Search Results

Search found 51388 results on 2056 pages for 'color name'.

Page 490/2056 | < Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >

  • How do I tell Websphere 7 about a front end load balancer so that re-directs are handled correctly?

    - by TiGz
    On WebLogic 11G I can use the console to set the FrontendHost and FrondendPort on a server or on a cluster so that re-directs are handled correctly and end up resolving to the front end load balancer instead of the local host. The MBeans associated with this on WebLogic are, for example: MBean Name com.bea:Name=AdminServer,Type=WebServer,Server=AdminServer Attribute Name FrontendHost Description The name of the host to which all redirected URLs will be sent. If specified, WebLogic Server will use this value rather than the one in the HOST header. Sets the HTTP frontendHost Provides a method to ensure that the webapp will always have the correct HOST information, even when the request is coming through a firewall or a proxy. If this parameter is configured, the HOST header will be ignored and the information in this parameter will be used in its place. Type java.lang.String Readable / Writable RW How is the same thing achieved under Websphere 7? Follow up info: So I have 2 use cases actually. One is that I have a web app running under WebSphere on host A on port 9002 and a LB running on host B at port 80, when I visit the home page of the app via the LB on http://hostb/app the app redirects my browser to http://hostb:9002/app and it 404's I think this is WebSphere's fault but I guess it could be the app's fault? The second is that the web app in question needs to send emails containing URls that the customer can click on to get back into the web app - obviously this needs to be via the LB. On WebLogic the app uses MBeans to derive the LB url and I was hoping to use a similar mechanism on WebSphere.

    Read the article

  • Microsoft Server 2003 Explorer shows duplicate local shares

    - by user52167
    Hi folks, I am new here and I could really use some advice please. I am having a problem with our file server. When I try to browse the shared folders using explorer, several of the shared folders all appear to have the same name. Whenever I attempt to rename one of the affected folders, all the affected folders name also change. Our File Server is Windows Server 2003 R2. I am logged on directly to the server using remote desktop. When I open the folder all is as it should be, the proper content is there and the address bar displays the correct folder name and path. The share names are correct, so everything that needs to access the shared folder/files can do so. Also when I browse to the folder using the command-line all it as it should be there too. The only issue seems to be the incorrect display name when browsing using explorer. Can anyone offer any advice or help as to how to resolve this issue please? It would be most appreciated. Thanks

    Read the article

  • What is the bash syntax to create a new directory in the directory above?

    - by mozerella
    I aim to make a script for mogrify. The mogrify command will resize images in a directory and put the resized images into a directory on the same directory level, with the same name as the work directory, but with a suffix (_a). The new directory will be moved to another collection later on. Something like this, #!/bin/bash mkdir ../n_a for file in *{.JPG|.jpg}; do mogrify -path ../n_a -resize 1200x1200 -quality 96;done I'm guessing ../ denotes the parent dir when working in a child directory, but I need help here. Edit: "n" needs to be replaced with the syntax for the working directory name. Sorry there was a typo as well third script line, should have read n not x Edit2: This script does exactly what I need and it's silent. #!/bin/bash DEST="../${PWD##*/}_a" mkdir -p $DEST mogrify -path $DEST -resize 1200x1200 -quality 96 *.jpg *.JPG thanks to vgoff for the correct PWD syntax and cesareriva http://www.cesareriva.com/archives/722 for showing me the DEST function. Something else: ${PWD##*/}_a is not caring for spaces in the directory name and the script fails. An empty dir is created in the same dir as the images. Found it out now, it needs quotations on the $DEST too, presumably to help mkdir create the dir with a space in the name, and mogrify to write the files to the right place, like this #!/bin/bash DEST="../${PWD##*/}_a" mkdir -p "$DEST" mogrify -path "$DEST" -resize 1200x1200 -quality 96 *.jpg *.JPG

    Read the article

  • Create new vms with a template with a csv. Possible?

    - by EdConde
    I am new to Powershell and Powercli... but i manager few ESX environments and really would like to do as much as possible via powershell. I am trying to do as much as i can via Powershell. On with the help I need: I used this one liner to create VMs from templates. But the problem is there has to be some user input after each new VM is created. New-VM name -Template template -VMHost VMHost -Datastore Datastore What i would like to do is be able to import via CSV the name of the new vm, the template to use, the host to put the new vm and the datastore all from a CSV. I don't know if it is as easy as below, but i kept getting errors. Import-Csv "C:\powershell\Data\VM2Create.csv" | Foreach-object{ New-VM $.name -Template $.template -VMHost $.VMHost -Datastore $.Datastore} I know there some () or {} or possibly | that need... just don't know where to put them... The csv i think would look like this: name, template, vmhost, datastore Any help or thoughts would be much appreciated...

    Read the article

  • Incorrect Internal DNS Resolution

    - by user167016
    I'm having a DNS issue. Server 2008 R2. The first clue was that after being off the network for a month, I could no longer Remote Desktop into my workstation by name, it wouldn't find it. Both via VPN and internally. But if I connect using its IP, that works. Now I notice in the server's Share and Storage Management, in Manage Sessions, it's displaying the incorrect computer name for some users. So I try, for one example: Ping -a 192.168.16.81 Pinging BOBS_COMPUTER.ourdomain.local [192.168.16.81] with 32 bytes of data: - replies all successful Then I try Ping RICHARDS_COMPUTER Pinging RICHARDS_COMPUTER.ourdomain.local [192.168.16.81] with 32 bytes of data: -all replies successful In DHCP, .81 belongs to RICHARDS_COMPUTER I did try flushdns. Not sure if this is related, apologies if it's not, but when I try to connect, I also get prompted: "The identity of the remote computer cannot be verified. Do you want to connect anyway? The remote computer could not be authenticated due to problems with its security certificate. It may be unsafe to proceed.." It then lists the correct name as the name in the certificate from the remote computer, but claims that the certificate is not from a trusted authority. Any thoughts are most appreciated!

    Read the article

  • Old network login passed to IIS

    - by 300 baud
    Let me start by saying that I am not a server guy - I am a developer. But I develop and manage an ASP.NET application that uses Windows authentication. I've run into the problem I am about to describe before, and I would just like to understand how to remedy it since I am the one who always gets the original support request. A user, let's call her JaneDoe, has just gotten married and her login has been changed to JaneJones. We have an application that uses Windows authentication to store the user's login name to a table and then redirects the user to another non-Windows authenticated site with a GUID which points to the table entry we just made. When the user reaches the second site, we read in the login name from the database using the GUID that was passed. Then, we look up the login name in another database where we track application permissions. The problem is that the user is logging into her workstation as JaneJones, but the Windows authenticated site is still receiving a login name of JaneDoe. Is this a domain controller issue? Is it a workstation issue? What's the best way to resolve this?

    Read the article

  • Adding a 2008 server to a 2003 Domain with DNS devolution?

    - by mvdwege
    I'm running into a problem adding a 2008 server to our existing 2003 domain, and as I am not a Windows admin, I'm not getting the problem here. Some reading around on Technet seems to indicate that DNS devolution is the issue. Here's the setup: DNS for the entire company is hosted on a Unix server running Bind, including the service records for the Windows domain. Our toplevel is company.local, and functional domains are in subdomains, such as mgt.company.local (our management servers). Our Windows servers live mostly in office.company.local, but some of them live in .mgt.company.local and .customers.company.local. The 2003 servers all succesfully authenticate against company.local as the Windows domain. Their position in the infrastructure is set by setting the primary DNS suffix under the network settings and the computer name dialog. Trying to do the same with a brand new 2008 install throws an error though: "Changing the Primary Domain DNS name of this computer to office.company.local failed [...] The specified server cannot perform the requested operation" I tried googling, but the closest I came was the Technet article on DNS Devolution, and I can't make heads nor tails on how to apply that to my case. Addendum 2012-10-23: The problem is not joining the domain, that works, the problem is that it joins with the wrong name, as .company.local, instead of .office.company.local. So far everything works, but I'm rather afraid to run production like this, because sooner or later something is going to complain about the AD name not matching DNS.

    Read the article

  • Android Actionbar Tabs + Fragments + Service

    - by Vladimir
    So, I have 3 problems with my code: 1) I want that each tab saves its state. So that a TextView shows changed text if it was changed. 2) if I go to Tab2 then to Tab1 I can't see the content of the fragments. Only if I touch on the already selected tab, it shows me the content 3) I can't correctly connect/bind and unbind service to Fragment Text must be changed from Service. Please help, I don't know how I realize my intent. MyActivity.java package com.example.tabs; import android.app.ActionBar; import android.app.ActionBar.Tab; import android.app.Activity; import android.app.ActivityManager; import android.app.ActivityManager.RunningServiceInfo; import android.app.Fragment; import android.app.FragmentTransaction; import android.content.ComponentName; import android.content.Context; import android.content.Intent; import android.content.ServiceConnection; import android.content.SharedPreferences; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; public class MyActivity extends Activity { private static String ACTION_BAR_INDEX = "ACTION_BAR_INDEX"; private Tab tTab1; private Tab tTab2; private static MyService.MyBinder myBinder; private static Intent myServiceIntent; private static MyService myService; private TabListener<Tab1> tab1Listener; private TabListener<Tab2> tab2Listener; private static ServiceConnection myConnection = new ServiceConnection() { public void onServiceConnected(ComponentName name, IBinder binder) { myBinder = (MyService.MyBinder) binder; myService = myBinder.getService(); myBinder.setCallbackHandler(myServiceHandler); } public void onServiceDisconnected(ComponentName name) { myService = null; myBinder = null; } }; /** Callbackhandler. */ private static Handler myServiceHandler = new Handler() { public void handleMessage(Message message) { super.handleMessage(message); Bundle bundle = message.getData(); if (bundle != null) { String text = bundle.getString("Text1", ""); if (!text.equals("")) { } } } }; protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); myServiceIntent = new Intent(this, MyService.class); bindService(myServiceIntent, myConnection, Context.BIND_AUTO_CREATE); if (!isServiceRunning()) { startService(myServiceIntent); } final ActionBar actionBar = getActionBar(); actionBar.setNavigationMode(ActionBar.NAVIGATION_MODE_TABS); actionBar.setDisplayShowTitleEnabled(false); tTab1 = actionBar.newTab(); tab1Listener = new TabListener<Tab1>(this, R.id.fl_main, Tab1.class); tTab1.setTag("Tab_1"); tTab1.setText("Tab_1"); tTab1.setTabListener(tab1Listener); tTab2 = actionBar.newTab(); tab2Listener = new TabListener<Tab2>(this, R.id.fl_main, Tab2.class); tTab2.setTag("Tab_2"); tTab2.setText("Tab_2"); tTab2.setTabListener(tab2Listener); actionBar.addTab(tTab1, 0); actionBar.addTab(tTab2, 1); } @Override public void onResume() { super.onResume(); SharedPreferences sp = getPreferences(Activity.MODE_PRIVATE); int actionBarIndex = sp.getInt(ACTION_BAR_INDEX, 0); getActionBar().setSelectedNavigationItem(actionBarIndex); } protected void onSaveInstanceState(Bundle outState) { // Save the current Action Bar tab selection int actionBarIndex = getActionBar().getSelectedTab().getPosition(); SharedPreferences.Editor editor = getPreferences(Activity.MODE_PRIVATE).edit(); editor.putInt(ACTION_BAR_INDEX, actionBarIndex); editor.apply(); // Detach each of the Fragments FragmentTransaction ft = getFragmentManager().beginTransaction(); if (tab2Listener.fragment != null) { ft.detach(tab2Listener.fragment); } if (tab1Listener.fragment != null) { ft.detach(tab1Listener.fragment); } ft.commit(); super.onSaveInstanceState(outState); } protected void onRestoreInstanceState(Bundle savedInstanceState) { // Find the recreated Fragments and assign them to their associated Tab // Listeners. tab1Listener.fragment = getFragmentManager().findFragmentByTag(Tab1.class.getName()); tab2Listener.fragment = getFragmentManager().findFragmentByTag(Tab2.class.getName()); // Restore the previous Action Bar tab selection. SharedPreferences sp = getPreferences(Activity.MODE_PRIVATE); int actionBarIndex = sp.getInt(ACTION_BAR_INDEX, 0); getActionBar().setSelectedNavigationItem(actionBarIndex); super.onRestoreInstanceState(savedInstanceState); } public boolean isServiceRunning() { ActivityManager manager = (ActivityManager) getSystemService(Context.ACTIVITY_SERVICE); for (RunningServiceInfo service : manager.getRunningServices(Integer.MAX_VALUE)) { if (MyService.class.getName().equals(service.service.getClassName())) { return true; } } return false; } @Override protected void onDestroy() { super.onDestroy(); unbindService(myConnection); stopService(myServiceIntent); } public static class TabListener<T extends Fragment> implements ActionBar.TabListener { private Fragment fragment; private Activity activity; private Class<T> fragmentClass; private int fragmentContainer; public TabListener(Activity activity, int fragmentContainer, Class<T> fragmentClass) { this.activity = activity; this.fragmentContainer = fragmentContainer; this.fragmentClass = fragmentClass; } public void onTabReselected(Tab tab, FragmentTransaction ft) { if (fragment != null) { ft.attach(fragment); } } public void onTabSelected(Tab tab, FragmentTransaction ft) { if (fragment == null) { String fragmentName = fragmentClass.getName(); fragment = Fragment.instantiate(activity, fragmentName); ft.add(fragmentContainer, fragment, fragmentName); } else { ft.detach(fragment); } } public void onTabUnselected(Tab tab, FragmentTransaction ft) { if (fragment != null) { ft.detach(fragment); } } } } MyService.java package com.example.tabs; import android.app.Service; import android.content.Intent; import android.os.Binder; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; public class MyService extends Service { private final IBinder myBinder = new MyBinder(); private static Handler myServiceHandler; public IBinder onBind(Intent intent) { return myBinder; } public int onStartCommand(Intent intent, int flags, int startId) { super.onStartCommand(intent, flags, startId); return START_STICKY; } public void sendMessage(String sText, int id) { Bundle bundle = new Bundle(); bundle.putString("Text" + id, sText); Message bundleMessage = new Message(); bundleMessage.setData(bundle); myServiceHandler.sendMessage(bundleMessage); } public class MyBinder extends Binder { public MyService getService() { return MyService.this; } public void setCallbackHandler(Handler myActivityHandler) { myServiceHandler = myActivityHandler; } public void removeCallbackHandler() { myServiceHandler = null; } } } Tab1.java package com.example.tabs; import android.app.Activity; import android.app.Fragment; import android.content.ComponentName; import android.content.Context; import android.content.Intent; import android.content.ServiceConnection; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; import android.view.LayoutInflater; import android.view.View; import android.view.View.OnClickListener; import android.view.ViewGroup; import android.widget.Button; import android.widget.EditText; import android.widget.TextView; public class Tab1 extends Fragment { public static String TAG = Tab1.class.getClass().getSimpleName(); private static TextView tvText; private EditText editText; private static MyService.MyBinder myBinder; private static Intent myServiceIntent; private static MyService myService; private static ServiceConnection myConnection = new ServiceConnection() { public void onServiceConnected(ComponentName name, IBinder binder) { myBinder = (MyService.MyBinder) binder; myService = myBinder.getService(); myBinder.setCallbackHandler(myServiceHandler); } public void onServiceDisconnected(ComponentName name) { myService = null; myBinder = null; } }; /** Callbackhandler. */ private static Handler myServiceHandler = new Handler() { public void handleMessage(Message message) { super.handleMessage(message); Bundle bundle = message.getData(); if (bundle != null) { String text = bundle.getString("Text1", ""); if (!text.equals("")) { tvText.setText(text); } } } }; public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { View view = inflater.inflate(R.layout.tab1, container, false); tvText = (TextView) view.findViewById(R.id.tv_tab1); editText = (EditText) view.findViewById(R.id.editText1); Button btn1 = (Button) view.findViewById(R.id.btn_change_text_1); btn1.setOnClickListener(new OnClickListener() { public void onClick(View v) { myService.sendMessage(String.valueOf(editText.getText()), 1); } }); return view; } @Override public void onAttach(Activity activity) { super.onAttach(activity); myServiceIntent = new Intent(activity, MyService.class); activity.bindService(myServiceIntent, myConnection, Context.BIND_AUTO_CREATE); } @Override public void onDetach() { super.onDetach(); getActivity().unbindService(myConnection); } } Tab2.java package com.example.tabs; import android.app.Activity; import android.app.Fragment; import android.content.ComponentName; import android.content.Context; import android.content.Intent; import android.content.ServiceConnection; import android.os.Bundle; import android.os.Handler; import android.os.IBinder; import android.os.Message; import android.util.Log; import android.view.LayoutInflater; import android.view.View; import android.view.View.OnClickListener; import android.view.ViewGroup; import android.widget.Button; import android.widget.EditText; import android.widget.TextView; public class Tab2 extends Fragment { public static String TAG = Tab2.class.getClass().getSimpleName(); private static TextView tvText; private EditText editText; private static MyService.MyBinder myBinder; private static Intent myServiceIntent; private static MyService myService; private static ServiceConnection myConnection = new ServiceConnection() { public void onServiceConnected(ComponentName name, IBinder binder) { myBinder = (MyService.MyBinder) binder; myService = myBinder.getService(); myBinder.setCallbackHandler(myServiceHandler); } public void onServiceDisconnected(ComponentName name) { myService = null; myBinder = null; } }; /** Callbackhandler. */ private static Handler myServiceHandler = new Handler() { public void handleMessage(Message message) { super.handleMessage(message); Bundle bundle = message.getData(); if (bundle != null) { String text = bundle.getString("Text1", ""); if (!text.equals("")) { tvText.setText(text); } } } }; public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { View view = inflater.inflate(R.layout.tab2, container, false); tvText = (TextView) view.findViewById(R.id.tv_tab2); editText = (EditText) view.findViewById(R.id.editText2); Button btn2 = (Button) view.findViewById(R.id.btn_change_text_2); btn2.setOnClickListener(new OnClickListener() { public void onClick(View v) { myService.sendMessage(String.valueOf(editText.getText()), 2); } }); return view; } @Override public void onAttach(Activity activity) { super.onAttach(activity); myServiceIntent = new Intent(activity, MyService.class); activity.bindService(myServiceIntent, myConnection, Context.BIND_AUTO_CREATE); } @Override public void onDetach() { super.onDetach(); getActivity().unbindService(myConnection); } } main.xml <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:id="@+id/main" android:layout_width="match_parent" android:layout_height="match_parent" android:background="@android:color/black" android:orientation="vertical" > </LinearLayout> tab1.xml <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" android:layout_gravity="center" android:gravity="center" android:orientation="vertical" > <EditText android:id="@+id/editText1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:ems="10" android:inputType="text" > <requestFocus /> </EditText> <Button android:id="@+id/btn_change_text_1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:text="Change text" /> <TextView android:id="@+id/tv_tab1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="TAB1\nTAB1\nTAB1" /> </LinearLayout> tab2.xml <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" android:layout_gravity="center" android:gravity="center" android:orientation="vertical" > <EditText android:id="@+id/editText2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:ems="10" android:inputType="text" > <requestFocus /> </EditText> <Button android:id="@+id/btn_change_text_2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:text="Change text" /> <TextView android:id="@+id/tv_tab2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:text="TAB2\nTAB2\nTAB2" /> </LinearLayout> AndroidManifest.xml <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.example.tabs" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="15" android:targetSdkVersion="17" /> <application android:allowBackup="true" android:icon="@drawable/ic_launcher" android:label="TabsPlusService" android:theme="@android:style/Theme.Holo" > <activity android:name="com.example.tabs.MyActivity" android:configChanges="orientation|keyboardHidden|screenSize" android:label="TabsPlusService" android:theme="@android:style/Theme.Holo" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <service android:name=".MyService" android:enabled="true" > </service> </application> </manifest>

    Read the article

  • Asp.NET custom templated datalist throws argument out of range (index) on button press

    - by MrTortoise
    I have a class BaseTemplate public abstract class BaseTemplate : ITemplate This adds the controls, and provides abstract methods to implement in the inheriting class. The inheriting class then adds its html according to its data source and manages the data binding. This all works fine - I get the control appearing with properly parsed html. The problem is that the base class adds controls into the template that have their own CommandName arguments; the idea is that the class that implements the custom templated dataList will provide the logic of setting the Selected and Edit Indexes. This class also manages the data binding, etc. It sets all of the templates on the datalist in the Init method (which was another cause of this exception). The exception gets thrown when I hit one of these buttons - I have tried hooking up both their click and command events everywhere in case this was the problem. I have also ensured that their command names do not match any of the system ones. The stack trace does not include any references to my methods or objects which is why I am so stuck. It is the most unhelpful message I can imagine. The really frustrating thing is that I cannot get a breakpoint to fire - i.e. the problem is happening after I click the button, but before and of my code can execute. The last time this exception happened was when I had this code in a user control and was assigning the templates to the datalist in the PageLoad. I moved these into init to fix that problem; however, this is a problem that was there then and I have no idea what is causing it let alone how to solve it (and index out of range doesn't really help without knowing what index.) The Exception Details Exception Details: System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: index The Stack Trace: [ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: index] System.Web.UI.ControlCollection.get_Item(Int32 index) +8665582 System.Web.UI.WebControls.DataList.GetItem(ListItemType itemType, Int32 repeatIndex) +8667655 System.Web.UI.WebControls.DataList.System.Web.UI.WebControls.IRepeatInfoUser.GetItemStyle(ListItemType itemType, Int32 repeatIndex) +11 System.Web.UI.WebControls.RepeatInfo.RenderVerticalRepeater(HtmlTextWriter writer, IRepeatInfoUser user, Style controlStyle, WebControl baseControl) +8640873 System.Web.UI.WebControls.RepeatInfo.RenderRepeater(HtmlTextWriter writer, IRepeatInfoUser user, Style controlStyle, WebControl baseControl) +27 System.Web.UI.WebControls.DataList.RenderContents(HtmlTextWriter writer) +208 System.Web.UI.WebControls.BaseDataList.Render(HtmlTextWriter writer) +30 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99 System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134 System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19 System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +163 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +32 System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +51 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99 System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +40 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134 System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19 System.Web.UI.Page.Render(HtmlTextWriter writer) +29 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99 System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1266 The code Base class: public abstract class BaseTemplate : ITemplate { ListItemType _templateType; public BaseTemplate(ListItemType theTemplateType) { _templateType = theTemplateType; } public ListItemType ListItemType { get { return _templateType; } } #region ITemplate Members public void InstantiateIn(Control container) { PlaceHolder ph = new PlaceHolder(); container.Controls.Add(ph); Literal l = new Literal(); switch (_templateType) { case ListItemType.Header: { ph.Controls.Add(new LiteralControl(@"<table><tr>")); InstantiateInHeader(ph); ph.Controls.Add(new LiteralControl(@"</tr>")); break; } case ListItemType.Footer: { ph.Controls.Add(new LiteralControl(@"<tr>")); InstantiateInFooter(ph); ph.Controls.Add(new LiteralControl(@"</tr></table>")); break; } case ListItemType.Item: { ph.Controls.Add(new LiteralControl(@"<tr>")); InstantiateInItem(ph); ph.Controls.Add(new LiteralControl(@"<td>")); Button select = new Button(); select.ID = "btnSelect"; select.CommandName = "SelectRow"; select.Text = "Select"; ph.Controls.Add(select); ph.Controls.Add(new LiteralControl(@"</td>")); ph.Controls.Add(new LiteralControl(@"</tr>")); ph.DataBinding += new EventHandler(ph_DataBinding); break; } case ListItemType.AlternatingItem: { ph.Controls.Add(new LiteralControl(@"<tr>")); InstantiateInAlternatingItem(ph); ph.Controls.Add(new LiteralControl(@"<td>")); Button select = new Button(); select.ID = "btnSelect"; select.CommandName = "SelectRow"; select.Text = "Select"; ph.Controls.Add(select); ph.Controls.Add(new LiteralControl(@"</td>")); ph.Controls.Add(new LiteralControl(@"</tr>")); ph.DataBinding+=new EventHandler(ph_DataBinding); break; } case ListItemType.SelectedItem: { ph.Controls.Add(new LiteralControl(@"<tr>")); InstantiateInItem(ph); ph.Controls.Add(new LiteralControl(@"<td>")); Button edit = new Button(); edit.ID = "btnEdit"; edit.CommandName = "EditRow"; edit.Text = "Edit"; ph.Controls.Add(edit); Button delete = new Button(); delete.ID = "btnDelete"; delete.CommandName = "DeleteRow"; delete.Text = "Delete"; ph.Controls.Add(delete); ph.Controls.Add(new LiteralControl(@"</td>")); ph.Controls.Add(new LiteralControl(@"</tr>")); ph.DataBinding += new EventHandler(ph_DataBinding); break; } case ListItemType.EditItem: { ph.Controls.Add(new LiteralControl(@"<tr>")); InstantiateInEdit(ph); ph.Controls.Add(new LiteralControl(@"<td>")); Button save = new Button(); save.ID = "btnSave"; save.CommandName = "SaveRow"; save.Text = "Save"; ph.Controls.Add(save); Button cancel = new Button(); cancel.ID = "btnCancel"; cancel.CommandName = "CancelRow"; cancel.Text = "Cancel"; ph.Controls.Add(cancel); ph.Controls.Add(new LiteralControl(@"</td>")); ph.Controls.Add(new LiteralControl(@"</tr>")); ph.DataBinding += new EventHandler(ph_DataBinding); break; } case ListItemType.Separator: { InstantiateInSeperator(ph); break; } } } void ph_DataBinding(object sender, EventArgs e) { DataBindingOverride(sender, e); } /// <summary> /// the controls placed into the PlaceHolder will get wrapped in &lt;table&gt;&lt;tr&gt; &lt;/tr&gt;. I.e. you need to provide the column names wrapped in &lt;td&gt;&lt;/td&gt; tags. /// </summary> /// <param name="header"></param> public abstract void InstantiateInHeader(PlaceHolder ph); /// <summary> /// the controls will have a column added after them and so require each column to be properly wrapped in &lt;td&gt;&lt;/td&gt; tags. The &lt;tr&gt;&lt;/tr&gt; is handled in the base class. /// </summary> /// <param name="ph"></param> public abstract void InstantiateInItem(PlaceHolder ph); /// <summary> /// the controls will have a column added after them and so require each column to be properly wrapped in &lt;td&gt;&lt;/td&gt; tags. The &lt;tr&gt;&lt;/tr&gt; is handled in the base class. /// </summary> /// <param name="ph"></param> public abstract void InstantiateInAlternatingItem(PlaceHolder ph); /// <summary> /// the controls will have a column added after them and so require each column to be properly wrapped in &lt;td&gt;&lt;/td&gt; tags. The &lt;tr&gt;&lt;/tr&gt; is handled in the base class. /// </summary> /// <param name="ph"></param> public abstract void InstantiateInEdit(PlaceHolder ph); /// <summary> /// Any html used in the footer will have &lt;/tr&gt;&lt;table&gt; appended to the end. /// &lt;tr&gt; will be appended to the front. /// </summary> /// <param name="ph"></param> public abstract void InstantiateInFooter(PlaceHolder ph); /// <summary> /// the controls will have a column added after them and so require each column to be properly wrapped in &lt;td&gt;&lt;/td&gt; tags. The &lt;tr&gt;&lt;/tr&gt; is handled in the base class. /// Adds Delete and Edit Buttons after the table contents. /// </summary> /// <param name="ph"></param> public abstract void InstantiateInSelectedItem(PlaceHolder ph); /// <summary> /// The base class provides no &lt;tr&gt;&lt;/tr&gt; tags /// </summary> /// <param name="ph"></param> public abstract void InstantiateInSeperator(PlaceHolder ph); /// <summary> /// Use this method to bind the controls to their data. /// </summary> /// <param name="sender"></param> /// <param name="e"></param> public abstract void DataBindingOverride(object sender, EventArgs e); #endregion } Inheriting class: public class NominalGroupTemplate : BaseTemplate { public NominalGroupTemplate(ListItemType theListItemType) : base(theListItemType) { } public override void InstantiateInHeader(PlaceHolder ph) { ph.Controls.Add(new LiteralControl(@"<td>ID</td><td>Group</td><td>IsPositive</td>")); } public override void InstantiateInItem(PlaceHolder ph) { ph.Controls.Add(new LiteralControl(@"<td>")); Label lblID = new Label(); lblID.ID = "lblID"; ph.Controls.Add(lblID); ph.Controls.Add(new LiteralControl(@"</td><td>")); Label lblGroup = new Label(); lblGroup.ID = "lblGroup"; ph.Controls.Add(lblGroup); ph.Controls.Add(new LiteralControl(@"</td><td>")); CheckBox chkIsPositive = new CheckBox(); chkIsPositive.ID = "chkIsPositive"; chkIsPositive.Enabled = false; ph.Controls.Add(chkIsPositive); ph.Controls.Add(new LiteralControl(@"</td>")); } public override void InstantiateInAlternatingItem(PlaceHolder ph) { InstantiateInItem(ph); } public override void InstantiateInEdit(PlaceHolder ph) { ph.Controls.Add(new LiteralControl(@"<td>")); Label lblID = new Label(); lblID.ID = "lblID"; ph.Controls.Add(lblID); ph.Controls.Add(new LiteralControl(@"</td><td>")); TextBox txtGroup = new TextBox(); txtGroup.ID = "txtGroup"; txtGroup.Visible = true; txtGroup.Enabled = true ; ph.Controls.Add(txtGroup); ph.Controls.Add(new LiteralControl(@"</td><td>")); CheckBox chkIsPositive = new CheckBox(); chkIsPositive.ID = "chkIsPositive"; chkIsPositive.Visible = true; chkIsPositive.Enabled = true ; ph.Controls.Add(chkIsPositive); ph.Controls.Add(new LiteralControl(@"</td>")); } public override void InstantiateInFooter(PlaceHolder ph) { InstantiateInHeader(ph); } public override void InstantiateInSelectedItem(PlaceHolder ph) { ph.Controls.Add(new LiteralControl(@"<td>")); Label lblID = new Label(); lblID.ID = "lblID"; ph.Controls.Add(lblID); ph.Controls.Add(new LiteralControl(@"</td><td>")); TextBox txtGroup = new TextBox(); txtGroup.ID = "txtGroup"; txtGroup.Visible = true; txtGroup.Enabled = false; ph.Controls.Add(txtGroup); ph.Controls.Add(new LiteralControl(@"</td><td>")); CheckBox chkIsPositive = new CheckBox(); chkIsPositive.ID = "chkIsPositive"; chkIsPositive.Visible = true; chkIsPositive.Enabled = false; ph.Controls.Add(chkIsPositive); ph.Controls.Add(new LiteralControl(@"</td>")); } public override void InstantiateInSeperator(PlaceHolder ph) { } public override void DataBindingOverride(object sender, EventArgs e) { PlaceHolder ph = (PlaceHolder)sender; DataListItem li = (DataListItem)ph.NamingContainer; int id = Convert.ToInt32(DataBinder.Eval(li.DataItem, "ID")); string group = (string)DataBinder.Eval(li.DataItem, "Group"); bool isPositive = Convert.ToBoolean(DataBinder.Eval(li.DataItem, "IsPositive")); switch (this.ListItemType) { case ListItemType.Item: case ListItemType.AlternatingItem: { ((Label)ph.FindControl("lblID")).Text = id.ToString(); ((Label)ph.FindControl("lblGroup")).Text = group; ((CheckBox)ph.FindControl("chkIsPositive")).Text = isPositive.ToString(); break; } case ListItemType.EditItem: case ListItemType.SelectedItem: { ((TextBox)ph.FindControl("lblID")).Text = id.ToString(); ((TextBox)ph.FindControl("txtGroup")).Text = group; ((CheckBox)ph.FindControl("chkIsPositive")).Text = isPositive.ToString(); break; } } } } From here I added the control to a page the code behind public partial class NominalGroupbroke : System.Web.UI.UserControl { public void SetNominalGroupList(IList<BONominalGroup> theNominalGroups) { XElement data = Serialiser<BONominalGroup>.SerialiseObjectList(theNominalGroups); ViewState.Add("nominalGroups", data.ToString()); dlNominalGroup.DataSource = theNominalGroups; dlNominalGroup.DataBind(); } protected void Page_init() { dlNominalGroup.HeaderTemplate = new NominalGroupTemplate(ListItemType.Header); dlNominalGroup.ItemTemplate = new NominalGroupTemplate(ListItemType.Item); dlNominalGroup.AlternatingItemTemplate = new NominalGroupTemplate(ListItemType.AlternatingItem); dlNominalGroup.SeparatorTemplate = new NominalGroupTemplate(ListItemType.Separator); dlNominalGroup.SelectedItemTemplate = new NominalGroupTemplate(ListItemType.SelectedItem); dlNominalGroup.EditItemTemplate = new NominalGroupTemplate(ListItemType.EditItem); dlNominalGroup.FooterTemplate = new NominalGroupTemplate(ListItemType.Footer); } protected void Page_Load(object sender, EventArgs e) { dlNominalGroup.ItemCommand += new DataListCommandEventHandler(dlNominalGroup_ItemCommand); } void dlNominalGroup_Init(object sender, EventArgs e) { dlNominalGroup.HeaderTemplate = new NominalGroupTemplate(ListItemType.Header); dlNominalGroup.ItemTemplate = new NominalGroupTemplate(ListItemType.Item); dlNominalGroup.AlternatingItemTemplate = new NominalGroupTemplate(ListItemType.AlternatingItem); dlNominalGroup.SeparatorTemplate = new NominalGroupTemplate(ListItemType.Separator); dlNominalGroup.SelectedItemTemplate = new NominalGroupTemplate(ListItemType.SelectedItem); dlNominalGroup.EditItemTemplate = new NominalGroupTemplate(ListItemType.EditItem); dlNominalGroup.FooterTemplate = new NominalGroupTemplate(ListItemType.Footer); } void dlNominalGroup_DataBinding(object sender, EventArgs e) { } void deleteNominalGroup(int index) { XElement data = XElement.Parse(Convert.ToString( ViewState["nominalGroups"] )); IList<BONominalGroup> list = Serialiser<BONominalGroup>.DeserialiseObjectList(data); FENominalGroup.DeleteNominalGroup(list[index].ID); list.RemoveAt(index); data = Serialiser<BONominalGroup>.SerialiseObjectList(list); ViewState["nominalGroups"] = data.ToString(); dlNominalGroup.DataSource = list; dlNominalGroup.DataBind(); } void updateNominalGroup(DataListItem theItem) { XElement data = XElement.Parse(Convert.ToString( ViewState["nominalGroups"])); IList<BONominalGroup> list = Serialiser<BONominalGroup>.DeserialiseObjectList(data); BONominalGroup old = list[theItem.ItemIndex]; BONominalGroup n = new BONominalGroup(); byte id = Convert.ToByte(((TextBox)theItem.FindControl("lblID")).Text); string group = ((TextBox)theItem.FindControl("txtGroup")).Text; bool isPositive = Convert.ToBoolean(((CheckBox)theItem.FindControl("chkIsPositive")).Text); n.ID = id; n.Group = group; n.IsPositive = isPositive; FENominalGroup.UpdateNominalGroup(old, n); list[theItem.ItemIndex] = n; data = Serialiser<BONominalGroup>.SerialiseObjectList(list); ViewState["nominalGroups"] = data.ToString(); } void dlNominalGroup_ItemCommand(object source, DataListCommandEventArgs e) { DataList l = (DataList)source; switch (e.CommandName) { case "SelectRow": { if (l.EditItemIndex == -1) { l.SelectedIndex = e.Item.ItemIndex; l.EditItemIndex = -1; } break; } case "EditRow": { if (l.SelectedIndex == e.Item.ItemIndex) { l.EditItemIndex = e.Item.ItemIndex; } break; } case "DeleteRow": { deleteNominalGroup(e.Item.ItemIndex); l.EditItemIndex = -1; try { l.SelectedIndex = e.Item.ItemIndex; } catch { l.SelectedIndex = -1; } break; } case "CancelRow": { l.SelectedIndex = l.EditItemIndex; l.EditItemIndex = -1; break; } case "SaveRow": { updateNominalGroup(e.Item); try { l.SelectedIndex = e.Item.ItemIndex; } catch { l.SelectedIndex = -1; } l.EditItemIndex = -1; break; } } } Lots of code there, I'm afraid, but it should build. Thanks if anyone manages to spot my silliness. The BONominalGroup class (please ignore my crazy getHash override, I'm not proud of it). IAudit can just be an empty interface here and all will be fine. It used to inherit from another class, I have cleaned that out - so the serialization logic may be broken here. public class BONominalGroup { public BONominalGroup() #region Fields and properties private Int16 _ID; public Int16 ID { get { return _ID; } set { _ID = value; } } private string _group; public string Group { get { return _group; } set { _group = value; } } private bool _isPositve; public bool IsPositive { get { return _isPositve; } set { _isPositve = value; } } #endregion public override bool Equals(object obj) { bool retVal = false; BONominalGroup ng = obj as BONominalGroup; if (ng!=null) if (ng._group == this._group && ng._ID == this.ID && ng.IsPositive == this.IsPositive) { retVal = true; } return retVal; } public override int GetHashCode() { return ToString().GetHashCode(); } public override string ToString() { return "BONominalGroup{ID:" + this.ID.ToString() + ",Group:" + this.Group.ToString() + ",IsPositive:" + this.IsPositive.ToString() + "," + "}"; } #region IXmlSerializable Members public override void ReadXml(XmlReader reader) { reader.ReadStartElement("BONominalGroup"); this.ID = Convert.ToByte(reader.ReadElementString("id")); this.Group = reader.ReadElementString("group"); this.IsPositive = Convert.ToBoolean(reader.ReadElementString("isPositive")); base.ReadXml(reader); reader.ReadEndElement(); } public override void WriteXml(XmlWriter writer) { writer.WriteElementString("id", this.ID.ToString()); writer.WriteElementString("group", this.Group); writer.WriteElementString("isPositive", this.IsPositive.ToString()); // writer.WriteStartElement("BOBase"); // base.WriteXml(writer); writer.WriteEndElement(); } #endregion }

    Read the article

  • SOA Suite 11g Native Format Builder Complex Format Example

    - by bob.webster
    This rather long posting details the steps required to process a grouping of fixed length records using Format Builder.   If it’s 10 pm and you’re feeling beat you might want to leave this until tomorrow.  But if it’s 10 pm and you need to get a Format Builder Complex template done, read on… The goal is to process individual orders from a file using the 11g File Adapter and Format Builder Sample Data =========== 001Square Widget            0245.98 102Triagular Widget         1120.00 403Circular Widget           0099.45 ORD8898302/01/2011 301Hexagon Widget         1150.98 ORD6735502/01/2011 The records are fixed length records representing a number of logical Order records. Each order record consists of a number of item records starting with a 3 digit number, followed by a single Summary Record which starts with the constant ORD. How can this file be processed so that the first poll returns the first order? 001Square Widget            0245.98 102Triagular Widget         1120.00 403Circular Widget           0099.45 ORD8898302/01/2011 And the second poll returns the second order? 301Hexagon Widget           1150.98 ORD6735502/01/2011 Note: if you need more than one order per poll, that’s also possible, see the “Multiple Messages” field in the “File Adapter Step 6 of 9” snapshot further down.   To follow along with this example you will need - Studio Edition Version 11.1.1.4.0    with the   - SOA Extension for JDeveloper 11.1.1.4.0 installed Both can be downloaded from here:  http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html You will not need a running WebLogic Server domain to complete the steps and Format Builder tests in this article.     Start with a SOA Composite containing a File Adapter The Format Builder is part of the File Adapter so start by creating a new SOA Project and Composite. Here is a quick summary for those not familiar with these steps - Start JDeveloper - From the Main Menu choose File->New - In the New Gallery window that opens Expand the “General” category and Select the Applications node.   Then choose SOA Application from the Items section on the right.  Finally press the OK button. - In Step 1 of the “Create SOA Application wizard” that appears enter an Application Name and an Directory of your     choice,   then press the Next button. - In Step 2 of the “Create SOA Application wizard”, press the Next button leaving all entries as defaulted. - In Step 3 of the “Create SOA Application wizard”, Enter a composite name of your choice and Press the Finish   Button These steps result in a new Application and SOA Project. The SOA Project contains a composite.xml file which is opened and shown below. For our example we have not defined a Mediator or a BPEL process to minimize the steps, but one or the other would eventually be needed to use the File Adapter we are about to create. Drag and drop the File Adapter icon from the Component Pallette onto either the LEFT side of the diagram under “Exposed Services” or the right side under “External References”.  (See the Green Circle in the image below).  Placing the adapter on the left side would indicate the file being processed is inbound to the composite, if the adapter is placed on the right side then the data is outbound to a file.     Note that the same Format Builder definition can be used in both directions.  For example we could use the format with a File Adapter on the left side of the composite to parse fixed data into XML, modify the data in our Composite or BPEL process and then use the same Format Builder definition with a File adapter on the right side of the composite to write the data back out in the same fixed data format When the File Adapter is dropped on the Composite the File Adapter Wizard Appears. Skip Past the first page, Step 1 of 9 by pressing the Next button. In Step 2 enter a service name of your choice as shown below, then press Next   When the Native Format Builder appears, skip the welcome page by pressing next. Also press the Next button to accept the settings on Step 3 of 9 On Step 4, select Read File and press the Next button as shown below.   On Step 5 enter a directory that will contain a file with the input data, then  Press the Next button as shown below. In step 6, enter *.txt or another file format to select input files from the input directory mentioned in step 5. ALSO check the “Files contain Multiple Messages” checkbox and set the “Publish Messages in Batches of” field to 1.  The value can be set higher to increase the number of logical order group records returned on each poll of the file adapter.  In other words, it determines the number of Orders that will be sent to each instance of a Mediator or Composite processing using the File Adapter.   Skip Step 7 by pressing the Next button In Step 8 press the Gear Icon on the right side to load the Native Format Builder.       Native Format Builder  appears Before diving into the format, here is an overview of the process. Approach - Bottom up Assuming an Order is a grouping of item records and a summary record…. - Define a separate  Complex Type for each Record Type found in the group.    (One for itemRecord and one for summaryRecord) - Define a Complex Type to contain the Group of Record types defined above   (LogicalOrderRecord) - Define a top level element to represent an order.  (order)   The order element will be of type LogicalOrderRecord   Defining the Format In Step 1 select   “Create new”  and  “Complex Type” and “Next”   In Step two browse to and select a file containing the test data shown at the start of this article. A link is provided at the end of this article to download a file containing the test data. Press the Next button     In Step 3 Complex types must be define for each type of input record. Select the Root-Element and Click on the Add Complex Type icon This creates a new empty complex type definition shown below. The fastest way to create the definition is to highlight the first line of the Sample File data and drag the line onto the  <new_complex_type> Format Builder introspects the data and provides a grid to define additional fields. Change the “Complex Type Name” to  “itemRecord” Then click on the ruler to indicate the position of fixed columns.  Drag the red triangle icons to the exact columns if necessary. Double click on an existing red triangle to remove an unwanted entry. In the case below fields are define in columns 0-3, 4-28, 29-eol When the field definitions are correct, press the “Generate Fields” button. Field entries named C1, C2 and C3 will be created as shown below. Click on the field names and rename them from C1->itemNum, C2->itemDesc and C3->itemCost  When all the fields are correctly defined press OK to save the complex type.        Next, the process is repeated to define a Complex Type for the SummaryRecord. Select the Root-Element in the schema tree and press the new complex type icon Then highlight and drag the Summary Record from the sample data onto the <new_complex_type>   Change the complex type name to “summaryRecord” Mark the fixed fields for Order Number and Order Date. Press the Generate Fields button and rename C1 and C2 to itemNum and orderDate respectively.   The last complex type to be defined is a type to hold the group of items and the summary record. Select the Root-Element in the schema tree and click the new complex type icon Select the “<new_complex_type>” entry and click the pencil icon   On the Complex Type Details page change the name and type of each input field. Change line 1 to be named item and set the Type  to “itemRecord” Change line 2 to be named summary and set the Type to “summaryRecord” We also need to indicate that itemRecords repeat in the input file. Click the pencil icon at the right side of the item line. On the Edit Details page change the “Max Occurs” entry from 1 to UNBOUNDED. We also need to indicate how to identify an itemRecord.  Since each item record has “.” in column 32 we can use this fact to differentiate an item record from a summary record. Change the “Look Ahead” field to value 32 and enter a period in the “Look For” field Press the OK button to save entry.     Finally, its time to create a top level element to represent an order. Select the “Root-Element” in the schema tree and press the New element icon Click on the <new_element> and press the pencil icon.   Set the Element Name to “order” and change the Data Type to “logicalOrderRecord” Press the OK button to save the element definition.   The final definition should match the screenshot below. Press the Next Button to view the definition source.     Press the Test Button to test the definition   Press the Green Triangle Icon to run the test.   And we are presented with an unwelcome error. The error states that the processor ran out of data while working through the definition. The processor was unable to differentiate between itemRecords and summaryRecords and therefore treated the entire file as a list of itemRecords.  At end of file, the “summary” portion of the logicalOrderRecord remained unprocessed but mandatory.   This root cause of this error is the loss of our “lookAhead” definition used to identify itemRecords. This appears to be a bug in the  Native Format Builder 11.1.1.4.0 Luckily, a simple workaround exists. Press the Cancel button and return to the “Step 4 of 4” Window. Manually add    nxsd:lookAhead="32" nxsd:lookFor="."   attributes after the maxOccurs attribute of the item element. as shown in the highlighted text below.   When the lookAhead and lookFor attributes have been added Press the Test button and on the Test page press the Green Triangle. The test is now successful, the first order in the file is returned by the File Adapter.     Below is a complete listing of the Result XML from the right column of the screen above   Try running it The downloaded input test file and completed schema file can be used for testing without following all the Native Format Builder steps in this example. Use the following link to download a file containing the sample data. Download Sample Input Data This is the best approach rather than cutting and pasting the input data at the top of the article.  Since the data is fixed length it’s very important to watch out for trailing spaces in the data and to ensure an eol character at the end of every line. The download file is correctly formatted. The final schema definition can be downloaded at the following link Download Completed Schema Definition   - Save the inputData.txt file to a known location like the xsd folder in your project. - Save the inputData_6.xsd file to the xsd folder in your project. - At step 1 in the Native Format Builder wizard  (as shown above) check the “Edit existing” radio button,    then browse and select the inputData_6.xsd file - At step 2 of the Format Builder configuration Wizard (as shown above) supply the path and filename for    the inputData.txt file. - You can then proceed to the test page and run a test. - Remember the wizard bug will drop the lookAhead and lookFor attributes,  you will need to manually add   nxsd:lookAhead="32" nxsd:lookFor="."    after the maxOccurs attribute of the item element in the   LogicalOrderRecord Complex Type.  (as shown above)   Good Luck with your Format Project

    Read the article

  • Quick guide to Oracle IRM 11g: Server configuration

    - by Simon Thorpe
    Quick guide to Oracle IRM 11g index Welcome to the second article in this quick quide to Oracle IRM 11g. Hopefully you've just finished the first article which takes you through deploying the software onto a Linux server. This article walks you through the configuration of this new service and contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Create IRM WebLogic Domain Starting the Admin Server and initial configuration Introduction In the previous article the database was prepared, the WebLogic Application Server installed and the files required for an IRM server installed. But we don't actually have a configured system yet. We need to now create a WebLogic Domain in which the IRM server will run, then configure some of the settings and crypography so that we can create a context and be ready to seal some content and test it all works. This article doesn't cover the configuration of SSL communication from client to server. This is quite a big topic and a separate article has been dedicated for this area. In these articles I also use the hostname, irm.company.internal to reference the IRM server and later on use the hostname irm.company.com in reference to the public facing service. Create IRM WebLogic Domain First step is creating the WebLogic domain, in a console switch to the newly created IRM installation folder as shown below and we will run the domain configuration wizard. [oracle@irm /]$ cd /oracle/middleware/Oracle_IRM/common/bin [oracle@irm bin]$ ./config.sh First thing the wizard will ask is if you wish to create a new or extend an existing domain. This guide is creating a standalone system so you should select to create a new domain. Next step is to choose what technologies from the Oracle ECM Suite you wish this domain to host. You are only interested in selecting the option "Oracle Information Rights Management". When you select this check box you will notice that it also selects "Oracle Enterprise Manager" and "Oracle JRF" as these are dependencies of the IRM server. You then need to specify where you wish to place the domain files. I usually just change the domain name from base_domain or irm_domain and leave the others with their defaults. Now the domain will have a single user initially and by default this user is called "weblogic". I usually change this account name to "sysadmin" or "administrator", but in this guide lets just accept the default. With respects to the next dialog, again for eval or dev reasons, leave the server startup mode as development. The JDK should also be automatically detected. We now need to provide details of the database. This guide is using the Oracle 11gR2 database and the settings I used can be seen in the image to the right. There is a lot of configuration that can now be done for the admin server, any managed servers and where the deployments reside. In this guide I am leaving all of these to their defaults so do not check any of the boxes. However I will on this blog be detailing later how you can go back and setup things such as automated startup of an IRM server which require changes to these default settings. But for now, lets leave it all alone and just click next. Now we are ready to install. Note that from this dialog you can scroll the left window and see there are going to be two servers created from the defaults. The AdminServer which is where you modify settings for the WebLogic Server and also hosts the Oracle Enterprise Manager for IRM which allows to monitor the IRM service performance and also make service related settings (which we shortly do below) and the IRM_server1 which hosts the actual IRM services themselves. So go right ahead and hit create, the process is pretty quick and usually under 10 minutes. When the domain creation ends, it will give you the URL to the admin server. It's worth noting this down and the URL is usually; http://irm.company.internal:7001 Starting the Admin Server and initial configuration First thing to do is to start the WebLogic Admin server and review the initial IRM server settings. In this guide we are going to run the Admin server and IRM server in console windows, in another article I will discuss running these as background services. So for now, start a console and run the Admin server by doing the following. cd /oracle/middleware/user_projects/domains/irm_domain/ ./startWebLogic.sh Wait for the server to start, you are looking for the following line to be reported in the console window. <BEA-00360><Server started in RUNNING mode> First step is configuring the IRM service via Enterprise Manager. Now that the Admin server is running you can point a browser at http://irm.company.internal:7001/em. Login with the username and password you supplied when you created the domain. In Enterprise Manager the IRM service administrator is able to make server wide configuration. However finding where to access the pages with these settings can be a bit of a challenge. After logging in on the left you'll see a tree containing elements of the Enterprise Manager farm Farm_irm_domain. Open up Content Management, then Information Rights Management and finally select the IRM node. On the right then select the IRM menu item, navigate to the Administration section and now we have four options, for now, we are just going to look at General Settings. The image on the right proves that a picture is worth a thousand words (or 113 in this case). The General Settings page allows you to set the cryptographic algorithms used for protecting sealed content. Unless you have a burning need to increase the key lengths or you need to comply to a regulation or government mandate, AES192 is a good start. You can change this later on without worry. The most important setting here we need to make is the Server URL. In this blog article I go over why this URL is so important, basically every single piece of content you protect with Oracle IRM is going to have this URL embedded in it, so if it's wrong or unresolvable, then nobody can open the secured documents. Note that in our environment we have yet to do any SSL configuration of the service. If you intend to build a server without SSL, then use http as the protocol instead of https. But I would recommend using SSL and setting this up is described in the next article. I would also probably up the device count from 1 to 3. This means that any user can retrieve rights to access content onto 3 computers at any one time. The default of 1 doesn't really make sense in development, evaluation nor even production environments and my experience is that 3 is a better number. Next step is to create the keystore for the IRM server. When a classification (called a context) is created, Oracle IRM generates a unique set of symmetric keys which are used to secure the content itself. These keys are then encrypted with a set of "wrapper" asymmetric cryptography keys which are stored externally to the server either in a Java Key Store or a HSM. These keys need to be generated and the following shows my commands and the resulting output. I have greyed out the responses from the commands so you can see the input a little easier. [oracle@irmsrv ~]$ cd /oracle/middleware/wlserver_10.3/server/bin/ [oracle@irmsrv bin]$ ./setWLSEnv.sh CLASSPATH=/oracle/middleware/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/middleware/patch_ocp353/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.6.0_18/lib/tools.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/middleware/modules/features/weblogic.server.modules_10.3.3.0.jar:/oracle/middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar: PATH=/oracle/middleware/wlserver_10.3/server/bin:/oracle/middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.6.0_18/jre/bin:/usr/java/jdk1.6.0_18/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin Your environment has been set. [oracle@irmsrv bin]$ cd /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/ [oracle@irmsrv fmwconfig]$ keytool -genkeypair -alias oracle.irm.wrap -keyalg RSA -keysize 2048 -keystore irm.jks Enter keystore password: Re-enter new password: What is your first and last name? [Unknown]: Simon Thorpe What is the name of your organizational unit? [Unknown]: Oracle What is the name of your organization? [Unknown]: Oracle What is the name of your City or Locality? [Unknown]: San Francisco What is the name of your State or Province? [Unknown]: CA What is the two-letter country code for this unit? [Unknown]: US Is CN=Simon Thorpe, OU=Oracle, O=Oracle, L=San Francisco, ST=CA, C=US correct? [no]: yes Enter key password for (RETURN if same as keystore password): At this point we now have an irm.jks in the directory /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig. The reason we store it here is this folder would be backed up as part of a domain backup. As with any cryptographic technology, DO NOT LOSE THESE KEYS OR THIS KEY STORE. Once you've sealed content against a context, the keys will be wrapped with these keys, lose these keys, and you can't get access to any secured content, pretty important. Now we've got the keys created, we need to go back to the IRM Enterprise Manager and set the location of the key store. Going back to the General Settings page in Enterprise Manager scroll down to Keystore Settings. Leave the type as JKS but change the location to; /oracle/Middleware/user_projects/domains/irm_domain/config/fmwconfig/irm.jks and hit Apply. The final step with regards to the key store is we need to tell the server what the password is for the Java Key Store so that it can be opened and the keys accessed. Once more fire up a console window and run these commands (again i've greyed out the clutter to see the commands easier). You will see dummy passed into the commands, this is because the command asks for a username, but in this instance we don't use one, hence the value dummy is passed and it isn't used. [oracle@irmsrv fmwconfig]$ cd /oracle/middleware/Oracle_IRM/common/bin/ [oracle@irmsrv bin]$ ./wlst.sh ... lots of settings fly by... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands wls:/offline>connect('weblogic','password','t3://irmsrv.us.oracle.com:7001') Connecting to t3://irmsrv.us.oracle.com:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'irm_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. wls:/irm_domain/serverConfig>createCred("IRM","keystore:irm.jks","dummy","password") Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root. For more help, use help(domainRuntime)wls:/irm_domain/serverConfig>createCred("IRM","key:irm.jks:oracle.irm.wrap","dummy","password") Already in Domain Runtime Tree wls:/irm_domain/serverConfig> At last we are now ready to fire up the IRM server itself. The domain creation created a managed server called IRM_server1 and we need to start this, use the following commands in a new console window. cd /oracle/middleware/user_projects/domains/irm_domain/bin/ ./startManagedWebLogic.sh IRM_server1 This will start up the server in the console, unlike the Admin server, you need to provide the username and password for the service to start. Enter in your weblogic username and password when prompted. You can change this behavior by putting the password into a boot.properties file, read more about this in the WebLogic Server documentation. Once running, wait until you see the line; <Notice><WebLogicServer><BEA-000360><Server started in RUNNING mode> At this point we can now login to the Oracle IRM Management Website at the URL. http://irm.company.internal:1600/irm_rights/ The server is just configured for HTTP at the moment, no SSL involved. Just want to ensure we can get a working system up and running. You should now see a login like the image on the right and you can now login using your weblogic username and password. The next article in this guide goes over adding SSL and now testing your server by actually adding a few users, sealing some content and opening this content as a user.

    Read the article

  • SQL SERVER – Enumerations in Relational Database – Best Practice

    - by pinaldave
    Marko Parkkola This article has been submitted by Marko Parkkola, Data systems designer at Saarionen Oy, Finland. Marko is excellent developer and always thinking at next level. You can read his earlier comment which created very interesting discussion here: SQL SERVER- IF EXISTS(Select null from table) vs IF EXISTS(Select 1 from table). I must express my special thanks to Marko for sending this best practice for Enumerations in Relational Database. He has really wrote excellent piece here and welcome comments here. Enumerations in Relational Database This is a subject which is very basic thing in relational databases but often not very well understood and sometimes badly implemented. There are of course many ways to do this but I concentrate only two cases, one which is “the right way” and one which is definitely wrong way. The concept Let’s say we have table Person in our database. Person has properties/fields like Firstname, Lastname, Birthday and so on. Then there’s a field that tells person’s marital status and let’s name it the same way; MaritalStatus. Now MaritalStatus is an enumeration. In C# I would definitely make it an enumeration with values likes Single, InRelationship, Married, Divorced. Now here comes the problem, SQL doesn’t have enumerations. The wrong way This is, in my opinion, absolutely the wrong way to do this. It has one upside though; you’ll see the enumeration’s description instantly when you do simple SELECT query and you don’t have to deal with mysterious values. There’s plenty of downsides too and one would be database fragmentation. Consider this (I’ve left all indexes and constraints out of the query on purpose). CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] NVARCHAR(10) ) You have nvarchar(20) field in the table that tells the marital status. Obvious problem with this is that what if you create a new value which doesn’t fit into 20 characters? You’ll have to come and alter the table. There are other problems also but I’ll leave those for the reader to think about. The correct way Here’s how I’ve done this in many projects. This model still has one problem but it can be alleviated in the application layer or with CHECK constraints if you like. First I will create a namespace table which tells the name of the enumeration. I will add one row to it too. I’ll write all the indexes and constraints here too. CREATE TABLE [CodeNamespace] ( [Id] INT IDENTITY(1, 1), [Name] NVARCHAR(100) NOT NULL, CONSTRAINT [PK_CodeNamespace] PRIMARY KEY ([Id]), CONSTRAINT [IXQ_CodeNamespace_Name] UNIQUE NONCLUSTERED ([Name]) ) GO INSERT INTO [CodeNamespace] SELECT 'MaritalStatus' GO Then I create a table that holds the actual values and which reference to namespace table in order to group the values under different namespaces. I’ll add couple of rows here too. CREATE TABLE [CodeValue] ( [CodeNamespaceId] INT NOT NULL, [Value] INT NOT NULL, [Description] NVARCHAR(100) NOT NULL, [OrderBy] INT, CONSTRAINT [PK_CodeValue] PRIMARY KEY CLUSTERED ([CodeNamespaceId], [Value]), CONSTRAINT [FK_CodeValue_CodeNamespace] FOREIGN KEY ([CodeNamespaceId]) REFERENCES [CodeNamespace] ([Id]) ) GO -- 1 is the 'MaritalStatus' namespace INSERT INTO [CodeValue] SELECT 1, 1, 'Single', 1 INSERT INTO [CodeValue] SELECT 1, 2, 'In relationship', 2 INSERT INTO [CodeValue] SELECT 1, 3, 'Married', 3 INSERT INTO [CodeValue] SELECT 1, 4, 'Divorced', 4 GO Now there’s four columns in CodeValue table. CodeNamespaceId tells under which namespace values belongs to. Value tells the enumeration value which is used in Person table (I’ll show how this is done below). Description tells what the value means. You can use this, for example, column in UI’s combo box. OrderBy tells if the values needs to be ordered in some way when displayed in the UI. And here’s the Person table again now with correct columns. I’ll add one row here to show how enumerations are to be used. CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] INT ) GO INSERT INTO [Person] SELECT 'Marko', 'Parkkola', '1977-03-04', 3 GO Now I said earlier that there is one problem with this. MaritalStatus column doesn’t have any database enforced relationship to the CodeValue table so you can enter any value you like into this field. I’ve solved this problem in the application layer by selecting all the values from the CodeValue table and put them into a combobox / dropdownlist (with Value field as value and Description as text) so the end user can’t enter any illegal values; and of course I’ll check the entered value in data access layer also. I said in the “The wrong way” section that there is one benefit to it. In fact, you can have the same benefit here by using a simple view, which I schema bound so you can even index it if you like. CREATE VIEW [dbo].[Person_v] WITH SCHEMABINDING AS SELECT p.[Firstname], p.[Lastname], p.[BirthDay], c.[Description] MaritalStatus FROM [dbo].[Person] p JOIN [dbo].[CodeValue] c ON p.[MaritalStatus] = c.[Value] JOIN [dbo].[CodeNamespace] n ON n.[Id] = c.[CodeNamespaceId] AND n.[Name] = 'MaritalStatus' GO -- Select from View SELECT * FROM [dbo].[Person_v] GO This is excellent write up byMarko Parkkola. Do you have this kind of design setup at your organization? Let us know your opinion. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Database, DBA, Readers Contribution, Software Development, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • WPF ListView as a DataGrid – Part 3

    - by psheriff
    I have had a lot of great feedback on the blog post about turning the ListView into a DataGrid by creating GridViewColumn objects on the fly. So, in the last 2 parts, I showed a couple of different methods for accomplishing this. Let’s now look at one more and that is use Reflection to extract the properties from a Product, Customer, or Employee object to create the columns. Yes, Reflection is a slower approach, but you could create the columns one time then cache the View object for re-use. Another potential drawback is you may have columns in your object that you do not wish to display on your ListView. But, just because so many people asked, here is how to accomplish this using Reflection.   Figure 1: Use Reflection to create GridViewColumns. Using Reflection to gather property names is actually quite simple. First you need to pass any type (Product, Customer, Employee, etc.) to a method like I did in my last two blog posts on this subject. Below is the method that I created in the WPFListViewCommon class that now uses reflection. C#public static GridView CreateGridViewColumns(Type anyType){  // Create the GridView  GridView gv = new GridView();  GridViewColumn gvc;   // Get the public properties.  PropertyInfo[] propInfo =          anyType.GetProperties(BindingFlags.Public |                                BindingFlags.Instance);   foreach (PropertyInfo item in propInfo)  {    gvc = new GridViewColumn();    gvc.DisplayMemberBinding = new Binding(item.Name);    gvc.Header = item.Name;    gvc.Width = Double.NaN;    gv.Columns.Add(gvc);  }   return gv;} VB.NETPublic Shared Function CreateGridViewColumns( _  ByVal anyType As Type) As GridView  ' Create the GridView   Dim gv As New GridView()  Dim gvc As GridViewColumn   ' Get the public properties.   Dim propInfo As PropertyInfo() = _    anyType.GetProperties(BindingFlags.Public Or _                          BindingFlags.Instance)   For Each item As PropertyInfo In propInfo    gvc = New GridViewColumn()    gvc.DisplayMemberBinding = New Binding(item.Name)    gvc.Header = item.Name    gvc.Width = [Double].NaN    gv.Columns.Add(gvc)  Next   Return gvEnd Function The key to using Relection is using the GetProperties method on the type you pass in. When you pass in a Product object as Type, you can now use the GetProperties method and specify, via flags, which properties you wish to return. In the code that I wrote, I am just retrieving the Public properties and only those that are Instance properties. I do not want any static/Shared properties or private properties. GetProperties returns an array of PropertyInfo objects. You can loop through this array and build your GridViewColumn objects by reading the Name property from the PropertyInfo object. Build the Product Screen To populate the ListView shown in Figure 1, you might write code like the following: C#private void CollectionSample(){  Product prod = new Product();   // Setup the GridView Columns  lstData.View =      WPFListViewCommon.CreateGridViewColumns(typeOf(Product));  lstData.DataContext = prod.GetProducts();} VB.NETPrivate Sub CollectionSample()  Dim prod As New Product()   ' Setup the GridView Columns  lstData.View = WPFListViewCommon.CreateGridViewColumns( _       GetType(Product))  lstData.DataContext = prod.GetProducts()End Sub All you need to do now is to pass in a Type object from your Product class that you can get by using the typeOf() function in C# or the GetType() function in VB. That’s all there is to it! Summary There are so many different ways to approach the same problem in programming. That is what makes programming so much fun! In this blog post I showed you how to create ListView columns on the fly using Reflection. This gives you a lot of flexibility without having to write extra code as was done previously. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "WPF ListView as a DataGrid – Part 3" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".  

    Read the article

  • SQL SERVER – Spatial Database Queries – What About BLOB – T-SQL Tuesday #006

    - by pinaldave
    Michael Coles is one of the most interesting book authors I have ever met. He has a flair of writing complex stuff in a simple language. There are a very few people like that.  I really enjoyed reading his recent book, Expert SQL Server 2008 Encryption. I strongly suggest taking a look at it. This blog is written in response to T-SQL Tuesday #006: “What About BLOB? by Michael Coles. Spatial Database is my favorite subject. Since I did my TechEd India 2010 presentation, I have enjoyed this subject a lot. Before I continue this blog post, there are a few other blog posts, so I suggest you read them.  To help build the environment run the queries, I am going to present them in this single blog post. SQL SERVER – What is Spatial Database? – Developing with SQL Server Spatial and Deep Dive into Spatial Indexing This blog post explains the basics of Spatial Database and also provides a good introduction to Indexing concept. SQL SERVER – World Shapefile Download and Upload to Database – Spatial Database This blog post will enable you with how to load the shape file into database. SQL SERVER – Spatial Database Definition and Research Documents This blog post links to the white paper about Spatial Database written by Microsoft experts. SQL SERVER – Introduction to Spatial Coordinate Systems: Flat Maps for a Round Planet This blog post links to the white paper explaining coordinate system, as written by Microsoft experts. After reading the above listed blog posts, I am very confident that you are ready to run the following script. Once you create a database using the World Shapefile, as mentioned in the second link above,you can display the image of India just like the following. Please note that this is not an accurate political map. The boundary of this map has many errors and it is just a representation. You can run the following query to generate the map of India from the database spatial which you have created after following the instructions here. USE Spatial GO -- India Map SELECT [CountryName] ,[BorderAsGeometry] ,[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Now, let us find the longitude and latitude of the two major IT cities of India, Hyderabad and Bangalore. I find their values as the following: the values of longitude-latitude for Bangalore is 77.5833300000 13.0000000000; for Hyderabad, longitude-latitude is 78.4675900000 17.4531200000. Now, let us try to put these values on the India Map and see their location. -- Bangalore DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326).STBuffer(20000); -- Hyderabad DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326).STBuffer(20000); -- Bangalore and Hyderabad on Map of India SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation) <= 0 UNION ALL SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation1) <= 0 UNION ALL SELECT '',[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Now let us quickly draw a straight line between them. DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326).STBuffer(10000); DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326).STBuffer(10000); DECLARE @GeoLocation2 GEOGRAPHY SET @GeoLocation2 = GEOGRAPHY::STGeomFromText('LINESTRING(78.4675900000 17.4531200000, 77.5833300000 13.0000000000)',4326) SELECT name, [GeoLocation] FROM [IndiaGeoNames] I WHERE I.[GeoLocation].STDistance(@GeoLocation) <= 0 UNION ALL SELECT name, [GeoLocation] FROM [IndiaGeoNames] I1 WHERE I1.[GeoLocation].STDistance(@GeoLocation1) <= 0 UNION ALL SELECT '' name, @GeoLocation2 UNION ALL SELECT '',[Border] FROM [Spatial].[dbo].[Countries] WHERE Countryname = 'India' GO Let us use the distance function of the spatial database and find the straight line distance between this two cities. -- Distance Between Hyderabad and Bangalore DECLARE @GeoLocation GEOGRAPHY SET @GeoLocation = GEOGRAPHY::STPointFromText('POINT(78.4675900000 17.4531200000)',4326) DECLARE @GeoLocation1 GEOGRAPHY SET @GeoLocation1 = GEOGRAPHY::STPointFromText('POINT(77.5833300000 13.0000000000)',4326) SELECT @GeoLocation.STDistance(@GeoLocation1)/1000 'KM'; GO The result of above query is as displayed in following image. As per SQL Server, the distance between these two cities is 501 KM, but according to what I know, the distance between those two cities is around 562 KM by road. However, please note that roads are not straight and they have lots of turns, whereas this is a straight-line distance. What would be more accurate is the distance between these two cities by air travel. When we look at the air travel distance between Bangalore and Hyderabad, the total distance covered is 495 KM, which is very close to what SQL Server has estimated, which is 501 KM. Bravo! SQL Server has accurately provided the distance between two of the cities. SQL Server Spatial Database can be very useful simply because it is very easy to use, as demonstrated above. I appreciate your comments, so let me know what your thoughts and opinions about this are. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Spatial Database

    Read the article

  • C# 4.0: Named And Optional Arguments

    - by Paulo Morgado
    As part of the co-evolution effort of C# and Visual Basic, C# 4.0 introduces Named and Optional Arguments. First of all, let’s clarify what are arguments and parameters: Method definition parameters are the input variables of the method. Method call arguments are the values provided to the method parameters. In fact, the C# Language Specification states the following on §7.5: The argument list (§7.5.1) of a function member invocation provides actual values or variable references for the parameters of the function member. Given the above definitions, we can state that: Parameters have always been named and still are. Parameters have never been optional and still aren’t. Named Arguments Until now, the way the C# compiler matched method call definition arguments with method parameters was by position. The first argument provides the value for the first parameter, the second argument provides the value for the second parameter, and so on and so on, regardless of the name of the parameters. If a parameter was missing a corresponding argument to provide its value, the compiler would emit a compilation error. For this call: Greeting("Mr.", "Morgado", 42); this method: public void Greeting(string title, string name, int age) will receive as parameters: title: “Mr.” name: “Morgado” age: 42 What this new feature allows is to use the names of the parameters to identify the corresponding arguments in the form: name:value Not all arguments in the argument list must be named. However, all named arguments must be at the end of the argument list. The matching between arguments (and the evaluation of its value) and parameters will be done first by name for the named arguments and than by position for the unnamed arguments. This means that, for this method definition: public static void Method(int first, int second, int third) this call declaration: int i = 0; Method(i, third: i++, second: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = i++; int CS$0$0001 = ++i; Method(i, CS$0$0001, CS$0$0000); which will give the method the following parameter values: first: 2 second: 2 third: 0 Notice the variable names. Although invalid being invalid C# identifiers, they are valid .NET identifiers and thus avoiding collision between user written and compiler generated code. Besides allowing to re-order of the argument list, this feature is very useful for auto-documenting the code, for example, when the argument list is very long or not clear, from the call site, what the arguments are. Optional Arguments Parameters can now have default values: public static void Method(int first, int second = 2, int third = 3) Parameters with default values must be the last in the parameter list and its value is used as the value of the parameter if the corresponding argument is missing from the method call declaration. For this call declaration: int i = 0; Method(i, third: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = ++i; Method(i, 2, CS$0$0000); which will give the method the following parameter values: first: 1 second: 2 third: 1 Because, when method parameters have default values, arguments can be omitted from the call declaration, this might seem like method overloading or a good replacement for it, but it isn’t. Although methods like this: public static StreamReader OpenTextFile( string path, Encoding encoding = null, bool detectEncoding = true, int bufferSize = 1024) allow to have its calls written like this: OpenTextFile("foo.txt", Encoding.UTF8); OpenTextFile("foo.txt", Encoding.UTF8, bufferSize: 4096); OpenTextFile( bufferSize: 4096, path: "foo.txt", detectEncoding: false); The complier handles default values like constant fields taking the value and useing it instead of a reference to the value. So, like with constant fields, methods with parameters with default values are exposed publicly (and remember that internal members might be publicly accessible – InternalsVisibleToAttribute). If such methods are publicly accessible and used by another assembly, those values will be hard coded in the calling code and, if the called assembly has its default values changed, they won’t be assumed by already compiled code. At the first glance, I though that using optional arguments for “bad” written code was great, but the ability to write code like that was just pure evil. But than I realized that, since I use private constant fields, it’s OK to use default parameter values on privately accessed methods.

    Read the article

  • On automating a split-mirror ASM backup with EMC TimeFinder ...

    - by [email protected]
    Normal 0 21 false false false MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Hi clerks,   Offloading the backup operation to another host using disk cloning could really improve the performance on highly busy databases ( 24x7, zero downtime and all this stuff ...) There are well know white papers on this subject, ASM included, but today Im showing you a nice way to automate the procedure using shell scripting with EMC TimeFinder technologies:   Assumptions: *********** ASM diskgroups name:   +data_${db_name} : asm data diskgroup +fra_${db_name} :  asm fra  diskgroup   EMC Time Finder sync groups name:   rac_${DB_NAME}_data_tf : data group rac_${DB_NAME}_fra_tf:   fra group     There are two scripts, one located on the production box ( bck_database.sh ) and the other one on the backup server node ( bck_database_mirror.sh ) The second one is remotly executed from the production host There are a bunch of variables along the code with selfexplanatory names I guess, anyway let me know if you want some help     #!/bin/ksh ### ###  Copyright (c) 1988, 2010, Oracle Corporation.  All Rights Reserved. ### ###    NAME ###     bck_database.sh ### ###    DESCRIPTION ###     Database backup on third mirror ### ###    RETURNS ### ###    NOTES ### ###    MODIFIED                                 (DD/MM/YY) ###    Oracle            28/01/10             - Creacion ###   V_DATE=`/bin/date +%Y%m%d_%H%M%S` V_FICH_LOG=`dirname $0`/trace_dir_location/`basename $0`.${V_DATE}.log exec 4>&1 tee ${V_FICH_LOG} >&4 |& exec 1>&p 2>&1     ADMIN_DIR=`dirname $0` . ${ADMIN_DIR}/setenv_instance.sh -- This script should set the instance vars like Oracle Home, Sid, db_name ... if [ $? -ne 0 ] then   echo "Error when setting the environment."   exit 1 fi   echo "${V_DATE} ####################################################" echo "Executing database backup: ${DB_NAME}" echo "####################################################################"   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm data diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf establish -noprompt if [ $? -ne 0 ] then   echo "Error when sync asm data diskgroups"   exit 2 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm data disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf -i 30 verify if [ $? -ne 0 ] then   echo "Error when verifying asm data diskgroups"   exit 3 fi     V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm fra diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf establish -noprompt if [ $? -ne 0 ] then   echo "Error when sync asm fra diskgroups"   exit 4 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm fra disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf -i 30 verify if [ $? -ne 0 ] then   echo "Error when verifying asm fra diskgroups"   exit 5 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "ASM sync sucessfully completed!" echo "####################################################################"     V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to BEGIN BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-!   whenever sqlerror exit 1   connect / as sysdba   whenever sqlerror exit   alter system archive log current;   alter database ${DB_NAME} begin backup; ! if [ $? -ne 0 ] then   echo "Error when updating database status to BEGIN backup"   exit 6 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm data disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf split -noprompt if [ $? -ne 0 ] then   echo "Error when splitting asm data disks"   exit 7 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to END BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-!   whenever sqlerror exit 1   connect / as sysdba   whenever sqlerror exit   alter database ${DB_NAME} end backup;   alter system archive log current; ! if [ $? -ne 0 ] then   echo "Error when updating database status to END backup"   exit 8 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Generating controlfile copies...." echo "####################################################################" rman<<-! connect target / run { allocate channel ch1 type DISK; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_mount.ctl'; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl'; } ! if [ $? -ne 0 ] then   echo "Error generating controlfile copies"   exit 9 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Resync RMAN catalog ....." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} resync catalog; ! if [ $? -ne 0 ] then   echo "Error when resyncing RMAN catalog"   exit 10 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm fra disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf split -noprompt if [ $? -ne 0 ] then   echo "Error when splitting asm fra disks"   exit 11 fi     echo "WARNING!: Calling bck_database_mirror.sh host ${NODE_BCK_SERVER}..." ssh ${NODO_BCK_SERVER} ${ADMIN_DIR_BCK}/bck_database_mirror.sh if [ $? -ne 0 ] then   echo "Error, when remote executing the backup "   exit 12 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Cleaning the archived redo logs already copied to tape ..." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} run { resync catalog; delete noprompt archivelog all backed up 1 times to device type sbt; } ! if [ $? -ne 0 ] then   echo "Error when cleaning the archived redo logs"   exit 13 fi echo "${V_DATE} ####################################################" echo "Backup sucessfully executed!!" echo "####################################################################" exit 0   ------------------------------------------------------------------------------ ------------------------** BACKUP SERVER NODE ** ----------------------------- ------------------------------------------------------------------------------   #!/bin/ksh ### ###  Copyright (c) 1988, 2010, Oracle Corporation.  All Rights Reserved. ### ###    ###    NAME ###     bck_database_mirror.sh ### ###    DESCRIPTION ###      Backup @ backup server ### ###    RETURNS ### ###    NOTES ### ###    MODIFIED                                 (DD/MM/YY) ###      Oracle                    28/01/10     - Creacion         V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Starting ASM instance ..."   echo "####################################################################"   ${V_ADMIN_DIR}/start_asm.sh -- This script is supposed to start the ASM instance in the backup server   if [ $? -ne 0 ]   then     echo "Error when tying to start ASM instance."     exit 1   fi       . ${V_ADMIN_DIR}/setenv_asm.sh -- This script is supposed to set the env. variables of the ASM instance   if [ $? -ne 0 ]   then     echo "Error when setting the ASM environment"     exit 1   fi       V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "The asm diskgroups/disks dettected are the following ..."   echo "####################################################################"     sqlplus /nolog <<-!     whenever sqlerror exit 1     connect / as sysdba     whenever sqlerror exit     SET LINES 200     COL PATH FORMAT A25     SELECT DISK.MOUNT_STATUS, DISK.PATH, DISK.NAME, DISK_GROUP.NAME, DISK_GROUP.TOTAL_MB FROM V\$ASM_DISK DISK, V\$ASM_DISKGROUP DISK_GROUP WHERE DISK.GROUP_NUMBER=DISK_GROUP.GROUP_NUMBER; !       V_ADMIN_DIR=`dirname $0`   . ${V_ADMIN_DIR}/setenv_instance.sh -- This script is supposed to set the env. variables of the database instance   if [ $? -ne 0 ]   then     echo "Error when setting the database instance environment"     exit 1   fi     V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Starting ${DB_NAME} in MOUNT mode..."   echo "####################################################################"   ${V_ADMIN_DIR}/start_instance_mount.sh -- This script is supposed to do a startup mount   if [ $? -ne 0 ]   then     echo "Error starting  ${DB_NAME} in MOUNT mode"     exit 1   fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Executing RMAN backup..."   echo "####################################################################"   rman<<-!   connect target /   connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG}   run {   allocate channel ch1 type 'SBT_TAPE' parms'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt)'; -- TDPO Media Library   crosscheck archivelog all;   backup tag BCK_CONTROLFILE_ST_${DB_NAME}   format 'ctl_%d_%s__%p_%t'   controlfilecopy '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl';   backup tag BCK_DATAFILE_ST_${DB_NAME} full   format 'db_%d_%s_%p_%t'database;   backup tag BCK_ARCHLOG_ST_${DB_NAME} format 'al_%d_%s_%p_%t' archivelog all;   release channel ch1;   } !   if [ $? -ne 0 ]   then     echo "Error executing the RMAN backup"     exit 1   fi     ${V_ADMIN_DIR}/stop_instance_immediate.sh -- This script is supposed to do a shutdown immediate of the database instance   ${ADMIN_DIR}/stop_asm_immediate.sh -- This script is supposed to do a shutdown immediate of the ASM instance   exit 0     fi   Hope it helps someone! --L

    Read the article

  • SQL SERVER – Advanced Data Quality Services with Melissa Data – Azure Data Market

    - by pinaldave
    There has been much fanfare over the new SQL Server 2012, and especially around its new companion product Data Quality Services (DQS). Among the many new features is the addition of this integrated knowledge-driven product that enables data stewards everywhere to profile, match, and cleanse data. In addition to the homegrown rules that data stewards can design and implement, there are also connectors to third party providers that are hosted in the Azure Datamarket marketplace.  In this review, I leverage SQL Server 2012 Data Quality Services, and proceed to subscribe to a third party data cleansing product through the Datamarket to showcase this unique capability. Crucial Questions For the purposes of the review, I used a database I had in an Excel spreadsheet with name and address information. Upon a cursory inspection, there are miscellaneous problems with these records; some addresses are missing ZIP codes, others missing a city, and some records are slightly misspelled or have unparsed suites. With DQS, I can easily add a knowledge base to help standardize my values, such as for state abbreviations. But how do I know that my address is correct? And if my address is not correct, what should it be corrected to? The answer lies in a third party knowledge base by the acknowledged USPS certified address accuracy experts at Melissa Data. Reference Data Services Within DQS there is a handy feature to actually add reference data from many different third-party Reference Data Services (RDS) vendors. DQS simplifies the processes of cleansing, standardizing, and enriching data through custom rules and through service providers from the Azure Datamarket. A quick jump over to the Datamarket site shows me that there are a handful of providers that offer data directly through Data Quality Services. Upon subscribing to these services, one can attach a DQS domain or composite domain (fields in a record) to a reference data service provider, and begin using it to cleanse, standardize, and enrich that data. Besides what I am looking for (address correction and enrichment), it is possible to subscribe to a host of other services including geocoding, IP address reference, phone checking and enrichment, as well as name parsing, standardization, and genderization.  These capabilities extend the data quality that DQS has natively by quite a bit. For my current address correction review, I needed to first sign up to a reference data provider on the Azure Data Market site. For this example, I used Melissa Data’s Address Check Service. They offer free one-month trials, so if you wish to follow along, or need to add address quality to your own data, I encourage you to sign up with them. Once I subscribed to the desired Reference Data Provider, I navigated my browser to the Account Keys within My Account to view the generated account key, which I then inserted into the DQS Client – Configuration under the Administration area. Step by Step to Guide That was all it took to hook in the subscribed provider -Melissa Data- directly to my DQS Client. The next step was for me to attach and map in my Reference Data from the newly acquired reference data provider, to a domain in my knowledge base. On the DQS Client home screen, I selected “New Knowledge Base” under Knowledge Base Management on the left-hand side of the home screen. Under New Knowledge Base, I typed a Name and description of my new knowledge base, then proceeded to the Domain Management screen. Here I established a series of domains (fields) and then linked them all together as a composite domain (record set). Using the Create Domain button, I created the following domains according to the fields in my incoming data: Name Address Suite City State Zip I added a Suite column in my domain because Melissa Data has the ability to return missing Suites based on last name or company. And that’s a great benefit of using these third party providers, as they have data that the data steward would not normally have access to. The bottom line is, with these third party data providers, I can actually improve my data. Next, I created a composite domain (fulladdress) and added the (field) domains into the composite domain. This essentially groups our address fields together in a record to facilitate the full address cleansing they perform. I then selected my newly created composite domain and under the Reference Data tab, added my third party reference data provider –Melissa Data’s Address Check- and mapped in each domain that I had to the provider’s Schema. Now that my composite domain has been married to the Reference Data service, I can take the newly published knowledge base and create a project to cleanse and enrich my data. My next task was to create a new Data Quality project, mapping in my data source and matching it to the appropriate domain column, and then kick off the verification process. It took just a few minutes with some progress indicators indicating that it was working. When the process concluded, there was a helpful set of tabs that place the response records into categories: suggested; new; invalid; corrected (automatically); and correct. Accepting the suggestions provided by  Melissa Data allowed me to clean up all the records and flag the invalid ones. It is very apparent that DQS makes address data quality simplistic for any IT professional. Final Note As I have shown, DQS makes data quality very easy. Within minutes I was able to set up a data cleansing and enrichment routine within my data quality project, and ensure that my address data was clean, verified, and standardized against real reference data. As reviewed here, it’s easy to see how both SQL Server 2012 and DQS work to take what used to require a highly skilled developer, and empower an average business or database person to consume external services and clean data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology Tagged: DQS

    Read the article

  • How to deploy Document Set using CAML in SharePoint2010 solution package

    - by ybbest
    In my last post, I showed you how to use Document Set using SharePoint UI in the browser. In this post, I’d like to show you how to create the same Document Set using CAML and SharePoint solution package. You can download the complete solution here. 1. Create the Application Number site column using the SharePoint empty element item template in VS2010 <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <Field Type="Text" DisplayName="ApplicationNumber" Required="FALSE" EnforceUniqueValues="FALSE" Indexed="FALSE" MaxLength="255" Group="YBBEST" ID="{916bf3af-5ec1-4441-acd8-88ff62ab1b7e}" Name="ApplicationNumber" ></Field> </Elements> 2. Create the Loan Application Form and Loan Contract Form content types. <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x0101005dfbf820ce3c49f69c73a00e0e0e53f6" Name="Loan Contract Form" Group="YBBEST" Description="Loan Contract Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x010100f3016e3d03454b93bc4d6ab63941c0d2" Name="Loan Application Form" Group="YBBEST" Description="Loan Application Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> </Elements> 3. Create the Loan Application Document Set. 4. Create the Document Set Welcome Page using the SharePoint Module item template. Notes: 1.When creating document set content type , you need to set the  Inherits=”FALSE”  or remove the  Inherits=”TRUE” from the content type definition (default is  Inherits=”FALSE”) . This is the Document Set limitation in the current version of SharePoint2010. Because of this , you also need to manually  attach the event receiver and  Document Set welcome page to your custom Document Set Content Type. 2. Shared Fields are push down only: 3. Not available in SharePoint foundation (only SharePoint Server 2010). 4. You can’t have folders within document sets (you can place document sets in folders though). For a complete limitation and considerations , you can see the references for details. References: Document Set Limitations and Considerations in SharePoint 2010 1 Document Set Limitations and Considerations in SharePoint 2010 2 Document Sets planning (SharePoint Server 2010) Import Document Sets Issue http://msdn.microsoft.com/en-us/library/gg581064.aspx http://channel9.msdn.com/Events/TechEd/NorthAmerica/2010/OSP305 DocumentSet Class

    Read the article

  • Dynamic Grouping and Columns

    - by Tim Dexter
    Some good collaboration between myself and Kan Nishida (Oracle BIP Consulting) over at bipconsulting on a question that came in yesterday to an internal mailing list. Is there a way to allow columns to be place into a template dynamically? This would be similar to the Answers Column selector. A customer has said Crystal can do this and I am trying to see how BI Pub can do the same. Example: Report has Regions as a dimension in a table, they want the user to select a parameter that will insert either Units or Dollars without having to create multiple templates. Now whether Crystal can actually do it or not is another question, can Publisher? Yes we can! Kan took the first stab. His approach, was to allow to swap out columns in a table in the report. Some quick steps: 1. Create a parameter from BIP server UI 2. Declare the parameter in RTF template You can check this post to see how you can declare the parameter from the server. http://bipconsulting.blogspot.com/2010/02/how-to-pass-user-input-values-to-report.html 3. Use the parameter value to condition if a particular column needs to be displayed or not. You can use <?if@column:.....?> syntax for Column level IF condition. The if@column is covered in user documentation. This would allow a developer to create a report with the parameter or multiple parameters to allow the user to pick a column to be included in the report. I took a slightly different tack, with the mention of the column selector in the Answers report I took that to mean that the user wanted to select more of a dimensional column and then have the report recalculate all its totals and subtotals based on that selected column. This is a little bit more involved and involves some smart XSL and XPATH expressions, but still very doable. The user can select a column as a parameter, that is passed to the template rather than the query. The parameter value that is actually passed is the element name that you want to regroup the data by. Inside the template we then reference that parameter value in our for-each-group loop. That's where we need the trixy XSL/XPATH code to get the regrouping to happen. At this juncture, I need to hat tip to Klaus, for his article on dynamic sorting that he wrote back in 2006. I basically took his sorting code and applied it to the for-each loop. You can follow both of Kan's first two steps above i.e. Create a parameter from BIP server UI - this just needs to be based on a 'list' type list of value with name/value pairs e.g. Department/DEPARTMENT_NAME, Job/JOB_TITLE, etc. The user picks the 'friendly' value and the server passes the element name to the template. Declare the parameter in RTF template - been here before lots of times right? <?param@begin:group1;'"DEPARTMENT_NAME"'?> I have used a default value so that I can test the funtionality inside the template builder (notice the single and double quotes.) Next step is to use the template builder to build a re-grouped report layout. It does not matter if its hard coded right now; we will add in the dynamic piece next. Once you have a functioning template that is re-grouping correctly. Open up the for-each-group field and modify it to use the parameter: <?for-each-group:ROW;./*[name(.) = $group1]?> 'group1' is my grouping parameter, declared above. We need the XPATH expression to find the column in the XML structure we want to group that matches the one passed by the parameter. Its essentially looking through the data tree for a match. We can show the actual grouping value in the report output with a similar XPATH expression <?./*[name(.) = $group1]?> In my example, I took things a little further so that I could have a dynamic label for the parameter value. For instance if I am using MANAGER as the parameter I want to show: Manager: Tim Dexter My XML elements are readable e.g. DEPARTMENT_NAME. Its a simple case of replacing the underscore with a space and then 'initcapping' the result: <?xdoxslt:init_cap(translate($group1,'_',' '))?> With this in place, the user can now select a grouping column in the BIP report viewer and the layout will re-group the data and any calculations based on that column. I built a group above report but you could equally build the group left version to truly mimic the Answers column selector. If you are interested you can get an example report, sample data and layout template here. Of course, you can combine Klaus' dynamic sorting, Kan's conditional column approach and this dynamic grouping to build a real kick ass report for users that will keep them happy for hours..

    Read the article

  • SQL SERVER – SSMS: Backup and Restore Events Report

    - by Pinal Dave
    A DBA wears multiple hats and in fact does more than what an eye can see. One of the core task of a DBA is to take backups. This looks so trivial that most developers shrug this off as the only activity a DBA might be doing. I have huge respect for DBA’s all around the world because even if they seem cool with all the scripting, automation, maintenance works round the clock to keep the business working almost 365 days 24×7, their worth is knowing that one day when the systems / HDD crashes and you have an important delivery to make. So these backup tasks / maintenance jobs that have been done come handy and are no more trivial as they might seem to be as considered by many. So the important question like: “When was the last backup taken?”, “How much time did the last backup take?”, “What type of backup was taken last?” etc are tricky questions and this report lands answers to the same in a jiffy. So the SSMS report, we are talking can be used to find backups and restore operation done for the selected database. Whenever we perform any backup or restore operation, the information is stored in the msdb database. This report can utilize that information and provide information about the size, time taken and also the file location for those operations. Here is how this report can be launched.   Once we launch this report, we can see 4 major sections shown as listed below. Average Time Taken For Backup Operations Successful Backup Operations Backup Operation Errors Successful Restore Operations Let us look at each section next. Average Time Taken For Backup Operations Information shown in “Average Time Taken For Backup Operations” section is taken from a backupset table in the msdb database. Here is the query and the expanded version of that particular section USE msdb; SELECT (ROW_NUMBER() OVER (ORDER BY t1.TYPE))%2 AS l1 ,       1 AS l2 ,       1 AS l3 ,       t1.TYPE AS [type] ,       (AVG(DATEDIFF(ss,backup_start_date, backup_finish_date)))/60.0 AS AverageBackupDuration FROM backupset t1 INNER JOIN sys.databases t3 ON ( t1.database_name = t3.name) WHERE t3.name = N'AdventureWorks2014' GROUP BY t1.TYPE ORDER BY t1.TYPE On my small database the time taken for differential backup was less than a minute, hence the value of zero is displayed. This is an important piece of backup operation which might help you in planning maintenance windows. Successful Backup Operations Here is the expanded version of this section.   This information is derived from various backup tracking tables from msdb database.  Here is the simplified version of the query which can be used separately as well. SELECT * FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name) LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id) WHERE (t1.name = N'AdventureWorks2014') ORDER BY backup_start_date DESC,t3.backup_set_id,t6.physical_device_name; The report does some calculations to show the data in a more readable format. For example, the backup size is shown in KB, MB or GB. I have expanded first row by clicking on (+) on “Device type” column. That has shown me the path of the physical backup file. Personally looking at this section, the Backup Size, Device Type and Backup Name are critical and are worth a note. As mentioned in the previous section, this section also has the Duration embedded inside it. Backup Operation Errors This section of the report gets data from default trace. You might wonder how. One of the event which is tracked by default trace is “ErrorLog”. This means that whatever message is written to errorlog gets written to default trace file as well. Interestingly, whenever there is a backup failure, an error message is written to ERRORLOG and hence default trace. This section takes advantage of that and shows the information. We can read below message under this section, which confirms above logic. No backup operations errors occurred for (AdventureWorks2014) database in the recent past or default trace is not enabled. Successful Restore Operations This section may not be very useful in production server (do you perform a restore of database?) but might be useful in the development and log shipping secondary environment, where we might be interested to see restore operations for a particular database. Here is the expanded version of the section. To fill this section of the report, I have restored the same backups which were taken to populate earlier sections. Here is the simplified version of the query used to populate this output. USE msdb; SELECT * FROM restorehistory t1 LEFT OUTER JOIN restorefile t2 ON ( t1.restore_history_id = t2.restore_history_id) LEFT OUTER JOIN backupset t3 ON ( t1.backup_set_id = t3.backup_set_id) WHERE t1.destination_database_name = N'AdventureWorks2014' ORDER BY restore_date DESC,  t1.restore_history_id,t2.destination_phys_name Have you ever looked at the backup strategy of your key databases? Are they in sync and do we have scope for improvements? Then this is the report to analyze after a week or month of maintenance plans running in your database. Do chime in with what are the strategies you are using in your environments. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

    Read the article

  • Microsoft, jQuery, and Templating

    - by Stephen Walther
    About two months ago, John Resig and I met at Café Algiers in Harvard square to discuss how Microsoft can contribute to the jQuery project. Today, Scott Guthrie announced in his second-day MIX keynote that Microsoft is throwing its weight behind jQuery and making it the primary way to develop client-side Ajax applications using Microsoft technologies. What does this announcement mean? It means that Microsoft is shifting its resources to invest in jQuery. Developers on the ASP.NET team are now working full-time to contribute features to the core jQuery library. Furthermore, we are working with other teams at Microsoft to ensure that our technologies work great with jQuery. We are contributing to the open-source jQuery project in the exact same way that any other company or individual from the community can contribute to jQuery. We are writing proposals, submitting the proposals to the jQuery forums, and revising the proposals in response to community feedback. The jQuery team can decide to reject or accept any feature that we propose. Any feature that Microsoft contributes to jQuery will be platform neutral. In other words, Microsoft contributions will benefit PHP and RAILS developers just as much as they benefit ASP.NET developers. Microsoft contributions to jQuery will improve the web for everyone. Contributing Support for Templates to jQuery Core Our first proposal concerns templating. We want to contribute support for templates to jQuery so that JavaScript developers can use jQuery to easily display a set of database records. You can read our templating proposal here: http://wiki.github.com/nje/jquery/jquery-templates-proposal You can download and play with our prototype for templating here: http://github.com/nje/jquery-tmpl The following code illustrates how you can use a template to display a set of products in a bulleted list: <script type="text/javascript"> jQuery(function(){ var products = [ { name: "Product 1", price: 12.99}, { name: "Product 2", price: 9.99}, { name: "Product 3", price: 35.59} ]; $("ul").append("#template", products); }); </script> <script id="template" type="text/html"> <li>{%= name %} - {%= price %}</li> </script> <ul></ul> The template is contained in a SCRIPT element that has a TYPE=”text/html” attribute. Browsers ignore the contents of a SCRIPT element when they don’t understand the content type. Notice that the placeholder {%=...%} is used within the template to indicate where the name and price of a product should appear. The delimiters {%=…%} are used for expressions and the delimiters {%...%} are used for code. Finally, the products are rendered using the template with the call to $(“ul”).append(“#template”, products). The standard jQuery DOM manipulation methods have been modified to support templates. When the page above is rendered, you get the bulleted list displayed in the following figure. Our goal is to keep our proposal for templates as simple as possible. After support for templating has been added to jQuery, plug-in authors can take advantage of templating when building complex data-driven plug-ins such as a DataGrid plug-in. The Ajax Control Toolkit Over 100,000 developers download the Ajax Control Toolkit every month. That’s a mind-boggling number of downloads. We realize that the Ajax Control Toolkit is extremely popular among ASP.NET Web Forms developers and we want to continue to invest in the Ajax Control Toolkit. If you are adding JavaScript interactivity to an ASP.NET Web Forms application, and you don’t want to write JavaScript, then we recommend that you use the server controls in the Ajax Control Toolkit. Using the Ajax Control Toolkit does not require knowledge of JavaScript and the toolkit enables you to build applications with the concepts familiar to ASP.NET Web Forms applications developers. If, however, you are interested in creating client-side interactivity without server controls then we recommend that you use jQuery. We plan to continue to release new versions of the Ajax Control Toolkit every few months. Our goal is to continue to improve the quality of the Ajax Control Toolkit and to make it easier for the community to contribute code, bug fixes, and documentation. The ASP.NET Ajax Library We are moving the ASP.NET Ajax Library into the Ajax Control Toolkit. If you currently use ASP.NET Ajax Library client templates, client data-binding, or the client script loader then you can continue to use these features by downloading the Ajax Control Toolkit. Be aware that our focus with the Ajax Control Toolkit is server-side Ajax.  For client-side Ajax, we are shifting our focus to jQuery. For example, if you have been using ASP.NET Ajax Library client templates then we recommend that you shift to using jQuery instead. Conclusion Our plan is to focus on jQuery as the primary technology for building client-side Ajax applications moving forward. We want to adapt Microsoft technologies to work great with jQuery and we want to contribute features to jQuery that will make the web better for everyone. We are very excited to be working with the jQuery core team.

    Read the article

  • How to deploy Document Set using CAML in SharePoint2010 solution package

    - by ybbest
    In my last post, I showed you how to use Document Set using SharePoint UI in the browser. In this post, I’d like to show you how to create the same Document Set using CAML and SharePoint solution package. You can download the complete solution here. 1. Create the Application Number site column using the SharePoint empty element item template in VS2010 <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <Field Type="Text" DisplayName="ApplicationNumber" Required="FALSE" EnforceUniqueValues="FALSE" Indexed="FALSE" MaxLength="255" Group="YBBEST" ID="{916bf3af-5ec1-4441-acd8-88ff62ab1b7e}" Name="ApplicationNumber" ></Field> </Elements> 2. Create the Loan Application Form and Loan Contract Form content types. <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x0101005dfbf820ce3c49f69c73a00e0e0e53f6" Name="Loan Contract Form" Group="YBBEST" Description="Loan Contract Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> <!-- Parent ContentType: Document (0x0101) --> <ContentType ID="0x010100f3016e3d03454b93bc4d6ab63941c0d2" Name="Loan Application Form" Group="YBBEST" Description="Loan Application Form" Inherits="TRUE" Version="0"> <FieldRefs> <FieldRef ID="916bf3af-5ec1-4441-acd8-88ff62ab1b7e" Name="ApplicationNumber" DisplayName="ApplicationNumber" /> </FieldRefs> </ContentType> </Elements> 3. Create the Loan Application Document Set. 4. Create the Document Set Welcome Page using the SharePoint Module item template. Notes: 1.When creating document set content type , you need to set the  Inherits=”FALSE”  or remove the  Inherits=”TRUE” from the content type definition (default is  Inherits=”FALSE”) . This is the Document Set limitation in the current version of SharePoint2010. Because of this , you also need to manually  attach the event receiver and  Document Set welcome page to your custom Document Set Content Type. 2. Shared Fields are push down only: 3. Not available in SharePoint foundation (only SharePoint Server 2010). 4. You can’t have folders within document sets (you can place document sets in folders though). For a complete limitation and considerations , you can see the references for details. References: Document Set Limitations and Considerations in SharePoint 2010 1 Document Set Limitations and Considerations in SharePoint 2010 2 Document Sets planning (SharePoint Server 2010) Import Document Sets Issue http://msdn.microsoft.com/en-us/library/gg581064.aspx http://channel9.msdn.com/Events/TechEd/NorthAmerica/2010/OSP305 DocumentSet Class

    Read the article

  • Internet Explorer and Cookie Domains

    - by Rick Strahl
    I've been bitten by some nasty issues today in regards to using a domain cookie as part of my FormsAuthentication operations. In the app I'm currently working on we need to have single sign-on that spans multiple sub-domains (www.domain.com, store.domain.com, mail.domain.com etc.). That's what a domain cookie is meant for - when you set the cookie with a Domain value of the base domain the cookie stays valid for all sub-domains. I've been testing the app for quite a while and everything is working great. Finally I get around to checking the app with Internet Explorer and I start discovering some problems - specifically on my local machine using localhost. It appears that Internet Explorer (all versions) doesn't allow you to specify a domain of localhost, a local IP address or machine name. When you do, Internet Explorer simply ignores the cookie. In my last post I talked about some generic code I created to basically parse out the base domain from the current URL so a domain cookie would automatically used using this code:private void IssueAuthTicket(UserState userState, bool rememberMe) { FormsAuthenticationTicket ticket = new FormsAuthenticationTicket(1, userState.UserId, DateTime.Now, DateTime.Now.AddDays(10), rememberMe, userState.ToString()); string ticketString = FormsAuthentication.Encrypt(ticket); HttpCookie cookie = new HttpCookie(FormsAuthentication.FormsCookieName, ticketString); cookie.HttpOnly = true; if (rememberMe) cookie.Expires = DateTime.Now.AddDays(10); var domain = Request.Url.GetBaseDomain(); if (domain != Request.Url.DnsSafeHost) cookie.Domain = domain; HttpContext.Response.Cookies.Add(cookie); } This code works fine on all browsers but Internet Explorer both locally and on full domains. And it also works fine for Internet Explorer with actual 'real' domains. However, this code fails silently for IE when the domain is localhost or any other local address. In that case Internet Explorer simply refuses to accept the cookie and fails to log in. Argh! The end result is that the solution above trying to automatically parse the base domain won't work as local addresses end up failing. Configuration Setting Given this screwed up state of affairs, the best solution to handle this is a configuration setting. Forms Authentication actually has a domain key that can be set for FormsAuthentication so that's natural choice for the storing the domain name: <authentication mode="Forms"> <forms loginUrl="~/Account/Login" name="gnc" domain="mydomain.com" slidingExpiration="true" timeout="30" xdt:Transform="Replace"/> </authentication> Although I'm not actually letting FormsAuth set my cookie directly I can still access the domain name from the static FormsAuthentication.CookieDomain property, by changing the domain assignment code to:if (!string.IsNullOrEmpty(FormsAuthentication.CookieDomain)) cookie.Domain = FormsAuthentication.CookieDomain; The key is to only set the domain when actually running on a full authority, and leaving the domain key blank on the local machine to avoid the local address debacle. Note if you want to see this fail with IE, set the domain to domain="localhost" and watch in Fiddler what happens. Logging Out When specifying a domain key for a login it's also vitally important that that same domain key is used when logging out. Forms Authentication will do this automatically for you when the domain is set and you use FormsAuthentication.SignOut(). If you use an explicit Cookie to manage your logins or other persistant value, make sure that when you log out you also specify the domain. IOW, the expiring cookie you set for a 'logout' should match the same settings - name, path, domain - as the cookie you used to set the value.HttpCookie cookie = new HttpCookie("gne", ""); cookie.Expires = DateTime.Now.AddDays(-5); // make sure we use the same logic to release cookie var domain = Request.Url.GetBaseDomain(); if (domain != Request.Url.DnsSafeHost) cookie.Domain = domain; HttpContext.Response.Cookies.Add(cookie); I managed to get my code to do what I needed it to, but man I'm getting so sick and tired of fixing IE only bugs. I spent most of the day today fixing a number of small IE layout bugs along with this issue which took a bit of time to trace down.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • How to install Oracle Weblogic Server using OS-specific Package installer?(Linux/Solaris)

    - by PratikS -- Oracle
    Note: OS-specific Package installer As the name suggests the installer is platform specific. It is meant for installation with a 32bit JVM only. Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. There are three different ways of installing Oracle Weblogic Server: Graphical mode Console mode Silent mode For Linux/Solaris: Steps to install OS-specific Package .bin installer(for Linux/Solaris) are almost same as windows except for the way we launch the installation.Installer: wls_<version>_<linux/solaris>32.bin (E.g. wls1036_linux32.bin/wls1036_solaris32.bin) 1) Graphical mode: Log in to the target UNIX system. Go to the directory that contains the installation program.(Make sure GUI is enabled or else it will default to console mode) Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 oracle oracle 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin As soon as you run ./wls1036_linux32.bin with GUI enabled you would see the following screen: Rest of the screens and steps are similar to that of Graphical mode installation on windows, refer: How to install Oracle Weblogic Server using OS-specific Package installer?(Windows) 2) Console mode: Log in to the target UNIX system. Go to the directory that contains the installation program. Launch the installation by entering the following commands: [weblogic@pratik ~]$ pwd/home/oracle[weblogic@pratik ~]$ cd WLSInstallers/[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rw-rw-r-- 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851512-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin [weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=consoleExtracting 0%....................................................................................................100%<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Welcome:--------This installer will guide you through the installation of WebLogic 10.3.6.0.Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".Enter [Exit][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:--------------------------------- ->1|* Create a new Middleware Home   2|/home/oracle/wls_12cEnter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [Enter new value or use default"/home/oracle/Oracle/Middleware"]Enter new Middleware Home OR [Exit][Previous][Next]> /home/oracle/WLS1036<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [/home/oracle/WLS1036]Use above value or select another option:    1 - Enter new Middleware Home    2 - Change to default [/home/oracle/Oracle/Middleware]Enter option number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[Yes]Enter index number to select OR [Exit][Previous][Next]> 3<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]Enter [Yes][No]? No<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]    ** Do you wish to bypass initiation of the configuration manager and    **  remain uninformed of critical security issues in your configuration?Enter [Yes][No]? Yes<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1|Email:[]   2|Support Password:[]   3|Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Install Type:--------------------Select the type of installation you wish to perform. ->1|Typical    |  Install the following product(s) and component(s):    | - WebLogic Server    | - Oracle Coherence   2|Custom    |  Choose software products and components to install and perform optional    |configuration.Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Product Installation Directories:----------------------------------------Middleware Home Directory: [/home/oracle/WLS1036]Product Installation Directories:   1|WebLogic Server: [/home/oracle/WLS1036/wlserver_10.3]   2|Oracle Coherence: [/home/oracle/WLS1036/coherence_3.7]Enter index number to select OR [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->The following Products and JDKs will be installed:--------------------------------------------------    WebLogic Platform 10.3.6.0    |_____WebLogic Server    |    |_____Core Application Server    |    |_____Administration Console    |    |_____Configuration Wizard and Upgrade Framework    |    |_____Web 2.0 HTTP Pub-Sub Server    |    |_____WebLogic SCA    |    |_____WebLogic JDBC Drivers    |    |_____Third Party JDBC Drivers    |    |_____WebLogic Server Clients    |    |_____WebLogic Web Server Plugins    |    |_____UDDI and Xquery Support    |    |_____Evaluation Database    |_____Oracle Coherence    |    |_____Coherence Product Files    |_____JDKs         |_____SUN SDK 1.6.0_29         |_____Oracle JRockit 1.6.0_29 SDK    *Estimated size of installation: 1,276.0 MBEnter [Exit][Previous][Next]> Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing files..0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing JDK....0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Performing String Substitutions...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Configuring OCM...0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Creating Domains...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installation CompleteCongratulations! Installation is complete.Press [Enter] to continue or type [Exit]> [weblogic@pratik ~]$ Note: All the inputs are in Bold 3) Silent mode:              1) Log in to the target Unix system.             2) Create a silent.xml file that defines the configuration settings normally entered by a user during an interactive installation process, such as graphical-mode or console-mode installation. <?xml version="1.0" encoding="UTF-8"?><bea-installer>     <input-fields>        <data-value name="BEAHOME" value="/home/oracle/WLS1036" />        <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />        <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />    </input-fields></bea-installer> <!-- Note: This sample silent.xml file is used to install all the components of WebLogic Server and Oracle Coherence. All the values in Bold are the variables. -->               3) Place the silent.xml file in the same directory as where the WebLogic Server Package installer is located.              4) Go to the directory that contains the installation program.              5) Start the installer as follows: [weblogic@pratik WLSInstallers]$ chmod a+x wls1036_linux32.bin[weblogic@pratik WLSInstallers]$ ls -ltrtotal 851516-rwxrwxr-x 1 weblogic weblogic 871091023 Dec 22  2011 wls1036_linux32.bin-rw-rw-r-- 1 weblogic weblogic       331 Jul  5 03:48 silent.xml[weblogic@pratik WLSInstallers]$ cat silent.xml<?xml version="1.0" encoding="UTF-8"?><bea-installer>        <input-fields>                <data-value name="BEAHOME" value="/home/oracle/WLS1036" />                <data-value name="WLS_INSTALL_DIR" value="/home/oracle/WLS1036/wlserver_10.3" />                <data-value name="COMPONENT_PATHS" value="WebLogic Server|Oracle Coherence" />        </input-fields></bea-installer>[weblogic@pratik WLSInstallers]$ ./wls1036_linux32.bin -mode=silenlent.xml -log=/home/oracle/WLSInstallers/install.logExtracting 0%....................................................................................................100%[weblogic@pratik WLSInstallers]$ -log=/home/oracle/WLSInstallers/install.log creates a installation log(install.log) under "/home/oracle/WLSInstallers/", when installation completes you will see the following printed in the log file: 2012-07-05 03:59:36,788 INFO  [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull! For other configurable values in silent.xml refer: Values for the Sample silent.xml File for WebLogic Server Important links to Refer: Running the Installation Program in Graphical Mode Running the Installation Program in Console Mode Running the Installation Program in Silent Mode

    Read the article

  • MVVM in Task-It

    As I'm gearing up to write a post about dynamic XAP loading with MEF, I'd like to first talk a bit about MVVM, the Model-View-ViewModel pattern, as I will be leveraging this pattern in my future posts. Download Source Code Why MVVM? Your first question may be, "why do I need this pattern? I've been using a code-behind approach for years and it works fine." Well, you really don't have to make the switch to MVVM, but let me first explain some of the benefits I see for doing so. MVVM Benefits Testability - This is the one you'll probably hear the most about when it comes to MVVM. Moving most of the code from your code-behind to a separate view model class means you can now write unit tests against the view model without any knowledge of a view (UserControl). Multiple UIs - Let's just say that you've created a killer app, it's running in the browser, and maybe you've even made it run out-of-browser. Now what if your boss comes to you and says, "I heard about this new Windows Phone 7 device that is coming out later this year. Can you start porting the app to that device?". Well, now you have to create a new UI (UserControls, etc.) because you have a lot less screen real estate to work with. So what do you do, copy all of your existing UserControls, paste them, rename them, and then start changing the code? Hmm, that doesn't sound so good. But wait, if most of the code that makes your browser-based app tick lives in view model classes, now you can create new view (UserControls) for Windows Phone 7 that reference the same view model classes as your browser-based app. Page state - In Silverlight you're at some point going to be faced with the same issue you dealt with for years in ASP.NET, maintaining page state. Let's say a user hits your Products page, does some stuff (filters record, etc.), then leaves the page and comes back later. It would be best if the Products page was in the same state as when they left it right? Well, if you've thrown away your view (UserControl or Page) and moved off to another part of the UI, when you come back to Products you're probably going to re-instantiate your view...which will put it right back in the state it was when it started. Hmm, not good. Well, with a little help from MEF you can store the state in your view model class, MEF will keep that view model instance hanging around in memory, and then you simply rebind your view to the view model class. I made that sound easy, but it's actually a bit of work to properly store and restore the state. At least it can be done though, which will make your users a lot happier! I'll talk more about this in an upcoming blog post. No event handlers? Another nice thing about MVVM is that you can bind your UserControls to the view model, which may eliminate the need for event handlers in your code-behind. So instead of having a Click handler on a Button (or RadMenuItem), for example, you can now bind your control's Command property to a DelegateCommand in your view model (I'll talk more about Commands in an upcoming post). Instead of having a SelectionChanged event handler on your RadGridView you can now bind its SelectedItem property to a property in your view model, and each time the user clicks a row, the view model property's setter will be called. Now through the magic of binding we can eliminate the need for traditional code-behind based event handlers on our user interface controls, and the best thing is that the view model knows about everything that's going on...which means we can test things without a user interface. The brains of the operation So what we're seeing here is that the view is now just a dumb layer that binds to the view model, and that the view model is in control of just about everything, like what happens when a RadGridView row is selected, or when a RadComboBoxItem is selected, or when a RadMenuItem is clicked. It is also responsible for loading data when the page is hit, as well as kicking off data inserts, updates and deletions. Once again, all of this stuff can be tested without the need for a user interface. If the test works, then it'll work regardless of whether the user is hitting the browser-based version of your app, or the Windows Phone 7 version. Nice! The database Before running the code for this app you will need to create the database. First, create a database called MVVMProject in SQL Server, then run MVVMProject.sql in the MVVMProject/Database directory of your downloaded .zip file. This should give you a Task table with 3 records in it. When you fire up the solution you will also need to update the connection string in web.config to point to your database instead of IBM12\SQLSERVER2008. The code One note about this code is that it runs against the latest Silverlight 4 RC and WCF RIA Services code. Please see my first blog post about updating to the RC bits. Beta to RC - Part 1 At the top of this post is a link to a sample project that demonstrates a sample application with a Tasks page that uses the MVVM pattern. This is a simplified version of how I have implemented the Tasks page in the Task-It application. Youll notice that Tasks.xaml has very little code to it. Just a TextBlock that displays the page title and a ContentControl. <StackPanel>     <TextBlock Text="Tasks" Style="{StaticResource PageTitleStyle}"/>     <Rectangle Style="{StaticResource StandardSpacerStyle}"/>     <ContentControl x:Name="ContentControl1"/> </StackPanel> In List.xaml we have a RadGridView. Notice that the ItemsSource is bound to a property in the view model class call Tasks, SelectedItem is bound to a property in the view model called SelectedItem, and IsBusy is bound to a property in the view model called IsLoading. <Grid>     <telerikGridView:RadGridView ItemsSource="{Binding Tasks}" SelectedItem="{Binding SelectedItem, Mode=TwoWay}"                                  IsBusy="{Binding IsLoading}" AutoGenerateColumns="False" IsReadOnly="True" RowIndicatorVisibility="Collapsed"                IsFilteringAllowed="False" ShowGroupPanel="False">         <telerikGridView:RadGridView.Columns>             <telerikGridView:GridViewDataColumn Header="Name" DataMemberBinding="{Binding Name}" Width="3*"/>             <telerikGridView:GridViewDataColumn Header="Due" DataMemberBinding="{Binding DueDate}" DataFormatString="{}{0:d}" Width="*"/>         </telerikGridView:RadGridView.Columns>     </telerikGridView:RadGridView> </Grid> In Details.xaml we have a Save button that is bound to a property called SaveCommand in our view model. We also have a simple form (Im using a couple of controls here from Silverlight.FX for the form layout, FormPanel and Label simply because they make for a clean XAML layout). Notice that the FormPanel is also bound to the SelectedItem in the view model (the same one that the RadGridView is). The two form controls, the TextBox and RadDatePicker) are bound to the SelectedItem's Name and DueDate properties. These are properties of the Task object that WCF RIA Services creates. <StackPanel>     <Button Content="Save" Command="{Binding SaveCommand}" HorizontalAlignment="Left"/>     <Rectangle Style="{StaticResource StandardSpacerStyle}"/>     <fxui:FormPanel DataContext="{Binding SelectedItem}" Style="{StaticResource FormContainerStyle}">         <fxui:Label Text="Name:"/>         <TextBox Text="{Binding Name, Mode=TwoWay}"/>         <fxui:Label Text="Due:"/>         <telerikInput:RadDatePicker SelectedDate="{Binding DueDate, Mode=TwoWay}"/>     </fxui:FormPanel> </StackPanel> In the code-behind of the Tasks control, Tasks.xaml.cs, I created an instance of the view model class (TasksViewModel) in the constructor and set it as the DataContext for the control. The Tasks page will load one of two child UserControls depending on whether you are viewing the list of tasks (List.xaml) or the form for editing a task (Details.xaml). // Set the DataContext to an instance of the view model class var viewModel = new TasksViewModel(); DataContext = viewModel;   // Child user controls (inherit DataContext from this user control) List = new List(); // RadGridView Details = new Details(); // Form When the page first loads, the List is loaded into the ContentControl. // Show the RadGridView first ContentControl1.Content = List; In the code-behind we also listen for a couple of the view models events. The ItemSelected event will be fired when the user clicks on a record in the RadGridView in the List control. The SaveCompleted event will be fired when the user clicks Save in the Details control (the form). Here the view model is in control, and is letting the view know when something needs to change. // Listeners for the view model's events viewModel.ItemSelected += OnItemSelected; viewModel.SaveCompleted += OnSaveCompleted; The event handlers toggle the view between the RadGridView (List) and the form (Details). void OnItemSelected(object sender, RoutedEventArgs e) {     // Show the form     ContentControl1.Content = Details; }   void OnSaveCompleted(object sender, RoutedEventArgs e) {     // Show the RadGridView     ContentControl1.Content = List; } In TasksViewModel, we instantiate a DataContext object and a SaveCommand in the constructor. DataContext is a WCF RIA Services object that well use to retrieve the list of Tasks and to save any changes to a task. Ill talk more about this and Commands in future post, but for now think of the SaveCommand as an event handler that is called when the Save button in the form is clicked. DataContext = new DataContext(); SaveCommand = new DelegateCommand(OnSave); When the TasksViewModel constructor is called we also make a call to LoadTasks. This sets IsLoading to true (which causes the RadGridViews busy indicator to appear) and retrieves the records via WCF RIA Services.         public LoadOperation<Task> LoadTasks()         {             // Show the loading message             IsLoading = true;             // Get the data via WCF RIA Services. When the call has returned, called OnTasksLoaded.             return DataContext.Load(DataContext.GetTasksQuery(), OnTasksLoaded, false);         } When the data is returned, OnTasksLoaded is called. This sets IsLoading to false (which hides the RadGridViews busy indicator), and fires property changed notifications to the UI to let it know that the IsLoading and Tasks properties have changed. This property changed notification basically tells the UI to rebind. void OnTasksLoaded(LoadOperation<Task> lo) {     // Hide the loading message     IsLoading = false;       // Notify the UI that Tasks and IsLoading properties have changed     this.OnPropertyChanged(p => p.Tasks);     this.OnPropertyChanged(p => p.IsLoading); } Next lets look at the view models SelectedItem property. This is the one thats bound to both the RadGridView and the form. When the user clicks a record in the RadGridView its setter gets called (set a breakpoint and see what I mean). The other code in the setter lets the UI know that the SelectedItem has changed (so the form displays the correct data), and fires the event that notifies the UI that a selection has occurred (which tells the UI to switch from List to Details). public Task SelectedItem {     get { return _selectedItem; }     set     {         _selectedItem = value;           // Let the UI know that the SelectedItem has changed (forces it to re-bind)         this.OnPropertyChanged(p => p.SelectedItem);         // Notify the UI, so it can switch to the Details (form) page         NotifyItemSelected();     } } One last thing, saving the data. When the Save button in the form is clicked it fires the SaveCommand, which calls the OnSave method in the view model (once again, set a breakpoint to see it in action). public void OnSave() {     // Save the changes via WCF RIA Services. When the save is complete, call OnSaveCompleted.     DataContext.SubmitChanges(OnSaveCompleted, null); } In OnSave, we tell WCF RIA Services to submit any changes, which there will be if you changed either the Name or the Due Date in the form. When the save is completed, it calls OnSaveCompleted. This method fires a notification back to the UI that the save is completed, which causes the RadGridView (List) to show again. public virtual void OnSaveCompleted(SubmitOperation so) {     // Clear the item that is selected in the grid (in case we want to select it again)     SelectedItem = null;     // Notify the UI, so it can switch back to the List (RadGridView) page     NotifySaveCompleted(); } Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >