Search Results

Search found 16809 results on 673 pages for 'nothing 2 lose'.

Page 490/673 | < Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >

• very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

  - by gojira

  I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

  Read the article

• CentOS 5 : error in installing php-imap

  - by TMMDev

  can someone please help me with this CentOS 5 question? I am trying to install php-imap, i tried yum install php-imap but I am getting the following output: Loaded plugins: fastestmirror, priorities, security Loading mirror speeds from cached hostfile * base: centos.hostingxtreme.com * epel: mirror.steadfast.net * extras: mirror.team-cymru.org * updates: mirror.beyondhosting.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-imap.x86_64 0:5.1.6-44.el5_10 set to be updated --> Processing Dependency: php-common = 5.1.6-44.el5_10 for package: php-imap --> Finished Dependency Resolution php-imap-5.1.6-44.el5_10.x86_64 from updates has depsolving problems --> Missing Dependency: php-common = 5.1.6-44.el5_10 is needed by package php-imap-5.1.6-44.el5_10.x86_64 (updates) Error: Missing Dependency: php-common = 5.1.6-44.el5_10 is needed by package php-imap-5.1.6-44.el5_10.x86_64 (updates) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. I already have php-common installed, I ran "yum install php-common" and got the following output Loaded plugins: fastestmirror, priorities, security Loading mirror speeds from cached hostfile * base: centos.hostingxtreme.com * epel: mirror.steadfast.net * extras: mirror.team-cymru.org * updates: mirror.beyondhosting.net Setting up Install Process Package matching php-common-5.1.6-44.el5_10.x86_64 already installed. Checking for update. Nothing to do how can I fix this problem?

  Read the article

• mod_rpaf problems with Nginx front, Apache back-end after Ubuntu upgrade

  - by Kenn

  I'm running an Nginx front-end for static files, and proxying to an Apache backend for PHP and Passenger, using Apache's mod_rpaf to set the correct remote IP address on the backend. Everything worked fine until I upgraded to Ubuntu 12.04 (Precise). Now Apache reports all connections coming from 127.0.0.1. Here's the relevant configuration. Nothing here changed with the upgrade. Nginx: proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; mod_rpaf: <IfModule mod_rpaf.c> RPAFenable On RPAFsethostname On RPAFproxy_ips 127.0.0.1 ::1 RPAFheader X-Forwarded-For </IfModule> I'm using %{X-Forwarded-For}i in my Apache LogFormat directive and the access logs are showing the correct remote address, so I know Nginx is passing the address along properly. In a phpinfo() test, HTTP_X_FORWARDED_FOR is showing the correct remote address, but REMOTE_ADDR is 127.0.0.1. This is reflected in PHP applications as well, such as WordPress comments. I've tried switching Nginx and mod_rpaf to X-Real-IP with no effect. Did something change that I missed? Relevant version info, everything installed from the Ubuntu repository: Nginx 1.1.19 Apache 2.2.22 mod_rpaf 0.6

  Read the article

• Emails not sending from outlook / OWA - Not even hitting the mail queue in exchange

  - by webnoob

  We are having an issue this morning where we can receive external emails but cannot send internal or external ones from Outlook or OWA. If I use: Send-MailMessage –From <[email protected]> –To <[email protected]> –Subject “Test #01”-Body “Just a test message.” –SMTPServer <Server-Name> –Credential <domain\user> the email is sent correctly which makes me think there is a connection issue with OWA and Outlook. However, outlook is reporting as Connected with exchange. I have checked the message tracking in exchange tools and emails sent via outlook and OWA do not appear. Nothing has changed on the server on the weekend so I don't really know where to start debugging this issue. We are using Windows SBS 2011. We only have one send connector which isn't using Smart Hosts and is set to use DNS MX records. Use external DNS is not checked and I can ping google.com etc so doesn't appear to be a DNS issue (plus the email sends from the console anyway). EDIT It appears that users using IMAP can send emails correctly, its only ones that rely on the normal exchange connection type that don't work. EDIT Emails from IMAP are hitting the email queue's where as emails from the normal exchange accounts aren't. EDIT It seems that some of the emails we tried to send yesterday sent at about 1am but now it won't work again..

  Read the article

• What's going on with traceroute?

  - by Kevin

  The following is what happens when I run traceroute from a certain location: # traceroute google.com traceroute to google.com (74.125.227.39), 30 hops max, 60 byte packets 1 gateway.local.enactpc.com (10.0.0.1) 0.138 ms 0.101 ms 0.084 ms 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * Absolutely nothing of interest... Now, originally I thought this was just a fact of the location's network set up. (I assume they block pings or something...) However, watch what happens when I use nmap to run a traceroute... # nmap -sP --traceroute google.com Starting Nmap 5.21 ( http://nmap.org ) at 2012-09-25 22:18 CDT Nmap scan report for google.com (74.125.227.40) Host is up (0.034s latency). Hostname google.com resolves to 11 IPs. Only scanned 74.125.227.40 rDNS record for 74.125.227.40: dfw06s06-in-f8.1e100.net TRACEROUTE (using proto 1/icmp) HOP RTT ADDRESS 1 0.19 ms gateway.local.enactpc.com (10.0.0.1) 2 1.93 ms 99-20-92-1.lightspeed.austtx.sbcglobal.net (99.20.92.1) 3 25.61 ms 99-20-92-2.lightspeed.austtx.sbcglobal.net (99.20.92.2) 4 ... 6 7 23.68 ms 12.83.68.137 8 31.30 ms gar23.dlstx.ip.att.net (12.122.85.73) 9 ... 10 31.82 ms 72.14.233.65 11 32.27 ms 209.85.250.77 12 32.98 ms dfw06s06-in-f8.1e100.net (74.125.227.40) Nmap done: 1 IP address (1 host up) scanned in 3.29 seconds When using nmap I get A LOT more results than with traceroute, why? Note, I checked, and the difference in target IP addresses is not related...

  Read the article

• Transcoding media server streaming to the iPhone

  - by pilif

  I have a huge collection of videos in different formats, but with one thing in common: They are not playable on an iPhone (or iPod Touch). Instead of complaining about Apple's IMHO broken world view ("there are no video formats but quicktime and mp4"), I wonder if there's a solution out there that allows streaming these different videos to the iPhone. This means that the source media needs to be transcoded on the fly. I already tried a few solutions out there, but with varying success: PS3 Media Server kind of worked, but only once and only for one single file. TVersity is said to work, but it requires UAC to be disabled and I don't see any need for this. The solution I'm looking for should run on Windows 2008 Server or Linux. I just can't believe that there's nothing out there that would allow me to stream my huge video collection on my iPhone (we're talking Wifi here, not 3G). After looking at the answers provided and after retrying TVersity without much success, I gave Orb another try and while the web interface failed to work for me, the iPhone Application (I tried the free one at first) actually worked flawlessly. And not only that, it also manages to convert the streams on-the-fly, so you don't have to wait for the transcoding process to finish before playback starts. On my 2.26 Ghz MacMini Server, this worked even with 1080p material. For Windows 2008 Server users out there: Remember to install the Desktop Experience Feature in the Server Manager if you intend this to work. Of all the stuff I had a look at, this really provided instant-success - even though I'm now probably sending the contents of my harddrive to orb's central server (sigh)

  Read the article

• Help with Ubuntu and Windows, separate HDs

  - by LuxuryMode

  Need some major help. Running a Dell XPS/Dimension 630i. It came with "SATA 2 RAID 0 With Dual 500GB Hard Drives." I have installed a new, third non-raided drive and installed Ubuntu on it. So now I have Windows on the original hard drive and Ubuntu Linux on the new HD. When I get to the boot menu where I can select an OS, if I select windows I get an error: "No such drive, no such disk." Also, strangely in the first place, in order to even get to the bootloader menu I have had to disable ALL ports under the RAID config. Unless I do this, I will just get to a never-ending blinking cursor. I have tried every conceivable CMOS config and nothing else works. Tried setting port 3 (the new HD w/ Ubuntu) to first hard disk boot priority. Tried disabling all other ports and enabling the Ubuntu HD port and vice versa. I have some pictures of boot up: first one is strange error i get after messing with CMOS to finally get ubuntu install to work. http://imgur.com/5sqJa then boot menu: http://imgur.com/TWtLq then error: http://imgur.com/TJ1mS. Also, please note that I can actually access all files from the raided Windows drive through Ubuntu.

  Read the article

• Unable to load Windows after using EasyBCD to Reset bcd [duplicate]

  - by johnny

  This question already has an answer here: How can I repair the Windows 8 EFI Bootloader? 9 answers My windows installation was working perfectly fine until i clicked "Reset BCD" in EasyBCD in Windows 8. After clicking that EasyBCD told me to add Win 8 entry via Add Entry Menu so i did. After restart, win 8 would not start. Neither would recovery F11. Attempts i made to Restore : Ran boot-repair from ubuntu live cd several time. Used Win8 system recovery disc created via virtualbox with win 8 preview iso. Automated repair from Win8 system recovery disc Ran following commands from cmd started from Win8 system recovery disc bootrec /fixmbr Result : Success message bootrec /rebuildbcd Result : after hitting (Y) "The requested system device cannot be found" System refresh started from Win8 system recovery disc gives error that device is locked. System reset started from Win8 system recovery disc gives error that required partition or device is missing or not accessible. Used automated repair from EasyRE disc. It gave success message. Used Fix boot problem from Macrium reflect winPE repair disc. Copied Recovery partition to usb. Booting from usb gave this error Your PC needs to be repaired. Error Code : 0XC000000f Press Enter to try again Press F8 for Startup Settings F8 & Enter does nothing I cannot install WIn7 or Win 8, error it gives : "windows cannot be installed on this disk. The selected disk is of the GPT partition style."

  Read the article

• Hadoop streaming job on EC2 stays in "pending" state

  - by liamf

  Trying to experiment with Hadoop and Streaming using cloudera distribution CDH3 on Ubuntu. Have valid data in hdfs:// ready for processing. Wrote little streaming mapper in python. When I launch a mapper only job using: hadoop jar /usr/lib/hadoop/contrib/streaming/hadoop-streaming*.jar -file /usr/src/mystuff/mapper.py -mapper /usr/src/mystuff/mapper.py -input /incoming/STBFlow/* -output testOP hadoop duly decides it will use 66 mappers on the cluster to process the data. The testOP directory is created on HDFS. A job_conf.xml file is created. But the job tracker UI at port 50030 never shows the job moving out of "pending" state and nothing else happens. CPU usage stays at zero. (the job is created though) If I give it a single file (instead of the entire directory) as input, same result (except Hadoop decides it needs 2 mappers instead of 66). I also tried using the "dumbo" Python utility and launching jobs using that: same result: permanently pending. So I am missing something basic: could someone help me out with what I should look for? The cluster is on Amazon EC2. Firewall issues maybe: ports are enabled explicitly, case by case, in the cluster security group.

  Read the article

• How to configure a large mtu (linux)

  - by Somejan

  I have a gigabit ethernet connection from my laptop to my router, and a working ipv6 connection to the internet. I can receive very large packets from sites on the internet, with sizes up to at least 10000 bytes (according to wireshark). (edit: turns out to be linux's 'generic receive offload') However, when trying to send anything, my local computer fragments at just below 1500 bytes for ipv6. (On ipv4, I can send tcp packets to the internet of at least 1514 bytes, I can ping with packets up to the configured mtu of 6128 but they are blackholed.) I'm on ubuntu 12.04. I have configured an mtu for my eth0 of 6128 (the maximum it accepts), both using ip link set dev eth0 mtu 6128 and in the NetworkManager applet gui, and restarted the connection. ip link show eth0 shows the 6128 mtu is indeed set. ip -6 route shows that none of the paths the kernel knows about have an mtu set. I can ping over ipv4 with packets up to 6128 bytes (though I don't get responses), but when I do ping6 myrouter -c3 -s1500 -Mdo I get error replies from my own computer saying that the packets are too large and the mtu is 1480. I have confirmed with Wireshark that nothing is put on the wire, and the replies are indeed generated by my own computer. So, how do I get my computer to use the larger mtu?

  Read the article

• Windows Server 2008 ignores any change made to firewall

  - by Maurice Courtois

  I have been trying for the last 2 hours to make my Windows Server 2008 answer ping. I have tried almost every single solution I have found on the web, so far nothing work. My current setup: 2 NIC (1x Internet connection, 1x Local network) Server act as VPN server. So I set the corresponding NIC as either Public or Private. I also enable the rule for "File and Printer Sharing (Echo Request...)" for all Nic and from any IPs. I always been able to ping from the local network or the local ip while connected to the VPN. I also tried to create a specific rule for ICMP ping and disabling the firewall for all but the public nic. Regardless of all this, I still can't ping that server from Internet. Any idea suggestion what could cause this? I have the impression that when you set the server as VPN (I switch the box on when setting it up to block everything else than VPN connection) that changing anything to the firewall setting thought mmc is pointless !?!?

  Read the article

• mod_fcgi in virtualmin: graceful kill fail, sending SIGKILL?

  - by mgjk

  Yesterday around 1am, our server ground to a crawl. This doesn't happen often, but I'm trying to get to the bottom of it. There is no unusual traffic volume, no unusual processes running, just all of the sudden the server started killing fcgid processes. [Thu Aug 02 01:17:32 2012] [warn] mod_fcgid: process 26460 graceful kill fail, sending SIGKILL ... for as many fcgid processes as we have... CPU idle fell to 0% and I/O seemed to take up most of the load. The issue lasted about 5 minutes. I suspect there was some swap activity, although I'm not sure if it was due to killed processes being swapped in to die, or if it was because some process ramped up memory usage faster than my process watching scripts can see them. The oom-killer wasn't triggered (at least it's not logged), so I think this was Apache for some reason restarting the processes. This is not regular, and nothing obvious appears in cron. Is there a normal Apache process which might cause this? We run dozens of different sites, and it was late at night, so volume was very, very low. (maybe 200 requests in a 10 minute period).

  Read the article

• Problem uninstalling and installing Java on new pc running Windows 7 64 bit os

  - by Brian Gerrin

  I have a new Dell Studio XPS running Windows 7 64 bit os. I am attending online classes which require IE 8 and Java version 6 build 20. The pc came with IE 8 32 bit and Java 6 build 21 already installed. I tried to uninstall Java using add and remove programs but after about 45 minutes of "Preparing to remove application" I got an error refering to a missing dll file and the uninstall failed. I used a third party program to remove Java and downloaded Java 6 build 20. My problem is when I try to install it I get the box telling me "Installing program ... this may take a few minutes" however after 30 to 45 minutes nothing has happend and there is no indication in the progress bar that anything is happening then all of a sudden the program bar is full and the program is supposedly installed. When I try to run it however it doesn't work. Someone help please! I can't get access to my classwork with out this! Thanks

  Read the article

• Issue with exim4u

  - by bretterer

  I am using exim4u for a mail server on debian. Everything has been working fine until recently. I have not done anything to the server from the time it was working until now. I have a domain set up and is receiving and sending mail correctly. When i put a forwarding address in to a gmail address, I can still receive and send email from my webmail client but it never makes it to gmail. I have check logs and this is what I have found 2012-04-01 18:47:04 1SEPns-0000aN-Br DKIM: d=gmail.com s=20120113 c=relaxed/relaxed a=rsa-sha256 [verification succeeded] 2012-04-01 18:47:10 1SEPns-0000aN-Br H=mail-bk0-f43.google.com [209.85.214.43] Warning: X-Spam_score: -0.3 2012-04-01 18:47:10 1SEPns-0000aN-Br <= [email protected] H=mail-bk0-f43.google.com [209.85.214.43] P=esmtps X=TLS1.0:RSA_ARCFOUR_MD5:16 S=3424 id=CAGZkSKbYc7SJR+yXTgG8ubQvx4PNb0CwHG1DDKGeZ-qFiA$ 2012-04-01 18:47:11 1SEPns-0000aN-Br => /home/mail/mydomain.com/support/Maildir ([email protected]) <[email protected]> R=virtual_domains T=virtual_delivery 2012-04-01 18:47:12 1SEPns-0000aN-Br => [email protected] <[email protected]> R=dnslookup T=remote_smtp H=gmail-smtp-in.l.google.com [209.85.225.27] X=TLS1.0:RSA_ARCFOUR_SHA1:16 2012-04-01 18:47:12 1SEPns-0000aN-Br Completed I am not a mail server person so im not sure what everything here is saying. It appears to me that it is successfully sending mail to gmail though. I have checked my spam folder as well and nothing there either. If it would help to have some more information from my server, let me know because Im not sure what would be of help here.

  Read the article

• Intermittently uncommunicative subnets

  - by mhd

  Last week proved me a veritable Cassandra: I've always said that it's a bad idea to have only one firewall/router, without a backup or failover. And thus our Cisco PIX went haywire, refusing to route properly. And of course, the only one available here on short notice is me, and while I'm quite grounded in Linux, I'm really a developer not a sysadmin (the fact that this hit me on sysadmin appreciation day is a bit ironic). Anyway, this weekend I tried to hack up a temporary solution: I used an old server with enough NICs (two built-in, four on a card) to serve as a gateway and firewall. Due to some problems with the raid controller, I got only two router distros running, and between Untangle and Ebox I decided for the latter. Now everything is quite okay. I've got all the different subnets we've got here (all with separate switches) talking to each other and even to the internet (Cisco 2800 router, T1 lines). But from time to time (20-60 minute intervals), I get a total routing failure. Our main, office subnet can't talk to our server subnet and can't connect to the internet. This is not the end of a gradual slowdown, either everything's working perfectly or I get a total lack of communication for about two minutes each time. Now I'm a bit at wits end what to check. At least with the default EBox setup, nothing in /var/log shows anything weird and it doesn't exactly have lots of built-in monitoring tools. So I'm hoping someone here could give me some pointers about what to look out for. I did change the ethernet cable from the office switch to the firewall, with no results. I might change switches, although within the switch it seems to work ok enough. Edit: I'm not sure whether this is the sole cause of the problem, but after I noticed a few DHCP entries just before the last drop of connectivity, I tried to reproduce that. And alas, whenever I renew a DHCP connection, I can't access other subnets anymore. Running ISC DHCPD 3.0.6.

  Read the article

• Migrate Maildir between courier and dovecot servers

  - by DeaconDesperado

  I have several tarballs that make up all the previous emails for two or three accounts on a mail server. This machine we be shut down within a few weeks and so I need to migrate all the previously subscribed IMAP folders to the new server. The old machine ran Dovecot with exim and delivered all mail to a virtual user folder on the server in maildir format. The new machine uses courier and postfix, also configured to deliver through maildir. The new server is already setup and all clients are successfully logging in, the problem is migrating their old conversations. I've tried moving the old message files directly and deleting the imap db that records which messages have already been fetched, but nothing has been successful. The outlook clients present an error for every message saying that the "message can no longer be located on the server." Keeping the files chronologically sorted is not an object, I just need to migrate the old conversations over. Is there a way to do this in a batch operation that will allow the clients to login to the new server and treat these old messages as though they were new? What is the protocol for this kind of migration?

  Read the article

• Strange problem with Google Mail and IMAP on Outlook 2007

  - by Alex C.

  I work for a small non-profit organization. We have about 35 administrative employees who use e-mail. We're on a Windows network with a domain. Everyone is running XP Pro and Office 2007 with all updates/patches. We used to use POP3 mail through a local provider. However, we recently signed-up for a free Google Apps account, and we switched to IMAP mail through Google. Everyone uses Outlook 2007 as the client. For about ten days, everything was working fine. Yesterday afternoon, we suddenly developed a strange and annoying problem. Every time you send an e-mail message, a copy of your outgoing message shows up in your inbox. It's as if you're adding your own address to the CC: line of every message. Nothing has changed on our end. I was hoping that the problem was a temporary glitch that would resolve itself, but here we are about 24 hours later, and it's still happening. I searched Twitter, and there were a handful of vague messages about issues with Google mail and IMAP, but I didn't see any references to this specific problem. Any thoughts on what's going on here and how to fix it?

  Read the article

• how to diagnose a hard system seizure? Dell+Ubuntu

  - by rob

  I've got Ubuntu 9.10 on a Dell Vostro 420 desktop, a little over a year old, which I use for plain vanilla work stuff (email, web, terminal, text editor). Every now and then, at totally random times, it completely freezes on me. Hard. Mouse and keyboard stop working, cursor stops blinking, clock stops moving. All I can do is hold down the power button on the front of the box to shut it off. Sometimes it happens after several months of continuous uptime; sometimes it happens a few minutes after a reboot, while all I've done is open a terminal to look at log files, or maybe firefox to do a google search. Each time, there is nothing at all in /var/log/messages at the time of the crash. This makes it seem like a hardware problem, and indeed a few months ago I opened the box and wiggled everything and the problem went away for a while. But now it's back. I went in and checked everything, took out each RAM card and reseated. No luck. I ran all the system diagnostics (the long version) and everything passed with flying colors. Something is messed up in this box, but without any useful logs or failed tests, how in the world am I going to find it? And of course, Dell's not gonna help me cause I went and replaced Windows with Ubuntu. What steps would you take next to track down this problem?

  Read the article

• Strange network connectivity problem

  - by Marc

  Here is my network connectivity: cable modem | |(WAN) wrt54g (default gateway, 192.168.1.1) -- earth |(LAN) | Simple Switch1 | | | | | SimpleSwitch2- neptune | | | | mars mercury | |- venus | |- laptop | saturn (Windows AD DC) simpleSwitch2 was hanging off the wrt54g. I moved it to SW1 during troubleshooting. Nothing described below was any different. earth is connected via wireless to the wrt54g. I can ping from laptop to mars, neptune & mercury. I can ping from earth to venus, saturn & laptop. However, pinging mars, mercury or neptune from earth gives the following result. Pinging mars.XXX.XXX [192.168.1.105] with 32 bytes of data: Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Ping statistics for 192.168.1.105: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), .122 is the address of the machine from which I am pinging. earth is a Vista machine. Windows firewall is off. saturn is my DNS & DHCP server. Can anyone give me any ideas what the h*ll is going on? Clearly the topology is a factor And yes, I am a space geek.

  Read the article

• Why do I need a managed switch and which one should I buy?

  - by ascanio1

  I bought a 2nd router and I want both routers to have direct WAN access to the modem. One of the 2 routers directs VOIP traffic to a telephone line port. This VOIP service is provided by the cable carrier which also leases the modem & the router. The cable company technician told me that this VOIP line uses IPv6 addressing and therefore I must employ an IPv6 capable/compliant Giga Hub/Switch or my telephone line won't work anymore. Pls advise me (brand/model) an IPv6 compliant, 2 port, switch to purchase. Pls educate me: By reading this forum I thought that hubs broadcast traffic to all ports, regardless of which input/output is being used and so, theoretically, they have nothing to do with IP. Correct? Same story for unmanaged switches, where the only difference is that these latter devices route traffic only to those ports which are detected to be in use. Correct? I also understood that unmanaged switches route traffic simply by detecting hardware use and not by selecting specific IP traffic. Correct? Finally, there are managed switches which DO select traffic based on IP and, therefore, only these managed switches are involved with IPv6... Why would my cable company explicitly tell me, over and over, that I must use an IPv6 compliant switch? Why would they need a managed switch instead of an unmanaged one? Thanks in advance for helping me understand!

  Read the article

• How can I make WSUS less invasive for our users?

  - by Cypher

  We have WSUS pushing updates out to our user's workstations, and things are going relatively well with one annoying caveat: there seems to be an issue with a pop-up being displayed in front of some users informing them that their machine will be rebooted in 15 minutes, and they have nothing to say about it: This may be because they did not log out the prior night. Nevertheless, this is a bit too much and is very counter-productive for our users. Here is a bit about our environment: Our users are running Windows XP Pro and are part of an Active Directory Domain. WSUS is being applied via Group Policy. Here is a snapshot of the GPO that is enforcing the WSUS rules: Here is how I want WSUS to work (ideally - I'll take whatever can get me close): I want updates to automatically download and install every night. If a user is not logged in, I would like the machine to reboot. If a user is logged in, I would like their machine not to reboot, but instead wait until the next "installation period" where it can perform any other needed installations and reboot then (provided the a user account is not still logged in). If a user is to be prompted for reboot, it should only happen once per day (if possible), but every time they are prompted, they must have a way to postpone the reboot. I do not want users to be forced to restart their computer whenever the computer thinks it should happen (unless it's after an update installation and there are no logged in users). That doesn't seem productive to force a system restart in the midst of a person's workday. Is there something that I can do with the GPO that would help make WSUS less intrusive? Even if it gave the user an option to Restart Later - that would be better than what is happening now.

  Read the article

• Router reporting failed admin login attempts from home server

  - by jeffora

  I recently noticed in the logs of my home router that it relatively regularly lists the following entry: [admin login failure] from source 192.168.0.160, Monday, June 20,2011 18:13:25 192.168.0.160 is the internal address of my home server, running Windows Home Server 2011. Is there anyway I can find out what specifically is trying to login to the router? Or is there some explanation for this behaviour? (not sure if this belongs here or on superuser...) [Update] I've run both Wireshark and netmon for a while on my home server. Wireshark captured the traffic, but didn't really show anything useful (or nothing I could make use of). A simple HTTP GET request is sent from the server (192.168.0.160) to the router (192.168.0.1), from a seemingly random port (I've seen examples from 50068, 52883), and it appears to do it twice in quick succession (incrementing port by 1), about every hour. Running netstat around the time of the failure didn't show anything (probably too long after anyway). I tried using netmon as it categorises by process, so I thought it might show a corresponding process for the port. Unfortunately, this comes in under the 'unknown' category, meaning it's basically just a slower, less useful Wireshark. I know there's not much to go on here, but does this help in anyway?

  Read the article

• Can a Windows Domain play along with a Hosted Exchange service?

  - by benzado

  I'm setting up a computer network for a small (10-20 people) company. They are currently using a Hosted Exchange service they are totally happy with. Other than that, they are starting from scratch (office doesn't even have furniture yet). They will need some kind of file sharing server set up in their office. If I set up a machine as a file server and nothing more, users will have three passwords to deal with: local machine, file server, and email. If I set up a Domain Controller, identities for local machine and file server will be the same. But what about the Hosted Exchange server? Must the users have a separate email password, or is it possible to combine the two? (I realize it might depend on the specific hosting provider, but is it possible?) If not, it seems like I have these options: Deal with it: users have a separate email password. Host Exchange on the local server: more than they want to manage in-house? Purchase a hosted VPS, make it part of the domain, and host Exchange there. (Or can/should a VPS be a domain controller?) I realize I have a lot of questions in there. The main one: is there any reason to use a Hosted Exchange service if I'm setting up other Windows services?

  Read the article

• Wireless keeps shutting off in Windows 7

  - by Nathan Adams

  I have Windows 7 Ultimate 32bit installed on a Dell Latitude XT Tablet and for the life of me I can't figure out this really weird problem. The symptom is that the Wireless will disconnect from the AP and if I tell it to scan again, it says there are no APs in the area. I do have another wireless card in the laptop and if I disable the first one and enable the second, I am able to get onto the wireless however if I want to use the first card again I have to restart. I tried enabling/disabling the device, nothing will kick start the wireless again in the first card without a restart. I even tried different drivers. So, it seems it is random but it does occur more often when there is increased network activity (ie downloading a large file). The laptop doesn't seem to be overheating. I have tried the following: Under "Change Advanced Power Settings" for the current power profile, I set the "Wireless Adapter settings" to "Maximum Performance". Under device manger, I went to the card in question, and went to the advanced tab and set the "Power Saving mode" to "MAX_PSP" Both cards I have seem to exhibit the behavior after awhile. Both models of those cards are: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Gigabyte GN-WS30N 802.11n mini WLAN Card Has anyone have any ideas or ran into this before?

  Read the article

• VMWare web UI intermittent access on CentOS

  - by PeteWilliams

  Hiya, I've got a CentOS 5.2 server that I'm trying to get set up as a development environment. As part of this, I planned to install VMWare Server 2 and set up several virtual development servers. I've got as far as installing VMWare Server 2 but access to the remote control panel is only working intermittently. If I access it through Firefox at https://127.0.0.1:8333/ui/# it usually says either: "Connection intterupted: connection was reset before the page loaded" Or "Firefox can't establish a connection to the server at 127.0.0.1" But every now and then it lets me in and I'll manage a few clicks in the web UI before it kicks me out with the following error: "The server could not complete a request (HTTP 0 ). The server encountered an unexpected condition that prevented it from fulfilling the request. If this problem persists, please contact your system administrator." I've done all the updates available in CentOS except one OpenOffice one that is causing a conflict, and I re-ran wmware-config.pl after updating the kernel. Though I went with all the defaults as I don't really know what I'm doing! I've since rebooted and nothing changed. I've also tried accessing the control panel remotely from another machine in the network and the results are the same. Does anyone have any ideas what might be causing this and how I can resolve it? I'm afraid I'm a developer playing at sys-admin, so I may be missing something obvious! Many thanks Pete Update I have now reinstalled both the operating system and VMWare and I'm still getting the same issue. I wonder if it's a result of the settings I'm putting in on the config.pl script..?

  Read the article

< Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >