Search Results

Search found 47491 results on 1900 pages for 'super x man'.

Page 49/1900 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Linux filesystem with inodes close on the disk

  - by pts

  I'd like to make the ls -laR /media/myfs on Linux as fast as possible. I'll have 1 million files on the filesystem, 2TB of total file size, and some directories containing as much as 10000 files. Which filesystem should I use and how should I configure it? As far as I understand, the reason why ls -laR is slow because it has to stat(2) each inode (i.e. 1 million stat(2)s), and since inodes are distributed randomly on the disk, each stat(2) needs one disk seek. Here are some solutions I had in mind, none of which I am satisfied with: Create the filesystem on an SSD, because the seek operations on SSDs are fast. This wouldn't work, because a 2TB SSD doesn't exist, or it's prohibitively expensive. Create a filesystem which spans on two block devices: an SSD and a disk; the disk contains file data, and the SSD contains all the metadata (including directory entries, inodes and POSIX extended attributes). Is there a filesystem which supports this? Would it survive a system crash (power outage)? Use find /media/myfs on ext2, ext3 or ext4, instead of ls -laR /media/myfs, because the former can the advantage of the d_type field (see in the getdents(2) man page), so it doesn't have to stat. Unfortunately, this doesn't meet my requirements, because I need all file sizes as well, which find /media/myfs doesn't print. Use a filesystem, such as VFAT, which stores inodes in the directory entries. I'd love this one, but VFAT is not reliable and flexible enough for me, and I don't know of any other filesystem which does that. Do you? Of course, storing inodes in the directory entries wouldn't work for files with a link count more than 1, but that's not a problem since I have only a few dozen such files in my use case. Adjust some settings in /proc or sysctl so that inodes are locked to system memory forever. This would not speed up the first ls -laR /media/myfs, but it would make all subsequent invocations amazingly fast. How can I do this? I don't like this idea, because it doesn't speed up the first invocation, which currently takes 30 minutes. Also I'd like to lock the POSIX extended attributes in memory as well. What do I have to do for that? Use a filesystem which has an online defragmentation tool, which can be instructed to relocate inodes to the the beginning of the block device. Once the relocation is done, I can run dd if=/dev/sdb of=/dev/null bs=1M count=256 to get the beginning of the block device fetched to the kernel in-memory cache without seeking, and then the stat(2) operations would be fast, because they read from the cache. Is there a way to lock those inodes and/or blocks into memory once they have been read? Which filesystem has such a defragmentation tool?

  Read the article

• How to create NTFS partition in Linux to install Windows 7 from USB?

  - by Michal Stefanow

  I messed up with my computer and need help. Generally: install Windows 7 from USB. Problem: "setup was unable to create a new system partition" When first attempt to install Windows 7 failed I tried Linux live USB, installed distro to HDD, and erased all the existing partitions. Current state (fdisk -l): [writing from other computer so no copy and paste] /dev/sda1 305GB Linux /dev/sda2 7GB Extended /dev/sda5 7GB Linux Swam / Solaris To create a new, NTFS partition: fdisk /dev/sda n (for new) p (for primary) 3 (for partintion number) "No free sectors available" All the HDD was formatted couple of minutes before so there is a lot of free space but how to resize a parition? I cannot find an option for resizing in man fdisk. Some people say I should use gparted but my distro doesn't not contain this package. And my distro doesn't support wireless drivers so I have serious problems with downloading stuff. I tried also using cfdisk but any command results in: "cfdisk bad primary partition 1 partition ends in the final partial cylinder" I tried also removing partition 1 and then creating a new one (so there is no "no free sectors"). I'm receiving a warning: "Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot." After restating: "grub rescue, no known filesystem" It may indicate that some changes have been made BUT when running Windows 7 installed some another error: "Windows cannot be installed to Disk 0 Partition 1" More detailed: "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS." So formatting drive using Windows 7 installer BUT this time yet another error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" Apparently I cannot access logs (how?) and I am back to drawing board with my live USB (this time showing partition as HPFS/NTFS). Any suggestions how to install Windows 7? Should I reinstall Linux to HDD, erase existing partitions once again, and use Parted rather than gparted (parted is included in the distro). Or maybe should I create another bootable USB such as PartedMagic to painlessly create partitions? I just want to install Windows 7 from USB, my laptop is semi-operational and I am ready to receive some help regarding fdisk and creating NTFS partitions. UPDATE: I did as suggested (removed all the partitions) and tried to install in unallocated space. Tried to create a new partition and format it. Same error: "setup was unable to create a new system partition" Came to the conclusion it may have something to do with TrueCrypt I have recently installed. Right now trying to FIX MBR (as I haven't got possibility to create rescue disc without optical drive)

  Read the article

• Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

  - by amn

  Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

  Read the article

• a couple of questions about proxy server,vpn & how they works

  - by Q8Y

  I have a couple of questions that are related to security. Correct me if i'm wrong :) If I want to request something (ex: visiting www.google.com): my computer will request that then it will to the ISP then to my ISP proxy server that will take the request and act as a middle man in this situation ask for the site (www.google.com) and retrieve it then the proxy will send it back to me. I know that its being done like that. So, my question is that, in this situation my ISP knows everything and what I did request, and the proxy server is set by default (when I ask for an internet subscription). So, if I use here another proxy (lets assume that is a highly anonymous and my ISP can't detect my IP address from it), would I visit my ISP and then from my ISP it will redirect me to the new proxy server that I provide? Will it know that there is someone using another proxy? Or will it go to another network rather than my ISP? Because I didn't get the view clearly. This question is related to the first one. When I use a VPN, I know that VPN provides for me a tunneling, encryption and much more features that a proxy can't. So my data is travelling securely and my ISP can't know what I'm doing. But my questions are: From where is the tunneling started? Does it start after I visit the ISP network (since they are the one that are responsible for forwarding my data and requests)? If so, then not all my connection is tunneled in this way, there is a part that is not being tunneled. Since, every time I need to do anything I have to go to my ISP and ask to do that. Correct me if I misunderstand this. I know that VPN can let my computer be virtually in another place and access its resources (ex: be like in my office while I'm in my home. This is done via VPN). If I use a VPN service provider so that I can access the internet securely and without being monitored by my ISP. In this case, where is my encrypted data saved? Is it saved in my ISP or in the VPN service provider? If I use a VPN, does anyone on the internet know what I'm doing or who I am? Even the VPN service provider? Can they know me? I think they should know the person that is asking for this VPN service, am I right?

  Read the article

• ssh, "Last Login", `last` and OS X

  - by allentown

  I have hit the googles as much as I can on this, being specific to OS X, I am not finding an answer. Nothing is wrong, but curiosity levels are high. $ssh [email protected] Password: Last login: Wed Apr 7 21:28:03 2010 from my-laptop.local ^lonely tylenol^ Line 1 is my command line 2 is the shell asking for the password line 3 is where my question comes from line 4 comes out of /etc/motd I can find nothing in ~/ of an of the .bash* files that contains the string "Last Login", and would like to alter it. It performs some type of hostname lookup, which I can not determine. If I ssh to another host: $ssh [email protected] Last login: Wed Apr 7 21:14:51 2010 from 123-234-321-123-some.cal.isp.net.example hi there, you are on box 456 line 1 is my command line 2 is again, where my question comes from line 3 is from /etc/motd *The dash'd IP address is not reversed On this remote host, I have ~/.ssh and it's corresponding keys set up, so there was no password request Where is the "Last Login:" coming from, where does the date stamp come from, and most importantly, where does the hostname come from? While on [email protected] (box 456) $echo hostname remote.location.example456.com Or with dig, to make sure I have rDNS/PTR set up, for which I am not authoritative, but my ISP has correctly set... $dig -x 123.234.321.123 PTR remote.location.example456.com or $dig PTR 123.321.234.123.in-addr.arpa. +short remote.location.example456.com. my previous hostname used to be 123-234-321-123-some.cal.isp.net.example, which I set with hostname -s remote.location.example456.com, because it was obnoxious to see such a long name. That solves the value of $echo hostname which now returns remote.location.example456.com. Mac OS X, 10.6 is this case, does seem to honor: touch ~/.hushlogin If leave that file empty, I get nothing on the shell when I login. I want to know what controls the host resolution of the IP, and how it is all working. For example, running last reports a huge list of my logins, which have obtusely long hostnames, when they would be preferable to just be remote.location.example456.com. More confusing to me, reading the man page for wtmp and lastlog, it looks like lastlog is not used on OS X, /var/log/lastlog does not exist. Actually, none of these exist on 10.5 or 10.6: /var/run/utmp The utmp file. /var/log/wtmp The wtmp file. /var/log/lastlog The lastlog file. If I am to assume that the system is doing some kind of reverse lookup, I certainly do not know what it is, as it is not an accurate one.

  Read the article

• iOS TableView crash loading different data

  - by jollyr0ger

  Hi to all! I'm developing a simple iOS app where there is a table view with some categories (CategoryViewController). When clicking one of this category the view will be passed to a RecipesListController with another table view with recipes. This recipes are loaded from different plist based on the category clicked. The first time I click on a category, the recipes list is loaded and shown correctely. If i back to the category list and click any of the category (also the same again) the app crash. And I don't know how. The viewWillAppear is ececuted correctely but after crash. Can you help me? If you need the entire project I can zip it for you. Ok? Here is the code of the CategoryViewController.h #import <Foundation/Foundation.h> #import "RecipeRowViewController.h" @class RecipesListController; @interface CategoryViewController : UITableViewController { NSArray *recipeCategories; RecipesListController *childController; } @property (nonatomic, retain) NSArray *recipeCategories; @end The CategoryViewControoler.m #import "CategoryViewCotroller.h" #import "NavAppDelegate.h" #import "RecipesListController.h" @implementation CategoryViewController @synthesize recipeCategories; - (void)viewDidLoad { // Create the categories NSArray *array = [[NSArray alloc] initWithObjects:@"Antipasti", @"Focacce", @"Primi", @"Secondi", @"Contorni", @"Dolci", nil]; self.recipeCategories = array; [array release]; // Set background image UIImageView *bgImg = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"sfondo_app.png"]]; [self.tableView setBackgroundView:bgImg]; [bgImg release]; [self.tableView reloadData]; [super viewDidLoad]; } - (void)viewDidUnload { self.recipeCategories = nil; // [childController release]; [super viewDidUnload]; } - (void)dealloc { [recipeCategories release]; // [childController release]; [super dealloc]; } #pragma mark - #pragma mark Table data source methods - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [recipeCategories count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellId = @"RecipesCategoriesCellId"; // Try to reuse a cell or create a new one UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellId]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellId] autorelease]; } // Get the right value and assign to the cell NSUInteger row = [indexPath row]; NSString *rowString = [recipeCategories objectAtIndex:row]; cell.textLabel.text = rowString; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; [rowString release]; return cell; } #pragma mark - #pragma mark Table view delegate methods - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { if (childController == nil) { childController = [[RecipesListController alloc] initWithStyle:UITableViewStyleGrouped]; } childController.title = @"Ricette"; childController.category = [indexPath row]; [self.navigationController pushViewController:childController animated:YES]; } @end The RecipesListController.h #import <Foundation/Foundation.h> #import "RecipeRowViewController.h" #define kRecipeArrayLink 0 #define kRecipeArrayDifficulty 1 #define kRecipeArrayFoodType 2 #define kRecipeAntipasti 0 #define kRecipeFocacce 1 #define kRecipePrimi 2 #define kRecipeSecondi 3 #define kRecipeContorni 4 #define kRecipeDolci 5 @class DisclosureDetailController; @interface RecipesListController : UITableViewController { NSInteger category; NSDictionary *recipesArray; NSArray *recipesNames; NSArray *recipesLinks; DisclosureDetailController *childController; } @property (nonatomic) NSInteger category; @property (nonatomic, retain) NSDictionary *recipesArray; @property (nonatomic, retain) NSArray *recipesNames; @property (nonatomic, retain) NSArray *recipesLinks; @end The RecipesListcontroller.m #import "RecipesListController.h" #import "NavAppDelegate.h" #import "DisclosureDetailController.h" @implementation RecipesListController @synthesize category, recipesArray, recipesNames, recipesLinks; - (void)viewDidLoad { // Set background image UIImageView *bgImg = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"sfondo_app.png"]]; [self.tableView setBackgroundView:bgImg]; [bgImg release]; [self.tableView reloadData]; [super viewDidLoad]; } - (void)viewWillAppear:(BOOL)animated { if (self.recipesArray != nil) { // Release the arrays [self.recipesArray release]; [self.recipesNames release]; } // Load the dictionary NSString *path = nil; // Load a different dictionary, based on the category if (self.category == kRecipeAntipasti) { path = [[NSBundle mainBundle] pathForResource:@"recipes_antipasti" ofType:@"plist"]; } else if (self.category == kRecipeFocacce) { path = [[NSBundle mainBundle] pathForResource:@"recipes_focacce" ofType:@"plist"]; } else if (self.category == kRecipePrimi) { path = [[NSBundle mainBundle] pathForResource:@"recipes_primi" ofType:@"plist"]; } else if (self.category == kRecipeSecondi) { path = [[NSBundle mainBundle] pathForResource:@"recipes_secondi" ofType:@"plist"]; } else if (self.category == kRecipeContorni) { path = [[NSBundle mainBundle] pathForResource:@"recipes_contorni" ofType:@"plist"]; } else if (self.category == kRecipeDolci) { path = [[NSBundle mainBundle] pathForResource:@"recipes_dolci" ofType:@"plist"]; } NSDictionary *dict = [[NSDictionary alloc] initWithContentsOfFile:path]; self.recipesArray = dict; [dict release]; // Save recipes names NSArray *array = [[recipesArray allKeys] sortedArrayUsingSelector: @selector(compare:)]; self.recipesNames = array; [self.tableView reloadData]; [super viewWillAppear:animated]; } - (void)viewDidUnload { self.recipesArray = nil; self.recipesNames = nil; self.recipesLinks = nil; // [childController release]; [super viewDidUnload]; } - (void)dealloc { [recipesArray release]; [recipesNames release]; [recipesLinks release]; // [childController release]; [super dealloc]; } #pragma mark - #pragma mark Table data source methods - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [recipesNames count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *RecipesListCellId = @"RecipesListCellId"; // Try to reuse a cell or create a new one UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:RecipesListCellId]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:RecipesListCellId] autorelease]; } // Get the right value and assign to the cell NSUInteger row = [indexPath row]; NSString *rowString = [recipesNames objectAtIndex:row]; cell.textLabel.text = rowString; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; [rowString release]; return cell; } #pragma mark - #pragma mark Table view delegate methods - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { if (childController == nil) { childController = [[DisclosureDetailController alloc] initWithNibName:@"DisclosureDetail" bundle:nil]; } childController.title = @"Dettagli"; NSUInteger row = [indexPath row]; childController.recipeName = [recipesNames objectAtIndex:row]; NSArray *recipeRawArray = [recipesArray objectForKey:childController.recipeName]; childController.recipeLink = [recipeRawArray objectAtIndex:kRecipeArrayLink]; childController.recipeDifficulty = [recipeRawArray objectAtIndex:kRecipeArrayDifficulty]; [self.navigationController pushViewController:childController animated:YES]; } @end This is the crash log Program received signal: “EXC_BAD_ACCESS”. (gdb) bt #0 0x00f0da63 in objc_msgSend () #1 0x04b27ca0 in ?? () #2 0x00002665 in -[RecipesListController viewWillAppear:] (self=0x4b38a00, _cmd=0x6d81a2, animated=1 '\001') at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/RecipesListController.m:67 #3 0x00370c9a in -[UINavigationController _startTransition:fromViewController:toViewController:] () #4 0x0036b606 in -[UINavigationController _startDeferredTransitionIfNeeded] () #5 0x0037283e in -[UINavigationController pushViewController:transition:forceImmediate:] () #6 0x04f49549 in -[UINavigationControllerAccessibility(SafeCategory) pushViewController:transition:forceImmediate:] () #7 0x0036b4a0 in -[UINavigationController pushViewController:animated:] () #8 0x00003919 in -[CategoryViewController tableView:didSelectRowAtIndexPath:] (self=0x4b27ca0, _cmd=0x6d19e3, tableView=0x500c200, indexPath=0x4b2d650) at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/CategoryViewCotroller.m:104 #9 0x0032a794 in -[UITableView _selectRowAtIndexPath:animated:scrollPosition:notifyDelegate:] () #10 0x00320d50 in -[UITableView _userSelectRowAtPendingSelectionIndexPath:] () #11 0x000337f6 in __NSFireDelayedPerform () #12 0x00d8cfe3 in __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ () #13 0x00d8e594 in __CFRunLoopDoTimer () #14 0x00ceacc9 in __CFRunLoopRun () #15 0x00cea240 in CFRunLoopRunSpecific () #16 0x00cea161 in CFRunLoopRunInMode () #17 0x016e0268 in GSEventRunModal () #18 0x016e032d in GSEventRun () #19 0x002c342e in UIApplicationMain () #20 0x00001c08 in main (argc=1, argv=0xbfffef58) at /Users/claudiocanino/Documents/iOS/CottoMangiato/main.m:15 Another bt log: (gdb) bt #0 0x00cd76a1 in __CFBasicHashDeallocate () #1 0x00cc2bcb in _CFRelease () #2 0x00002dd6 in -[RecipesListController setRecipesArray:] (self=0x6834d50, _cmd=0x4293, _value=0x4e3bc70) at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/RecipesListController.m:16 #3 0x00002665 in -[RecipesListController viewWillAppear:] (self=0x6834d50, _cmd=0x6d81a2, animated=1 '\001') at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/RecipesListController.m:67 #4 0x00370c9a in -[UINavigationController _startTransition:fromViewController:toViewController:] () #5 0x0036b606 in -[UINavigationController _startDeferredTransitionIfNeeded] () #6 0x0037283e in -[UINavigationController pushViewController:transition:forceImmediate:] () #7 0x091ac549 in -[UINavigationControllerAccessibility(SafeCategory) pushViewController:transition:forceImmediate:] () #8 0x0036b4a0 in -[UINavigationController pushViewController:animated:] () #9 0x00003919 in -[CategoryViewController tableView:didSelectRowAtIndexPath:] (self=0x4b12970, _cmd=0x6d19e3, tableView=0x5014400, indexPath=0x4b2bd00) at /Users/claudiocanino/Documents/iOS/CottoMangiato/Classes/CategoryViewCotroller.m:104 #10 0x0032a794 in -[UITableView _selectRowAtIndexPath:animated:scrollPosition:notifyDelegate:] () #11 0x00320d50 in -[UITableView _userSelectRowAtPendingSelectionIndexPath:] () #12 0x000337f6 in __NSFireDelayedPerform () #13 0x00d8cfe3 in __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ () #14 0x00d8e594 in __CFRunLoopDoTimer () #15 0x00ceacc9 in __CFRunLoopRun () #16 0x00cea240 in CFRunLoopRunSpecific () #17 0x00cea161 in CFRunLoopRunInMode () #18 0x016e0268 in GSEventRunModal () #19 0x016e032d in GSEventRun () #20 0x002c342e in UIApplicationMain () #21 0x00001c08 in main (argc=1, argv=0xbfffef58) at /Users/claudiocanino/Documents/iOS/CottoMangiato/main.m:15 Thanks

  Read the article

• htaccess mod_rewrite conundrum

  - by kelton52

  Ok, so I have this .htaccess file that contains this <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php?p=%{REQUEST_URI}&%{QUERY_STRING} [L] </IfModule> Problem is, that in apache 2.2.22, the p and the other query objects don't come through, but it works great in apache 2.4.2 . So basically in apache 2.2.22 it just forwards everything to index.php, but it doesn't have any get objects. Any help, thanks. Update Ok so I changed the line RewriteRule . /index.php?p=%{REQUEST_URI}&%{QUERY_STRING} [L] to RewriteRule ^(.*) /index.php?p=$1 [L,QSA] And now on apache 2.2.22 the p GET doesn't go through, but any specific queries I add go through. So If I do http://localhost/index/fun/buns/funds?man=woman on 2.4.2 I get array (size=2) 'p' => string 'index/fun/buns/funds' (length=20) 'man' => string 'woman' (length=5) and on 2.2.22 I get array(1) { ["man"]=> string(5) "woman" } To be clear What's happening on 2.4.2 is what I want, and 2.2.22 isn't cooperating. Another Update Ok so it seems like what is happening is that when I do /index/whatever, it auto assumes index.php, and ignores that, it auto adds the .php to it, when I don't want it to. Any ideas on how to stop that?

  Read the article

• How to access a String that is in JSON array format

  - by Sayem Ahmed

  I have an asp.net page which is returning a list of object as a json string to an ajax request. The string is as follows : [ {"Name":"Don","Age":23,"Description":"Tall man with no glasses"} ,{"Name":"Charlie","Age":24,"Description":"Short man with glasses"} ] I want to access each field individually, like the name of the person, his age, his description etc. How can I do that? I am using JQuery for client-side scripting.

  Read the article

• Why does multiplying a double by -1 not give the negative of the current answer

  - by Ankur

  I am trying to multiply a double value by -1 to get the negative value. It continues to give me a positive value double man = Double.parseDouble(mantissa); double exp; if(sign.equals("plus")){ exp = Double.parseDouble(exponent); } else { exp = Double.parseDouble(exponent); exp = exp*-1; } System.out.println(man+" - "+sign+" - "+exp); The printed result is 13.93 - minus - 2.0 which is correct except that 2.0 should be -2.0

  Read the article

• How can I access class variable inside a NSMutableArray object?

  - by ahmet732

  I have "Man" class which also has 2 variable : "description" and "name". At a point, I created Man class and initialize with its own variables (description and name) and pass it to NSMutableArray "collector". How can I access description now ? I tried but i could not get the property

  Read the article

• How can I make list or set translatable using gettext?

  - by Thomas

  I have some structure in Python: gender=( ('0','woman'), ('1','man') ) I want translate it before I will display it in Django template. Unfortunatelly below sollution don't work: from django.utils.translation import ugettext_lazy as _ gender=( ('0',('woman')), ('1',('man')) ) What I must do to translate this. I readed something in: link text but I can't understand what I should do.

  Read the article

• Why is used umask ?

  - by fabrizioM

  I am reading some source code and I found at the very begin of the main routine this statement: umask(077); What could be the reason for that? The man page (man 2 umask) states: umask -- set file creation mode mask This clearing allows each user to restrict the default access to his files But is not clear to me why would do that? as a shortcut ?

  Read the article

• FFmpeg extract clip - stream frame rate differs from container frame rate (x264, aac)

  - by fideli

  Summary H.264 video seems to have a really high frame rate that requires a scaling factor to the applied to the duration of video that I'm trying to extract (900x lower). Body I'm trying to extract a clip from a movie that I have in MP4 format (created using Handbrake). After trying mencoder and VLC, I decided to give FFmpeg a shot since it was the least troublesome when it came to copying the codecs. That is, compared to mencoder and VLC, the resulting file was still playable in QuickTime (I know about Perian, etc, I'm just trying to learn how all this works). Anyway, my command was as follows: ffmpeg -ss 01:15:51 -t 00:05:59 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 During the copy, The following comes up: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from outofsight.mp4': Duration: 01:57:42.10, start: 0.000000, bitrate: 830 kb/s Stream #0.0(und): Video: h264, yuv420p, 720x384, 25 tbr, 22500 tbn, 45k tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16 Output #0, mp4, to 'out.mp4': Stream #0.0(und): Video: libx264, yuv420p, 720x384, q=2-31, 90k tbn, 22500 tbc Stream #0.1(eng): Audio: libfaac, 48000 Hz, stereo, s16 Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 2591 fps=2349 q=-1.0 size= 8144kB time=101.60 bitrate= 656.7kbits/s … Instead of a 5:59 duration clip, I get the entire rest of the movie. So, to test this, I ran the ffmpeg command with -t 00:00:01. What I got was exactly a 15:00 minute clip. So I did some black box engineering and decided to scale my -t option by calculating what value to enter given that 1 second was interpreted as 900 s. For my desired 359 s clip, I calculated 0.399 s and so my ffmpeg command became: ffmpeg -ss 01:15.51 -t 00:00:00.399 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 This works, but I have no idea why the duration is scaled by 900. Investigating further, each ffmpeg run has the line: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) 45000/25 = 1800. Must be a relation somewhere. Somehow, the obscenely high frame rate is causing issues with the timing. How is that frame rate so high? The best part about this is that the resulting clip.mp4 has the exact same feature (due to the copied video codec), and taking further clips from this needs the same scaling for the -t duration option. Therefore, I've made it available for anyone willing to check this out. Appendix The preamble for ffmpeg on my system (built using MacPorts ffmpeg port): FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/opt/local --disable-vhook --enable-gpl --enable-postproc --enable-swscale --enable-avfilter --enable-avfilter-lavf --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libdirac --enable-libschroedinger --enable-libfaac --enable-libfaad --enable-libxvid --enable-libx264 --mandir=/opt/local/share/man --enable-shared --enable-pthreads --cc=/usr/bin/gcc-4.2 --arch=x86_64 libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 1. 4. 0 / 1. 4. 0 libswscale 1. 7. 1 / 1. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jan 4 2010 21:51:51, gcc: 4.2.1 (Apple Inc. build 5646) (dot 1)

  Read the article

• Automating video generation by adding an intro and a trailing video to the main video

  - by DevDewboy

  I have a video project I am trying to compile. Here is the overview: I have many videos which are 5 minute training sessions - Main video. The Intro Video will be a standard 5 second video that will have the Video title and Author. This will be concatenated to the main video. The Trailing Video will pretty much be a stock video that will be concatenated to the main video and have all the legaleze etc. The Intro Vid will smoothly fade into the main vid as well as when you get to end of the main video it will fade into the Trailing video nicely. The product is a new video with a Intro, Main & Trailer video all in one! The concept is really that simple. In fact I found an example of a person who has solved this and is doing exactly what I want. This solution is a Bash script that takes a config file that has the title, author, etc. and generates the Intro, the Ending and creates the resulting video with them concatenated. I am using Ubuntu 12.04 Server. I have been trying to take this as a sample and just running it with no luck because of incompatibility errors. I even attempted to convert it using .MP4 containers or .MKV. I am running into error after error or incompatibility issues. I went as far as changing out the ffmpeg binary using the 25 Oct 2013 version from http://ffmpeg.gusari.org/static/64bit/ which I like as I don't have to worry about rebuilding the binary. Almost successful but again I have some error which I cannot solve. I know part of the problem is the fact that video production, codecs, formats is a completely new field for me so I am attempting to work through this new territory. Perhaps an expert here has something similar that I can use as a guideline that uses MP4 or h.264 format. Or take the solution above from the URL and make it work with a more up-to-date version of ffmpeg. I will include the script and its parameter file and the output (abbreviated because of limitation) below. Basically as the script stands right now, when run I get the error [matroska,webm @ 0x27bbee0] Read error. This error is return from the 'reasembleVideo' routine from the first ffmpeg command. The following is the Parameter File: #!/bin/bash INPUTFILE="ssh_main.mp4" LOGO="logo.png" LOGOLENGTH="1" SPEAKER="Jason" TITLE="Basic SSH Video" DATE="October 28, 2013" SCENESTART="00:00:01" SCENEDURATION="00:00:09" OUTPUTFILE="ssh_basic_1" } The following is the script I am running. The ${OUTPUTFILE} being used is a small 2 minute video I create in screen-o-matic in MP4 format. Script on PasteBin (too long for Super User post)

  Read the article

• Rsync: how to mount truecrypt on-the-fly on the receiving side?

  - by deepc

  The short version: how can I keep an rsync backup on a truecrypt volume? The hard part is to mount/unmount this volume on the fly when it is needed for rsync. Details This is my current backup configuration (which works fairly well for the most part): backup source is on Win7 64 bit, destination is a remote Linux box (Debian) actual data transfer is done by rsync via ssh (cwRsync with cygwin) rsync daemon is started on demand via ssh On the Linux box the backup is protected by file permissions only. I want to increase security here and put the backup into a truecrypt volume. I can fuse-mount that volume manually in the shell. The question is now how can I make rsync not only open an ssh connection and starting the rsync daemon, but also to mount the truecrypt volume before (and unmount it after)? My money is on option --rsync-path which can be used to pass a command line to ssh - provided that stdin and stdout still work the same. I guess that command would have to be a shell script. Is this possible, and what would the script look like? For reference, here's a quote of that option: --rsync-path=PROGRAM Use this to specify what program is to be run on the remote machine to start-up rsync. Often used when rsync is not in the default remote-shell's path (e.g. --rsync-path=/usr/local/bin/rsync). Note that PROGRAM is run with the help of a shell, so it can be any program, script, or command sequence you'd care to run, so long as it does not corrupt the standard-in & standard-out that rsync is using to communicate. One tricky example is to set a different default directory on the remote machine for use with the --relative option. For instance: rsync -avR --rsync-path="cd /a/b && rsync" host:c/d /e/ This is the full rsync man page. Truecrypt volume auto-mount Solved! Turns out this option is actually key to auto-mounting the truecrypt volume on the remote side. The following command line does the trick (one line!): rsync $options -e "ssh -p $port -i ../.ssh/id_dsa" --rsync-path="/usr/local/bin/truecrypt -d && /usr/local/bin/truecrypt --fs-options=rw,sync,utf8,uid=$UID,umask=0007 --non-interactive -p $password $pathToVolume $remoteMountDir && rsync" $localSourceDir $user:$remoteMountMountDir Truecrypt volume auto-dismount Still open: how can I unmount the volume when rsync is done? Not sure if the following makes sense to anyone but I give it a try... Right now I am unmounting (truecrypt -d), then mounting again, then continuing with rsync. At this time rsync needs to do its thing but I dont know when its done. Adding ... rsync && truecrypt -d to the command line does not work because then the rsync daemon does not start. This is because rsync starts the daemon with parameter --server on the remote side and that parameter would go to the final truecrypt -d.

  Read the article

• Reality behind wireless security - the weakness of encrypting

  - by Cawas

  I welcome better key-wording here, both on tags and title, and I'll add more links as soon as possible. For some years I'm trying to conceive a wireless environment that I'd setup anywhere and advise for everyone, including from big enterprises to small home networks of 1 machine. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even considering hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what walling (building walls) is for the cables. And giving pass-phrases is adding a door with a key. But the cabling without encryption is also insecure. Someone just need to plugin and get your data! And while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. As I said elsewhere, I believe we should encrypt only sensitive data regardless of wires. And passwords should be added to the users, always, not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where people actually care on using passwords on their OS users, so let's go with that in mind. For being able to break the walls or the door someone will need proper equipment such as a hammer or a master key of some kind. Same is true for breaking the wireless walls in the analogy. But, I'd say true data security is at another place. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. And who doesn't want to be able to use internet freely anywhere you can find wifi spots? I have 3G myself, but that's beyond the point here. If I have a wifi at home I want to let people freely use it for internet as to not be an hypocrite and even guests can easily access my files, just for reading access, so I don't need to keep setting up encryption and pass-phrases that are not whole compatible. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think? Is there really a need for encryption to have true wireless security?

  Read the article

• FFmpeg extract clip - stream frame rate differs from container frame rate (x264, aac)

  - by fideli

  Summary H.264 video seems to have a really high frame rate that requires a scaling factor to the applied to the duration of video that I'm trying to extract (900x lower). Body I'm trying to extract a clip from a movie that I have in MP4 format (created using Handbrake). After trying mencoder and VLC, I decided to give FFmpeg a shot since it was the least troublesome when it came to copying the codecs. That is, compared to mencoder and VLC, the resulting file was still playable in QuickTime (I know about Perian, etc, I'm just trying to learn how all this works). Anyway, my command was as follows: ffmpeg -ss 01:15:51 -t 00:05:59 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 During the copy, The following comes up: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from outofsight.mp4': Duration: 01:57:42.10, start: 0.000000, bitrate: 830 kb/s Stream #0.0(und): Video: h264, yuv420p, 720x384, 25 tbr, 22500 tbn, 45k tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16 Output #0, mp4, to 'out.mp4': Stream #0.0(und): Video: libx264, yuv420p, 720x384, q=2-31, 90k tbn, 22500 tbc Stream #0.1(eng): Audio: libfaac, 48000 Hz, stereo, s16 Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 2591 fps=2349 q=-1.0 size= 8144kB time=101.60 bitrate= 656.7kbits/s … Instead of a 5:59 duration clip, I get the entire rest of the movie. So, to test this, I ran the ffmpeg command with -t 00:00:01. What I got was exactly a 15:00 minute clip. So I did some black box engineering and decided to scale my -t option by calculating what value to enter given that 1 second was interpreted as 900 s. For my desired 359 s clip, I calculated 0.399 s and so my ffmpeg command became: ffmpeg -ss 01:15.51 -t 00:00:00.399 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 This works, but I have no idea why the duration is scaled by 900. Investigating further, each ffmpeg run has the line: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) 45000/25 = 1800. Must be a relation somewhere. Somehow, the obscenely high frame rate is causing issues with the timing. How is that frame rate so high? The best part about this is that the resulting clip.mp4 has the exact same feature (due to the copied video codec), and taking further clips from this needs the same scaling for the -t duration option. Therefore, I've made it available for anyone willing to check this out. Appendix The preamble for ffmpeg on my system (built using MacPorts ffmpeg port): FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/opt/local --disable-vhook --enable-gpl --enable-postproc --enable-swscale --enable-avfilter --enable-avfilter-lavf --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libdirac --enable-libschroedinger --enable-libfaac --enable-libfaad --enable-libxvid --enable-libx264 --mandir=/opt/local/share/man --enable-shared --enable-pthreads --cc=/usr/bin/gcc-4.2 --arch=x86_64 libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 1. 4. 0 / 1. 4. 0 libswscale 1. 7. 1 / 1. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jan 4 2010 21:51:51, gcc: 4.2.1 (Apple Inc. build 5646) (dot 1) EDIT Not sure whether it was a bug or not, but it seems to be fixed now in my current version of ffmpeg, at least for this video (version 0.6.1 from MacPorts).

  Read the article

• Solaris ldap Authentication

  - by Tman

  Hi everyone Iv been having a trouble trying to get my Solaris 10 server to authenticate against an eDir server.im managed to Set up my linux(RHeL,SLES) servers to authenticate against the ldap Server.which works fine. Here is my configuration Files. ldapclient list: NS_LDAP_FILE_VERSION= 2.0 NS_LDAP_BINDDN= cn=proxyuser,o=AEDev NS_LDAP_BINDPASSWD= {NS1}ecfa88f3a945c22222233 NS_LDAP_SERVERS= 192.168.0.19 NS_LDAP_SEARCH_BASEDN= ou=auth,o=AEDev NS_LDAP_AUTH= simple NS_LDAP_SEARCH_SCOPE= sub NS_LDAP_CACHETTL= 0 NS_LDAP_CREDENTIAL_LEVEL= anonymous NS_LDAP_SERVICE_SEARCH_DESC= group:ou=Groups,ou=auth,o=AEDev NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=users,ou=auth,o=AEDev?sub?objectClass=shadowAccount NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=auth,o=AEDev?sub?objectClass=posixAccount NS_LDAP_BIND_TIME= 10 NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:simple getent passwd works fine: root:x:0:0:Super-User:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh svctag:x:95:12:Service Tag UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: tlla:x:2012:100::/home/tlla: test:x:2011:100::/home/test: thato:x:2010:100::/home/thato: pam.conf login auth sufficient pam_unix_auth.so.1 #server_policy login auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass login auth required pam_dial_auth.so.1 rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_authtok_get.so.1 rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth sufficient pam_unix_auth.so.1 rlogin auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 rsh auth sufficient pam_unix_auth.so.1 #server_policy rsh auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other auth requisite pam_authtok_get.so.1 other auth required pam_dhkeys.so.1 other auth required pam_unix_cred.so.1 other auth sufficient pam_unix_auth.so.1 other auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass passwd auth required pam_passwd_auth.so.1 passwd auth sufficient pam_unix_auth.so.1 ssh account sufficient pam_unix.so.1 ssh account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other account requisite pam_roles.so.1 other account sufficient pam_unix_account.so.1 other account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other password required pam_dhkeys.so.1 other password requisite pam_authtok_get.so.1 other password requisite pam_authtok_check.so.1 other password required pam_authtok_store.so.1 other password sufficient pam_unix.so.1 other password sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass Local Authentication Works But LDAP Authentication Doesn't Work.

  Read the article

• What is a good method to solve cabal install problems?

  - by sp3ctum

  I've used the cabal package manager for Haskell programs to install libraries and new projects that I've cloned from some repositories. More often than not, I keep running into problems. Most projects make installing them seem super easy, but in my case that's not always true - sometimes they are very hard to get running. Some are so hard, in fact, that I've lost interest in the project solely because of not being able to install it. So instead of complaining, I'd like to ask what I should do to better this situation. I'd like to use my most recent problem as an example. I'm interested in trying out the Gitit project. It's a promising looking personal wiki that runs on various version control systems. So here's what I've done: Clone from Github run cabal install in the project directory like I'm told on the project install page: mika@eka:~/git/gitit$ ls BLUETRIP-LICENSE CHANGES HCAR-gitit.tex LICENSE Network README.markdown RELANN-0.6.1 Setup.lhs TANGOICONS YUI-LICENSE data expireGititCache.hs gitit.cabal gitit.hs plugins mika@eka:~/git/gitit$ cabal install Resolving dependencies... cabal: cannot configure happstack-server-7.0.7. It requires base64-bytestring ==1.0.* For the dependency on base64-bytestring ==1.0.* there are these packages: base64-bytestring-1.0.0.0. However none of them are available. base64-bytestring-1.0.0.0 was excluded because gitit-0.10 requires base64-bytestring ==0.1.* mika@eka:~/git/gitit$ So now I'm thinking: well, I'll install happstack-server on its own, maybe that will work: mika@eka:~/git/gitit$ cabal install happstack-server Resolving dependencies... Warning: happstack-server.cabal: Ignoring unknown section type: test-suite Configuring happstack-server-7.0.7... cabal: At least the following dependencies are missing: blaze-html ==0.5.*, hslogger >=1.0.2, monad-control ==0.3.*, network >=2.2.3, sendfile >=0.7.1 && <0.8, system-filepath >=0.3.1, text >=0.10 && <0.12, threads >=0.5, transformers-base ==0.4.* cabal: Error: some packages failed to install: happstack-server-7.0.7 failed during the configure step. The exception was: ExitFailure 1 So looks like there are some dependencies missing. But isn't installing these dependencies the whole point of using cabal in the first place? What should I do? File bug reports (to which project?), install the dependencies manually or something else? Bonus points for explaining what causes these kinds of problems.

  Read the article

• Windows 7 remains powered on when restarting

  - by BombDefused

  I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

  Read the article

• Crash in audio resampler with some audio rates - FFMPEG PHP ( Solved! )

  - by Olaf Erlandsen

  i have a problem with this command( FFMPEG PHP ): Command: ffmpeg -i 62f76f050494f0ed6a5997967c00c0c0.wmv -ss 0 -t 99 -y -ar 44100 -async 44100 -r 29.970 -ac 2 -qscale 5 -f flv 62f76f050494f0ed6a5997967c00c0c0.flv Output: FFmpeg version 0.6.5, Copyright (c) 2000-2010 the FFmpeg developers built on Jan 29 2012 17:52:15 with gcc 4.4.5 20110214 (Red Hat 4.4.5-6) configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --disable-avisynth --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -fPIC' --enable-avfilter --enable-avfilter-lavf --enable-libdc1394 --enable-libdirac --enable-libfaac --enable-libfaad --enable-libfaadbin --enable-libgsm --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-vdpau --enable-version3 --enable-x11grab libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.19. 0 / 1.19. 0 libswscale 0.11. 0 / 0.11. 0 libpostproc 51. 2. 0 / 51. 2. 0 [asf @ 0xe81670]max_analyze_duration reached Input #0, asf, from '/var/www/resources/tmp/62f76f050494f0ed6a5997967c00c0c0.wmv': Metadata: WMFSDKVersion : 12.0.7601.17514 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:00:50.87, bitrate: 2467 kb/s Stream #0.0: Audio: wmapro, 44100 Hz, stereo, flt, 256 kb/s Stream #0.1: Video: vc1, yuv420p, 950x460 [PAR 1:1 DAR 95:46], 25 fps, 25 tbr, 1k tbn, 25 tbc Output #0, flv, to '/var/www/resources/media/62f76f050494f0ed6a5997967c00c0c0.flv': Metadata: encoder : Lavf52.64.2 Stream #0.0: Video: flv, yuv420p, 950x460 [PAR 1:1 DAR 95:46], q=2-31, 200 kb/s, 1k tbn, 29.97 tbc Stream #0.1: Audio: libmp3lame, 11025 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.1 -> #0.0 Stream #0.0 -> #0.1 Press [q] to stop encoding frame= 72 fps= 0 q=5.0 size= 0kB time=10.91 bitrate= 0.0kbits/s Multiple frames in a packet from stream 0 Warning, using s16 intermediate sample format for resampling frame= 141 fps=139 q=5.0 size= 103kB time=8.15 bitrate= 103.2kbits/s frame= 220 fps=144 q=5.0 size= 875kB time=10.92 bitrate= 656.6kbits/s frame= 290 fps=143 q=5.0 size= 1525kB time=13.74 bitrate= 909.1kbits/s frame= 356 fps=141 q=5.0 size= 2153kB time=15.99 bitrate=1103.1kbits/s frame= 427 fps=141 q=5.0 size= 2847kB time=18.70 bitrate=1247.0kbits/s frame= 497 fps=141 q=5.0 size= 3771kB time=21.16 bitrate=1460.0kbits/s frame= 575 fps=142 q=5.0 size= 4695kB time=24.61 bitrate=1563.0kbits/s frame= 639 fps=141 q=5.0 size= 5301kB time=26.80 bitrate=1620.2kbits/s frame= 703 fps=139 q=5.0 size= 5829kB time=29.36 bitrate=1626.2kbits/s frame= 774 fps=139 q=5.0 size= 6659kB time=32.39 bitrate=1684.0kbits/s frame= 842 fps=139 q=5.0 size= 7915kB time=35.27 bitrate=1838.6kbits/s frame= 911 fps=139 q=5.0 size= 9011kB time=37.98 bitrate=1943.4kbits/s frame= 975 fps=138 q=5.0 size= 9788kB time=40.59 bitrate=1975.3kbits/s frame= 1041 fps=138 q=5.0 size= 10904kB time=43.83 bitrate=2037.9kbits/s frame= 1115 fps=138 q=5.0 size= 11795kB time=46.24 bitrate=2089.8kbits/s frame= 1183 fps=138 q=5.0 size= 12678kB time=48.74 bitrate=2130.7kbits/s frame= 1247 fps=137 q=5.0 size= 13964kB time=51.36 bitrate=2227.5kbits/s frame= 1271 fps=136 q=5.0 Lsize= 15865kB time=58.86 bitrate=2208.1kbits/s video:15366kB audio:462kB global headers:0kB muxing overhead 0.238956% Problem: Warning, using s16 intermediate sample format for resampling I've also tried changing the parameter From -ar 44100 to -ar 11025 Thanks! Solution: Read this link: http://en.wikipedia.org/wiki/MP3#Bit_rate

  Read the article

• UFW as an active service on Ubuntu

  - by lamcro

  Every time I restart my computer, and check the status of the UFW firewall (sudo ufw status), it is disabled, even if I then enable and restart it. I tried putting sudo ufw enable as one of the startup applications but it asks for the sudo password every time I log on, and I'm guessing it does not protect anyone else who logs on my computer. How can I setup ufw so it is activated when I turn on my computer, and protects all accounts? Update I just tried /etc/init.d/ufw start, and it activated the firewall. Then I restarted the computer, and again it was disabled. content of /etc/ufw/ufw.conf # /etc/ufw/ufw.conf # # set to yes to start on boot ENABLED=yes # set to one of 'off', 'low', 'medium', 'high' LOGLEVEL=full content of /etc/default/ufw # /etc/default/ufw # # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback # accepted). You will need to 'disable' and then 'enable' the firewall for # the changes to take affect. IPV6=no # Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW inbound packets on the INPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_INPUT_POLICY="DROP" # Set the default output policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW outbound packets on the OUTPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_OUTPUT_POLICY="ACCEPT" # Set the default forward policy to ACCEPT, DROP or REJECT. Please note that # if you change this you will most likely want to adjust your rules DEFAULT_FORWARD_POLICY="DROP" # Set the default application policy to ACCEPT, DROP, REJECT or SKIP. Please # note that setting this to ACCEPT may be a security risk. See 'man ufw' for # details DEFAULT_APPLICATION_POLICY="SKIP" # By default, ufw only touches its own chains. Set this to 'yes' to have ufw # manage the built-in chains too. Warning: setting this to 'yes' will break # non-ufw managed firewall rules MANAGE_BUILTINS=no # # IPT backend # # only enable if using iptables backend IPT_SYSCTL=/etc/ufw/sysctl.conf # extra connection tracking modules to load IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_irc nf_nat_irc" Update Followed your advise and ran update-rc.d with no luck. lester@mcgrath-pc:~$ sudo update-rc.d ufw defaults update-rc.d: warning: /etc/init.d/ufw missing LSB information update-rc.d: see <http://wiki.debian.org/LSBInitScripts> Adding system startup for /etc/init.d/ufw ... /etc/rc0.d/K20ufw -> ../init.d/ufw /etc/rc1.d/K20ufw -> ../init.d/ufw /etc/rc6.d/K20ufw -> ../init.d/ufw /etc/rc2.d/S20ufw -> ../init.d/ufw /etc/rc3.d/S20ufw -> ../init.d/ufw /etc/rc4.d/S20ufw -> ../init.d/ufw /etc/rc5.d/S20ufw -> ../init.d/ufw lester@mcgrath-pc:~$ ls -l /etc/rc?.d/*ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc0.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc1.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc2.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc3.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc4.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc5.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc6.d/K20ufw -> ../init.d/ufw

  Read the article

• Can someone explain RAID-0 in plain English?

  - by Edward Tanguay

  I've heard about and read about RAID throughout the years and understand it theoretically as a way to help e.g. server PCs reduce the chance of data loss, but now I am buying a new PC which I want to be as fast as possible and have learned that having two drives can considerably increase the perceived performance of your machine. In the question Recommendations for hard drive performance boost, the author says he is going to RAID-0 two 7200 RPM drives together. What does this mean in practical terms for me with Windows 7 installed, e.g. can I buy two drives, go into the device manager and "raid-0 them together"? I am not a network administrator or a hardware guy, I'm just a developer who is going to have a computer store build me a super fast machine next week. I can read the wikipedia page on RAID but it is just way too many trees and not enough forest to help me build a faster PC: RAID-0: "Striped set without parity" or "Striping". Provides improved performance and additional storage but no redundancy or fault tolerance. Because there is no redundancy, this level is not actually a Redundant Array of Inexpensive Disks, i.e. not true RAID. However, because of the similarities to RAID (especially the need for a controller to distribute data across multiple disks), simple strip sets are normally referred to as RAID 0. Any disk failure destroys the array, which has greater consequences with more disks in the array (at a minimum, catastrophic data loss is twice as severe compared to single drives without RAID). A single disk failure destroys the entire array because when data is written to a RAID 0 drive, the data is broken into fragments. The number of fragments is dictated by the number of disks in the array. The fragments are written to their respective disks simultaneously on the same sector. This allows smaller sections of the entire chunk of data to be read off the drive in parallel, increasing bandwidth. RAID 0 does not implement error checking so any error is unrecoverable. More disks in the array means higher bandwidth, but greater risk of data loss. So in plain English, how can "RAID-0" help me build a faster Windows-7 PC that I am going to order next week?

  Read the article

• Remove DRM from *.pdb e-book that I own - while maintaining footnotes, etc.?

  - by ziesemer

  Background: I've already reviewed Remove DRM from ePub Files? and How can I remove DRM from Kindle books? - the answers to which have already brought me partial process. The challenge is that I have a few purchased *.pdb e-books that I purchased in years past, e.g. 2006. In particular, they were purchased from the palm eBook Store (ebooks.palm.com - now defunct, possibly part of http://www.ereader.com / Barnes & Noble?) - originally for use on a Palm Treo that has since died. Of particular note is that I have a revision / publication of a book that is no longer published, and not available as an e-book from anywhere else that I've been able to find. (I feel fortunate to have even found the *.pdb files on backup.) I have a copy of the electronic invoice for it - which includes the details necessary for unlocking - the "Purchaser's Name" and the "Unlock Code" - which is the digits of my credit card # that I had used to purchase it. Given the above information, I was surprised to be able to open the book using the Windows eReader software and unlock it. Here I am able to view the complete contents and functionality of the book as I had done on the Palm Treo - including viewing of linked annotations / footnotes, etc. Following the full spirit of Remove DRM from ePub Files?, I want to ensure that I can access this on any device of my choosing - especially now and in the future, and as new technologies arrive and disappear. Ideally, I'm just looking to accomplish the minimum necessary to allow import into calibre. Outstanding Issue: I've found a few solutions that have given me "90%" success - all based on various versions of some Python scripts - including versions 0.21 and 0.11 of "erdr2pml.py" (based on "ereader2html"). Unfortunately, unless I'm missing something, these programs are attempting to also "convert" - instead of just "decrypting". As such, the outputs are missing embedded images and/or footnotes. I.E., there is a linked, underlined, and super-scripted "a" after some text - but the content of the footnote no longer exists. I can validate this by inspecting the generated *.pmlz file, and nowhere does it contain the original footnotes that are still visible in the original *.pdb file. I'm hoping to find a process that focuses on the decryption only, instead of attempting any type of a content conversion - or if a content conversion is required / involved, that it maintains all of the features and content of the original. (Again, I'm confident that if/once a version is obtained that calibre can import, I'll be able to fulfill the rest of my requirements.)

  Read the article

• Configuring gmail for use on mailing lists

  - by reemrevnivek

  This is really two questions in one. First, are nettiquette guidelines still accurate in their restrictions on ASCII vs. HTML, posting style, and line length? (Here's a recent metafilter discussion of the topic.) Second, If they are not, should these guidelines be respected? If they are (or if they should still be respected), how can modern mail programs be configured to work properly with them? Most mailing list etiquette statements appear to have been written by sysadmins who loved their command lines, and refuse to change anything. Many still reference rfc1855, written in 1995. Just reading that paginated TXT should give you an idea of the climate at the time. Here's a short, fairly random list of mailing list etiquette statements with some extracted formatting guidelines: Mozilla - HTML discouraged, interleaved posting. FreeBSD - No HTML, don't top post, line length at 75 characters. Fedora - No HTML, bottom-post. You get the idea. You've all seen etiquette statements before. So, assuming that the rules should be obeyed (Usually a good idea), what can be done to allow me to still use a modern mail program, and exchange mail with friends who use the same programs? We like to format our mail. Bold headings, code snippets (sometimes syntax highlighted, if the copy-paste pulls RTF text as from XCOde and Eclipse), free line breaks determined by your browser width, and the (very) occasional image make the message easier to read. Threaded conversations are a wonderful thing. Broadband connections are, I'm sure, the rule for most of the users of SU and of developer mailing lists, disk space is cheap, and so the overhead of HTML is laughable. However, I don't want to post a question to a mailing list and have the guru who can answer my question automatically delete it, or come off as uncaring. Until I hear otherwise, I'll continue to respect the rules as best I can. For a common example of the problem, Gmail, by default, sends HTML formatted messages with bottom-posted quotes (which are folded in, just read the last message immediately above), and uses the frame width to wrap lines, rather than a character count. ASCII can be selected, and quotes can be moved and reversed, but line wraps of quotes don't work, line breaks are tedious to add (and more tedious to read, if they're super small in comparison to the width of the frame). Is there a forwarding, free mail program which can help with this exercise? Should an "RFC1855 mode" lab be written? Or do I have to go to the command line for my mailing lists, and gmail for my other mail?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >