Search Results

Search found 13259 results on 531 pages for 'design'.

Page 495/531 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

• The SmartAssembly Rearchitecture

  - by Simon Cooper

  You may have noticed that not a lot has happened to SmartAssembly in the past few months. However, the team has been very busy behind the scenes working on an entirely new version of SmartAssembly. SmartAssembly 6.5 Over the past few releases of SmartAssembly, the team had come to the realisation that the current 'architecture' - grown organically, way before RedGate bought it, from a simple name obfuscator over the years into a full-featured obfuscator and assembly instrumentation tool - was simply not up to the task. Not for what we wanted to do with it at the time, and not what we have planned for the future. Not only was it not up to what we wanted it to do, but it was severely limiting our development capabilities; long-standing bugs in the root architecture that couldn't be fixed, some rather...interesting...design decisions, and convoluted logic that increased the complexity of any bugfix or new feature tenfold. So, we set out to fix this. Earlier this year, a new engine was written on which SmartAssembly would be based. Over the following few months, each feature was ported over to the new engine and extensively tested by our existing unit and integration tests. The engine was linked into the existing UI (no easy task, due to the tight coupling between the UI and old engine), and existing RedGate products were tested on the new SmartAssembly to ensure the new engine acted in the same way. The result is SmartAssembly 6.5. The risks of a rearchitecture Are there risks to rearchitecting a product like SmartAssembly? Of course. There was a lot of undocumented behaviour in the old engine, and as part of the rearchitecture we had to find this behaviour, define it, and document it. In the process we found some behaviour of the old engine that simply did not make sense; hence the changes in pruning & obfuscation behaviour in the release notes. All the special edge cases we had to find, document, and re-implement. There was a chance that these special cases would not be found until near the end of the project, when everything is functionally complete and interacting together. By that stage, it would be hard to go back and change anything without a whole lot of extra work, delaying the release by months. We always knew this was a possibility; our initial estimate of the time required was '4 months, ± 4 months'. And that was including various mitigation strategies to reduce the likelihood of these issues being found right at the end. Fortunately, this worst-case did not happen. However, the rearchitecture did produce some benefits. As well as numerous bug fixes that we could not fix any other way, we've also added logging that lets you find out exactly why a particular field or property wasn't pruned or obfuscated. There's a new command line interface, we've tested it with WP7.1 and Silverlight 5, and we've added a new option to error reporting to improve the performance of instrumented apps by ~10%, at the cost of inaccurate line numbers in reports. So? What differences will I see? Largely none. SmartAssembly 6.5 produces the same output as SmartAssembly 6.2. The performance of 6.5 will be much faster for some users, and generally the same as 6.2 for the remaining. If you've encountered a bug with previous versions of SmartAssembly, I encourage you to try 6.5, as it has most likely been fixed in the rearchitecture. If you encounter a bug with 6.5, please do tell us; we'll be doing another release quite soon, so we'll aim to fix any issues caused by 6.5 in that release. Most importantly, the new architecture finally allows us to implement some Big Things with SmartAssembly we've been planning for many months; these will fundamentally change how you build, release and monitor your application. Stay tuned for further updates!

  Read the article

• Moving the Oracle User Experience Forward with the New Release 7 Simplified UI for Oracle Sales Cloud

  - by mvaughan

  By Kathy Miedema, Oracle Applications User ExperienceIn September 2013, Release 7 for Oracle Cloud Applications became generally available for Oracle Sales Cloud and HCM Cloud. This significant release allowed the Oracle Applications User Experience (UX) team to finally talk freely about Simplified UI, a user experience project in the works since Oracle OpenWorld 2012. Simplified UI represents the direction that the Oracle user experience – for all of its enterprise applications – is heading. Oracle’s Apps UX team began by building a Simplified UI for sales representatives. You can find that today in Release 7, and it was demoed extensively during OpenWorld 2013 in San Francisco. This screenshot shows how Opportunities appear in the new Simplified UI for Oracle Sales Cloud, a user interface built for sales reps.Analyst Rebecca Wettemann, vice president of Nucleus Research, saw Simplified UI at Oracle Openworld 2013 and talked about it with CRM Buyer in “Oracle Revs Its Cloud Engines for a Better Customer Experience.” Wettemann said there are distinct themes to the latest release: "One is usability. Oracle Sales Cloud, for example, is designed to have zero training for onboarding sales reps, which it does," she explained. "It is quite impressive, actually -- the intuitive nature of the application and the design work they have done with this goal in mind."The software uses as few buttons and fields as possible, she pointed out. "The sales rep doesn't have to ask, 'what is the next step?' because she can see what it is."In fact, there are three themes driving the usability that Wettemann noted. They are simplicity, mobility, and extensibility, and we write more about them on the Usable Apps web site. These three themes embody the strategy for Oracle’s cloud applications user experiences.  Simplified UI for Oracle Sales CloudIn developing a Simplified UI for Oracle Sales Cloud, Oracle’s UX team concentrated on the tasks that sales reps need to do most frequently, and are most important. “Knowing that the majority of their work lives are spent on the road and on the go, they need to be able to quickly get in and qualify and convert their leads, monitor and progress their opportunities, update their customer and contact information, and manage their schedule,” Jeremy Ashley, Vice President of the Applications UX team, said.Ashley said the Apps UX team has a good reason for creating a Simplified UI that focuses on self-service. “Sales people spend the day selling stuff,” he said. “The only reason they use software is because the company wants to track what they’re doing.” Traditional systems of tracking that information include filling in a spreadsheet of leads or sales. Oracle wants to automate this process for the salesperson, and enable that person to keep everyone who needs to know up-to-date easily and quickly. Simplified UI addresses that problem by providing light-touch input.  “It has to be useful to the salesperson,” Ashley said about the Sales Cloud user experience. Simplified UI can tell sales reps about key opportunities, or provide information about a contact in just a click or two. Customer information is accessible quickly and easily with Simplified UI for the Oracle Sales Cloud.Simplified UI for Sales Cloud can also be extended easily, Ashley said. Users usually just need to add various business fields or create and modify analytical reports. The way that Simplified UI is constructed allows extensibility to happen by hiding or showing a few necessary fields. The Settings user interface, starting in release 7, allows for the simple configuration of the most important visual elements. “With Sales cloud, we identified a need to make the application useful and very simple,” Ashley said. Simplified UI meets that need. Where can you find out more?To find out more about the simplified UI and Oracle’s ongoing investment in applications user experience innovations, come to one of our sessions at a user group conference near you. Stay tuned to the Voice of User Experience (VoX) blog – the next post will be about Simplified UI and HCM Cloud.

  Read the article

• Old School Wizardry Tip: Batch File Comments

  - by jkauffman

  Johnny, the Endangered Keyboard-Driven Windows User Some of my proudest, obscure Windows tricks are losing their relevance. I know I’m not alone. Keyboard shortcuts are going the way of the dodo. I used to induce fearful awe by slapping Ctrl+Shift+Esc in front of the lowly, pedestrian Windows users. No windows key on the keyboard? No problem: Ctrl+Esc. No menu key on the keyboard: Shift+F10. I am also firmly planted in the habit of closing windows with the Alt+Space menu (Alt+Space, C); and I harbor a brooding, slow=growing list of programs that fail to support this correctly (that means you, Paint.NET). Every time a new version of windows comes out, the support for some of these minor time-saving habits get pared out. Will I complain publicly? Nope, I know my old ways should be axed to conserve precious design energy. In fact, I disapprove of fierce un-intuitiveness for the sake of alleged productivity. Like vim, for example. If you approach a program after being away for 5 years, having to recall encyclopedic knowledge is a flaw. The RTFM disciples have lost. Anyway, some of the items in my arsenal of goofy time-saving tricks are still relevant today. I wanted to draw attention to one that’s stood the test of time. Remember Batch Files? Yes, it’s true, batch files are fading faster than the world of print. But they're not dead yet. I still run into some situations where I opt to use batch files. They are still relevant for build processes, or just various development workflow tools. Sure, there’s powershell, but there’s that stupid Set-ExecutionPolicy speed bump standing in your way; can you really spare the time to A) hunt down that setting on all machines affected and/or B) make futile efforts to convince your coworkers/boss that the hassle was worth it? When possible, I prefer the batch file wild card. And whenever I return to batch files, I end up researching some of the unintuitive aspects such as parameters, quote handling, and ERRORLEVEL. But I never have to remember to use “REM” for comment lines, because there’s a cleaner way to do them! Double Colon For Eye-Friendly Comments Here is a very simple batch file, with pretty much minimal content: @ECHO OFF SETLOCAL REM This is a comment ECHO This batch file doesn’t do much If you code on a daily basis, this may be more suitable to your eyes: @ECHO OFF SETLOCAL :: This is a comment ECHO This batch file doesn’t do much Works great! I imagine I find it preferable due to the similarity to comments in other situations: // or ;  or # I’ve often make visual pseudo-line breaks in my code, and this colon-based syntax works wonders: @ECHO OFF SETLOCAL :: Do stuff ECHO Doing Stuff :::::::::::::::::::::::::::: :: Do more stuff ECHO This batch file doesn’t do much Not only is it more readable, but there’s a slight performance benefit. The batch file engine sees this as an invalid line label and immediately reads the following line. Use that fact to your advantage if this trick leads you into heated nerd debate. Two Pitfalls to Avoid Be aware of that there are a couple situations where this hack will fail you. It most likely won’t be a problem unless you’re getting really sophisticated with your batch files. Pitfall #1: Inline comments @ECHO OFF SETLOCAL IF EXIST C:\SomeFile.txt GOTO END ::This will fail :END Unfortunately, this fails. You can only have whitespace to the left of your comments. Pitfall #2: Code Blocks @ECHO OFF SETLOCAL IF EXIST C:\SomeFile.txt (         :: This will fail         ECHO HELLO ) Code blocks, such as if statements and for loops, cannot contain these comments. This is ultimately due to the fact that entire code blocks are processed as a single line. I originally learned this from Rob van der Woude’s site. He goes into more depth about the behavior of the pitfalls as well, if you are interested in further details. I hope this trick earns you serious geek rep!

  Read the article

• Normalisation and 'Anima notitia copia' (Soul of the Database)

  - by Phil Factor

  (A Guest Editorial for Simple-Talk) The other day, I was staring  at the sys.syslanguages  table in SQL Server with slightly-raised eyebrows . I’d just been reading Chris Date’s  interesting book ‘SQL and Relational Theory’. He’d made the point that you’re not necessarily doing relational database operations by using a SQL Database product.  The same general point was recently made by Dino Esposito about ASP.NET MVC.  The use of ASP.NET MVC doesn’t guarantee you a good application design: It merely makes it possible to test it. The way I’d describe the sentiment in both cases is ‘you can hit someone over the head with a frying-pan but you can’t call it cooking’. SQL enables you to create relational databases. However,  even if it smells bad, it is no crime to do hideously un-relational things with a SQL Database just so long as it’s necessary and you can tell the difference; not only that but also only if you’re aware of the risks and implications. Naturally, I’ve never knowingly created a database that Codd would have frowned at, but around the edges are interfaces and data feeds I’ve written  that have caused hissy fits amongst the Normalisation fundamentalists. Part of the problem for those who agonise about such things  is the misinterpretation of Atomicity.  An atomic value is one for which, in the strange virtual universe you are creating in your database, you don’t have any interest in any of its component parts.  If you aren’t interested in the electrons, neutrinos,  muons,  or  taus, then  an atom is ..er.. atomic. In the same way, if you are passed a JSON string or XML, and required to store it in a database, then all you need to do is to ask yourself, in your role as Anima notitia copia (Soul of the database) ‘have I any interest in the contents of this item of information?’.  If the answer is ‘No!’, or ‘nequequam! Then it is an atomic value, however complex it may be.  After all, you would never have the urge to store the pixels of images individually, under the misguided idea that these are the atomic values would you?  I would, of course,  ask the ‘Anima notitia copia’ rather than the application developers, since there may be more than one application, and the applications developers may be designing the application in the absence of full domain knowledge, (‘or by the seat of the pants’ as the technical term used to be). If, on the other hand, the answer is ‘sure, and we want to index the XML column’, then we may be in for some heavy XML-shredding sessions to get to store the ‘atomic’ values and ensure future harmony as the application develops. I went back to looking at the sys.syslanguages table. It has a months column with the months in a delimited list January,February,March,April,May,June,July,August,September,October,November,December This is an ordered list. Wicked? I seem to remember that this value, like shortmonths and days, is treated as a ‘thing’. It is merely passed off to an external  C++ routine in order to format a date in a particular language, and never accessed directly within the database. As far as the database is concerned, it is an atomic value.  There is more to normalisation than meets the eye.

  Read the article

• SQL Sentry Truth-Telling and Disk Configuration

  - by AjarnMark

  Recently, SQL Sentry told me something about my SQL Server disk configurations that I just didn’t want to believe, but alas, it was true. Several days ago I posted my First Impressions of the SQL Sentry Power Suite.  Today’s post could fall into the category of, “Hey, as long as you have that fancy tool…”  Unfortunately, it also falls into the category of an overloaded worker taking someone else’s word for the truth, not verifying it with independent fact-checking, and then making decisions based on that.  Here’s my story… I’m not exactly an Accidental DBA (or Involuntary DBA as Paul Randal calls it).  I came to this company five years ago as a lead application developer with extensive experience in database design and development.  I worked my way into management, and along the way, took over the DBA responsibilities.  Fortunately, our systems run pretty smoothly most of the time, but I’m always looking for ways to make them better and to fit into my understanding of best practices.  When I took over as DBA, I inherited a SQL 2000 server with about 30 databases on it supporting our main systems, and a SQL 2005 server with multiple instances.  Both of these servers were configured with the Operating System and Application files on the C drive, data files on a different drive letter, and log files on a third drive letter.  Even before I took over as DBA, I verified that this was true with a previous server administrator, and that these represented actual separate disks.  He stated that they did, and I thought that all was well. Then one day, I’m poking around inside the SQL Sentry Performance Advisor, checking out features as I am evaluating whether to purchase the product, and I come across a Disk Configuration section.  The first thing I notice is that the drives do not have the proper partition offset, which was not at all surprising to me given the age of the installation and the relative newness of that topic.  But what threw me for a loop was that the graphic display appeared to be telling me that I did not in fact have three separate drives (or arrays) but rather had two, and that the log files were merely on a separate volume on the same physical array as the OS.  I figured that I must be reading it wrong so I scanned the Help file, but that just seemed to confirm my interpretation.  Then I thought, “there must be something wrong with the demo version of the software!  This can’t be right!”  But just to double-check, I went to our current server admin to talk it over with him, and sure enough, SQL Sentry was telling the truth! I was stunned!  I quickly went through the grieving process…denial…anger…reconciliation.  Here was something that I thought was such a basic truth that was turned upside down.  OK, granted, this wasn’t disastrous.  Our databases didn’t suddenly grind to a halt.  I didn’t get calls late at night inquiring about the sudden downturn in performance.  But it was a bit of a shock to the system, in a good way, to jolt me out of taking what I had believed as the truth for granted, and instead to Trust, but Verify! Yes, before someone else points it out, I know that there are”free” disk management tools built-in to Windows that would have told me the same thing if I had only looked at them; I did not have to buy a fancy tool to tell me that, but the fact is, until I was evaluating the tool, I had just gone with what I was told, and never bothered to check what was actually there. So, what things do you believe to be true but you actually never verified?

  Read the article

• #iPad at One Week: A Great Device Made with a Heavy Hand

  - by andrewbrust

  I have now had my iPad for a little over a week. In that time, Apple introduced the world to its iPhone OS 4 (and the SDK agreement’s draconian new section 3.3.1), HP introduced is Slate, and Microsoft got ready to launch Visual Studio 2010 and .NET 4.0. And through it all I have used my iPad. I've used it for email, calendar, controlling my Sonos, and writing an essay. I've used it for getting on TripIt and Twitter, and surfing the Web. I've used it for online banking, and online ordering and delivery of food. And the verdict? Honestly? I think it's a great device and I thoroughly enjoy using it. The screen is bright and vibrant. I am surprisingly fast and accurate when I type on it. The touch screen's responsiveness is nearly flawless. The software, including a number of third party applications, include pleasing animations and use of color that make it fun to get work done. And speaking of work, the Exchange integration is, dare I say it, robust. Not as full-featured as on a PC or Windows Mobile device, but still offering core functionality and, so far at least, without bugs. The UI is intuitive, not just to me, but also to my 5 1/2 year old, and also to my nearly-3-year-old son. They picked it up and, with just just a few pointers from me, they almost immediately knew what to do, whether they were looking at photos (and swiping/flicking along as they did so), using a drawing program, playing a game, or watching YouTube videos. The younger of the two of them even tried to get up on a chair and grab the thing today. He dropped it, from about 4 feet off the ground. And it's still fine. (Meanwhile, I'll be keeping it on a higher shelf.) I cannot fully describe yet what makes this form factor and this product so appealing. Maybe it's that it's an always-on device. Maybe it's just being able to hold such a nice, relatively large display so close. Maybe it's the design sensibility, that seems to pervade throughout the app ecosystem. Or maybe it's that one's fingers, and not pens or mice, are the software's preferred input device. Whatever the attraction, it's strong. And no matter how much I tend to root for Microsoft and against Apple, Cupertino has, in my mind, scored big, Can Microsoft compete? Yes, but not with the Windows 7 standard UI (nor with individual OEMs’ own UIs on top). I hope Microsoft builds a variant of the Windows Phone 7 specifically for tablet devices. And I hope they make it clear that all developers, and programming languages, are welcome to the platform. Once that’s established, the OEMs have to build great hardware with fast, responsive touch screens, under Microsoft's watchful eye. That may be the hardest part of getting this right. No matter what, Microsoft's got a fight on its hands. I don't know if it can count on winning that fight, either. But Silverlight and Live Tiles could certainly help. And so can treating developers like adults.  Apple seems intent on treating their devs like kids, and then giving the kids a curfew.  For that, dev-friendly Microsoft may one day give thanks.

  Read the article

• Silverlight Cream for February 06, 2011 -- #1042

  - by Dave Campbell

  In this Issue: Mike Taulty, Timmy Kokke, Laurent Bugnion, Arik Poznanski, Deyan Ginev, Deborah Kurata(-2-), Johnny Tordgeman, Roy Dallal, Jaime Rodriguez, Samuel Jack(-2-), James Ashley. Above the Fold: Silverlight: "Customizing Silverlight properties for Visual Designers" Timmy Kokke WP7: "Back button press when using webbrowser control in WP7" Jaime Rodriguez Expression Blend: "Blend Bits 21–Importing from Photoshop & Illustrator…" Mike Taulty From SilverlightCream.com: Blend Bits 21–Importing from Photoshop & Illustrator… Mike Taulty is up to 21 episodes on his Blend Bits sequence now, and this one is about using Blend's import capability, such as a .psd file with all the layers intact. Customizing Silverlight properties for Visual Designers Timmy Kokke has part 1 of 2 parts on making your Silverlight control properties in design surfaces such as Visual Studio designer or Expression Blend. An error when installing MVVM Light templates for VS10 Express Laurent Bugnion has released a new version of MVVMLight that resolves a problem with VS2010 Express version of the templates... no problem with anything else. Reading RSS items on Windows Phone 7 Arik Poznanski has a post up about reading RSS on a WP7, but better yet, he also has code for a helper class that you can grab, plus explanation of wiring it up. Integrating your Windows Phone unit tests with MSBuild #4: The WP7 Unit Test Application Deyan Ginev has a post up about Telerik's WP7 test app that outputs test results in XML from the emulator so they can be integrated with the MSBuild log. Accessing Data in a Silverlight Application: EF I apprently missed this post by Deborah Kurata last week on bringing data into your Silverlight app via Entity Frameworks... good detailed tutorial in VB and C#. Updating Data in a Silverlight Application: EF In Deborah Kurata's latest post, she is continuing with Entity Frameworks by demonstrating updating to the database... full source code will be produced in a later post. Fun with Silverlight and SharePoint 2010 Ribbon Control - Part 2 - An In Depth Look At The Ribbon Control Johnny Tordgeman has Part 2 of his Silverlight and Sharepoint 2010 Ribbon up... taking a deep-dive into the ribbon... great explanation of the attributes, code included. Geographic Coordinates Systems Roy Dallal has some Geo code up that's not necessarily Silverlight, but very cool if you're doing any GIS programming... ya gotta know the coordinate systems! Back button press when using webbrowser control in WP7 Jaime Rodriguez has a post up discussing the much-lamented back-button action in the certification requirements and how to deal with that in a web browser app. Multiplayer-enabling my Windows Phone 7 game: Day 1 Samuel Jack challenged himself to build a WP7 game in 3 days... now he's challenging himself to make it multiplayer in 3 days... this first hour-to-hour post is research of networking and an azure server-side solution. Multiplayer-enabling my Windows Phone 7 game: Day 2–Building a UI with XPF Day 2 for Samuel Jack getting the multiplayer portion of his game working in 3 days.. this day involves getting up-to-speed with XPF. How to Hotwire your WP7 Phone Battery Did you realize if you run your WP7 battery completely down that you can't charge it? James Ashley reports that circumstance, and how he resolved it. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• My Experience at Oracle !!! By Ayush Gupta

  - by Nadiya

  Normal 0 false false false EN-US X-NONE X-NONE Hi! My name is Ayush, a Gratuate from BITS Pilani and now working and living in Bangalore. I joined Oracle in August 2013 as a Senior Consultant (SC) and would like to share my experiences over the first couple of months with you.It has been a wonderful journey so far. The last two months have been very exciting for me. First of all I would like to mention that the training program at Oracle that we went through really prepared us well. It matured us and allowed us to go from developing small applications in college to big enterprise products. Two months of initial training has had a lasting impact for me. I am also really enjoying the knowledge I have gained so far and also learning new things in the form of product training. It's really fun to work here. We are treated like adults and we are responsible for our own workloads.With that I can't keep from mentioning the fun times we as a team have in the form of Young Leadership programme in Hotel Fortune Trinity which included Luxurious buffet lunch too. Wishing it could happen more frequently.  Oracle provides one of the best opportunities to learn various technologies across different platforms. What I like best about working at Oracle is the work life balance. With the option of flexible timings, one can easily enjoy planned evenings with friends or maybe working out at the fitness centre in your building. Be it the birthday celebrations at office or the day long team outing at a resort, It’s all together a different experience. Overall, you get to take full ownership of your project and they give you a free leash on how you design your enhancements/changes.As one of the largest international companies, Oracle is obviously an expert on exploring the potential and possibility of inexperienced new hires. We were taught how to make an outstanding team work in a group training session at the first few weeks. From this experience I realized that perfect cooperation is not about where you come from or what your study background is, everyone can find his or her own role to support the team. Even though I am not that skilled in technology, my background has significantly helped me in learning new technologies in Oracle.My idea and suggestion is: for new joiners, the will to learn is be more important than what you have learnt before. Colleagues here at Oracle are professionals in their field, always friendly and glad to help. So don’t worry, all you need to do is just be confident, and have a nice attitude, Oracle will let you fully display your talent. Come and join us, here you can always find a tailor made role for you! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Dissing Architects, or "What's wrong with the coffee?"

  - by Bob Rhubart

  In my conversations with people in architect roles, tales of animosity, disrespect, and outright hostility aren't uncommon. And it's clear that in more than a few organizations architects regularly face a tough uphill climb. For architects with the requisite combination of technical, organizational, and people skills, that rough treatment is grossly undeserved. But tales of unqualified people in positions up and down the IT food chain are also easy to come by. So what's the other side of the architect story? Are some architects tarnishing the role and making life miserable for their more qualified colleagues? The various quotes included below were culled from a variety of sources. The criticism is harsh, and the people behind these quotes clearly have issues with architects. Still, whether based on mere opinion or actual experience, the comments shed some light on behaviors that should raise red flags for anyone pursuing a career as an architect. If you're an architect, and you've ever noticed that your coffee tastes like window cleaner, or your car is repeatedly keyed, or no one ever holds the elevator for you, maybe you need to do a little soul searching... Those Who Can, Code; Those Who Can't, Architect | Joe Winchester [May 18, 2007] "At the moment there seems to be an extremely unhealthy obsession in software with the concept of architecture. A colleague of mine, a recent graduate, told me he wished to become a software architect. He was drawn to the glamour of being able to come up with grandiose ideas - sweeping generalized designs, creating presentations to audiences of acronym addicts, writing esoteric academic papers, speaking at conferences attended by headless engineers on company expense accounts hungrily seeking out this year's grail, and creating e-mails with huge cc lists from people whose signature footer is more interesting than the content. I tried to re-orient him into actually doing some coding, to join a team that has a good product and keen users both of whom are pushing requirements forward, to no avail. Somehow the lure of being an architecture astronaut was too strong and I lost him to the dark side." Don't Let Architecture Astronauts Scare You | Joel Spolsky [April 21, 2001] "It's very hard to get them to write code or design programs, because they won't stop thinking about Architecture. They're astronauts because they are above the oxygen level, I don't know how they're breathing. They tend to work for really big companies that can afford to have lots of unproductive people with really advanced degrees that don't contribute to the bottom line. Remember that the architecture people are solving problems that they think they can solve, not problems which are useful to solve." Non Coding Architects Suck | Richard Henderson [May 24, 2010] "If a guy with a badge saying 'system architect' looks blank on low-level issues then he is not an architect, he is a business-analyst who went on a course. He will probably wax lyrical on all things high-level and 'important.' He will produce lovely object hierarchies without a clue to implementation. He will have a moustache and play golf." Architects Play Golf | Sunir Shah [August 15, 2012] "Often arrogant architects are difficult to get a hold of during the implementation phase because they no longer feel the need to stick around. Especially around midnight when most of the poor sob [sic] developers are still banging away. After all, they've already solved the problem--the rest is just an implementation exercise." Engineer vs Architect(Part of a discussion on the IT Architect Network Group on LinkedIn) "[An] architect spends his time producing white papers full of acronyms he does not understand but that impress his boss [while the] engineer keeps his head down and does the actual job." Architects Don't Code | [Author Unknown] "Faulty belief: System Architects don't need to code anymore. They know what they are talking about by virtue of the fact that they are System Architects."

  Read the article

• Live Event: OTN Architect Day: Cloud Computing - Two weeks and counting

  - by Bob Rhubart

  In just two weeks architects and others will gather at the Oracle Conference Center in Redwood Shores, CA for the first Oracle Technology Network Architect Day event of 2013. This event focuses on Cloud Computing, and features sessions specifically focused on real-world examples of the implementation of cloud computing. When: Tuesday July 9, 2013              8:30am - 12:30pm Where: Oracle Conference Center              350 Oracle Pkwy              Redwood City, CA 94065 Register now. It's free! Here's the agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Michael Timpanaro-Perrotta Director, Product Management, Oracle Database Cloud New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Michael Timpanaro-Perrotta respond to audience questions. Registration is free, but seating is limited, so register now.

  Read the article

• Live Event: OTN Architect Day: Cloud Computing - Two weeks and counting

  - by Bob Rhubart

  In just two weeks architects and others will gather at the Oracle Conference Center in Redwood Shores, CA for the first Oracle Technology Network Architect Day event of 2013. This event focuses on Cloud Computing, and features sessions specifically focused on real-world examples of the implementation of cloud computing. When: Tuesday July 9, 2013              8:30am - 12:30pm Where: Oracle Conference Center              350 Oracle Pkwy              Redwood City, CA 94065 Register now. It's free! Here's the agenda: 8:30am - 9:00am Registration and Continental Breakfast 9:00am - 9:45am Keynote 21st Century IT | Dr. James Baty VP, Global Enterprise Architecture Program, Oracle Imagine a time long, long ago. A time when servers were certified and dedicated to specific applications, when anything posted on an enterprise web site was from restricted, approved channels, and when we tried to limit the growth of 'dirty' data and storage. Today, applications are services running in the muti-tenant hybrid cloud. Companies beg their customers to tweet them, friend them, and publicly rate their products. And constantly analyzing a deluge of Internet, social and sensor data is the key to creating the next super-successful product, or capturing an evil terrorist. The old IT architecture was planned, dedicated, stable, controlled, with separate and well-defined roles. The new architecture is shared, dynamic, continuous, XaaS, DevOps. This keynote session describes the challenges and opportunities that the new business / IT paradigms present to the IT architecture and architects. 9:45am - 10:30am Technical Session Oracle Cloud: A Case Study in Building a Cloud | Anbu Krishnaswami Enterprise Architect, Oracle Building a Cloud can be challenging thanks to the complex requirements unique to Cloud computing and the massive scale typically associated with Cloud. Cloud providers can take an Infrastructure as a Service (IaaS) approach and build a cloud on virtualized commodity hardware, or they can take the Platform as a Service (PaaS) path, a service-oriented approach based on pre-configured, integrated, engineered systems. This presentation uses the Oracle Cloud itself as a case study in the use of engineered systems, demonstrating how the technical design of engineered systems is leveraged for building PaaS and SaaS Cloud services and a Cloud management infrastructure. The presentation will also explore the principles, patterns, best practices, and architecture views provided in Oracle's Cloud reference architecture. 10:30 am -10:45 am Break 10:45am-11:30am Technical Session Database as a Service | Michael Timpanaro-Perrotta Director, Product Management, Oracle Database Cloud New applications are now commonly built in a Cloud model, where the database is consumed as a service, and many established business processes are beginning to migrate to database as a service (DBaaS). This adoption of DBaaS is made possible by the availability of new capabilities in the database that enable resource pooling, dynamic resource management, model-based provisioning, metered use, and effective quality-of-service controls. This session will examine the catalog of database services at a large commercial bank to understand how these capabilities are enabling DBaaS for a wide range of needs within the enterprise. 11:30 am - 12:00 pm Panel Q&A Dr. James Baty, Anbu Krishnaswami, and Michael Timpanaro-Perrotta respond to audience questions. Registration is free, but seating is limited, so register now.

  Read the article

• SQL Azure: Notes on Building a Shard Technology

  - by Herve Roggero

  In Chapter 10 of the book on SQL Azure (http://www.apress.com/book/view/9781430229612) I am co-authoring, I am digging deeper in what it takes to write a Shard. It's actually a pretty cool exercise, and I wanted to share some thoughts on how I am designing the technology. A Shard is a technology that spreads the load of database requests over multiple databases, as transparently as possible. The type of shard I am building is called a Vertical Partition Shard  (VPS). A VPS is a mechanism by which the data is stored in one or more databases behind the scenes, but your code has no idea at design time which data is in which database. It's like having a mini cloud for records instead of services. Imagine you have three SQL Azure databases that have the same schema (DB1, DB2 and DB3), you would like to issue a SELECT * FROM Users on all three databases, concatenate the results into a single resultset, and order by last name. Imagine you want to ensure your code doesn't need to change if you add a new database to the shard (DB4). Now imagine that you want to make sure all three databases are queried at the same time, in a multi-threaded manner so your code doesn't have to wait for three database calls sequentially. Then, imagine you would like to obtain a breadcrumb (in the form of a new, virtual column) that gives you a hint as to which database a record came from, so that you could update it if needed. Now imagine all that is done through the standard SqlClient library... and you have the Shard I am currently building. Here are some lessons learned and techniques I am using with this shard: Parellel Processing: Querying databases in parallel is not too hard using the Task Parallel Library; all you need is to lock your resources when needed Deleting/Updating Data: That's not too bad either as long as you have a breadcrumb. However it becomes more difficult if you need to update a single record and you don't know in which database it is. Inserting Data: I am using a round-robin approach in which each new insert request is directed to the next database in the shard. Not sure how to deal with Bulk Loads just yet... Shard Databases:  I use a static collection of SqlConnection objects which needs to be loaded once; from there on all the Shard commands use this collection Extension Methods: In order to make it look like the Shard commands are part of the SqlClient class I use extension methods. For example I added ExecuteShardQuery and ExecuteShardNonQuery methods to SqlClient. Exceptions: Capturing exceptions in a multi-threaded code is interesting... but I kept it simple for now. I am using the ConcurrentQueue to store my exceptions. Database GUID: Every database in the shard is given a GUID, which is calculated based on the connection string's values. DataTable. The Shard methods return a DataTable object which can be bound to objects.  I will be sharing the code soon as an open-source project in CodePlex. Please stay tuned on twitter to know when it will be available (@hroggero). Or check www.bluesyntax.net for updates on the shard. Thanks!

  Read the article

• Oracle Social Network Developer Challenge: Fishbowl Solutions

  - by Kellsey Ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. Today, I give you the final entry in the Oracle Social Network Developer Challenge, held last week during OpenWorld. This one comes from Friend of the ‘Lab and Fishbowl Solutions (@fishbowle20) hacker, John Sim (@jrsim_uix), whom you might remember from his XBox Kinect demo at COLLABORATE 12 (presentation slides and abstract) hacks and other exploits with WebCenter. We put this challenge together specifically for developers like John, who like to experiment with new tools and push the envelope of what’s possible and build cool things, and as you can see from his entry John did just that, mashing together Google Maps and Oracle Social Network into a mobile app built with PhoneGap that uses the device’s camera and GPS to keep teams on the move in touch. He calls it a Mobile GeoTagging Solution, but I think Avengers Assemble! would have equally descriptive, given that was obviously his inspiration. Here’s his description of the mobile app: My proposed solution was to design and simplify GeoLocation mapping, and automate updates for users and teams on the move; who don’t have access to a laptop or want to take their ipads out – but allow them to make quick updates to OSN and upload photos taken from their mobile device – there and then. As part of this; the plan was to include a rules engine that could be configured by the user to allow the device to automatically update and post messages when they arrived at a set location(s). Inspiration for this came from on{x} – automate your life. Unfortunately, John didn’t make it to the conference to show off his hard work in person, but luckily, he had a colleague from Fishbowl and a video to showcase his work.    Here are some shots of John’s mobile app for your viewing pleasure: John’s thinking is sound. Geolocation is usually relegated to consumer use cases, thanks to services like foursquare, but distributed teams working on projects out in the world definitely need a way to stay in contact. Consider a construction job. Different contractors all converge on a single location, and time is money. Rather than calling or texting each other and risking a distracted driving accident, an app like John’s allows everyone on the job to see exactly where the other contractors are. Using his GPS rules, they could easily be notified about how close each is to the site, definitely useful when you have a flooring contractor sitting idle, waiting for an electrician to finish the wiring. The best part is that the project manager or general contractor could stay updated on all the action (or inaction) using Oracle Social Network, either sitting at a desk using the browser app or desktop client or on the go, using one of the native mobile apps built for Oracle Social Network. I can see this being used by insurance adjusters too, and really any team that, erm, assembles at a given spot. Of course, it’s also useful for meeting at the pub after the day’s work is done. Beyond people, this solution could also be implemented for physical objects that are in route to a destination. Say you’re a customer waiting on rail shipment or a package delivery. You could track your valuable’s whereabouts easily as they report their progress via checkins. If they deviated from the GPS rules, you’d be notified. You might even be able to get a picture into Oracle Social Network with some light hacking. Thanks to John and his colleagues at Fishbowl for participating in our challenge. We hope everyone had a good experience. Make sure to check out John’s blog post on his work and the experience using Oracle Social Network. Although this is the final, official entry we had, tomorrow, I’ll show you the work of someone who finished code, but wasn’t able to make the judging event. Stay tuned.

  Read the article

• What Counts For A DBA: ESP

  - by Louis Davidson

  Now I don’t want to get religious here, and I’m not going to, but what I’m going to describe in this ‘What Counts for a DBA’ installment sometimes feels like magic. Often  I will spend hours thinking about the solution to a design issue or coding problem, working diligently to try to come up with a solution and then finally just give up with the feeling that I’m not even qualified to be a data entry clerk, much less a data architect.  At this point I often take a walk (or sometimes a nap), and then it hits me. I realize that I have the answer just sitting in my brain, ready to implement.  This phenomenon is not limited to walks either; it can happen almost any time after I stop my obsession about a problem. I call this phenomena ESP (or Extra-Sensory Programming.)  Another term for this could be ‘sleeping on it’, and while the idiom tends to mean to let time pass to actively think about a problem, sleeping on a problem also lets you relax and let your brain do the work. I first noticed this back in my college days when I would play video games for hours on end. We would get stuck deep in some dungeon unable to find a way out, playing for days on end until we were beaten down tired. Once we gave up and walked away, the solution would usually be there waiting for one of us before we came back to play the next day.  Sometimes it would be in the form of a dream, and sometimes it would just be that the problem was now easy to solve when we started to play again.  While it worked great for video games, it never occurred when I studied English Literature for hours on end, or even when I worked for the same sort of frustrating hours attempting to solve a homework problem in Calculus.  I believe that the difference was that I was passionate about the video game, and certainly far less so about homework where people used the word “thou” instead of “you” or x to represent a number. This phenomenon occurs somewhat more often in my current work as a professional data programmer, because I am very passionate about SQL and love those aspects of my career choice.  Every day that I get to draw a new data model to solve a customer issue, or write a complex SELECT statement to ferret out the answer to a complex data question, is a great day. I hope it is the same for any reader of this blog.  But, unfortunately, while the day on a whole is great, a heck of a lot of noise is generated in work life. There are the typical project deadlines, along with the requisite project manager sitting on your shoulders shouting slogans to try to make you to go faster: Add in office politics, and the occasional family issues that permeate the mind, and you lose the ability to think deeply about any problem, not to mention occasionally forgetting your own name.  These office realities coupled with a difficult SQL problem staring at you from your widescreen monitor will slowly suck the life force out of your body, making it seem impossible to solve the problem This is when the walk starts; or a nap. Maybe you hide from the madness under your desk like George Costanza hides from Steinbrenner on Seinfeld.  Forget about the problem. Free your mind from the insanity of the problem and your surroundings. Then let your training and education deep in your brain take over and see if it will passively do the rest for you. If you don’t end up with a solution, the worst case scenario is that you have a bit of exercise or rest, and you won’t have heard the phrase “better is the enemy of good enough” even once…which certainly will do your brain some good. Once you stop expecting whipping your brain for information, inspiration may just strike and instead of a humdrum solution you find a solution you hadn’t even considered, almost magically. So, my beloved manager, next time you have an urgent deadline and you come across me taking a nap, creep away quietly because I’m working, doing some extra-sensory programming.

  Read the article

• Drinking Our Own Champagne: Fusion Accounting Hub at Oracle

  - by Di Seghposs

  A guest post by Corey West, Senior Vice President, Oracle's Corporate Controller and Chief Accounting Officer There's no better story to tell than one about Oracle using its own products with blowout success. Here's how this one goes. As you know, Oracle has increased its share of the software market through a number of high-profile acquisitions. Legally combining companies is a very complicated process -- it can take months to complete, especially for the acquisitions with offices in several countries, each with its own unique laws and regulations. It's a mission critical and time sensitive process to roll an acquired company's legacy systems (running vital operations, such as accounts receivable and general ledger (GL)) into the existing systems at Oracle. To date, we've run our primary financial ledgers in E-Business Suite R12 -- and we've successfully met the requirements of the business and closed the books on time every single quarter. But there's always room for improvement and that comes in the form of Fusion Applications. We are now live on Fusion Accounting Hub (FAH), which is the first critical step in moving to a full Fusion Financials instance. We started with FAH so that we could design a global chart of accounts. Eventually, every transaction in every country will originate from this global chart of accounts -- it becomes the structure for managing our business more uniformly. In conjunction, we're using Oracle Hyperion Data Relationship Management (DRM) to centralize and automate governance of our global chart of accounts and related hierarchies, which will help us lower our costs and greatly reduce risk. Each month, we have to consolidate data from our primary general ledgers. We have been able to simplify this process considerably using FAH. We can now submit our primary ledgers running in E-Business Suite (EBS) R12 directly to FAH, eliminating the need for more than 90 redundant consolidation ledgers. Also we can submit incrementally, so if we need to book an adjustment in a primary ledger after close, we can do so without re-opening it and re-submitting. As a result, we have earlier visibility to period-end actuals during the close. A goal of this implementation, and one that we successfully achieved, is that we are able to use FAH globally with no customization. This means we have the ability to fully deploy ledger sets at the consolidation level, plus we can use standard functionality for currency translation and mass allocations. We're able to use account monitoring and drill down functionality from the consolidation level all the way through to EBS primary ledgers and sub-ledgers, which allows someone to click through a transaction appearing at the consolidation level clear through to its original source, a significant productivity enhancement when doing research. We also see a significant improvement in reporting using Essbase cube and Hyperion Smart View. Specifically, "the addition of an Essbase cube on top of the GL gives us tremendous versatility to automate and speed our elimination process," says Claire Sebti, Senior Director of Corporate Accounting at Oracle. A highlight of this story is that FAH is running in a co-existence environment. Our plan is to move to Fusion Financials in steps, starting with FAH. Next, our Oracle Financial Services Software subsidiary will move to a full Fusion Financials instance. Then we'll replace our EBS instance with Fusion Financials. This approach allows us to plan in steps, learn as we go, and not overwhelm our teams. It also reduces the risk that comes with moving the entire instance at once. Maria Smith, Vice President of Global Controller Operations, is confident about how they've positioned themselves to uptake more Fusion functionality and is eager to "continue to drive additional efficiency and cost savings." In this story, the happy customers are Oracle controllers, financial analysts, accounting specialists, and our management team that get earlier access to more flexible reporting. "Fusion Accounting Hub simplifies our processes and gives us more transparency into account activity," raves Alex SanJuan, Senior Director, Record to Report Strategic Process Owner. Overall, the team has been very impressed with the usability and functionality of FAH and are pleased with the quantifiable improvements. Claire Sebti states, "Our WD5 close activities have been reduced by at least four hours of system processing time, just for the consolidation group." Fusion Accounting Hub is an inspiring beginning to our Fusion Financials implementation story. There's no doubt it's going to be an international bestseller! Corey West, Senior Vice President Oracle's Corporate Controller and Chief Accounting Officer

  Read the article

• Using the Script Component as a Conditional Split

  This is a quick walk through on how you can use the Script Component to perform Conditional Split like behaviour, splitting your data across multiple outputs. We will use C# code to decide what does flows to which output, rather than the expression syntax of the Conditional Split transformation. Start by setting up the source. For my example the source is a list of SQL objects from sys.objects, just a quick way to get some data: SELECT type, name FROM sys.objects type name S syssoftobjrefs F FK_Message_Page U Conference IT queue_messages_23007163 Shown above is a small sample of the data you could expect to see. Once you have setup your source, add the Script Component, selecting Transformation when prompted for the type, and connect it up to the source. Now open the component, but don’t dive into the script just yet. First we need to select some columns. Select the Input Columns page and then select the columns we want to uses as part of our filter logic. You don’t need to choose columns that you may want later, this is just the columns used in the script itself. Next we need to add our outputs. Select the Inputs and Outputs page.You get one by default, but we need to add some more, it wouldn’t be much of a split otherwise. For this example we’ll add just one more. Click the Add Output button, and you’ll see a new output is added. Now we need to set some properties, so make sure our new Output 1 is selected. In the properties grid change the SynchronousInputID property to be our input Input 0, and  change the ExclusionGroup property to 1. Now select Ouput 0 and change the ExclusionGroup property to 2. This value itself isn’t important, provided each output has a different value other than zero. By setting this property on both outputs it allows us to split the data down one or the other, making each exclusive. If we left it to 0, that output would get all the rows. It can be a useful feature allowing you to copy selected rows to one output whilst retraining the full set of data in the other. Now we can go back to the Script page and start writing some code. For the example we will do a very simple test, if the value of the type column is U, for user table, then it goes down the first output, otherwise it ends up in the other. This mimics the exclusive behaviour of the conditional split transformation. public override void Input0_ProcessInputRow(Input0Buffer Row) { // Filter all user tables to the first output, // the remaining objects down the other if (Row.type.Trim() == "U") { Row.DirectRowToOutput0(); } else { Row.DirectRowToOutput1(); } } The code itself is very simple, a basic if clause that determines which of the DirectRowToOutput methods we call, there is one for each output. Of course you could write a lot more code to implement some very complex logic, but the final direction is still just a method call. If we now close the script component, we can hook up the outputs and test the package. Your numbers will vary depending on the sample database but as you can see we have clearly split out input data into two outputs. As a final tip, when adding the outputs I would normally rename them, changing the Name in the Properties grid. This means the generated methods follow the pattern as do the path label shown on the design surface, making everything that much easier to recognise.

  Read the article

• Build-time dependency resolving coming to Entity Framework. Now, how about those BI tools too?

  - by jamiet

  Three months ago I wrote a blog post entitled Some thoughts on Visual Studio database references and how they should be used for SQL Server BI where I shared some thoughts on a feature available to database developers in Visual Studio 2010 that I would love to see added to SQL Server Integration Services (SSIS), Analysis Services (SSAS) and Reporting Services (SSRS). In there I said: Over the past few weeks I have been making heavy use of the Database tools in Visual Studio 2010 and one of the features that has most impressed me has been database references.   Database references allow you to have stored procedures in your database project that refer to objects (tables, views, stored procedures etc…) that exist in other database projects and hence when you build your database project it is able to resolve those references.   It occurred to me that similar functionality would be incredibly useful for SQL Server Integration Services(SSIS), Analysis Services (SSAS) & Reporting Services (SSRS) projects. After all reports, packages and data source views are rife with references to database objects – why shouldn’t we be able to have design-time dependency checking in our BI projects the same way that database and .Net developers do? In that blog post I shared links to three Connect submissions where I requested this feature be added to SSIS, SSAS & SSRS. In addition I also submitted a request that the feature be extended to .Net projects so that any reference to a database object in a .Net assembly can be resolved at build time. That Connect submission is at [Entity FX] Use database references to constrain the EDM and overnight it received this comment from Microsoft: We have been working on this feature for a while and and will be available soon This is really good news - it improves the Microsoft developer ecosystem by ensuring invalid references to database references get caught at build time (ideally as part of a Continuous integration build) rather than run time. [Hopefully it might nip this code-first nonsense in the bud too (Ooo...way to incite flame comments :) ) ]. If you want to see this feature in action then check out a video from Teched Europe last month entitled SQL Server Developer Tools Code-named "Juneau" where it is demo'd by Lance Delano and Tim Laverty.   The point of this blog post though is not just to draw attention to this forthcoming feature for .Net developers, it is to ask you to petition Microsoft to get this feature added to SSIS/SSAS/SSRS too. After all, we already know (from the video above) that the feature is coming to this new code-name Juneau development environment plus we also know that Juneau will be the development environment for SSIS/SSAS/SSRS as well - is it really much of a stretch to expect the BI tools to have access to this great feature too? I don't think so and if you agree with me then I urge you to vote and add a comment to the Connection submissions that are requesting this feature. They are at: [SSAS] Declare Object Dependancies [SSRS] Declare Object Dependancies [SSIS] Declare Object Dependancies (Update, Apparently someone at Microsoft has deemed it necassary to set this to private and I am not able to change it back even though I submitted it. You can still vote on the other two though.) Let's close that SQL Developer Gap!   @Jamiet    

  Read the article

• WebCenter Innovation Award Winners

  - by Michael Snow

  Of course, here on our WebCenter blog – we’d like to highlight and brag about our great WebCenter winners. The 2012 WebCenter Innovation Award Winners University of Louisville Location: Louisville, KY, USA Industry: Higher Education Fusion Middleware Products: WebCenter Portal, WebCenter Content, JDeveloper, WebLogic, Oracle BI, Oracle IdM University of Louisville is a state supported research university Statewide Informatics Network to improve public health The University of Louisville has implemented WebCenter as part of the LOUI (Louisville Informatics Institute) Initiative, a Statewide Informatics Network, which will improve public healthcare and lower cost through the use of novel technology and next generation analytics, decision support and innovative outcomes-based payment systems. ---------- News Limited Country/Region: Australia Industry: News/Media FMW Products: WebCenter Sites Single platform running websites for 50% of Australia's newspapers News Corp is running half of Australia's newspaper websites on this shared platform powered by Oracle WebCenter Sites and have overtaken their nearest competitors and are now leading in terms of monthly page impressions. At peak they have over 250 editors on the system publishing in real-time.Sites include: www.newsspace.com.au, www.news.com.au, www.theaustralian.com.au and many others ------ Life Technologies Corp. Country/Region: Carlsbad, CA, USAIndustry: Life SciencesFMW Products: WebCenter Portal, SOA Suite Life Technologies Corp. is a global biotechnology tools company dedicated to improving the human condition with innovative life science products. They were awarded an innovation award for their solution utilizing WebCenter Portal for remotely monitoring & repairing biotech instruments. They deployed WebCenter as a portal that accesses Life Technologies cloud based service monitoring system where all customer deployed instruments can be remotely monitored and proactively repaired.  The portal provides alerts from these cloud based monitoring services directly to the customer and to Life Technologies Field Engineers.  The Portal provides insight into the instruments and services customers purchased for the purpose of analyzing and anticipating future customer needs and creating targeted sales and service programs. ----- China Mobile Jiangsu China Mobile Jiangsu is one of the biggest subsidiaries of China Mobile. It has over 25,000 employees and 40 million mobile subscribers. Country/Region: Jiangsu, China Industry: Telecommunications FMW Products: WebCenter Portal, WebCenter Content, JDeveloper, SOA Suite, IdM They were awarded an Innovation Award for their new employee platform powered by WebCenter Portal is designed to serve their 25,000+ employees and help them drive collaboration & productivity. JSMCC (Chian Mobile Jiangsu) Employee Enterprise Portal and Collaboration Platform. It is one of the China Mobile’s most important IT innovation projects. The new platform is designed to serve for JSMCC’s 25000+ employees and to help them improve the working efficiency, changing their traditional working mode to social ways, encouraging employees on business collaboration and innovation. The solution is built on top of Oracle WebCenter Portal Framework and WebCenter Spaces while also leveraging Weblogic Server, UCM, OID, OAM, SES, IRM and Oracle Database 11g. By providing rich collaboration services, knowledge management services, sensitive document protection services, unified user identity management services, unified information search services and personalized information integration capabilities, the working efficiency of JSMCC employees has been greatly improved. Main Functionality : Information portal, office automation integration, personal space, group space, team collaboration with web2.0 services, unified search engine for multiple data sources, document management and protection. SSO for multiple platforms. -------- LADWP – Los Angeles Department for Water and Power Los Angeles Department of Water and Power (LADWP) is the largest public utility company in United States with over 1.6 Million customers. LADWP provides water and power for millions of residential & commercial customers in Southern California. LADWP also bills most of these customers for sanitation services provided by another city department. Country/Region: US – Los Angeles, CA Industry: Public Utility FMW Products: WebCenter Portal, WebCenter Content, JDeveloper, SOA Suite, IdM The new infrastructure consists of: Oracle WebCenter Portal including mobile portal Oracle WebCenter Content for Content Management and Digital Asset Management (DAM) Oracle OAM (IDM, OVD, OAM) integrated with AD for enterprise identity management Oracle Siebel for CRM Oracle DB Oracle SOA Suite for integration of various subsystems and back end systems  The new portal's features include: Complete Graphical redesign based on best practices in UI Design for high usability Customer Self Service implemented through MyAccount (Bill Pay, Payment History, Bill History, Usage Analysis, Service Request Management) Financial Assistance Programs (CRM, WebCenter) Customer Rebate Programs (CRM, WebCenter) Turn On/Off/Transfer of services (Commercial & Residential) Outage Reporting eNotification (SMS, email) Multilingual (English & Spanish) – using WebCenter multi-language support Section 508 (ADA) Compliant Search – Using WebCenter SES (Secured Enterprise Search) Distributed Authorship in WebCenter Content Mobile Access (any Mobile Browser)

  Read the article

• HPCM 11.1.2.2.x - HPCM Standard Costing Generating >99 Calc Scipts

  - by Jane Story

  HPCM Standard Profitability calculation scripts are named based on a documented naming convention. From 11.1.2.2.x, the script name = a script suffix (1 letter) + POV identifier (3 digits) + Stage Order Number (1 digit) + “_” + index (2 digits) (please see documentation for more information (http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_admin/apes01.html). This naming convention results in the name being 8 characters in length i.e. the maximum number of characters permitted calculation script names in non-unicode Essbase BSO databases. The index in the name will indicate the number of scripts per stage. In the vast majority of cases, the number of scripts generated per stage will be significantly less than 100 and therefore, there will be no issue. However, in some cases, the number of scripts generated can exceed 99. It is unusual for an application to generate more than 99 calculation scripts for one stage. This may indicate that explicit assignments are being extensively used. An assessment should be made of the design to see if assignment rules can be used instead. Assignment rules will reduce the need for so many calculation script lines which will reduce the requirement for such a large number of calculation scripts. In cases where the scripts generates exceeds 100, the length of the name of the 100th calculation script is different from the 99th as the calculation script name changes from being 8 characters long and becomes 9 characters long (e.g. A6811_100 rather than A6811_99). A name of 9 characters is not permitted in non Unicode applications. It is “too long”. When this occurs, an error will show in the hpcm.log as “Error processing calculation scripts” and “Unexpected error in business logic “. Further down the log, it is possible to see that this is “Caused by: Error copying object “ and “Caused by: com.essbase.api.base.EssException: Cannot put olap file object ... object name_[<calc script name> e.g. A6811_100] too long for non-unicode mode application”. The error file will give the name of the calculation script which is causing the issue. In my example, this is A6811_100 and you can see this is 9 characters in length. It is not possible to increase the number of characters allowed in a calculation script name. However, it is possible to increase the size of each calculation script. The default for an HPCM application, set in the preferences, is set to 4mb. If the size of each calculation script is larger, the number of scripts generated will reduce and, therefore, less than 100 scripts will be generated which means that the name of the calculation script will remain 8 characters long. To increase the size of the generated calculation scripts for an application, in the HPM_APPLICATION_PREFERENCE table for the application, find the row where HPM_PREFERENCE_NAME_ID=20. The default value in this row is 4194304. This can be increased e.g. 7340032 will increase this to 7mb. Please restart the profitability service after making the change.

  Read the article

• Taking a screenshot from within a Silverlight #WP7 application

  - by Laurent Bugnion

  Often times, you want to take a screenshot of an application’s page. There can be multiple reasons. For instance, you can use this to provide an easy feedback method to beta testers. I find this super invaluable when working on integration of design in an app, and the user can take quick screenshots, attach them to an email and send them to me directly from the Windows Phone device. However, the same mechanism can also be used to provide screenshots are a feature of the app, for example if the user wants to save the current status of his application, etc. Caveats Note the following: The code requires an XNA library to save the picture to the media library. To have this, follow the steps: In your application (or class library), add a reference to Microsoft.Xna.Framework. In your code, add a “using” statement to Microsoft.Xna.Framework.Media. In the Properties folder, open WMAppManifest.xml and add the following capability: ID_CAP_MEDIALIB. The method call will fail with an exception if the device is connected to the Zune application on the PC. To avoid this, either disconnect the device when testing, or end the Zune application on the PC. While the method call will not fail on the emulator, there is no way to access the media library, so it is pretty much useless on this platform. This method only prints Silverlight elements to the output image. Other elements (such as a WebBrowser control’s content for instance) will output a black rectangle. The code public static void SaveToMediaLibrary( FrameworkElement element, string title) { try { var bmp = new WriteableBitmap(element, null); var ms = new MemoryStream(); bmp.SaveJpeg( ms, (int)element.ActualWidth, (int)element.ActualHeight, 0, 100); ms.Seek(0, SeekOrigin.Begin); var lib = new MediaLibrary(); var filePath = string.Format(title + ".jpg"); lib.SavePicture(filePath, ms); MessageBox.Show( "Saved in your media library!", "Done", MessageBoxButton.OK); } catch { MessageBox.Show( "There was an error. Please disconnect your phone from the computer before saving.", "Cannot save", MessageBoxButton.OK); } } This method can save any FrameworkElement. Typically I use it to save a whole page, but you can pass any other element to it. On line 7, we create a new WriteableBitmap. This excellent class can render a visual tree into a bitmap. Note that for even more features, you can use the great WriteableBitmapEx class library (which is open source). On lines 9 to 16, we save the WriteableBitmap to a MemoryStream. The only format supported by default is JPEG, however it is possible to convert to other formats with the ImageTools library (also open source). Lines 18 to 20 save the picture to the Windows Phone device’s media library. Using the image To retrieve the image, simply launch the Pictures library on the phone. The image will be in Saved Pictures. From here, you can share the image (by email, for instance), or synchronize it with the PC using the Zune software. Saving to other platforms It is of course possible to save to other platforms than the media library. For example, you can send the image to a web service, or save it to the isolated storage on the device. To do this, instead of using a MemoryStream, you can use any other stream (such as a web request stream, or a file stream) and save to that instead. Hopefully this code will be helpful to you! Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• How to prepare for a programming competition? Graphs, Stacks, Trees, oh my! [closed]

  - by Simucal

  Last semester I attended ACM's (Association for Computing Machinery) bi-annual programming competition at a local University. My University sent 2 teams of 3 people and we competed amongst other schools in the mid-west. We got our butts kicked. You are given a packet with about 11 problems (1 problem per page) and you have 4 hours to solve as many as you can. They'll run your program you submit against a set of data and your output must match theirs exactly. In fact, the judging is automated for the most part. In any case.. I went there fairly confident in my programming skills and I left there feeling drained and weak. It was a terribly humbling experience. In 4 hours my team of 3 people completed only one of the problems. The top team completed 4 of them and took 1st place. The problems they asked were like no problems I have ever had to answer before. I later learned that in order to solve them some of them effectively you have to use graphs/graph algorithms, trees, stacks. Some of them were simply "greedy" algo's. My question is, how can I better prepare for this semesters programming competition so I don't leave there feeling like a complete moron? What tips do you have for me to be able to answer these problems that involve graphs, trees, various "well known" algorithms? How can I easily identify the algorithm we should implement for a given problem? I have yet to take Algorithm Design in school so I just feel a little out of my element. Here are some examples of the questions asked at the competitions: ACM Problem Sets Update: Just wanted to update this since the latest competition is over. My team placed 1st for our small region (about 6-7 universities with between 1-5 teams each school) and ~15th for the midwest! So, it is a marked improvement over last years performance for sure. We also had no graduate students on our team and after reviewing the rules we found out that many teams had several! So, that would be a pretty big advantage in my own opinion. Problems this semester ranged from about 1-2 "easy" problems (ie bit manipulation, string manipulation) to hard (graph problems involving fairly complex math and network flow problems). We were able to solve 4 problems in our 5 hours. Just wanted to thank everyone for the resources they provided here, we used them for our weekly team practices and it definitely helped! Some quick tips that I have that aren't suggested below: When you are seated at your computer before the competition starts, quickly type out various data structures that you might need that you won't have access to in your languages libraries. I typed out a Graph data-structure complete with floyd-warshall and dijkstra's algorithm before the competition began. We ended up using it in our 2nd problem that we solved and this is the main reason why we solved this problem before anyone else in the midwest. We had it ready to go from the beginning. Similarly, type out the code to read in a file since this will be required for every problem. Save this answer "template" someplace so you can quickly copy/paste it to your IDE at the beginning of each problem. There are no rules on programming anything before the competition starts so get any boilerplate code out the way. We found it useful to have one person who is on permanent whiteboard duty. This is usually the person who is best at math and at working out solutions to get a head start on future problems you will be doing. One person is on permanent programming duty. Your fastest/most skilled "programmer" (most familiar with the language). This will save debugging time also. The last person has several roles between assessing the packet of problems for the next "easiest" problem, helping the person on the whiteboard work out solutions and helping the person programming work out bugs/issues. This person needs to be flexible and be able to switch between roles easily.

  Read the article

• Customisation / overriding of the Envelop ecs files

  - by Dheeraj Kumar M

  There are few usecases where the requirement is to customise the envelop information (Interchange/Group ecs file). Such scenarios might be required to be used for only few of the customers. Hence, in addition to the default seeded envelop definitions, it also required to upload the customised definitions. Here is the steps for achieving the same. 1. Create only the Interchange ecs and save 2. Create only the group ecs and save 3. Use the same in B2B 1. Create only the Interchange ecs and save :       Open the document editor and select the required version and doctype. During creating new ecs, ensure to select the checkbox for insert envelop.       Once created, delete the group and transactionset nodes and retain only the Interchange ecs nodes, including both header and trailer. Save this file. 2. Create only the group ecs and save       After creating the ecs file as mentioned in steps of Interchange creation, delete the Interchange and transactionset nodes and retain only the group ecs nodes, including both header and trailer. Save this file. 3. Use the same in B2B       These newly created ecs can be used in B2B by 2 ways.              a. By overriding at the trading partner Level:              This will be very useful when the configuration is complete and then need to incorporate the customisation. In this case, just select the Trading partner - document - select the document which need to be customised.              Upload the newly created Interchange and group ECS files under the Interchange and group tabs respectively and re-deply the associated agreement.              The advantage of this approach is              - Flexibility to add customised envelop definitions to the partners              - Save the re-work of design time effort.              b. By adding another document definition in Administration - document screen:              This scenario can be used if there is no configuration done at the trading partner level. Create the required document revision and overtide the Interchange and group ECS files under the Interchange and group tabs respectively. Add the document in Trading partner - document. Create and deploy the agreements

  Read the article

• Standards Corner: Preventing Pervasive Monitoring

  - by independentid

   Phil Hunt is an active member of multiple industry standards groups and committees and has spearheaded discussions, creation and ratifications of industry standards including the Kantara Identity Governance Framework, among others. Being an active voice in the industry standards development world, we have invited him to share his discussions, thoughts, news & updates, and discuss use cases, implementation success stories (and even failures) around industry standards on this monthly column. Author: Phil Hunt On Wednesday night, I watched NBC’s interview of Edward Snowden. The past year has been tumultuous one in the IT security industry. There has been some amazing revelations about the activities of governments around the world; and, we have had several instances of major security bugs in key security libraries: Apple's ‘gotofail’ bug  the OpenSSL Heartbleed bug, not to mention Java’s zero day bug, and others. Snowden’s information showed the IT industry has been underestimating the need for security, and highlighted a general trend of lax use of TLS and poorly implemented security on the Internet. This did not go unnoticed in the standards community and in particular the IETF. Last November, the IETF (Internet Engineering Task Force) met in Vancouver Canada, where the issue of “Internet Hardening” was discussed in a plenary session. Presentations were given by Bruce Schneier, Brian Carpenter,  and Stephen Farrell describing the problem, the work done so far, and potential IETF activities to address the problem pervasive monitoring. At the end of the presentation, the IETF called for consensus on the issue. If you know engineers, you know that it takes a while for a large group to arrive at a consensus and this group numbered approximately 3000. When asked if the IETF should respond to pervasive surveillance attacks? There was an overwhelming response for ‘Yes'. When it came to 'No', the room echoed in silence. This was just the first of several consensus questions that were each overwhelmingly in favour of response. This is the equivalent of a unanimous opinion for the IETF. Since the meeting, the IETF has followed through with the recent publication of a new “best practices” document on Pervasive Monitoring (RFC 7258). This document is extremely sensitive in its approach and separates the politics of monitoring from the technical ones. Pervasive Monitoring (PM) is widespread (and often covert) surveillance through intrusive gathering of protocol artefacts, including application content, or protocol metadata such as headers. Active or passive wiretaps and traffic analysis, (e.g., correlation, timing or measuring packet sizes), or subverting the cryptographic keys used to secure protocols can also be used as part of pervasive monitoring. PM is distinguished by being indiscriminate and very large scale, rather than by introducing new types of technical compromise. The IETF community's technical assessment is that PM is an attack on the privacy of Internet users and organisations. The IETF community has expressed strong agreement that PM is an attack that needs to be mitigated where possible, via the design of protocols that make PM significantly more expensive or infeasible. Pervasive monitoring was discussed at the technical plenary of the November 2013 IETF meeting [IETF88Plenary] and then through extensive exchanges on IETF mailing lists. This document records the IETF community's consensus and establishes the technical nature of PM. The draft goes on to further qualify what it means by “attack”, clarifying that  The term is used here to refer to behavior that subverts the intent of communicating parties without the agreement of those parties. An attack may change the content of the communication, record the content or external characteristics of the communication, or through correlation with other communication events, reveal information the parties did not intend to be revealed. It may also have other effects that similarly subvert the intent of a communicator.  The past year has shown that Internet specification authors need to put more emphasis into information security and integrity. The year also showed that specifications are not good enough. The implementations of security and protocol specifications have to be of high quality and superior testing. I’m proud to say Oracle has been a strong proponent of this, having already established its own secure coding practices. 

  Read the article

• Oracle EMEA News Digest - May 2014

  - by Steve Walker

  Systems Oracle introduced a technology preview of an OpenStack® distribution that allows Oracle Linux and Oracle VM users to work with the open source cloud software. This provides customers with additional choices and interoperability while taking advantage of the efficiency, performance, scalability, and security of Oracle Linux and Oracle VM. The distribution is delivered as part of the Oracle Linux and Oracle VM Premier Support offerings, at no additional cost. Oracle plans to work further with the OpenStack community to develop and enhance its enterprise-class capabilities to meet customer demands. Also in the Open Source arena, Oracle announced the general availability of MySQL Fabric. MySQL Fabric provides an integrated system that makes it simpler to manage groups of MySQL databases. It delivers both high availability - via failure detection and failover - and scalability through automated data sharding. Oracle Database, Middleware and Technology The company made two announcements for Oracle Tuxedo, the #1 application server for C, C++, COBOL and Java deployments in private cloud or traditional data center environments. With enhanced management and monitoring features and tighter integration with Oracle technologies, the latest release of Oracle Tuxedo 12c enables organizations to dramatically increase application throughput, while reducing total cost of ownership and time to market for new application development and deployment. Oracle also introduced the latest release of its mainframe application rehosting platform, Oracle Tuxedo ART 12c, to help organizations speed up migration projects and accelerate the adoption of the new environment by current IT staff. It enables organizations to accelerate the rehosting of IBM mainframe applications and greatly enhance management and supportability of the rehosted applications while reducing costs and risk. Applications According to new Oracle studies, B2B and B2C commerce professionals find integrated, omni-channel customer experiences increasingly valuable to their organizations, and are continuing to invest in technologies and digital content strategies to facilitate them. The studies—one for B2B and one for B2C—surveyed e-commerce professionals in business and technology departments from around the world. Although the priorities, success metrics, and technology investments differed between the two groups, customer acquisition and retention emerged as common themes across B2B and B2C. Growing market share and enhancing customer experience are cited as top investment areas for all e-commerce professionals. In product news, Oracle announced the latest release of Oracle Business Intelligence (BI) Applications (version 11.1.1.8.1, in case anyone asks). It includes prebuilt connectors between Oracle Procurement and Spend Analytics and Oracle’s JD Edwards. Additionally, a new Oracle Human Resources Analytics module for developing and maintaining a skilled workforce has been introduced. In use at more than 4,000 companies worldwide, Oracle BI Applications support leading enterprise applications, including Oracle E-Business Suite, Oracle’s PeopleSoft, Oracle's Siebel CRM, Oracle’s JD Edwards EnterpriseOne offering high-performing analytics at a lower cost. Industries For the Communications Industry, Oracle has launched a new release of the Oracle Communications Core Session Manager. This gives CSPs a new way to design, deploy and manage complex networking services and embrace next-generation technology, It provides them with an immediate entry point for  network function virtualization (NFV) efforts, allowing them to realize immediate benefits associated with network virtualization – including increased service agility and improved network resource sharing. And for the Utilities Industry, Oracle is releasing solutions with new business features and enhanced technical architecture that help position utilities for success now and into the future. Oracle has provided new releases for its customer information system,  meter data management system, customer self-service solution and mobile workforce management solution.

  Read the article

• Windows Azure Emulators On Your Desktop

  - by BuckWoody

  Many people feel they have to set up a full Azure subscription online to try out and develop on Windows Azure. But you don’t have to do that right away. In fact, you can download the Windows Azure Compute Emulator – a “cloud development environment” – right on your desktop. No, it’s not for production use, and no, you won’t have other people using your system as a cloud provider, and yes, there are some differences with Production Windows Azure, but you’ll be able code, run, test, diagnose, watch, change and configure code without having any connection to the Internet at all. The best thing about this approach is that when you are ready to deploy the code you’ve been testing, a few clicks deploys it to your subscription when you make one.   So what deep-magic does it take to run such a thing right on your laptop or even a Virtual PC? Well, it’s actually not all that difficult. You simply download and install the Windows Azure SDK (you can even get a free version of Visual Studio for it to run on – you’re welcome) from here: http://msdn.microsoft.com/en-us/windowsazure/cc974146.aspx   This SDK will also install the Windows Azure Compute Emulator and the Windows Azure Storage Emulator – and then you’re all set. Right-click the icon for Visual Studio and select “Run as Administrator”:    Now open a new “Cloud” type of project:   Add your Web and Worker Roles that you want to code:   And when you’re done with your design, press F5 to start the desktop version of Azure:   Want to learn more about what’s happening underneath? Right-click the tray icon with the Azure logo, and select the two emulators to see what they are doing:          In the configuration files, you’ll see a “Use Development Storage” setting. You can call the BLOB, Table or Queue storage and it will all run on your desktop. When you’re ready to deploy everything to Windows Azure, you simply change the configuration settings and add the storage keys and so on that you need.   Want to learn more about all this?   Overview of the Windows Azure Compute Emulator: http://msdn.microsoft.com/en-us/library/gg432968.aspx Overview of the Windows Azure Storage Emulator: http://msdn.microsoft.com/en-us/library/gg432983.aspx January 2011 Training Kit: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=413E88F8-5966-4A83-B309-53B7B77EDF78&displaylang=en      

  Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >