Search Results

Search found 33357 results on 1335 pages for 'terminal app'.

Page 493/1335 | < Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >

  • What the different hardware temperatures listed in psensor, sensor viewer etc reffer to?

    - by cipricus
    I have installed psensor and see a list of temperatures, but listed as ”Temperature 1”, 2, 3 etc . I can only guess where the processor is: but who's who for sure? The same question stands for Sensors Viewer. I can also type sensors in Terminal but I get no more than that acpi -t gives Thermal 0: ok, 65.0 degrees C Thermal 1: ok, 37.9 degrees C Thermal 2: ok, 56.0 degrees C Thermal 3: active, 71.0 degrees C Considering psensor, I know for a fact that: - the temperature that varies most depending on the CPU use is Temp1 and it is one of the two highest - the other high temperature is Temp4 and it goes to the ceiling when using youtube/flash - Temp2 is very stable at a medium level of 50-60 degrees Celsius - Temp3 is by far the lowest and most imobile So, I guess Temp1 is the CPU temperature, and Temp4 is the GPU temperature. Temp2 and 3 must be the motherboard and the hdd. Does anybody know for sure?

    Read the article

  • Folding at home refusing connection?

    - by user49191
    I am having a slight problem. I love contributing to folding at home, if some of you dont know what it is, it's a program that downloads work from the stanford university servers, has your computer process it (takes about 12 hours for 1 assignment depending on the processor, and then uploads it back. The problem with mine is that when I run FAHControl in terminal, it says Error 111 connection refused. This doesnt happen when i run folding at home on windows. Can someone tell me how to fix this? Thanks.

    Read the article

  • netflix on ubuntu 12.04

    - by tsi25
    So I have got Ubuntu 12.04 on a system 76 lemur ultra laptop. I installed netflix via terminal with the following chain of commands: sudo apt-get update sudo apt-add-repository ppa:ehoover/compholio sudo apt-get update sudo apt-get install netflix-desktop when it was finished installing, I clicked the icon and something came up asking if you want to install some dependent software, but wouldn't let me interact with the window - so I hit tab and worked my way through that. But my computer shutdown before I could fully install GECKO. Now I have the netflix icon, but when i click it or right click it nothing happens. I had tried uninstalling it with the following commands, sudo apt-add --purge remove netflix-desktop and then reinstalling it but there's no change. does anyone know what I can do to get netflix to run from here? or what I can do to start troubleshooting? I searched around on AskUbuntu but couldn't find any answers to this specific problem.

    Read the article

  • convert video file to .ogg

    - by Levan
    I've been having trouble with this because I'm new to Linux: I would like to convert different video formats to ogv. I found some terminal commands like this: ffmpeg -i input.avi -acodec libvorbis -ac 1 -b 768k output.ogg The problem with these type of commands is that they are intended to change bit rate, fps, or even resolution. I would like to just change the file format without changing anything else about the video. I looked at the man pages for ffmpeg and found some useful info but I don't know how to space command-line options. Are there any easy ways to do this? In addition, is there a command to change the bit rate so that it doesn't go over a certain rate?

    Read the article

  • I cant see my windows drive in ubuntu

    - by Shardul Dhande
    I'm n00ber than any n00b you ever seen, so bear with me... I just downloaded wubi and installed ubuntu 12.10 along with Windows 7 on the same HDD. Linux works fine, but doesnt show files from drive C (on which it is installed). I really need C as it contains all my files. I did df -h in the terminal. It does show the drive. /dev/sda2 577G 220G 358G 38% /host Now I tried to mount the drive sudo mount /dev/sda2 and got the response mount: /dev/sda2 already mounted or /host busy mount: according to mtab, /dev/sda2 is already mounted on /host I dont know what that means. The drive doesnt show up in HOME FOLDER. What am i supposed to do now?

    Read the article

  • Unity Launcher and Menu Bar disappeared in 14.04

    - by Justice2497
    The menu bar and Unity launcher have disappeared in Ubuntu 14.04. Also cannot access the terminal via ctrl + alt + t. I have tried every solution for this issue that I can find, from re-installing untiy and compiz to resetting Unity and everything. I've gone into the compiz manager and reactived Unity. Nothing has worked. When trying to reset Unity, or do anything with it really, I get this message (process:6332): dconf-WARNING **: failed to commit changes to dconf: Could not connect: Connection refused EDIT: Installed 14.04 a day ago. The issue happened after a reboot. After installing virtual Box

    Read the article

  • Toshiba satellite L500 no Wifi anymore!

    - by Benjamin Piller
    I have a Toshiba Satellite L500 with Ubuntu 12.04 and its wifi suddenly stopped working!! I've never seen like that before.. I tried also using external USB wifis but no success. I am not able to turn it on with the function keys nor using rfkill commands and similar WLAN manipulator Commands in the terminal! It was working before for at least 4-5 months!! The computer says it's turned off by hardware. I checked it and the Driver is fine. So why can i not use any Wifi on my computer?? Why it is suddenly disabled? I checked the BIOS too there is enabled the WLAN. I spent 10 hours for searching for solutions but i am out of ideas!!! Please Help!

    Read the article

  • Problem installing LibreOffice; please help!

    - by EmmyS
    I followed the instructions for installing LibreOffice found here, which are basically the same instructions found all over askubuntu and the web in general. I followed the instructions (including removing OO first) for gnome; all that is in my Applications menu now is LibreOffice (OO used to have OpenOffice Spreadsheet, OpenOffice Presentation, etc.) When I open LibreOffice, I get the splash screen/menu, but all of the choices for creating new docs are greyed out. It also will not open any office/type files (no errors; they just don't open.) The terminal commands indicated that installation was successful, but obviously something is missing. I'm guessing I can just reinstall OO from the software center, but I'd really like to give LibreOffice a try, given the lack of ongoing development on OO. Can anyone help me out?

    Read the article

  • Ripping MP3s in Rhythmbox Ubuntu 12.10 (64 bit)?

    - by James Fellows Yates
    I installed a couple of days ago Ubuntu 12.10 (64 bit). I today tried ripping a CD in the MP3 format. However, whenever I try to rip, it says it is missing an extra multimedia plugin "Gstreamer extra plug-ins (i386)". I then try to install the :i386 version of the gstreamer-ugly plugins, but then I get the same problem but with the id3-demuxer (or something similar) The Terminal output I get from both problems (but replace the "MPEG-1 Layer 3 (MP3) encoder" with the "ID3-demuxer" name) is: james@clefairy:~$ rhythmbox (rhythmbox:24122): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed Rhythmbox-Message: Missing plugin: gstreamer|0.10|rhythmbox|MPEG-1 Layer 3 (MP3) encoder|encoder-audio/mpeg, mpegversion=(int)1, layer=(int)3 /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed import gobject._gobject It doesn't help that each time I have to install/remove the entire Gstreamer-ugly collection each time - I can't find that specific file. The CD plays fine, it's the ripping plugin that doesn't seem to work. I didn't have this problem previously on 12.04 (64 bit).

    Read the article

  • how to find available wireless networks

    - by Quinn
    I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

    Read the article

  • Cinnamon Settings blank after update

    - by Seth Balmore
    Using Ubuntu 12.04 with the cinnamon desktop, I installed the most recent updates and now when I open "System Settings" the entire window appears as a blank white screen. The headers for APPEARANCE, PREFERENCES, and HARDWARE are present, but the usual icons for *Background, *Hot Corners, *Printers, etc. are no longer visible. Some of these settings can still be altered via the terminal: cinnamon-settings backgrounds cinnamon-settings applets cinnamon-settings mouse and touchpad But other commands, such as cinnamon-settings hot corners are met with an error. This is obviously a problem with cinnamon, so I just want to bring it to attention and find out when they plan on fixing the bug. A workaround can be found on the web, but it seems way to risky to rely on.

    Read the article

  • Installing drivers for an ATI 6950 in Ubuntu

    - by aj.esler
    Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

    Read the article

  • Installing drivers for an ATI 6950

    - by aj.esler
    Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

    Read the article

  • Upgrade to Quantal unity top bar, side bar, and window declorations missing

    - by Nicky Bailuc
    I upgraded from 12.04.1 to 12.10 via the Update Manager and the upgrade said it completed successfuly. However after rebooting the unity task bar was missing along with the launch bar and the window declorations. All compiz settings seemed to be purge deleted, and at first bootup it gave me a system error. The desktop exists, and once I remember I messed up the compiz settings and just had to press Ctrl+Alt+F1 and in the virtual terminal type "unity --reset" then "sudo reboot". Everything worked as if i reinstalled the entire operating system. This time it said “Warning no variable set. setting to :0. The reset option is now dupricated”. What am I suppose to do now? I need this fixed as soon as possible because I need a couple of certainly installed programs and the data within them (long story short).

    Read the article

  • Soft lockup after upgrade - cannot install from live CD

    - by nbm
    I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

    Read the article

  • No root partition

    - by christian ashton
    I'm having serious problems trying to install ubuntu 14.04 on my Toshiba Satellite C850 laptop. Whenever I try to install it it says "No root file system found. Please correct this error from the partitioning menu." I've tried to create new partitions but I don't know what size to make them etc. can someone please help me on this? (Is there a way to create partitions through the terminal? I'm new to ubuntu) but i was on it 2 days ago, laptops crashed and now I can't get past the installation. I've created a new partitioning table just need guidance on which partitions to create and how big to make them. I have absolutely no partitions whatsoever on my hard drive (or whatever the partitions are part of) so it will need to be from the very start. Thanks in advance!

    Read the article

  • No GUI, No internet connection, please help 12.04

    - by KB_
    I am new to Ubuntu and I tried to install ubuntu server 12.04 on my laptop. now my problem is - I am unable to connect to the internet (I have wifi ONLY connection). ubuntu didn't recognize my built-in wifi on my Toshiba Satellite L505. There is no GUI. I have Terminal only, I tried Sudo apt-get update but i am getting errer msg because of no connection. 1. I need to know if there is any possible way that i can download and install driver for my wifi. 2. what other option do i have to be able to update ubuntu. Thanks KB

    Read the article

  • After the update today no graphical interface anymore - 12.04

    - by Mark
    I installed the updates through the update manager today. I shut down my Laptop and now after starting it up again, I only get terminal access to advices. Grub is loading fine and after I picked Ubuntu 12.04 the screen get blank and I am asked to log in with my username and password in command line mode. If I log in I am still in command line mode. How do I get the "normal (graphical)" Ubuntu back? I hope you know what I mean. Since English is not my first language I can't explain this the way I would like to. Mark

    Read the article

  • Why doesn't 12.04 recognize my ATI Radeon X300SE graphics card?

    - by Nomad Zero
    So far everything including the BCM4321 card is working, however, the OEM ATI Radeon X300SE (RV370) is not recognized. When I go into system details the card comes up as unknown. When I run lspci the card shows up as: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV370 5B60 [Radeon X300 (PCIE)] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV370 [Radeon X300SE] I have attempted check Additional Drivers but the card does not show up as needing a driver. So far this is causing the system to run warmer as the processor is doing a bit of the work to run Unity and any full screen videos tend to be rather choppy. Is there an available driver that will fix my issue and what is the install method? I am not scared to run a terminal so no worries there, as long as I have instructions, I can find my way. I am running under 12.04 LTS Kernel 3.2.0-25-generic-pae

    Read the article

  • "sudo apt -get install foo-" causes removing foo package and everything depends on it

    - by M.Elmi
    While working in command prompt, I accidentally typed following command: sudo apt-get install python3- and ubuntu started removing python3 and everything depends on it (including firefox and much more). Fortunately I closed that terminal immediately and reverted everything by checking dpkg log file, but I was wondering why an install command should act like remove? Is it a bug? Consider the situation that you are looking for a package name (pressing Tab twice) and going through possibilities by pressing Enter key and those Enter keys remain in the keyboard buffer and.... youhaaaa... apt-get is removing the entire installation in front of your eyes.

    Read the article

  • xmonad keyboard doesn't work

    - by Mikkel Paulson
    I'm experimenting with xmonad, which I installed from the Ubuntu Software Centre on Ubuntu 12.10. It looks cool, but when I invoke it (using xmonad --replace from the command line) my title bars disappear and my keyboard stops working. At all. The terminal stops working, the keystrokes I've seen in online "getting started" guides are ignored, and the only way for me to actually power the system off is to hit the reset button or ssh in from my phone. Ironically, my mouse still works. One guide I saw suggested replacing the default window environment with xmonad, but I'm afraid of rendering my system completely inoperable if I do that. Any suggestions?

    Read the article

  • Steam, launching Team Fortress 2: libGL.so.1: wrong ELF class: ELFCLASS64

    - by stefanhgm
    After I got Steam running with the workaround mentioned here, I've got nearly the same problem when launching Team Fortress 2. After starting it from Steam the "Launcher" pops up and after a few seconds it disappears with the following error in the terminal: /home/user/Steam/SteamApps/steamuser/Team Fortress 2/hl2_linux: error while loading shared libraries: libGL.so.1: wrong ELF class: ELFCLASS64 Game removed: AppID 440 "Team Fortress 2", ProcID 5299 saving roaming config store to 'sharedconfig.vdf' roaming config store 2 saved successfully Because of the similarity with the workaround I used before, I tried to execute: export LD_LIBRARY_PATH=/usr/lib32:$LD_LIBRARY_PATH directly before launching the game, but there is no difference.

    Read the article

  • Laptop works fine with ac adapter, hangs after login screen using battery

    - by tavoton
    I did an Ubuntu 10.10 Desktop Edition clean install (amd64 version) on a notebook Medion Akoya E1311. With AC adapter everything works fine, but using battery, it hangs after login screen. I can type login, password too, and I can press login button. But then I can see mouse cursor and lower task bar, not upper, and nothing works. The only thing I can do is login on a terminal with ctrl+alt+F1, this is ok. Nothing seems alive on Gnome except mouse cursor. The only thing I did after Ubuntu fresh install was donwloading driver for RTL8191SE from Realtek web, because WiFi didn't work, now works fine, with ac adapter of course. Hardware is a Notebook Medion Akoya E1311 AMD Sempron 210U 1 GB DDR2 ATI RS690M (Radeon X1200 Series) Western Digital 160GB wireless RTL8191SEvB ethernet RTL8101E/RTL8102E

    Read the article

  • No keyring secrets found for [ssid] /802-11-wireless-security, ubuntu 12.04

    - by acimer
    I'm on Ubuntu 12.04 x64bit, installed it couple of days ago. The issue i'm having is this: on startup it connects to my wireless without a problem, but after a while I am disconnected and prompted to enter the key for the wireless network (which is entered - saved) so i just click 'ok', but wireless doesn't connect again. Reseting network manager doesn't help either. Only restart, after which, ubuntu connects to the said wireless without a problem. Terminal outputs this error message: ** Message: No keyring secrets found for cimermanovic /802-11-wireless-security; asking user. cimermanovic is the ssid name. also, here are some error messages that network manager is giving: (nm-applet:31926): GdkPixbuf-CRITICAL **: gdk_pixbuf_scale_simple: assertion `dest_width 0' failed (nm-applet:31693): GdkPixbuf-CRITICAL **: gdk_pixbuf_scale_simple: assertion `dest_width 0' failed (nm-applet:30184): GdkPixbuf-CRITICAL **: gdk_pixbuf_scale_simple: assertion `dest_width 0' failed What should i do to fix this? Thanks!

    Read the article

  • Why I cannot mount ISO file from this .desktop file by `fuseiso`?

    - by Kevin Dong Nai Jia
    I want to mount iso files without root permission by fuseiso, and this is how to mount a iso file: fuseiso -p '/path/to/isofilename' '/media/isofilename' , so I make a .desktop file followed Freedesktop Standard (The Exec key) as bellow: #!/usr/bin/env xdg-open [Desktop Entry] Name=Mount ISO image Name[zh_TW]=??????? Exec=fuseiso -p %U "/media/$(basename %U)" Terminal=false MimeType=application/x-cd-image , but it failed. I think it failed because of $(basename %U), if it is changed to a fixed string, the iso file can be mounted. How can I solve this problem?

    Read the article

< Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >