Search Results

Search found 14297 results on 572 pages for 'self tracking entities'.

Page 494/572 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

  • ADO.NET Data Services Entity Framework request error when property setter is internal

    - by Jim Straatman
    I receive an error message when exposing an ADO.NET Data Service using an Entity Framework data model that contains an entity (called "Case") with an internal setter on a property. If I modify the setter to be public (using the entity designer), the data services works fine. I don’t need the entity "Case" exposed in the data service, so I tried to limit which entities are exposed using SetEntitySetAccessRule. This didn’t work, and service end point fails with the same error. public static void InitializeService(IDataServiceConfiguration config) { config.SetEntitySetAccessRule("User", EntitySetRights.AllRead); } The error message is reported in a browser when the .svc endpoint is called. It is very generic, and reads “Request Error. The server encountered an error processing the request. See server logs for more details.” Unfortunately, there are no entries in the System and Application event logs. I found this stackoverflow question that shows how to configure tracing on the service. After doing so, the following NullReferenceExceptoin error was reported in the trace log. Does anyone know how to avoid this exception when including an entity with an internal setter? Blockquote 131076 3 0 2 MOTOJIM http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.TraceHandledException.aspx Handling an exception. 685a2910-19-128703978432492675 System.NullReferenceException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Object reference not set to an instance of an object. at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMemberMetadata(ResourceType resourceType, MetadataWorkspace workspace, IDictionary2 entitySets, IDictionary2 knownTypes) at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMetadata(IDictionary2 knownTypes, IDictionary2 entitySets) at System.Data.Services.Providers.BaseServiceProvider.PopulateMetadata() at System.Data.Services.DataService1.CreateProvider(Type dataServiceType, Object dataSourceInstance, DataServiceConfiguration&amp; configuration) at System.Data.Services.DataService1.EnsureProviderAndConfigForRequest() at System.Data.Services.DataService1.ProcessRequestForMessage(Stream messageBody) at SyncInvokeProcessRequestForMessage(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]&amp; outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage3(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage2(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage1(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet) </StackTrace> <ExceptionString>System.NullReferenceException: Object reference not set to an instance of an object. at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMemberMetadata(ResourceType resourceType, MetadataWorkspace workspace, IDictionary2 entitySets, IDictionary2 knownTypes) at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMetadata(IDictionary2 knownTypes, IDictionary2 entitySets) at System.Data.Services.Providers.BaseServiceProvider.P

    Read the article

  • OpenLDAP and SSL

    - by Stormshadow
    I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never

    Read the article

  • Can I force JAXB not to convert " into &quot;, for example, when marshalling to XML?

    - by Elliot
    I have an Object that is being marshalled to XML using JAXB. One element contains a String that includes quotes ("). The resulting XML has &quot; where the " existed. Even though this is normally preferred, I need my output to match a legacy system. How do I force JAXB to NOT convert the HTML entities? -- Thank you for the replies. However, I never see the handler escape() called. Can you take a look and see what I'm doing wrong? Thanks! package org.dc.model; import java.io.IOException; import java.io.Writer; import javax.xml.bind.JAXBContext; import javax.xml.bind.JAXBException; import javax.xml.bind.Marshaller; import org.dc.generated.Shiporder; import com.sun.xml.internal.bind.marshaller.CharacterEscapeHandler; public class PleaseWork { public void prettyPlease() throws JAXBException { Shiporder shipOrder = new Shiporder(); shipOrder.setOrderid("Order's ID"); shipOrder.setOrderperson("The woman said, \"How ya doin & stuff?\""); JAXBContext context = JAXBContext.newInstance("org.dc.generated"); Marshaller marshaller = context.createMarshaller(); marshaller.setProperty(Marshaller.JAXB_FORMATTED_OUTPUT, Boolean.TRUE); marshaller.setProperty(CharacterEscapeHandler.class.getName(), new CharacterEscapeHandler() { @Override public void escape(char[] ch, int start, int length, boolean isAttVal, Writer out) throws IOException { out.write("Called escape for characters = " + ch.toString()); } }); marshaller.marshal(shipOrder, System.out); } public static void main(String[] args) throws Exception { new PleaseWork().prettyPlease(); } } -- The output is this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <shiporder orderid="Order's ID"> <orderperson>The woman said, &quot;How ya doin &amp; stuff?&quot;</orderperson> </shiporder> and as you can see, the callback is never displayed. (Once I get the callback being called, I'll worry about having it actually do what I want.) --

    Read the article

  • Defining an Entity Framework 1:1 association

    - by Craig Fisher
    I'm trying to define a 1:1 association between two entities (one maps to a table and the other to a view - using DefinedQuery) in an Entity Framework model. When trying to define the mapping for this in the designer, it makes me choose the (1) table or view to map the association to. What am I supposed to choose? I can choose either of the two tables but then I am forced to choose a column from that table (or view) for each end of the relationship. I would expect to be able to choose a column from one table for one end of the association and a column from the other table for the other end of the association, but there's no way to do this. Here I've chosen to map to the "DW_ WF_ClaimInfo" view and it is forcing me to choose two columns from that view - one for each end of the relationship. I've also tried defining the mapping manually in the XML as follows: <AssociationSetMapping Name="Entity1Entity2" TypeName="ClaimsModel.Entity1Entity2" StoreEntitySet="Entity1"> <EndProperty Name="Entity2"> <ScalarProperty Name="DOCUMENT" ColumnName="DOCUMENT" /> </EndProperty> <EndProperty Name="Entity1"> <ScalarProperty Name="PK_DocumentId" ColumnName="PK_DocumentId" /> </EndProperty> </AssociationSetMapping> But this gives: Error 2010: The Column 'DOCUMENT' specified as part of this MSL does not exist in MetadataWorkspace. Seems like it still expects both columns to come from the same table, which doesn't make sense to me. Furthermore, if I select the same key for each end, e.g.: <AssociationSetMapping Name="Entity1Entity2" TypeName="ClaimsModel.Entity1Entity2" StoreEntitySet="Entity1"> <EndProperty Name="Entity2"> <ScalarProperty Name="DOCUMENT" ColumnName="PK_DocumentId" /> </EndProperty> <EndProperty Name="Entity1"> <ScalarProperty Name="PK_DocumentId" ColumnName="PK_DocumentId" /> </EndProperty> </AssociationSetMapping> I then get: Error 3021: Problem in Mapping Fragment starting at line 675: Each of the following columns in table AssignedClaims is mapped to multiple conceptual side properties: AssignedClaims.PK_DocumentId is mapped to <AssignedClaimDW_WF_ClaimInfo.DW_WF_ClaimInfo.DOCUMENT, AssignedClaimDW_WF_ClaimInfo.AssignedClaim.PK_DocumentId> What am I not getting?

    Read the article

  • How can I use a custom TabItem control when databinding a TabControl in WPF?

    - by Russ
    I have a custom control that is derived from TabItem, and I want to databind that custom TabItem to a stock TabControl. I would rather avoid creating a new TabControl just for this rare case. This is what I have and I'm not having any luck getting the correct control to be loaded. In this case I want to use my ClosableTabItem control instead of the stock TabItem control. <TabControl x:Name="tabCases" IsSynchronizedWithCurrentItem="True" Controls:ClosableTabItem.TabClose="TabClosed" > <TabControl.ItemTemplate> <DataTemplate DataType="{x:Type Controls:ClosableTabItem}" > <TextBlock Text="{Binding Path=Id}" /> </DataTemplate> </TabControl.ItemTemplate> <TabControl.ContentTemplate> <DataTemplate DataType="{x:Type Entities:Case}"> <CallLog:CaseReadOnlyDisplay DataContext="{Binding}" /> </DataTemplate> </TabControl.ContentTemplate> </TabControl> EDIT: This is what I ended up with, rather than trying to bind a custom control. The "CloseCommand" im getting from a previous question. <Style TargetType="{x:Type TabItem}" BasedOn="{StaticResource {x:Type TabItem}}" > <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type TabItem}"> <Border Name="Border" Background="LightGray" BorderBrush="Black" BorderThickness="1" CornerRadius="25,0,0,0" SnapsToDevicePixels="True"> <StackPanel Orientation="Horizontal"> <ContentPresenter x:Name="ContentSite" VerticalAlignment="Center" HorizontalAlignment="Center" ContentSource="Header" Margin="20,1,5,1"/> <Button Command="{Binding Path=CloseCommand}" Cursor="Hand" DockPanel.Dock="Right" Focusable="False" Margin="1,1,5,1" Background="Transparent" BorderThickness="0"> <Image Source="/Russound.Windows;component/Resources/Delete.png" Height="10" /> </Button> </StackPanel> </Border> <ControlTemplate.Triggers> <Trigger Property="IsSelected" Value="True"> <Setter Property="FontWeight" Value="Bold" /> <Setter TargetName="Border" Property="Background" Value="LightBlue" /> <Setter TargetName="Border" Property="BorderThickness" Value="1,1,1,0" /> <Setter TargetName="Border" Property="BorderBrush" Value="DarkBlue" /> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style>

    Read the article

  • MongoMapper and migrations

    - by Clint Miller
    I'm building a Rails application using MongoDB as the back-end and MongoMapper as the ORM tool. Suppose in version 1, I define the following model: class SomeModel include MongoMapper::Document key :some_key, String end Later in version 2, I realize that I need a new required key on the model. So, in version 2, SomeModel now looks like this: class SomeModel include MongoMapper::Document key :some_key, String key :some_new_key, String, :required => true end How do I migrate all my existing data to include some_new_key? Assume that I know how to set a reasonable default value for all the existing documents. Taking this a step further, suppose that in version 3, I realize that I really don't need some_key at all. So, now the model looks like this class SomeModel include MongoMapper::Document key :some_new_key, String, :required => true end But all the existing records in my database have values set for some_key, and it's just wasting space at this point. How do I reclaim that space? With ActiveRecord, I would have just created migrations to add the initial values of some_new_key (in the version1 - version2 migration) and to delete the values for some_key (in the version2 - version3 migration). What's the appropriate way to do this with MongoDB/MongoMapper? It seems to me that some method of tracking which migrations have been run is still necessary. Does such a thing exist? EDITED: I think people are missing the point of my question. There are times where you want to be able to run a script on a database to change or restructure the data in it. I gave two examples above, one where a new required key was added and one where a key can be removed and space can be reclaimed. How do you manage running these scripts? ActiveRecord migrations give you an easy way to run these scripts and to determine what scripts have already been run and what scripts have not been run. I can obviously write a Mongo script that does any update on the database, but what I'm looking for is a framework like migrations that lets me track which upgrade scripts have already been run.

    Read the article

  • Hive NR map progress inconsistent and regurlarly restart from 0%

    - by user92471
    I have a Yarn MR (with two ec2 instances to mapreduce) job on a dataset of approximately a thousand avro records, and the map phase is behaving erratically. See the progress below. Of course i checked the logs on resourcemanager and nodemanagers and saw nothing suspicious, but these logs are too verbose What is going on there ? hive> select * from nikon where qs_cs_s_aid='VIEW' limit 10; Total MapReduce jobs = 1 Launching Job 1 out of 1 Number of reduce tasks is set to 0 since there's no reduce operator Starting Job = job_1352281315350_0020, Tracking URL = http://blabla.ec2.internal:8088/proxy/application_1352281315350_0020/ Kill Command = /usr/lib/hadoop/bin/hadoop job -Dmapred.job.tracker=blabla.com:8032 -kill job_1352281315350_0020 Hadoop job information for Stage-1: number of mappers: 4; number of reducers: 0 2012-11-07 11:14:40,976 Stage-1 map = 0%, reduce = 0% 2012-11-07 11:15:06,136 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 10.38 sec 2012-11-07 11:15:07,253 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 12.18 sec 2012-11-07 11:15:08,371 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 12.18 sec 2012-11-07 11:15:09,491 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 12.18 sec 2012-11-07 11:15:10,643 Stage-1 map = 2%, reduce = 0%, Cumulative CPU 15.42 sec (...) 2012-11-07 11:15:35,441 Stage-1 map = 28%, reduce = 0%, Cumulative CPU 37.77 sec 2012-11-07 11:15:36,486 Stage-1 map = 28%, reduce = 0%, Cumulative CPU 37.77 sec here restart at 16% ? 2012-11-07 11:15:37,692 Stage-1 map = 16%, reduce = 0%, Cumulative CPU 21.15 sec 2012-11-07 11:15:38,815 Stage-1 map = 16%, reduce = 0%, Cumulative CPU 21.15 sec 2012-11-07 11:15:39,865 Stage-1 map = 16%, reduce = 0%, Cumulative CPU 21.15 sec 2012-11-07 11:15:41,064 Stage-1 map = 18%, reduce = 0%, Cumulative CPU 22.4 sec 2012-11-07 11:15:42,181 Stage-1 map = 18%, reduce = 0%, Cumulative CPU 22.4 sec 2012-11-07 11:15:43,299 Stage-1 map = 18%, reduce = 0%, Cumulative CPU 22.4 sec here restart at 0% ? 2012-11-07 11:15:44,418 Stage-1 map = 0%, reduce = 0% 2012-11-07 11:16:02,076 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 6.86 sec 2012-11-07 11:16:03,193 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 6.86 sec 2012-11-07 11:16:04,259 Stage-1 map = 2%, reduce = 0%, Cumulative CPU 8.45 sec (...) 2012-11-07 11:16:31,291 Stage-1 map = 22%, reduce = 0%, Cumulative CPU 35.34 sec 2012-11-07 11:16:32,414 Stage-1 map = 26%, reduce = 0%, Cumulative CPU 37.93 sec here restart at 11% ? 2012-11-07 11:16:33,459 Stage-1 map = 11%, reduce = 0%, Cumulative CPU 19.53 sec 2012-11-07 11:16:34,507 Stage-1 map = 11%, reduce = 0%, Cumulative CPU 19.53 sec 2012-11-07 11:16:35,731 Stage-1 map = 13%, reduce = 0%, Cumulative CPU 21.47 sec (...) 2012-11-07 11:16:46,839 Stage-1 map = 17%, reduce = 0%, Cumulative CPU 24.14 sec here restart at 0% ? 2012-11-07 11:16:47,939 Stage-1 map = 0%, reduce = 0% 2012-11-07 11:16:56,653 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 7.54 sec 2012-11-07 11:16:57,814 Stage-1 map = 1%, reduce = 0%, Cumulative CPU 7.54 sec (...) Needless to say the job crashes after some time with an Error: java.io.IOException: java.io.IOException: java.lang.ArrayIndexOutOfBoundsException: -56

    Read the article

  • Project Euler #15

    - by Aistina
    Hey everyone, Last night I was trying to solve challenge #15 from Project Euler: Starting in the top left corner of a 2×2 grid, there are 6 routes (without backtracking) to the bottom right corner. How many routes are there through a 20×20 grid? I figured this shouldn't be so hard, so I wrote a basic recursive function: const int gridSize = 20; // call with progress(0, 0) static int progress(int x, int y) { int i = 0; if (x < gridSize) i += progress(x + 1, y); if (y < gridSize) i += progress(x, y + 1); if (x == gridSize && y == gridSize) return 1; return i; } I verified that it worked for a smaller grids such as 2×2 or 3×3, and then set it to run for a 20×20 grid. Imagine my surprise when, 5 hours later, the program was still happily crunching the numbers, and only about 80% done (based on examining its current position/route in the grid). Clearly I'm going about this the wrong way. How would you solve this problem? I'm thinking it should be solved using an equation rather than a method like mine, but that's unfortunately not a strong side of mine. Update: I now have a working version. Basically it caches results obtained before when a n×m block still remains to be traversed. Here is the code along with some comments: // the size of our grid static int gridSize = 20; // the amount of paths available for a "NxM" block, e.g. "2x2" => 4 static Dictionary<string, long> pathsByBlock = new Dictionary<string, long>(); // calculate the surface of the block to the finish line static long calcsurface(long x, long y) { return (gridSize - x) * (gridSize - y); } // call using progress (0, 0) static long progress(long x, long y) { // first calculate the surface of the block remaining long surface = calcsurface(x, y); long i = 0; // zero surface means only 1 path remains // (we either go only right, or only down) if (surface == 0) return 1; // create a textual representation of the remaining // block, for use in the dictionary string block = (gridSize - x) + "x" + (gridSize - y); // if a same block has not been processed before if (!pathsByBlock.ContainsKey(block)) { // calculate it in the right direction if (x < gridSize) i += progress(x + 1, y); // and in the down direction if (y < gridSize) i += progress(x, y + 1); // and cache the result! pathsByBlock[block] = i; } // self-explanatory :) return pathsByBlock[block]; } Calling it 20 times, for grids with size 1×1 through 20×20 produces the following output: There are 2 paths in a 1 sized grid 0,0110006 seconds There are 6 paths in a 2 sized grid 0,0030002 seconds There are 20 paths in a 3 sized grid 0 seconds There are 70 paths in a 4 sized grid 0 seconds There are 252 paths in a 5 sized grid 0 seconds There are 924 paths in a 6 sized grid 0 seconds There are 3432 paths in a 7 sized grid 0 seconds There are 12870 paths in a 8 sized grid 0,001 seconds There are 48620 paths in a 9 sized grid 0,0010001 seconds There are 184756 paths in a 10 sized grid 0,001 seconds There are 705432 paths in a 11 sized grid 0 seconds There are 2704156 paths in a 12 sized grid 0 seconds There are 10400600 paths in a 13 sized grid 0,001 seconds There are 40116600 paths in a 14 sized grid 0 seconds There are 155117520 paths in a 15 sized grid 0 seconds There are 601080390 paths in a 16 sized grid 0,0010001 seconds There are 2333606220 paths in a 17 sized grid 0,001 seconds There are 9075135300 paths in a 18 sized grid 0,001 seconds There are 35345263800 paths in a 19 sized grid 0,001 seconds There are 137846528820 paths in a 20 sized grid 0,0010001 seconds 0,0390022 seconds in total I'm accepting danben's answer, because his helped me find this solution the most. But upvotes also to Tim Goodman and Agos :) Bonus update: After reading Eric Lippert's answer, I took another look and rewrote it somewhat. The basic idea is still the same but the caching part has been taken out and put in a separate function, like in Eric's example. The result is some much more elegant looking code. // the size of our grid const int gridSize = 20; // magic. static Func<A1, A2, R> Memoize<A1, A2, R>(this Func<A1, A2, R> f) { // Return a function which is f with caching. var dictionary = new Dictionary<string, R>(); return (A1 a1, A2 a2) => { R r; string key = a1 + "x" + a2; if (!dictionary.TryGetValue(key, out r)) { // not in cache yet r = f(a1, a2); dictionary.Add(key, r); } return r; }; } // calculate the surface of the block to the finish line static long calcsurface(long x, long y) { return (gridSize - x) * (gridSize - y); } // call using progress (0, 0) static Func<long, long, long> progress = ((Func<long, long, long>)((long x, long y) => { // first calculate the surface of the block remaining long surface = calcsurface(x, y); long i = 0; // zero surface means only 1 path remains // (we either go only right, or only down) if (surface == 0) return 1; // calculate it in the right direction if (x < gridSize) i += progress(x + 1, y); // and in the down direction if (y < gridSize) i += progress(x, y + 1); // self-explanatory :) return i; })).Memoize(); By the way, I couldn't think of a better way to use the two arguments as a key for the dictionary. I googled around a bit, and it seems this is a common solution. Oh well.

    Read the article

  • Please help with 'System.Data.DataRowView' does not contain a property with the name...

    - by Catalin
    My application works just fine until, in some unidentified conditions, it begins throwing this errors: When these errors start appearing, they appear in all over the application, no matter the code is built using ObjectDataSource or SqlDataSource. However, apparently, if the code uses some "classic", code-behind data-binding, that code does not throw errors (they do not show in the application event log), the page is displayed but it does not contain any data.... Please HELP tracking these very strange errors !!!!!! Here is the error log from the Event Viewer Exception information: Exception type: HttpUnhandledException Exception message: Exception of type 'System.Web.HttpUnhandledException' was thrown. Request information: Request URL: http://SITE/agsis/Default.aspx?tabid=1281&error=DataBinding5/7/2009 10:23:03 AMa+'System.Data.DataRowView'+does+not+contain+a+property+with+the+name+'DenumireMaterie'. Request path: /agsis/Default.aspx User host address: 299.299.299.299 ;) User: georgeta Is authenticated: True Authentication Type: Forms Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information: Thread ID: 1 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.errorpage_aspx.ProcessRequest(HttpContext context) at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride) Here is the error log from my application: AssemblyVersion: 04.05.01 PortalID: 18 PortalName: Stiinte Economice UserID: 85 UserName: georgeta ActiveTabID: 1281 ActiveTabName: Plan Invatamant RawURL: /agsis/Default.aspx?tabid=1281&error=DataBinding%3a+'System.Data.DataRowView'+does+not+contain+a+property+with+the+name+'DenumireMaterie'. AbsoluteURL: /agsis/Default.aspx AbsoluteURLReferrer: http://SITE/agsis/Default.aspx?tabid=1281&ctl=Login&returnurl=%2fagsis%2fDefault.aspx%3ftabid%3d1281%26ctl%3dNotePlanSemestru%26mid%3d2801%26ID_PlanSemestru%3d518%26ID_PlanInvatamant%3d304%26ID_FC%3d206%26ID_FCForma%3d85%26ID_Domeniu%3d418%26ID_AnStudiu%3d7%26ID_Specializare%3d6522%26ID_AnUniv%3d27 UserAgent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR={8C326639-C677-4045-B6D9-F59C330790E7}) DefaultDataProvider: DotNetNuke.Data.SqlDataProvider, DotNetNuke.SqlDataProvider ExceptionGUID: c56dc33e-973f-467a-a90d-2a8fc7193aec InnerException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'ID_PlanInvatamant'. FileName: FileLineNumber: 0 FileColumnNumber: 0 Method: System.Web.UI.DataBinder.GetPropertyValue StackTrace: Message: DotNetNuke.Services.Exceptions.PageLoadException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'ID_PlanInvatamant'. --- System.Web.HttpException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'ID_PlanInvatamant'. at System.Web.UI.DataBinder.GetPropertyValue(Object container, String propName) at System.Web.UI.WebControls.GridView.CreateChildControls(IEnumerable dataSource, Boolean dataBinding) at System.Web.UI.WebControls.CompositeDataBoundControl.PerformDataBinding(IEnumerable data) at System.Web.UI.WebControls.GridView.PerformDataBinding(IEnumerable data) at System.Web.UI.WebControls.DataBoundControl.OnDataSourceViewSelectCallback(IEnumerable data) at System.Web.UI.WebControls.DataBoundControl.PerformSelect() at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() at System.Web.UI.Control.EnsureChildControls() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- Source: Server Name: SERVER2 Thank you, Catalin

    Read the article

  • NHibernate many-to-many with composite element

    - by E1
    Hello everyone. I encountered the following problem. In my application uses the entities Owner and Area binding as many to many. public class Area : DomainObject<int> { private ISet<OwnersPeriod> _owners = new HashedSet<OwnersPeriod>(); public ICollection<OwnersPeriod> Owners { get { return _owners; } set { Check.Require(value != null); _owners = new HashedSet<OwnersPeriod>(value); } } } Table Owner2Area has the following fields: CREATE TABLE [dbo].[Owner2Area]( [ID] [int] IDENTITY(1,1) NOT NULL, [IDOwner] [int] NOT NULL, [IDArea] [int] NOT NULL, [FirstDate] [datetime] NOT NULL, [LastDate] [datetime] NULL, CONSTRAINT [PK_Owner2Area] PRIMARY KEY CLUSTERED) Therefore corresponds to the class OwnersPeriod public class OwnersPeriod { private Owner _member; private Area _area; public Owner Owner { get {...} set{...} } public Area Area { get { ... } set { ... } } public DateTime FirstDate { get; set; } public DateTime? LastDate { get; set; } } I wrote mappings <class lazy="false" name="Core.Domain.Area, Core" table="Areas"> ... <set name="Owners" table="Owner2Area" inverse="true" lazy="true" > <key column="IDArea"/> <composite-element class="Core.Domain.OwnersPeriod, Core" > <parent name="Area" /> <property name="FirstDate" type="datetime"/> <property name="LastDate" type="datetime"/> <many-to-one name="Owner" class="Core.Domain.Owner, Core" column="IDOwner"/> </composite-element> </set> </class> For each area existing data are successfully loaded into Owners, but when I add new record in Owner2Area through CreateSQLQuery, these data are not updated for instance of area. If I re-opened the form and got all areas, added link successfully loaded into the collection. How can be forced to load added thus recording of relation many-to-many? Nhibernate v.2.0.1, db MSSQL 2005

    Read the article

  • How do I merge a transient entity with a session using Castle ActiveRecordMediator?

    - by Daniel T.
    I have a Store and a Product entity: public class Store { public Guid Id { get; set; } public int Version { get; set; } public ISet<Product> Products { get; set; } } public class Product { public Guid Id { get; set; } public int Version { get; set; } public Store ParentStore { get; set; } public string Name { get; set; } } In other words, I have a Store that can contain multiple Products in a bidirectional one-to-many relationship. I'm sending data back and forth between a web browser and a web service. The following steps emulates the communication between the two, using session-per-request. I first save a new instance of a Store: using (new SessionScope()) { // this is data from the browser var store = new Store { Id = Guid.Empty }; ActiveRecordMediator.SaveAndFlush(store); } Then I grab the store out of the DB, add a new product to it, and then save it: using (new SessionScope()) { // this is data from the browser var product = new Product { Id = Guid.Empty, Name = "Apples" }); var store = ActiveRecordLinq.AsQueryable<Store>().First(); store.Products.Add(product); ActiveRecordMediator.SaveAndFlush(store); } Up to this point, everything works well. Now I want to update the Product I just saved: using (new SessionScope()) { // data from browser var product = new Product { Id = Guid.Empty, Version = 1, Name = "Grapes" }; var store = ActiveRecordLinq.AsQueryable<Store>().First(); store.Products.Add(product); // throws exception on this call ActiveRecordMediator.SaveAndFlush(store); } When I try to update the product, I get the following exception: a different object with the same identifier value was already associated with the session: 00000000-0000-0000-0000-000000000000, of entity:Product" As I understand it, the problem is that when I get the Store out of the database, it also gets the Product that's associated with it. Both entities are persistent. Then I tried to save a transient Product (the one that has the updated info from the browser) that has the same ID as the one that's already associated with the session, and an exception is thrown. However, I don't know how to get around this problem. If I could get access to a NHibernate.ISession, I could call ISession.Merge() on it, but it doesn't look like ActiveRecordMediator has anything similar (SaveCopy threw the same exception). Does anyone know the solution? Any help would be greatly appreciated!

    Read the article

  • practical security ramifications of increasing WCF clock skew to more than an hour

    - by Andrew Patterson
    I have written a WCF service that returns 'semi-private' data concerning peoples name, addresses and phone numbers. By semi-private, I mean that there is a username and password to access the data, and the data is meant to be secured in transit. However, IMHO noone is going to expend any energy trying to obtain the data, as it is mostly available in the public phone book anyway etc. At some level, the security is a bit of security 'theatre' to tick some boxes imposed on us by government entities. The client end of the service is an application which is given out to registered 'users' to run within their own IT setups. We have no control over the IT of the users - and in fact they often tell us to 'go jump' if we put too many requirements on their systems. One problem we have been encountering is numerous users that have system clocks that are not accurate. This can either be caused by a genuine slow/fast clocks, or more than likely a timezone or daylight savings zone error (putting their machine an hour off the 'real' time). A feature of the WCF bindings we are using is that they rely on the notion of time to detect replay attacks etc. <wsHttpBinding> <binding name="normalWsBinding" maxBufferPoolSize="524288" maxReceivedMessageSize="655360"> <reliableSession enabled="false" /> <security mode="Message"> <message clientCredentialType="UserName" negotiateServiceCredential="false" algorithmSuite="Default" establishSecurityContext="false" /> </security> </binding> </wsHttpBinding> The inaccurate client clocks cause security exceptions to be thrown and unhappy users. Other than suggesting users correct their clocks, we know that we can increase the clock skew of the security bindings. http://www.danrigsby.com/blog/index.php/2008/08/26/changing-the-default-clock-skew-in-wcf/ My question is, what are the real practical security ramifications of increasing the skew to say 2 hours? If an attacker can perform some sort of replay attack, why would a clock skew window of 5 minutes be necessarily safer than 2 hours? I presume performing any attack with security mode of 'message' requires more than just capturing some data at a proxy and sending the data back in again to 'replay' the call? In a situation like mine where data is only 'read' by the users, are there indeed any security ramifications at all to allowing 'replay' attacks?

    Read the article

  • Subversion vision and roadmap

    - by gbjbaanb
    Recently C Michael Pilato of the core subversion team posted a mail to the subversion dev mailing list suggesting a vision and roadmap for the future of Subversion. Naturally, he wanted as much feedback and response as possible which is why I'm posting this here - to elicit some suggestions and contributions from you, the users of Subversion. Any comments are welcome, and I shall feedback a synopsis with a link to this question to the dev mailing list. Similarly, I've created a post on ServerFault to get feedback from the administator side of things too. So, without further ado: Vision The first thing on his "vision statement" is: Subversion has no future as a DVCS tool. Let's just get that out there. At least two very successful such tools exist already, and to squeeze another horse into that race would be a poor investment of energy and talent. There's no need to suggest distributed features for subversion. If you want a DVCS, there should be no ill-feeling if you migrate to Git, Mercurial or Bazaar. As he says, its pointless trying to make SVN like them when they already exist, especially when there are different usage patterns that SVN should be targetting. The vision for Subversion is: Subversion exists to be universally recognized and adopted as an open-source, centralized version control system characterized by its reliability as a safe haven for valuable data; the simplicity of its model and usage; and its ability to support the needs of a wide variety of users and projects, from individuals to large-scale enterprise operations. Roadmap Several ideas were suggested as being "very nice to have" and are offered as the starting point of a future roadmap. These are: Obliterate Shelve/Checkpoint Repository-dictated Configuration Rename Tracking Improved Merging Improved Tree Conflict Handling Enterprise Authentication Mechanisms Forward History Searching Log Message Templates If anyone has suggestions to add, or comments on these, the subversion community would welcome all of them. Community And lastly, there was a call for more people to become involved with Subversion development. As with most OSS projects it can be daunting to join, but there is now a push for more to be done to help. If you feel like you can contribute, please do so.

    Read the article

  • How do you model roles / relationships with Domain Driven Design in mind?

    - by kitsune
    If I have three entities, Project, ProjectRole and Person, where a Person can be a member of different Projects and be in different Project Roles (such as "Project Lead", or "Project Member") - how would you model such a relationship? In the database, I currently have the following tablers: Project, Person, ProjectRole Project_Person with PersonId & ProjectId as PK and a ProjectRoleId as a FK Relationship. I'm really at a loss here since all domain models I come up with seem to break some "DDD" rule. Are there any 'standards' for this problem? I had a look at a Streamlined Object Modeling and there is an example what a Project and ProjectMember would look like, but AddProjectMember() in Project would call ProjectMember.AddProject(). So Project has a List of ProjectMembers, and each ProjectMember in return has a reference to the Project. Looks a bit convoluted to me. update After reading more about this subject, I will try the following: There are distinct roles, or better, model relationships, that are of a certain role type within my domain. For instance, ProjectMember is a distinct role that tells us something about the relationship a Person plays within a Project. It contains a ProjectMembershipType that tells us more about the Role it will play. I do know for certain that persons will have to play roles inside a project, so I will model that relationship. ProjectMembershipTypes can be created and modified. These can be "Project Leader", "Developer", "External Adviser", or something different. A person can have many roles inside a project, and these roles can start and end at a certain date. Such relationships are modeled by the class ProjectMember. public class ProjectMember : IRole { public virtual int ProjectMemberId { get; set; } public virtual ProjectMembershipType ProjectMembershipType { get; set; } public virtual Person Person { get; set; } public virtual Project Project { get; set; } public virtual DateTime From { get; set; } public virtual DateTime Thru { get; set; } // etc... } ProjectMembershipType: ie. "Project Manager", "Developer", "Adviser" public class ProjectMembershipType : IRoleType { public virtual int ProjectMembershipTypeId { get; set; } public virtual string Name { get; set; } public virtual string Description { get; set; } // etc... }

    Read the article

  • C# Design Questions

    - by guazz
    How to approach unit testing of private methods? I have a class that loads Employee data into a database. Here is a sample: public class EmployeeFacade { public Employees EmployeeRepository = new Employees(); public TaxDatas TaxRepository = new TaxDatas(); public Accounts AccountRepository = new Accounts(); //and so on for about 20 more repositories etc. public bool LoadAllEmployeeData(Employee employee) { if (employee == null) throw new Exception("..."); EmployeeRepository emps = new EmployeeRepository(); bool exists = emps.FetchExisting(emps.Id); if (!exists) { emps.AddNew(); } try { emps.Id = employee.Id; emps.Name = employee.EmployeeDetails.PersonalDetails.Active.Names.FirstName; emps.SomeOtherAttribute; } catch() {} try { emps.Save(); } catch(){} try { LoadorUpdateTaxData(employee.TaxData); } catch() {} try { LoadorUpdateAccountData(employee.AccountData); } catch() {} ... etc. for about 20 more other employee objects } private bool LoadorUpdateTaxData(employeeId, TaxData taxData) { if (taxData == null) throw new Exception("..."); ...same format as above but using AccountRepository } private bool LoadorUpdateAccountData(employee.TaxData) { ...same format as above but using TaxRepository } } I am writing an application to take serialised objects(e.g. Employee above) and load the data to the database. I have a few design question that I would like opinions on: A - I am calling this class "EmployeeFacade" because I am (attempting?) to use the facade pattern. Is it good practace to name the pattern on the class name? B - Is it good to call the concrete entities of my DAL layer classes "Repositories" e.g. "EmployeeRepository" ? C - Is using the repositories in this way sensible or should I create a method on the repository itself to take, say, the Employee and then load the data from there e.g. EmployeeRepository.LoadAllEmployeeData(Employee employee)? I am aim for cohesive class and but this will requrie the repository to have knowledge of the Employee object which may not be good? D - Is there any nice way around of not having to check if an object is null at the begining of each method? E - I have a EmployeeRepository, TaxRepository, AccountRepository declared as public for unit testing purpose. These are really private enities but I need to be able to substitute these with stubs so that the won't write to my database(I overload the save() method to do nothing). Is there anyway around this or do I have to expose them? F - How can I test the private methods - or is this done (something tells me it's not)? G- "emps.Name = employee.EmployeeDetails.PersonalDetails.Active.Names.FirstName;" this breaks the Law of Demeter but how do I adjust my objects to abide by the law?

    Read the article

  • How to make ASP.Net MVC checkboxes keep state

    - by myotherme
    I have the following situation: I have a class Product that can have a confirmation from various Stations. So I have a ViewModel that holds the Product information, and a list of stations, and all the ProductStationConfirmations. public class ProductViewModel { public Product Product { get; private set; } public List<Station> Stations { get; private set; } public Dictionary<string, ProductStationConfirmation> ProductStationConfirmations { get; private set; } public ProductViewModel(int productID) { // Loads everything from DB } } In my partial view for inserting/editing I iterate over the stations to make a checkbox for each of them: <div class="editor-label"> <%= Html.LabelFor(model => model.Product.Title)%> </div> <div class="editor-field"> <%= Html.TextBoxFor(model => model.Product.Title)%> <%= Html.ValidationMessageFor(model => model.Product.Title)%> </div> <fieldset> <legend>Station Confirmations</legend> <% foreach (var station in Model.Stations) { %> <div class="nexttoeachother"> <div> <%= Html.Encode(station.Name) %> </div> <div> <%= Html.CheckBox("confirm_"+station.ID.ToString(), Request["confirm_"+station.ID.ToString()] == null ? Model.ProductStationConfirmations.ContainsKey(Entities.ProductStationConfirmation.MakeHash(Model.Product.ID, station.ID)) : Request["confirm_" + station.ID.ToString()].Contains("true") ) %> </div> </div> <% } %> </fieldset> This works and I can process the Request values to store the confirmed Stations, but it is really messy. I made it this way to preserve the state of the checkboxes between round trips if there is a problem with the model (missing title, bad value for decimal, or something that can only be checked server-side like duplicate tile). I would expect that there is a nicer way to do this, I just don't know what it is. I suspect that I need to change the shape of my ViewModel to better accommodate the data, but i don't know how. I am using MVC 2.

    Read the article

  • Design question for WinForms (C#) app, using Entity Framework

    - by cdotlister
    I am planning on writing a small home budget application for myself, as a learning excercise. I have built my database (SQL Server), and written a small console application to interact with it, and test out scenarios on my database. Once I am happy, my next step would be to start building the application - but I am already wondering what the best/standard design would be. I am palnning on using Entity Framework for handling my database entities... then linq to sql/objects for getting the data, all running under a WinForms (for now) application. My plan (I've never used EF... and most of my development background is Web apps) is to have my database... with Entity Framework in it's own project.. which has the connection to the database. This project would expose methods such as 'GetAccount()', 'GetAccount(int accountId)' etc. I'd then have a service project that references my EF project. And on top of that, my GUI project, which makes the calls to my service project. But I am stuck. Lets say I have a screen that displays a list of Account types (Debit, Credit, Loan...). Once I have selected one, the next drop down shows a list of accounts I have that suite that account type. So, my OnChange event on my DropDown on the account type control will make a call to the serviceLayer project, 'GetAccountTypes()', and I would expect back a List< of Account Types. However, the AccountType object ... what is that? That can't be the AccountType object from my EF project, as my GUI project doesn't have reference to it. Would I have to have some sort of Shared Library, shared between my GUI and my Service project, with a custom built AccountType object? The GUI can then expect back a list of these. So my service layer would have a method: public List<AccountType> GetAccountTypes() That would then make a call to a custom method in my EF project, which would probably be the same as the above method, except, it returns an list of EF.Data.AccountType (The Entity Framework generated Account Type object). The method would then have the linq code to get the data as I want it. Then my service layer will get that object, and transform it unto my custom AccountType object, and return it to the GUI. Does that sound at all like a good plan?

    Read the article

  • How to optimize Core Data query for full text search

    - by dk
    Can I optimize a Core Data query when searching for matching words in a text? (This question also pertains to the wisdom of custom SQL versus Core Data on an iPhone.) I'm working on a new (iPhone) app that is a handheld reference tool for a scientific database. The main interface is a standard searchable table view and I want as-you-type response as the user types new words. Words matches must be prefixes of words in the text. The text is composed of 100,000s of words. In my prototype I coded SQL directly. I created a separate "words" table containing every word in the text fields of the main entity. I indexed words and performed searches along the lines of SELECT id, * FROM textTable JOIN (SELECT DISTINCT textTableId FROM words WHERE word BETWEEN 'foo' AND 'fooz' ) ON id=textTableId LIMIT 50 This runs very fast. Using an IN would probably work just as well, i.e. SELECT * FROM textTable WHERE id IN (SELECT textTableId FROM words WHERE word BETWEEN 'foo' AND 'fooz' ) LIMIT 50 The LIMIT is crucial and allows me to display results quickly. I notify the user that there are too many to display if the limit is reached. This is kludgy. I've spent the last several days pondering the advantages of moving to Core Data, but I worry about the lack of control in the schema, indexing, and querying for an important query. Theoretically an NSPredicate of textField MATCHES '.*\bfoo.*' would just work, but I'm sure it will be slow. This sort of text search seems so common that I wonder what is the usual attack? Would you create a words entity as I did above and use a predicate of "word BEGINSWITH 'foo'"? Will that work as fast as my prototype? Will Core Data automatically create the right indexes? I can't find any explicit means of advising the persistent store about indexes. I see some nice advantages of Core Data in my iPhone app. The faulting and other memory considerations allow for efficient database retrievals for tableview queries without setting arbitrary limits. The object graph management allows me to easily traverse entities without writing lots of SQL. Migration features will be nice in the future. On the other hand, in a limited resource environment (iPhone) I worry that an automatically generated database will be bloated with metadata, unnecessary inverse relationships, inefficient attribute datatypes, etc. Should I dive in or proceed with caution?

    Read the article

  • Cascade Saves with Fluent NHibernate AutoMapping - Old Anwser Still Valid?

    - by Glenn
    I want to do exactly what this question asks: http://stackoverflow.com/questions/586888/cascade-saves-with-fluent-nhibernate-automapping Using Fluent Nhibernate Mappings to turn on "cascade" globally once for all classes and relation types using one call rather than setting it for each mapping individually. The answer to the earlier question looks great, but I'm afraid that the Fluent Nhibernate API altered its .WithConvention syntax last year and broke the answer... either that or I'm missing something. I keep getting a bunch of name space not found errors relating to the IOneToOnePart, IManyToOnePart and all their variations: "The type or namespace name 'IOneToOnePart' could not be found (are you missing a using directive or an assembly reference?)" I've tried the official example dll's, the RTM dll's and the latest build and none of them seem to make VS 2008 see the required namespace. The second problem is that I want to use the class with my AutoPersistenceModel but I'm not sure where to this line: .ConventionDiscovery.AddFromAssemblyOf() in my factory creation method. private static ISessionFactory CreateSessionFactory() { return Fluently.Configure() .Database(SQLiteConfiguration.Standard.UsingFile(DbFile)) .Mappings(m => m.AutoMappings .Add(AutoMap.AssemblyOf<Shelf>(type => type.Namespace.EndsWith("Entities")) .Override<Shelf>(map => { map.HasManyToMany(x => x.Products).Cascade.All(); }) ) )//emd mappings .ExposeConfiguration(BuildSchema) .BuildSessionFactory();//finalizes the whole thing to send back. } Below is the class and using statements I'm trying using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; using FluentNHibernate.Conventions; using FluentNHibernate.Cfg; using FluentNHibernate.Cfg.Db; using NHibernate; using NHibernate.Cfg; using NHibernate.Tool.hbm2ddl; using FluentNHibernate.Mapping; namespace TestCode { public class CascadeAll : IHasOneConvention, IHasManyConvention, IReferenceConvention { public bool Accept(IOneToOnePart target) { return true; } public void Apply(IOneToOnePart target) { target.Cascade.All(); } public bool Accept(IOneToManyPart target) { return true; } public void Apply(IOneToManyPart target) { target.Cascade.All(); } public bool Accept(IManyToOnePart target) { return true; } public void Apply(IManyToOnePart target) { target.Cascade.All(); } } }

    Read the article

  • Web Safe Area (optimal resolution) for web app design

    - by M.A.X
    I'm in the process of designing a new web app and I'm wondering for what 'web safe area' should I optimize the app layout and design. I did some investigation and thinking on my own but wanted to share this to see what the general opinion is. Here is what I found: Optimal Display Resolution: w3schools web stats seems to be the most referenced source (however they state that these are results from their site and is biased towards tech savvy users) http://www.w3counter.com/globalstats.php (aggregate data from something like 15,000 different sites that use their tracking services) StatCounter Global Stats Display Resolution (Stats are based on aggregate data collected by StatCounter on a sample exceeding 15 billion pageviews per month collected from across the StatCounter network of more than 3 million websites) NetMarketShare Screen Resolutions (marketshare.hitslink.com) (a web analytics consulting firm, they get data from browsers of site visitors to their on-demand network of live stats customers. The data is compiled from approximately 160 million visitors per month) Display Resolution Summary: There is a bit of variation between the above sources but in general as of Jan 2011 looks like 1024x768 is about 20%, while ~85% have a higher resolution of at least 1280x768 (1280x800 is the most common of these with 15-20% of total web, depending on the source; 1280x1024 and 1366x768 follow behind with 9-14% of the share). My guess would be that the higher resolution values will be even more common if we filter on North America, and even higher if we filter on N.American corporate users (unfortunately I couldn't find any free geographically filtered statistics). Another point to note is that the 1024x768 desktop user population is likely lower than the aforementioned 20%, seeing as the iPad (1024x768 native display) is likely propping up those number. My recommendation would be to optimize around the 1280x768 constraint (*note: 1280x768 is actually a relatively rare resolution, but I think it's a valid constraint range considering that 1366x768 is relatively common and 1280 is the most common horizontal resolution). Browser + OS Constraints: To further add to the constraints we have to subtract the space taken up by the browser (assuming IE, which is the most space consuming) and the OS (assuming WinXP-Win7): Win7 has the biggest taskbar footprint at a height of 40px (XP's and Vista's is 30px) The default IE8 view uses up 25px at the bottom of the screen with the status bar and a further 120px at the top of the screen with the windows title bar and the browser UI (assuming the default 'favorites' toolbar is present, it would instead be 91px without the favorites toolbar). Assuming no scrollbar, we also loose a total of 4px horizontally for the window outline. This means that we are left with 583px of vertical space and 1276px of horizontal. In other words, a Web Safe Area of 1276 x 583 Is this a correct line of thinking? I tried to Google some design best practices but most still talk about designing around 1024x768 which seems to be quickly disappearing. Any help on this would be greatly appreciated! Thanks.

    Read the article

  • NOOB Memory Problem - EXC_BAD_ACCESS (OBJ-C/iPhone)

    - by Michael Bordelon
    I have been banging my head against the wall for a couple days and need some help. I have a feeling that I am doing something really silly here, but I cannot find the issue. This is the controller for a table view. I put the SQL in line to simplify it as part of the troubleshooting of this error. Normally, it would be in an accessor method in a model class. It gets through the SQL read just fine. Finds the two objects, loads them into the todaysWorkout array and then builds the cells for the table view. The table view actually comes up on the scree and then it throws the EXC_BAD_ACCESS. I ran instruments and it shows the following: 0 CFString Malloc 1 00:03.765 0x3946470 176 Foundation -[NSPlaceholderString initWithFormat:locale:arguments:] 1 CFString Autorelease 00:03.765 0x3946470 0 Foundation NSRecordAllocationEvent 2 CFString CFRelease 0 00:03.767 0x3946470 0 Bring It -[WorkoutViewController viewDidLoad] 3 CFString Zombie -1 00:03.917 0x3946470 0 Foundation NSPopAutoreleasePool Here is the source code for the controller. I left it all in there just in case there is something extraneous causing the problem. I sincerely appreciate any help I can get: HEADER: #import <UIKit/UIKit.h> #import <sqlite3.h> #import "NoteCell.h" #import "BIUtility.h" #import "Bring_ItAppDelegate.h" #import "MoveListViewController.h" @class MoveListViewController; @class BIUtility; @interface WorkoutViewController : UITableViewController { NSMutableArray *todaysWorkouts; IBOutlet NoteCell *woNoteCell; MoveListViewController *childController; NSInteger scheduleDay; BIUtility *bi; } @property (nonatomic, retain) NSMutableArray *todaysWorkouts; @property (nonatomic, retain) NoteCell *woNoteCell; @property (nonatomic,retain) BIUtility *bi; //@property (nonatomic, retain) SwitchCell *woSwitchCell; @end CLASS: #import "WorkoutViewController.h" #import "MoveListViewController.h" #import "Profile.h" static sqlite3 *database = nil; @implementation WorkoutViewController @synthesize todaysWorkouts; @synthesize woNoteCell; @synthesize bi; //@synthesize woSwitchCell; - (void)viewDidLoad { [super viewDidLoad]; bi = [[BIUtility alloc] init]; todaysWorkouts = [[NSMutableArray alloc] init]; NSString *query; sqlite3_stmt *statement; //open the database if (sqlite3_open([[BIUtility getDBPath] UTF8String], &database) != SQLITE_OK) { sqlite3_close(database); NSAssert(0, @"Failed to opendatabase"); } query = [NSString stringWithFormat:@"SELECT IWORKOUT.WOINSTANCEID, IWORKOUT.WORKOUTID, CWORKOUTS.WORKOUTNAME FROM CWORKOUTS JOIN IWORKOUT ON IWORKOUT.WORKOUTID = CWORKOUTS.WORKOUTID AND DATE = '%@'", [BIUtility todayDateString]]; if (sqlite3_prepare_v2(database, [query UTF8String], -1, &statement, nil) == SQLITE_OK) { while (sqlite3_step(statement) == SQLITE_ROW) { Workout *wo = [[Workout alloc] init]; wo.woInstanceID = sqlite3_column_int(statement, 0); wo.workoutID = sqlite3_column_int(statement, 1); wo.workoutName = [NSString stringWithUTF8String:(char *)sqlite3_column_text(statement, 2)]; [todaysWorkouts addObject:wo]; [wo release]; } sqlite3_finalize(statement); } if(database) sqlite3_close(database); [query release]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { //todaysWorkouts = [BIUtility todaysScheduledWorkouts]; static NSString *noteCellIdentifier = @"NoteCellIdentifier"; UITableViewCell *cell; if (indexPath.section < ([todaysWorkouts count])) { cell = [tableView dequeueReusableCellWithIdentifier:@"OtherCell"]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier: @"OtherCell"] autorelease]; cell.accessoryType = UITableViewCellAccessoryNone; } if (indexPath.row == 0) { Workout *wo = [todaysWorkouts objectAtIndex:indexPath.section]; [cell.textLabel setText:wo.workoutName]; } else { [cell.textLabel setText:@"Completed?"]; [cell.textLabel setFont:[UIFont fontWithName:@"Arial" size:15]]; [cell.textLabel setTextColor:[UIColor blueColor]]; } } else { cell = (NoteCell *)[tableView dequeueReusableCellWithIdentifier:noteCellIdentifier]; if (cell == nil) { NSArray *nib = [[NSBundle mainBundle] loadNibNamed:@"NoteCell" owner:self options:nil]; cell = [nib objectAtIndex:0]; } } return cell; //[cell release]; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSUInteger row = [indexPath row]; if (indexPath.section < ([todaysWorkouts count]) && (row == 0)) { MoveListViewController *moveListController = [[MoveListViewController alloc] initWithStyle:UITableViewStylePlain]; moveListController.workoutID = [[todaysWorkouts objectAtIndex:indexPath.section] workoutID]; moveListController.workoutName = [[todaysWorkouts objectAtIndex:indexPath.section] workoutName]; moveListController.woInstanceID = [[todaysWorkouts objectAtIndex:indexPath.section] woInstanceID]; NSLog(@"Workout Selected: %@", [[todaysWorkouts objectAtIndex:indexPath.section] workoutName]); Bring_ItAppDelegate *delegate = [[UIApplication sharedApplication] delegate]; [delegate.workoutNavController pushViewController:moveListController animated:YES]; } else { UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; if (indexPath.section < ([todaysWorkouts count]) && (row == 1)) { if (cell.accessoryType == UITableViewCellAccessoryNone) { cell.accessoryType = UITableViewCellAccessoryCheckmark; } else { cell.accessoryType = UITableViewCellAccessoryNone; } } } [tableView deselectRowAtIndexPath:indexPath animated:YES]; } - (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath { NSInteger h = 35; return h; } - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return ([todaysWorkouts count] + 1); //return ([todaysWorkouts count]); } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { if (section < ([todaysWorkouts count])) { return 2; } else { return 1; } } - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { if (section < ([todaysWorkouts count])) { return @"Workout"; } else { return @"How Was Your Workout?"; } } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [todaysWorkouts release]; [bi release]; [super dealloc]; } @end

    Read the article

  • Entity Framework in n-layered application - Lazy loading vs. Eager loading patterns

    - by Marconline
    Hi all. This questions doesn't let me sleep as it's since one year I'm trying to find a solution but... still nothing happened in my mind. Probably you can help me, because I think this is a very common issue. I've a n-layered application: presentation layer, business logic layer, model layer. Suppose for simplicity that my application contains, in the presentation layer, a form that allows a user to search for a customer. Now the user fills the filters through the UI and clicks a button. Something happens and the request arrives to presentation layer to a method like CustomerSearch(CustomerFilter myFilter). This business logic layer now keeps it simple: creates a query on the model and gets back results. Now the question: how do you face the problem of loading data? I mean business logic layer doesn't know that that particular method will be invoked just by that form. So I think that it doesn't know if the requesting form needs just the Customer objects back or the Customer objects with the linked Order entities. I try to explain better: our form just wants to list Customers searching by surname. It has nothing to do with orders. So the business logic query will be something like: (from c in ctx.CustomerSet where c.Name.Contains(strQry) select c).ToList(); now this is working correctly. Two days later your boss asks you to add a form that let you search for customers like the other and you need to show the total count of orders created by each customer. Now I'd like to reuse that query and add the piece of logic that attach (includes) orders and gets back that. How would you front this request? Here is the best (I think) idea I had since now. I'd like to hear from you: my CustomerSearch method in BLL doesn't create the query directly but passes through private extension methods that compose the ObjectQuery like: private ObjectQuery<Customer> SearchCustomers(this ObjectQuery<Customer> qry, CustomerFilter myFilter) and private ObjectQuery<Customer> IncludeOrders(this ObjectQuery<Customer> qry) but this doesn't convince me as it seems too complex. Thanks, Marco

    Read the article

  • Am I using EJBs properly?

    - by kgrad
    I am using a JEE6 stack including JPA 2.0, JSF 2.0, EJB 3.1 etc. The way my architecture is setup is the following: I have JPA annotated DAOs using hibernate as my JPA provider. I have JSF Managed beans which correspond to my facelet/xhtml pages. I have EJBs that handle all of my database requests. My XHTML pages have JSF EL which make calls to my Managed beans. My managed beans contain references to my DAO entities which are managed by EJBs. For example, I have a user entity which is mapped to a db table. I have a user EJB which handles all CRUD operations that return Users. I have a page that edits a user. The highlevel workflow would be: navigate to user edit page - EL calls a method located in the managed bean that loads a user. The method calls userEJB.loadUser(user) from the EJB to get the user from the database. The user is edited and submit - a function is called in the managed bean which calls a function in the EJB to save the user. etc. I am running into issues accessing my data within my JSF pages using EJBs. I am having a lot of problems with lazy initialization errors, which I believe is due to how I have set things up. For example, I have a Client entity that has a List of users which are lazily loaded. In order to get a client I call a method in my EJB which goes to the database, finds a client and returns it. Later on i wish to access this clients list of users, in order to do so i have to go back to the EJB by calling some sort of method in order to load those users (since they are lazily loaded). This means that I have to create a method such as public List<User> getUserListByClient(Client c) { c = em.merge(c); return c.getUserList(); } The only purpose of this method is to load the users (and I'm not even positive this approach is good or works). If i was doing session management myself, I would like just leave the session open for the entire request and access the property directly, this would be fine as the session would be open anyway, there seems to be this one extra layer of indirection in EJBs which is making things difficult for me. I do like EJBs as I like the fact that they are controlled by the container, pooled, offer transaction management for free etc. However, I get the feeling that I am using them incorrectly, or I have set up my JSF app incorrectly. Any feedback would be greatly appreciated. thanks,

    Read the article

  • Return pre-UPDATE column values in PostgreSQL without using triggers, functions or other "magic"

    - by Python Larry
    I have a related question, but this is another part of MY puzzle. I would like to get the OLD VALUE of a Column from a Row that was UPDATEd... WITHOUT using Triggers (nor Stored Procedures, nor any other extra, non-SQL/-query entities). The query I have is like this: UPDATE my_table SET processing_by = our_id_info -- unique to this instance WHERE trans_nbr IN ( SELECT trans_nbr FROM my_table GROUP BY trans_nbr HAVING COUNT(trans_nbr) > 1 LIMIT our_limit_to_have_single_process_grab ) RETURNING row_id If I could do "FOR UPDATE ON my_table" at the end of the subquery, that'd be devine (and fix my other question/problem). But, that won't work: can't have this AND a "GROUP BY" (which is necessary for figuring out the COUNT of trans_nbr's). Then I could just take those trans_nbr's and do a query first to get the (soon-to-be-) former processing_by values. I've tried doing like: UPDATE my_table SET processing_by = our_id_info -- unique to this instance FROM my_table old_my_table JOIN ( SELECT trans_nbr FROM my_table GROUP BY trans_nbr HAVING COUNT(trans_nbr) > 1 LIMIT our_limit_to_have_single_process_grab ) sub_my_table ON old_my_table.trans_nbr = sub_my_table.trans_nbr WHERE my_table.trans_nbr = sub_my_table.trans_nbr AND my_table.processing_by = old_my_table.processing_by RETURNING my_table.row_id, my_table.processing_by, old_my_table.processing_by But that can't work; "old_my_table" is not viewable outside of the join; the RETURNING clause is blind to it. I've long since lost count of all the attempts I've made; I have been researching this for literally hours. If I could just find a bullet-proof way to lock the rows in my subquery - and ONLY those rows, and WHEN the subquery happens - all the concurrency issues I'm trying to avoid disappear... UPDATE: [WIPES EGG OFF FACE] Okay, so I had a typo in the non-generic code of the above that I wrote "doesn't work"; it does... thanks to Erwin Brandstetter, below, who stated it would, I re-did it (after a night's sleep, refreshed eyes, and a banana for bfast). Since it took me so long/hard to find this sort of solution, perhaps my embarrassment is worth it? At least this is on SO for posterity now... : What I now have (that works) is like this: UPDATE my_table SET processing_by = our_id_info -- unique to this instance FROM my_table AS old_my_table WHERE trans_nbr IN ( SELECT trans_nbr FROM my_table GROUP BY trans_nbr HAVING COUNT(*) > 1 LIMIT our_limit_to_have_single_process_grab ) AND my_table.row_id = old_my_table.row_id RETURNING my_table.row_id, my_table.processing_by, old_my_table.processing_by AS old_processing_by The COUNT(*) is per a suggestion from Flimzy in a comment on my other (linked above) question. (I was more specific than necessary. [In this instance.])

    Read the article

  • Multiple views and source list in a Core Data app

    - by Ellie P.
    I'm working on my first major Cocoa app for an undergraduate research project. The application is document-based and uses Core Data. One of the entities is an abstract entity, Page. Page is parent of several types of pages: ie PageWithHeaderAndFooter, PageWithTwoColumns, BasicPage etc. Page has attributes, such as title and author, that all pages have in common. Each specific type of page has a certain number of layout blocks (PageWithHeaderAndFooter has three: header, footer, body. BasicPage has one: body. etc.) Additionally, all Page subclasses define layout-specific implementations of certain methods. The other relevant entity is Style, which defines the visual look of a Page. (Think of Pages as HTML and Style as CSS.) I would like my app to have an iTunes/Mail-like source list with sections. (One section would be Pages, the other would be Styles.) I have a pretty good idea how to do the sectioned source list (this was a great help). However, after hours of headbanging and fruitless googling, here's what I can't figure out: Pages and Styles listed in the source list, and when you select one of them, all of the relevant fields for that object appear at the right (mostly NSTextViews, pop up menus, etc). I laid that out and did all of the bindings in Interface Builder. The problem is, if my source list contains different types of pages, how do I get a different view to display at the right depending on the type of page selected? For example, if a BasicPage is selected, I want just what you see above: the general page stuff and one NSTextView that corresponds to the one field body of BasicPage. But if I select a PageWithHeaderAndFooter, I want to display the general page stuff plus three NSTextViews (one for header, body, and footer.) If I have a Style selected, I want to display various pop up menus, color wells, etc. For the pages at least, we're only talking about one or more NSTextViews, each of which corresponds to a String attribute of the respective entity. How would you do this? Thank you for your help!

    Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >