Search Results

Search found 14548 results on 582 pages for 'self hosting'.

Page 491/582 | < Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >

• Does the method of adjustment matter, or just the final calibration?

  - by Steve

  A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

  Read the article

• Best Practices for serializing/persisting String Object Dictionary entities

  - by Mark Heath

  I'm noticing a trend towards using a dictionary of string to object (or sometimes string to string), instead of strongly typed objects. For example, the new Katana project makes heavy use of IDictionary<string,object>. This approach avoids the need to continually update your entity classes/DTOs and the database tables that persist them with new properties. It also avoids the need to create new derived entity types to support new types of entity, since the Dictionary is flexible enough to store any arbitrary properties. Here's a contrived example: class StorageDevice { public int Id { get; set; } public string Name { get; set; } } class NetworkShare : StorageDevice { public string Path { get; set; } public string LoginName { get; set; } public string Password { get; set; } } class CloudStorage : StorageDevice { public string ServerUri { get; set } public string ContainerName { get; set; } public int PortNumber { get; set; } public Guid ApiKey { get; set; } } versus: class StorageDevice { public IDictionary<string, object> Properties { get; set; } } Basically I'm on the lookout for any talks, books or articles on this approach, so I can pick up on any best practices / difficulties to avoid. Here's my main questions: Does this approach have a name? (only thing I've heard used so far is "self-describing objects") What are the best practices for persisting these dictionaries into a relational database? Especially the challenges of deserializing them successfully with strongly typed languages like C#. Does it change anything if some of the objects in the dictionary are themselves lists of strongly typed entities? Should a second dictionary be used if you want to temporarily store objects that are not to be persisted/serialized across a network, or should you use some kind of namespacing on the keys to indicate this?

  Read the article

• MOSSLover Lives On&hellip;

  - by MOSSLover

  A while back, maybe 6 months, I got some bad news about 2010.  Microsoft was removing Office from the MOSS equivalent of 2010, so basically my alias would be obsolete the second 2010 caught on in the community.  I thought about it for some time.  I had some discussions with friends in the community.  I even noticed that the MOSSMan changed his twitter id.  I started my blog around a WSS 3.0 project when I worked for LRS in there St. Louis Office in February/March 2007.  So I think it’s fitting to keep the name, because my community involvement centers around 2007.  My first ever speaking ordeal was at the Kansas City Office Geeks meeting in November of 2007 on Disaster Recovery where about three people attended.  The first user group meeting I ever attended was around the month of June 2007 at the KC .Net User Group about two weeks after my braces were installed.  It’s definitely fitting to say that 2007 paved the way for everything that happened in the past 2/2 1/2 years.  If anyone asks what MOSSLover means I added a description on twitter and I also added my name.  I added my name for other reasons, because I’m sick of people thinking I am the guy in the photo.  Also, I’d like people to recognize me for who I am.  Everyone should expect less of the hat in the upcoming year and more of my hair.  I’ve taken a vow to wear the hat less and less this year.  I am sick of buying hats, plus I want to move forward to gain more self confidence.  The hat does not really help.  I will still wear a t-shirt and jeans in most of my presentations.  That is who I am and it will not change any time soon.  If you expect to see me in a skirt good luck with that as it won’t be happening unless I am forced at gun point.  I hope you guys have a good weekend.  Later all… Technorati Tags: MOSSLover,Cardinal's Hat,Becky Isserman

  Read the article

• PHP-FPM stops responding and dies [migrated]

  - by user12361

  I'm running Drupal 6 with Nginx 1.5.1 and PHP-FPM (PHP 5.3.26) on a 1GB single core VPS with 3GB of swap space on SSD storage. I just switched from shared hosting to this unmanaged VPS because my site was getting too heavy, so I'm still learning the ropes. I have moderately high traffic, I don't really monitor it closely but Google Adsense usually record close to 30K page views/day. I usually have 50 to 80 authenticated users logged in and a few hundred more anonymous users hitting the Boost static HTML cache at any given moment. The problem I'm having is that PHP-FPM frequently stops responding, resulting in Nginx 502 or 504 errors. I swear I have read every page on the internet about this issue, which seems fairly common, and I've tried endless combinations of configurations, and I can't find a good solution. After restarting Nginx and PHP-FPM, the site runs really fast for a while, and then without warning it simply stops responding. I get a white screen while the browser waits on the server, and after about 30 seconds to a minute it throws an Nginx 502 or 504 error. Sometimes it runs well for 2 minutes, sometimes 5 minutes, sometimes 5 hours, but it always ends up hanging. When I find the server in this state, there is still plenty of free memory (500MB or more) and no major CPU usage, the control and worker PHP-FPM processes are still present, and the server is still pingable and usable via SSH. A reload of PHP-FPM via the init script revives it again. The hangups don't seem to correspond to the amount of traffic, because I observed this behavior consistently when I was testing this configuration on a development VPS with no traffic at all. I've been constantly tweaking the settings, but I can't definitively eliminate the problem. I set Nginx workers to just 1. In the PHP-FPM config I have tried all three of the process managers. "Dynamic" is definitely the least reliable, consistently hanging up after only a few minutes. "Static" also has been unreliable and unpredictable. The least buggy has been "ondemand", but even that is failing me, sometimes after as much as 12 to 24 hours. But I can't leave the server unattended because PHP-FPM dies and never comes back on its own. I tried adjusting the pm.max_children value from as low as 3 to as high as 50, doesn't make a lot of difference, but I currently have it at 10. Same thing for the spare servers values. I also have set pm.max_requests anywhere from 30 to unlimited, and it doesn't seem to make a difference. According to the logs, the PHP-FPM processes are not exiting with SIGSEGV or SIGBUS, but rather with SIGTERM. I get a lot of lines like: WARNING: [pool www] child 3739, script '/var/www/drupal6/index.php' (request: "GET /index.php") execution timed out (38.739494 sec), terminating and: WARNING: [pool www] child 3738 exited on signal 15 (SIGTERM) after 50.004380 seconds from start I actually found several articles that recommend doing a graceful reload of PHP-FPM via cron every few minutes or hours to circumvent this issue. So that's what I did, "/etc/init.d/php-fpm reload" every 5 minutes. So far, it's keeping the lights on. But it feels like a dreadful hack. Is PHP-FPM really that unreliable? Is there anything else I can do? Thanks a lot!

  Read the article

• Searching for context in Silverlight applications

  - by PeterTweed

  A common behavior in business applications that have developed through the ages is for a user to be able to get information or execute commands in relation to some information/function displayed by right clicking the object in question and popping up a context menu that offers relevant options to choose. The Silverlight Toolkit April 2010 release introduced the context menu object.  This can be added to other UI objects and display options for the user to choose.  The menu items can be enabled or disabled as per your application logic and icons can be added to the menu items to add visual effect.  This post will walk you through how to use the context menu object from the Silverlight Toolkit. Steps: 1. Create a new Silverlight 4 application 2. Copy the following namespace definition to the user control object of the MainPage.xaml file: xmlns:my="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Input.Toolkit"   3. Copy the following XAML into the LayoutRoot grid in MainPage.xaml:          <Border CornerRadius="15" Background="Blue" Width="400" Height="100">             <TextBlock Foreground="White" FontSize="20" Text="Context Menu In This Border...." HorizontalAlignment="Center" VerticalAlignment="Center" >             </TextBlock>             <my:ContextMenuService.ContextMenu>                 <my:ContextMenu >                     <my:MenuItem                 Header="Copy"                 Click="CopyMenuItem_Click" Name="copyMenuItem">                         <my:MenuItem.Icon>                             <Image Source="copy-icon-small.png"/>                         </my:MenuItem.Icon>                     </my:MenuItem>                     <my:Separator/>                     <my:MenuItem Name="pasteMenuItem"                 Header="Paste"                 Click="PasteMenuItem_Click">                         <my:MenuItem.Icon>                             <Image Source="paste-icon-small.png"/>                         </my:MenuItem.Icon>                     </my:MenuItem>                 </my:ContextMenu>             </my:ContextMenuService.ContextMenu>         </Border>   The above code associates a context menu with two menu items and a separator between them to the border object.  The menu items has icons associated with them to add visual appeal.  The menu items have click event handlers that will be added in the MainPage.xaml.cs code behind in a later step. 4. Add two icon sized images to the ClientBin directory of the web project hosting the Silverlight application, named copy-icon-small.png and paste-icon-small.jpg respectively.  I used copy and paste icons as the names suggest. 5. Add the following code to the class in MainPage.xaml.cs file:         private void CopyMenuItem_Click(object sender, RoutedEventArgs e)         {             MessageBox.Show("Copy selected");         }           private void PasteMenuItem_Click(object sender, RoutedEventArgs e)         {             MessageBox.Show("Paste selected");         }   This code adds the event handlers for the menu items defined in step 3. 6. Run the application, right click on the border and select a menu option and see the appropriate message box displayed. Congratulations it’s that easy!   Take the Slalom Challenge at www.slalomchallenge.com!

  Read the article

• PASS Summit for SQL Starters

  - by Davide Mauri

  I’ve received a buch of emails from PASS Summit “First Timers” that are also somehow new to SQL Server (for “somehow” I mean people with less than 6 month experience but with some basic knowledge of SQL Server engine) or are catching up from SQL Server 2000. The common question regards the session one should not miss to have a broad view of the entire SQL Server platform have some insight into some specific areas of SQL Server Given that I’m on (semi-)vacantion and that I have more free time (not true, I have to prepare slides & demos for several conferences, PASS Summit  - Building the Agile Data Warehouse with SQL Server 2012 - and PASS 24H - Agile Data Warehousing with SQL Server 2012 - among them…but let’s pretend it to be true), I’ve decided to make a post to answer to this common questions. Of course this is my personal point of view and given the fact that the number and quality of session that will be delivered at PASS Summit is so high that is very difficoult to make a choice, fell free to jump into the discussion and leave your feedback or – even better – answer with another post. I’m sure it will be very helpful to all the SQL Server beginners out there. I’ve imposed to myself to choose 6 session at maximum for each Track. Why 6? Because it’s the maximum number of session you can follow in one day, and given that all the session will be on the Summit DVD, they are the answer to the following question: “If I have one day to spend in training, which session I should watch?”. Of course a Summit is not like a Course so a lot of very basics concept of well-established technologies won’t be found here. Analysis Services, Integration Services, MDX are not part of the Summit this time (at least for the basic part of them). Enough with that, let’s start with the session list ideal to have a good Overview of all the SQL Server Platform: Geospatial Data Types in SQL Server 2012 Inside Unstructured Data: SQL Server 2012 FileTable and Semantic Search XQuery and XML in SQL Server: Common Problems and Best Practice Solutions Microsoft's Big Play for Big Data Dashboards: When to Choose Which MSBI Tool Microsoft BI End-User Tools 360° for what concern Database Development, I recommend the following sessions Understanding Transaction Isolation Levels What to Look for in Execution Plans Improve Query Performance by Fixing Bad Parameter Sniffing A Window into Your Data: Using SQL Window Functions Practical Uses and Optimization of New T-SQL Features in SQL Server 2012 Taking MERGE Beyond the Basics For Business Intelligence Information Delivery Analyzing SSAS Data with Excel Building Compelling Power View Reports Managed Self-Service BI PowerPivot 101  SharePoint for Business Intelligence The Best Microsoft BI Tools You've Never Heard Of and for Business Intelligence Architecture & Development BI Power Hour Building a Tabular Model Database Enterprise Information Management: Bringing Together SSIS, DQS, and MDS SSIS Design Patterns Storing Columnstore Indexes Hadoop and Its Ecosystem Components in Action Beside the listed sessions, First Timers should also take a look the the page PASS set up for them: http://www.sqlpass.org/summit/2012/Connect/FirstTimers.aspx See you at PASS Summit!

  Read the article

• Moms on Mobile: Are They Way Ahead of You?

  - by Mike Stiles

  You may have no idea how much and how fast moms are embracing mobile. Of all the demographics that can be targeted by marketers, moms have always been at or near the top of the list. And why not? They’re running households, they’re all over town, they’re making buying decisions, and they’re influencing family and friends. They, out of necessity, become masters of efficiency and time management. So when a technology tool, like mobile, comes along that assists with that efficiency and time management, we would obviously expect them to take advantage of it. So if it’s obvious, why are so many big, sophisticated brands left choking on the dust of moms who have zoomed past them in the adoption of mobile, and social on mobile? Let’s break down some hard truths as presented by a Mojiava report: -Moms spend 6.1 hours per day on average on their smartphones – more than magazines, TV or radio. -46% took action after seeing a mobile ad. -51% self-identify as “addicted” to their smartphone. -Households with an income of $25K-$50K have about the same mobile penetration among moms as those with incomes of $50K-$75K. So mobile is regarded as a necessity for middle-class moms. -Even moms without smartphones spend 2.5 hours on average per day on some connected mobile device. -Of moms with such devices, 9.8% have an iPad, 9.5% a Kindle and 5.7% an iPod Touch. -Of tablet-owning moms, 97% bought something using their tablet in the last month. -31% spend over 10 hours per week on their tablet, but less than 2 hours per week on their PCs. -62% of connected moms use shopping apps. -46% want to get info on their mobile while in a store. -Half of connected moms use social on their mobile. And they’re engaged. 81% are brand fans, 86% post updates, and 84% comment. If women and moms are one of your primary targets and you find yourself with no strong social channels where content is driving engagement and relationship-building, with sites not optimized for mobile, or with no tablet or smartphone apps, you have been solidly left behind by your customers and prospects. And their adoption of mobile and social on mobile is only exponentially speeding up, not slowing down. How much sense does it make when your customer is ready to act on your mobile ad, wants to user your iPad app to buy something from you, wants to be your fan on Facebook, wants to get messages and deals from you while they’re in your store…but you’re completely absent? I’ll help you cheat on the test by giving you the answer…no sense at all. Catch up to momma.

  Read the article

• Data Source Use of Oracle Edition Based Redefinition (EBR)

  - by Steve Felts

  Edition-based redefinition is a new feature in the 11gR2 release of the Oracle database. It enables you to upgrade the database component of an application while it is in use, thereby minimizing or eliminating down time. It works by allowing for a pre-upgrade and post-upgrade view of the data to exist at the same time, providing a hot upgrade capability. You can then specify which view you want for a particular session.  See the Oracle Database Advanced Application Developer's Guide for further information. There is also a good white paper at Edition Based Definition. Using this feature of the Oracle database does not require any new WebLogic Server functionality. It is set for each connection in the pool automatically by simply specifying SQL ALTER SESSION SET EDITION = edition_name in the Init SQL parameter in the data source configuration. This can be configured either via the console or via WLST (setInitSQL on the JDBCConnectionPoolParams). This SQL statement is executed for each newly created physical database connection.Note that we are assuming that a data source references only one edition of the database. To make use of this feature, you would have an earlier version of the application with a data source that references the earlier EDITION and a later version of the application with a data source that references the later EDITION.   Once you start talking about multiple versions of a WLS application, you should be using the WLS "side-by-side" or "versioned" deployment feature.  See Developing Applications for Production Redeployment for more information.  By combining Oracle database EBR and WLS versioned deployment, the application can be failed over with no downtime, making the combination of features more powerful than either independently. There is a catch - you need to be running with a versioned database and a versioned application initially so then you can switch versions.  The recommended way to version a WLS application is to simply add the "Weblogic-Application-Version" property in the MANIFEST.MF file(you can also specify it at deployment time). The recommended way to configure the data source is to use a packaged data source descriptor that's stored in the ear or war so that everything is self-contained.  There are some restrictions.  You can't use a packaged data source with Logging Last Resource (LLR) - you need to use a system resource.  You can't use an application-scoped packaged data source with EmulateTwoPhaseCommit for the global-transactions-protocol with a versioned application - use a global scope.  See Configuring JDBC Application Modules for Deployment for more details. There's one known problem - it doesn't work correctly with an XA data source (patch available with bug 14075837).

  Read the article

• Welcome to BlogEngine.NET 2.9 using Microsoft SQL Server

  If you see this post it means that BlogEngine.NET 2.9 is running and the hard part of creating your own blog is done. There is only a few things left to do. Write Permissions To be able to log in to the blog and writing posts, you need to enable write permissions on the App_Data folder. If you’re blog is hosted at a hosting provider, you can either log into your account’s admin page or call the support. You need write permissions on the App_Data folder because all posts, comments, and blog attachments are saved as XML files and placed in the App_Data folder.  If you wish to use a database to to store your blog data, we still encourage you to enable this write access for an images you may wish to store for your blog posts.  If you are interested in using Microsoft SQL Server, MySQL, SQL CE, or other databases, please see the BlogEngine wiki to get started. Security When you've got write permissions to the App_Data folder, you need to change the username and password. Find the sign-in link located either at the bottom or top of the page depending on your current theme and click it. Now enter "admin" in both the username and password fields and click the button. You will now see an admin menu appear. It has a link to the "Users" admin page. From there you can change the username and password.  Passwords are hashed by default so if you lose your password, please see the BlogEngine wiki for information on recovery. Configuration and Profile Now that you have your blog secured, take a look through the settings and give your new blog a title.  BlogEngine.NET 2.9 is set up to take full advantage of of many semantic formats and technologies such as FOAF, SIOC and APML. It means that the content stored in your BlogEngine.NET installation will be fully portable and auto-discoverable.  Be sure to fill in your author profile to take better advantage of this. Themes, Widgets & Extensions One last thing to consider is customizing the look of your blog.  We have a few themes available right out of the box including two fully setup to use our new widget framework.  The widget framework allows drop and drag placement on your side bar as well as editing and configuration right in the widget while you are logged in.  Extensions allow you to extend and customize the behaivor of your blog.  Be sure to check the BlogEngine.NET Gallery at dnbegallery.org as the go-to location for downloading widgets, themes and extensions. On the web You can find BlogEngine.NET on the official website. Here you'll find tutorials, documentation, tips and tricks and much more. The ongoing development of BlogEngine.NET can be followed at CodePlex where the daily builds will be published for anyone to download.  Again, new themes, widgets and extensions can be downloaded at the BlogEngine.NET gallery. Good luck and happy writing. The BlogEngine.NET team

  Read the article

• Keep coding the wrong way to remain consistent? [closed]

  - by bwalk2895

  Possible Duplicate: Code maintenance: keeping a bad pattern when extending new code for being consistent, or not? To keep things simple let's say I am responsible for maintaining two applications, AwesomeApp and BadApp (I am responsible for more and no that is not their actual names). AwesomeApp is a greenfield project I have been working on with other members on my team. It was coded using all the fancy buzzwords, Multilayer, SOA, SOLID, TDD, and so on. It represents the direction we want to go as a team. BadApp is a application that has been around for a long time. The architecture suffers from many sins, namely everything is tightly coupled together and it is not uncommon to get a circular dependency error from the compiler, it is almost impossible to unit test, large classes, duplicate code, and so on. We have a plan to rewrite the application following the standards established by AwesomeApp, but that won't happen for a while. I have to go into BadApp and fix a bug, but after spending months coding what I consider correctly, I really don't want do continue perpetuate bad coding practices. However, the way AwesomeApp is coded is vastly different from the way BadApp is coded. I fear implementing the "correct" way would cause confusion for other developers who have to maintain the application. Question: Is it better to keep coding the wrong way to remain consistent with the rest of the code in the application (knowing it will be replaced) or is it better to code the right way with an understanding it could cause confusion because it is so much different? To give you an example. There is a large class (1000+ lines) with several functions. One of the functions is to calculate a date based on an enumerated value. Currently the function handles all the various calculations. The function relies on no other functionality within the class. It is self contained. I want to break the function into smaller functions (at the very least) and put them into their own classes and hide those classes behind an interface (at the most) and use the factory pattern to instantiate the date classes. If I just broke it out into smaller functions within the class it would follow the existing coding standard. The extra steps are to start following some of the SOLID principles.

  Read the article

• Where does a "Technical Programmer" fit in, and what does the title mean? [closed]

  - by Mike E

  Was: "What is a 'Technical Programmer'"? I've noticed in job posting boards a few postings, all from European companies in the games industry, for a "Technical Programmer". The job description was similar, having to do with tools development, 3d graphics programming, etc. It seems to be somewhere between a Technical Artist who's more technical than artist or who can code, and a Technical Director but perhaps without the seniority/experience. Information elsewhere on the position is sparse. The title seems redundant and I haven't seen any American companies post jobs by that name, exactly. One example is this job posting on gamedev.net which isn't exactly thorough. In case the link dies: Subject: Technical Programmer Frictional Games, the creators of Amnesia: The Dark Descent and the Penumbra series, are looking for a talented programmer to join the company! You will be working for a small team with a big focus on finding new and innovating solutions. We want you who are not afraid to explore uncharted territory and constantly learn new things. Self-discipline and independence are also important traits as all work will be done from home. Some the things you will work with include: 3D math, rendering, shaders and everything else related. Console development (most likely Xbox 360). Hardware implementations (support for motion controls, etc). All coding is in C++, so great skills in that is imperative. Revised Summarised Question: So, where does a programmer of this nature fit in to software development team? If I had these on my team, what tasks am I expecting them to complete? Can I ask one to build a new level editor, or optimize the rendering engine? It doesn't seem to be a "tools programmer" which focuses on producing artist tools, often in high-level languages like C#, Python, or Java. Nor does it seem to be working directly on the engine, nor a graphics programmer, as such. Yet, a strong C++ requirement, which was mirrored in other postings besides this one I quoted. Edited To Add As far as it being a low-level programmer, I had considered that but lacking from the posting was a requirement of Assembly. Instead, they tend to require familiarity with higher-level hardware APIs such as DirectX, or DirectInput. I wasn't fully clear in my original post. I think, however, that Mathew Foscarini has it right in his answer, so barring someone who definitely works with or as a "Technical Programmer" stepping in to provide a clearer explanation, I'll go with that. A generalist, which also fits the description of a more-technical-than-artist TA.

  Read the article

• CFOs: Do You Have a Playbook for Growth?

  - by Oracle Accelerate for Midsize Companies

  by Jim Lein, Oracle Midsize Programs In most global markets, CFOs are optimistic about their company's growth opportunities. Deloitte's CFO Signals Report, "Time to Accelerate" found that: In the U.K. business optimism is at its highest level in three-and-a-half years Optimism in North America rose from a strong +42% last quarter (Q2 to Q3 2013) to an even stronger +54%. The inaugural Southeast Asia survey, 44% of CFOs reported a positive outlook despite worries over the Chinese economy and political uncertainty. Sustainable and profitable business growth doesn't usually happen by accident. Company's need a playbook for growth that's owned by the CFO. And today, that playbook must leverage the six enabling technologies--Social, Big Data, Mobile, Cloud, Analytics, and The Internet of Things (or, as Oracle president Mark Hurd explains, "The Internet of the People"). On Monday June 9 at  2:00 pm Eastern, CFO.com is hosting a webcast, "The CFO Playbook on Growth: How CFOs Can Boost Efficiency and Performance with Automation". Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} “Investing in technology begins with a business metric driven business case with clear tangible business results expected," says John Lieblang, Affiliate Partner with Waterstone Management Group. "The progressive CFO has learned how to forge a partnership with the CIO to align everyone in the 'result value chain' to be accountable for the business results not just for functional technology.” Click HERE to register  Looking for more news and information about Oracle Solutions for Midsize Companies? Read the latest Oracle for Midsize Companies Newsletter Sign-up to receive the latest communications from Oracle’s industry leaders and experts Jim Lein I evangelize Oracle's enterprise solutions for growing midsize companies. I recently celebrated 15 years with Oracle, having joined JD Edwards in 1999. I'm based in Evergreen, Colorado and love relating stories about creativity and innovation whether they be about software, live music, or the mountains. The views expressed here are my own, and not necessarily those of Oracle.

  Read the article

• core.* files eating up server space (~50MB)

  - by skytreader

  I'm renting server space from someone and, upon logging in my control panel after quite sometime, noticed an abnormal spike (~50MB) in the disk usage. Upon investigating, I found a lot of core.* files scattered around my public_html directory. Each one is more than 5MB in size but no more than 6MB. The * part is all numbers (in programming regex, that should be core\.\d+). I downloaded one and checked the contents. There was a lot of balderdash characters (NUL mostly, but also a scattering of ETB, ETX, STX) but there's this block of readable text which says: This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. Pretty self-explanatory. A few blocks above the text are some more readable messages that look like logs but is sandwiched in between non printable characters. I've extracted some below. Scan not valid for mh mailboxes Bogus character 0x%x in news state Can't rewrite news state %.80s Error closing backup news state %.80s No state for newsgroup %.80s found Now, a few concerns: Am I under attack? The messages seem to be about my webmail but I don't use my personal webmail that much---only for a vanity email address and an inbox for an outdated comments system. However, lately, I seem to notice a spike in the spam for my vanity mail. (Note: the comments system is covered by a captcha but every now and then some get through. My vanity email has a spam filter but it isn't as good as I'd like). Next, if this is a feature, can I turn it off? Is it advisable to? I've only 150MB so you see why I'm fretting over a 50MB spike. Some final details: my only server-side scripts are in PHP. The directory which accumulated the most number of these core files is the one containing the Wordpress-managed subdomain of my site. I manage my server through CPanel. Lastly, I decided to delete this files and after some checking nothing seems amiss in my websites nor in my mail. They are indeed the ones responsible for the ~50MB spike as my disk space usage is back to expected.

  Read the article

• Social Networks & the Cloud

  - by kellsey.ruppel

  It’s no secret that millions of people are connected to the Internet. And it also probably doesn’t come as a surprise that a lot of those people are connected on social networking sites.  Social networks have become an excellent platform for sharing and communication that reflects real world relationships and they play a major part in the everyday lives of many people. Facebook, Twitter, Pinterest, LinkedIn, Google+ and hundreds of others have transformed the way we interact and communicate with one another. Social networks are becoming more than just an online gathering of friends. They are becoming a destination for ideation, e-commerce, and marketing. But it doesn’t just stop there. Some organizations are utilizing social networks internally, integrated with their business applications and processes and the possibility of social media and cloud integration is compelling. Forrester alone estimates enterprise cloud computing to grow to over $240 billion by 2020. It’s hard to find any current IT project today that is NOT considering cloud-based deployments. Security and quality of service concerns are no longer at the forefront; rather, it’s about focusing on the right mix of capabilities for the business. Cloud vs. On-Premise? Policies & governance models? Social in the cloud? Cloud’s increasing sophistication, security in applications, mobility, transaction processing and social capabilities make it an attractive way to manage information. And Oracle offers all of this through the Oracle Cloud and Oracle Social Network. Oracle Social Network is a secure private network that provides a broad range of social tools designed to capture and preserve information flowing between people, enterprise applications, and business processes. By connecting you with your most critical applications, Oracle Social Network provides contextual, real-time communication within and across enterprises. With Oracle Social Network, you and your teams have the tools you need to collaborate quickly and efficiently, while leveraging the organization’s collective expertise to make informed decisions and drive business forward. Oracle Social Network is available as part of a portfolio of application and platform services within the Oracle Cloud. Oracle Cloud offers self-service business applications delivered on an integrated development and deployment platform with tools to rapidly extend and create new services. Oracle Social Network is pre-integrated with the Fusion CRM Cloud Service and the Fusion HCM Cloud Service within the Oracle Cloud. Learn more how you can use Oracle Social Network to revolutionize how you create, understand, and achieve true value through enterprise social networking. And be sure to check out the follow sessions here at Oracle OpenWorld, where can learn more about Oracle Cloud and Oracle Social Network. Tuesday, Oct 2 – Oracle WebCenter’s Cloud Strategy: From Social and Platform Services to Mashups, 1:15pm - 2:15pm, Moscone West – 3001  Wednesday, Oct 3 – Oracle Social Network: Your Strategy for Socially Enabled Oracle Fusion Applications, 11:45am - 12:45pm, Moscone West – 3002/3004

  Read the article

• Best way to determine surface normal for a group of pixels?

  - by Paul Renton

  One of my current endeavors is creating a 2D destructible terrain engine for iOS Cocos2D (See https://github.com/crebstar/PWNDestructibleTerrain ). It is in an infant stages no doubt, but I have made significant progress since starting a couple weeks ago. However, I have run into a bit of a performance road block with calculating surface normals. Note: For my destructible terrain engine, an alpha of 0 is considered to not be solid ground. The method posted below works just great given small rectangles, such as n < 30. Anything above 30 causes a dip in the frame rate. If you approach 100x100 then you might as well read a book while the sprite attempts to traverse the terrain. At the moment this is the best I can come up with for altering the angle on a sprite as it roams across terrain (to get the angle for a sprite's orientation just take dot product of 100 * normal * (1,0) vector). -(CGPoint)getAverageSurfaceNormalAt:(CGPoint)pt withRect:(CGRect)area { float avgX = 0; float avgY = 0; ccColor4B color = ccc4(0, 0, 0, 0); CGPoint normal; float len; for (int w = area.size.width; w >= -area.size.width; w--) { for (int h = area.size.height; h >= -area.size.height; h--) { CGPoint pixPt = ccp(w + pt.x, h + pt.y); if ([self pixelAt:pixPt colorCache:&color]) { if (color.a != 0) { avgX -= w; avgY -= h; } // end inner if } // end outer if } // end inner for } // end outer for len = sqrtf(avgX * avgX + avgY * avgY); if (len == 0) { normal = ccp(avgX, avgY); } else { normal = ccp(avgX/len, avgY/len); } // end if return normal; } // end get My problem is I have sprites that require larger rectangles in order for their movement to look realistic. I considered doing a cache of all surface normals, but this lead to issues of knowing when to recalculate the surface normals and these calculations also being quite expensive (also how large should the blocks be?). Another smaller issue is I don't know how to properly treat the case when length is = 0. So I am stuck... Any advice from the community would be greatly appreciated! Is my method the best possible one? Or should I rethink the algorithm? I am new to game development and always looking to learn new tips and tricks.

  Read the article

• What is the most appropriate testing method in this scenario?

  - by Daniel Bruce

  I'm writing some Objective-C apps (for OS X/iOS) and I'm currently implementing a service to be shared across them. The service is intended to be fairly self-contained. For the current functionality I'm envisioning there will be only one method that clients will call to do a fairly complicated series of steps both using private methods on the class, and passing data through a bunch of "data mangling classes" to arrive at an end result. The gist of the code is to fetch a log of changes, stored in a service-internal data store, that has occurred since a particular time, simplify the log to only include the last applicable change for each object, attach the serialized values for the affected objects and return this all to the client. My question then is, how do I unit-test this entry point method? Obviously, each class would have thorough unit tests to ensure that their functionality works as expected, but the entry point seems harder to "disconnect" from the rest of the world. I would rather not send in each of these internal classes IoC-style, because they're small and are only made classes to satisfy the single-responsibility principle. I see a couple possibilities: Create a "private" interface header for the tests with methods that call the internal classes and test each of these methods separately. Then, to test the entry point, make a partial mock of the service class with these private methods mocked out and just test that the methods are called with the right arguments. Write a series of fatter tests for the entry point without mocking out anything, testing the entire functionality in one go. This looks, to me, more like "integration testing" and seems brittle, but it does satisfy the "only test via the public interface" principle. Write a factory that returns these internal services and take that in the initializer, then write a factory that returns mocked versions of them to use in tests. This has the downside of making the construction of the service annoying, and leaks internal details to the client. Write a "private" initializer that take these services as extra parameters, use that to provide mocked services, and have the public initializer back-end to this one. This would ensure that the client code still sees the easy/pretty initializer and no internals are leaked. I'm sure there's more ways to solve this problem that I haven't thought of yet, but my question is: what's the most appropriate approach according to unit testing best practices? Especially considering I would prefer to write this test-first, meaning I should preferably only create these services as the code indicates a need for them.

  Read the article

• Why are MVC & TDD not employed more in game architecture?

  - by secoif

  I will preface this by saying I haven't looked a huge amount of game source, nor built much in the way of games. But coming from trying to employ 'enterprise' coding practices in web apps, looking at game source code seriously hurts my head: "What is this view logic doing in with business logic? this needs refactoring... so does this, refactor, refactorrr" This worries me as I'm about to start a game project, and I'm not sure whether trying to mvc/tdd the dev process is going to hinder us or help us, as I don't see many game examples that use this or much push for better architectural practices it in the community. The following is an extract from a great article on prototyping games, though to me it seemed exactly the attitude many game devs seem to use when writing production game code: Mistake #4: Building a system, not a game ...if you ever find yourself working on something that isn’t directly moving your forward, stop right there. As programmers, we have a tendency to try to generalize our code, and make it elegant and be able to handle every situation. We find that an itch terribly hard not scratch, but we need to learn how. It took me many years to realize that it’s not about the code, it’s about the game you ship in the end. Don’t write an elegant game component system, skip the editor completely and hardwire the state in code, avoid the data-driven, self-parsing, XML craziness, and just code the damned thing. ... Just get stuff on the screen as quickly as you can. And don’t ever, ever, use the argument “if we take some extra time and do this the right way, we can reuse it in the game”. EVER. is it because games are (mostly) visually oriented so it makes sense that the code will be weighted heavily in the view, thus any benefits from moving stuff out to models/controllers, is fairly minimal, so why bother? I've heard the argument that MVC introduces a performance overhead, but this seems to me to be a premature optimisation, and that there'd more important performance issues to tackle before you worry about MVC overheads (eg render pipeline, AI algorithms, datastructure traversal, etc). Same thing regarding TDD. It's not often I see games employing test cases, but perhaps this is due to the design issues above (mixed view/business) and the fact that it's difficult to test visual components, or components that rely on probablistic results (eg operate within physics simulations). Perhaps I'm just looking at the wrong source code, but why do we not see more of these 'enterprise' practices employed in game design? Are games really so different in their requirements, or is a people/culture issue (ie game devs come from a different background and thus have different coding habits)?

  Read the article

• OSB unit testing, part 1 by Qualogy

  - by JuergenKress

  First you need to implement the simple bpel process like this : In my current project, I inherited a lot of OSB components that have been developed by (former) team members, but they all lack unit tests. This is a situation I really dislike, since this makes it much harder to refactor or bug-fix the existing code base. So, for all newly created components (and components I have to bug-fix) I strive to add unit tests. Of course, the unit tests will be created using my favourite testing tool: soapUI ! Unit of test The unit test should be created for the service composition, which in OSB terms should be the proxy service combination with its business service. Now, since you do not want to rely on any other services, you should provide mock services for all services invoked from your Component-Under-Test. In a previous article, I wrote about mocking your services in soapUI. While this approach would also be valid here, creating a mock service (and certainly deploying it on a separate WebServer) does violate one of the core principles of unit testing: to make your unit tests as self-contained as possible, i.e. not depending on any external components. In this article, I will show you how to achieve this by simply providing a mock response inside your unit test. Scenario The scenario I implement for testing is a simple currency converter; the external request consists of a from and a to currency, and an amount (in currency from). The service will perform an exchange rate lookup using the WebServiceX CurrencyConverter and return a response to the caller consisting of both the source and target currencies and amounts. For the purpose of unit testing, I will implement a mock response for the exchange rate lookup. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Qualogy,OSB,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Let&rsquo;s keep informed with &ldquo;Data Explorer&rdquo;

  - by Luca Zavarella

  At Pass Summit 2011 a new project was announced. It’s a Microsoft SQL Azure Lab and its codename is Microsoft “Data Explorer”. According to the official blog (http://blogs.msdn.com/b/dataexplorer/), this new tool provides an innovative way to acquire new knowledge from the data that interest you. In a nutshell, Data Explorer allows you to combine data from multiple sources, to publish and share the result. In addition, you can generate data streams in the RESTful open format (Open Data Protocol), and they can then be used by other applications. Nonetheless we can still use Excel or PowerPivot to analyze the results. Sources can be varied: Excel spreadsheets, text files, databases, Windows Azure Marketplace, etc.. For those who are not familiar with this resource, I strongly suggest you to keep an eye on the data services available to the Marketplace: https://datamarket.azure.com/browse/Data To tell the truth, as I read the above blog post, I was tempted to think of the Data Explorer as a "SSIS on Azure" addressed to the Power User. In fact, reading the response from Tim Mallalieu (Group Program Manager of Data Explorer) to the comment made to his post, I had a positive response to my first impression: “…we originally thinking of ourselves as Self-Service ETL. As we talked to more folks and started partnering with other teams we realized that would be an area that we can add value but that there were more opportunities emerging.” The typical operations of the ETL phase ( processing and organization of data in different formats) can be obtained thanks to Data Explorer Mashup. This is an image of the tool: The flexibility in the manipulation of information is given by Data Explorer Formula Language. This is a formula-based Excel-style specific language: Anyone wishing to know more can check the project page in addition to aforementioned blog: http://www.microsoft.com/en-us/sqlazurelabs/labs/dataexplorer.aspx In light of this new project, there is no doubt about the intention of Microsoft to get closer and closer to the Power User, providing him flexible and very easy to use tools for data analysis. The prime example of this is PowerPivot. The question that remains is always the same: having in a company more Power User will implicitly mean having different data models representing the same reality. But this would inevitably lead to anarchical data management... What do you think about that?

  Read the article

• Hosted Monitoring

  - by Grant Fritchey

  The concept of using services to take the place of writing a lot of your own code goes way, way back in computing history. The fundamentals of the concept go back to the dawn of computing with places like IBM hosting time-shares for computing power that you could rent for short periods of time. But things really took off with the building of the Web. Now, all the growth with virtual machines, hosted machines, hosted services from vendors like Amazon and Microsoft, the need to keep all of your software locally on physical boxes is just going the way of the dodo. There will likely always be some pieces of software that you keep on machines on your property or on your person, but the concept of keeping fundamental services locally is going away. As someone put it to me once, if you were starting a business right now, would you bother setting up an Exchange server to manage your email or would you just go to one of the external mail services for everything? For most of us (who are not Exchange admins) the answer is pretty easy. With all this momentum to having external services manage more and more of the infrastructure that’s not business unique, why would you burn up a server and license instance setting up monitoring for your SQL Servers? Of course, some of you are dealing with hyper-sensitive data that might require, through law or treaty, that you lock it down and never expose it to the intertubes, but most of us are not. So, what if someone else took on the basic hassle of setting up monitoring on your systems? That’s what we’re working on here at Red Gate. Right now it’s a private test, but we’re growing it and developing it and it’ll be going to a public beta, probably (hopefully) this year. I’m running it on my machines right now. The concept is pretty simple. You put a relay on your server, poke a hole in your firewall for it, and we start monitoring your server using SQL Monitor. It’s actually shocking how easy it is to get going. You still have to adjust your alerting thresholds, but that’s a standard part of alerting. Your pain threshold and my pain threshold for any given alert may be different. But from there, we do all the heavy lifting, keeping your data online and available, providing you with access to the information about how your servers are behaving, everything. Maybe it’s just me, but I’m really excited by this. I think we’re getting to a place where we can really help the small and medium sized businesses get a monitoring solution in place, quickly and easily. All you crazy busy, and possibly accidental, DBAs and system admins finally can set up monitoring without taking all the time to configure systems, run installs, and all the rest. You just have to tweak your alerts and you’re ready to run. If you are interested in checking it out, you can apply for the closed beta through the Monitor web page.

  Read the article

• How to configure a longer version Number in artifactory

  - by claudine

  The version-numbers for our jars have to be longer them x.x.x. We would rather need x.x.x.x to integrate some old-fashioned self-made mechanism. This is, because we tag our software with x.x.x and as soon as we have a delivery to a customer one specific jar has to be build exactly at this point of time to fit to another backend, which communicates with our program. For that reason this one jar has the version 2.3.4.1, when generated and in next delivery of the same Version it is build and named 2.3.4.2. Now artifactory cannot handle this an doesn't save more than x.x.x.2 in some cases. So we thought of maybe edit the regular expression in the maven repository layout (see attached Screenshot) Because testing the path in the field below shows, that it cannot handle the version number. Of course for the rest of our jars still x.x.x has to work.. For Example here is the maven-metadata.xml <?xml version="1.0" encoding="UTF-8"?> <metadata> <groupId>com.firm</groupId> <artifactId>someid</artifactId> <version>1.5.1</version> <versioning> <latest>1.5.1</latest> <release>1.5.1</release> <versions> <version>1.4.62</version> </versions> <lastUpdated>20120926073942</lastUpdated> </versioning> </metadata> The folder structure looks like: someid 1.4.62 1.4.62.1 1.4.62.2 1.4.62.3 If we deploy an new artifact version (1.4.62.1), the maven-metadata.xml contains the 1.4.62.1 version. But the artifactory overrides the version number (1.4.62.x) to (1.4.62) after an unspecified time. It seems that the artifactory only support major, minor and revision numbers, and deletes the buildnumber. Now we looking for a solution do disable this behavior. We use the JFrog Artifactory version 2.5.0 (rev. 13086). Any ideas, maybe? Thanks in andvance

  Read the article

• Are we queueing and serializing properly?

  - by insta

  We process messages through a variety of services (one message will touch probably 9 services before it's done, each doing a specific IO-related function). Right now we have a combination of the worst-case (XML data contract serialization) and best-case (in-memory MSMQ) for performance. The nature of the message means that our serialized data ends up about 12-15 kilobytes, and we process about 4 million messages per week. Persistent messages in MSMQ were too slow for us, and as the data grows we are feeling the pressure from MSMQ's memory-mapped files. The server is at 16GB of memory usage and growing, just for queueing. Performance also suffers when the memory usage is high, as the machine starts swapping. We're already doing the MSMQ self-cleanup behavior. I feel like there's a part we're doing wrong here. I tried using RavenDB to persist the messages and just queueing an identifier, but the performance there was very slow (1000 messages per minute, at best). I'm not sure if that's a result of using the development version or what, but we definitely need a higher throughput[1]. The concept worked very well in theory but performance was not up to the task. The usage pattern has one service acting as a router, which does all reads. The other services will attach information based on their 3rd party hook, and forward back to the router. Most objects are touched 9-12 times, although about 10% are forced to loop around in this system for awhile until the 3rd parties respond appropriately. The services right now account for this and have appropriate sleeping behaviors, as we utilize the priority field of the message for this reason. So, my question, is what is an ideal stack for message passing between discrete-but-LAN'ed machines in a C#/Windows environment? I would normally start with BinaryFormatter instead of XML serialization, but that's a rabbit hole if a better way is to offload serialization to a document store. Hence, my question. [1]: The nature of our business means the sooner we process messages, the more money we make. We've empirically proven that processing a message later in the week means we are less likely to make that money. While performance of "1000 per minute" sounds plenty fast, we really need that number upwards of 10k/minute. Just because I'm giving numbers in messages per week doesn't mean we have a whole week to process those messages.

  Read the article

• How should I refactor switch statements like this (Switching on type) to be more OO?

  - by Taytay

  I'm seeing some code like this in our code base, and want to refactor it: (Typescript psuedocode follows): class EntityManager{ private findEntityForServerObject(entityType:string, serverObject:any):IEntity { var existingEntity:IEntity = null; switch(entityType) { case Types.UserSetting: existingEntity = this.getUserSettingByUserIdAndSettingName(serverObject.user_id, serverObject.setting_name); break; case Types.Bar: existingEntity = this.getBarByUserIdAndId(serverObject.user_id, serverObject.id); break; //Lots more case statements here... } return existingEntity; } } The downsides of switching on type are self-explanatory. Normally, when switching behavior based on type, I try to push the behavior into subclasses so that I can reduce this to a single method call, and let polymorphism take care of the rest. However, the following two things are giving me pause: 1) I don't want to couple the serverObject with the class that is storing all of these objects. It doesn't know where to look for entities of a certain type. And unfortunately, the identity of a type of ServerObject varies with the type of ServerObject. (So sometimes it's just an ID, other times it's a combination of an id and a uniquely identifying string, etc). And this behavior doesn't belong down there on those subclasses. It is the responsibility of the EntityManager and its delegates. 2) In this case, I can't modify the ServerObject classes since they're plain old data objects. It should be mentioned that I've got other instances of the above method that take a parameter like "IEntity" and proceed to do almost the same thing (but slightly modify the name of the methods they're calling to get the identity of the entity). So, we might have: case Types.Bar: existingEntity = this.getBarByUserIdAndId(entity.getUserId(), entity.getId()); break; So in that case, I can change the entity interface and subclasses, but this isn't behavior that belongs in that class. So, I think that points me to some sort of map. So eventually I will call: private findEntityForServerObject(entityType:string, serverObject:any):IEntity { return aMapOfSomeSort[entityType].findByServerObject(serverObject); } private findEntityForEntity(someEntity:IEntity):IEntity { return aMapOfSomeSort[someEntity.entityType].findByEntity(someEntity); } Which means I need to register some sort of strategy classes/functions at runtime with this map. And again, I darn well better remember to register one for each my my types, or I'll get a runtime exception. Is there a better way to refactor this? I feel like I'm missing something really obvious here.

  Read the article

• CA2000 and disposal of WCF client

  - by Mayo

  There is plenty of information out there concerning WCF clients and the fact that you cannot simply rely on a using statement to dispose of the client. This is because the Close method can throw an exception (i.e. if the server hosting the service doesn't respond). I've done my best to implement something that adheres to the numerous suggestions out there. public void DoSomething() { MyServiceClient client = new MyServiceClient(); // from service reference try { client.DoSomething(); } finally { client.CloseProxy(); } } public static void CloseProxy(this ICommunicationObject proxy) { if (proxy == null) return; try { if (proxy.State != CommunicationState.Closed && proxy.State != CommunicationState.Faulted) { proxy.Close(); } else { proxy.Abort(); } } catch (CommunicationException) { proxy.Abort(); } catch (TimeoutException) { proxy.Abort(); } catch { proxy.Abort(); throw; } } This appears to be working as intended. However, when I run Code Analysis in Visual Studio 2010 I still get a CA2000 warning. CA2000 : Microsoft.Reliability : In method 'DoSomething()', call System.IDisposable.Dispose on object 'client' before all references to it are out of scope. Is there something I can do to my code to get rid of the warning or should I use SuppressMessage to hide this warning once I am comfortable that I am doing everything possible to be sure the client is disposed of? Related resources that I've found: http://www.theroks.com/2011/03/04/wcf-dispose-problem-with-using-statement/ http://www.codeproject.com/Articles/151755/Correct-WCF-Client-Proxy-Closing.aspx http://codeguru.earthweb.com/csharp/.net/net_general/tipstricks/article.php/c15941/

  Read the article

• Error message: "Two different contracts have the same ConfigurationName" when downloading wsdl from

  - by rwwilden

  I get the following error message when I try to use svcutil to generate a client proxy for a xamlx file that is hosted by AppFabric beta 2: Two different contracts have the same ConfigurationName I understand the message, however, I cannot find its cause or how to fix it. I'm following the 'Introduction to Workflow Services' lab from the VS2010RC training kit. The web application has two services: SubmitApplication.xamlx and EducationScreening.xamlx. I'm not sure why but both of them have four endpoints. If I take a look via the AppFabric Dashboard in IIS Mgmt Studio: basicHttpBinding (Contract: *) (Type: Application(Default)) netNamedPipeBinding (Contract: System.ServiceModel.Activities.IWorkflowInstanceManagement) (Type: System (workflowControlEndpoint)) netNamedPipeBinding (Contract: *) (Type: Application (Default)) serviceMetadataHttpGetBinding (Contract: serviceMetadataHttpGetContract) (Type: System (serviceMetadataEndpoint)) When taking a look at the SubmitApplication.xamlx in a browser, I see the following stacktrace: [InvalidOperationException: Two different contracts have the same ConfigurationName.] System.ServiceModel.Activities.WorkflowServiceHost.CreateDescription(IDictionary`2& implementedContracts) +361 System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +174 System.ServiceModel.Activities.WorkflowServiceHost.InitializeDescription(WorkflowService serviceDefinition, UriSchemeKeyedCollection baseAddresses) +82 System.ServiceModel.Activities.WorkflowServiceHost.InitializeFromConstructor(WorkflowService serviceDefinition, Uri[] baseAddresses) +206 System.ServiceModel.Activities.Activation.WorkflowServiceHostFactory.CreateWorkflowServiceHost(WorkflowService service, Uri[] baseAddresses) +43 System.ServiceModel.Activities.Activation.WorkflowServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) +974 System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423 System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50 System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132 [ServiceActivationException: The service '/HRApplicationServices/SubmitApplication.xamlx' cannot be activated due to an exception during compilation. The exception message is: Two different contracts have the same ConfigurationName..] System.Runtime.AsyncResult.End(IAsyncResult result) +889824 System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +179150 System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107 Can anyone tell me what I'm doing wrong? I haven't configured any of the bindings myself. The BasicHttpBinding is what you get by default in .NET 4 when hosting a service inside a web application. The other bindings are configured by AppFabric. I can't find their configuration anywhere. Kind regards, Ronald Wildenberg

  Read the article

< Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >