Search Results

Search found 32375 results on 1295 pages for 'dnn module development'.

Page 494/1295 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

  • How to prevent multiple playing sounds from destroying your hearing?

    - by Rookie
    The problem is that when I play 100 sounds almost at same time, all I hear is noise. It's not very attractive to listen it for 30 minutes straight. I tried to fix this by allowing only 1 sound of each sound type to be played at once. But it still sounds really ugly; eventually my brain keeps hearing only the very end of the shot sounds (or the start of it?), and that gets on my nerves really quickly. Eventually I would just decide to turn off the sounds completely. So is there any point of using sounds in a game like this at all? How does our dear reality handle this problem? If there is a war out there, how does it sound when hundred of men shoot almost at the same times? Edit: Here is how the game sounds currently; there isn't even 100 sounds playing at once, maybe 20? http://www.speedyshare.com/VTBDw/headache.mp3 At the beginning it sounds OK, but then it becomes unbearable! In that audio clip there is allowed only 1 sound to be played at once, so it will stop the previous playing sound when new sound is played. Edit2: And here is same headache but 32 simultaneous sounds allowed to be played at same time: http://www.speedyshare.com/TuWAR/headache-worse.mp3 Quite a torture, eh?

    Read the article

  • How to handle multiple effect files in XNA

    - by Adam 'Pi' Burch
    So I'm using ModelMesh and it's built in Effects parameter to draw a mesh with some shaders I'm playing with. I have a simple GUI that lets me change these parameters to my heart's desire. My question is, how do I handle shaders that have unique parameters? For example, I want a 'shiny' parameter that affects shaders with Phong-type specular components, but for an environment mapping shader such a parameter doesn't make a lot of sense. How I have it right now is that every time I call the ModelMesh's Draw() function, I set all the Effect parameters as so foreach (ModelMesh m in model.Meshes) { if (isDrawBunny == true)//Slightly change the way the world matrix is calculated if using the bunny object, since it is not quite centered in object space { world = boneTransforms[m.ParentBone.Index] * Matrix.CreateScale(scale) * rotation * Matrix.CreateTranslation(position + bunnyPositionTransform); } else //If not rendering the bunny, draw normally { world = boneTransforms[m.ParentBone.Index] * Matrix.CreateScale(scale) * rotation * Matrix.CreateTranslation(position); } foreach (Effect e in m.Effects) { Matrix ViewProjection = camera.ViewMatrix * camera.ProjectionMatrix; e.Parameters["ViewProjection"].SetValue(ViewProjection); e.Parameters["World"].SetValue(world); e.Parameters["diffuseLightPosition"].SetValue(lightPositionW); e.Parameters["CameraPosition"].SetValue(camera.Position); e.Parameters["LightColor"].SetValue(lightColor); e.Parameters["MaterialColor"].SetValue(materialColor); e.Parameters["shininess"].SetValue(shininess); //e.Parameters //e.Parameters["normal"] } m.Draw(); Note the prescience of the example! The solutions I've thought of involve preloading all the shaders, and updating the unique parameters as needed. So my question is, is there a best practice I'm missing here? Is there a way to pull the parameters a given Effect needs from that Effect? Thank you all for your time!

    Read the article

  • How to remove seams from a tile map in 3D?

    - by Grimshaw
    I am using my OpenGL custom engine to render a tilemap made with Tiled, using a well spread tileset from the web. There is nothing fancy going on. I load the TMX file from Tiled and generate vertex arrays and index arrays to render the tilemap. I am rendering this tilemap as a wall in my 3D world, meaning that I move around with a fly camera in my 3D world and at Z=0 there is a plane showing me my tiles. Everything is working correctly but I get ugly seems between the tiles. I've tried orthographic and perspective cameras and with either I found particular sets of parameters for the projection and view matrices where the artifacts did not show, but otherwise they are there 99% of the time in multiple patterns, depending on the zoom and camera parameters like field of view. Here's a screenshot of the artifact being shown: http://i.imgur.com/HNV1g4M.png Here's the tileset I am using (which Tiled also uses and renders correctly): http://i.imgur.com/SjjHK4q.png My tileset has no mipmaps and is set to GL_NEAREST and GL_CLAMP_TO_EDGE values. I've looked around many articles in the internet and nothing helped. I tried uv correction so the uv fall at half of the texel, rather than the end of the texel to prevent interpolating with the neighbour value(which is transparency). I tried debugging with my geometry and I verified that with no texture and a random color in each tile, I don't seem to see any seams. All vertices have integer coordinates, i.e, the first tile is a quad from (0,0) to (1,1) and so on. Tried adding a little offset both to the UV and to the vertices to see if the gaps cease to exist. Disabled multisampling too. Nothing fixed it so far. Thanks.

    Read the article

  • Particle and Physics problem.

    - by Quincy
    This was originally a forum post so I hope you guys don't mind it being 2 questions in one. I am making a game and I got some basic physics implemented. I have 2 problems, 1 with particles being drawn in the wrong place and one with going through walls while jumping in corners. Skip over to about 15 sec video showing the 2 problems : http://youtube.com/watch?v=Tm9nfWsWfiM So the problem with the particles seems to be coming from the removal, as soon as I remove that piece of code it instantly works, but there shouldn't be a problem since they shouldn't even draw when their energy gets to 0 (and then they get removed) So my first question is, how are these particles getting warped all over the screen ? Relevant code : Particle class : class Particle { //Physics public Vector2 position = new Vector2(0,0); public float direction = 180; public float speed = 100; public float energy = 1; protected float startEnergy = 1; //Visual public Sprite sprite; public float rotation = 0; public float scale = 1; public byte alpha = 255; public BlendMode blendMode { get { return sprite.BlendMode; } set { sprite.BlendMode = value; } } public Particle() { } public virtual void Think(float frameTime) { if (energy - frameTime < 0) energy = 0; else energy -= frameTime; position += new Vector2((float)Math.Cos(MathHelper.DegToRad(direction)), (float)Math.Sin(MathHelper.DegToRad(direction))) * speed * frameTime; alpha = (byte)(255 * energy / startEnergy); sprite.Rotation = rotation; sprite.Position = position; sprite.Color = new Color(sprite.Color.R, sprite.Color.G, sprite.Color.B, alpha); } public virtual void Draw(float frameTime) { if (energy > 0) { World.camera.DrawSprite(sprite); } } // Basic particle implementation class BasicSprite : Particle { public BasicSprite(Sprite _sprite) { sprite = _sprite; } } Emitter : class Emitter { protected static Random rand = new Random(); protected List<Particle> particles = new List<Particle>(); public BaseEntity target = null; public Vector2 position = new Vector2(0, 0); public bool Active = true; public float timeAlive = 0; public int particleCount = 0; public int ParticlesPerSeccond { get { return (int)(1 / particleSpawnTime); } set { particleSpawnTime = 1 / (float)value; } } public float dieTime = float.MaxValue; float particleSpawnTime = 0.05f; float spawnTime = 0; public Emitter() { } public virtual void Think(float frametime) { spawnTime += frametime; if (dieTime != float.MaxValue) { timeAlive += frametime; if (timeAlive >= dieTime) Active = false; } if (Active) { if (target != null) position = target.Position; while (spawnTime > particleSpawnTime) { spawnTime -= particleSpawnTime; AddParticle(); particleCount++; } } for (int i = 0; i < particles.Count; i++) { particles[i].Think(frametime); if (particles[i].energy <= 0) { particles.Remove(particles[i]); // As soon as this is removed, it works particleCount--; } } } public virtual void AddParticle() { } public virtual void Draw(float frametime) { foreach (Particle particle in particles) { particle.Draw(frametime); } } } class BloodEmitter : Emitter { Image image; public BloodEmitter() { image = new Image(@"Content/Particles/TinyCircle.png"); image.CreateMaskFromColor(new Color(255, 0, 255, 255)); this.dieTime = 0.5f; this.ParticlesPerSeccond = 100; } public override void AddParticle() { Sprite sprite = new Sprite(image); sprite.Color = new Color((byte)(rand.NextDouble() * 255), (byte)(rand.NextDouble() * 255), (byte)(rand.NextDouble() * 255)); BasicSprite particle = new BasicSprite(sprite); particle.direction = (float)rand.NextDouble() * 360; particle.position = position; particle.blendMode = BlendMode.Alpha; particles.Add(particle); } } The seccond problem is the physics problem, for some reason I can get through the right bottom corner while jumping. I think this is coming from me switching animations but I thought I made it compensate for that. Relevant code : PhysicsEntity : class PhysicsEntity : BaseEntity { // Horizontal movement constants protected const float maxHorizontalSpeed = 1000; protected const float horizontalAcceleration = 15; protected const float horizontalDragAir = 0.95f; protected const float horizontalDragGround = 0.95f; // Vertical movement constants protected const float maxVerticalSpeed = 1000; protected const float verticalAcceleration = 20; // Everything needed for movement and correct animations protected float movement = 0; protected bool onGround = false; protected Vector2 Velocity = new Vector2(0, 0); protected float maxSpeed = 0; float lastThink = 0; float thinkTime = 1f/60f; public PhysicsEntity(Vector2 position, Sprite sprite) : base(position, sprite) { } public override void Draw(float frameTime) { base.Draw(frameTime); } public override void Think(float frameTime) { CalculateMovement(frameTime); base.Think(frameTime); } protected void CalculateMovement(float frameTime) { lastThink += frameTime; while (lastThink > thinkTime) { onGround = false; Velocity.X = MathHelper.Clamp(Velocity.X + horizontalAcceleration * movement, -maxHorizontalSpeed, maxHorizontalSpeed); if (onGround) Velocity.X *= horizontalDragGround; else Velocity.X *= horizontalDragAir; if (maxSpeed < Velocity.X) maxSpeed = Velocity.X; Velocity.Y = MathHelper.Clamp(Velocity.Y + verticalAcceleration, -maxVerticalSpeed, maxVerticalSpeed); lastThink -= thinkTime; DoCollisions(thinkTime); DoAnimations(thinkTime); } } public virtual void DoAnimations(float frameTime) { } public void DoCollisions(float frameTime) { Position.Y += Velocity.Y * frameTime; Vector2 tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.Y += collisionDepth.Y; if (collisionDepth.Y < 0) onGround = true; Velocity.Y = 0; } Position.X += Velocity.X * frameTime; tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.X += collisionDepth.X; Velocity.X = 0; } } public void DoCollisions(Vector2 difference) { CollisionRectangle.Y = Position.Y - difference.Y; CollisionRectangle.Height += difference.Y; Vector2 tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.Y += collisionDepth.Y; if (collisionDepth.Y < 0) onGround = true; Velocity.Y = 0; } CollisionRectangle.X = Position.X - difference.X; CollisionRectangle.Width += difference.X; tileCollision = GetTileCollision(); if (tileCollision.X != -1 || tileCollision.Y != -1) { Vector2 collisionDepth = CollisionRectangle.DepthIntersection( new Rectangle( tileCollision.X * World.tileEngine.TileWidth, tileCollision.Y * World.tileEngine.TileHeight, World.tileEngine.TileWidth, World.tileEngine.TileHeight ) ); Position.X += collisionDepth.X; Velocity.X = 0; } } Vector2 GetTileCollision() { int topLeftTileX = (int)(CollisionRectangle.TopLeft.X / World.tileEngine.TileWidth); int topLeftTileY = (int)(CollisionRectangle.TopLeft.Y / World.tileEngine.TileHeight); int BottomRightTileX = (int)(CollisionRectangle.DownRight.X / World.tileEngine.TileWidth); int BottomRightTileY = (int)(CollisionRectangle.DownRight.Y / World.tileEngine.TileHeight); if (CollisionRectangle.DownRight.Y % World.tileEngine.TileHeight == 0) // If your exactly against the tile don't count that as being inside the tile BottomRightTileY -= 1; if (CollisionRectangle.DownRight.X % World.tileEngine.TileWidth == 0) // If your exactly against the tile don't count that as being inside the tile BottomRightTileX -= 1; for (int i = topLeftTileX; i <= BottomRightTileX; i++) { for (int j = topLeftTileY; j <= BottomRightTileY; j++) { if (World.tileEngine.TileIsSolid(i, j)) { return new Vector2(i, j); } } } return new Vector2(-1, -1); } } Player : enum State { Standing, Running, Jumping, Falling, Sliding, WallSlide } class Player : PhysicsEntity { private State state { get { return currentState; } set { if (currentState != value) { currentState = value; animationChanged = true; } } } private State currentState = State.Standing; private BasicEmitter basicEmitter = new BasicEmitter(); public bool flipped; public bool animationChanged = false; protected const float jumpPower = 600; AnimationManager animationManager; Rectangle DrawRectangle; public override Rectangle CollisionRectangle { get { return new Rectangle( Position.X - DrawRectangle.Width / 2f, Position.Y - DrawRectangle.Height / 2f, DrawRectangle.Width, DrawRectangle.Height ); } } public Player(Vector2 position, Sprite sprite) : base(position, sprite) { // Only posted the relevant bit DrawRectangle = animationManager.currentAnimation.drawingRectangle; } public override void Draw(float frameTime) { World.camera.DrawSprite( Sprite, Position + new Vector2(DrawRectangle.X, DrawRectangle.Y), animationManager.currentAnimation.drawingRectangle ); } public override void Think(float frameTime) { //I only posted the relevant stuff if (animationChanged) { // if the animation has changed make sure we compensate for the change in with and height animationChanged = false; DoCollisions(animationManager.getSizeDifference()); } DoCustomMovement(); base.Think(frameTime); if (!onGround && Velocity.Y > 0) { state = State.Falling; } } void DoCustomMovement() { if (onGround) { if (World.renderWindow.Input.IsKeyDown(KeyCode.W)) { Velocity.Y = -jumpPower; state = State.Jumping; } } } public override void DoAnimations(float frameTime) { string stateName = Enum.GetName(typeof(State), state); if (!animationManager.currentAnimationIs(stateName)) { animationManager.PlayAnimation(stateName); } animationManager.Think(frameTime); DrawRectangle = animationManager.currentAnimation.drawingRectangle; Sprite.Center = new Vector2( DrawRectangle.X + DrawRectangle.Width / 2, DrawRectangle.Y + DrawRectangle.Height / 2 ); Sprite.FlipX(flipped); } So why am I warping through walls ? I have given this some thought but I just can't seem to find out why this is happening. Full source if needed : source : http://www.mediafire.com/?rc7ddo09gnr68zd (download link)

    Read the article

  • Blender: How to "meshify" an object I made from Bezier curves

    - by capcom
    I made a star shape using Bezier curves, and extruded it (see pic below): What I want to do is give it a rounder look - not just around the edges by using beveling. I want it to kind of look like this (well, that shape anyway): How would I go about doing this? Please keep in mind that I am extremely new to Blender. I thought that I could somehow turn this star into those default shapes that have tonnes of squares which I could pull out, and apply a mirror to it so that the same thing happens on both sides. I really don't know how to do it, and would appreciate your help.

    Read the article

  • Rotate a vector by given degrees (errors when value over 90)

    - by Ivan
    I created a function to rotate a vector by a given number of degrees. It seems to work fine when given values in the range -90 to +90. Beyond this, the amount of rotation decreases, i.e., I think objects are rotating the same amount for 80 and 100 degrees. I think this diagram might be a clue to my problem, but I don't quite understand what it's showing. Must I use a different trig function depending on the radians value? The programming examples I've been able to find look similar to mine (not varying the trig functions). Vector2D.prototype.rotate = function(angleDegrees) { var radians = angleDegrees * (Math.PI / 180); var ca = Math.cos(radians); var sa = Math.sin(radians); var rx = this.x*ca - this.y*sa; var ry = this.x*sa + this.y*ca; this.x = rx; this.y = ry; };

    Read the article

  • When does depth testing happen?

    - by Utkarsh Sinha
    I'm working with 2D sprites - and I want to do 3D style depth testing with them. When writing a pixel shader for them, I get access to the semantic DEPTH0. Would writing to this value help? It seems it doesn't. Maybe it's done before the pixel shader step? Or is depth testing only done when drawing 3D things (I'm using SpriteBatch)? Any links/articles/topics to read/search for would be appreciated.

    Read the article

  • Collision detection via adjacent tiles - sprite too big

    - by BlackMamba
    I have managed to create a collision detection system for my tile-based jump'n'run game (written in C++/SFML), where I check on each update what values the surrounding tiles of the player contain and then I let the player move accordingly (i. e. move left when there is an obstacle on the right side). This works fine when the player sprite is not too big: Given a tile size of 5x5 pixels, my solution worked quite fine with a spritesize of 3x4 and 5x5 pixels. My problem is that I actually need the player to be quite gigantic (34x70 pixels given the same tilesize). When I try this, there seems to be an invisible, notably smaller boundingbox where the player collides with obstacles, the player also seems to shake strongly. Here some images to explain what I mean: Works: http://tinypic.com/r/207lvfr/8 Doesn't work: http://tinypic.com/r/2yuk02q/8 Another example of non-functioning: http://tinypic.com/r/kexbwl/8 (the player isn't falling, he stays there in the corner) My code for getting the surrounding tiles looks like this (I removed some parts to make it better readable): std::vector<std::map<std::string, int> > Game::getSurroundingTiles(sf::Vector2f position) { // converting the pixel coordinates to tilemap coordinates sf::Vector2u pPos(static_cast<int>(position.x/tileSize.x), static_cast<int>(position.y/tileSize.y)); std::vector<std::map<std::string, int> > surroundingTiles; for(int i = 0; i < 9; ++i) { // calculating the relative position of the surrounding tile(s) int c = i % 3; int r = static_cast<int>(i/3); // we subtract 1 to place the player in the middle of the 3x3 grid sf::Vector2u tilePos(pPos.x + (c - 1), pPos.y + (r - 1)); // this tells us what kind of block this tile is int tGid = levelMap[tilePos.y][tilePos.x]; // converts the coords from tile to world coords sf::Vector2u tileRect(tilePos.x*5, tilePos.y*5); // storing all the information std::map<std::string, int> tileDict; tileDict.insert(std::make_pair("gid", tGid)); tileDict.insert(std::make_pair("x", tileRect.x)); tileDict.insert(std::make_pair("y", tileRect.y)); // adding the stored information to our vector surroundingTiles.push_back(tileDict); } // I organise the map so that it is arranged like the following: /* * 4 | 1 | 5 * -- -- -- * 2 | / | 3 * -- -- -- * 6 | 0 | 7 * */ return surroundingTiles; } I then check in a loop through the surrounding tiles, if there is a 1 as gid (indicates obstacle) and then check for intersections with that adjacent tile. The problem I just can't overcome is that I think that I need to store the values of all the adjacent tiles and then check for them. How? And may there be a better solution? Any help is appreciated. P.S.: My implementation derives from this blog entry, I mostly just translated it from Objective-C/Cocos2d.

    Read the article

  • How can i get latency when using Game Center?

    - by Freddy
    I'm pretty new to network programming. Basically I'm using game center for making a relatively simple iPhone game using Game-center p2p. However i'm now working on a algorithm to improve the multiplayer performance. But, I need to know how long it took for a package to travel from one device to the another device (latency) for the algorithm to work good. As for now, I have solved the problem by sending a double with time interval since 1970 in the package and then I compare it with the time at the other device. However I have heard that the NSDate methods is connected to the internet, which also will cause latency so the time interval would not be perfectly correct. What is the ideal way to check for how long it take for a package to be sent?

    Read the article

  • Most efficient AABB - Ray intersection algorithm for input/output distance calculation

    - by Tobbey
    Thanks to the following thread : most efficient AABB vs Ray collision algorithms I have seen very fast algorithm for ray/AABB intersection point computation. Unfortunately, most of the recent algorithm are accelerated by omitting the "output" intersection point of the box. In my application, I would interested in getting both the the distance from source ray to input: t0 and source ray to output of bounding box: t1. I have seen for instance Eisemann designed a very fast version regarding plucker, smits, ... , but it does not compare the case when both input/output distance should be computed see: http://www.cg.cs.tu-bs.de/publications/Eisemann07FRA/ Does someone know where I can find more information on algorithm performances for the specific input/output problem ? Thank you in advance

    Read the article

  • Simulating smooth movement along a line after calculating a collision containing a restitution of zero in 2D

    - by Casey
    [for tl;dr see after listing] //...Code to determine shapes types involved in collision here... //...Rectangle-Line collision detected. if(_rbTest->GetCollisionShape()->Intersects(*_ground->GetCollisionShape())) { //Convert incoming shape to a line. a2de::Line l(*dynamic_cast<a2de::Line*>(_ground->GetCollisionShape())); //Get line's normal. a2de::Vector2D normal_vector(l.GetSlope().GetY(), -l.GetSlope().GetX()); a2de::Vector2D::Normalize(normal_vector); //Accumulate forces involved. a2de::Vector2D intermediate_forces; a2de::Vector2D normal_force = normal_vector * _rbTest->GetMass() * _world->GetGravityHandler()->GetGravityValue(); intermediate_forces += normal_force; //Calculate final velocity: See [1] double Ma = _rbTest->GetMass(); a2de::Vector2D Ua = _rbTest->GetVelocity(); double Mb = _ground->GetMass(); a2de::Vector2D Ub = _ground->GetVelocity(); double mCr = Mb * _ground->GetRestitution(); a2de::Vector2D collision_velocity( ((Ma * Ua) + (Mb * Ub) + ((mCr * Ub) - (mCr * Ua))) / (Ma + Mb)); //Calculate reflection vector: See [2] a2de::Vector2D reflect_velocity( -collision_velocity + 2 * (a2de::Vector2D::DotProduct(collision_velocity, normal_vector)) * normal_vector ); //Affect velocity to account for restitution of colliding bodies. reflect_velocity *= (_ground->GetRestitution() * _rbTest->GetRestitution()); _rbTest->SetVelocity(reflect_velocity); //THE ULTIMATE ISSUE STEMS FROM THE FOLLOWING LINE: //Move object away from collision one pixel to prevent constant collision. _rbTest->SetPosition(_rbTest->GetPosition() + normal_vector); _rbTest->ApplyImpulse(intermediate_forces); } Sources: (1) Wikipedia: Coefficient of Restitution: Speeds after impact (2) Wikipedia: Specular Reflection: Direction of reflection First, I have a system in place to account for friction (that is, a coefficient of friction) but is not used right now (in addition, it is zero, which should not affect the math anyway). I'll deal with that after I get this working. Anyway, when the restitution of either object involved in the collision is zero the object stops as required, but if movement along the same direction (again, irrespective of the friction value that isn't used) as the line is attempted the object moves as if slogging through knee deep snow. If I remove the line of code in question and the object is not push away one pixel the object barely moves at all. All because the object collides, is stopped, is pushed up, collides, is stopped...etc. OR collides, is stopped, collides, is stopped, etc... TL;DR How do I only account for a collision ONCE for restitution purposes (BONUS: but CONTINUALLY for frictional purposes, to be implemented later)

    Read the article

  • How To Scale Canvas In Android

    - by Daniel Braithwaite
    I am writing a android game using Canvas as the way to draw everything, the problem is that when i run it on different android phones the canvas dosn't change size i tried using canvas.scale() but that didn't make a i difference. The code i use for drawing is ... public void draw( Canvas c, int score ) { Obstical2[] obstmp = Queue.toArray(this.o); Coin[] cointmp = QueueC.toArray(this.c); for( int i = 0; i < obstmp.length; i++ ) { obstmp[i].draw(c); } for( int i = 0; i < cointmp.length; i++ ) { cointmp[i].draw(c); } c.drawText(String.format("%d", score ), 20, 50, textPaint); if( isWon && isStarted ) c.drawText("YOU WON", 20, 400, resPaint); else if( isLost && isStarted ) c.drawText("YOU LOST", 20, 400, resPaint); } The function above calls the draw functions for the entity's on the screen, theses function are as follows Draw Function For Obstical : public void draw( Canvas c ) { Log.i("D", "COIN"); coin.draw(c); } Draw Function For Coin : public void draw( Canvas c ) { obstical.draw(c); } How could i make the canvas re-size to it would look the same on any screen ? Cheers Daniel

    Read the article

  • Embed Unity3D and load multiple games from a single app

    - by Rafael Steil
    Is is possible to export an entire unity3d project/game as an AssetBundle and load it on iOS/Android/Windows on an app that doesn't know anything about such game beforehand? What I have in mind is something like the web plugin does - it loads a series of .unity3d files over http, and render inline in the browser window. Is it even possible to do something closer for iOS/Android? I have read a lot of docs so far, but still can't be sure: http://floored.com/blog/2013/integrating-unity3d-within-ios-native-application.html http://docs.unity3d.com/Manual/LoadingResourcesatRuntime.html http://docs.unity3d.com/Manual/AssetBundlesIntro.html The code from the post at http://forum.unity3d.com/threads/112703-Override-Unity-Data-folder-path?p=749108&viewfull=1#post749108 works for Android, but how about iOS and other platforms?

    Read the article

  • Per-pixel displacement mapping GLSL

    - by Chris
    Im trying to implement a per-pixel displacement shader in GLSL. I read through several papers and "tutorials" I found and ended up with trying to implement the approach NVIDIA used in their Cascade Demo (http://www.slideshare.net/icastano/cascades-demo-secrets) starting at Slide 82. At the moment I am completly stuck with following problem: When I am far away the displacement seems to work. But as more I move closer to my surface, the texture gets bent in x-axis and somehow it looks like there is a little bent in general in one direction. EDIT: I added a video: click I added some screen to illustrate the problem: Well I tried lots of things already and I am starting to get a bit frustrated as my ideas run out. I added my full VS and FS code: VS: #version 400 layout(location = 0) in vec3 IN_VS_Position; layout(location = 1) in vec3 IN_VS_Normal; layout(location = 2) in vec2 IN_VS_Texcoord; layout(location = 3) in vec3 IN_VS_Tangent; layout(location = 4) in vec3 IN_VS_BiTangent; uniform vec3 uLightPos; uniform vec3 uCameraDirection; uniform mat4 uViewProjection; uniform mat4 uModel; uniform mat4 uView; uniform mat3 uNormalMatrix; out vec2 IN_FS_Texcoord; out vec3 IN_FS_CameraDir_Tangent; out vec3 IN_FS_LightDir_Tangent; void main( void ) { IN_FS_Texcoord = IN_VS_Texcoord; vec4 posObject = uModel * vec4(IN_VS_Position, 1.0); vec3 normalObject = (uModel * vec4(IN_VS_Normal, 0.0)).xyz; vec3 tangentObject = (uModel * vec4(IN_VS_Tangent, 0.0)).xyz; //vec3 binormalObject = (uModel * vec4(IN_VS_BiTangent, 0.0)).xyz; vec3 binormalObject = normalize(cross(tangentObject, normalObject)); // uCameraDirection is the camera position, just bad named vec3 fvViewDirection = normalize( uCameraDirection - posObject.xyz); vec3 fvLightDirection = normalize( uLightPos.xyz - posObject.xyz ); IN_FS_CameraDir_Tangent.x = dot( tangentObject, fvViewDirection ); IN_FS_CameraDir_Tangent.y = dot( binormalObject, fvViewDirection ); IN_FS_CameraDir_Tangent.z = dot( normalObject, fvViewDirection ); IN_FS_LightDir_Tangent.x = dot( tangentObject, fvLightDirection ); IN_FS_LightDir_Tangent.y = dot( binormalObject, fvLightDirection ); IN_FS_LightDir_Tangent.z = dot( normalObject, fvLightDirection ); gl_Position = (uViewProjection*uModel) * vec4(IN_VS_Position, 1.0); } The VS just builds the TBN matrix, from incoming normal, tangent and binormal in world space. Calculates the light and eye direction in worldspace. And finally transforms the light and eye direction into tangent space. FS: #version 400 // uniforms uniform Light { vec4 fvDiffuse; vec4 fvAmbient; vec4 fvSpecular; }; uniform Material { vec4 diffuse; vec4 ambient; vec4 specular; vec4 emissive; float fSpecularPower; float shininessStrength; }; uniform sampler2D colorSampler; uniform sampler2D normalMapSampler; uniform sampler2D heightMapSampler; in vec2 IN_FS_Texcoord; in vec3 IN_FS_CameraDir_Tangent; in vec3 IN_FS_LightDir_Tangent; out vec4 color; vec2 TraceRay(in float height, in vec2 coords, in vec3 dir, in float mipmap){ vec2 NewCoords = coords; vec2 dUV = - dir.xy * height * 0.08; float SearchHeight = 1.0; float prev_hits = 0.0; float hit_h = 0.0; for(int i=0;i<10;i++){ SearchHeight -= 0.1; NewCoords += dUV; float CurrentHeight = textureLod(heightMapSampler,NewCoords.xy, mipmap).r; float first_hit = clamp((CurrentHeight - SearchHeight - prev_hits) * 499999.0,0.0,1.0); hit_h += first_hit * SearchHeight; prev_hits += first_hit; } NewCoords = coords + dUV * (1.0-hit_h) * 10.0f - dUV; vec2 Temp = NewCoords; SearchHeight = hit_h+0.1; float Start = SearchHeight; dUV *= 0.2; prev_hits = 0.0; hit_h = 0.0; for(int i=0;i<5;i++){ SearchHeight -= 0.02; NewCoords += dUV; float CurrentHeight = textureLod(heightMapSampler,NewCoords.xy, mipmap).r; float first_hit = clamp((CurrentHeight - SearchHeight - prev_hits) * 499999.0,0.0,1.0); hit_h += first_hit * SearchHeight; prev_hits += first_hit; } NewCoords = Temp + dUV * (Start - hit_h) * 50.0f; return NewCoords; } void main( void ) { vec3 fvLightDirection = normalize( IN_FS_LightDir_Tangent ); vec3 fvViewDirection = normalize( IN_FS_CameraDir_Tangent ); float mipmap = 0; vec2 NewCoord = TraceRay(0.1,IN_FS_Texcoord,fvViewDirection,mipmap); //vec2 ddx = dFdx(NewCoord); //vec2 ddy = dFdy(NewCoord); vec3 BumpMapNormal = textureLod(normalMapSampler, NewCoord.xy, mipmap).xyz; BumpMapNormal = normalize(2.0 * BumpMapNormal - vec3(1.0, 1.0, 1.0)); vec3 fvNormal = BumpMapNormal; float fNDotL = dot( fvNormal, fvLightDirection ); vec3 fvReflection = normalize( ( ( 2.0 * fvNormal ) * fNDotL ) - fvLightDirection ); float fRDotV = max( 0.0, dot( fvReflection, fvViewDirection ) ); vec4 fvBaseColor = textureLod( colorSampler, NewCoord.xy,mipmap); vec4 fvTotalAmbient = fvAmbient * fvBaseColor; vec4 fvTotalDiffuse = fvDiffuse * fNDotL * fvBaseColor; vec4 fvTotalSpecular = fvSpecular * ( pow( fRDotV, fSpecularPower ) ); color = ( fvTotalAmbient + (fvTotalDiffuse + fvTotalSpecular) ); } The FS implements the displacement technique in TraceRay method, while always using mipmap level 0. Most of the code is from NVIDIA sample and another paper I found on the web, so I guess there cannot be much wrong in here. At the end it uses the modified UV coords for getting the displaced normal from the normal map and the color from the color map. I looking forward for some ideas. Thanks in advance! Edit: Here is the code loading the heightmap: glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, mWidth, mHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, mImageData); glGenerateMipmap(GL_TEXTURE_2D); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR_MIPMAP_LINEAR); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); Maybe something wrong in here?

    Read the article

  • Using MVC with a retained mode renderer

    - by David Gouveia
    I am using a retained mode renderer similar to the display lists in Flash. In other words, I have a scene graph data structure called the Stage to which I add the graphical primitives I would like to see rendered, such as images, animations, text. For simplicity I'll refer to them as Sprites. Now I'm implementing an architecture which is becoming very similar to MVC, but I feel that that instead of having to create View classes, that the sprites already behave pretty much like Views (except for not being explicitly connected to the Model). And since the Model is only changed through the Controller, I could simply update the view together with the Model in the controller, as in the example below: Example 1 class Controller { Model model; Sprite view; void TeleportTo(Vector2 position) { model.Position = view.Position = position; } } The alternative, I think, would be to create View classes that wrap the sprites, make the model observable, and make the view react to changes on the model. This seems like a lot of extra work and boilerplate code, and I'm not seeing the benefits if I'm just going to have one view per controller. Example 2 class Controller { Model model; View view; void TeleportTo(Vector2 position) { model.Position = position; } } class View { Model model; Sprite sprite; View() { model.PropertyChanged += UpdateView; } void UpdateView() { sprite.Position = model.Position; } } So, how is MVC or more specifically, the View, usually implemented when using a retained-mode renderer? And is there any reason why I shouldn't stick with example 1?

    Read the article

  • Vertex Array Object (OpenGL)

    - by Shin
    I've just started out with OpenGL I still haven't really understood what Vertex Array Objects are and how they can be employed. If Vertex Buffer Object are used to store vertex data (such as their positions and texture coordinates) and the VAOs only contain status flags, where can they be used? What's their purpose? As far as I understood from the (very incomplete and unclear) GL Wiki, VAOs are used to set the flags/status for every vertex, following the order described in the Element Array Buffer, but the wiki was really ambiguous about it and I'm not really sure about what VAOs really do and how I could employ them.

    Read the article

  • Z-order with Alpha blending in a 3D world

    - by user41765
    I'm working on a game in a 3D world with 2D sprites only (like Don't Starve game). (OpenGL ES2 with C++) Currently, I'm ordering elements back to front before drawing them without batch (so 1 element = 1 drawcall). I would like to implement batching in my framework to decrease draw calls. Here is what I've got for the moment: Order all elements of my scene back to front. Send order list of elements to the Renderer. Renderer look in his batch manager if a batch exist for the given element with his Material. Batch didn't exist: create a new one. Batch exist for element with this Material: Add sprite to the batch. Compute big mesh with all sprite for each batch (1 material type = 1 batch). When all batches are ok, the batch manager compute draw commands for the renderer. Renderer process draw commands (bind shader, bind textures, bind buffers, draw element) Image with my problem here: Explication here But I've got some problems because objects can be behind another objects inside another batch. How can I do something like that? Thanks!

    Read the article

  • Storing game objects with generic object information

    - by Mick
    In a simple game object class, you might have something like this: public abstract class GameObject { protected String name; // other properties protected double x, y; public GameObject(String name, double x, double y) { // etc } // setters, getters } I was thinking, since a lot of game objects (ex. generic monsters) will share the same name, movement speed, attack power, etc, it would be better to have all that information shared between all monsters of the same type. So I decided to have an abstract class "ObjectData" to hold all this shared information. So whenever I create a generic monster, I would use the same pre-created "ObjectData" for it. Now the above class becomes more like this: public abstract class GameObject { protected ObjectData data; protected double x, y; public GameObject(ObjectData data, double x, double y) { // etc } // setters, getters public String getName() { return data.getName(); } } So to tailor this specifically for a Monster (could be done in a very similar way for Npcs, etc), I would add 2 classes. Monster which extends GameObject, and MonsterData which extends ObjectData. Now I'll have something like this: public class Monster extends GameObject { public Monster(MonsterData data, double x, double y) { super(data, x, y); } } This is where my design question comes in. Since MonsterData would hold data specific to a generic monster (and would vary with what say NpcData holds), what would be the best way to access this extra information in a system like this? At the moment, since the data variable is of type ObjectData, I'll have to cast data to MonsterData whenever I use it inside the Monster class. One solution I thought of is this, but this might be bad practice: public class Monster extends GameObject { private MonsterData data; // <- this part here public Monster(MonsterData data, double x, double y) { super(data, x, y); this.data = data; // <- this part here } } I've read that for one I should generically avoid overwriting the underlying classes variables. What do you guys think of this solution? Is it bad practice? Do you have any better solutions? Is the design in general bad? How should I redesign this if it is? Thanks in advanced for any replies, and sorry about the long question. Hopefully it all makes sense!

    Read the article

  • How do I implement smooth movement in a Box2D platform game?

    - by Romeo
    I have implemented a character in JBox2D which moves with the help of a wheel rotating at the bottom of it. The movement is the best result I've had 'till now but it's a little glitchy when the character stands on the edge. So I am thinking should I use five smaller wheels instead of a big wheel. The wheel/wheels will not be visible in the finished product, now they are drawn for debugging. Here is a video. Is there a better way to do this using JBox2D?

    Read the article

  • Interacting with scene from controller/app delegate cocos2d

    - by cjroebuck
    I'm attempting to make my first cocos2d (for iphone) multiplayer game and having difficulty understanding how to interact with a scene once it is running. The game is a simple turn-based one and so I have a GameController class which co-ordinates the rounds. I also have a GameScene class which is the actual scene that is displayed during a round of the game. The basic interaction I need is for the GameController to be able to pass messages to the GameScene class.. such as StartRound/StopRound etc. The thing that complicates this is that I am loading the GameScene with a LoadingScene class which simply initialises the scene and replaces the current scene with this one, so there is no reference from GameController to GameScene, so passing messages is quite tricky. Does anyone have any ways to get around this, ideally I would still like to use a Loading class as it smooths out the memory hit when replacing scenes.

    Read the article

  • How to draw texture to screen in Unity?

    - by user1306322
    I'm looking for a way to draw textures to screen in Unity in a similar fashion to XNA's SpriteBatch.Draw method. Ideally, I'd like to write a few helper methods to make all my XNA code work in Unity. This is the first issue I've faced on this seemingly long journey. I guess I could just use quads, but I'm not so sure it's the least expensive way performance-wise. I could do that stuff in XNA anyway, but they made SpriteBatch not without a reason, I believe.

    Read the article

  • Seek Steering Behavior with Target Direction for Group of Fighters

    - by SebastianStehle
    I am implementing steering algorithms with group management for spaceships (fighters). I select a leader and assign the target positions for the other spaceships based on the target position of the leader and an offset. This works well. But when my spaceships arrive they all have a different direction. I want them to keep to look in the same direction (target - start). I also want to combine this behavior with a minimum turning radius that is based on the speed. The only idea I have is to calculate a path for each spaceship with an point before the target position, so the ships have some time left to turn into the right position. But I dont know if this is a good idea. I guess there will be a lot of rare cases where this can cause a problem. So the question is, if anybody knows how to solve this problem and has some (simple code) or pseudocode for me or at least some good explanation.

    Read the article

  • creating a pre-menu level select screen

    - by Ephiras
    Hi I am working on creating a tower Defence java applet game and have come to a road block about implementing a title screen that i can select the level and difficulty of the rest of the game. my title screen class is called Menu. from this menu class i need to pass in many different variables into my Main class. i have used different classes before and know how to run them and such. but if both classes extend applet and each has its individual graphics method how can i run things from Main even though it was created in Menu. what i essentially want to do is run the Menu class withits action listeners and graphics until a Difficulty button has been selected, run the main class (which 100% works without having to have the Menu class) and pretty much terminate Menu so that i cannot go back to it, do not see its buttons or graphics menus. can i run one applet annd when i choose a button close that one and launch the other one? IF you would like to download the full project you can find it here, i had to comment out all the code that wasn't working my Menu class import java.awt.*; import java.awt.event.*; import java.applet.*; public class Menu extends Applet implements ActionListener{ Button bEasy,bMed,bHard; Main m; public void init(){ bEasy= new Button("Easy"); bEasy.setBounds(140,200,100,50); add(bEasy); bMed = new Button("Medium");bMed.setBounds(280,200,100,50); add(bMed); bHard= new Button("Hard");bHard.setBounds(420,200,100,50); add(bHard); setLayout(null); } public void actionPerformed(ActionEvent e){ Main m = new Main(20,10,3000,mapMed);//break; switch (e.getSource()){ case bEasy: Main m = new Main(6000,20,"levels/levelEasy.png");break;//enimies tower money world case bMed: Main m = new Main(4000,15,"levels/levelMed.png");break; case bHard: Main m = new Main(2000,10,"levels/levelEasy.png");break; default: break; } } public void paint(){ //m.draw(g) } } and here is my main class initialising code. import java.awt.*; import java.awt.event.*; import java.applet.*; import java.io.IOException; public class Main extends Applet implements Runnable, MouseListener, MouseMotionListener, ActionListener{ Button startButton, UpgRange, UpgDamage; //set up the buttons Color roadCol,startCol,finCol,selGrass,selRoad; //set up the colors Enemy e[][]; Tower t[]; Image towerpic,backpic,roadpic,levelPic; private Image i; private Graphics doubleG; //here is the world 0=grass 1=road 2=start 3=end int world[][],eStartX,eStartY; boolean drawMouse,gameEnd; static boolean start=false; static int gridLength=15; static int round=0; int Mx,My,timer=1500; static int sqrSize=31; int towers=0,towerSelected=-10; static int castleHealth=2000; String levelPath; //choose the level Easy Med or Hard int maxEnemy[] = {5,7,12,20,30,15,50,30,40,60};//number of enimies per round int maxTowers=15;//maximum number of towers allowed static int money =2000,damPrice=600,ranPrice=350,towerPrice=700; //money = the intial ammount of money you start of with //damPrice is the price to increase the damage of a tower //ranPrice is the price to increase the range of a tower public void main(int cH,int mT,int mo,int dP,int rP,int tP,String path,int[] mE)//constructor 1 castleHealth=cH; maxTowers=mT; money=mo; damPrice=dP; ranPrice=rP; towerPrice=tP; String levelPath=path; maxEnemy = mE; buildLevel(); } public void main(int cH,int mT,String path)//basic constructor castleHealth=cH; maxTowers=mT; String levelPath=path; maxEnemy = mE; buildLevel(); } public void init(){ setSize(sqrSize*15+200,sqrSize*15);//set the size of the screen roadCol = new Color(255,216,0);//set the colors for the different objects startCol = new Color(0,38,255); finCol = new Color(255,0,0); selRoad = new Color(242,204,155);//selColor is the color of something when your mouse hovers over it selGrass = new Color(0,190,0); roadpic = getImage(getDocumentBase(),"images/road.jpg"); towerpic = getImage(getDocumentBase(),"images/tower.png"); backpic = getImage(getDocumentBase(),"images/grass.jpg"); levelPic = getImage(getDocumentBase(),"images/level.jpg"); e= new Enemy[maxEnemy.length][];//activates all of the enimies for (int r=0;r<e.length;r++) e[r] = new Enemy[maxEnemy[r]]; t= new Tower[maxTowers]; for (int i=0;i<t.length;i++) t[i]= new Tower();//activates all the towers for (int i=0;i<e.length; i++)//sets all of the enimies starting co ordinates for (int j=0;j<e[i].length;j++) e[i][j] = new Enemy(eStartX,eStartY,world); initButtons();//initialise all the buttons addMouseMotionListener(this); addMouseListener(this); }

    Read the article

  • What's the most efficient way to find barycentric coordinates?

    - by bobobobo
    In my profiler, finding barycentric coordinates is apparently somewhat of a bottleneck. I am looking to make it more efficient. It follows the method in shirley, where you compute the area of the triangles formed by embedding the point P inside the triangle. Code: Vector Triangle::getBarycentricCoordinatesAt( const Vector & P ) const { Vector bary ; // The area of a triangle is real areaABC = DOT( normal, CROSS( (b - a), (c - a) ) ) ; real areaPBC = DOT( normal, CROSS( (b - P), (c - P) ) ) ; real areaPCA = DOT( normal, CROSS( (c - P), (a - P) ) ) ; bary.x = areaPBC / areaABC ; // alpha bary.y = areaPCA / areaABC ; // beta bary.z = 1.0f - bary.x - bary.y ; // gamma return bary ; } This method works, but I'm looking for a more efficient one!

    Read the article

  • JPEG images not loading on PlayBook (Marmalade + iwgame)

    - by Vexille
    I'm using iwgame on a test project and I was trying to render different resolutions of JPG and PNG images. Everything works fine on the Marmalade Simulator, however once I deploy the game to our PlayBook and run it, only the PNG images are shown. I have declared the images in the MKB file and on a XML file iwgame's using to load the images. I've checked the deployments folder and all images are present in the intermediatefiles/native folder. We're currently using a BlackBerry only license, so we can only test this on the PlayBook, but we do intend to get a Community license and deploy to iOS and Android devices eventually (I'm not sure if this is a problem exclusive to the PlayBook). I really don't know if this is a Marmalade or a iwgame issue. I have a different test project without iwgame and it simply won't run with jpg images (I get the error: 'Could not find handler for extension "jpg"'). While searching for a sollution, I've seen people talking about using libjpg, but I've also found that Marmalade supposedly has integrated native jpeg support (and because of that iwgame has abandoned their jpeg loading support since v0.340), so I don't know what to think. I'm currently using the most recent versions of both Marmalade and iwgame, I believe: Marmalade 6.1.2 and iwgame 0.400. Also, please let me know if there's an easier or better way to do this, such as linking libjpg or something (I'm not exactly sure how to do this). I really would appreciate some help with this, there's a huge difference in size for the images we're planning to use, from a ~500kb jpg file to a ~3.5mb png file. Thanks, guys.

    Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >