Search Results

Search found 2327 results on 94 pages for 'noise generator'.

Page 49/94 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Any good reason open files in text mode?

  - by Tinctorius

  (Almost-)POSIX-compliant operating systems and Windows are known to distinguish between 'binary mode' and 'text mode' file I/O. While the former mode doesn't transform any data between the actual file or stream and the application, the latter 'translates' the contents to some standard format in a platform-specific manner: line endings are transparently translated to '\n' in C, and some platforms (CP/M, DOS and Windows) cut off a file when a byte with value 0x1A is found. These transformations seem a little useless to me. People share files between computers with different operating systems. Text mode would cause some data to be handled differently across some platforms, so when this matters, one would probably use binary mode instead. As an example: while Windows uses the sequence CR LF to end a line in text mode, UNIX text mode will not treat CR as part of the line ending sequence. Applications would have to filter that noise themselves. Older Mac versions only use CR in text mode as line endings, so neither UNIX nor Windows would understand its files. If this matters, a portable application would probably implement the parsing by itself instead of using text mode. Implementing newline interpretation in the parser might also remove some overhead of using text mode, as buffers would need to be rewritten (and possibly resized) before returning to the application, while this may be less efficient than when it would happen in the application instead. So, my question is: is there any good reason to still rely on the host OS to translate line endings and file truncation?

  Read the article

• Best FFDShow settings for upscaling SD content to 1080p HD?

  - by Richard

  Hi there, I'm running Windows Media Center 7 with ffdshow-tryouts for the decoding of many of the popular video formats. It works great. I've now upgraded my television from SD to 1080p HD and, naturally, I've still got a large number of existing MP4/XviD/DivX items of content which is in SD. I'd like, therefore, to modify the settings of ffdshow so that they are upscaled to 1080p as best as possible. I appreciate that they won't be as good as their HD equivalent - but on the flip side, I'm pretty certain I can do more than just resizing the picture to get the best possible output. Can anyone recommend the best settings in ffdshow to do this? For example, should I apply a sharpen mask? Or Noise Reduction? Or Deinterlace? Alternatively, would it be better to keep them at their current resolution and let the TV (Samsung Series 5 LE32C580) do the upscaling? Thanks.

  Read the article

• Ubuntu Server 10.10 vs. Fedora Server 14 for Mono.NET app hosting in VM

  - by Abbas

  Ubuntu Server 10.10 vs. Fedora Server 14 I want to create a web-server running Mono, MySQL 5.5 and OpenLDAP running as a VM (on VMWare Workstation). Searching “Ubuntu Server vs. Fedora Server” mostly yields flame wars and noise. There are a few good articles available but they are either out-of-date or don’t offer very convincing arguments. I know the answer is most likely to be “it depends” but I wanted to harness the collective wisdom on ServerFault and get opinions, experiences and factual information to the extent possible. My selection criteria would be (other than what is mentioned above): Ease of use Ease of development Reliability Security

  Read the article

• how to make a continuous machine gun sound-effect

  - by Jan

  I am trying to make an entity fire one or more machine-guns. For each gun I store the time between shots (1.0 / firing rate) and the time since the last shot. Also I've loaded ~10 different gun-shot sound-effects. Now, for each gun I do the following: function update(deltatime): timeSinceLastShot += deltatime if timeSinceLastShot >= timeBetweenShots + verySmallRandomValue(): timeSinceLastShot -= timeBetweenShots if gunIsFiring: displayMuzzleFlash() spawnBullet() selectRandomSound().play() But now I often get a crackling noise (which I assume is when two or more guns are firing at the same time and confuse the sound-device). My question is whether A) This a common problem and there is a well-known solution, maybe to do with the channels or something, or B) I am using a completely wrong approach to the task. I had a look at some sound-assets for other games and they used complete burst with multiple shots. I suppose I could try that, but I would like to have organic little hickups in the gun-fire (that's what the random value is for) to make the game more gritty and dirty. I am using Panda3D, but I had the exact same problem in PyGame and SDL. [edit] Thanks a lot for the answers so far! One more problem with faking it though: Now how do I stop the sound? Let's say I have an effect with 5 bangs... *bang* *bang* *bang* *bang* *bang* And I magically manage to loop it so that there's no gap or overlap if the player fires more than 5 shots. Now, what do I do if the player stops firing halfway through the third bang? How do I know how long to keep playing the sample so that the third bang is completed and I can start playing the rumbling echo of the last shot? Of course I can look up the shot/pause timing of that sound-sample and code accordingly, but it feels extremely hacky.

  Read the article

• Enterprise Cloud Infrastructure for Dummies eBook

  - by ferhat

  Are you considering "going to the cloud" as a way to cut IT costs and maximize your virtualization investments? Then Enterprise Cloud Infrastructure for Dummies is a no-nonsense guide to help you navigate this hot topic. This user friendly guide explains how to cut through the noise and take advantage of integrated virtualization and management tools to implement a cloud infrastructure that not only lowers operational costs but that can easily adapt and scale to run a broad range of application services safely and securely. &amp;amp;<span id="XinhaEditingPostion"></span>amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;gt; This e-book will serve as a valuable Cloud computing guide covering important topics such as: The current overall cloud landscape and how to best leverage private cloud infrastructure How to build an effective Enterprise Cloud Infrastructure using the Oracle Optimized Solution methodology Quantifiable costs savings gained using Oracle's integrated hardware and software and Optimized Solutions Download your exclusive copy of Enterprise Cloud Infrastructure, Oracle Special Edition today.

  Read the article

• Can I fully disable my PCIe Video/Graphics Card per BIOS/Software?

  - by Jook

  Because of a quite noisy fan of my HD6700 I was wondering, if I could fully disable my video card through BIOS or even some Software/Windows. Switching to Intel I7 2600 internal video helped already with the noise, but it would be great to have the HD6700 only build in, but not activated/powered. So that the fan could stay compleatly off. Of course, I could just remove the video card, but I would like to avoid that. Is there any way? My Mainboard is an ASUS P8H67-M Pro, with Intel I7 2600 and ATI HD6500

  Read the article

• VMWare Workstation Dev Machine Disks: one fast or four echofriendly raid?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines - A dev machine running VS-2010, a build machine, a version-control machine, a web server for testing, a "personal" machine running office etc. I'll be connecting the computer to my stereo, so I'll also be running iTunes (possible on a dedicated VM) and I want the computer to be a silent one. I'll probably use an Antec P183 case. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. So, my question is as follows: In terms of heat, noise, reliability, warranty, price, capacity and performance, what would you suggest: A Raid10 4 disk array using eco-friendly disks such as the $94 1TB Western Digital Caviar Green, or one high performance disk such as the 2TB Western Digital Caviar Black at $280?

  Read the article

• How to delete system default printer forms?

  - by matt wilkie

  On Windows there are system default printer forms which can't be deleted from the Print Server Properties dialog. Is there some other way they can be removed? We are never going to use page sizes like Envelope, B5(JIS), US Std Fanfold, etc. and I'd like to save users (and myself!) from having to scroll through a big long list of noise. Our print servers are Windows Server 2003 if that makes any difference. thanks.

  Read the article

• The Talent Behind Customer Experience

  - by Christina McKeon

  Earlier, I wrote about Powerful Data Lessons from the Presidential Election. A key component of the Obama team’s data analysis deserves its own discussion—the people. Recruiters are probably scrambling to find out who those Obama data crunchers are and lure them into corporations. For the Obama team, these data scientists became a secret ingredient that the competition didn’t have. This team of analysts knew how to hear the signal and ignore the noise, how to segment and target its base, and how to model scenarios and revise plans based on what the data told them. The talent was the difference. As you work to transform your organization to be more customer-centric, don’t forget that talent is a critical element. Journey mapping is a good start to understanding how your talent impacts your customer experiences. Part of journey mapping includes documenting the “on-stage” and “back-stage” systems and touchpoints. When mapping this part of your customers’ journey, include the roles and talent behind the employee actions—both customer facing and further upstream from that customer touchpoint. Know what each of these roles does, how well you are retaining people in these areas, and your plans to fill these open positions in the future. To use data scientists as an example, this job will be in high demand over the next 10 years. The workforce is shrinking, and higher education institutions may not be able to turn out trained data scientists as fast as you need them. You don’t want to be caught with a skills deficit, so consider how you can best plan for the future talent you will need. Have your existing employees make their career aspirations known to you now. You may find you already have employees willing to take on roles that drive better customer experiences. Then develop customer experience talent from within your organization through targeted learning programs. If you know that you will need to go outside the organization, build those candidate relationships now. Nurture the candidates you want to hire and partner with universities, colleges, and trade associations so you can increase the number of qualified candidates in your talent pool.

  Read the article

• hardware: delay and distinct 'click' before hard drive access

  - by matt lohkamp

  I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

  Read the article

• When is it time to buy a new hard drive, and what considerations go into buying a new hard drive?

  - by user1125620

  I've had my current hard drive for about 4-5 years now, and I've never had a problem with it before, but now it's making whirring noises. It's done this before and, last time, the noise did go away the next day, but I have accumulated quite a bit of information that I wouldn't want to lose on the drive. HD Tune Pro and Berlac Advisor both said the drive was healthy, and I wouldn't want to get a new one unless it was absolutely necessary or was going to show drastic performance improvements. My only knock against the drive would be that Visual Studio takes longer to load than I'd like it to. HD Tune Pro says the average read speed is 54.3MB/s. I'm not sure if that's good or bad, but it seems about average compared to similar drives on http://www.hdtune.com/testresults.html. Model #: WDC WD5000AAJS-22YFA0 So, should hard drives be replaced after a certain amount of time? Has mine reached that point? Would a new hard drive be any faster?

  Read the article

• Caching by in-memory dictionaries. Are we doing it all wrong?

  - by user73983

  This approach is pretty much the accepted way to do anything in our company. A simple example : when a piece of data for a customer is requested from a service, we fetch all the data for that customer(relevant part to the service) and save it in a in-memory dictionary then serve it from there on following requests(we run singleton services). Any update goes to DB, then updates the in memory dictionary. It seems all simple and harmless but as we implement more complicated business rules the cache gets out of sync and we have to deal with hard to find bugs. Sometimes we defer writing to database, keeping new data in cache till then. There are cases when we store millions of rows in memory because the table has many relations to other tables and we need to show aggregate data quickly. All this cache handling is a big part of our codebase and I sense this is not the right way to do it. All of this juggling adds too much noise to the code and it makes it hard to understand the actual business logic. However I don't think we can serve data in a reasonable amount of time if we have to hit the database every time. I am unhappy about the current situation but I don't have a better alternative. My only solution would be to use NHibernate 2nd level cache but I have nearly no experience with it. I know many campanies use Redis or MemCached heavily to gain performance but I have no idea how I would integrate them into our system. I also don't know if they can perform better than in-memory data structures and queries. Are there any alternative approaches that I should look into?

  Read the article

• Wireless keeps disabling or stays disconnected (Realtek RTL8191SEvB)

  - by jindrichm

  I have Realtek RTL8191SEvB wireless card on Ubuntu 10.10: $ lspci -v | grep Network 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) When I load its driver, according to the Network Manager it sometimes blinks with a list of available networks but it keeps disabling itself or it stays disconnected. So, I can't connect to any wi-fi network (which results in frustration). The driver is loaded: $ lsmod Module Size Used by r8192se_pci 509932 0 Looks normal: $ sudo lshw -C network *-network description: Wireless interface product: RTL8191SEvB Wireless LAN Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 10 serial: 1c:65:9d:60:c7:7a width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 latency=0 link=no multicast=yes wireless=802.11bgn resources: irq:17 ioport:2000(size=256) memory:f0500000-f0503fff Configured: $ sudo iwconfig wlan0 wlan0 802.11bgn Nickname:"rtl8191SEVA2" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:130 Mb/s Retry:on RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Is not blocked: $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: yes However something's happening with it: $ dmesg [ 6485.948668] InitializeAdapter8190(): ==++==> Turn off RF for RfOffReason(1073741824) ---------- [ 6486.062666] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.062671] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.062675] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.064091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6486.248761] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.248771] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.248776] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.580083] GPIOChangeRF - HW Radio OFF [ 6486.610085] ============>sync_scan_hurryup out [ 6486.623814] ================>r8192_wx_set_scan(): hwradio off [ 6486.830484] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return So, does anyone know where the problem might be?

  Read the article

• CodePlex Daily Summary for Wednesday, September 05, 2012

  CodePlex Daily Summary for Wednesday, September 05, 2012Popular ReleasesDesktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.BLACK ORANGE: HPAD TEXT EDITOR 0.9 Beta: HOW TO RUN THE TEXT EDITOR Download the HPAD ARCHIVED FILES which is in .rar format Extract using Winrar Make sure that extracted files are in the same folder Double-Click on HPAD.exe application fileTelerikMvcGridCustomBindingHelper: Version 1.0.15.247-RC2: TelerikMvcGridCustomBindingHelper 1.0.15.247 RC2 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. This release is all about performance and fixes Support: "Or" and "Does Not contain" filter options Improved BooleanSubstitutes, Custom Aggregates and expressions-to-queryover Add EntityFramework examples in ExampleWebApplication Many other improvements and fixes Fix invalid cast on CustomAggregates Support for ...ServiceMon - Extensible Real-time, Service Monitoring Utility: ServiceMon Release 0.9.0.44: Auto-uploaded from build serverJavaScript Grid: Release 09-05-2012: Release 09-05-2012xUnit.net Contrib: xunitcontrib-dotCover 0.6.1 (dotCover 2.1 beta): xunitcontrib release 0.6.1 for dotCover 2.1 beta This release provides a test runner plugin for dotCover 2.1 beta, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release adds support for running xUnit.net tests to dotCover 2.1 beta's Visual Studio plugin. PLEASE NOTE: You do NOT need this if you also have ReSharper and the existing 0.6.1 release installed. DotCover will use ReSharper's test runners if available. This release includes th...B INI Sharp Library: B INI Sharp Library v1.0.0.0 Realsed: The frist realsedActive Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsA Simple Eng-Hindi CMS: A simple English- Hindi dual language content management system for small business/personal websites.Active Social Migrator: This project for managing the Active Social migration tool.ANSI Console User Control: Custom console control for .NET WinformsAutoSPInstallerGUI: GUI Configuration Tool for SPAutoInstaller Codeplex ProjectCode Documentation Checkin Policy: This checkin policy for Visual Studio 2012 checks if c# code is documented the way it's configured in the config of the policy. Code Dojo/Kata - Free Time Coding: Doing some katas of the Coding Dojo page. http://codingdojo.org/cgi-bin/wiki.pl?KataCataloguefjycUnifyShow: fjycUnifyShowHidden Capture (HC): HC is simple and easy utility to hidden and auto capture desktop or active windowHRC Integration Services: Fake SQL Server Integration Services. LOLKooboo CMS Sites Switcher: Kooboo CMS Sites SwitcherMod.CookieDetector: Orchard module for detecting whether cookies are enabledMyCodes: Created!MySQL Statement Monitor: MySQL Statement Monitor is a monitoring tool that monitors SQL statements transferred over the network.NeoModulusPIRandom: The idea with PI Random is to use easy string manipulation and simple math to generate a pseudo random number. Net Core Tech - Medical Record System: This is a Medical Record System ProjectOraPowerShell: PowerShell library for backup and maintenance of a Oracle Database environment under Microsoft Windows 2008PinDNN: PinDNN is a module that imparts Pinterest-like functionality to DotNetNuke sites. This module works with a MongoDB database and uses the built-in social relatioPyrogen Code Generator: PyroGen is a simple code generator accepting C# as the markup language.restMs: wil be deleted soonScript.NET: Script.NET is a script management utility for web forms and MVC, using ScriptJS-like features to link dependencies between scripts.SpringExample-Pagination: Simple Spring example with PaginationXNA and Component Based Design: This project includes code for XNA and Component Based Design

  Read the article

• Why is the pavucontrol level indicator jumping while nothing plays?

  - by EnterTheLiquidToasterFamily

  The level indicator in the screenshot does jump around even if nothing is playing. The indicator also reasonably represents sound levels when music is playing. I dont have any mediaservers running or noisy browsertabs open. Also no mic connected. When I turn the volume to max in software and on the amp, there is no noise from the speakers at all. Played music is loud and not distorted. Hardware: Realtek ALC889 over optical audio connector to a generic amp. Software: Debian Wheezy with latest backport kernel 3.14 (same thing on wheezy 3.2 stock), wheezy pulseaudio, xfce session, a custom asound.conf that enables pulseaudio to push sound over optical port. /etc/asound.conf pcm.a52 { @args [CARD] @args.CARD { type string } type rate slave { pcm { type a52 bitrate 448 channels 6 card $CARD } rate 48000 #required somehow, otherwise nothing happens in PulseAudio } }

  Read the article

• Cannot set audio input volume (internal microphone) on mac

  - by JohnIdol

  On a macbook air (MacOS X 10.6.5), when doing skype calls people are complaining they hear me very low - so I had a look to the system preferences under audio and noticed the input volume was 54%. I am now trying to set the input volume to 100%. To my surprise the volume is gradually set back as I speak. I tried deselecting 'use ambient noise reduction' but it doesn't help.' Is there any way to avoid this volume auto-setting feature? Any help appreciated!

  Read the article

• How to know my wireless card has injection enabled?

  - by shrimpy

  I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

  Read the article

• How do I connect a laptop running Windows 7 to an Android phone using WiFi Direct?

  - by user130768

  From where I am sitting, Windows 7 does not appear to support WiFi Direct connections to Android mobile devices. Specifically, turning on WiFi Direct on my Samsung Galaxy S II does not make the device visible as a potential WiFi network connection. Windows 8 is said to support WiFi Direct, but I have no desire to upgrade at this time. I have successfully set up ad hoc WiFi connections between the S II and my laptop before, but as you may be aware, these are not the same as WiFi Direct. Before posting this question, I searched [ "Windows 7" "WiFi Direct" ] and variations thereof, and dutifully slogged through dozens of lame or irrelevant responses on various forums, badly made YouTube videos, and probable Trojan horse distribution sites. If someone out there knows how to do this, it's buried in the noise.

  Read the article

• Windows 7 does not 'wake up' from Sleep mode

  - by the watchmaker

  I'm new to Windows 7, so I don't know if this is normal. When the computer is idle for 30 minutes, the screen goes black and no key pressing or mouse movement will bring the computer out of standby. The computer is still running (fans and hard drive noise) but it will not respond and the screen remains black. The only way to get a response is to press and hold the power button until it goes off, then switch it back on. When it turns on it says "Resuming Windows" and then goes black again. Is this normal? Can the time-out delay be increased? Is there a better workaround than switching the PC on and off?

  Read the article

• video card for only watching videos

  - by Nothing 2 Lose

  I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

  Read the article

• Any good resources on setting up an ubuntu virtual machine for web development?

  - by Relequestual

  I'm currently on my placement year at uni with 4 months left. Before working at my current place, I have not used a nix environment for web development and have used WAMP. Over the past year I have found some very interesting new tech that requires a bit more than my shared hosting even to play with (eg node.js, RoR 3). At work we use a Virtual Machine for development, but that's all been set up and configured to match the live servers, and is managed with a Puppet server. Are there any really good resources for setting up and configuring an Ubuntu VM as a web server? Work currently uses Ubuntu so I would assume this is a good OS to use. I do of course know how to use google, but the noise ratio is just too big, so thought I'd ask here, as I know many of you will have a ton of bookmarks. Cheers.

  Read the article

• Headphones not working in ubuntu 12.04LTS

  - by mursalat

  So after a million warnings about not supported ubuntu OS, last night I finally upgraded to 12.04 - went somewhat smoothly (sadly) After my installation I got all excited with the exciting new look when I login, and all the new shebang, gently I installed chrome and went to youtube to check out some of my music and test flash in the process, now the sound worked awesomely, however when I plugged in my headphones, I could hear only a buzz-like sound when the base drops or there is a loud noise, maybe I didn't hear it from the headphones, but some other source. However sadly my headphones are not working, and I am a noob at fixing these stuff on Ubuntu. I've done loads of programming but when it comes to linux drivers and settings I seem to get frustrated. So I would really appreciate any help people! IN SUMMARY: My headphones are not working, my laptop's internal speakers are working awesome. To be as helpful as I can I have pasted the output from lspci -v to http://pastebin.com/VQNzDkZs I have also checked the volume levels from alsamixer and none are on mute. If you need any more information, please just ask, and I will be checking this post every 3 to 4 hours! Cheers!

  Read the article

• using one disk as cache for others

  - by HugoRune

  Hi Given a PC with several hard drives: Is it possible to use one fast disk as a giant file cache? I.e. automatically copying frequently accessed data to that one disk, and transparently redirecting reads and writes to that disk, so that other drives would only have be accessed occassionally. (writes would have to be forwarded to the other disks after a while of course) Advantages: the other drives could be powered down most of the time; reducing power, heat, noise speed of the other drives would not matter much. cache disk could be solid state. How can I set such a system up? What OS supports these options? Is this possible at all using Windows or Linux?

  Read the article

• Software architecture map to aid cross team communication?

  - by locster

  I work in a company where multiple teams each work on different parts of a software product in a vaguely agile/scrum manner. Mostly the organisation works well but there have been instances where a team may make a change without realising its impact on other teams. Where dependence is known communication has been good, and where dependence is suspected then 'broadcast' emails and informal conversations have also worked well. But there exists a sub-set of tasks that fall between the cracks. Broadcast emails are likely not the solution as they would become too numerous such that the email signal/noise ratio would fall. I'm contemplating a solution that involves a sort of map of the software, which details all of the various parts of the system and loosely tries to place interacting and dependent parts near to each other. Each developer then updates their position on the map (today I'm working on X and Y), and therefore if two or more developers happen to be co-located (or proximate) on the map then we can see this each day and this could form the trigger for further discussion on possible overlap and conflict. Is such a method out there and in use? If so what is it and does it work? Otherwise, do you think such a scheme has merit?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >