kind - Page 494 - Developer IT

Image/"most resembling pixel" search optimization?

- by SigTerm

The situation: Let's say I have an image A, say, 512x512 pixels, and image B, 5x5 or 7x7 pixels. Both images are 24bit rgb, and B have 1bit alpha mask (so each pixel is either completely transparent or completely solid). I need to find within image A a pixel which (with its' neighbors) most closely resembles image B, OR the pixel that probably most closely resembles image B. Resemblance is calculated as "distance" which is sum of "distances" between non-transparent B's pixels and A's pixels divided by number of non-transparent B's pixels. Here is a sample SDL code for explanation: struct Pixel{ unsigned char b, g, r, a; }; void fillPixel(int x, int y, SDL_Surface* dst, SDL_Surface* src, int dstMaskX, int dstMaskY){ Pixel& dstPix = *((Pixel*)((char*)(dst->pixels) + sizeof(Pixel)*x + dst->pitch*y)); int xMin = x + texWidth - searchWidth; int xMax = xMin + searchWidth*2; int yMin = y + texHeight - searchHeight; int yMax = yMin + searchHeight*2; int numFilled = 0; for (int curY = yMin; curY < yMax; curY++) for (int curX = xMin; curX < xMax; curX++){ Pixel& cur = *((Pixel*)((char*)(dst->pixels) + sizeof(Pixel)*(curX & texMaskX) + dst->pitch*(curY & texMaskY))); if (cur.a != 0) numFilled++; } if (numFilled == 0){ int srcX = rand() % src->w; int srcY = rand() % src->h; dstPix = *((Pixel*)((char*)(src->pixels) + sizeof(Pixel)*srcX + src->pitch*srcY)); dstPix.a = 0xFF; return; } int storedSrcX = rand() % src->w; int storedSrcY = rand() % src->h; float lastDifference = 3.40282347e+37F; //unsigned char mask = for (int srcY = searchHeight; srcY < (src->h - searchHeight); srcY++) for (int srcX = searchWidth; srcX < (src->w - searchWidth); srcX++){ float curDifference = 0; int numPixels = 0; for (int tmpY = -searchHeight; tmpY < searchHeight; tmpY++) for(int tmpX = -searchWidth; tmpX < searchWidth; tmpX++){ Pixel& tmpSrc = *((Pixel*)((char*)(src->pixels) + sizeof(Pixel)*(srcX+tmpX) + src->pitch*(srcY+tmpY))); Pixel& tmpDst = *((Pixel*)((char*)(dst->pixels) + sizeof(Pixel)*((x + dst->w + tmpX) & dstMaskX) + dst->pitch*((y + dst->h + tmpY) & dstMaskY))); if (tmpDst.a){ numPixels++; int dr = tmpSrc.r - tmpDst.r; int dg = tmpSrc.g - tmpDst.g; int db = tmpSrc.g - tmpDst.g; curDifference += dr*dr + dg*dg + db*db; } } if (numPixels) curDifference /= (float)numPixels; if (curDifference < lastDifference){ lastDifference = curDifference; storedSrcX = srcX; storedSrcY = srcY; } } dstPix = *((Pixel*)((char*)(src->pixels) + sizeof(Pixel)*storedSrcX + src->pitch*storedSrcY)); dstPix.a = 0xFF; } This thing is supposed to be used for texture generation. Now, the question: The easiest way to do this is brute force search (which is used in example routine). But it is slow - even using GPU acceleration and dual core cpu won't make it much faster. It looks like I can't use modified binary search because of B's mask. So, how can I find desired pixel faster? Additional Info: It is allowed to use 2 cores, GPU acceleration, CUDA, and 1.5..2 gigabytes of RAM for the task. I would prefer to avoid some kind of lengthy preprocessing phase that will take 30 minutes to finish. Ideas?

Read the article

Javascript: selfmade methods not working correctly

- by hdr

Hi everyone, I tried to figure this out for some days now, I tried to use my own object to sort of replace the global object to reduce problems with other scripts (userscripts, chrome extensions... that kind of stuff). However I can't get things to work for some reason. I tried some debugging with JSLint, the developer tools included in Google Chrome, Firebug and the integrated schript debugger in IE8 but there is no error that explains why it doesn't work at all in any browser I tried. I tried IE 8, Google Chrome 10.0.612.3 dev, Firefox 3.6.13, Safari 5.0.3 and Opera 11. So... here is the code: HTML: <!DOCTYPE HTML> <html manifest="c.manifest"> <head> <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1"> <meta charset="utf-8">   <script src="js/data.js"></script> </head> <body> <div id="controls"> <button onclick="MYOBJECTis.next()">Next</button> </div> <div id="textfield"></div> <canvas id="game"></canvas> </body> </html> Javascript: var that = window, it = document, k = Math.floor; var MYOBJECTis = { aresizer: function(){ // This method looks like it doesn't work. // It should automatically resize all the div elements and the body. // JSLint: no error (execpt for "'window' is not defined." which is normal since // JSLint does nor recognize references to the global object like "window" or "self" // even if you assume a browser) // Firebug: no error // Chrome dev tools: no error // IE8: that.documentElement.clientWidth is null or not an object "use strict"; var a = that.innerWidth || that.documentElement.clientWidth, d = that.innerHeight || that.documentElement.clientHeight; (function() { for(var b = 0, c = it.getElementsByTagName("div");b < c.length;b++) { c.style.width = k(c.offsetWidth) / 100 * k(a); c.style.height = k(c.offsetHight) / 100 * k(d); } }()); (function() { var b = it.getElementsByTagName("body"); b.width = a; b.height = d; }()); }, next: function(){ // This method looks like it doesn't work. // It should change the text inside a div element // JSLint: no error (execpt for "'window' is not defined.") // Firebug: no error // Chrome dev tools: no error // IE8: no error (execpt for being painfully slow) "use strict"; var b = it.getElementById("textfield"), a = [], c; switch(c !== typeof Number){ case true: a[1] = ["HI"]; c = 0; break; case false: return Error; default: b.innerHtml = a[c]; c+=1; } } }; // auto events (function(){ "use strict"; that.onresize = MYOBJECTis.aresizer(); }()); If anyone can help me out with this I would very much appreciate it. EDIT: To answer the question what's not working I can just say that no method I showed here is working at all and I don't know the cause of the problem. I also tried to clean up some of the code that has most likely nothing to do with it. Additional information is in the comments inside the code.

Read the article

Does my basic PHP Socket Server need optimization?

- by Tom

Like many people, I can do a lot of things with PHP. One problem I do face constantly is that other people can do it much cleaner, much more organized and much more structured. This also results in much faster execution times and much less bugs. I just finished writing a basic PHP Socket Server (the real core), and am asking you if you can tell me what I should do different before I start expanding the core. I'm not asking about improvements such as encrypted data, authentication or multi-threading. I'm more wondering about questions like "should I maybe do it in a more object oriented way (using PHP5)?", or "is the general structure of the way the script works good, or should some things be done different?". Basically, "is this how the core of a socket server should work?" In fact, I think that if I just show you the code here many of you will immediately see room for improvements. Please be so kind to tell me. Thanks! #!/usr/bin/php -q <? // config $timelimit = 180; // amount of seconds the server should run for, 0 = run indefintely $address = $_SERVER['SERVER_ADDR']; // the server's external IP $port = 9000; // the port to listen on $backlog = SOMAXCONN; // the maximum of backlog incoming connections that will be queued for processing // configure custom PHP settings error_reporting(1); // report all errors ini_set('display_errors', 1); // display all errors set_time_limit($timelimit); // timeout after x seconds ob_implicit_flush(); // results in a flush operation after every output call //create master IPv4 based TCP socket if (!($master = socket_create(AF_INET, SOCK_STREAM, SOL_TCP))) die("Could not create master socket, error: ".socket_strerror(socket_last_error())); // set socket options (local addresses can be reused) if (!socket_set_option($master, SOL_SOCKET, SO_REUSEADDR, 1)) die("Could not set socket options, error: ".socket_strerror(socket_last_error())); // bind to socket server if (!socket_bind($master, $address, $port)) die("Could not bind to socket server, error: ".socket_strerror(socket_last_error())); // start listening if (!socket_listen($master, $backlog)) die("Could not start listening to socket, error: ".socket_strerror(socket_last_error())); //display startup information echo "[".date('Y-m-d H:i:s')."] SERVER CREATED (MAXCONN: ".SOMAXCONN.").\n"; //max connections is a kernel variable and can be adjusted with sysctl echo "[".date('Y-m-d H:i:s')."] Listening on ".$address.":".$port.".\n"; $time = time(); //set startup timestamp // init read sockets array $read_sockets = array($master); // continuously handle incoming socket messages, or close if time limit has been reached while ((!$timelimit) or (time() - $time < $timelimit)) { $changed_sockets = $read_sockets; socket_select($changed_sockets, $write = null, $except = null, null); foreach($changed_sockets as $socket) { if ($socket == $master) { if (($client = socket_accept($master)) < 0) { echo "[".date('Y-m-d H:i:s')."] Socket_accept() failed, error: ".socket_strerror(socket_last_error())."\n"; continue; } else { array_push($read_sockets, $client); echo "[".date('Y-m-d H:i:s')."] Client #".count($read_sockets)." connected (connections: ".count($read_sockets)."/".SOMAXCONN.")\n"; } } else { $data = @socket_read($socket, 1024, PHP_NORMAL_READ); //read a maximum of 1024 bytes until a new line has been sent if ($data === false) { //the client disconnected $index = array_search($socket, $read_sockets); unset($read_sockets[$index]); socket_close($socket); echo "[".date('Y-m-d H:i:s')."] Client #".($index-1)." disconnected (connections: ".count($read_sockets)."/".SOMAXCONN.")\n"; } else { if ($data = trim($data)) { //remove whitespace and continue only if the message is not empty switch ($data) { case "exit": //close connection when exit command is given $index = array_search($socket, $read_sockets); unset($read_sockets[$index]); socket_close($socket); echo "[".date('Y-m-d H:i:s')."] Client #".($index-1)." disconnected (connections: ".count($read_sockets)."/".SOMAXCONN.")\n"; break; default: //for experimental purposes, write the given data back socket_write($socket, "\n you wrote: ".$data); } } } } } } socket_close($master); //close the socket echo "[".date('Y-m-d H:i:s')."] SERVER CLOSED.\n"; ?>

Read the article

Windows Phone 7: Making ListBox items change dynamically

- by Chad La Guardia

I am working on creating a Windows Phone app that will play a series of sound clips selected from a list. I am using the MVVM (Model View View-Model) Design pattern and have designed a model for my data, along with a view model for my page. Here is what the XAML for the ListBox looks like: <ListBox x:Name="MediaListBox" Margin="0,0,-12,0" ItemsSource="{Binding Media}" SelectionChanged="MediaListBox_SelectionChanged" HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch"> <ListBox.ItemTemplate > <DataTemplate> <StackPanel Margin="0,0,0,17" Width="432" Orientation="Horizontal"> <Image Source="../Media/Images/play.png" /> <StackPanel > <TextBlock Text="{Binding Title}" TextWrapping="Wrap" Style="{StaticResource PhoneTextExtraLargeStyle}"/> <TextBlock Text="{Binding ShortDescription}" TextWrapping="Wrap" Margin="12,-6,12,0" Visibility="{Binding ShortDescriptionVisibility}" Style="{StaticResource PhoneTextSubtleStyle}"/> <TextBlock Text="{Binding LongDescription}" TextWrapping="Wrap" Visibility="{Binding LongDescriptionVisibility}" /> <StackPanel> <Slider HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch" Visibility="{Binding LongDescriptionVisibility}" ValueChanged="Slider_ValueChanged" LargeChange="0.25" SmallChange="0.05" /> </StackPanel> </StackPanel> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> My question is this: I want to be able to expand and collapse part of the items in the ListBox. As you can see, I have a binding for the visibility. That binding is coming from the MediaModel. However, when I change this property in the ObservableCollection, the page is not updated to reflect this. The ViewModel for this page looks like this: public class ListenPageViewModel : INotifyPropertyChanged { public ListenPageViewModel() { this.Media = new ObservableCollection<MediaModel>; } /// <summary> /// A collection for MediaModel objects. /// </summary> public ObservableCollection<MediaModel> Media { get; private set; } public bool IsDataLoaded { get; private set; } /// <summary> /// Creates and adds the media to their respective collections. /// </summary> public void LoadData() { this.Media.Clear(); this.Media.Add(new MediaModel() { Title = "Media 1", ShortDescription = "Short here.", LongDescription = "Long here.", MediaSource = "/Media/test.mp3", LongDescriptionVisibility = Visibility.Collapsed, ShortDescriptionVisibility = Visibility.Visible }); this.Media.Add(new MediaModel() { Title = "Media 2", ShortDescription = "Short here.", LongDescription = "Long here.", MediaSource = "/Media/test2.mp3", LongDescriptionVisibility = Visibility.Collapsed, ShortDescriptionVisibility = Visibility.Visible }); this.IsDataLoaded = true; } public event PropertyChangedEventHandler PropertyChanged; private void NotifyPropertyChanged(String propertyName) { PropertyChangedEventHandler handler = PropertyChanged; if (null != handler) { handler(this, new PropertyChangedEventArgs(propertyName)); } } } The bindings work correctly and I am seeing the data displayed; however, when I change the properties, the list does not update. I believe that this may be because when I change things inside the observable collection, the property changed event is not firing. What can I do to remedy this? I have poked around for some info on this, but many of the tutorials don't cover this kind of behavior. Any help would be greatly appreciated! Thanks Edit: As requested, I have added the MediaModel code: public class MediaModel : INotifyPropertyChanged { public string Title { get; set; } public string ShortDescription { get; set; } public string LongDescription { get; set; } public string MediaSource { get; set; } public Visibility LongDescriptionVisibility { get; set; } public Visibility ShortDescriptionVisibility { get; set; } public MediaModel() { } public MediaModel(string Title, string ShortDescription, string LongDescription, string MediaSource, Visibility LongDescriptionVisibility, Visibility ShortDescriptionVisibility) { this.Title = Title; this.ShortDescription = ShortDescription; this.LongDescription = LongDescription; this.MediaSource = MediaSource; this.LongDescriptionVisibility = LongDescriptionVisibility; this.ShortDescriptionVisibility = ShortDescriptionVisibility; } public event PropertyChangedEventHandler PropertyChanged; private void NotifyPropertyChanged(String propertyName) { PropertyChangedEventHandler handler = PropertyChanged; if (null != handler) { handler(this, new PropertyChangedEventArgs(propertyName)); } } } Originally, I did not have this class implement the INotifyPropertyChanged. I did this to see if it would solve the problem. I was hoping this could just be a data object.

Read the article

Memory error, access violation.

- by Ordo

Hello! I'm learning C on my own and as a exercise i have written a program but it does not work. The program is splitted into 3 parts. A header file, a main file for executing the program a file to define the functions. I'm not using all the functions yet but that shouldn't be the problem. Here is my header file, nothing special in it. #ifndef EMPLOYEE_H #define EMPLOYEE_H struct Employee { char first[21]; char last[21]; char title[21]; int salary; }; struct Employee* createEmployee(char*, char*, char*, int); // Creates a struct Employee object on the heap. char* getfirstname (struct Employee*); char* getlastname (struct Employee*); char* gettitle (struct Employee*); int getsalary (struct Employee*); void setfirstname (struct Employee*, char*); void setlastname (struct Employee*, char*); void settitle (struct Employee*, char*); void setsalary (struct Employee*, int); void printEmployee(struct Employee*); #endif In this file i define the functions and how they work: #include "7.1.h" #include <stdio.h> #include <stdlib.h> #include <string.h> struct Employee* createEmployee(char* first, char* last, char* title, int salary) // Creates a struct Employee object on the heap. { struct Employee* p = (struct Employee*) malloc(sizeof(struct Employee)); if (p != NULL) { strcpy(p->first, first); strcpy(p->last, last); strcpy(p->title, title); p->salary, salary; } return p; } char* getfirstname (struct Employee* p) { if (p != NULL) return p ? p->first : ""; } char* getlastname (struct Employee* p) { if (p != NULL) return p ? p->last : ""; } char* gettitle (struct Employee* p) { if (p != NULL) return p ? p->title : ""; } int getsalary (struct Employee* p) { if (p != NULL) return p ? p->salary : 0; } void setfirstname (struct Employee* p, char* first) { if (p != NULL) strcpy(p->first, first); } void setlastname (struct Employee* p, char* last) { if (p != NULL) strcpy(p->last, last); } void settitle (struct Employee* p, char* title) { if (p != NULL) strcpy(p->title, title); } void setsalary (struct Employee* p, char* salary) { if (p != NULL) p->salary, salary; } void printEmployee(struct Employee* p) { if (p != NULL) { printf("%s, %s, %s, %d", p->first, p->last, p->salary, p->salary ); } } And the last file is used to executed the program/functions: #include "7.1.h" #include <stdio.h> #include <stdlib.h> int main () { char decision; struct Employee emp; struct Employee* emps[3]; for ( int i = 0; i < 1; i ++) { printf("Please type in the emplooyes data.\nFirstname:"); scanf("%s", emp.first); printf("Lastname:"); scanf("%s", emp.last); printf("Title:"); scanf("%s", emp.title); printf("Salary:"); scanf("%d", &emp.salary); emps[i] = createEmployee(emp.first, emp.last, emp.title, emp.salary); } printf("Do you want to print out your information? (Y/N):"); scanf("%c", &decision); if (decision == 'y' || decision == 'Y') { printEmployee(emps[1]); } } I don't know what the problem is. I 'm always getting the following error message after typing in first, last, title and salary for the first time. The error is written in german. It means: Unhandled exception at 0x102de42e (msvcr100d.dll) in 7.1.exe: 0xC0000005: Access violation when writing to 0xCCCCCCCC position. I could fix the first problem with the hints given below. Now when i want to print out the employee data using the function:printEmployee(emps[1]);, I get the same kind of error with access violation.

Read the article

strange behavior while including a class in php

- by user1864539

I'm experiencing a strange behavior with PHP. Basically I want to require a class within a PHP script. I know it is straight forward and I did it before but when I do so, it change the behavior of my jquery (1.8.3) ajax response. I'm running a wamp setup and my PHP version is 5.4.6. Here is a sample as for my index.html head (omitting the jquery js include) <script> $(document).ready(function(){ $('#submit').click(function(){ var action = $('#form').attr('action'); var form_data = { fname: $('#fname').val(), lname: $('#lname').val(), phone: $('#phone').val(), email: $('#email').val(), is_ajax: 1 }; $.ajax({ type: $('#form').attr('method'), url: action, data: form_data, success: function(response){ switch(response){ case 'ok': var msg = 'data saved'; break; case 'ko': var msg = 'Oops something wrong happen'; break; default: var msg = 'misc:<br/>'+response; break; } $('#message').html(msg); } }); return false; }); }); </script> body <div id="message"></div> <form id="form" action="handler.php" method="post"> <p> <input type="text" name="fname" id="fname" placeholder="fname"> <input type="text" name="lname" id="lname" placeholder="lname"> </p> <p> <input type="text" name="phone" id="phone" placeholder="phone"> <input type="text" name="email" id="email" placeholder="email"> </p> <input type="submit" name="submit" value="submit" id="submit"> </form> And as for the handler.php file: <?php require('class/Container.php'); $filename = 'xml/memory.xml'; $is_ajax = $_REQUEST['is_ajax']; if(isset($is_ajax) && $is_ajax){ $fname = $_REQUEST['fname']; $lname = $_REQUEST['lname']; $phone = $_REQUEST['phone']; $email = $_REQUEST['email']; $obj = new Container; $obj->insertData('fname',$fname); $obj->insertData('lname',$lname); $obj->insertData('phone',$phone); $obj->insertData('email',$email); $tmp = $obj->give(); $result = $tmp['_obj']; /* Push data inside array */ $array = array(); foreach($result as $key => $value){ array_push($array,$key,$value); } $xml = simplexml_load_file($filename); // check if there is any data in if(count($xml->elements->data) == 0){ // if not, create the structure $xml->elements->addChild('data',''); } // proceed now that we do have the structure if(count($xml->elements->data) == 1){ foreach($result as $key => $value){ $xml->elements->data->addChild($key,$value); } $xml->saveXML($filename); echo 'ok'; }else{ echo 'ko'; } } ? The Container class: <?php class Container{ private $_obj; public function __construct(){ $this->_obj = array(); } public function addData($data = array()){ if(!empty($data)){ $oldData = $this->_obj; $data = array_merge($oldData,$data); $this->_obj = $data; } } public function removeData($key){ if(!empty($key)){ $oldData = $this->_obj; unset($oldData[$key]); $this->_obj = $oldData; } } public function outputData(){ return $this->_obj; } public function give(){ return get_object_vars($this); } public function insertData($key,$value){ $this->_obj[$key] = $value; } } ? The strange thing is that my result always fall under the default switch statement and the ajax response fit both present statement. I noticed then if I just paste the Container class on the top of the handler.php file, everything works properly but it kind of defeat what I try to achieve. I tried different way to include the Container class but it seem to be than the issue is specific to this current scenario. I'm still learning PHP and my guess is that I'm missing something really basic. I also search on stackoverflow regarding the issue I'm experiencing as well as PHP.net, without success. Regards,

Read the article

Pass a variable from javascript to php in the same session OnClickFunction

- by MickyScion

I was seeing through stackoverflow the solutions for this kind of problems but any of them are executing the code of javascript in the same session...please i want some help with this...i have this in my session <script> function show_alert() { var ProdAntes = document.getElementById("productoseleccionado").value; var CantAntes = document.getElementById("cantidadantes").value; var PrecAntes = document.getElementById("precioantes").value; var FecAntes = document.getElementById("fechaantes").value; var ProdAhora = document.getElementById("SoyaProductorProduccionProducto").value; var CantAhora = document.getElementById("SoyaProductorProduccionCantidadtm").value; var PrecAhora = document.getElementById("SoyaProductorProduccionPreciodolar").value; var FecAhora = document.getElementById("select_date").value; } </script> and in my html stuff i have this <?php echo $this->Form->create('SoyaProductorProduccion');?> <fieldset> <?php echo $this->Form->hidden('id', array('value' => $this->data['SoyaProductorProduccion']['id'])); echo $this->Form->input('operacion', array('type' => 'hidden', 'value'=>'Produccion')); //-------------------------------------------------------------- $productoseleccionado = $this->data['SoyaProductorProduccion']['producto']; echo $this->Form->input('productoseleccionado', array('type' => 'hidden','style'=>'width:500px; height:30px;','id' => 'productoseleccionado' , 'value' => $productoseleccionado)); echo $this->Form->input('producto', array( 'options' => array( $productoseleccionado => $productoseleccionado, 'Torta solvente de soya' => 'Torta solvente de soya', 'Torta solvente de girasol' => 'Torta solvente de girasol', 'Harina integral de soya' => 'Harina integral de soya', 'Harina de girasol' => 'Harina de girasol', 'Cascarilla de soya' => 'Cascarilla de soya', 'Cascarilla de girasol' => 'Cascarilla de girasol', 'Aceite de soya refinado' => 'Aceite de soya refinado', 'Aceite de soya crudo' => 'Aceite de soya crudo', 'Aceite de girasol refinado' => 'Aceite de girasol refinado', 'Aceite de girasol crudo' => 'Aceite de girasol crudo', ),'label'=>'Tipo de Producto' )); foreach ($soyacambiodolares as $soyacambiodolar): $dolar=$soyacambiodolar['SoyaCambioDolar']['cambio']; endforeach; echo $this->Form->input('cambio', array('type' => 'hidden','value' => $dolar)); //----------------------------------------------------------------------------- $cantidadantes = $this->data['SoyaProductorProduccion']['cantidadtm']; echo $this->Form->input('cantidadantes', array('type' => 'hidden','style'=>'width:500px; height:30px;', 'value' => $cantidadantes,'id' => 'cantidadantes')); echo $this->Form->input('cantidadtm', array('label' => 'Cantidad en tonelada(s) métrica(s) del producto (TM)','style'=>'width:500px; height:30px;')); //----------------------------------------------------------------------------- $precioantes = $this->data['SoyaProductorProduccion']['preciodolar']; echo $this->Form->input('precioantes', array('type' => 'hidden','style'=>'width:500px; height:30px;', 'value' => $precioantes,'id' => 'precioantes')); echo $this->Form->input('preciodolar', array('label' => 'Precio en Dolares Americanos por tonelada métrica (TM / $us)','style'=>'width:500px; height:30px;')); //----------------------------------------------------------------------------- ?> <table style="width: 600px"> <tr> <td > <?php //---------------------------------------------------------------- $fechaantes = $this->data['SoyaProductorProduccion']['fecharegistro']; echo $this->Form->input('fechaantes', array('type' => 'hidden','style'=>'width:500px; height:30px;', 'value' => $fechaantes, 'id' => 'fechaantes')); //---------------------------------------------------------------- echo $this->Form->input("fecharegistro", array( 'label' => '<strong>Periodo al que corresponde la declaración</strong>', 'type' => 'text', 'style' => 'width: 110px', 'class' => 'fl tal vat w300p', 'error' => false , 'id' => 'select_date')); ?> <?php echo $this->Html->div('datepicker_img w100p fl pl460p pa', $this->Html->image('datepicker_calendar_icon.gif'),array('id' => 'datepicker_img')); ?> <?php echo $this->Html->div('datepicker fl pl460p pa', ' ' ,array('id' => 'datepicker')); ?> </td> </tr> </table> <?php echo $this->Form->submit('Modificar Existencia', array('class' => 'form-submit', 'title' => 'Presione aqui para agregar datos', 'onclick' => 'return show_alert();')); ?> </fieldset> <?php echo $this->Form->end(); ?> my function is ok but i want these: when i click the submit button i want to compare wich field had been changed, and i want to create a chain of detailed changes like "change in the field 1, change in the fiel 2.--" and so on...and this has to be saved in my database so i have to pass to a variable in my php before saving...thanks!

Read the article

Perl - Reading .txt files line-by-line and using compare function (printing non-matches only once)

- by Kurt W

I am really struggling and have spent about two full days on this banging my head against receiving the same result every time I run this perl script. I have a Perl script that connects to a vendor tool and stores data for ~26 different elements within @data. There is a foreach loop for @data that breaks the 26 elements into $e-{'element1'), $e-{'element2'), $e-{'element3'), $e-{'element4'), etc. etc. etc. I am also reading from the .txt files within a directory (line-by-line) and comparing the server names that exist within the text files with what exists in $e-{'element4'}. The Problem: Matches are working perfectly and only printing one line for each of the 26 elements when there is a match, however non-matches are producing one line for every entry within the .txt files (37 in all). So if there are 100 entries (each entry having 26 elements) stored within @data, then there are 100 x 37 entries being printed. So for every non-match in the: if ($e-{'element4'} eq '6' && $_ =~ /$e-{element7}/i) statement below, I am receiving a print out saying that there is not a match. 37 entries for the same identical 26 elements (because there are 37 total entries in all of the .txt files). The Goal: I need to print out only 1 line for each unique entry (a unique entry being $e-{element1} thru $e-{element26}). It is already printing one 1 line for matches, but it is printing out 37 entries when there is not a match. I need to treat matches and non-matches differently. Code: foreach my $e (@data) { # Open the .txt files stored within $basePath and use for comparison: opendir(DIRC, $basePath . "/") || die ("cannot open directory"); my @files=(readdir(DIRC)); my @MPG_assets = grep(/(.*?).txt/, @files); # Loop through each system name found and compare it with the data in SC for a match: foreach(@MPG_assets) { $filename = $_; open (MPGFILES, $basePath . "/" . $filename) || die "canot open the file"; while(<MPGFILES>) { if ($e->{'element4'} eq '6' && $_ =~ /$e->{'element7'}/i) { ## THIS SECTION WORKS PERFECTLY AND ONLY PRINTS MATCHES WHERE $_ ## (which contains the servernames (1 per line) in the .txt files) ## EQUALS $e->{'element7'}. print $e->{'element1'} . "\n"; print $e->{'element2'} . "\n"; print $e->{'element3'} . "\n"; print $e->{'element4'} . "\n"; print $e->{'element5'} . "\n"; # ... print $e->{'element26'} . "\n"; } else { ## **THIS SECTION DOES NOT WORK**. FOR EVERY NON-MATCH, THERE IS A ## LINE PRINTED WITH 26 IDENTICAL ELEMENTS BECAUSE ITS LOOPING THRU ## THE 37 LINES IN THE *.TXT FILES. print $e->{'element1'} . "\n"; print $e->{'element2'} . "\n"; print $e->{'element3'} . "\n"; print $e->{'element4'} . "\n"; print $e->{'element5'} . "\n"; # ... print $e->{'element26'} . "\n"; } # End of 'if ($e->{'element4'} eq..' statement } # End of while loop } # End of 'foreach(@MPG_assets)' } # End of 'foreach my $e (@data)' I think I need something to identical unique elements and define what fields make up a unique element but honestly I have tried everything I know. If you would be so kind to provide actual code fixes, that would be wonderful because I am headed to production with this script quite soon. Also. I am looking for code (ideally) that is very human-readable because I will need to document it so others can understand. Please let me know if you need additional information.

Read the article

calling a java class in a servlet

- by kawtousse

hi, in my servlet i called an instance of a class.java( a class that construct an html table) in order to create this table in my jsp. the servlet is like the following: String report=request.getParameter("selrep"); String datev=request.getParameter("datepicker"); String op=request.getParameter("operator"); String batch =request.getParameter("selbatch"); System.out.println("report kind was:"+report); System.out.println("date was:"+datev); System.out.println("operator:"+op); System.out.println("batch:"+batch); if(report.equalsIgnoreCase("Report Denied")) { DeniedReportDisplay rd = new DeniedReportDisplay(); rd.ConstruireReport(); } else if(report.equalsIgnoreCase("Report Locked")) { LockedReportDisplay rl = new LockedReportDisplay(); rl.ConstruireReport(); } request.getRequestDispatcher("EspaceValidation.jsp").forward(request, response); in my jsp i can not display this table even empty or full. note: exemple a class that construct denied Report has this structure: /*constructeur*/ public DeniedReportDisplay() {} /*Methodes*/ @SuppressWarnings("unchecked") public StringBuffer ConstruireReport() { StringBuffer retour=new StringBuffer(); int i = 0; retour.append("<table border = 1 width=900 id=sheet align=left>"); retour.append("<tr bgcolor=#0099FF>" ); retour.append("<label> Denied Report</label>"); retour.append("</tr>"); retour.append("<tr>"); String[] nomCols ={"Nom","Prenom","trackingDate","activity","projectcode","WAName","taskCode","timeSpent","PercentTaskComplete","Comment"}; //String HQL_QUERY = null; for(i=0;i< nomCols.length;i++) { retour.append(("<td bgcolor=#0066CC>")+ nomCols[i] + "</td>"); } retour.append("</tr>"); retour.append("<tr>"); try { s= HibernateUtil.currentSession(); tx=s.beginTransaction(); Query query = s.createQuery("select opcemployees.Nom,opcemployees.Prenom,dailytimesheet.TrackingDate,dailytimesheet.Activity," + "dailytimesheet.ProjectCode,dailytimesheet.WAName,dailytimesheet.TaskCode," + "dailytimesheet.TimeSpent,dailytimesheet.PercentTaskComplete from Opcemployees opcemployees,Dailytimesheet dailytimesheet " + "where opcemployees.Matricule=dailytimesheet.Matricule and dailytimesheet.Etat=3 " + "group by opcemployees.Nom,opcemployees.Prenom" ); for(Iterator it=query.iterate();it.hasNext();) { if(it.hasNext()){ Object[] row = (Object[]) it.next(); retour.append("<td>" +row [0]+ "</td>");//Nom retour.append("<td>" + row [1] + "</td>");//Prenom retour.append("<td>" + row [2] + "</td>");//trackingdate retour.append("<td>" + row [3]+ "</td>");//activity retour.append("<td>" + row [4] +"</td>");//projectcode retour.append("<td>" + row [5]+ "</td>");//waname retour.append("<td>" + row [6] + "</td>");//taskcode retour.append("<td>" + row [7] + "</td>");//timespent retour.append("<td>" + row [8] + "</td>");//perecnttaskcomplete retour.append("<td><input type=text /></td>");//case de commentaire } retour.append("</tr>"); } //terminer la table. retour.append ("</table>"); tx.commit(); } catch (HibernateException e) { retour.append ("</table><H1>ERREUR:</H1>" +e.getMessage()); e.printStackTrace(); } return retour; } thanks for help.

Read the article

How to optimize method's that track metrics in 3rd party application?

- by WulfgarPro

Hi, I have two listboxes that keep updated lists of various objects roaming in a 3rd party application. When a user selects an object from a listbox, an event handler is fired, calling a method that gathers various metrics belonging to that object from the 3rd party application for displaying in a set of textboxes. This is slow! I am not sure how to optimize this functionality to facilitate greater speeds.. private void lsbUavs_SelectedIndexChanged(object sender, EventArgs e) { if (_ourSelectedUavFromListBox != null) { UtilStkScenario.ChangeUavColourOnScenario(_ourSelectedUavFromListBox.UavName, false); } if (lsbUavs.SelectedItem != null) { Uav ourUav = UtilStkScenario.FindUavFromScenarioBasedOnName(lsbUavs.SelectedItem.ToString()); hsbThrottle.Value = (int)ourUav.ThrottleValue; UtilStkScenario.ChangeUavColourOnScenario(ourUav.UavName, true); _ourSelectedUavFromListBox = ourUav; // we don't want this thread spawning many times if (tUpdateMetricInformationInTabControl != null) { if (tUpdateMetricInformationInTabControl.IsAlive) { tUpdateMetricInformationInTabControl.Abort(); } } tUpdateMetricInformationInTabControl = new Thread(UpdateMetricInformationInTabControl); tUpdateMetricInformationInTabControl.Name = "UpdateMetricInformationInTabControlUavs"; tUpdateMetricInformationInTabControl.IsBackground = true; tUpdateMetricInformationInTabControl.Start(lsbUavs); } } delegate string GetNameOfListItem(ListBox listboxId); delegate void SetTextBoxValue(TextBox textBoxId, string valueToSet); private void UpdateMetricInformationInTabControl(object listBoxToUpdate) { ListBox theListBoxToUpdate = (ListBox)listBoxToUpdate; GetNameOfListItem dGetNameOfListItem = new GetNameOfListItem(GetNameOfSelectedListItem); SetTextBoxValue dSetTextBoxValue = new SetTextBoxValue(SetNamedTextBoxValue); try { foreach (KeyValuePair<string, IAgStkObject> entity in UtilStkScenario._totalListOfAllStkObjects) { if (entity.Key.ToString() == (string)theListBoxToUpdate.Invoke(dGetNameOfListItem, theListBoxToUpdate)) { while ((string)theListBoxToUpdate.Invoke(dGetNameOfListItem, theListBoxToUpdate) == entity.Key.ToString()) { if (theListBoxToUpdate.Name == "lsbEntities") { double[] latLonAndAltOfEntity = UtilStkScenario.FindMetricsOfStkObjectOnScenario(UtilStkScenario._stkObjectRoot.CurrentTime, entity.Value); SetEntityOrUavMetricValuesInTextBoxes(dSetTextBoxValue, "Entity", entity.Key, "", "", "", "", latLonAndAltOfEntity[4].ToString(), latLonAndAltOfEntity[3].ToString()); } else if (theListBoxToUpdate.Name == "lsbUavs") { double[] latLonAndAltOfEntity = UtilStkScenario.FindMetricsOfStkObjectOnScenario(UtilStkScenario._stkObjectRoot.CurrentTime, entity.Value); SetEntityOrUavMetricValuesInTextBoxes(dSetTextBoxValue, "UAV", entity.Key, entity.Value.ClassName.ToString(), latLonAndAltOfEntity[0].ToString(), latLonAndAltOfEntity[1].ToString(), latLonAndAltOfEntity[2].ToString(), latLonAndAltOfEntity[4].ToString(), latLonAndAltOfEntity[3].ToString()); } } } } } catch (Exception e) { // selected entity was deleted(end-of-life) in STK - remove LLA information from GUI if (theListBoxToUpdate.Name == "lsbEntities") { SetEntityOrUavMetricValuesInTextBoxes(dSetTextBoxValue, "Entity", "", "", "", "", "", "", ""); UtilLog.Log(e.Message.ToString(), e.GetType().ToString(), "UpdateMetricInformationInTabControl", UtilLog.logWriter); } else if (theListBoxToUpdate.Name == "lsbUavs") { SetEntityOrUavMetricValuesInTextBoxes(dSetTextBoxValue, "UAV", "", "", "", "", "", "", ""); UtilLog.Log(e.Message.ToString(), e.GetType().ToString(), "UpdateMetricInformationInTabControl", UtilLog.logWriter); } } } internal static double[] FindMetricsOfStkObjectOnScenario(object timeToFindMetricState, IAgStkObject stkObject) { double[] stkObjectMetrics = null; try { stkObjectMetrics = new double[5]; object latOfStkObject, lonOfStkObject; double altOfStkObject, headingOfStkObject, velocityOfStkObject; IAgProvideSpatialInfo spatial = stkObject as IAgProvideSpatialInfo; IAgVeSpatialInfo spatialInfo = spatial.GetSpatialInfo(false); IAgSpatialState spatialState = spatialInfo.GetState(timeToFindMetricState); spatialState.FixedPosition.QueryPlanetodetic(out latOfStkObject, out lonOfStkObject, out altOfStkObject); double[] stkObjectheadingAndVelocity = FindHeadingAndVelocityOfStkObjectFromScenario(stkObject.InstanceName); headingOfStkObject = stkObjectheadingAndVelocity[0]; velocityOfStkObject = stkObjectheadingAndVelocity[1]; stkObjectMetrics[0] = (double)latOfStkObject; stkObjectMetrics[1] = (double)lonOfStkObject; stkObjectMetrics[2] = altOfStkObject; stkObjectMetrics[3] = headingOfStkObject; stkObjectMetrics[4] = velocityOfStkObject; } catch (Exception e) { UtilLog.Log(e.Message.ToString(), e.GetType().ToString(), "FindMetricsOfStkObjectOnScenario", UtilLog.logWriter); } return stkObjectMetrics; } private static double[] FindHeadingAndVelocityOfStkObjectFromScenario(string stkObjectName) { double[] stkObjectHeadingAndVelocity = new double[2]; IAgStkObject stkUavObject = null; try { string typeOfObject = CheckIfStkObjectIsEntityOrUav(stkObjectName); if (typeOfObject == "UAV") { stkUavObject = _stkObjectRootToIsolateForUavs.CurrentScenario.Children[stkObjectName]; IAgDataProviderGroup group = (IAgDataProviderGroup)stkUavObject.DataProviders["Heading"]; IAgDataProvider provider = (IAgDataProvider)group.Group["Fixed"]; IAgDrResult result = ((IAgDataPrvTimeVar)provider).ExecSingle(_stkObjectRootToIsolateForUavs.CurrentTime); stkObjectHeadingAndVelocity[0] = (double)result.DataSets[1].GetValues().GetValue(0); stkObjectHeadingAndVelocity[1] = (double)result.DataSets[4].GetValues().GetValue(0); } else if (typeOfObject == "Entity") { IAgStkObject stkEntityObject = _stkObjectRootToIsolateForEntities.CurrentScenario.Children[stkObjectName]; IAgDataProviderGroup group = (IAgDataProviderGroup)stkEntityObject.DataProviders["Heading"]; IAgDataProvider provider = (IAgDataProvider)group.Group["Fixed"]; IAgDrResult result = ((IAgDataPrvTimeVar)provider).ExecSingle(_stkObjectRootToIsolateForEntities.CurrentTime); stkObjectHeadingAndVelocity[0] = (double)result.DataSets[1].GetValues().GetValue(0); stkObjectHeadingAndVelocity[1] = (double)result.DataSets[4].GetValues().GetValue(0); } } catch (Exception e) { UtilLog.Log(e.Message.ToString(), e.GetType().ToString(), "FindHeadingAndVelocityOfStkObjectFromScenario", UtilLog.logWriter); } return stkObjectHeadingAndVelocity; } Any help would be really appreciated. From my knowledge, I cant really see any issues with the C#. Maybe it has to do with the methodology I'm using.. maybe some kind of caching mechanism is required - this is not natively available. WulfgarPro

Read the article

Accessing local variable doesn't improve performance

- by NicMagnier

The short version Why is this code: var index = (Math.floor(y / scale) * img.width + Math.floor(x / scale)) * 4; More performant than this one? var index = Math.floor(ref_index) * 4; The long version This week, the author of Impact js published an article about some rendering issue: http://www.phoboslab.org/log/2012/09/drawing-pixels-is-hard In the article there was the source of a function to scale an image by accessing pixels in the canvas. I wanted to suggest some traditional ways to optimize this kind of code so that the scaling would be shorter at loading time. But after testing it my result was most of the time worst that the original function. Guessing this was the JavaScript engine that was doing some smart optimization I tried to understand a bit more what was going on so I did a bunch of test. But my results are quite confusing and I would need some help to understand what's going on. I have a test page here: http://www.mx981.com/stuff/resize_bench/test.html jsPerf: http://jsperf.com/local-variable-due-to-the-scope-lookup To start the test, click the picture and the results will appear in the console. There are three different versions: The original code: for( var y = 0; y < heightScaled; y++ ) { for( var x = 0; x < widthScaled; x++ ) { var index = (Math.floor(y / scale) * img.width + Math.floor(x / scale)) * 4; var indexScaled = (y * widthScaled + x) * 4; scaledPixels.data[ indexScaled ] = origPixels.data[ index ]; scaledPixels.data[ indexScaled+1 ] = origPixels.data[ index+1 ]; scaledPixels.data[ indexScaled+2 ] = origPixels.data[ index+2 ]; scaledPixels.data[ indexScaled+3 ] = origPixels.data[ index+3 ]; } } jsPerf: http://jsperf.com/so-accessing-local-variable-doesn-t-improve-performance One of my attempt to optimize it: var ref_index = 0; var ref_indexScaled = 0 var ref_step = 1 / scale; for( var y = 0; y < heightScaled; y++ ) { for( var x = 0; x < widthScaled; x++ ) { var index = Math.floor(ref_index) * 4; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+1 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+2 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+3 ]; ref_index+= ref_step; } } jsPerf: http://jsperf.com/so-accessing-local-variable-doesn-t-improve-performance The same optimized code but with recalculating the index variable each time (Hybrid) var ref_index = 0; var ref_indexScaled = 0 var ref_step = 1 / scale; for( var y = 0; y < heightScaled; y++ ) { for( var x = 0; x < widthScaled; x++ ) { var index = (Math.floor(y / scale) * img.width + Math.floor(x / scale)) * 4; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+1 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+2 ]; scaledPixels.data[ ref_indexScaled++ ] = origPixels.data[ index+3 ]; ref_index+= ref_step; } } jsPerf: http://jsperf.com/so-accessing-local-variable-doesn-t-improve-performance The only difference in the two last one is the calculation of the 'index' variable. And to my surprise the optimized version is slower in most browsers (except opera). Results of personal testing (not the jsPerf tests): Opera Original: 8668ms Optimized: 932ms Hybrid: 8696ms Chrome Original: 139ms Optimized: 145ms Hybrid: 136ms Safari Original: 433ms Optimized: 853ms Hybrid: 451ms Firefox Original: 343ms Optimized: 422ms Hybrid: 350ms After digging around, it seems an usual good practice is to access mainly local variable due to the scope lookup. Because The optimized version only call one local variable it should be faster that the Hybrid code which call multiple variable and object in addition to the various operation involved. So why the "optimized" version is slower? I thought that it might be because some JavaScript engine don't optimize the Optimized version because it is not hot enough but after using --trace-opt in chrome, it seems all version are properly compiled by V8. At this point I am a bit clueless and wonder if somebody would know what is going on? I did also some more test cases in this page: http://www.mx981.com/stuff/resize_bench/index.html

Read the article

ActiveMQ - "Cannot send, channel has already failed" every 2 seconds?

- by quanta

ActiveMQ 5.7.0 In the activemq.log, I'm seeing this exception every 2 seconds: 2013-11-05 13:00:52,374 | DEBUG | Transport Connection to: tcp://127.0.0.1:37501 failed: org.apache.activemq.transport.InactivityIOException: Cannot send, channel has already failed: tcp://127.0.0.1:37501 | org.apache.activemq.broker.TransportConnection.Transport | Async Exception Handler org.apache.activemq.transport.InactivityIOException: Cannot send, channel has already failed: tcp://127.0.0.1:37501 at org.apache.activemq.transport.AbstractInactivityMonitor.doOnewaySend(AbstractInactivityMonitor.java:282) at org.apache.activemq.transport.AbstractInactivityMonitor.oneway(AbstractInactivityMonitor.java:271) at org.apache.activemq.transport.TransportFilter.oneway(TransportFilter.java:85) at org.apache.activemq.transport.WireFormatNegotiator.oneway(WireFormatNegotiator.java:104) at org.apache.activemq.transport.MutexTransport.oneway(MutexTransport.java:68) at org.apache.activemq.broker.TransportConnection.dispatch(TransportConnection.java:1312) at org.apache.activemq.broker.TransportConnection.processDispatch(TransportConnection.java:838) at org.apache.activemq.broker.TransportConnection.iterate(TransportConnection.java:873) at org.apache.activemq.thread.PooledTaskRunner.runTask(PooledTaskRunner.java:129) at org.apache.activemq.thread.PooledTaskRunner$1.run(PooledTaskRunner.java:47) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) Due to this keyword InactivityIOException, the first thing comes to my mind is InactivityMonitor, but the strange thing is MaxInactivityDuration=30000: 2013-11-05 13:11:02,672 | DEBUG | Sending: WireFormatInfo { version=9, properties={MaxFrameSize=9223372036854775807, CacheSize=1024, CacheEnabled=true, SizePrefixDisabled=false, MaxInactivityDurationInitalDelay=10000, TcpNoDelayEnabled=true, MaxInactivityDuration=30000, TightEncodingEnabled=true, StackTraceEnabled=true}, magic=[A,c,t,i,v,e,M,Q]} | org.apache.activemq.transport.WireFormatNegotiator | ActiveMQ BrokerService[localhost] Task-2 Moreover, I also didn't see something like this: No message received since last read check for ... or: Channel was inactive for too (30000) long Do a netstat, I see these connections in TIME_WAIT state: tcp 0 0 127.0.0.1:38545 127.0.0.1:61616 TIME_WAIT - tcp 0 0 127.0.0.1:38544 127.0.0.1:61616 TIME_WAIT - tcp 0 0 127.0.0.1:38522 127.0.0.1:61616 TIME_WAIT - Here're the output when running tcpdump: Internet Protocol Version 4, Src: 127.0.0.1 (127.0.0.1), Dst: 127.0.0.1 (127.0.0.1) Version: 4 Header length: 20 bytes Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00: Not-ECT (Not ECN-Capable Transport)) 0000 00.. = Differentiated Services Codepoint: Default (0x00) .... ..00 = Explicit Congestion Notification: Not-ECT (Not ECN-Capable Transport) (0x00) Total Length: 296 Identification: 0x7b6a (31594) Flags: 0x02 (Don't Fragment) 0... .... = Reserved bit: Not set .1.. .... = Don't fragment: Set ..0. .... = More fragments: Not set Fragment offset: 0 Time to live: 64 Protocol: TCP (6) Header checksum: 0xc063 [correct] [Good: True] [Bad: False] Source: 127.0.0.1 (127.0.0.1) Destination: 127.0.0.1 (127.0.0.1) Transmission Control Protocol, Src Port: 61616 (61616), Dst Port: 54669 (54669), Seq: 1, Ack: 2, Len: 244 Source port: 61616 (61616) Destination port: 54669 (54669) [Stream index: 11] Sequence number: 1 (relative sequence number) [Next sequence number: 245 (relative sequence number)] Acknowledgement number: 2 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) 000. .... .... = Reserved: Not set ...0 .... .... = Nonce: Not set .... 0... .... = Congestion Window Reduced (CWR): Not set .... .0.. .... = ECN-Echo: Not set .... ..0. .... = Urgent: Not set .... ...1 .... = Acknowledgement: Set .... .... 1... = Push: Set .... .... .0.. = Reset: Not set .... .... ..0. = Syn: Not set .... .... ...0 = Fin: Not set Window size value: 256 [Calculated window size: 32768] [Window size scaling factor: 128] Checksum: 0xff1c [validation disabled] [Good Checksum: False] [Bad Checksum: False] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2304161892, TSecr 2304161891 Kind: Timestamp (8) Length: 10 Timestamp value: 2304161892 Timestamp echo reply: 2304161891 [SEQ/ACK analysis] [Bytes in flight: 244] Constrained Application Protocol, TID: 240, Length: 244 00.. .... = Version: 0 ..00 .... = Type: Confirmable (0) .... 0000 = Option Count: 0 Code: Unknown (0) Transaction ID: 240 Payload Content-Type: text/plain (default), Length: 240, offset: 4 Line-based text data: text/plain [truncated] \001ActiveMQ\000\000\000\t\001\000\000\000<DE>\000\000\000\t\000\fMaxFrameSize\006\177<FF><FF><FF><FF> <FF><FF><FF>\000\tCacheSize\005\000\000\004\000\000\fCacheEnabled\001\001\000\022SizePrefixDisabled\001\000\000 MaxInactivityDurationInitalDelay\006\ It is very likely a tcp port check. This is what I see when trying telnet from another host: 2013-11-05 16:12:41,071 | DEBUG | Transport Connection to: tcp://10.8.20.9:46775 failed: java.io.EOFException | org.apache.activemq.broker.TransportConnection.Transport | ActiveMQ Transport: tcp:///10.8.20.9:46775@61616 java.io.EOFException at java.io.DataInputStream.readInt(DataInputStream.java:375) at org.apache.activemq.openwire.OpenWireFormat.unmarshal(OpenWireFormat.java:275) at org.apache.activemq.transport.tcp.TcpTransport.readCommand(TcpTransport.java:229) at org.apache.activemq.transport.tcp.TcpTransport.doRun(TcpTransport.java:221) at org.apache.activemq.transport.tcp.TcpTransport.run(TcpTransport.java:204) at java.lang.Thread.run(Thread.java:662) 2013-11-05 16:12:41,071 | DEBUG | Transport Connection to: tcp://10.8.20.9:46775 failed: org.apache.activemq.transport.InactivityIOException: Cannot send, channel has already failed: tcp://10.8.20.9:46775 | org.apache.activemq.broker.TransportConnection.Transport | Async Exception Handler org.apache.activemq.transport.InactivityIOException: Cannot send, channel has already failed: tcp://10.8.20.9:46775 at org.apache.activemq.transport.AbstractInactivityMonitor.doOnewaySend(AbstractInactivityMonitor.java:282) at org.apache.activemq.transport.AbstractInactivityMonitor.oneway(AbstractInactivityMonitor.java:271) at org.apache.activemq.transport.TransportFilter.oneway(TransportFilter.java:85) at org.apache.activemq.transport.WireFormatNegotiator.oneway(WireFormatNegotiator.java:104) at org.apache.activemq.transport.MutexTransport.oneway(MutexTransport.java:68) at org.apache.activemq.broker.TransportConnection.dispatch(TransportConnection.java:1312) at org.apache.activemq.broker.TransportConnection.processDispatch(TransportConnection.java:838) at org.apache.activemq.broker.TransportConnection.iterate(TransportConnection.java:873) at org.apache.activemq.thread.PooledTaskRunner.runTask(PooledTaskRunner.java:129) at org.apache.activemq.thread.PooledTaskRunner$1.run(PooledTaskRunner.java:47) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) 2013-11-05 16:12:41,071 | DEBUG | Unregistering MBean org.apache.activemq:BrokerName=localhost,Type=Connection,ConnectorName=ope nwire,ViewType=address,Name=tcp_//10.8.20.9_46775 | org.apache.activemq.broker.jmx.ManagementContext | ActiveMQ Transport: tcp:/ //10.8.20.9:46775@61616 2013-11-05 16:12:41,073 | DEBUG | Stopping connection: tcp://10.8.20.9:46775 | org.apache.activemq.broker.TransportConnection | ActiveMQ BrokerService[localhost] Task-5 2013-11-05 16:12:41,073 | DEBUG | Stopping transport tcp:///10.8.20.9:46775@61616 | org.apache.activemq.transport.tcp.TcpTranspo rt | ActiveMQ BrokerService[localhost] Task-5 2013-11-05 16:12:41,073 | DEBUG | Initialized TaskRunnerFactory[ActiveMQ Task] using ExecutorService: java.util.concurrent.Threa dPoolExecutor@23cc2a28 | org.apache.activemq.thread.TaskRunnerFactory | ActiveMQ BrokerService[localhost] Task-5 2013-11-05 16:12:41,074 | DEBUG | Closed socket Socket[addr=/10.8.20.9,port=46775,localport=61616] | org.apache.activemq.transpo rt.tcp.TcpTransport | ActiveMQ Task-1 2013-11-05 16:12:41,074 | DEBUG | Forcing shutdown of ExecutorService: java.util.concurrent.ThreadPoolExecutor@23cc2a28 | org.apache.activemq.util.ThreadPoolUtils | ActiveMQ BrokerService[localhost] Task-5 2013-11-05 16:12:41,074 | DEBUG | Stopped transport: tcp://10.8.20.9:46775 | org.apache.activemq.broker.TransportConnection | ActiveMQ BrokerService[localhost] Task-5 2013-11-05 16:12:41,074 | DEBUG | Connection Stopped: tcp://10.8.20.9:46775 | org.apache.activemq.broker.TransportConnection | ActiveMQ BrokerService[localhost] Task-5 2013-11-05 16:12:41,902 | DEBUG | Sending: WireFormatInfo { version=9, properties={MaxFrameSize=9223372036854775807, CacheSize=1024, CacheEnabled=true, SizePrefixDisabled=false, MaxInactivityDurationInitalDelay=10000, TcpNoDelayEnabled=true, MaxInactivityDuration=30000, TightEncodingEnabled=true, StackTraceEnabled=true}, magic=[A,c,t,i,v,e,M,Q]} | org.apache.activemq.transport.WireFormatNegotiator | ActiveMQ BrokerService[localhost] Task-5 So the question is: how can I find out the process that is trying to connect to my ActiveMQ (from localhost) every 2 seconds?

Read the article

ASP.Net MVC 2 Auto Complete Textbox With Custom View Model Attribute & EditorTemplate

- by SeanMcAlinden

In this post I’m going to show how to create a generic, ajax driven Auto Complete text box using the new MVC 2 Templates and the jQuery UI library. The template will be automatically displayed when a property is decorated with a custom attribute within the view model. The AutoComplete text box in action will look like the following: The first thing to do is to do is visit my previous blog post to put the custom model metadata provider in place, this is necessary when using custom attributes on the view model. http://weblogs.asp.net/seanmcalinden/archive/2010/06/11/custom-asp-net-mvc-2-modelmetadataprovider-for-using-custom-view-model-attributes.aspx Once this is in place, make sure you visit the jQuery UI and download the latest stable release – in this example I’m using version 1.8.2. You can download it here. Add the jQuery scripts and css theme to your project and add references to them in your master page. Should look something like the following: Site.Master <head runat="server"> <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" /></title> <link href="../../Content/Site.css" rel="stylesheet" type="text/css" /> <link href="../../css/ui-lightness/jquery-ui-1.8.2.custom.css" rel="stylesheet" type="text/css" /> <script src="../../Scripts/jquery-1.4.2.min.js" type="text/javascript"></script> <script src="../../Scripts/jquery-ui-1.8.2.custom.min.js" type="text/javascript"></script> </head> Once this is place we can get started. Creating the AutoComplete Custom Attribute The auto complete attribute will derive from the abstract MetadataAttribute created in my previous post. It will look like the following: AutoCompleteAttribute using System.Collections.Generic; using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Attributes { public class AutoCompleteAttribute : MetadataAttribute { public RouteValueDictionary RouteValueDictionary; public AutoCompleteAttribute(string controller, string action, string parameterName) { this.RouteValueDictionary = new RouteValueDictionary(); this.RouteValueDictionary.Add("Controller", controller); this.RouteValueDictionary.Add("Action", action); this.RouteValueDictionary.Add(parameterName, string.Empty); } public override void Process(ModelMetadata modelMetaData) { modelMetaData.AdditionalValues.Add("AutoCompleteUrlData", this.RouteValueDictionary); modelMetaData.TemplateHint = "AutoComplete"; } } } As you can see, the constructor takes in strings for the controller, action and parameter name. The parameter name will be used for passing the search text within the auto complete text box. The constructor then creates a new RouteValueDictionary which we will use later to construct the url for getting the auto complete results via ajax. The main interesting method is the method override called Process. With the process method, the route value dictionary is added to the modelMetaData AdditionalValues collection. The TemplateHint is also set to AutoComplete, this means that when the view model is parsed for display, the MVC 2 framework will look for a view user control template called AutoComplete, if it finds one, it uses that template to display the property. The View Model To show you how the attribute will look, this is the view model I have used in my example which can be downloaded at the end of this post. View Model using System.ComponentModel; using Mvc2Templates.Attributes; namespace Mvc2Templates.Models { public class TemplateDemoViewModel { [AutoComplete("Home", "AutoCompleteResult", "searchText")] [DisplayName("European Country Search")] public string SearchText { get; set; } } } As you can see, the auto complete attribute is called with the controller name, action name and the name of the action parameter that the search text will be passed into. The AutoComplete Template Now all of this is in place, it’s time to create the AutoComplete template. Create a ViewUserControl called AutoComplete.ascx at the following location within your application – Views/Shared/EditorTemplates/AutoComplete.ascx Add the following code: AutoComplete.ascx <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var propertyName = ViewData.ModelMetadata.PropertyName; var propertyValue = ViewData.ModelMetadata.Model; var id = Guid.NewGuid().ToString(); RouteValueDictionary urlData = (RouteValueDictionary)ViewData.ModelMetadata.AdditionalValues.Where(x => x.Key == "AutoCompleteUrlData").Single().Value; var url = Mvc2Templates.Views.Shared.Helpers.RouteHelper.GetUrl(this.ViewContext.RequestContext, urlData); %> <input type="text" name="<%= propertyName %>" value="<%= propertyValue %>" id="<%= id %>" class="autoComplete" /> <script type="text/javascript"> $(function () { $("#<%= id %>").autocomplete({ source: function (request, response) { $.ajax({ url: "<%= url %>" + request.term, dataType: "json", success: function (data) { response(data); } }); }, minLength: 2 }); }); </script> There is a lot going on in here but when you break it down it’s quite simple. Firstly, the property name and property value are retrieved through the model meta data. These are required to ensure that the text box input has the correct name and data to allow for model binding. If you look at line 14 you can see them being used in the text box input creation. The interesting bit is on line 8 and 9, this is the code to retrieve the route value dictionary we added into the model metada via the custom attribute. Line 11 is used to create the url, in order to do this I created a quick helper class which looks like the code below titled RouteHelper. The last bit of script is the code to initialise the jQuery UI AutoComplete control with the correct url for calling back to our controller action. RouteHelper using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Views.Shared.Helpers { public static class RouteHelper { const string Controller = "Controller"; const string Action = "Action"; const string ReplaceFormatString = "REPLACE{0}"; public static string GetUrl(RequestContext requestContext, RouteValueDictionary routeValueDictionary) { RouteValueDictionary urlData = new RouteValueDictionary(); UrlHelper urlHelper = new UrlHelper(requestContext); int i = 0; foreach(var item in routeValueDictionary) { if (item.Value == string.Empty) { i++; urlData.Add(item.Key, string.Format(ReplaceFormatString, i.ToString())); } else { urlData.Add(item.Key, item.Value); } } var url = urlHelper.RouteUrl(urlData); for (int index = 1; index <= i; index++) { url = url.Replace(string.Format(ReplaceFormatString, index.ToString()), string.Empty); } return url; } } } See it in action All you need to do to see it in action is pass a view model from your controller with the new AutoComplete attribute attached and call the following within your view: <%= this.Html.EditorForModel() %> NOTE: The jQuery UI auto complete control expects a JSON string returned from your controller action method… as you can’t use the JsonResult to perform GET requests, use a normal action result, convert your data into json and return it as a string via a ContentResult. If you download the solution it will be very clear how to handle the controller and action for this demo. The full source code for this post can be downloaded here. It has been developed using MVC 2 and Visual Studio 2010. As always, I hope this has been interesting/useful. Kind Regards, Sean McAlinden.

Read the article

Loading jQuery Consistently in a .NET Web App

- by Rick Strahl

One thing that frequently comes up in discussions when using jQuery is how to best load the jQuery library (as well as other commonly used and updated libraries) in a Web application. Specifically the issue is the one of versioning and making sure that you can easily update and switch versions of script files with application wide settings in one place and having your script usage reflect those settings in the entire application on all pages that use the script. Although I use jQuery as an example here, the same concepts can be applied to any script library - for example in my Web libraries I use the same approach for jQuery.ui and my own internal jQuery support library. The concepts used here can be applied both in WebForms and MVC. Loading jQuery Properly From CDN Before we look at a generic way to load jQuery via some server logic, let me first point out my preferred way to embed jQuery into the page. I use the Google CDN to load jQuery and then use a fallback URL to handle the offline or no Internet connection scenario. Why use a CDN? CDN links tend to be loaded more quickly since they are very likely to be cached in user's browsers already as jQuery CDN is used by many, many sites on the Web. Using a CDN also removes load from your Web server and puts the load bearing on the CDN provider - in this case Google - rather than on your Web site. On the downside, CDN links gives the provider (Google, Microsoft) yet another way to track users through their Web usage. Here's how I use jQuery CDN plus a fallback link on my WebLog for example: <!DOCTYPE HTML> <html> <head> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> <script> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript " + "src='/Weblog/wwSC.axd?r=Westwind.Web.Controls.Resources.jquery.js' %3E%3C/script%3E")); </script> <title>Rick Strahl's Web Log</title> ... </head> You can see that the CDN is referenced first, followed by a small script block that checks to see whether jQuery was loaded (jQuery object exists). If it didn't load another script reference is added to the document dynamically pointing to a backup URL. In this case my backup URL points at a WebResource in my Westwind.Web assembly, but the URL can also be local script like src="/scripts/jquery.min.js". Important: Use the proper Protocol/Scheme for for CDN Urls [updated based on comments] If you're using a CDN to load an external script resource you should always make sure that the script is loaded with the same protocol as the parent page to avoid mixed content warnings by the browser. You don't want to load a script link to an http:// resource when you're on an https:// page. The easiest way to use this is by using a protocol relative URL: <script src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script> which is an easy way to load resources from other domains. This URL syntax will automatically use the parent page's protocol (or more correctly scheme). As long as the remote domains support both http:// and https:// access this should work. BTW this also works in CSS (with some limitations) and links. BTW, I didn't know about this until it was pointed out in the comments. This is a very useful feature for many things - ah the benefits of my blog to myself :-) Version Numbers When you use a CDN you notice that you have to reference a specific version of jQuery. When using local files you may not have to do this as you can rename your private copy of jQuery.js, but for CDN the references are always versioned. The version number is of course very important to ensure you getting the version you have tested with, but it's also important to the provider because it ensures that cached content is always correct. If an existing file was updated the updates might take a very long time to get past the locally cached content and won't refresh properly. The version number ensures you get the right version and not some cached content that has been changed but not updated in your cache. On the other hand version numbers also mean that once you decide to use a new version of the script you now have to change all your script references in your pages. Depending on whether you use some sort of master/layout page or not this may or may not be easy in your application. Even if you do use master/layout pages, chances are that you probably have a few of them and at the very least all of those have to be updated for the scripts. If you use individual pages for all content this issue then spreads to all of your pages. Search and Replace in Files will do the trick, but it's still something that's easy to forget and worry about. Personaly I think it makes sense to have a single place where you can specify common script libraries that you want to load and more importantly which versions thereof and where they are loaded from. Loading Scripts via Server Code Script loading has always been important to me and as long as I can remember I've always built some custom script loading routines into my Web frameworks. WebForms makes this fairly easy because it has a reasonably useful script manager (ClientScriptManager and the ScriptManager) which allow injecting script into the page easily from anywhere in the Page cycle. What's nice about these components is that they allow scripts to be injected by controls so components can wrap up complex script/resource dependencies more easily without having to require long lists of CSS/Scripts/Image includes. In MVC or pure script driven applications like Razor WebPages the process is more raw, requiring you to embed script references in the right place. But its also more immediate - it lets you know exactly which versions of scripts to use because you have to manually embed them. In WebForms with different controls loading resources this often can get confusing because it's quite possible to load multiple versions of the same script library into a page, the results of which are less than optimal… In this post I look a simple routine that embeds jQuery into the page based on a few application wide configuration settings. It returns only a string of the script tags that can be manually embedded into a Page template. It's a small function that merely a string of the script tags shown at the begging of this post along with some options on how that string is comprised. You'll be able to specify in one place which version loads and then all places where the help function is used will automatically reflect this selection. Options allow specification of the jQuery CDN Url, the fallback Url and where jQuery should be loaded from (script folder, Resource or CDN in my case). While this is specific to jQuery you can apply this to other resources as well. For example I use a similar approach with jQuery.ui as well using practically the same semantics. Providing Resources in ControlResources In my Westwind.Web Web utility library I have a class called ControlResources which is responsible for holding resource Urls, resource IDs and string contants that reference those resource IDs. The library also provides a few helper methods for loading common scriptscripts into a Web page. There are specific versions for WebForms which use the ClientScriptManager/ScriptManager and script link methods that can be used in any .NET technology that can embed an expression into the output template (or code for that matter). The ControlResources class contains mostly static content - references to resources mostly. But it also contains a few static properties that configure script loading: A Script LoadMode (CDN, Resource, or script url) A default CDN Url A fallback url They are static properties in the ControlResources class: public class ControlResources { /// <summary> /// Determines what location jQuery is loaded from /// </summary> public static JQueryLoadModes jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryCdnUrl = "//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"; /// <summary> /// jQuery CDN Url on Google /// </summary> public static string jQueryUiCdnUrl = "//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"; /// <summary> /// jQuery UI fallback Url if CDN is unavailable or WebResource is used /// Note: The file needs to exist and hold the minimized version of jQuery ui /// </summary> public static string jQueryUiLocalFallbackUrl = "~/scripts/jquery-ui.min.js"; } These static properties are fixed values that can be changed at application startup to reflect your preferences. Since they're static they are application wide settings and respected across the entire Web application running. It's best to set these default in Application_Init or similar startup code if you need to change them for your application: protected void Application_Start(object sender, EventArgs e) { // Force jQuery to be loaded off Google Content Network ControlResources.jQueryLoadMode = JQueryLoadModes.ContentDeliveryNetwork; // Allow overriding of the Cdn url ControlResources.jQueryCdnUrl = "http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"; // Route to our own internal handler App.OnApplicationStart(); } With these basic settings in place you can then embed expressions into a page easily. In WebForms use: <!DOCTYPE html> <html> <head runat="server"> <%= ControlResources.jQueryLink() %> <script src="scripts/ww.jquery.min.js"></script> </head> In Razor use: <!DOCTYPE html> <html> <head> @Html.Raw(ControlResources.jQueryLink()) <script src="scripts/ww.jquery.min.js"></script> </head> Note that in Razor you need to use @Html.Raw() to force the string NOT to escape. Razor by default escapes string results and this ensures that the HTML content is properly expanded as raw HTML text. Both the WebForms and Razor output produce: <!DOCTYPE html> <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> if (typeof (jQuery) == 'undefined') document.write(unescape("%3Cscript src='/WestWindWebToolkitWeb/WebResource.axd?d=-b6oWzgbpGb8uTaHDrCMv59VSmGhilZP5_T_B8anpGx7X-PmW_1eu1KoHDvox-XHqA1EEb-Tl2YAP3bBeebGN65tv-7-yAimtG4ZnoWH633pExpJor8Qp1aKbk-KQWSoNfRC7rQJHXVP4tC0reYzVw2&t=634535391996872492' type='text/javascript'%3E%3C/script%3E"));</script> <script src="scripts/ww.jquery.min.js"></script> </head> which produces the desired effect for both CDN load and fallback URL. The implementation of jQueryLink is pretty basic of course: /// <summary> /// Inserts a script link to load jQuery into the page based on the jQueryLoadModes settings /// of this class. Default load is by CDN plus WebResource fallback /// </summary> /// <param name="url"> /// An optional explicit URL to load jQuery from. Url is resolved. /// When specified no fallback is applied /// </param> /// <returns>full script tag and fallback script for jQuery to load</returns> public static string jQueryLink(JQueryLoadModes jQueryLoadMode = JQueryLoadModes.Default, string url = null) { string jQueryUrl = string.Empty; string fallbackScript = string.Empty; if (jQueryLoadMode == JQueryLoadModes.Default) jQueryLoadMode = ControlResources.jQueryLoadMode; if (!string.IsNullOrEmpty(url)) jQueryUrl = WebUtils.ResolveUrl(url); else if (jQueryLoadMode == JQueryLoadModes.WebResource) { Page page = new Page(); jQueryUrl = page.ClientScript.GetWebResourceUrl(typeof(ControlResources), ControlResources.JQUERY_SCRIPT_RESOURCE); } else if (jQueryLoadMode == JQueryLoadModes.ContentDeliveryNetwork) { jQueryUrl = ControlResources.jQueryCdnUrl; if (!string.IsNullOrEmpty(jQueryCdnUrl)) { // check if jquery loaded - if it didn't we're not online and use WebResource fallbackScript = @"<script type=""text/javascript"">if (typeof(jQuery) == 'undefined') document.write(unescape(""%3Cscript src='{0}' type='text/javascript'%3E%3C/script%3E""));</script>"; fallbackScript = string.Format(fallbackScript, WebUtils.ResolveUrl(ControlResources.jQueryCdnFallbackUrl)); } } string output = "<script src=\"" + jQueryUrl + "\" type=\"text/javascript\"></script>"; // add in the CDN fallback script code if (!string.IsNullOrEmpty(fallbackScript)) output += "\r\n" + fallbackScript + "\r\n"; return output; } There's one dependency here on WebUtils.ResolveUrl() which resolves Urls without access to a Page/Control (another one of those features that should be in the runtime, not in the WebForms or MVC engine). You can see there's only a little bit of logic in this code that deals with potentially different load modes. I can load scripts from a Url, WebResources or - my preferred way - from CDN. Based on the static settings the scripts to embed are composed to be returned as simple string <script> tag(s). I find this extremely useful especially when I'm not connected to the internet so that I can quickly swap in a local jQuery resource instead of loading from CDN. While CDN loading with the fallback works it can be a bit slow as the CDN is probed first before the fallback kicks in. Switching quickly in one place makes this trivial. It also makes it very easy once a new version of jQuery rolls around to move up to the new version and ensure that all pages are using the new version immediately. I'm not trying to make this out as 'the' definite way to load your resources, but rather provide it here as a pointer so you can maybe apply your own logic to determine where scripts come from and how they load. You could even automate this some more by using configuration settings or reading the locations/preferences out of some sort of data/metadata store that can be dynamically updated instead via recompilation. FWIW, I use a very similar approach for loading jQuery UI and my own ww.jquery library - the same concept can be applied to any kind of script you might be loading from different locations. Hopefully some of you find this a useful addition to your toolset. Resources Google CDN for jQuery Full ControlResources Source Code ControlResource Documentation Westwind.Web NuGet This method is part of the Westwind.Web library of the West Wind Web Toolkit or you can grab the Web library from NuGet and add to your Visual Studio project. This package includes a host of Web related utilities and script support features. © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET jQuery Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Using JSON.NET for dynamic JSON parsing

- by Rick Strahl

With the release of ASP.NET Web API as part of .NET 4.5 and MVC 4.0, JSON.NET has effectively pushed out the .NET native serializers to become the default serializer for Web API. JSON.NET is vastly more flexible than the built in DataContractJsonSerializer or the older JavaScript serializer. The DataContractSerializer in particular has been very problematic in the past because it can't deal with untyped objects for serialization - like values of type object, or anonymous types which are quite common these days. The JavaScript Serializer that came before it actually does support non-typed objects for serialization but it can't do anything with untyped data coming in from JavaScript and it's overall model of extensibility was pretty limited (JavaScript Serializer is what MVC uses for JSON responses). JSON.NET provides a robust JSON serializer that has both high level and low level components, supports binary JSON, JSON contracts, Xml to JSON conversion, LINQ to JSON and many, many more features than either of the built in serializers. ASP.NET Web API now uses JSON.NET as its default serializer and is now pulled in as a NuGet dependency into Web API projects, which is great. Dynamic JSON Parsing One of the features that I think is getting ever more important is the ability to serialize and deserialize arbitrary JSON content dynamically - that is without mapping the JSON captured directly into a .NET type as DataContractSerializer or the JavaScript Serializers do. Sometimes it isn't possible to map types due to the differences in languages (think collections, dictionaries etc), and other times you simply don't have the structures in place or don't want to create them to actually import the data. If this topic sounds familiar - you're right! I wrote about dynamic JSON parsing a few months back before JSON.NET was added to Web API and when Web API and the System.Net HttpClient libraries included the System.Json classes like JsonObject and JsonArray. With the inclusion of JSON.NET in Web API these classes are now obsolete and didn't ship with Web API or the client libraries. I re-linked my original post to this one. In this post I'll discus JToken, JObject and JArray which are the dynamic JSON objects that make it very easy to create and retrieve JSON content on the fly without underlying types. Why Dynamic JSON? So, why Dynamic JSON parsing rather than strongly typed parsing? Since applications are interacting more and more with third party services it becomes ever more important to have easy access to those services with easy JSON parsing. Sometimes it just makes lot of sense to pull just a small amount of data out of large JSON document received from a service, because the third party service isn't directly related to your application's logic most of the time - and it makes little sense to map the entire service structure in your application. For example, recently I worked with the Google Maps Places API to return information about businesses close to me (or rather the app's) location. The Google API returns a ton of information that my application had no interest in - all I needed was few values out of the data. Dynamic JSON parsing makes it possible to map this data, without having to map the entire API to a C# data structure. Instead I could pull out the three or four values I needed from the API and directly store it on my business entities that needed to receive the data - no need to map the entire Maps API structure. Getting JSON.NET The easiest way to use JSON.NET is to grab it via NuGet and add it as a reference to your project. You can add it to your project with: PM> Install-Package Newtonsoft.Json From the Package Manager Console or by using Manage NuGet Packages in your project References. As mentioned if you're using ASP.NET Web API or MVC 4 JSON.NET will be automatically added to your project. Alternately you can also go to the CodePlex site and download the latest version including source code: http://json.codeplex.com/ Creating JSON on the fly with JObject and JArray Let's start with creating some JSON on the fly. It's super easy to create a dynamic object structure with any of the JToken derived JSON.NET objects. The most common JToken derived classes you are likely to use are JObject and JArray. JToken implements IDynamicMetaProvider and so uses the dynamic keyword extensively to make it intuitive to create object structures and turn them into JSON via dynamic object syntax. Here's an example of creating a music album structure with child songs using JObject for the base object and songs and JArray for the actual collection of songs:[TestMethod] public void JObjectOutputTest() { // strong typed instance var jsonObject = new JObject(); // you can explicitly add values here using class interface jsonObject.Add("Entered", DateTime.Now); // or cast to dynamic to dynamically add/read properties dynamic album = jsonObject; album.AlbumName = "Dirty Deeds Done Dirt Cheap"; album.Artist = "AC/DC"; album.YearReleased = 1976; album.Songs = new JArray() as dynamic; dynamic song = new JObject(); song.SongName = "Dirty Deeds Done Dirt Cheap"; song.SongLength = "4:11"; album.Songs.Add(song); song = new JObject(); song.SongName = "Love at First Feel"; song.SongLength = "3:10"; album.Songs.Add(song); Console.WriteLine(album.ToString()); } This produces a complete JSON structure: { "Entered": "2012-08-18T13:26:37.7137482-10:00", "AlbumName": "Dirty Deeds Done Dirt Cheap", "Artist": "AC/DC", "YearReleased": 1976, "Songs": [ { "SongName": "Dirty Deeds Done Dirt Cheap", "SongLength": "4:11" }, { "SongName": "Love at First Feel", "SongLength": "3:10" } ] } Notice that JSON.NET does a nice job formatting the JSON, so it's easy to read and paste into blog posts :-). JSON.NET includes a bunch of configuration options that control how JSON is generated. Typically the defaults are just fine, but you can override with the JsonSettings object for most operations. The important thing about this code is that there's no explicit type used for holding the values to serialize to JSON. Rather the JSON.NET objects are the containers that receive the data as I build up my JSON structure dynamically, simply by adding properties. This means this code can be entirely driven at runtime without compile time restraints of structure for the JSON output. Here I use JObject to create a album 'object' and immediately cast it to dynamic. JObject() is kind of similar in behavior to ExpandoObject in that it allows you to add properties by simply assigning to them. Internally, JObject values are stored in pseudo collections of key value pairs that are exposed as properties through the IDynamicMetaObject interface exposed in JSON.NET's JToken base class. For objects the syntax is very clean - you add simple typed values as properties. For objects and arrays you have to explicitly create new JObject or JArray, cast them to dynamic and then add properties and items to them. Always remember though these values are dynamic - which means no Intellisense and no compiler type checking. It's up to you to ensure that the names and values you create are accessed consistently and without typos in your code. Note that you can also access the JObject instance directly (not as dynamic) and get access to the underlying JObject type. This means you can assign properties by string, which can be useful for fully data driven JSON generation from other structures. Below you can see both styles of access next to each other:// strong type instance var jsonObject = new JObject(); // you can explicitly add values here jsonObject.Add("Entered", DateTime.Now); // expando style instance you can just 'use' properties dynamic album = jsonObject; album.AlbumName = "Dirty Deeds Done Dirt Cheap"; JContainer (the base class for JObject and JArray) is a collection so you can also iterate over the properties at runtime easily:foreach (var item in jsonObject) { Console.WriteLine(item.Key + " " + item.Value.ToString()); } The functionality of the JSON objects are very similar to .NET's ExpandObject and if you used it before, you're already familiar with how the dynamic interfaces to the JSON objects works. Importing JSON with JObject.Parse() and JArray.Parse() The JValue structure supports importing JSON via the Parse() and Load() methods which can read JSON data from a string or various streams respectively. Essentially JValue includes the core JSON parsing to turn a JSON string into a collection of JsonValue objects that can be then referenced using familiar dynamic object syntax. Here's a simple example:public void JValueParsingTest() { var jsonString = @"{""Name"":""Rick"",""Company"":""West Wind"", ""Entered"":""2012-03-16T00:03:33.245-10:00""}"; dynamic json = JValue.Parse(jsonString); // values require casting string name = json.Name; string company = json.Company; DateTime entered = json.Entered; Assert.AreEqual(name, "Rick"); Assert.AreEqual(company, "West Wind"); } The JSON string represents an object with three properties which is parsed into a JObject class and cast to dynamic. Once cast to dynamic I can then go ahead and access the object using familiar object syntax. Note that the actual values - json.Name, json.Company, json.Entered - are actually of type JToken and I have to cast them to their appropriate types first before I can do type comparisons as in the Asserts at the end of the test method. This is required because of the way that dynamic types work which can't determine the type based on the method signature of the Assert.AreEqual(object,object) method. I have to either assign the dynamic value to a variable as I did above, or explicitly cast ( (string) json.Name) in the actual method call. The JSON structure can be much more complex than this simple example. Here's another example of an array of albums serialized to JSON and then parsed through with JsonValue():[TestMethod] public void JsonArrayParsingTest() { var jsonString = @"[ { ""Id"": ""b3ec4e5c"", ""AlbumName"": ""Dirty Deeds Done Dirt Cheap"", ""Artist"": ""AC/DC"", ""YearReleased"": 1976, ""Entered"": ""2012-03-16T00:13:12.2810521-10:00"", ""AlbumImageUrl"": ""http://ecx.images-amazon.com/images/I/61kTaH-uZBL._AA115_.jpg"", ""AmazonUrl"": ""http://www.amazon.com/gp/product/…ASIN=B00008BXJ4"", ""Songs"": [ { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Dirty Deeds Done Dirt Cheap"", ""SongLength"": ""4:11"" }, { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Love at First Feel"", ""SongLength"": ""3:10"" }, { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Big Balls"", ""SongLength"": ""2:38"" } ] }, { ""Id"": ""7b919432"", ""AlbumName"": ""End of the Silence"", ""Artist"": ""Henry Rollins Band"", ""YearReleased"": 1992, ""Entered"": ""2012-03-16T00:13:12.2800521-10:00"", ""AlbumImageUrl"": ""http://ecx.images-amazon.com/images/I/51FO3rb1tuL._SL160_AA160_.jpg"", ""AmazonUrl"": ""http://www.amazon.com/End-Silence-Rollins-Band/dp/B0000040OX/ref=sr_1_5?ie=UTF8&qid=1302232195&sr=8-5"", ""Songs"": [ { ""AlbumId"": ""7b919432"", ""SongName"": ""Low Self Opinion"", ""SongLength"": ""5:24"" }, { ""AlbumId"": ""7b919432"", ""SongName"": ""Grip"", ""SongLength"": ""4:51"" } ] } ]"; JArray jsonVal = JArray.Parse(jsonString) as JArray; dynamic albums = jsonVal; foreach (dynamic album in albums) { Console.WriteLine(album.AlbumName + " (" + album.YearReleased.ToString() + ")"); foreach (dynamic song in album.Songs) { Console.WriteLine("\t" + song.SongName); } } Console.WriteLine(albums[0].AlbumName); Console.WriteLine(albums[0].Songs[1].SongName); } JObject and JArray in ASP.NET Web API Of course these types also work in ASP.NET Web API controller methods. If you want you can accept parameters using these object or return them back to the server. The following contrived example receives dynamic JSON input, and then creates a new dynamic JSON object and returns it based on data from the first:[HttpPost] public JObject PostAlbumJObject(JObject jAlbum) { // dynamic input from inbound JSON dynamic album = jAlbum; // create a new JSON object to write out dynamic newAlbum = new JObject(); // Create properties on the new instance // with values from the first newAlbum.AlbumName = album.AlbumName + " New"; newAlbum.NewProperty = "something new"; newAlbum.Songs = new JArray(); foreach (dynamic song in album.Songs) { song.SongName = song.SongName + " New"; newAlbum.Songs.Add(song); } return newAlbum; } The raw POST request to the server looks something like this: POST http://localhost/aspnetwebapi/samples/PostAlbumJObject HTTP/1.1User-Agent: FiddlerContent-type: application/jsonHost: localhostContent-Length: 88 {AlbumName: "Dirty Deeds",Songs:[ { SongName: "Problem Child"},{ SongName: "Squealer"}]} and the output that comes back looks like this: { "AlbumName": "Dirty Deeds New", "NewProperty": "something new", "Songs": [ { "SongName": "Problem Child New" }, { "SongName": "Squealer New" } ]} The original values are echoed back with something extra appended to demonstrate that we're working with a new object. When you receive or return a JObject, JValue, JToken or JArray instance in a Web API method, Web API ignores normal content negotiation and assumes your content is going to be received and returned as JSON, so effectively the parameter and result type explicitly determines the input and output format which is nice. Dynamic to Strong Type Mapping You can also map JObject and JArray instances to a strongly typed object, so you can mix dynamic and static typing in the same piece of code. Using the 2 Album jsonString shown earlier, the code below takes an array of albums and picks out only a single album and casts that album to a static Album instance.[TestMethod] public void JsonParseToStrongTypeTest() { JArray albums = JArray.Parse(jsonString) as JArray; // pick out one album JObject jalbum = albums[0] as JObject; // Copy to a static Album instance Album album = jalbum.ToObject<Album>(); Assert.IsNotNull(album); Assert.AreEqual(album.AlbumName,jalbum.Value<string>("AlbumName")); Assert.IsTrue(album.Songs.Count > 0); } This is pretty damn useful for the scenario I mentioned earlier - you can read a large chunk of JSON and dynamically walk the property hierarchy down to the item you want to access, and then either access the specific item dynamically (as shown earlier) or map a part of the JSON to a strongly typed object. That's very powerful if you think about it - it leaves you in total control to decide what's dynamic and what's static. Strongly typed JSON Parsing With all this talk of dynamic let's not forget that JSON.NET of course also does strongly typed serialization which is drop dead easy. Here's a simple example on how to serialize and deserialize an object with JSON.NET:[TestMethod] public void StronglyTypedSerializationTest() { // Demonstrate deserialization from a raw string var album = new Album() { AlbumName = "Dirty Deeds Done Dirt Cheap", Artist = "AC/DC", Entered = DateTime.Now, YearReleased = 1976, Songs = new List<Song>() { new Song() { SongName = "Dirty Deeds Done Dirt Cheap", SongLength = "4:11" }, new Song() { SongName = "Love at First Feel", SongLength = "3:10" } } }; // serialize to string string json2 = JsonConvert.SerializeObject(album,Formatting.Indented); Console.WriteLine(json2); // make sure we can serialize back var album2 = JsonConvert.DeserializeObject<Album>(json2); Assert.IsNotNull(album2); Assert.IsTrue(album2.AlbumName == "Dirty Deeds Done Dirt Cheap"); Assert.IsTrue(album2.Songs.Count == 2); } JsonConvert is a high level static class that wraps lower level functionality, but you can also use the JsonSerializer class, which allows you to serialize/parse to and from streams. It's a little more work, but gives you a bit more control. The functionality available is easy to discover with Intellisense, and that's good because there's not a lot in the way of documentation that's actually useful. Summary JSON.NET is a pretty complete JSON implementation with lots of different choices for JSON parsing from dynamic parsing to static serialization, to complex querying of JSON objects using LINQ. It's good to see this open source library getting integrated into .NET, and pushing out the old and tired stock .NET parsers so that we finally have a bit more flexibility - and extensibility - in our JSON parsing. Good to go! Resources Sample Test Project http://json.codeplex.com/© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET Web Api AJAX Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Making WCF Output a single WSDL file for interop purposes.

- by Glav

By default, when WCF emits a WSDL definition for your services, it can often contain many links to others related schemas that need to be imported. For the most part, this is fine. WCF clients understand this type of schema without issue, and it conforms to the requisite standards as far as WSDL definitions go. However, some non Microsoft stacks will only work with a single WSDL file and require that all definitions for the service(s) (port types, messages, operation etc…) are contained within that single file. In other words, no external imports are supported. Some Java clients (to my working knowledge) have this limitation. This obviously presents a problem when trying to create services exposed for consumption and interop by these clients. Note: You can download the full source code for this sample from here To illustrate this point, lets say we have a simple service that looks like: Service Contract public interface IService1 { [OperationContract] [FaultContract(typeof(DataFault))] string GetData(DataModel1 model); [OperationContract] [FaultContract(typeof(DataFault))] string GetMoreData(DataModel2 model); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Service Implementation/Behaviour public class Service1 : IService1 { public string GetData(DataModel1 model) { return string.Format("Some Field was: {0} and another field was {1}", model.SomeField,model.AnotherField); } public string GetMoreData(DataModel2 model) { return string.Format("Name: {0}, age: {1}", model.Name, model.Age); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Configuration File <system.serviceModel> <services> <service name="SingleWSDL_WcfService.Service1" behaviorConfiguration="SingleWSDL_WcfService.Service1Behavior">  <endpoint address ="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" > ....... </services> <behaviors> <serviceBehaviors> <behavior name="SingleWSDL_WcfService.Service1Behavior"> ........ </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When WCF is asked to produce a WSDL for this service, it will produce a file that looks something like this (note: some sections omitted for brevity): <?xml version="1.0" encoding="utf-8" ?> - <wsdl:definitions name="Service1" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" ...... namespace definitions omitted for brevity + <wsp:Policy wsu:Id="WSHttpBinding_IService1_policy"> ... multiple policy items omitted for brevity </wsp:Policy> - <wsdl:types> - <xsd:schema targetNamespace="http://tempuri.org/Imports"> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd0" namespace="http://tempuri.org/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd3" namespace="Http://SingleWSDL/Fault" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd1" namespace="http://schemas.microsoft.com/2003/10/Serialization/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd2" namespace="http://SingleWSDL/Model1" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd4" namespace="http://SingleWSDL/Model2" /> </xsd:schema> </wsdl:types> + <wsdl:message name="IService1_GetData_InputMessage"> .... </wsdl:message> - <wsdl:operation name="GetData"> ..... </wsdl:operation> - <wsdl:service name="Service1"> ....... </wsdl:service> </wsdl:definitions> The above snippet from the WSDL shows the external links and references that are generated by WCF for a relatively simple service. Note the xsd:import statements that reference external XSD definitions which are also generated by WCF. In order to get WCF to produce a single WSDL file, we first need to follow some good practices when it comes to WCF service definitions. Step 1: Define a namespace for your service contract. [ServiceContract(Namespace="http://SingleWSDL/Service1")] public interface IService1 { ...... } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Normally you would not use a literal string and may instead define a constant to use in your own application for the namespace. When this is applied and we generate the WSDL, we get the following statement inserted into the document: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl=wsdl0" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } All the previous imports have gone. If we follow this link, we will see that the XSD imports are now in this external WSDL file. Not really any benefit for our purposes. Step 2: Define a namespace for your service behaviour [ServiceBehavior(Namespace = "http://SingleWSDL/Service1")] public class Service1 : IService1 { ...... } As you can see, the namespace of the service behaviour should be the same as the service contract interface to which it implements. Failure to do these tasks will cause WCF to emit its default http://tempuri.org namespace all over the place and cause WCF to still generate import statements. This is also true if the namespace of the contract and behaviour differ. If you define one and not the other, defaults kick in, and you’ll find extra imports generated. While each of the previous 2 steps wont cause any less import statements to be generated, you will notice that namespace definitions within the WSDL have identical, well defined names. Step 3: Define a binding namespace In the configuration file, modify the endpoint configuration line item to iunclude a bindingNamespace attribute which is the same as that defined on the service behaviour and service contract <endpoint address="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" bindingNamespace="http://SingleWSDL/Service1"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } However, this does not completely solve the issue. What this will do is remove the WSDL import statements like this one: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } from the generated WSDL. Finally…. the magic…. Step 4: Use a custom endpoint behaviour to read in external imports and include in the main WSDL output. In order to force WCF to output a single WSDL with all the required definitions, we need to define a custom WSDL Export extension that can be applied to any endpoints. This requires implementing the IWsdlExportExtension and IEndpointBehavior interfaces and then reading in any imported schemas, and adding that output to the main, flattened WSDL to be output. Sounds like fun right…..? Hmmm well maybe not. This step sounds a little hairy, but its actually quite easy thanks to some kind individuals who have already done this for us. As far as I know, there are 2 available implementations that we can easily use to perform the import and “WSDL flattening”. WCFExtras which is on codeplex and FlatWsdl by Thinktecture. Both implementations actually do exactly the same thing with the imports and provide an endpoint behaviour, however FlatWsdl does a little more work for us by providing a ServiceHostFactory that we can use which automatically attaches the requisite behaviour to our endpoints for us. To use this in an IIS hosted service, we can modify the .SVC file to specify this ne factory to use like so: <%@ ServiceHost Language="C#" Debug="true" Service="SingleWSDL_WcfService.Service1" Factory="Thinktecture.ServiceModel.Extensions.Description.FlatWsdlServiceHostFactory" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Within a service application or another form of executable such as a console app, we can simply create an instance of the custom service host and open it as we normally would as shown here: FlatWsdlServiceHost host = new FlatWsdlServiceHost(typeof(Service1)); host.Open(); And we are done. WCF will now generate one single WSDL file that contains all he WSDL imports and data/XSD imports. You can download the full source code for this sample from here Hope this has helped you. Note: Please note that I have not extensively tested this in a number of different scenarios so no guarantees there.

Read the article

Making WCF Output a single WSDL file for interop purposes.

By default, when WCF emits a WSDL definition for your services, it can often contain many links to others related schemas that need to be imported. For the most part, this is fine. WCF clients understand this type of schema without issue, and it conforms to the requisite standards as far as WSDL definitions go. However, some non Microsoft stacks will only work with a single WSDL file and require that all definitions for the service(s) (port types, messages, operation etc) are contained within that single file. In other words, no external imports are supported. Some Java clients (to my working knowledge) have this limitation. This obviously presents a problem when trying to create services exposed for consumption and interop by these clients. Note: You can download the full source code for this sample from here To illustrate this point, lets say we have a simple service that looks like: Service Contract public interface IService1 { [OperationContract] [FaultContract(typeof(DataFault))] string GetData(DataModel1 model); [OperationContract] [FaultContract(typeof(DataFault))] string GetMoreData(DataModel2 model); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Service Implementation/Behaviour public class Service1 : IService1 { public string GetData(DataModel1 model) { return string.Format("Some Field was: {0} and another field was {1}", model.SomeField,model.AnotherField); } public string GetMoreData(DataModel2 model) { return string.Format("Name: {0}, age: {1}", model.Name, model.Age); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Configuration File <system.serviceModel> <services> <service name="SingleWSDL_WcfService.Service1" behaviorConfiguration="SingleWSDL_WcfService.Service1Behavior">  <endpoint address ="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" > ....... </services> <behaviors> <serviceBehaviors> <behavior name="SingleWSDL_WcfService.Service1Behavior"> ........ </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When WCF is asked to produce a WSDL for this service, it will produce a file that looks something like this (note: some sections omitted for brevity): <?xml version="1.0" encoding="utf-8" ?> - <wsdl:definitions name="Service1" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" ...... namespace definitions omitted for brevity + <wsp:Policy wsu:Id="WSHttpBinding_IService1_policy"> ... multiple policy items omitted for brevity </wsp:Policy> - <wsdl:types> - <xsd:schema targetNamespace="http://tempuri.org/Imports"> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd0" namespace="http://tempuri.org/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd3" namespace="Http://SingleWSDL/Fault" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd1" namespace="http://schemas.microsoft.com/2003/10/Serialization/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd2" namespace="http://SingleWSDL/Model1" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd4" namespace="http://SingleWSDL/Model2" /> </xsd:schema> </wsdl:types> + <wsdl:message name="IService1_GetData_InputMessage"> .... </wsdl:message> - <wsdl:operation name="GetData"> ..... </wsdl:operation> - <wsdl:service name="Service1"> ....... </wsdl:service> </wsdl:definitions> The above snippet from the WSDL shows the external links and references that are generated by WCF for a relatively simple service. Note the xsd:import statements that reference external XSD definitions which are also generated by WCF. In order to get WCF to produce a single WSDL file, we first need to follow some good practices when it comes to WCF service definitions. Step 1: Define a namespace for your service contract. [ServiceContract(Namespace="http://SingleWSDL/Service1")] public interface IService1 { ...... } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Normally you would not use a literal string and may instead define a constant to use in your own application for the namespace. When this is applied and we generate the WSDL, we get the following statement inserted into the document: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl=wsdl0" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } All the previous imports have gone. If we follow this link, we will see that the XSD imports are now in this external WSDL file. Not really any benefit for our purposes. Step 2: Define a namespace for your service behaviour [ServiceBehavior(Namespace = "http://SingleWSDL/Service1")] public class Service1 : IService1 { ...... } As you can see, the namespace of the service behaviour should be the same as the service contract interface to which it implements. Failure to do these tasks will cause WCF to emit its default http://tempuri.org namespace all over the place and cause WCF to still generate import statements. This is also true if the namespace of the contract and behaviour differ. If you define one and not the other, defaults kick in, and youll find extra imports generated. While each of the previous 2 steps wont cause any less import statements to be generated, you will notice that namespace definitions within the WSDL have identical, well defined names. Step 3: Define a binding namespace In the configuration file, modify the endpoint configuration line item to iunclude a bindingNamespace attribute which is the same as that defined on the service behaviour and service contract <endpoint address="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" bindingNamespace="http://SingleWSDL/Service1"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } However, this does not completely solve the issue. What this will do is remove the WSDL import statements like this one: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } from the generated WSDL. Finally. the magic. Step 4: Use a custom endpoint behaviour to read in external imports and include in the main WSDL output. In order to force WCF to output a single WSDL with all the required definitions, we need to define a custom WSDL Export extension that can be applied to any endpoints. This requires implementing the IWsdlExportExtension and IEndpointBehavior interfaces and then reading in any imported schemas, and adding that output to the main, flattened WSDL to be output. Sounds like fun right..? Hmmm well maybe not. This step sounds a little hairy, but its actually quite easy thanks to some kind individuals who have already done this for us. As far as I know, there are 2 available implementations that we can easily use to perform the import and WSDL flattening. WCFExtras which is on codeplex and FlatWsdl by Thinktecture. Both implementations actually do exactly the same thing with the imports and provide an endpoint behaviour, however FlatWsdl does a little more work for us by providing a ServiceHostFactory that we can use which automatically attaches the requisite behaviour to our endpoints for us. To use this in an IIS hosted service, we can modify the .SVC file to specify this ne factory to use like so: <%@ ServiceHost Language="C#" Debug="true" Service="SingleWSDL_WcfService.Service1" Factory="Thinktecture.ServiceModel.Extensions.Description.FlatWsdlServiceHostFactory" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Within a service application or another form of executable such as a console app, we can simply create an instance of the custom service host and open it as we normally would as shown here: FlatWsdlServiceHost host = new FlatWsdlServiceHost(typeof(Service1)); host.Open(); And we are done. WCF will now generate one single WSDL file that contains all he WSDL imports and data/XSD imports. You can download the full source code for this sample from here Hope this has helped you. Note: Please note that I have not extensively tested this in a number of different scenarios so no guarantees there.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Use IIS Application Initialization for keeping ASP.NET Apps alive

- by Rick Strahl

I've been working quite a bit with Windows Services in the recent months, and well, it turns out that Windows Services are quite a bear to debug, deploy, update and maintain. The process of getting services set up, debugged and updated is a major chore that has to be extensively documented and or automated specifically. On most projects when a service is built, people end up scrambling for the right 'process' to use for administration. Web app deployment and maintenance on the other hand are common and well understood today, as we are constantly dealing with Web apps. There's plenty of infrastructure and tooling built into Web Tools like Visual Studio to facilitate the process. By comparison Windows Services or anything self-hosted for that matter seems convoluted.In fact, in a recent blog post I mentioned that on a recent project I'd been using self-hosting for SignalR inside of a Windows service, because the application is in fact a 'service' that also needs to send out lots of messages via SignalR. But the reality is that it could just as well be an IIS application with a service component that runs in the background. Either way you look at it, it's either a Windows Service with a built in Web Server, or an IIS application running a Service application, neither of which follows the standard Service or Web App template.Personally I much prefer Web applications. Running inside of IIS I get all the benefits of the IIS platform including service lifetime management (crash and restart), controlled shutdowns, the whole security infrastructure including easy certificate support, hot-swapping of code and the the ability to publish directly to IIS from within Visual Studio with ease.Because of these benefits we set out to move from the self hosted service into an ASP.NET Web app instead.The Missing Link for ASP.NET as a Service: Auto-LoadingI've had moments in the past where I wanted to run a 'service like' application in ASP.NET because when you think about it, it's so much easier to control a Web application remotely. Services are locked into start/stop operations, but if you host inside of a Web app you can write your own ticket and control it from anywhere. In fact nearly 10 years ago I built a background scheduling application that ran inside of ASP.NET and it worked great and it's still running doing its job today.The tricky part for running an app as a service inside of IIS then and now, is how to get IIS and ASP.NET launched so your 'service' stays alive even after an Application Pool reset. 7 years ago I faked it by using a web monitor (my own West Wind Web Monitor app) I was running anyway to monitor my various web sites for uptime, and having the monitor ping my 'service' every 20 seconds to effectively keep ASP.NET alive or fire it back up after a reload. I used a simple scheduler class that also includes some logic for 'self-reloading'. Hacky for sure, but it worked reliably.Luckily today it's much easier and more integrated to get IIS to launch ASP.NET as soon as an Application Pool is started by using the Application Initialization Module. The Application Initialization Module basically allows you to turn on Preloading on the Application Pool and the Site/IIS App, which essentially fires a request through the IIS pipeline as soon as the Application Pool has been launched. This means that effectively your ASP.NET app becomes active immediately, Application_Start is fired making sure your app stays up and running at all times. All the other features like Application Pool recycling and auto-shutdown after idle time still work, but IIS will then always immediately re-launch the application.Getting started with Application InitializationAs of IIS 8 Application Initialization is part of the IIS feature set. For IIS 7 and 7.5 there's a separate download available via Web Platform Installer. Using IIS 8 Application Initialization is an optional install component in Windows or the Windows Server Role Manager: This is an optional component so make sure you explicitly select it.IIS Configuration for Application InitializationInitialization needs to be applied on the Application Pool as well as the IIS Application level. As of IIS 8 these settings can be made through the IIS Administration console.Start with the Application Pool:Here you need to set both the Start Automatically which is always set, and the StartMode which should be set to AlwaysRunning. Both have to be set - the Start Automatically flag is set true by default and controls the starting of the application pool itself while Always Running flag is required in order to launch the application. Without the latter flag set the site settings have no effect.Now on the Site/Application level you can specify whether the site should pre load: Set the Preload Enabled flag to true.At this point ASP.NET apps should auto-load. This is all that's needed to pre-load the site if all you want is to get your site launched automatically.If you want a little more control over the load process you can add a few more settings to your web.config file that allow you to show a static page while the App is starting up. This can be useful if startup is really slow, so rather than displaying blank screen while the user is fiddling their thumbs you can display a static HTML page instead: <system.webServer> <applicationInitialization remapManagedRequestsTo="Startup.htm" skipManagedModules="true"> <add initializationPage="ping.ashx" /> </applicationInitialization> </system.webServer>This allows you to specify a page to execute in a dry run. IIS basically fakes request and pushes it directly into the IIS pipeline without hitting the network. You specify a page and IIS will fake a request to that page in this case ping.ashx which just returns a simple OK string - ie. a fast pipeline request. This request is run immediately after Application Pool restart, and while this request is running and your app is warming up, IIS can display an alternate static page - Startup.htm above. So instead of showing users an empty loading page when clicking a link on your site you can optionally show some sort of static status page that says, "we'll be right back". I'm not sure if that's such a brilliant idea since this can be pretty disruptive in some cases. Personally I think I prefer letting people wait, but at least get the response they were supposed to get back rather than a random page. But it's there if you need it.Note that the web.config stuff is optional. If you don't provide it IIS hits the default site link (/) and even if there's no matching request at the end of that request it'll still fire the request through the IIS pipeline. Ideally though you want to make sure that an ASP.NET endpoint is hit either with your default page, or by specify the initializationPage to ensure ASP.NET actually gets hit since it's possible for IIS fire unmanaged requests only for static pages (depending how your pipeline is configured).What about AppDomain Restarts?In addition to full Worker Process recycles at the IIS level, ASP.NET also has to deal with AppDomain shutdowns which can occur for a variety of reasons:Files are updated in the BIN folderWeb Deploy to your siteweb.config is changedHard application crashThese operations don't cause the worker process to restart, but they do cause ASP.NET to unload the current AppDomain and start up a new one. Because the features above only apply to Application Pool restarts, AppDomain restarts could also cause your 'ASP.NET service' to stop processing in the background.In order to keep the app running on AppDomain recycles, you can resort to a simple ping in the Application_End event:protected void Application_End() { var client = new WebClient(); var url = App.AdminConfiguration.MonitorHostUrl + "ping.aspx"; client.DownloadString(url); Trace.WriteLine("Application Shut Down Ping: " + url); }which fires any ASP.NET url to the current site at the very end of the pipeline shutdown which in turn ensures that the site immediately starts back up.Manual Configuration in ApplicationHost.configThe above UI corresponds to the following ApplicationHost.config settings. If you're using IIS 7, there's no UI for these flags so you'll have to manually edit them.When you install the Application Initialization component into IIS it should auto-configure the module into ApplicationHost.config. Unfortunately for me, with Mr. Murphy in his best form for me, the module registration did not occur and I had to manually add it.<globalModules> <add name="ApplicationInitializationModule" image="%windir%\System32\inetsrv\warmup.dll" /> </globalModules>Most likely you won't need ever need to add this, but if things are not working it's worth to check if the module is actually registered.Next you need to configure the ApplicationPool and the Web site. The following are the two relevant entries in ApplicationHost.config.<system.applicationHost> <applicationPools> <add name="West Wind West Wind Web Connection" autoStart="true" startMode="AlwaysRunning" managedRuntimeVersion="v4.0" managedPipelineMode="Integrated"> <processModel identityType="LocalSystem" setProfileEnvironment="true" /> </add> </applicationPools> <sites> <site name="Default Web Site" id="1"> <application path="/MPress.Workflow.WebQueueMessageManager" applicationPool="West Wind West Wind Web Connection" preloadEnabled="true"> <virtualDirectory path="/" physicalPath="C:\Clients\…" /> </application> </site> </sites> </system.applicationHost>On the Application Pool make sure to set the autoStart and startMode flags to true and AlwaysRunning respectively. On the site make sure to set the preloadEnabled flag to true.And that's all you should need. You can still set the web.config settings described above as well.ASP.NET as a Service?In the particular application I'm working on currently, we have a queue manager that runs as standalone service that polls a database queue and picks out jobs and processes them on several threads. The service can spin up any number of threads and keep these threads alive in the background while IIS is running doing its own thing. These threads are newly created threads, so they sit completely outside of the IIS thread pool. In order for this service to work all it needs is a long running reference that keeps it alive for the life time of the application.In this particular app there are two components that run in the background on their own threads: A scheduler that runs various scheduled tasks and handles things like picking up emails to send out outside of IIS's scope and the QueueManager. Here's what this looks like in global.asax:public class Global : System.Web.HttpApplication { private static ApplicationScheduler scheduler; private static ServiceLauncher launcher; protected void Application_Start(object sender, EventArgs e) { // Pings the service and ensures it stays alive scheduler = new ApplicationScheduler() { CheckFrequency = 600000 }; scheduler.Start(); launcher = new ServiceLauncher(); launcher.Start(); // register so shutdown is controlled HostingEnvironment.RegisterObject(launcher); }}By keeping these objects around as static instances that are set only once on startup, they survive the lifetime of the application. The code in these classes is essentially unchanged from the Windows Service code except that I could remove the various overrides required for the Windows Service interface (OnStart,OnStop,OnResume etc.). Otherwise the behavior and operation is very similar.In this application ASP.NET serves two purposes: It acts as the host for SignalR and provides the administration interface which allows remote management of the 'service'. I can start and stop the service remotely by shutting down the ApplicationScheduler very easily. I can also very easily feed stats from the queue out directly via a couple of Web requests or (as we do now) through the SignalR service.Registering a Background Object with ASP.NETNotice also the use of the HostingEnvironment.RegisterObject(). This function registers an object with ASP.NET to let it know that it's a background task that should be notified if the AppDomain shuts down. RegisterObject() requires an interface with a Stop() method that's fired and allows your code to respond to a shutdown request. Here's what the IRegisteredObject::Stop() method looks like on the launcher:public void Stop(bool immediate = false) { LogManager.Current.LogInfo("QueueManager Controller Stopped."); Controller.StopProcessing(); Controller.Dispose(); Thread.Sleep(1500); // give background threads some time HostingEnvironment.UnregisterObject(this); }Implementing IRegisterObject should help with reliability on AppDomain shutdowns. Thanks to Justin Van Patten for pointing this out to me on Twitter.RegisterObject() is not required but I would highly recommend implementing it on whatever object controls your background processing to all clean shutdowns when the AppDomain shuts down.Testing it outI'm still in the testing phase with this particular service to see if there are any side effects. But so far it doesn't look like it. With about 50 lines of code I was able to replace the Windows service startup to Web start up - everything else just worked as is. An honorable mention goes to SignalR 2.0's oWin hosting, because with the new oWin based hosting no code changes at all were required, merely a couple of configuration file settings and an assembly directive needed, to point at the SignalR startup class. Sweet!It also seems like SignalR is noticeably faster running inside of IIS compared to self-host. Startup feels faster because of the preload.Starting and Stopping the 'Service'Because the application is running as a Web Server, it's easy to have a Web interface for starting and stopping the services running inside of the service. For our queue manager the SignalR service and front monitoring app has a play and stop button for toggling the queue.If you want more administrative control and have it work more like a Windows Service you can also stop the application pool explicitly from the command line which would be equivalent to stopping and restarting a service.To start and stop from the command line you can use the IIS appCmd tool. To stop:> %windir%\system32\inetsrv\appcmd stop apppool /apppool.name:"Weblog"and to start> %windir%\system32\inetsrv\appcmd start apppool /apppool.name:"Weblog"Note that when you explicitly force the AppPool to stop running either in the UI (on the ApplicationPools page use Start/Stop) or via command line tools, the application pool will not auto-restart immediately. You have to manually start it back up.What's not to like?There are certainly a lot of benefits to running a background service in IIS, but… ASP.NET applications do have more overhead in terms of memory footprint and startup time is a little slower, but generally for server applications this is not a big deal. If the application is stable the service should fire up and stay running indefinitely. A lot of times this kind of service interface can simply be attached to an existing Web application, or if scalability requires be offloaded to its own Web server.Easier to work withBut the ultimate benefit here is that it's much easier to work with a Web app as opposed to a service. While developing I can simply turn off the auto-launch features and launch the service on demand through IIS simply by hitting a page on the site. If I want to shut down an IISRESET -stop will shut down the service easily enough. I can then attach a debugger anywhere I want and this works like any other ASP.NET application. Yes you end up on a background thread for debugging but Visual Studio handles that just fine and if you stay on a single thread this is no different than debugging any other code.SummaryUsing ASP.NET to run background service operations is probably not a super common scenario, but it probably should be something that is considered carefully when building services. Many applications have service like features and with the auto-start functionality of the Application Initialization module, it's easy to build this functionality into ASP.NET. Especially when combined with the notification features of SignalR it becomes very, very easy to create rich services that can also communicate their status easily to the outside world.Whether it's existing applications that need some background processing for scheduling related tasks, or whether you just create a separate site altogether just to host your service it's easy to do and you can leverage the same tool chain you're already using for other Web projects. If you have lots of service projects it's worth considering… give it some thought…© Rick Strahl, West Wind Technologies, 2005-2013Posted in ASP.NET SignalR IIS Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

HTG Reviews the CODE Keyboard: Old School Construction Meets Modern Amenities

- by Jason Fitzpatrick

There’s nothing quite as satisfying as the smooth and crisp action of a well built keyboard. If you’re tired of mushy keys and cheap feeling keyboards, a well-constructed mechanical keyboard is a welcome respite from the $10 keyboard that came with your computer. Read on as we put the CODE mechanical keyboard through the paces. What is the CODE Keyboard? The CODE keyboard is a collaboration between manufacturer WASD Keyboards and Jeff Atwood of Coding Horror (the guy behind the Stack Exchange network and Discourse forum software). Atwood’s focus was incorporating the best of traditional mechanical keyboards and the best of modern keyboard usability improvements. In his own words: The world is awash in terrible, crappy, no name how-cheap-can-we-make-it keyboards. There are a few dozen better mechanical keyboard options out there. I’ve owned and used at least six different expensive mechanical keyboards, but I wasn’t satisfied with any of them, either: they didn’t have backlighting, were ugly, had terrible design, or were missing basic functions like media keys. That’s why I originally contacted Weyman Kwong of WASD Keyboards way back in early 2012. I told him that the state of keyboards was unacceptable to me as a geek, and I proposed a partnership wherein I was willing to work with him to do whatever it takes to produce a truly great mechanical keyboard. Even the ardent skeptic who questions whether Atwood has indeed created a truly great mechanical keyboard certainly can’t argue with the position he starts from: there are so many agonizingly crappy keyboards out there. Even worse, in our opinion, is that unless you’re a typist of a certain vintage there’s a good chance you’ve never actually typed on a really nice keyboard. Those that didn’t start using computers until the mid-to-late 1990s most likely have always typed on modern mushy-key keyboards and never known the joy of typing on a really responsive and crisp mechanical keyboard. Is our preference for and love of mechanical keyboards shining through here? Good. We’re not even going to try and hide it. So where does the CODE keyboard stack up in pantheon of keyboards? Read on as we walk you through the simple setup and our experience using the CODE. Setting Up the CODE Keyboard Although the setup of the CODE keyboard is essentially plug and play, there are two distinct setup steps that you likely haven’t had to perform on a previous keyboard. Both highlight the degree of care put into the keyboard and the amount of customization available. Inside the box you’ll find the keyboard, a micro USB cable, a USB-to-PS2 adapter, and a tool which you may be unfamiliar with: a key puller. We’ll return to the key puller in a moment. Unlike the majority of keyboards on the market, the cord isn’t permanently affixed to the keyboard. What does this mean for you? Aside from the obvious need to plug it in yourself, it makes it dead simple to repair your own keyboard cord if it gets attacked by a pet, mangled in a mechanism on your desk, or otherwise damaged. It also makes it easy to take advantage of the cable routing channels in on the underside of the keyboard to route your cable exactly where you want it. While we’re staring at the underside of the keyboard, check out those beefy rubber feet. By peripherals standards they’re huge (and there is six instead of the usual four). Once you plunk the keyboard down where you want it, it might as well be glued down the rubber feet work so well. After you’ve secured the cable and adjusted it to your liking, there is one more task before plug the keyboard into the computer. On the bottom left-hand side of the keyboard, you’ll find a small recess in the plastic with some dip switches inside: The dip switches are there to switch hardware functions for various operating systems, keyboard layouts, and to enable/disable function keys. By toggling the dip switches you can change the keyboard from QWERTY mode to Dvorak mode and Colemak mode, the two most popular alternative keyboard configurations. You can also use the switches to enable Mac-functionality (for Command/Option keys). One of our favorite little toggles is the SW3 dip switch: you can disable the Caps Lock key; goodbye accidentally pressing Caps when you mean to press Shift. You can review the entire dip switch configuration chart here. The quick-start for Windows users is simple: double check that all the switches are in the off position (as seen in the photo above) and then simply toggle SW6 on to enable the media and backlighting function keys (this turns the menu key on the keyboard into a function key as typically found on laptop keyboards). After adjusting the dip switches to your liking, plug the keyboard into an open USB port on your computer (or into your PS/2 port using the included adapter). Design, Layout, and Backlighting The CODE keyboard comes in two flavors, a traditional 87-key layout (no number pad) and a traditional 104-key layout (number pad on the right hand side). We identify the layout as traditional because, despite some modern trapping and sneaky shortcuts, the actual form factor of the keyboard from the shape of the keys to the spacing and position is as classic as it comes. You won’t have to learn a new keyboard layout and spend weeks conditioning yourself to a smaller than normal backspace key or a PgUp/PgDn pair in an unconventional location. Just because the keyboard is very conventional in layout, however, doesn’t mean you’ll be missing modern amenities like media-control keys. The following additional functions are hidden in the F11, F12, Pause button, and the 2×6 grid formed by the Insert and Delete rows: keyboard illumination brightness, keyboard illumination on/off, mute, and then the typical play/pause, forward/backward, stop, and volume +/- in Insert and Delete rows, respectively. While we weren’t sure what we’d think of the function-key system at first (especially after retiring a Microsoft Sidewinder keyboard with a huge and easily accessible volume knob on it), it took less than a day for us to adapt to using the Fn key, located next to the right Ctrl key, to adjust our media playback on the fly. Keyboard backlighting is a largely hit-or-miss undertaking but the CODE keyboard nails it. Not only does it have pleasant and easily adjustable through-the-keys lighting but the key switches the keys themselves are attached to are mounted to a steel plate with white paint. Enough of the light reflects off the interior cavity of the keys and then diffuses across the white plate to provide nice even illumination in between the keys. Highlighting the steel plate beneath the keys brings us to the actual construction of the keyboard. It’s rock solid. The 87-key model, the one we tested, is 2.0 pounds. The 104-key is nearly a half pound heavier at 2.42 pounds. Between the steel plate, the extra-thick PCB board beneath the steel plate, and the thick ABS plastic housing, the keyboard has very solid feel to it. Combine that heft with the previously mentioned thick rubber feet and you have a tank-like keyboard that won’t budge a millimeter during normal use. Examining The Keys This is the section of the review the hardcore typists and keyboard ninjas have been waiting for. We’ve looked at the layout of the keyboard, we’ve looked at the general construction of it, but what about the actual keys? There are a wide variety of keyboard construction techniques but the vast majority of modern keyboards use a rubber-dome construction. The key is floated in a plastic frame over a rubber membrane that has a little rubber dome for each key. The press of the physical key compresses the rubber dome downwards and a little bit of conductive material on the inside of the dome’s apex connects with the circuit board. Despite the near ubiquity of the design, many people dislike it. The principal complaint is that dome keyboards require a complete compression to register a keystroke; keyboard designers and enthusiasts refer to this as “bottoming out”. In other words, the register the “b” key, you need to completely press that key down. As such it slows you down and requires additional pressure and movement that, over the course of tens of thousands of keystrokes, adds up to a whole lot of wasted time and fatigue. The CODE keyboard features key switches manufactured by Cherry, a company that has manufactured key switches since the 1960s. Specifically the CODE features Cherry MX Clear switches. These switches feature the same classic design of the other Cherry switches (such as the MX Blue and Brown switch lineups) but they are significantly quieter (yes this is a mechanical keyboard, but no, your neighbors won’t think you’re firing off a machine gun) as they lack the audible click found in most Cherry switches. This isn’t to say that they keyboard doesn’t have a nice audible key press sound when the key is fully depressed, but that the key mechanism isn’t doesn’t create a loud click sound when triggered. One of the great features of the Cherry MX clear is a tactile “bump” that indicates the key has been compressed enough to register the stroke. For touch typists the very subtle tactile feedback is a great indicator that you can move on to the next stroke and provides a welcome speed boost. Even if you’re not trying to break any word-per-minute records, that little bump when pressing the key is satisfying. The Cherry key switches, in addition to providing a much more pleasant typing experience, are also significantly more durable than dome-style key switch. Rubber dome switch membrane keyboards are typically rated for 5-10 million contacts whereas the Cherry mechanical switches are rated for 50 million contacts. You’d have to write the next War and Peace and follow that up with A Tale of Two Cities: Zombie Edition, and then turn around and transcribe them both into a dozen different languages to even begin putting a tiny dent in the lifecycle of this keyboard. So what do the switches look like under the classicly styled keys? You can take a look yourself with the included key puller. Slide the loop between the keys and then gently beneath the key you wish to remove: Wiggle the key puller gently back and forth while exerting a gentle upward pressure to pop the key off; You can repeat the process for every key, if you ever find yourself needing to extract piles of cat hair, Cheeto dust, or other foreign objects from your keyboard. There it is, the naked switch, the source of that wonderful crisp action with the tactile bump on each keystroke. The last feature worthy of a mention is the N-key rollover functionality of the keyboard. This is a feature you simply won’t find on non-mechanical keyboards and even gaming keyboards typically only have any sort of key roller on the high-frequency keys like WASD. So what is N-key rollover and why do you care? On a typical mass-produced rubber-dome keyboard you cannot simultaneously press more than two keys as the third one doesn’t register. PS/2 keyboards allow for unlimited rollover (in other words you can’t out type the keyboard as all of your keystrokes, no matter how fast, will register); if you use the CODE keyboard with the PS/2 adapter you gain this ability. If you don’t use the PS/2 adapter and use the native USB, you still get 6-key rollover (and the CTRL, ALT, and SHIFT don’t count towards the 6) so realistically you still won’t be able to out type the computer as even the more finger twisting keyboard combos and high speed typing will still fall well within the 6-key rollover. The rollover absolutely doesn’t matter if you’re a slow hunt-and-peck typist, but if you’ve read this far into a keyboard review there’s a good chance that you’re a serious typist and that kind of quality construction and high-number key rollover is a fantastic feature. The Good, The Bad, and the Verdict We’ve put the CODE keyboard through the paces, we’ve played games with it, typed articles with it, left lengthy comments on Reddit, and otherwise used and abused it like we would any other keyboard. The Good: The construction is rock solid. In an emergency, we’re confident we could use the keyboard as a blunt weapon (and then resume using it later in the day with no ill effect on the keyboard). The Cherry switches are an absolute pleasure to type on; the Clear variety found in the CODE keyboard offer a really nice middle-ground between the gun-shot clack of a louder mechanical switch and the quietness of a lesser-quality dome keyboard without sacrificing quality. Touch typists will love the subtle tactile bump feedback. Dip switch system makes it very easy for users on different systems and with different keyboard layout needs to switch between operating system and keyboard layouts. If you’re investing a chunk of change in a keyboard it’s nice to know you can take it with you to a different operating system or “upgrade” it to a new layout if you decide to take up Dvorak-style typing. The backlighting is perfect. You can adjust it from a barely-visible glow to a blazing light-up-the-room brightness. Whatever your intesity preference, the white-coated steel backplate does a great job diffusing the light between the keys. You can easily remove the keys for cleaning (or to rearrange the letters to support a new keyboard layout). The weight of the unit combined with the extra thick rubber feet keep it planted exactly where you place it on the desk. The Bad: While you’re getting your money’s worth, the $150 price tag is a shock when compared to the $20-60 price tags you find on lower-end keyboards. People used to large dedicated media keys independent of the traditional key layout (such as the large buttons and volume controls found on many modern keyboards) might be off put by the Fn-key style media controls on the CODE. The Verdict: The keyboard is clearly and heavily influenced by the needs of serious typists. Whether you’re a programmer, transcriptionist, or just somebody that wants to leave the lengthiest article comments the Internet has ever seen, the CODE keyboard offers a rock solid typing experience. Yes, $150 isn’t pocket change, but the quality of the CODE keyboard is so high and the typing experience is so enjoyable, you’re easily getting ten times the value you’d get out of purchasing a lesser keyboard. Even compared to other mechanical keyboards on the market, like the Das Keyboard, you’re still getting more for your money as other mechanical keyboards don’t come with the lovely-to-type-on Cherry MX Clear switches, back lighting, and hardware-based operating system keyboard layout switching. If it’s in your budget to upgrade your keyboard (especially if you’ve been slogging along with a low-end rubber-dome keyboard) there’s no good reason to not pickup a CODE keyboard. Key animation courtesy of Geekhack.org user Lethal Squirrel.

Read the article

Rendering ASP.NET MVC Views to String

- by Rick Strahl

It's not uncommon in my applications that I require longish text output that does not have to be rendered into the HTTP output stream. The most common scenario I have for 'template driven' non-Web text is for emails of all sorts. Logon confirmations and verifications, email confirmations for things like orders, status updates or scheduler notifications - all of which require merged text output both within and sometimes outside of Web applications. On other occasions I also need to capture the output from certain views for logging purposes. Rather than creating text output in code, it's much nicer to use the rendering mechanism that ASP.NET MVC already provides by way of it's ViewEngines - using Razor or WebForms views - to render output to a string. This is nice because it uses the same familiar rendering mechanism that I already use for my HTTP output and it also solves the problem of where to store the templates for rendering this content in nothing more than perhaps a separate view folder. The good news is that ASP.NET MVC's rendering engine is much more modular than the full ASP.NET runtime engine which was a real pain in the butt to coerce into rendering output to string. With MVC the rendering engine has been separated out from core ASP.NET runtime, so it's actually a lot easier to get View output into a string. Getting View Output from within an MVC Application If you need to generate string output from an MVC and pass some model data to it, the process to capture this output is fairly straight forward and involves only a handful of lines of code. The catch is that this particular approach requires that you have an active ControllerContext that can be passed to the view. This means that the following approach is limited to access from within Controller methods. Here's a class that wraps the process and provides both instance and static methods to handle the rendering:/// <summary> /// Class that renders MVC views to a string using the /// standard MVC View Engine to render the view. /// /// Note: This class can only be used within MVC /// applications that have an active ControllerContext. /// </summary> public class ViewRenderer { /// <summary> /// Required Controller Context /// </summary> protected ControllerContext Context { get; set; } public ViewRenderer(ControllerContext controllerContext) { Context = controllerContext; } /// <summary> /// Renders a full MVC view to a string. Will render with the full MVC /// View engine including running _ViewStart and merging into _Layout /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to render the view with</param> /// <returns>String of the rendered view or null on error</returns> public string RenderView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, false); } /// <summary> /// Renders a partial MVC view to string. Use this method to render /// a partial view that doesn't merge with _Layout and doesn't fire /// _ViewStart. /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to pass to the viewRenderer</param> /// <returns>String of the rendered view or null on error</returns> public string RenderPartialView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, true); } public static string RenderView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderView(viewPath, model); } public static string RenderPartialView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderPartialView(viewPath, model); } protected string RenderViewToStringInternal(string viewPath, object model, bool partial = false) { // first find the ViewEngine for this view ViewEngineResult viewEngineResult = null; if (partial) viewEngineResult = ViewEngines.Engines.FindPartialView(Context, viewPath); else viewEngineResult = ViewEngines.Engines.FindView(Context, viewPath, null); if (viewEngineResult == null) throw new FileNotFoundException(Properties.Resources.ViewCouldNotBeFound); // get the view and attach the model to view data var view = viewEngineResult.View; Context.Controller.ViewData.Model = model; string result = null; using (var sw = new StringWriter()) { var ctx = new ViewContext(Context, view, Context.Controller.ViewData, Context.Controller.TempData, sw); view.Render(ctx, sw); result = sw.ToString(); } return result; } } The key is the RenderViewToStringInternal method. The method first tries to find the view to render based on its path which can either be in the current controller's view path or the shared view path using its simple name (PasswordRecovery) or alternately by its full virtual path (~/Views/Templates/PasswordRecovery.cshtml). This code should work both for Razor and WebForms views although I've only tried it with Razor Views. Note that WebForms Views might actually be better for plain text as Razor adds all sorts of white space into its output when there are code blocks in the template. The Web Forms engine provides more accurate rendering for raw text scenarios. Once a view engine is found the view to render can be retrieved. Views in MVC render based on data that comes off the controller like the ViewData which contains the model along with the actual ViewData and ViewBag. From the View and some of the Context data a ViewContext is created which is then used to render the view with. The View picks up the Model and other data from the ViewContext internally and processes the View the same it would be processed if it were to send its output into the HTTP output stream. The difference is that we can override the ViewContext's output stream which we provide and capture into a StringWriter(). After rendering completes the result holds the output string. If an error occurs the error behavior is similar what you see with regular MVC errors - you get a full yellow screen of death including the view error information with the line of error highlighted. It's your responsibility to handle the error - or let it bubble up to your regular Controller Error filter if you have one. To use the simple class you only need a single line of code if you call the static methods. Here's an example of some Controller code that is used to send a user notification to a customer via email in one of my applications:[HttpPost] public ActionResult ContactSeller(ContactSellerViewModel model) { InitializeViewModel(model); var entryBus = new busEntry(); var entry = entryBus.LoadByDisplayId(model.EntryId); if ( string.IsNullOrEmpty(model.Email) ) entryBus.ValidationErrors.Add("Email address can't be empty.","Email"); if ( string.IsNullOrEmpty(model.Message)) entryBus.ValidationErrors.Add("Message can't be empty.","Message"); model.EntryId = entry.DisplayId; model.EntryTitle = entry.Title; if (entryBus.ValidationErrors.Count > 0) { ErrorDisplay.AddMessages(entryBus.ValidationErrors); ErrorDisplay.ShowError("Please correct the following:"); } else { string message = ViewRenderer.RenderView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); string title = entry.Title + " (" + entry.DisplayId + ") - " + App.Configuration.ApplicationName; AppUtils.SendEmail(title, message, model.Email, entry.User.Email, false, false)) } return View(model); } Simple! The view in this case is just a plain MVC view and in this case it's a very simple plain text email message (edited for brevity here) that is created and sent off:@model ContactSellerViewModel @{ Layout = null; }re: @Model.EntryTitle @Model.ListingUrl @Model.Message ** SECURITY ADVISORY - AVOID SCAMS ** Avoid: wiring money, cross-border deals, work-at-home ** Beware: cashier checks, money orders, escrow, shipping ** More Info: @(App.Configuration.ApplicationBaseUrl)scams.html Obviously this is a very simple view (I edited out more from this page to keep it brief) - but other template views are much more complex HTML documents or long messages that are occasionally updated and they are a perfect fit for Razor rendering. It even works with nested partial views and _layout pages. Partial Rendering Notice that I'm rendering a full View here. In the view I explicitly set the Layout=null to avoid pulling in _layout.cshtml for this view. This can also be controlled externally by calling the RenderPartial method instead: string message = ViewRenderer.RenderPartialView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); with this line of code no layout page (or _viewstart) will be loaded, so the output generated is just what's in the view. I find myself using Partials most of the time when rendering templates, since the target of templates usually tend to be emails or other HTML fragment like output, so the RenderPartialView() method is definitely useful to me. Rendering without a ControllerContext The preceding class is great when you're need template rendering from within MVC controller actions or anywhere where you have access to the request Controller. But if you don't have a controller context handy - maybe inside a utility function that is static, a non-Web application, or an operation that runs asynchronously in ASP.NET - which makes using the above code impossible. I haven't found a way to manually create a Controller context to provide the ViewContext() what it needs from outside of the MVC infrastructure. However, there are ways to accomplish this, but they are a bit more complex. It's possible to host the RazorEngine on your own, which side steps all of the MVC framework and HTTP and just deals with the raw rendering engine. I wrote about this process in Hosting the Razor Engine in Non-Web Applications a long while back. It's quite a process to create a custom Razor engine and runtime, but it allows for all sorts of flexibility. There's also a RazorEngine CodePlex project that does something similar. I've been meaning to check out the latter but haven't gotten around to it since I have my own code to do this. The trick to hosting the RazorEngine to have it behave properly inside of an ASP.NET application and properly cache content so templates aren't constantly rebuild and reparsed. Anyway, in the same app as above I have one scenario where no ControllerContext is available: I have a background scheduler running inside of the app that fires on timed intervals. This process could be external but because it's lightweight we decided to fire it right inside of the ASP.NET app on a separate thread. In my app the code that renders these templates does something like this:var model = new SearchNotificationViewModel() { Entries = entries, Notification = notification, User = user }; // TODO: Need logging for errors sending string razorError = null; var result = AppUtils.RenderRazorTemplate("~/views/template/SearchNotificationTemplate.cshtml", model, razorError); which references a couple of helper functions that set up my RazorFolderHostContainer class:public static string RenderRazorTemplate(string virtualPath, object model,string errorMessage = null) { var razor = AppUtils.CreateRazorHost(); var path = virtualPath.Replace("~/", "").Replace("~", "").Replace("/", "\\"); var merged = razor.RenderTemplateToString(path, model); if (merged == null) errorMessage = razor.ErrorMessage; return merged; } /// <summary> /// Creates a RazorStringHostContainer and starts it /// Call .Stop() when you're done with it. /// /// This is a static instance /// </summary> /// <param name="virtualPath"></param> /// <param name="binBasePath"></param> /// <param name="forceLoad"></param> /// <returns></returns> public static RazorFolderHostContainer CreateRazorHost(string binBasePath = null, bool forceLoad = false) { if (binBasePath == null) { if (HttpContext.Current != null) binBasePath = HttpContext.Current.Server.MapPath("~/"); else binBasePath = AppDomain.CurrentDomain.BaseDirectory; } if (_RazorHost == null || forceLoad) { if (!binBasePath.EndsWith("\\")) binBasePath += "\\"; //var razor = new RazorStringHostContainer(); var razor = new RazorFolderHostContainer(); razor.TemplatePath = binBasePath; binBasePath += "bin\\"; razor.BaseBinaryFolder = binBasePath; razor.UseAppDomain = false; razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsBusiness.dll"); razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsWeb.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Utilities.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.Mvc.dll"); razor.ReferencedAssemblies.Add("System.Web.dll"); razor.ReferencedNamespaces.Add("System.Web"); razor.ReferencedNamespaces.Add("ClassifiedsBusiness"); razor.ReferencedNamespaces.Add("ClassifiedsWeb"); razor.ReferencedNamespaces.Add("Westwind.Web"); razor.ReferencedNamespaces.Add("Westwind.Utilities"); _RazorHost = razor; _RazorHost.Start(); //_RazorHost.Engine.Configuration.CompileToMemory = false; } return _RazorHost; } The RazorFolderHostContainer essentially is a full runtime that mimics a folder structure like a typical Web app does including caching semantics and compiling code only if code changes on disk. It maps a folder hierarchy to views using the ~/ path syntax. The host is then configured to add assemblies and namespaces. Unfortunately the engine is not exactly like MVC's Razor - the expression expansion and code execution are the same, but some of the support methods like sections, helpers etc. are not all there so templates have to be a bit simpler. There are other folder hosts provided as well to directly execute templates from strings (using RazorStringHostContainer). The following is an example of an HTML email template @inherits RazorHosting.RazorTemplateFolderHost <ClassifiedsWeb.SearchNotificationViewModel> <html> <head> <title>Search Notifications</title> <style> body { margin: 5px;font-family: Verdana, Arial; font-size: 10pt;} h3 { color: SteelBlue; } .entry-item { border-bottom: 1px solid grey; padding: 8px; margin-bottom: 5px; } </style> </head> <body> Hello @Model.User.Name,<br /> <p>Below are your Search Results for the search phrase:</p> <h3>@Model.Notification.SearchPhrase</h3> <small>since @TimeUtils.ShortDateString(Model.Notification.LastSearch)</small> <hr /> You can see that the syntax is a little different. Instead of the familiar @model header the raw Razor @inherits tag is used to specify the template base class (which you can extend). I took a quick look through the feature set of RazorEngine on CodePlex (now Github I guess) and the template implementation they use is closer to MVC's razor but there are other differences. In the end don't expect exact behavior like MVC templates if you use an external Razor rendering engine. This is not what I would consider an ideal solution, but it works well enough for this project. My biggest concern is the overhead of hosting a second razor engine in a Web app and the fact that here the differences in template rendering between 'real' MVC Razor views and another RazorEngine really are noticeable. You win some, you lose some It's extremely nice to see that if you have a ControllerContext handy (which probably addresses 99% of Web app scenarios) rendering a view to string using the native MVC Razor engine is pretty simple. Kudos on making that happen - as it solves a problem I see in just about every Web application I work on. But it is a bummer that a ControllerContext is required to make this simple code work. It'd be really sweet if there was a way to render views without being so closely coupled to the ASP.NET or MVC infrastructure that requires a ControllerContext. Alternately it'd be nice to have a way for an MVC based application to create a minimal ControllerContext from scratch - maybe somebody's been down that path. I tried for a few hours to come up with a way to make that work but gave up in the soup of nested contexts (MVC/Controller/View/Http). I suspect going down this path would be similar to hosting the ASP.NET runtime requiring a WorkerRequest. Brrr…. The sad part is that it seems to me that a View should really not require much 'context' of any kind to render output to string. Yes there are a few things that clearly are required like paths to the virtual and possibly the disk paths to the root of the app, but beyond that view rendering should not require much. But, no such luck. For now custom RazorHosting seems to be the only way to make Razor rendering go outside of the MVC context… Resources Full ViewRenderer.cs source code from Westwind.Web.Mvc library Hosting the Razor Engine for Non-Web Applications RazorEngine on GitHub© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET ASP.NET MVC Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

IIS SSL Certificate Renewal Pain

- by Rick Strahl

I’m in the middle of my annual certificate renewal for the West Wind site and I can honestly say that I hate IIS’s certificate system. When it works it’s fine, but when it doesn’t man can it be a pain. Because I deal with public certificates on my site merely once a year, and you have to perform the certificate dance just the right way, I seem to run into some sort of trouble every year, thinking that Microsoft surely must have addressed the issues I ran into previously – HA! Not so. Don’t ever use the Renew Certificate Feature in IIS! The first rule that I should have never forgotten is that certificate renewals in IIS (7 is what I’m using but I think it’s no different in 7.5 and 8), simply don’t work if you’re submitting to get a public certificate from a certificate authority. I use DNSimple for my DNS domain management and SSL certificates because they provide ridiculously easy domain management and good prices for SSL certs – especially wildcard certificates, which is what I use on west-wind.com. Certificates in IIS can be found pegged to the machine root. If you go into the IIS Manager, go to the machine root the tree and then click on certificates and you then get various certificate options: Both of these options create a new Certificate request (CSR), which is just a text file. But if you’re silly enough like me to click on the Renew button on your old certificate, you’ll find that you end up generating a very long Certificate Request that looks nothing like the original certificate request and the format that’s used for this is not accepted by most certificate authorities. While I’m not sure exactly what the problem is, it simply looks like IIS is respecting none of your original certificate bit size choices and is generating a huge certificate request that is 3 times the size of a ‘normal’ certificate request. The end result is (and I’ve done this at least twice now) is that the certificate processor is likely to fail processing those renewals. Always create a new Certificate While it’s a little more work and you have to remember how to fill out the certificate request properly, this is the safe way to make sure your certificate generates properly. First comes the Distinguished Name Properties dialog: Ah yes you have to love the nomenclature of this stuff. Distinguished name, Common name – WTF is a common name? It doesn’t look common to me! Make sure this form gets filled out correctly. Common NameThis is the domain name of the Web site. In my case I’m creating a wildcard certificate so I’m using the * prefix. If you’re purchasing a certificate for a specific domain use www.west-wind.com or store.west-wind.com for example. Make sure this matches the EXACT domain you’re trying to use secure access on because that’s all the certificate is going to work on unless you get a wildcard certificate. Organization Is the name of your company or organization. Depending on the kind of certificate you purchase this name will show up on your certificate. Most low end SSL certificates (ie. those that cost under $100 for single domains) don’t list the organization, the higher signature certificates that also require extensive validation by the cert authority do. Regardless you should make sure this matches the right company/organization. Organizational Unit This can be anything. Not really sure what this is for, but traditionally I’ve always set this to Web because – well this is a Web thing after all right? I’ve never seen this used anywhere that I can tell other than to internally reference the cert. State and CountryPretty obvious. Should reflect the location of the business/organization/person or site. Next you have to configure the bit size used for the certificate: The default on this dialog is 1024, but I’ve found that most providers these days request a minimum bit length of 2048, as did my DNSimple provider. Again check with the provider when you submit to make sure. Bit length mismatches can cause problems if you use a size that isn’t supported by the provider. I had that happen last year when I submitted my CSR and it got rejected quite a bit later, when the certs usually are issued within an hour or less. When you’re done here, the certificate is saved to disk as a .txt file and it should look something like this (this is a 2048 bit length CSR):-----BEGIN NEW CERTIFICATE REQUEST----- MIIEVGCCAz0CAQAwdjELMAkGA1UEBhMCVVMxDzANBgNVBAgMBkhhd2FpaTENMAsG A1UEBwwEUGFpYTEfMB0GA1UECgwWV2VzdCBXaW5kIFRlY2hub2xvZ2llczEMMAoG B1UECwwDV2ViMRgwFgYDVQQDDA8qLndlc3Qtd2luZC5jb20wggEiMA0GCSqGSIb3 DQEBAQUAA4IBDwAwggEKAoIBAQDIPWOFMkMVRp2Ftj9w/cCVV4OYYhoZYtl+8lTk oqDwKca0xWHLgioX/9v0rZLS6a82MHqKEBxVXu+cuCmSE4AQtB/1YH9lS4tpc/be OZDvnTotP6l4MCEzzAfROcw4CiIg6X0RMSnl8IATAvv2V5LQM9TDdt9oDdMpX2IY +vVC9RZ7PMHBmR9kwI2i/lrKitzhQKaHgpmKcRlM6iqpALUiX28w5HJaDKK1MDHN 607tyFJLHijuJKx7PdTqZYf50KkC3NupfZ2avVycf18Q13jHWj59tvwEOczoVzRL l4LQivAqbhyiqMpWnrZunIOUZta5aGm+jo7O1knGWJjxuraTAgMBAAGgggGYMBoG CisGAQQBgjcNAgMxDBYKNi4yLjkyMDAuMjA0BgkrBgEEAYI3FRQxJzAlAgEFDAZS QVNYUFMMC1JBU1hQU1xSaWNrDAtJbmV0TWdyLmV4ZTByBgorBgEEAYI3DQICMWQw YgIBAR5aAE0AaQBjAHIAbwBzAG8AZgB0ACAAUgBTAEEAIABTAEMAaABhAG4AbgBl AGwAIABDAHIAeQBwAHQAbwBnAHIAYQBwAGgAaQBjACAAUAByAG8AdgBpAGQAZQBy AwEAMIHPBgkqhkiG9w0BCQ4xgcEwgb4wDgYDVR0PAQH/BAQDAgTwMBMGA1UdJQQM MAoGCCsGAQUFBwMBMHgGCSqGSIb3DQEJDwRrMGkwDgYIKoZIhvcNAwICAgCAMA4G CCqGSIb3DQMEAgIAgDALBglghkgBZQMEASowCwYJYIZIAWUDBAEtMAsGCWCGSAFl AwQBAjALBglghkgBZQMEAQUwBwYFKw4DAgcwCgYIKoZIhvcNAwcwHQYDVR0OBBYE FD/yOsTbXE+GVFCFMmldzQvyloz9MA0GCSqGSIb3DQEBBQUAA4IBAQCK6LlsCuIM 1AU0niB6QZ9v0FTsGFxP1dYvVUnJyY6VEKNiGFiQjZac7UCs0p58yScdXWEFOE8V OsjAYD3xYNc05+ckyD67UHRGEUAVB9RBvbKW23KeR/8kBmEzc8PemD52YOgExxAJ 57xWmAwEHAvbgYzQvhO8AOzH3TGvvHbg5UKM1pYgNmuwZq5DkL/IDoeIJwfk/wrI wghNTuxxIFgbH4YrgLgv4PRvrS/LaTCRBdboaCgzATMczaOb1nd/DVNR+3fCtMhM W0psTAjzRbmXF3nJyAQa7jF/52gkY0RfFX2lG5tJnG+XDsVNvKNvh9Qa5Tlmkm06 ILKCm9ciWCKk -----END NEW CERTIFICATE REQUEST----- You can take that certificate request and submit that to your certificate provider. Since this is base64 encoded you can typically just paste it into a text box on the submission page, or some providers will ask you to upload the CSR as a file. What does a Renewal look like? Note the length of the CSR will vary somewhat with key strength, but compare this to a renewal request that IIS generated from my existing site:-----BEGIN NEW CERTIFICATE REQUEST----- MIIPpwYFKoZIhvcNAQcCoIIPmDCCD5QCAQExCzAJBgUrDgMCGgUAMIIIqAYJKoZI hvcNAQcBoIIImQSCCJUwggiRMIIH+gIBADBdMSEwHwYDVQQLDBhEb21haW4gQ29u dHJvbCBWYWxpFGF0ZWQxHjAcBgNVBAsMFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEY MBYGA1UEAwwPKi53ZXN0LXdpbmQuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQCK4OuIOR18Wb8tNMGRZiD1c9X57b332Lj7DhbckFqLs0ys8kVDHrTXSj+T Ye9nmAvfPpZmBtE5p9qRNN79rUYugAdl+qEtE4IJe1bRfxXzcKa1SXa8+TEs3zQa zYSmcR2dDuC8om1eAdeCtt0NnkvANgm1VLwGOor/UHMASaEhCQIDAQABoIIG8jAa BgorBgEEAYI3DQIDMQwWCjYuMi45MjAwLjIwNAYJKwYBBAGCNxUUMScwJQIBBQwG UkFTWFBTDAtSQVNYUFNcUmljawwLSW5ldE1nci5leGUwZgYKKwYBBAGCNw0CAjFY MFYCAQIeTgBNAGkAYwByAG8AcwBvAGYAdAAgAFMAdAByAG8AbgBnACAAQwByAHkA cAB0AG8AZwByAGEAcABoAGkAYwAgAFAAcgBvAHYAaQBkAGUAcgMBADCCAQAGCSqG SIb3DQEJDjGB8jCB7zAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIwADA0BgNV HSUELTArBggrBgEFBQcDAQYIKwYBBQUHAwIGCisGAQQBgjcKAwMGCWCGSAGG+EIE ATBPBgNVHSAESDBGMDoGCysGAQQBsjEBAgIHMCswKQYIKwYBBQUHAgEWHWh0dHBz Oi8vc2VjdXJlLmNvbW9kby5jb20vQ1BTMAgGBmeBDAECATApBgNVHREEIjAggg8q Lndlc3Qtd2luZC5jb22CDXdlc3Qtd2luZC5jb20wHQYDVR0OBBYEFEVLAyO8gDiv lsfovKrx9mHPyrsiMIIFMAYJKwYBBAGCNw0BMYIFITCCBR0wggQFoAMCAQICEQDu 1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRsw GQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAY BgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wg Q0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUwNjA2MjM1OTU5WjBdMSEwHwYDVQQLExhE b21haW4gQ29udHJvbCBWYWxpZGF0ZWQxHjAcBgNVBAsTFUVzc2VudGlhbFNTTCBX aWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0LXdpbmQuY29tMIIBIjANBgkqhkiG9w0B AQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66XB51DlUfm6xXqJBcvMU2qorRHxC+WjEpB amvg8XoqNfCKzDAvLMbY4BLhbYCTagqtslnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJM CHufZ5RDtuTuxhTdJxzP9YqZUfKV5abWQp/TK6V1ryaBJvdqM73q4tRjrQODtkiR PfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8 UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+wDNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfO a7iZMVGbqDg6rkS//2uGe6tSQJTTs+mAZB+na+M8XT2UqwIDAQABo4IBwTCCAb0w HwYDVR0jBBgwFoAU2svqrVsIXcz//CZUzknlVcY49PgwHQYDVR0OBBYEFH0AmLiL RSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB/wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQG A1UdJQQtMCsGCCsGAQUFBwMBBggrBgEFBQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4 QgQBME8GA1UdIARIMEYwOgYLKwYBBAGyMQECAgcwKzApBggrBgEFBQcCARYdaHR0 cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9DUFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIw MKAuoCyGKmh0dHA6Ly9jcmwuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBLmNy bDBuBggrBgEFBQcBAQRiMGAwOAYIKwYBBQUHMAKGLGh0dHA6Ly9jcnQuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBXzIuY3J0MCQGCCsGAQUFBzABhhhodHRwOi8v b2NzcC5jb21vZG9jYS5jb20wKQYDVR0RBCIwIIIPKi53ZXN0LXdpbmQuY29tgg13 ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEBBQUAA4IBAQBqBfd6QHrxXsfgfKARG6np 8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8 YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXSsBxBdNz8RYTthPMu1h09C0XuDB30sztg nR692FrxJN5/bXsk+MC9nEweTFW/t2HW+XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lD csZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0tCbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk 9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlcrfFP2PK7XcEwWizsvMrNqLyvQVNXSUPT MA0GCSqGSIb3DQEBBQUAA4GBABt/NitwMzc5t22p5+zy4HXbVYzLEjesLH8/v0ot uLQ3kkG8tIWNh5RplxIxtilXt09H4Oxpo3fKUN0yw+E6WsBfg0sAF8pHNBdOJi48 azrQbt4HvKktQkGpgYFjLsormjF44SRtToLHlYycDHBNvjaBClUwMCq8HnwY6vDq xikRoIIFITCCBR0wggQFoAMCAQICEQDu1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3 DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0 ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVk MRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wgQ0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUw NjA2MjM1OTU5WjBdMSEwHwYDVQQLExhEb21haW4gQ29udHJvbCBWYWxpZGF0ZWQx HjAcBgNVBAsTFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0 LXdpbmQuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66X B51DlUfm6xXqJBcvMU2qorRHxC+WjEpBamvg8XoqNfCKzDAvLMbY4BLhbYCTagqt slnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJMCHufZ5RDtuTuxhTdJxzP9YqZUfKV5abW Qp/TK6V1ryaBJvdqM73q4tRjrQODtkiRPfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d 9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+w DNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfOa7iZMVGbqDg6rkS//2uGe6tSQJTTs+mA ZB+na+M8XT2UqwIDAQABo4IBwTCCAb0wHwYDVR0jBBgwFoAU2svqrVsIXcz//CZU zknlVcY49PgwHQYDVR0OBBYEFH0AmLiLRSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB /wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQGA1UdJQQtMCsGCCsGAQUFBwMBBggrBgEF BQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4QgQBME8GA1UdIARIMEYwOgYLKwYBBAGy MQECAgcwKzApBggrBgEFBQcCARYdaHR0cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9D UFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIwMKAuoCyGKmh0dHA6Ly9jcmwuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBLmNybDBuBggrBgEFBQcBAQRiMGAwOAYIKwYB BQUHMAKGLGh0dHA6Ly9jcnQuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBXzIu Y3J0MCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5jb21vZG9jYS5jb20wKQYDVR0R BCIwIIIPKi53ZXN0LXdpbmQuY29tgg13ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEB BQUAA4IBAQBqBfd6QHrxXsfgfKARG6np8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe 4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXS sBxBdNz8RYTthPMu1h09C0XuDB30sztgnR692FrxJN5/bXsk+MC9nEweTFW/t2HW +XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lDcsZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0t CbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlc rfFP2PK7XcEwWizsvMrNqLyvQVNXSUPTMYIBrzCCAasCAQEwgYcwcjELMAkGA1UE BhMCR0IxGzAZBgNVBAgTEkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4GA1UEBxMHU2Fs Zm9yZDEaMBgGA1UEChMRQ09NT0RPIENBIExpbWl0ZWQxGDAWBgNVBAMTD0Vzc2Vu dGlhbFNTTCBDQQIRAO7UTVPkm+2Sbks59IdptaUwCQYFKw4DAhoFADANBgkqhkiG 9w0BAQEFAASCAQB8PNQ6bYnQpWfkHyxnDuvNKw3wrqF2p7JMZm+SuN2qp3R2LpCR mW2LrGtQIm9Iob/QOYH+8houYNVdvsATGPXX2T8gzn+anof4tOG0vCTK1Bp9bwf9 MkRP+1c8RW/vkYmUW4X5/C+y3CZpMH5dDTaXBIpXFzjX/fxNpH/rvLzGiaYYL3Cn OLO+aOADr9qq5yoqwpiYCSfYNNYKTUNNGfYIidQwYtbHXEYhSukB2oR89xD2sZZ4 bOqFjUPgTa5SsERLDDeg3omMKiIXVYGxlqBEq51Kge6IQt4qQV9P9VgInW7cWmKe dTqNHI9ri3ttewdEnT++TKGKKfTjX9SR8Waj -----END NEW CERTIFICATE REQUEST----- Clearly there’s something very different between this an my original request! And it didn’t work. IIS creates a custom CSR that is encoded in a format that no certificate authority I’ve ever used uses. If you want the gory details of what’s in there look at this ServerFault question (thanks to Mika in the comments). In the end it doesn’t matter though – no certificate authority knows what to do with this CSR. So create a new CSR and skip the renewal. Always! Use the same Server Keep in mind that on IIS at least you should always create your certificate on a single server and then when you receive the final certificate from your provider import it on that server. IIS tracks the CSR it created and requires it in order to import the final certificate properly. So if for some reason you try to install the certificate on another server, it won’t work. I’ve also run into trouble trying to install the same certificate twice – this time around I didn’t give my certificate the proper friendly name and IIS failed to allow me to assign the certificate to any of my Web sites. So I removed the certificate and tried to import again, only to find it failed the second time around. There are other ways to fix this, but in my case I had to have the certificate re-issued to work – not what you want to do. Regardless of what you do though, when you import make sure you do it right the first time by crossing all your t’s and dotting your i's– it’ll save you a lot of grief! You don’t actually have to use the server that the certificate gets installed on to generate the CSR and first install it, but it is generally a good idea to do so just so you can get the certificate installed into the right place right away. If you have access to the server where you need to install the certificate you might as well use it. But you can use another machine to generated the and install the certificate, then export the certificate and move it to another machine as needed. So you can use your Dev machine to create a certificate then export it and install it on a live server. More on installation and back up/export later. Installing the Certificate Once you’ve submitted a CSR request your provider will process the request and eventually issue you a new final certificate that contains another text file with the final key to import into your certificate store. IIS does this by combining the content in your certificate request with the original CSR. If all goes well your new certificate shows up in the certificate list and you’re ready to assign the certificate to your sites. Make sure you use a friendly name that matches domain name of your site. So use *.mysite.com or www.mysite.com or store.mysite.com to ensure IIS recognizes the certificate. I made the mistake of not naming my friendly name this way and found that IIS was unable to link my sites to my wildcard certificate. It needed to have the *. as part of the certificate otherwise the Hostname input field was blanked out. Changing the Friendly Name If you by accidentally used an invalid friendly name you can change it later in the Windows certificate store. Bring up a Run Box Type MMC File | Add/Remove Snap In Add Certificates | Computer Account | Local Computer Drill into Certificates | Personal | Certificates Find your Certificate | Right Click | Properties Edit the Friendly Name | Click OK Backing up your Certificate The first thing you should do once your certificate is successfully installed is to back it up! In case your server crashes or you otherwise lose your configuration this will ensure you have an easy way to recover and reinstall your certificate either on the same server or a different one. If you’re running a server farm or using a wildcard certificate you also need to get the certificate onto other machines and a PFX file import is the easiest way to do this. To back up your certificate select your certificate and choose Export from the context or sidebar menu: The Export Certificate option allows you to export a password protected binary file that you can import in a single step. You can copy the resulting binary PFX file to back up or copy to other machines to install on. Importing the certificate on another machine is as easy as pointing at the PFX file and specifying the password. IIS handles the rest. Assigning a new certificate to your Site Once you have the new certificate installed, all that’s left to do is assign it to your site. In IIS select your Web site and bring up the Site Bindings from the right sidebar. Add a new binding for https, bind it to port 443, specify your hostname and pick the certificate from the pick list. If you’re using a root site make sure to set up your certificate for www.yoursite.com and also for yoursite.com so that both work properly with SSL. Note that you need to explicitly configure each hostname for a certificate if you plan to use SSL. Luckily if you update your SSL certificate in the following year, IIS prompts you and asks whether you like to update all other sites that are using the existing cert to the newer cert. And you’re done. So what’s the Pain? So, all of this is old hat and it doesn’t look all that bad right? So what’s the pain here? Well if you follow the instructions and do everything right, then the process is about as straight forward as you would expect it to be. You create a cert request, you import it and assign it to your sites. That’s the basic steps and to be perfectly fair it works well – if nothing goes wrong. However, renewing tends to be the problem. The first unintuitive issue is that you simply shouldn’t renew but create a new CSR and generate your new certificate from that. Over the years I’ve fallen prey to the belief that Microsoft eventually will fix this so that the renewal creates the same type of CSR as the old cert, but apparently that will just never happen. Booo! The other problem I ran into is that I accidentally misnamed my imported certificate which in turn set off a chain of events that caused my originally issued certificate to become uninstallable. When I received my completed certificate I installed it and it installed just fine, but the friendly name was wrong. As a result IIS refused to assign the certificate to any of my host headered sites. That’s strike number one. Why the heck should the friendly name have any effect on the ability to attach the certificate??? Next I uninstalled the certificate because I figured that would be the easiest way to make sure I get it right. But I found that I could not reinstall my certificate. I kept getting these stop errors: "ASN1 bad tag value met" that would prevent the installation from completion. After searching around for this error and reading countless long messages on forums, I found that this error supposedly does not actually mean the install failed, but the list wouldn’t refresh. Commodo has this to say: Note: There is a known issue in IIS 7 giving the following error: "Cannot find the certificate request associated with this certificate file. A certificate request must be completed on the computer where it was created." You may also receive a message stating "ASN1 bad tag value met". If this is the same server that you generated the CSR on then, in most cases, the certificate is actually installed. Simply cancel the dialog and press "F5" to refresh the list of server certificates. If the new certificate is now in the list, you can continue with the next step. If it is not in the list, you will need to reissue your certificate using a new CSR (see our CSR creation instructions for IIS 7). After creating a new CSR, login to your Comodo account and click the 'replace' button for your certificate. Not sure if this issue is fixed in IIS 8 but that’s an insane bug to have crop up. As it turns out, in my case the refresh didn’t work and the certificate didn’t show up in the IIS list after the reinstall. In fact when looking at the certificate store I could see my certificate was installed in the right place, but the private key is missing which is most likely why IIS is not picking it up. It looks like IIS could not match the final cert to the original CSR generated. But again some sort of message to that affect might be helpful instead of ASN1 bad tag value met. Recovering the Private Key So it turns out my original problem was that I received the published key, but when I imported the private key was missing. There’s a relatively easy way to recover from this. If your certificate doesn’t show up in IIS check in the certificate store for the local machine (see steps above on how to bring this up). If you look at the certificate in Certificates/Personal/Certificates make sure you see the key as shown in the image below: if the key is missing it means that the certificate is missing the private key most likely. To fix a certificate you can do the following: Double click the certificate Go to the Details Tab Copy down the Serial number You can copy the serial number from the area blurred out above. The serial number will be in a format like ?00 a7 9b a1 a4 9d 91 63 57 d6 9f 26 b8 ee 79 b5 cb and you’ll need to strip out the spaces in order to use it in the next step. Next open up an Administrative command prompt and issue the following command: certutil -repairstore my 00a79ba1a49d916357d69f26b8ee79b5cb You should get a confirmation message that the repair worked. If you now go back to the certificate store you should now see the key icon show up on the certificate. Your certificate is fixed. Now go back into IIS Manager and refresh the list of certificates and if all goes well you should see all the certificates that showed in the cert store now: Remember – back up the key first then map to your site… Summary I deal with a lot of customers who run their own IIS servers, and I can’t tell you how often I hear about botched SSL installations. When I posted some of my issues on Twitter yesterday I got a hell storm of “me too” responses. I’m clearly not the only one, who’s run into this especially with renewals. I feel pretty comfortable with IIS configuration and I do a lot of it for support purposes, but the SSL configuration is one that never seems to go seamlessly. This blog post is meant as reminder to myself to read next time I do a renewal. So I can dot my i's and dash my t’s before I get caught in the mess I’m dealing with today. Hopefully some of you find this useful as well.© Rick Strahl, West Wind Technologies, 2005-2014Posted in IIS7 Security Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Creating a dynamic proxy generator with c# – Part 3 – Creating the constructors

- by SeanMcAlinden

Creating a dynamic proxy generator with c# – Part 1 – Creating the Assembly builder, Module builder and caching mechanism Creating a dynamic proxy generator with c# – Part 2 – Interceptor Design For the latest code go to http://rapidioc.codeplex.com/ When building our proxy type, the first thing we need to do is build the constructors. There needs to be a corresponding constructor for each constructor on the passed in base type. We also want to create a field to store the interceptors and construct this list within each constructor. So assuming the passed in base type is a User<int, IRepository> class, were looking to generate constructor code like the following: Default Constructor public User`2_RapidDynamicBaseProxy() { this.interceptors = new List<IInterceptor<User<int, IRepository>>>(); DefaultInterceptor<User<int, IRepository>> item = new DefaultInterceptor<User<int, IRepository>>(); this.interceptors.Add(item); } Parameterised Constructor public User`2_RapidDynamicBaseProxy(IRepository repository1) : base(repository1) { this.interceptors = new List<IInterceptor<User<int, IRepository>>>(); DefaultInterceptor<User<int, IRepository>> item = new DefaultInterceptor<User<int, IRepository>>(); this.interceptors.Add(item); } As you can see, we first populate a field on the class with a new list of the passed in base type. Construct our DefaultInterceptor class. Add the DefaultInterceptor instance to our interceptor collection. Although this seems like a relatively small task, there is a fair amount of work require to get this going. Instead of going through every line of code – please download the latest from http://rapidioc.codeplex.com/ and debug through. In this post I’m going to concentrate on explaining how it works. TypeBuilder The TypeBuilder class is the main class used to create the type. You instantiate a new TypeBuilder using the assembly module we created in part 1. /// <summary> /// Creates a type builder. /// </summary> /// <typeparam name="TBase">The type of the base class to be proxied.</typeparam> public static TypeBuilder CreateTypeBuilder<TBase>() where TBase : class { TypeBuilder typeBuilder = DynamicModuleCache.Get.DefineType ( CreateTypeName<TBase>(), TypeAttributes.Class | TypeAttributes.Public, typeof(TBase), new Type[] { typeof(IProxy) } ); if (typeof(TBase).IsGenericType) { GenericsHelper.MakeGenericType(typeof(TBase), typeBuilder); } return typeBuilder; } private static string CreateTypeName<TBase>() where TBase : class { return string.Format("{0}_RapidDynamicBaseProxy", typeof(TBase).Name); } As you can see, I’ve create a new public class derived from TBase which also implements my IProxy interface, this is used later for adding interceptors. If the base type is generic, the following GenericsHelper.MakeGenericType method is called. GenericsHelper using System; using System.Reflection.Emit; namespace Rapid.DynamicProxy.Types.Helpers { /// <summary> /// Helper class for generic types and methods. /// </summary> internal static class GenericsHelper { /// <summary> /// Makes the typeBuilder a generic. /// </summary> /// <param name="concrete">The concrete.</param> /// <param name="typeBuilder">The type builder.</param> public static void MakeGenericType(Type baseType, TypeBuilder typeBuilder) { Type[] genericArguments = baseType.GetGenericArguments(); string[] genericArgumentNames = GetArgumentNames(genericArguments); GenericTypeParameterBuilder[] genericTypeParameterBuilder = typeBuilder.DefineGenericParameters(genericArgumentNames); typeBuilder.MakeGenericType(genericTypeParameterBuilder); } /// <summary> /// Gets the argument names from an array of generic argument types. /// </summary> /// <param name="genericArguments">The generic arguments.</param> public static string[] GetArgumentNames(Type[] genericArguments) { string[] genericArgumentNames = new string[genericArguments.Length]; for (int i = 0; i < genericArguments.Length; i++) { genericArgumentNames[i] = genericArguments[i].Name; } return genericArgumentNames; } } } As you can see, I’m getting all of the generic argument types and names, creating a GenericTypeParameterBuilder and then using the typeBuilder to make the new type generic. InterceptorsField The interceptors field will store a List<IInterceptor<TBase>>. Fields are simple made using the FieldBuilder class. The following code demonstrates how to create the interceptor field. FieldBuilder interceptorsField = typeBuilder.DefineField( "interceptors", typeof(System.Collections.Generic.List<>).MakeGenericType(typeof(IInterceptor<TBase>)), FieldAttributes.Private ); The field will now exist with the new Type although it currently has no data – we’ll deal with this in the constructor. Add method for interceptorsField To enable us to add to the interceptorsField list, we are going to utilise the Add method that already exists within the System.Collections.Generic.List class. We still however have to create the methodInfo necessary to call the add method. This can be done similar to the following: Add Interceptor Field MethodInfo addInterceptor = typeof(List<>) .MakeGenericType(new Type[] { typeof(IInterceptor<>).MakeGenericType(typeof(TBase)) }) .GetMethod ( "Add", BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic, null, new Type[] { typeof(IInterceptor<>).MakeGenericType(typeof(TBase)) }, null ); So we’ve create a List<IInterceptor<TBase>> type, then using the type created a method info called Add which accepts an IInterceptor<TBase>. Now in our constructor we can use this to call this.interceptors.Add(// interceptor); Building the Constructors This will be the first hard-core part of the proxy building process so I’m going to show the class and then try to explain what everything is doing. For a clear view, download the source from http://rapidioc.codeplex.com/, go to the test project and debug through the constructor building section. Anyway, here it is: DynamicConstructorBuilder using System; using System.Collections.Generic; using System.Reflection; using System.Reflection.Emit; using Rapid.DynamicProxy.Interception; using Rapid.DynamicProxy.Types.Helpers; namespace Rapid.DynamicProxy.Types.Constructors { /// <summary> /// Class for creating the proxy constructors. /// </summary> internal static class DynamicConstructorBuilder { /// <summary> /// Builds the constructors. /// </summary> /// <typeparam name="TBase">The base type.</typeparam> /// <param name="typeBuilder">The type builder.</param> /// <param name="interceptorsField">The interceptors field.</param> public static void BuildConstructors<TBase> ( TypeBuilder typeBuilder, FieldBuilder interceptorsField, MethodInfo addInterceptor ) where TBase : class { ConstructorInfo interceptorsFieldConstructor = CreateInterceptorsFieldConstructor<TBase>(); ConstructorInfo defaultInterceptorConstructor = CreateDefaultInterceptorConstructor<TBase>(); ConstructorInfo[] constructors = typeof(TBase).GetConstructors(); foreach (ConstructorInfo constructorInfo in constructors) { CreateConstructor<TBase> ( typeBuilder, interceptorsField, interceptorsFieldConstructor, defaultInterceptorConstructor, addInterceptor, constructorInfo ); } } #region Private Methods private static void CreateConstructor<TBase> ( TypeBuilder typeBuilder, FieldBuilder interceptorsField, ConstructorInfo interceptorsFieldConstructor, ConstructorInfo defaultInterceptorConstructor, MethodInfo AddDefaultInterceptor, ConstructorInfo constructorInfo ) where TBase : class { Type[] parameterTypes = GetParameterTypes(constructorInfo); ConstructorBuilder constructorBuilder = CreateConstructorBuilder(typeBuilder, parameterTypes); ILGenerator cIL = constructorBuilder.GetILGenerator(); LocalBuilder defaultInterceptorMethodVariable = cIL.DeclareLocal(typeof(DefaultInterceptor<>).MakeGenericType(typeof(TBase))); ConstructInterceptorsField(interceptorsField, interceptorsFieldConstructor, cIL); ConstructDefaultInterceptor(defaultInterceptorConstructor, cIL, defaultInterceptorMethodVariable); AddDefaultInterceptorToInterceptorsList ( interceptorsField, AddDefaultInterceptor, cIL, defaultInterceptorMethodVariable ); CreateConstructor(constructorInfo, parameterTypes, cIL); } private static void CreateConstructor(ConstructorInfo constructorInfo, Type[] parameterTypes, ILGenerator cIL) { cIL.Emit(OpCodes.Ldarg_0); if (parameterTypes.Length > 0) { LoadParameterTypes(parameterTypes, cIL); } cIL.Emit(OpCodes.Call, constructorInfo); cIL.Emit(OpCodes.Ret); } private static void LoadParameterTypes(Type[] parameterTypes, ILGenerator cIL) { for (int i = 1; i <= parameterTypes.Length; i++) { cIL.Emit(OpCodes.Ldarg_S, i); } } private static void AddDefaultInterceptorToInterceptorsList ( FieldBuilder interceptorsField, MethodInfo AddDefaultInterceptor, ILGenerator cIL, LocalBuilder defaultInterceptorMethodVariable ) { cIL.Emit(OpCodes.Ldarg_0); cIL.Emit(OpCodes.Ldfld, interceptorsField); cIL.Emit(OpCodes.Ldloc, defaultInterceptorMethodVariable); cIL.Emit(OpCodes.Callvirt, AddDefaultInterceptor); } private static void ConstructDefaultInterceptor ( ConstructorInfo defaultInterceptorConstructor, ILGenerator cIL, LocalBuilder defaultInterceptorMethodVariable ) { cIL.Emit(OpCodes.Newobj, defaultInterceptorConstructor); cIL.Emit(OpCodes.Stloc, defaultInterceptorMethodVariable); } private static void ConstructInterceptorsField ( FieldBuilder interceptorsField, ConstructorInfo interceptorsFieldConstructor, ILGenerator cIL ) { cIL.Emit(OpCodes.Ldarg_0); cIL.Emit(OpCodes.Newobj, interceptorsFieldConstructor); cIL.Emit(OpCodes.Stfld, interceptorsField); } private static ConstructorBuilder CreateConstructorBuilder(TypeBuilder typeBuilder, Type[] parameterTypes) { return typeBuilder.DefineConstructor ( MethodAttributes.Public | MethodAttributes.SpecialName | MethodAttributes.RTSpecialName | MethodAttributes.HideBySig, CallingConventions.Standard, parameterTypes ); } private static Type[] GetParameterTypes(ConstructorInfo constructorInfo) { ParameterInfo[] parameterInfoArray = constructorInfo.GetParameters(); Type[] parameterTypes = new Type[parameterInfoArray.Length]; for (int p = 0; p < parameterInfoArray.Length; p++) { parameterTypes[p] = parameterInfoArray[p].ParameterType; } return parameterTypes; } private static ConstructorInfo CreateInterceptorsFieldConstructor<TBase>() where TBase : class { return ConstructorHelper.CreateGenericConstructorInfo ( typeof(List<>), new Type[] { typeof(IInterceptor<TBase>) }, BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic ); } private static ConstructorInfo CreateDefaultInterceptorConstructor<TBase>() where TBase : class { return ConstructorHelper.CreateGenericConstructorInfo ( typeof(DefaultInterceptor<>), new Type[] { typeof(TBase) }, BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic ); } #endregion } } So, the first two tasks within the class should be fairly clear, we are creating a ConstructorInfo for the interceptorField list and a ConstructorInfo for the DefaultConstructor, this is for instantiating them in each contructor. We then using Reflection get an array of all of the constructors in the base class, we then loop through the array and create a corresponding proxy contructor. Hopefully, the code is fairly easy to follow other than some new types and the dreaded Opcodes. ConstructorBuilder This class defines a new constructor on the type. ILGenerator The ILGenerator allows the use of Reflection.Emit to create the method body. LocalBuilder The local builder allows the storage of data in local variables within a method, in this case it’s the constructed DefaultInterceptor. Constructing the interceptors field The first bit of IL you’ll come across as you follow through the code is the following private method used for constructing the field list of interceptors. private static void ConstructInterceptorsField ( FieldBuilder interceptorsField, ConstructorInfo interceptorsFieldConstructor, ILGenerator cIL ) { cIL.Emit(OpCodes.Ldarg_0); cIL.Emit(OpCodes.Newobj, interceptorsFieldConstructor); cIL.Emit(OpCodes.Stfld, interceptorsField); } The first thing to know about generating code using IL is that you are using a stack, if you want to use something, you need to push it up the stack etc. etc. OpCodes.ldArg_0 This opcode is a really interesting one, basically each method has a hidden first argument of the containing class instance (apart from static classes), constructors are no different. This is the reason you can use syntax like this.myField. So back to the method, as we want to instantiate the List in the interceptorsField, first we need to load the class instance onto the stack, we then load the new object (new List<TBase>) and finally we store it in the interceptorsField. Hopefully, that should follow easily enough in the method. In each constructor you would now have this.interceptors = new List<User<int, IRepository>>(); Constructing and storing the DefaultInterceptor The next bit of code we need to create is the constructed DefaultInterceptor. Firstly, we create a local builder to store the constructed type. Create a local builder LocalBuilder defaultInterceptorMethodVariable = cIL.DeclareLocal(typeof(DefaultInterceptor<>).MakeGenericType(typeof(TBase))); Once our local builder is ready, we then need to construct the DefaultInterceptor<TBase> and store it in the variable. Connstruct DefaultInterceptor private static void ConstructDefaultInterceptor ( ConstructorInfo defaultInterceptorConstructor, ILGenerator cIL, LocalBuilder defaultInterceptorMethodVariable ) { cIL.Emit(OpCodes.Newobj, defaultInterceptorConstructor); cIL.Emit(OpCodes.Stloc, defaultInterceptorMethodVariable); } As you can see, using the ConstructorInfo named defaultInterceptorConstructor, we load the new object onto the stack. Then using the store local opcode (OpCodes.Stloc), we store the new object in the local builder named defaultInterceptorMethodVariable. Add the constructed DefaultInterceptor to the interceptors field collection Using the add method created earlier in this post, we are going to add the new DefaultInterceptor object to the interceptors field collection. Add Default Interceptor private static void AddDefaultInterceptorToInterceptorsList ( FieldBuilder interceptorsField, MethodInfo AddDefaultInterceptor, ILGenerator cIL, LocalBuilder defaultInterceptorMethodVariable ) { cIL.Emit(OpCodes.Ldarg_0); cIL.Emit(OpCodes.Ldfld, interceptorsField); cIL.Emit(OpCodes.Ldloc, defaultInterceptorMethodVariable); cIL.Emit(OpCodes.Callvirt, AddDefaultInterceptor); } So, here’s whats going on. The class instance is first loaded onto the stack using the load argument at index 0 opcode (OpCodes.Ldarg_0) (remember the first arg is the hidden class instance). The interceptorsField is then loaded onto the stack using the load field opcode (OpCodes.Ldfld). We then load the DefaultInterceptor object we stored locally using the load local opcode (OpCodes.Ldloc). Then finally we call the AddDefaultInterceptor method using the call virtual opcode (Opcodes.Callvirt). Completing the constructor The last thing we need to do is complete the constructor. Complete the constructor private static void CreateConstructor(ConstructorInfo constructorInfo, Type[] parameterTypes, ILGenerator cIL) { cIL.Emit(OpCodes.Ldarg_0); if (parameterTypes.Length > 0) { LoadParameterTypes(parameterTypes, cIL); } cIL.Emit(OpCodes.Call, constructorInfo); cIL.Emit(OpCodes.Ret); } private static void LoadParameterTypes(Type[] parameterTypes, ILGenerator cIL) { for (int i = 1; i <= parameterTypes.Length; i++) { cIL.Emit(OpCodes.Ldarg_S, i); } } So, the first thing we do again is load the class instance using the load argument at index 0 opcode (OpCodes.Ldarg_0). We then load each parameter using OpCode.Ldarg_S, this opcode allows us to specify an index position for each argument. We then setup calling the base constructor using OpCodes.Call and the base constructors ConstructorInfo. Finally, all methods are required to return, even when they have a void return. As there are no values on the stack after the OpCodes.Call line, we can safely call the OpCode.Ret to give the constructor a void return. If there was a value, we would have to pop the value of the stack before calling return otherwise, the method would try and return a value. Conclusion This was a slightly hardcore post but hopefully it hasn’t been too hard to follow. The main thing is that a number of the really useful opcodes have been used and now the dynamic proxy is capable of being constructed. If you download the code and debug through the tests at http://rapidioc.codeplex.com/, you’ll be able to create proxies at this point, they cannon do anything in terms of interception but you can happily run the tests, call base methods and properties and also take a look at the created assembly in Reflector. Hope this is useful. The next post should be up soon, it will be covering creating the private methods for calling the base class methods and properties. Kind Regards, Sean.

Read the article

IIS 7 Authentication: Certain users can't authenticate, while almost all others can.

- by user35335

I'm using IIS 7 Digest authentication to control access to a certain directory containing files. Users access the files through a department website from inside our network and outside. I've set NTFS permissions on the directory to allow a certain AD group to view the files. When I click a link to one of those files on the website I get prompted for a username and password. With most users everything works fine, but with a few of them it prompts for a password 3 times and then get: 401 - Unauthorized: Access is denied due to invalid credentials. But other users that are in the group can get in without a problem. If I switch it over to Windows Authentication, then the trouble users can log in fine. That directory is also shared, and users that can't log in through the website are able to browse to the share and view files in it, so I know that the permissions are ok. Here's the portion of the IIS log where I tried to download the file (/assets/files/secure/WWGNL.pdf): 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bullet.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bgOFF.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:21 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 2 5 0 2010-02-19 19:47:36 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 0 2010-02-19 19:47:43 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:46 xxx.xxx.xxx.xxx GET /manager/media/script/_session.gif 0.19665693119168282 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 203 2010-02-19 19:47:46 xxx.xxx.xxx.xxx POST /manager/index.php - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 296 2010-02-19 19:47:56 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:59 xxx.xxx.xxx.xxx GET /favicon.ico - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 404 0 2 0 Here's the Failed Logon attempt in the Security Log: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 2/19/2010 11:47:43 AM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: WEB4.net.domain.org Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: jim.lastname Account Domain: net.domain.org Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: 10.5.16.138 Source Port: 50065 Detailed Authentication Information: Logon Process: WDIGEST Authentication Package: WDigest Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-a5ba-3e3b0328c30d}" /> <EventID>4625</EventID> <Version>0</Version> <Level>0</Level> <Task>12544</Task> <Opcode>0</Opcode> <Keywords>0x8010000000000000</Keywords> <TimeCreated SystemTime="2010-02-19T19:47:43.890Z" /> <EventRecordID>2276316</EventRecordID> <Correlation /> <Execution ProcessID="612" ThreadID="692" /> <Channel>Security</Channel> <Computer>WEB4.net.domain.org</Computer> <Security /> </System> <EventData> <Data Name="SubjectUserSid">S-1-0-0</Data> <Data Name="SubjectUserName">-</Data> <Data Name="SubjectDomainName">-</Data> <Data Name="SubjectLogonId">0x0</Data> <Data Name="TargetUserSid">S-1-0-0</Data> <Data Name="TargetUserName">jim.lastname</Data> <Data Name="TargetDomainName">net.domain.org</Data> <Data Name="Status">0xc000006d</Data> <Data Name="FailureReason">%%2313</Data> <Data Name="SubStatus">0xc000006a</Data> <Data Name="LogonType">3</Data> <Data Name="LogonProcessName">WDIGEST</Data> <Data Name="AuthenticationPackageName">WDigest</Data> <Data Name="WorkstationName">-</Data> <Data Name="TransmittedServices">-</Data> <Data Name="LmPackageName">-</Data> <Data Name="KeyLength">0</Data> <Data Name="ProcessId">0x0</Data> <Data Name="ProcessName">-</Data> <Data Name="IpAddress">10.5.16.138</Data> <Data Name="IpPort">50065</Data> </EventData> </Event>

Read the article

URL Rewrite – Multiple domains under one site. Part II

- by OWScott

I believe I have it … I’ve been meaning to put together the ultimate outgoing rule for hosting multiple domains under one site. I finally sat down this week and setup a few test cases, and created one rule to rule them all. In Part I of this two part series, I covered the incoming rule necessary to host a site in a subfolder of a website, while making it appear as if it’s in the root of the site. Part II won’t work without applying Part I first, so if you haven’t read it, I encourage you to read it now. However, the incoming rule by itself doesn’t address everything. Here’s the problem … Let’s say that we host www.site2.com in a subfolder called site2, off of masterdomain.com. This is the same example I used in Part I. Using an incoming rewrite rule, we are able to make a request to www.site2.com even though the site is really in the /site2 folder. The gotcha comes with any type of path that ASP.NET generates (I’m sure other scripting technologies could do the same too). ASP.NET thinks that the path to the root of the site is /site2, but the URL is /. See the issue? If ASP.NET generates a path or a redirect for us, it will always add /site2 to the URL. That results in a path that looks something like www.site2.com/site2. In Part I, I mentioned that you should add a condition where “{PATH_INFO} ‘does not match’ /site2”. That allows www.site2.com/site2 and www.site2.com to both function the same. This allows the site to always work, but if you want to hide /site2 in the URL, you need to take it one step further. One way to address this is in your code. Ultimately this is the best bet. Ruslan Yakushev has a great article on a few considerations that you can address in code. I recommend giving that serious consideration. Additionally, if you have upgraded to ASP.NET 3.5 SP1 or greater, it takes care of some of the references automatically for you. However, what if you inherit an existing application? Or you can’t easily go through your existing site and make the code changes? If this applies to you, read on. That’s where URL Rewrite 2.0 comes in. With URL Rewrite 2.0, you can create an outgoing rule that will remove the /site2 before the page is sent back to the user. This means that you can take an existing application, host it in a subfolder of your site, and ensure that the URL never reveals that it’s in a subfolder. Performance Considerations Performance overhead is something to be mindful of. These outbound rules aren’t simply changing the server variables. The first rule I’ll cover below needs to parse the HTML body and pull out the path (i.e. /site2) on the way through. This will add overhead, possibly significant if you have large pages and a busy site. In other words, your mileage may vary and you may need to test to see the impact that these rules have. Don’t worry too much though. For many sites, the performance impact is negligible. So, how do we do it? Creating the Outgoing Rule There are really two things to keep in mind. First, ASP.NET applications frequently generate a URL that adds the /site2 back into the URL. In addition to URLs, they can be in form elements, img elements and the like. The goal is to find all of those situations and rewrite it on the way out. Let’s call this the ‘URL problem’. Second, and similarly, ASP.NET can send a LOCATION redirect that causes a redirect back to another page. Again, ASP.NET isn’t aware of the different URL and it will add the /site2 to the redirect. Form Authentication is a good example on when this occurs. Try to password protect a site running from a subfolder using forms auth and you’ll quickly find that the URL becomes www.site2.com/site2 again. Let’s term this the ‘redirect problem’. Solving the URL Problem – Outgoing Rule #1 Let’s create a rule that removes the /site2 from any URL. We want to remove it from relative URLs like /site2/something, or absolute URLs like http://www.site2.com/site2/something. Most URLs that ASP.NET creates will be relative URLs, but I figure that there may be some applications that piece together a full URL, so we might as well expect that situation. Let’s get started. First, create a new outbound rule. You can create the rule within the /site2 folder which will reduce the performance impact of the rule. Just a reminder that incoming rules for this situation won’t work in a subfolder … but outgoing rules will. Give it a name that makes sense to you, for example “Outgoing – URL paths”. Precondition. If you place the rule in the subfolder, it will only run for that site and folder, so there isn’t need for a precondition. Run it for all requests. If you place it in the root of the site, you may want to create a precondition for HTTP_HOST = ^(www\.)?site2\.com$. For the Match section, there are a few things to consider. For performance reasons, it’s best to match the least amount of elements that you need to accomplish the task. For my test cases, I just needed to rewrite the <a /> tag, but you may need to rewrite any number of HTML elements. Note that as long as you have the exclude /site2 rule in your incoming rule as I described in Part I, some elements that don’t show their URL—like your images—will work without removing the /site2 from them. That reduces the processing needed for this rule. Leave the “matching scope” at “Response” and choose the elements that you want to change. Set the pattern to “^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)”. Make sure to replace ‘site2’ with your subfolder name in both places. Yes, I realize this is a pretty messy looking rule, but it handles a few situations. This rule will handle the following situations correctly: Original Rewritten using {R:1}{R:2} http://www.site2.com/site2/default.aspx http://www.site2.com/default.aspx http://www.site2.com/folder1/site2/default.aspx Won’t rewrite since it’s a sub-sub folder /site2/default.aspx /default.aspx site2/default.aspx /default.aspx /folder1/site2/default.aspx Won’t rewrite since it’s a sub-sub folder. For the conditions section, you can leave that be. Finally, for the rule, set the Action Type to “Rewrite” and set the Value to “{R:1}{R:2}”. The {R:1} and {R:2} are back references to the sections within parentheses. In other words, in http://domain.com/site2/something, {R:1} will be http://domain.com and {R:2} will be /something. If you view your rule from your web.config file (or applicationHost.config if it’s a global rule), it should look like this: <rule name="Outgoing - URL paths" enabled="true"> <match filterByTags="A" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> Solving the Redirect Problem Outgoing Rule #2 The second issue that we can run into is with a client-side redirect. This is triggered by a LOCATION response header that is sent to the client. Forms authentication is a common example. To reproduce this, password protect your subfolder and watch how it redirects and adds the subfolder path back in. Notice in my test case the extra paths: http://site2.com/site2/login.aspx?ReturnUrl=%2fsite2%2fdefault.aspx I want to remove /site2 from both the URL and the ReturnUrl querystring value. For semi-readability, let’s do this in 2 separate rules, one for the URL and one for the querystring. Create a second rule. As with the previous rule, it can be created in the /site2 subfolder. In the URL Rewrite wizard, select Outbound rules –> “Blank Rule”. Fill in the following information: Name response_location URL Precondition Don’t set Match: Matching Scope Server Variable Match: Variable Name RESPONSE_LOCATION Match: Pattern ^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*) Conditions Don’t set Action Type Rewrite Action Properties {R:1}{R:2} It should end up like so: <rule name="response_location URL"> <match serverVariable="RESPONSE_LOCATION" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> Outgoing Rule #3 Outgoing Rule #2 only takes care of the URL path, and not the querystring path. Let’s create one final rule to take care of the path in the querystring to ensure that ReturnUrl=%2fsite2%2fdefault.aspx gets rewritten to ReturnUrl=%2fdefault.aspx. The %2f is the HTML encoding for forward slash (/). Create a rule like the previous one, but with the following settings: Name response_location querystring Precondition Don’t set Match: Matching Scope Server Variable Match: Variable Name RESPONSE_LOCATION Match: Pattern (.*)%2fsite2(.*) Conditions Don’t set Action Type Rewrite Action Properties {R:1}{R:2} The config should look like this: <rule name="response_location querystring"> <match serverVariable="RESPONSE_LOCATION" pattern="(.*)%2fsite2(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> It’s possible to squeeze the last two rules into one, but it gets kind of confusing so I felt that it’s better to show it as two separate rules. Summary With the rules covered in these two parts, we’re able to have a site in a subfolder and make it appear as if it’s in the root of the site. Not only that, we can overcome automatic redirecting that is caused by ASP.NET, other scripting technologies, and especially existing applications. Following is an example of the incoming and outgoing rules necessary for a site called www.site2.com hosted in a subfolder called /site2. Remember that the outgoing rules can be placed in the /site2 folder instead of the in the root of the site. <rewrite> <rules> <rule name="site2.com in a subfolder" enabled="true" stopProcessing="true"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^(www\.)?site2\.com$" /> <add input="{PATH_INFO}" pattern="^/site2($|/)" negate="true" /> </conditions> <action type="Rewrite" url="/site2/{R:0}" /> </rule> </rules> <outboundRules> <rule name="Outgoing - URL paths" enabled="true"> <match filterByTags="A" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> <rule name="response_location URL"> <match serverVariable="RESPONSE_LOCATION" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> <rule name="response_location querystring"> <match serverVariable="RESPONSE_LOCATION" pattern="(.*)%2fsite2(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> </outboundRules> </rewrite> If you run into any situations that aren’t caught by these rules, please let me know so I can update this to be as complete as possible. Happy URL Rewriting!

Read the article

Another "Windows 7 entry missing from Grub2" Question

- by 4x10

Like many before me had the following problem that after installing Ubuntu (with windows 7 already installed), the grub boot loader wouldnt show windows 7 as a boot option, though i can boot fine if I use the "Choose Boot Device" options on the x220. The difference is that I try using UEFI only so many answers didn't really fit my problem, though i tried several stuffs: after running boot repair it destroyed the ubuntu boot loader custom entry in /etc/grub.d/40_custom for windows which doesnt show up many update-grub and reboots trying windows repair recovery thing while being there i also did bootrec.exe /FixBoot and update-grub and reboot again and finaly because it was so much fun, i installed linux all over again, while formatting and deleting everything linux related before that. Now that i think of it, Ubuntu also didn't notice Windows being there during the Setup and it still doesnt according to the Boot Info from Boot Repair. Boot Info Script 0.61-git-patched [23 April 2012] ============================= Boot Info Summary: =============================== => No boot loader is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi sda2: __________________________________________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sda4: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu precise (development branch) Boot files: /boot/grub/grub.cfg /etc/fstab sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sda6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 625,142,447 625,142,447 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 206,847 204,800 EFI System partition /dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 468,992 170,338,303 169,869,312 Data partition (Windows/Linux) /dev/sda4 170,338,304 330,338,304 160,000,001 Data partition (Windows/Linux) /dev/sda5 330,338,305 617,141,039 286,802,735 Data partition (Windows/Linux) /dev/sda6 617,141,040 625,141,040 8,000,001 Swap partition (Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 885C-ED1B vfat /dev/sda3 EE06CC0506CBCCB1 ntfs /dev/sda4 604dd3b2-64ca-4200-b8fb-820e8d0ca899 ext4 /dev/sda5 d62515fd-8120-4a74-b17b-0bdf244124a3 ext4 /dev/sda6 7078b649-fb2a-4c59-bd03-fd31ef440d37 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 /boot/efi vfat (rw) /dev/sda4 / ext4 (rw,errors=remount-ro) /dev/sda5 /home ext4 (rw) =========================== sda4/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod efi_gop insmod efi_uga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-20-generic } menuentry 'Ubuntu, with Linux 3.2.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 echo 'Loading Linux 3.2.0-20-generic ...' linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-20-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda4/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=885C-ED1B /boot/efi vfat defaults 0 1 # /home was on /dev/sda5 during installation UUID=d62515fd-8120-4a74-b17b-0bdf244124a3 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=7078b649-fb2a-4c59-bd03-fd31ef440d37 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda4: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 129.422874451 = 138.966753280 boot/grub/grub.cfg 1 83.059570312 = 89.184534528 boot/initrd.img-3.2.0-20-generic 2 101.393131256 = 108.870045696 boot/vmlinuz-3.2.0-20-generic 1 83.059570312 = 89.184534528 initrd.img 2 101.393131256 = 108.870045696 vmlinuz 1 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-04-25__23h40 =================== boot-repair version : 3.18-0ppa3~precise boot-sav version : 3.18-0ppa4~precise glade2script version : 0.3.2.1-0ppa7~precise internet: connected python-software-properties version : 0.82.7 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 591 not upgraded. dpkg-preconfigure: unable to re-open stdin: No such file or directory boot-repair is executed in installed-session (Ubuntu precise (development branch) , precise , Ubuntu , x86_64) WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== OSPROBER: /dev/sda4:The OS now in use - Ubuntu precise (development branch) CurrentSession:linux =================== BLKID: /dev/sda3: UUID="EE06CC0506CBCCB1" TYPE="ntfs" /dev/sda1: UUID="885C-ED1B" TYPE="vfat" /dev/sda4: UUID="604dd3b2-64ca-4200-b8fb-820e8d0ca899" TYPE="ext4" /dev/sda5: UUID="d62515fd-8120-4a74-b17b-0bdf244124a3" TYPE="ext4" /dev/sda6: UUID="7078b649-fb2a-4c59-bd03-fd31ef440d37" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted. =================== /etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" EFI_OF_PART[1] (, ) =================== dmesg | grep EFI : [ 0.000000] EFI v2.00 by Lenovo [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000004e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000004e000-0x0000000000058000) (0MB) [ 0.000000] EFI: mem03: type=10, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005e000) (0MB) [ 0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000005e000-0x000000000005f000) (0MB) [ 0.000000] EFI: mem06: type=3, attr=0xf, range=[0x000000000005f000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB) [ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB) [ 0.000000] EFI: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] EFI: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000364e4000) (354MB) [ 0.000000] EFI: mem11: type=2, attr=0xf, range=[0x00000000364e4000-0x000000003726a000) (13MB) [ 0.000000] EFI: mem12: type=7, attr=0xf, range=[0x000000003726a000-0x0000000040000000) (141MB) [ 0.000000] EFI: mem13: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] EFI: mem14: type=7, attr=0xf, range=[0x0000000040200000-0x000000009df35000) (1501MB) [ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x000000009df35000-0x00000000d39a0000) (858MB) [ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x00000000d39a0000-0x00000000d39c0000) (0MB) [ 0.000000] EFI: mem17: type=7, attr=0xf, range=[0x00000000d39c0000-0x00000000d5df5000) (36MB) [ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x00000000d5df5000-0x00000000d6990000) (11MB) [ 0.000000] EFI: mem19: type=7, attr=0xf, range=[0x00000000d6990000-0x00000000d6b82000) (1MB) [ 0.000000] EFI: mem20: type=1, attr=0xf, range=[0x00000000d6b82000-0x00000000d6b9f000) (0MB) [ 0.000000] EFI: mem21: type=7, attr=0xf, range=[0x00000000d6b9f000-0x00000000d77b0000) (12MB) [ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x00000000d77b0000-0x00000000d780a000) (0MB) [ 0.000000] EFI: mem23: type=7, attr=0xf, range=[0x00000000d780a000-0x00000000d7826000) (0MB) [ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x00000000d7826000-0x00000000d7868000) (0MB) [ 0.000000] EFI: mem25: type=7, attr=0xf, range=[0x00000000d7868000-0x00000000d7869000) (0MB) [ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x00000000d7869000-0x00000000d786a000) (0MB) [ 0.000000] EFI: mem27: type=7, attr=0xf, range=[0x00000000d786a000-0x00000000d786b000) (0MB) [ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x00000000d786b000-0x00000000d786c000) (0MB) [ 0.000000] EFI: mem29: type=7, attr=0xf, range=[0x00000000d786c000-0x00000000d786d000) (0MB) [ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x00000000d786d000-0x00000000d825f000) (9MB) [ 0.000000] EFI: mem31: type=7, attr=0xf, range=[0x00000000d825f000-0x00000000d8261000) (0MB) [ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x00000000d8261000-0x00000000d82f7000) (0MB) [ 0.000000] EFI: mem33: type=7, attr=0xf, range=[0x00000000d82f7000-0x00000000d82f8000) (0MB) [ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x00000000d82f8000-0x00000000d8705000) (4MB) [ 0.000000] EFI: mem35: type=7, attr=0xf, range=[0x00000000d8705000-0x00000000d8706000) (0MB) [ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x00000000d8706000-0x00000000d8761000) (0MB) [ 0.000000] EFI: mem37: type=7, attr=0xf, range=[0x00000000d8761000-0x00000000d8768000) (0MB) [ 0.000000] EFI: mem38: type=4, attr=0xf, range=[0x00000000d8768000-0x00000000d9b9f000) (20MB) [ 0.000000] EFI: mem39: type=7, attr=0xf, range=[0x00000000d9b9f000-0x00000000d9e4c000) (2MB) [ 0.000000] EFI: mem40: type=2, attr=0xf, range=[0x00000000d9e4c000-0x00000000d9e52000) (0MB) [ 0.000000] EFI: mem41: type=3, attr=0xf, range=[0x00000000d9e52000-0x00000000da59f000) (7MB) [ 0.000000] EFI: mem42: type=5, attr=0x800000000000000f, range=[0x00000000da59f000-0x00000000da6c3000) (1MB) [ 0.000000] EFI: mem43: type=5, attr=0x800000000000000f, range=[0x00000000da6c3000-0x00000000da79f000) (0MB) [ 0.000000] EFI: mem44: type=6, attr=0x800000000000000f, range=[0x00000000da79f000-0x00000000da8b1000) (1MB) [ 0.000000] EFI: mem45: type=6, attr=0x800000000000000f, range=[0x00000000da8b1000-0x00000000da99f000) (0MB) [ 0.000000] EFI: mem46: type=0, attr=0xf, range=[0x00000000da99f000-0x00000000daa22000) (0MB) [ 0.000000] EFI: mem47: type=0, attr=0xf, range=[0x00000000daa22000-0x00000000daa9b000) (0MB) [ 0.000000] EFI: mem48: type=0, attr=0xf, range=[0x00000000daa9b000-0x00000000daa9c000) (0MB) [ 0.000000] EFI: mem49: type=0, attr=0xf, range=[0x00000000daa9c000-0x00000000daa9f000) (0MB) [ 0.000000] EFI: mem50: type=10, attr=0xf, range=[0x00000000daa9f000-0x00000000daadd000) (0MB) [ 0.000000] EFI: mem51: type=10, attr=0xf, range=[0x00000000daadd000-0x00000000dab9f000) (0MB) [ 0.000000] EFI: mem52: type=9, attr=0xf, range=[0x00000000dab9f000-0x00000000dabdc000) (0MB) [ 0.000000] EFI: mem53: type=9, attr=0xf, range=[0x00000000dabdc000-0x00000000dabff000) (0MB) [ 0.000000] EFI: mem54: type=4, attr=0xf, range=[0x00000000dabff000-0x00000000dac00000) (0MB) [ 0.000000] EFI: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e600000) (4582MB) [ 0.000000] EFI: mem56: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] EFI: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] ACPI: UEFI 00000000dabde000 0003E (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dabdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dabdc000 00292 (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.795807] fb0: EFI VGA frame buffer device [ 1.057243] EFI Variables Facility v0.08 2004-May-17 [ 9.122104] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver ReadEFI: /dev/sda , N 128 , 0 , , PRStart 1024 , PRSize 128 WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== PARTITIONS & DISKS: sda4 : sda, not-sepboot, grubenv-ok grub2, grub-efi, update-grub, 64, with-boot, is-os, gpt-but-not-EFI, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, apt-get, grub-install, . sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /mnt/boot-sav/sda3. sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /boot/efi. sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /home. sda : GPT-BIS, GPT, no-BIOS_boot, has-correctEFI, 2048 sectors * 512 bytes =================== PARTED: Model: ATA HITACHI HTS72323 (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 106MB 105MB fat32 EFI system partition boot 2 106MB 240MB 134MB Microsoft reserved partition msftres 3 240MB 87.2GB 87.0GB ntfs Basic data partition 4 87.2GB 169GB 81.9GB ext4 5 169GB 316GB 147GB ext4 6 316GB 320GB 4096MB linux-swap(v1) =================== MOUNT: /dev/sda4 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot/efi type vfat (rw) /dev/sda5 on /home type ext4 (rw) gvfs-fuse-daemon on /home/vierlex/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=vierlex) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /sys/block/sda: alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent /dev: agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 shm snapshot snd stderr stdin stdout tpm0 uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 watchdog zero /dev/mapper: control /boot/efi: EFI /boot/efi/EFI: Boot Microsoft ubuntu /boot/efi/efi: Boot Microsoft ubuntu /boot/efi/efi/Boot: bootx64.efi /boot/efi/efi/ubuntu: grubx64.efi WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== DF: Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 ext4 77G 4.1G 69G 6% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 3.9G 152K 3.9G 1% /run/shm /dev/sda1 vfat 96M 18M 79M 19% /boot/efi /dev/sda5 ext4 137G 2.2G 128G 2% /home /dev/sda3 fuseblk 81G 30G 52G 37% /mnt/boot-sav/sda3 =================== FDISK: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf34fe538 Device Boot Start End Blocks Id System /dev/sda1 1 625142447 312571223+ ee GPT =================== Before mainwindow FSCK no PASTEBIN yes WUBI no WINBOOT yes recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION yes (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) EFI detected. Please check the options. =================== Actions FSCK no PASTEBIN yes WUBI no WINBOOT no bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION no (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) No change has been performed on your computer. See you soon! internet: connected Thanks for your time and attention. EDIT: additional Info Request =No boot loader is installed in the MBR of /dev/sda. But maybe this is how it is supposed to work? yea this is ok. boot stuff seems to be on a seperate partition, in my case sda1. I'm very new to this UEFI thing too. missing files like bootmgr i don't really have a clue :D but yea, maybe thats how it suppose to be? Instead and whats not shown in the log for some reason: There is additional microsoft bootfiles on sda1 under /efi/microsoft/ [much stuff] I remember also doing some kind of hack to make a UEFI windows 7 usb stick. http://jake.io/b/2011/installing-windows-7-with-uefi-boot-on-an-x220-from-usb/ In short: creating and placing bootx64.efi on the stick so it can be booted in UEFI mode. boot order i decide that in my BIOS. i read somwhere that the thinkpad x220 (essential part of the serial number: 4921 http://www.lenovo.com/shop/americas/content/user_guides/x220_x220i_x220tablet_x220itablet_ug_en.pdf) doesnt really have UEFI interface or something, still, these 2 options are listed with all the other usual devices you can give a boot priority to. Right now it looks like this: Boot Priority Order 1. ubuntu 2. Windows Boot Manager 3. USB FDD 4. USB HDD 5. ATA HDD0 HITACHI [random string]

Search Results

Search found 12502 results on 501 pages for 'kind'.

Page 494/501 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501 | Next Page >

- by SigTerm

- by hdr

- by Tom

- by Chad La Guardia

- by Ordo

- by user1864539

- by MickyScion

- by Kurt W

- by kawtousse

- by WulfgarPro

- by NicMagnier

- by quanta

- by SeanMcAlinden

- by Rick Strahl

- by Rick Strahl

- by Glav

- by Rick Strahl

- by Jason Fitzpatrick

- by Rick Strahl

- by Rick Strahl

- by SeanMcAlinden

- by user35335

- by OWScott

- by 4x10

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501 | Next Page >