Notebook overheating

  - by user71372

  I'm asking this question because I've tried many tips to solve they don't work and it sounds like a non-fixed bug ubuntu. My problem is with overheating. I've recently installed Ubuntu Precise 12.04 LTS alongside with MS Windows 7 on my notebook Samsung 530U. I'm using both via dual-boot mode. I've no heating problem with MS Win 7 and the fan speed is normal even with long run utilization. However, when booting with Ubuntu and after short time, the PC got very hot and the fan was running at max speed. I installed a tool called Jupiter, I put it in "Power Saving" mode but no result. Now, I avoid using ubuntu because I fear it'll damage my all new notebook. Please can you give me a "FINAL" fix of this problem (lot of answers exist but I don't know the more accurate and efficient one). Thank you in advance.

  Read the article

• which kernels can I safely purge?

  - by ecoologic

  I use the main answer of this question quite often to clear some space, but now I'm in extreme need and I'd like to better understand which kernels are safe to purge, my list is the following 10:50:58-673 - ~> dpkg -l | grep -Eo "^.i +linux-(image|headers)[^ ]+" | cut -c 5- | grep --color -E "$|"`uname -r` linux-headers-2.6.38-15 linux-headers-2.6.38-15-generic linux-headers-2.6.38-15-generic-pae linux-headers-2.6.38-16 linux-headers-2.6.38-16-generic linux-headers-2.6.38-16-generic-pae # current one linux-headers-generic linux-headers-generic-pae linux-headers-server linux-image-2.6.38-15-generic-pae linux-image-2.6.38-16-generic-pae linux-image-generic-pae linux-image-server Is it enough to keep linux-headers-2.6.38-15 linux-headers-2.6.38-15-generic linux-headers-2.6.38-15-generic-pae linux-headers-2.6.38-16 linux-headers-2.6.38-16-generic linux-headers-2.6.38-16-generic-pae # current one Or would this be enough linux-headers-2.6.38-15-generic-pae linux-headers-2.6.38-16-generic-pae # current one Or which other would be the shortest (keeping the previous one too)? And why?

  Read the article

• atftp pcre pattern

  - by CE-SA

  I've a question about the package named 'atftp'. I've got the atftp daemon finally working. Previously I was using tftp-hpa with a custom rule that replaces filenames with capitals into non-capital filenames and replaces the backslashes into forward slashes so that WinPE will boot fine. But in atftp I can't find rules or replacements like that. I'm searching for long, but cannot find or write the right pcre-pattern. Could you help me with this?

  Read the article

• How do I install 10.04 on a Vortex86DX embdedded system?

  - by mathematician1975

  I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

  Read the article

• How USB drives goes after system hard drives

  - by raihanchy

  I am using Ubuntu 12.04 LTS. My hard drives usually comes as: sda, with 'sudo blkid' and if I plug-in any USB drive, they comes as: sdb, sdc etc; after sda. That's fine!!! But problem arises after I restart my laptop with connecting those USB drives. They alter and comes first and hard drive goes to the end, like: 'sudo blkid' shows, sda, sdb for USB drives and sdc for hard drives. It's making problem to mount with /etc/fstab. I couldn't find any solutions for this. I would like to have any USB drives after my system hard drives, as in Windows. Please, help me at this point. Thanking you. Raihan

  Read the article

• What does the crash mean? And why is my Ubuntu Blackbox is crashing how can i check deeply?

  - by YumYumYum

  My system was running for a while amount of 6 hour. Two times i loss remote access and it was not functioning anymore IP is gone etc etc. 3 time showing crash but i have no idea what and why. How to know what went wrong? $ last sun pts/0 d51a429c9.access Mon Mar 19 13:44 still logged in sun tty7 :0 Mon Mar 19 12:17 still logged in reboot system boot 2.6.38-8-generic Mon Mar 19 12:17 - 13:49 (01:31) sun pts/0 d51a429c9.access Mon Mar 19 10:05 - crash (02:12) sun tty7 :0 Mon Mar 19 10:00 - crash (02:16) reboot system boot 2.6.38-8-generic Mon Mar 19 10:00 - 13:49 (03:48) sun pts/0 d51a429c9.access Mon Mar 19 09:24 - down (00:35) sun tty7 :0 Mon Mar 19 09:20 - down (00:39) reboot system boot 2.6.38-8-generic Mon Mar 19 09:20 - 10:00 (00:39) sun pts/2 d51a429c9.access Sun Mar 18 18:04 - down (01:14) sun pts/1 d51a429c9.access Sun Mar 18 17:43 - down (01:35) sun pts/0 d51a429c9.access Sun Mar 18 15:07 - 18:47 (03:40) sun pts/1 d51a429c9.access Sun Mar 18 12:58 - 17:42 (04:43) sun pts/0 d51a429c9.access Sun Mar 18 10:21 - 15:06 (04:44) sun tty7 :0 Sun Mar 18 08:56 - down (10:22) reboot system boot 2.6.38-8-generic Sun Mar 18 08:56 - 19:19 (10:22) sun tty7 :0 Sat Mar 17 18:03 - down (14:51) reboot system boot 2.6.38-8-generic Sat Mar 17 18:03 - 08:55 (14:51) sun tty7 :0 Sat Mar 17 15:00 - down (01:38) reboot system boot 2.6.38-8-generic Sat Mar 17 15:00 - 16:39 (01:38) sun pts/0 d51a4297d.access Sat Mar 17 10:45 - 14:32 (03:46) sun tty7 :0 Fri Mar 16 18:46 - crash (20:14) reboot system boot 2.6.38-8-generic Fri Mar 16 18:46 - 16:39 (21:53) $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +27.8°C (crit = +100.0°C) temp2: +29.8°C (crit = +100.0°C)

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >