Search Results

Search found 76098 results on 3044 pages for 'http gdata youtube com'.

Page 491/3044 | < Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >

• Apache Serving 403 Forbidden after OS X Snow Leopard Upgrade to Version 10.6.6

  - by Ian Oxley

  I've just upgraded my MacBook Pro to OS X Snow Leopard version 10.6.6 and now Apache is misbehaving: requests to http://localhost/ generate a 403 Forbidden response -- FIXED requests to any of my virtual hosts seem to generate a 200 Ok response, but contain zero bytes Some further info that might be useful: I'm using the Apache that comes bundled with OS X. I'm using PHP from http://www.entropy.ch/software/macosx/php/ (which is in /usr/local/bin) I've had look at the Apache error log and the only error seems to be the following: [notice] child pid 744 exit signal Segmentation fault (11) I'm completely stumped by this. Any help would be much appreciated. UPDATE Ok, I've managed to resolve the 403 Forbidden error thanks to http://techtrouts.com/mac-os-x-105-web-sharing-forbidden-403-on-httplocalhostusername/ I'm still having the second problem though for any request e.g. this now happens when I request http://localhost

  Read the article

• Exchange 2007 Email Address Policies

  - by Ryan Migita

  We have recently upgraded to Exchange 2007 (from 2003) and have noticed the change from recipient policies to email address policies. We have two separate domains (let's call them domaina.com and domainb.com) we receive email for, have email address policies and both email address policies are not applied. In our Exchange 2003 environment, domaina.com was the default email address when we created new mailboxes and due to the migration, domainb is the default (and its email address policy is a higher priority). Now, when we create a new mailbox (or edit existing ones), the primary email address becomes domainb.com. Now the question is, is this as simple as putting the email address policies in the correct order? Do I have to apply both policies? What effect will the above changes make to existing mailboxes? Since we do not have any conditions set on the policies, I assume prior to making these changes, I should force all domainb mailboxes to not automatically update email address based on policy? Thanks in advance!

  Read the article

• Mercurial not receiving push

  - by Jeffrey04

  I have a mercurial web-frontend (hgwebdir.cgi) installed on a server, and an installation of nginx was installed in front of it as a reverse proxy to the web-frontend as my friend suggested. However, whenever a large changeset is pushed (via a script), it would fail. I found an issue ticket @google-code that describe similar problem, and there is a solution that says (#39) So the server side answer is: don't send the 401 back early. Be as slow/dumb as 'hg serve' and make the hg client send the bundle twice. How do I do that? My current nginx config location /repo/testdomain.com { rewrite ^(.*) http://bpj.kkr.gov.my$1/hgwebdir.cgi; } location /repo/testdomain.com/ { rewrite ^(.*) http://bpj.kkr.gov.my$1hgwebdir.cgi; } location /repo/testdomain.com/hgwebdir.cgi { proxy_pass http://localhost:81/repo/testdomain.com/hgwebdir.cgi; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering on; client_max_body_size 4096M; proxy_read_timeout 30000; proxy_send_timeout 30000; } From the access log we keep seeing 408 entries incoming.ip.address - - [18/Nov/2009:08:29:31 +0800] "POST /repo/testdomain.com/hgwebdir.cgi/example_repository?cmd=unbundle&heads=73121b2b6159afc47cc3a028060902883d5b1e74 HTTP/1.1" 408 0 "-" "mercurial/proto-1.0" incoming.ip.address - - [18/Nov/2009:08:37:14 +0800] "POST /repo/testdomain.com/hgwebdir.cgi/example_repository?cmd=unbundle&heads=73121b2b6159afc47cc3a028060902883d5b1e74 HTTP/1.1" 408 0 "-" "mercurial/proto-1.0" Is there anything else I can do on the server because solving it on the server side is preferable :/ Further Findings Bitbucket seems to have this solved ( Check liquidhg bitbucket project and the Diagnosis wiki page ) on the server side, can't find the config anywhere though :/ What happens next varies depending on your server. Some servers refuse the BODY, simplying closing the pipe from the client and causing Mercurial to fail. Some, like Apache (at least the way I configure it, and that could be part of the problem) and nginx (they way BitBucket.org configures it), accept the BODY, though it may take a few retries. Bottom line: if Mercurial doesn't fail the push, it sends the changeset data at least once to a server that has already told it it lacks credentials (more on this at Blame). Assuming Mercurial is still running, it resends the "unbundle" request and data, this time with authentication. Finally, Apache accepts the data successfully. Nginx, OTOH, at least under BitBucket's configuration, seems to reassemble the previous body (the one that lacked authentication) and somehow keep Mercurial from re-sending the whole body.

  Read the article

• 502 Bad Gateway with nginx + apache + subversion + ssl (SVN COPY)

  - by theplatz

  I've asked this on stackoverflow, but it may be better suited for serverfault... I'm having a problem running Apache + Subversion with SSL behind an Nginx proxy and I'm hoping someone might have the answer. I've scoured google for hours looking for the answer to my problem and can't seem to figure it out. What I'm seeing are "502 (Bad Gateway)" errors when trying to MOVE or COPY using subversion; however, checkouts and commits work fine. Here are the relevant parts (I think) of the nginx and apache config files in question: Nginx upstream subversion_hosts { server 127.0.0.1:80; } server { listen x.x.x.x:80; server_name hostname; access_log /srv/log/nginx/http.access_log main; error_log /srv/log/nginx/http.error_log info; # redirect all requests to https rewrite ^/(.*)$ https://hostname/$1 redirect; } # HTTPS server server { listen x.x.x.x:443; server_name hostname; passenger_enabled on; root /path/to/rails/root; access_log /srv/log/nginx/ssl.access_log main; error_log /srv/log/nginx/ssl.error_log info; ssl on; ssl_certificate server.crt; ssl_certificate_key server.key; add_header Front-End-Https on; location /svn { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; set $fixed_destination $http_destination; if ( $http_destination ~* ^https(.*)$ ) { set $fixed_destination http$1; } proxy_set_header Destination $fixed_destination; proxy_pass http://subversion_hosts; } } Apache Listen 127.0.0.1:80 <VirtualHost *:80> # in order to support COPY and MOVE, etc - over https (443), # ServerName _must_ be the same as the nginx servername # http://trac.edgewall.org/wiki/TracNginxRecipe ServerName hostname UseCanonicalName on <Location /svn> DAV svn SVNParentPath "/srv/svn" Order deny,allow Deny from all Satisfy any # Some config omitted ... </Location> ErrorLog /var/log/apache2/subversion_error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/subversion_access.log combined </VirtualHost> From what I could tell while researching this problem, the server name has to match on both the apache server as well as the nginx server, which I've done. Additionally, this problem seems to stick around even if I change the configuration to use http only.

  Read the article

• Weird behaviour with OpenVPN: can not connect to a few websites

  - by Gaby Solis

  My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

  Read the article

• How to configure sendmail to relay local user mail to public host?

  - by Chau Chee Yang

  I am using Linux/Fedora's sendmail as my mail server. The server do not has a public domain name. It connect to Internet via dial-up. There are few users in the server. I have successfully configure my sendmail to relay mail to public host (via smart_host): # mail <user>@gmail.com user@gmail.com receive mail from this private host. However, if I send a mail to local user (without domain name): # mail <user> All mails are deliver to my server's mail spooler (/var/spool/mail). I wish all mails send to local user may relay to a public domain that I have registered, is that possible to do so with sendmail? mail user1 will send mail to [email protected].com mail user2 will send mail to [email protected]

  Read the article

• force https with apache before .htpasswd

  - by johnlai2004

  I have this in my .htaccess file RewriteEngine On RewriteCond %{HTTPS} off RewriteRule ^(.*)$ https://www.myweb.com/phpmyadmin$1 [R,L] AuthUserFile /var/www/myweb/.htpasswd AuthGroupFile /dev/null AuthName "Sovereign Databases" AuthType Basic <Limit GET> require valid-user </Limit> But everytime I go to http://www.myweb.com/phpmyadmin, the .htpasswd prompts me for a credentials BEFORE i'm redirected to https://www.myweb.com/phpmyadmin. After I type in my username and password, I get redirected to https://www.myweb.com/phpmyadmin. The problem is that I don't want anyone to submit their username and password unencrypted via http. How do I force people to login via the https version even if they typed in the http version?

  Read the article

• Different Apache log file for each subdomain?

  - by consolibyte

  Is it possible to configure Apache to use a different log file for each subdomain, even if all of the subdomains are within the same VirtualHost container? So, I have only one VirtualHost: <VirtualHost *:80> ServerName example.com ServerAlias test1.example.com test2.example.com test3.example.com </VirtualHost> And I want to end up with the following log files: /var/log/httpd-access_test1.log /var/log/httpd-access_test2.log /var/log/httpd-access_test3.log I know I can probably do this with a custom log format and split-logs, but I was wondering if there's a way to just have Apache do it for me.

  Read the article

• YSlow always tells me my content is not served from a CDN

  - by dotnetchris

  YSlow always tells me my content is not served from a CDN no matter what value(s) I put in about:config extensions.yslow.cdnHostnames. I've tried entering my.cdn.com, http://my.cdn.com/folder1/a/b/, http://my.cdn.com basically every variation I could think of and no matter what values I configure it never acknowledges it's hosted on a CDN. Is this just a giant bug in YSlow or is there some kind of specified format that's not explained anywhere that it wants?

  Read the article

• How to configure IIS for SVG and web testing with Visual Studio?

  - by macias

  Let's say I have a simple web page with svg image in it: <img src="foobar.svg" alt="not working" /> If I make this page as static html page and view it directly svg is displayed. If I type the address of this svg -- it is displayed. But when I make this as .aspx page and launch it dynamically from Visual Studio I get alt text. If I type the address of this svg (from localhost, not as a local file) -- browser tries to download it instead of displaying. I already defined mime type in IIS (for entire server -- "image/svg+xml") and restarted IIS. Same effect as before. Question: what should I do more? Update WireShark won't work (it is in documentation), I tried also RawCap, but it cannot trace my connection (odd), luckily Fiddler worked: From client: GET http://127.0.0.1:1731/svg/document_edit.svg HTTP/1.1 Host: 127.0.0.1:1731 User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:10.0.1) Gecko/20100101 Firefox/10.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Answer from server: HTTP/1.1 200 OK Server: ASP.NET Development Server/10.0.0.0 Date: Thu, 16 Feb 2012 11:14:38 GMT X-AspNet-Version: 4.0.30319 Cache-Control: private Content-Type: application/octet-stream Content-Length: 87924 Connection: Close <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!-- Created with Inkscape (http://www.inkscape.org/) --> <svg xmlns: *** FIDDLER: RawDisplay truncated at 128 characters. Right-click to disable truncation. *** For the record, here is useful Q&A for Fiddler: http://stackoverflow.com/questions/826134/how-to-display-localhost-traffic-in-fiddler-while-debugging-an-asp-net-applicati

  Read the article

• PHP crashing during oAuth scripts

  - by FunkyChicken

  I just installed Nginx 1.2.4 and PHP 5.4.0 (from svn) (php fpm). CentOs 5.8 64 The problem I have is that PHP crashes the moment I run any social oAuth scripts. I have tried to log into Facebook, Twitter and Google with various scripts that I know work on my other servers. When I load the scripts I get a 502 error from Nginx. And I find these errors in the log: in php-fpm log: WARNING: [pool www] child 23821 exited on signal 11 (SIGSEGV) after 1132.862984 seconds from start in nginx log: ERROR: recv() failed (104: Connection reset by peer) while reading response header from upstream From what I can see, it goes wrong when PHP tries to make a request to any of the oAuth servers. https://github.com/mahmudahsan/PHP-SDK-3.0---Graph-API-base-Facebook-Connect-Tutorial-Source for example is one of the scripts that works perfectly on my other machines, but causes PHP to crash. I found: http://stackoverflow.com/questions/3616191/nginx-php-fpm-502-bad-gateway which seems to be a similar problem, but I cannot find a way to solve it. +++ UPDATE +++ Now I have been doing some debugging in 1 of the scripts that is playing up. If you go to line 808 http://pastebin.com/gSnzRtXb it runs the curl_exec() command. When that is ran, it crashes. If i echo'test';exit; just above that line, it echo's correctly, if i do it below that line, php crashes. Which means it's that line 808 which causes the crash. So I made a very simple script to do some testing: http://pastebin.com/Rshnyhcm which also uses curl_exec, but that runs just fine. So I started to dig deeper into that query from the facebook script to see what values the $opts array contains from line 806. Output of that array is: http://pastebin.com/Cq9ffd3R What the problem is, I still have no clue :(

  Read the article

• How to create dynamic Scatter Plot/Matrix with labels and categories on both axis in Excel 2010?

  - by user1581900

  Let us consider a following data set: Name | Age | Hair Color ----------------------------- John | Young | Brown Sophie | Old | Blond Adam | Mature| Blond Mark | Teen | Dark Jeremy | Old | Grey Alex | Young | Brown etc... Both Age and Hair Color, can take only defined values(Young/teen/mature/old and Blond/brown/Dark/Grey). Name is the only real variable here. I want to create a Scatter Plot / Matrix that will look something like that: I know that I schould use this tool to add labels to the scatter plot. I also found this youtube video that explains how to display categories on Y-axis Moreover I need the chart to be dynamic as explained in another youtube video. How do I combine all these approaches to get a Scatter Plot with categories as values on both axis?

  Read the article

• Is this a solution for having multiple SSL certificates on the same IP

  - by Saif Bechan

  I am running CentOS running on a VPS. I read some guides on having multiple SSL certificates on the same system, but I can not get the basics to work. The guide I got that makes the most sense to me is the doing the following. In CentOS I can make virtual NIC's. So I made 2 virtual NIC's to start with. 192.168.10.1, 192.168.10.2. Now I work in ISP manager Pro, so this is listening on my primary ip 1.1.1.1 For each website I have them listening on 192.168.10.1:80, 192.168.10.1:443 In the hosts file I made the following 2 entries 192.168.10.1 1st.com 192.168.10.2 2nd.com Now the strange thing is that when I browser to 1st.com I do not get the website located at 192.168.10.1, I get the website located at my prim IP 1.1.1.1 Should I do something like forwarding or routing for this setup to work? And the basic question: Will this setup even work? Are the SSL certificates based on the IP adress, or are the based on the host name, 1st.com and 2nd.com.

  Read the article

• Some visitors can't reach to my web site

  - by user39110

  Hi, i have dedicated server and hosting web sites and one of is www.btgmaslak.com but some visitors can't reach this web site. I thing there is configuration problem on dns... Can you help me ? Thanks http://www.intodns.com/btgmaslak.com

  Read the article

• How do I map an elastic IP to a domain, dont want to use Route 53

  - by Kaustubh P

  This is the first time I am doing this, so noob alert. I have an ec2 instance, to which I have assigned an elastic IP. I want to map this elastic IP to a webaddress foo.com, which I have bought from name.com. How do I do this? It would be very helpful if you you increase my vocabulary, and tell me the things involved, I dont know where to begin, SO has always been helpful! This is a screenshot of my name.com CP:

  Read the article

• Setting up DNS in WHM/cPanel

  - by Jon Furmanski

  I don't understand what I'm doing wrong, but I'm sure this is a simple fix. I setup WHM/cPanel for the first time on my VPS and understand how DNS works for the most part (or so I thought). I created under the main domain name 2 nameservers (ns1.maindomain.com & ns2.maindomain.com). I have 2 IP address for my sever so each one points to a unique IP: ns1.maindomain.com => 198.x.x.204 ns2.maindomain.com => 198.x.x.205 I also set up reverse DNS with my hosting provider. When I put in my two nameservers under another domain (secondary domain), GoDaddy states that the nameservers are invalid. Any ideas on why this is or any configurations in cPanel that need to be made?

  Read the article

• Point domain to port used by java app

  - by takeshin

  I have successfully installed YouTrack issue tracker following the guides at: http://confluence.jetbrains.net/display/YTD3/Linux.+YouTrack+JAR+as+a+Service http://youtrack.jetbrains.com/issue/JT-7619 The application is now running at: mydomain.com:8080 How do I configure the server to run at youtrack.mydomain.com instead? I've been trying to set a reverse proxy in Apache, but it didn't work for me.

  Read the article

• htaccess rewrite different folder url, two index files

  - by Andrew

  I've been searching for awhile now and haven't found anything that comes close to what I'm trying to accomplish. Right now my URL's look like this: www.website.com/something which are using the root folder /index.php Now I have created plugins within folders: /plugins/PLUGINNAME/index.php I want to be able to have URLs like: www.website.com/plugins/PLUGINNAME/anything/iwant/here which are all using /plugins/PLUGINNAME/index.php and not the root directory index.php. Currently www.website.com/plugins/PLUGINNAME/ works, but anything after /PLUGINNAME/xxx defaults to the /index.php.

  Read the article

• Sending mail through local MTA while domain MX records point to Google Apps

  - by Assaf

  My domain's email is managed by Google Apps, so that domain users get Gmail and Calendar, etc. But I also want to be able to send applicative notifications to users outside the domain via email (e.g. "some commented on your post", and so on). However, if I try to send email through code I get blocked by Gmail after a few emails. I send marketing email through MailChimp, to minimize the risk of appearing as spam to my users (one-click unsubscribe, etc.). But I can't send applicative message in this way. I want to install a local MTA (my server runs Ubuntu), but I'm not sure what anti-spam measures I need to implement so that receiving MTAs don't think it's a spam server. What's stopping anyone from setting up a mail server and sending emails using my domain name? AFAIK it's the DNS records that show the MTA's address actually belongs to the domain. But my understanding of this is rather superficial, so someone please correct me if I'm wrong. But what sort of DNS configuration do I need to put in place so that I don't get blacklisted (assuming I don't actually spam anyone)? The MX records already point to Google, and I'd like to keep it this way. So do I just need to define an A record for my internal mail server? Should it show email as coming from a sub-domain, so as not to conflict with the bare domain being managed by google? Edit: Does the following SPF record make sense if I want email from my domain name to be sent by either google's servers or any server with a dns name ending with mydomain.com? "v=spf1 ptr mx:google.com mx:googlemail.com ~all" How should I set up reverse DNS for my server? If I have an A record that points mailsender.mydomain.com to my MTA's ip address, does it mean that reverse lookup will only allow emails sent from [email protected]?

  Read the article

• Set postfix to send email but not to receive them

  - by CodeShining

  I'm using Google Apps to handle personal email addresses for my domain name, and I set up the DNS as Google suggests. All works fine. Now since I need a SMTP to send emails from my e-commerce I installed Postfix on the server. It works fine when I send emails to any email address but it doesn't send to the same domain name, so let's say my domain is example.com, I set postfix using example.com, if I try to reset a password using myaccount@example.com postfix doesn't send and instead reports on the mail.log Sep 20 01:09:52 ip-10-54-26-162 postfix/pickup[6809]: B09A3415D8: uid=33 from=<www-data> Sep 20 01:09:52 ip-10-54-26-162 postfix/cleanup[6854]: B09A3415D8: message-id=<20120920010952.B09A3415D8@ip-10-54-26-162.eu-west-1.compute.internal> Sep 20 01:09:52 ip-10-54-26-162 postfix/qmgr[30978]: B09A3415D8: from=<[email protected]>, size=4234, nrcpt=1 (queue active) Sep 20 01:09:52 ip-10-54-26-162 postfix/local[6856]: B09A3415D8: to=<[email protected]>, relay=local, delay=0.01, delays=0.01/0/0/0, dsn=5.1.1, status=bounced (unknown user: "myaccount") Of course it cannot find a local user "myaccount" since that account is on Google Apps... How can I tell Postfix to send the email and do not search for a local user?

  Read the article

• Can't get virtual desktops to show up on RDWeb for Server 2012 R2

  - by Scott Chamberlain

  I built a test lab using the Windows Server 2012 R2 Preview. The initial test lab has the following configuration (I have replaced our name with "OurCompanyName" because I would like it if Google searches for our name did not cause people to come to this site, please do the same in any responses) Physical hardware running Windows Server 2012 R2 Preview full GUI, acting as Hyper-V host (joined to the test domain as testVwHost.testVw.OurCompanyName.com) with the following VM's running on it VM running 2012 R2 Core acting as domain controller for the forest testVw.OurCompanyName.com (testDC.testVw.OurCompanyName.com) VM running 2012 R2 Core with nothing running on it joined to the test domain as testIIS.testVw.OurCompanyName.com A clean install of Windows 7, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it A clean install of Windows 8, all that was done to it was all windows updates where loaded and sysprep /generalize /oobe /shutdown /mode:vm was run on it I then ran "Add Roles and Features" from testVwHost and chose the "Remote Desktop Services Installation", "Standard Deployment", "Virtual machine-based desktop deployment". I choose testIIS for the roles "RD Connection Broker" and "RD Web Access" and testVwHost as "RD Virtualization Host" The Install of the roles went fine, I then went to Remote Desktop Services in server manager and wet to setup Deployment Properties. I set the certificate for all 3 roles to our certificate signed by a CA for *.OurCompanyName.com. I then created a new Virtual Desktop Collection for Windows 7 and Windows 8 and both where created without issue. On the Windows 7 pool I added RemoteApp to launch WordPad, For windows 8 I did not add any RemoteApp programs. Everything now appears to be fine from a setup perspective however if I go to https://testIIS.testVw.OurCompanyName.com/RDWeb and log in as the use Administrator (or any orher user) I don't see the virtual desktops I created nor the RemoteApp publishing of WordPad. I tried adding a licensing server, using testDC as the server but that made no difference. What step did I miss in setting this up that is causing this not to show up on RDWeb? If any additional information is needed pleas let me know. I have tried every possible thing I can think of and I am just groping around in the dark now. The virtual machines running on testVwHost The configuration screen for RD Services The Windows 7 Pool The Windows 8 Pool This is logged in as testVw\Administrator

  Read the article

• Can't connect to Gmail server via Mail.app in Mac OS X 10.6.3

  - by Johnny

  I've added my gmail account to Mail.app It worked find in previous days, and downloaded thousands of previous mails. But now, it can't connect to gmail server for days. What's the matter here? Here is my config in account setting: Account Type: Gmail IMAP Email Address: xxx@gmail.com Incoming Mail Server: imap.gmail.com User Name: xxx@gmail.com Password: xxxxxx And also, is there any means that I can view the transaction log of Mail.app? Maybe there I can find more information.

  Read the article

• Nagios Check_hpjd giving me problems!

  - by Mister IT Guru

  When I run the following [root@host plugins]# ./check_hpjd -H printer1.mydomain.com : Timeout from host printer1.mydomain.com I have Net-snmp installed on my system, I noted that i didn't have net-snmp-utils installed, and then I was able to run [root@host plugins]# snmpwalk -Os -c public -v 1 printer1.mydomain.com system sysDescr.0 = STRING: HP ETHERNET MULTI-ENVIRONMENT sysObjectID.0 = OID: enterprises.11.2.3.9.1 sysUpTimeInstance = Timeticks: (325408663) 37 days, 15:54:46.63 sysContact.0 = STRING: sysName.0 = STRING: printer1 sysLocation.0 = STRING: sysServices.0 = INTEGER: 72 So I know that the printer is working as expected, (as far as SNMP is concerned). But when I run [root@host plugins]# ./check_hpjd -H printer1.mydomain.com -C public Error in packet () I get this error - From what I've tried so far, I know my host can communicate via SNMP, I know the printer responds via SNMP, so I guess I'm left to look at the plug-in, which I will be checking up on. I'm new to SNMP, I am investigating this with my good friend Google search, but I am on a learning curve here, so please forgive my questions if they sound stupid,

  Read the article

• Internal Website links only working for some users

  - by Ryan

  We are having a very hard time trying to figure out this problem or the root cause. Our website www. countrymusicislove .com is only correctly displaying the homepage for some users. Anytime they click on a post, about me, etc, a 404 error page is displayed. Everything worked fine before we moved over to a new hosting company 2 weeks ago. I am looking for any ideas and even willing to pay someone to troubleshoot and fix this issue as no one seems to have an answer. The entire website is done in the latest version of wordpress. The old website address for the website is http://siteground243.com/~countr10/ And the domain name was registered through google for enom.com Everything is now going through Arvixe.com On my work computer, I am able to get the 404 error to appear on other pages by turning on friendly error messages. When I turn off friendly error messages, everything seems to work. I have tried this several times and it doesn't seem like a coincidence.

  Read the article

• 404 Error on a file that exists?

  - by Abs

  Hello all, A script makes a GET request to my URL like so: http://mydomain.com/cgi-bin/uu_ini_status_audios.pl?tmp_sid=b742be1d131c4d32237a9f1fcdca659e&rnd_id=0.2363453360320319 However, I get a 404 returned straight away: The requested URL /cgi-bin/uu_ini_status_audios.pl was not found on this server. But that script exists on my server, I can see the file! It has the correct permissions (I gave it a 777 to be sure). It is also owned by my apache user and its in the group apache. What am I missing?? Thanks for any help on this! Update I thought it would have been a htaccess (rewrite) but I don't think it is anymore. I tried putting a index.php file in there and try to access it via my URL but I can't even do that! I tried this: http://mydoamin.com/cgi-bin/index.php - same 404 error! I get this in myerror log: [Tue Sep 14 14:42:49 2010] [error] [client xx.xxx.xx.xxx] script not found or unable to stat: /var/www/vhosts/mydomain.com/cgi-bin Access_log file: xx.xxx.xx.xxx - - [14/Sep/2010:14:48:25 +0200] "GET /cgi-bin/index.php HTTP/1.1" 404 475 "-" "Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2.9) Gecko/20100824 Firefox/3.6.9 (.NET CLR 3.5.30729)" Update 2 My htaccess file: <IfModule mod_rewrite.c> RewriteEngine On RewriteRule ^blog/ - [L] RewriteCond %{HTTP_HOST} ^www\.mydomain\.com$ [NC] RewriteRule ^(.*)$ http://mydomain.com/$1 [R=301,L] RewriteRule ^search/(.*)/(.*)/(.*)/(.*) /search.php?searchfor=$1&sortby=$2&page=$3&searchterm=$4 RewriteRule ^confirmemail/(.*) /confirmemail.php?code=$1 RewriteRule ^resetpassword/(.*) /resetpassword.php?code=$1 RewriteRule ^resendconfirmation/(.*) /resendconfirmation.php?userid=$1 RewriteRule ^categories/ /categories.php RewriteRule ^([-_~*a-zA-Z0-9]+)(\/)?$ /memberprofile.php?username=$1 RewriteRule ^browse/audios/(.*)/(.*)/(.*)/(.*) /audios.php?sortby=$1&filter=$2&page=$3&title=$4 RewriteRule ^browse/categories/audios/(.*)/(.*)/(.*)/(.*) /categoryaudios.php?sortby=$1&filter=$2&page=$3&title=$4 RewriteRule ^audios/(.*)/(.*) /playaudio.php?audioid=$1&title=$2 RewriteRule ^download/audio/(.*)/(.*) /downloadaudio.php?AUDIOID=$1&title=$2 RewriteRule ^members/audios/(.*)/(.*) /memberaudios.php?pid=$1&username=$2 RewriteRule ^syndicate/audios/(.*)/(.*) /syndicateaudios.php?filter=$1&title=$2 </IfModule> Update 3 [root@smydomain ~]# ls -la /var/www/vhosts/mydoamin.com/httpdocs/cgi-bin/ total 60 drwxr-xr-x 3 apache root 4096 Sep 14 14:37 . drwxr-x--- 20 som psaserv 4096 Sep 14 14:40 .. drwxr-xr-x 2 apache root 4096 Sep 7 03:01 configs -rwxrwxrwx 1 apache root 4 Sep 14 14:37 index.php -rwxrwxrwx 1 apache apache 6520 Sep 7 03:01 uu_ini_status_audios.pl -rwxr-xr-x 1 apache root 3215 Sep 7 03:01 uu_lib_audios.pl -rwxr-xr-x 1 apache root 30249 Sep 7 03:01 uu_upload_audios.pl

  Read the article

< Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >