Search Results

Search found 13104 results on 525 pages for 'malcolm box'.

Page 496/525 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

  • windows 2003 server : can't join domain

    - by phill
    I originally tried to rejoin a computer to a network which led to a "cannot find domain" error. The username/password box don't even come up. some tests i ran: I can ping the server, however I can't ping the domain name domain1.local. nslookup can't find the domain either. It looks to the isp's dns instead of my own to resolve the local machines. So i go to the dns and run netdiag.exe and gives me this error. DNS test . . . . . . . . . . . . . : Failed [WARNING] Cannot find a primary authoritative DNS server for the name 'stmartinsrv.stmartin.local.'. [RCODE_SERVER_FAILURE] The name 'srv.domain1.local.' may not be registered in DNS. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.156.1'. Please wait for 30 minutes for DNS server replication. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.157.1'. Please wait for 30 minutes for DNS server replication. [FATAL] No DNS servers have the DNS records for this DC registered. Redir and Browser test . . . . . . : Passed List of NetBt transports currently bound to the Redir NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The redir is bound to 1 NetBt transport. List of NetBt transports currently bound to the browser NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The browser is bound to 1 NetBt transport. then running dcdiag C:\Program Files\Support Toolsdcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SRV Starting test: Connectivity The host 1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local cou ld not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local) couldn't be resolved, the server name (srv.domain1.local) resolved to the IP address (192.168.1.21) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... SRV failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SRV Skipping all tests, because server SRV is not responding to directory service requests Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : domain1 Starting test: CrossRefValidation ......................... domain1 passed test CrossRefValidation Starting test: CheckSDRefDom ......................... domain1 passed test CheckSDRefDom Running enterprise tests on : domain1.local Starting test: Intersite ......................... domain1.local passed test Intersite Starting test: FsmoCheck ......................... domain1.local passed test FsmoCheck from previous postings, I've tried adding the domain suffix to the nic ip properties to both the client machine and the dc server which didn't help. note: there is only one nic on the server any ideas? thanks in advance

    Read the article

  • ESXI guests not using available CPU resources

    - by Alan M
    I have a VMWare ESXI 5.0.0 (it's a bit old, I know) host with three guest VMs on it. For reasons unknown, the guests will not use much of the availble CPU resources. I have all three guests in a single pool, with the hosts all configured to use the same amount of resource shares, so they're basically 33% each. The three guests are basically identically configured as far as their VM resources go. So the problem is, even when the guests are performing what should be very 'busy' activitites, such as at bootup, the actual host CPU consumed is something tiny, like 33mhz, when seen via vSphere console's "Virtual Machines" tab when viewing properties for the pool. And of course, the performance of the guest VMs is terrible. The host has plenty of CPU to spare. I've tried tinkering with individual guest VM resource settings; cranking up the reservation, etc. No matter. The guests just refuse to make use of the abundant CPU available to them, and insist on using a sliver of the available resources. Any suggestions? Update after reading various comments below Per the suggestions below, I did remove the guests from the application pool; this didn't make any difference. I do understand that the guests are not going to consume resources they do not need. I have tried to do a remote perfmon on the guest which is experiencing long boot times, but I cannot connect to the guest remotely with perfmon (guest is w2k8r2 server). Host graphs for CPU, Mem, Disk are basically flatlining; very little demand. Same is true for the guest stats; while the guest itself seems to be crawling, the guest resource graphing shows very little activity across CPU, Mem, Disk. Host is a Dell PowerEdge 2900, has 2 physical CPU,20gb RAM. (it's a test/dev environment using surplus gear) Guest1 has: VM ver. 7, 2vCPU, 4gb RAM, 140gb storage which lives on a RAID-5 array on the host. Guest2 has: VM ver. 7, 2vCPU, 4gb RAM, 140gb storage which lives on a RAID-5 array on the host. Guest3 has: VM ver. 7, 1vCPU, 2gb RAM, 2tb storage which lives on a RAID-5 ISCSI NAS box Perhaps I am making a false assumption that if a guest has a demand for CPU (e.g. Windows Task Manager shows 100% CPU), the host would supply the guest with more CPU (mem, disk) on demand. Another Update After checking the stats, it would appear that the host is indeed not busy at all, neither is the guest. I believe I have a good idea on the issue, though; a messed-up VMWare Tools install. The guest has VMware Tools on it, but the host says it does not. VMWare Tools refuses to uninstall, refuses to be upgraded, refuses to be recognized. While I cannot say with authority, this would appear to be something worth investigation. I do not know the origin of the guest itself, nor the specifics on the original VMWare Tools install. Following various bits of googling, I did come up with a few suggestions that went nowhere. To that end, I was going to delete this question, but was prompted not to do so since so many folks answered. My suspicion right now is; the problem truly is the guest; the guest is not making a demand on the host, and as a natural result, the host is treating the guest accordingly. My Final Update I am 99% certain the guest VM had something fundamentally wrong with it re VMWare Tools. I created a clone of a different VM with a near-identical OS config, but a properly working install of VMWare tools. The guest runs just great, and takes up it's allotment of resources when it needs to; e.g. it eats up about 850mhz CPU during startup, then ticks down to idle once the guest OS is stable.

    Read the article

  • mod_mono 'Service Temporarily Unavailable' issue

    - by Charlie Somerville
    I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

    Read the article

  • Vagrant (Virtualbox) host-only multiple node networking issue

    - by Lorin Hochstein
    I'm trying to use a multi-VM vagrant environment as a testbed for deploying OpenStack, and I've run into a networking problem with trying to communicate from one VM, to a VM-inside-of-a-VM. I have two Vagrant nodes, a cloud controller node and a compute node. I'm using host-only networking. My Vagrantfile looks like this: Vagrant::Config.run do |config| config.vm.box = "precise64" config.vm.define :controller do |controller_config| controller_config.vm.network :hostonly, "192.168.206.130" # eth1 controller_config.vm.network :hostonly, "192.168.100.130" # eth2 controller_config.vm.host_name = "controller" end config.vm.define :compute1 do |compute1_config| compute1_config.vm.network :hostonly, "192.168.206.131" # eth1 compute1_config.vm.network :hostonly, "192.168.100.131" # eth2 compute1_config.vm.host_name = "compute1" compute1_config.vm.customize ["modifyvm", :id, "--memory", 1024] end end When I try to start up a (QEMU-based) VM, it boots successfully on compute1, and its virtual nic (vnet0) is connected via a bridge, br100: root@compute1:~# brctl show 100 bridge name bridge id STP enabled interfaces br100 8000.08002798c6ef no eth2 vnet0 When the QEMU VM makes a request to the DHCP server (dnsmasq) running on controller, I can see the request reaches the controller because of the output on the syslog on the controller: Aug 6 02:34:56 precise64 dnsmasq-dhcp[12042]: DHCPDISCOVER(br100) fa:16:3e:07:98:11 Aug 6 02:34:56 precise64 dnsmasq-dhcp[12042]: DHCPOFFER(br100) 192.168.100.2 fa:16:3e:07:98:11 However, the DHCPOFFER never makes it back to the VM running on compute1. If I watch the requests using tcpdump on the vboxnet3 interface on my host machine that runs Vagrant (Mac OS X), I can see both the requests and the replies $ sudo tcpdump -i vboxnet3 -n port 67 or port 68 tcpdump: WARNING: vboxnet3: That device doesn't support promiscuous mode (BIOCPROMISC: Operation not supported on socket) tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vboxnet3, link-type EN10MB (Ethernet), capture size 65535 bytes 22:51:20.694040 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:20.694057 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:20.696047 IP 192.168.100.1.67 > 192.168.100.2.68: BOOTP/DHCP, Reply, length 311 22:51:23.700845 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:23.700876 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:23.701591 IP 192.168.100.1.67 > 192.168.100.2.68: BOOTP/DHCP, Reply, length 311 22:51:26.705978 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:26.705995 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 22:51:26.706527 IP 192.168.100.1.67 > 192.168.100.2.68: BOOTP/DHCP, Reply, length 311 But, if I tcpdump on eth2 on compute, I only see the requests, not the replies: root@compute1:~# tcpdump -i eth2 -n port 67 or port 68 tcpdump: WARNING: eth2: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes 02:51:20.240672 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 02:51:23.249758 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 02:51:26.258281 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:07:98:11, length 280 At this point, I'm stuck. I'm not sure why the DHCP replies aren't making it to the compute node. Perhaps it has something to do with the configuration of the VirtualBox virtual switch/router? Note that eth2 interfaces on both nodes have been set to promiscuous mode.

    Read the article

  • Debian Lenny to Debian Squeeze upgrade problems

    - by Roland Soós
    Hi! Yesterday I made a dist-upgrade on my Debian Lenny server. I thought it will be easy as an usual upgrade, but it's not. I got a lot of problem after the update: # apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: linux-image-2.6-amd64 : Depends: linux-image-2.6.32-5-amd64 but it is not installed E: Unmet dependencies. Try using -f. Then I tried the suggestion: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libio-compress-base-perl libatk1.0-0 libts-0.0-0 libmime-types-perl libc-client2007b libgtk2.0-common libxfixes3 libgsf-1-common hicolor-icon-theme libfile-remove-perl libxcomposite1 libltdl3-dev libneon27 libmd5-perl libwmf0.2-7 libilmbase6 libatk1.0-data djvulibre-desktop libdirectfb-1.0-0 fam libxinerama1 libcroco3 libopenexr6 libgsf-1-114 libmail-box-perl libdjvulibre21 openssl-blacklist librsvg2-2 libio-compress-zlib-perl libsysfs2 libbeecrypt6 libxdamage1 libobject-realize-later-perl libuser-identity-perl libgtk2.0-bin libxi6 libxcursor1 portmap libxrandr2 libgtk2.0-0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-image-2.6.32-5-amd64 Suggested packages: linux-doc-2.6.32 The following NEW packages will be installed: linux-image-2.6.32-5-amd64 0 upgraded, 1 newly installed, 0 to remove and 121 not upgraded. 98 not fully installed or removed. Need to get 0 B/28.6 MB of archives. After this operation, 103 MB of additional disk space will be used. Do you want to continue [Y/n]? y perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "hu_HU.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r Preconfiguring packages ... (Reading database ... 37915 files and directories currently installed.) Unpacking linux-image-2.6.32-5-amd64 (from .../linux-image-2.6.32-5-amd64_2.6.32-30_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r dpkg: error processing /var/cache/apt/archives/linux-image-2.6.32-5-amd64_2.6.32-30_amd64.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./lib/modules/2.6.32-5-amd64/kernel/sound/pci/hda/snd-hda-codec-realtek.ko': No space left on device configured to not write apport reports dpkg-deb: subprocess paste killed by signal (Broken pipe) locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r Running postrm hook script /sbin/update-grub. Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-2.6.26-2-amd64 Updating /boot/grub/menu.lst ... done Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.32-5-amd64 /boot/vmlinuz-2.6.32-5-amd64 Errors were encountered while processing: /var/cache/apt/archives/linux-image-2.6.32-5-amd64_2.6.32-30_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) # dpkg-reconfigure locales perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "hu_HU.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: Nincs ilyen f?jl vagy k?nyvt?r /usr/sbin/dpkg-reconfigure: locales is broken or not fully installed Then I stucked. Do you have any idea how could I solve this?

    Read the article

  • Linux bcm43224 wifi adapter slows down a couple minutes after boot

    - by Blubber
    I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

    Read the article

  • Connecting tomcat6 to apache2

    - by StudentKen
    Disclaimier: Not a server admin I've been scratching my head over this for weeks now (not consistently mind you, as that would be maddening). I've been trying to connect my apache2 server to my tomcat server to the point where if someone encounters *.jsp or any servelet in navigating my web directory, it's handed over to tomcat. I have both Apache2.0 (port 9099) and Tomcat6 (9089) running on Debian lenny on the same box. Currently, mod_jk is enabled with mod_jk.conf in $apacheHOME/mods-enabled/ with content: # Where to find workers.properties JkWorkersFile /etc/apache2/workers.properties # Where to put jk shared memory JkShmFile /var/log/at_jk/mod_jk.shm # Where to put jk logs JkLogFile /var/log/at_jk/mod_jk.log # Set the jk log level [debug/error/info] JkLogLevel info # Select the timestamp log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " # Send servlet for context /examples to worker named worker1 JkMount /*/servlet/* worker1 # Send JSPs for context /examples to worker named worker1 JkMount /*.jsp worker1 my workers.properties located in $apacheHOME/ with content: workers.tomcat_home=/var/lib/tomcat6 workers.java_home=/usr/lib/jdk1.6.0_23/db/ worker.list=worker1 ps=/ worker.worker1.port=9071 worker.worker1.host=localhost worker.worker1.type=ajp13 my web.xml in $tomcatHOME/conf has the following servlets enabled <servlet> <servlet-name>default</servlet-name> <servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-cla$ <init-param> <param-name>debug</param-name> <param-value>0</param-value> </init-param> <init-param> <param-name>listings</param-name> <param-value>false</param-value> </init-param> <load-on-startup>1</load-on-startup> </servlet> <servlet> <servlet-name>jsp</servlet-name> <servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class> <init-param> <param-name>fork</param-name> <param-value>false</param-value> </init-param> <init-param> <param-name>xpoweredBy</param-name> <param-value>false</param-value> </init-param> <load-on-startup>3</load-on-startup> </servlet> <servlet-mapping> <servlet-name>jsp</servlet-name> <url-pattern>*.jsp</url-pattern> </servlet-mapping> <session-config> <session-timeout>30</session-timeout> </session-config> From what I can tell, there's no funny buisness as both the apache2, tomcat, and mod_jk logs show green; yet whenever I navigate to a jsp, it simply displays the javascript. I'm unsure what the problem is exactly despite pouring over the logs and documentation for aid. I'm quite a greenhorn in the servelet world.

    Read the article

  • How to recover data files from xampp-windows to xampp-linux after crash?

    - by David Buehler
    My Windows box died after I developed a database in xampp on it; fortunately I have a backup of the entire F:/TestWeb/Xampp partition. Unfortunately, I did not do an Export (nor dump) of the "Lws2" database before the crash. I have replaced the defunct machine with one running Mint7 (based on Ubuntu 9.04 "Jaunty Jackalope") and installed xampp-linux into the /opt partition, so the new xampp now runs fine in /opt/lampp, and says all the elements are secured by passwords (which I just assigned during this installation.) I assumed that Xamp-Windows installed in November would migrate easily to xampp-linux installed iin February -- a bad assumption. It apparently would have been simple if I had known enough to do an Export or a Dump before the crash, but.... The backup was done to a Network Attached Storage drive, which is formatted as "vfat" so the backup does not carry with it any valid ownership permissions from MySql on NTFS. I now see from my backup that the old data resided in \TestWeb\Xampp\Mysql\Data\Lws2\ and consists of 7 ".frm" files which define my tables. The actual data -- I suppose a ".sql" file or files -- has disappeared, and I am resigning myself to two days of retyping it. But I do not wish to do the table layouts all over again. So I copied Data tree to /opt/lampp/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/Lws2 -- PhpMyAdmin does not see it. So I copied Data tree to /opt/lampp/var/mysql/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/var/mysql/Lws2 -- PhpMyAdmin does not see it. So I adjusted all the permissions to stop saying owner "nobody" to owner "root" and gave full permissions to all groups and to all others, with permissions percolating down, in all 4 trees. You guessed it -- PhpMyAdmin does not see any database named Lws2, only its 4 default ones. I double-checked the permissions and rebooted Linux and repeated the tests. At some point in that process I did see PhpMyAdmin showing "lws2(7)" but when I clicked on it I saw a "no table found" message. I have not been able to recreate that experience. Apparently there are some setup files for MySql and for PhpMyAdmin which need to be set up by running a wizard or two or by editing the files directly. I grepped the TestWeb tree and found an old "ldir = "C:TestWeb\Xampp\MySql\" and a "DataDir = C:TestWeb\Xampp\MySql\" in a .php file and in a .bat file, but I cannot find the corresponding config file names on the /opt partition/ -- so it looks as if these wizards have not been run to create them. What config files files does Linux use to setup MySql config files for PhpMyAdmin? What wizards do I need to run to point the MySql engine and the PhpMyAdmin at the folder /opt/lampp/data/ with its lws2 folder inside it? Or which files do I need to edit, with a sample of what it normally says under Linux? Incidentally, I remember I converted from MyISAM with its .MYD and .MYI files to InnoDB after entering only a small amount of the data -- and I do not know what file types to look for -- perhaps my data is still there but under another guise or in another place? Is it something as simple as linux needing to see "/data/" instead of /Data? I will check that out while waiting for a response. If anyone can point me to documentation that discusses this level of detail -- I will read it avidly! In any case, thanks for any clarification you can give on this thorny problem. wizdum

    Read the article

  • How to troubleshoot problem with OpenVpn Appliance Server not able to connect

    - by Peter
    1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenSvn Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

    Read the article

  • How to save POST&GET headers of a web page with "Wireshark"?

    - by brilliant
    Hello everybody, I've been trying to find a python code that would log in to my mail box on yahoo.com from "Google App Engine". I was given this code: import urllib, urllib2, cookielib url = "https://login.yahoo.com/config/login?" form_data = {'login' : 'my-login-here', 'passwd' : 'my-password-here'} jar = cookielib.CookieJar() opener = urllib2.build_opener(urllib2.HTTPCookieProcessor(jar)) form_data = urllib.urlencode(form_data) # data returned from this pages contains redirection resp = opener.open(url, form_data) # yahoo redirects to http://my.yahoo.com, so lets go there instead resp = opener.open('http://mail.yahoo.com') print resp.read() The author of this script looked into HTML script of yahoo log-in form and came up with this script. That log-in form contains two fields, one for users' Yahoo! ID and another one is for users' password. However, when I tried this code out (substituting mu real Yahoo login for 'my-login-here' and my real password for 'my-password-here'), it just return the log-in form back to me, which means that something didn't work right. Another supporter suggested that I should send an MD5 hash of my password, rather than a plain password. He also noted that in that log-in form there are a lot other hidden fields besides login and password fields (he called them "CSRF protections") that I would also have to deal with: <input type="hidden" name=".tries" value="1"> <input type="hidden" name=".src" value="ym"> <input type="hidden" name=".md5" value=""> <input type="hidden" name=".hash" value=""> <input type="hidden" name=".js" value=""> <input type="hidden" name=".last" value=""> <input type="hidden" name="promo" value=""> <input type="hidden" name=".intl" value="us"> <input type="hidden" name=".bypass" value=""> <input type="hidden" name=".partner" value=""> <input type="hidden" name=".u" value="bd5tdpd5rf2pg"> <input type="hidden" name=".v" value="0"> <input type="hidden" name=".challenge" value="5qUiIPGVFzRZ2BHhvtdGXoehfiOj"> <input type="hidden" name=".yplus" value=""> <input type="hidden" name=".emailCode" value=""> <input type="hidden" name="pkg" value=""> <input type="hidden" name="stepid" value=""> <input type="hidden" name=".ev" value=""> <input type="hidden" name="hasMsgr" value="0"> <input type="hidden" name=".chkP" value="Y"> <input type="hidden" name=".done" value="http://mail.yahoo.com"> He said that I should do the following: Simulate normal login and save login page that I get; Save POST&GET headers with "Wireshark"; Compare login page with those headers and see what fields I need to include with my request; I really don't know how to carry out the first two of these three steps. I have just downloaded "Wireshark" and have tried capturing some packets there. However, I don't know how to "simulate normal login and save the login page". Also, I don't how to save POST$GET headers with "Wireshark". Can anyone, please, guide me through these two steps in "Wireshark"? Or at least tell me what I should start with. Thank You.

    Read the article

  • Cannot connect to MySQL Server on RHEL 5.7

    - by Jeffrey Wong
    I have a standard MySQL Server running on Red hat 5.7. I have edited /etc/my.cnf to specify the bind address as my server's public IP address. [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 # Disabling symbolic-links is recommended to prevent assorted security risks ; # to do so, uncomment this line: # symbolic-links=0 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid bind-address=171.67.88.25 port=3306 And I have also restarted my firewall sudo /sbin/iptables -A INPUT -i eth0 -p tcp --destination-port 3306 -j ACCEPT /sbin/service iptables save The network administrator has already opened port 3306 for this box. When connecting from a remote computer (running Ubuntu 10.10, server is running RHEL 5.7), I issue mysql -u jeffrey -p --host=171.67.88.25 --port=3306 --socket=/var/lib/mysql/mysql.sock but receive a ERROR 2003 (HY000): Can't connect to MySQL server on '171.67.88.25' (113). I've noticed that the socket file /var/lib/mysql/mysql.sock is blank. Should this be the case? UPDATE The result of netstat -an | grep 3306 tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN Result of sudo netstat -tulpen Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN 0 7602 3168/hpiod tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 27 7827 3298/mysqld tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 5110 2802/portmap tcp 0 0 0.0.0.0:8787 0.0.0.0:* LISTEN 0 8431 3326/rserver tcp 0 0 0.0.0.0:915 0.0.0.0:* LISTEN 0 5312 2853/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7655 3188/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7688 3199/cupsd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 8025 3362/sendmail: acce tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN 0 7620 3173/python udp 0 0 0.0.0.0:909 0.0.0.0:* 0 5300 2853/rpc.statd udp 0 0 0.0.0.0:912 0.0.0.0:* 0 5309 2853/rpc.statd udp 0 0 0.0.0.0:68 0.0.0.0:* 0 4800 2598/dhclient udp 0 0 0.0.0.0:36177 0.0.0.0:* 70 8314 3476/avahi-daemon: udp 0 0 0.0.0.0:5353 0.0.0.0:* 70 8313 3476/avahi-daemon: udp 0 0 0.0.0.0:111 0.0.0.0:* 0 5109 2802/portmap udp 0 0 0.0.0.0:631 0.0.0.0:* 0 7691 3199/cupsd Result of sudo /sbin/iptables -L -v -n Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 6373 2110K RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 1241 packets, 932K bytes) pkts bytes target prot opt in out source destination Chain RH-Firewall-1-INPUT (2 references) pkts bytes target prot opt in out source destination 572 861K ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 1 28 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 255 0 0 ACCEPT esp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT ah -- * * 0.0.0.0/0 0.0.0.0/0 46 6457 ACCEPT udp -- * * 0.0.0.0/0 224.0.0.251 udp dpt:5353 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:631 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:631 782 157K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 120 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:23 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 4970 1086K REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Result of nmap -P0 -p3306 171.67.88.25 Host is up (0.027s latency). PORT STATE SERVICE 3306/tcp filtered mysql Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds Solution When everything else fails, go GUI! system-config-securitylevel and add port 3306. All done!

    Read the article

  • Windows Server 2012 Migration (DNS/AD DS Standard Eval to Essentials OEM) P2V -> Do I need a Secondary Domain Controller during migration?

    - by Aubrey Robertson
    This is my first post on this exchange (although not my first on stack exchange), so please have patience. I am a 3rd year student intern, and I have been tasked with virtualizing the server systems at the company I work for. I have come a long way, and I am almost ready to install the VM Server in migration mode. Here is some information: Source Server: Windows Server 2012 Standard Evaluation DNS Server (local only) Advanced Directory Domain Services File and Storage stuff A few other server roles Destination Server: Windows Server 2012 Essentials OEM (Hyper-V client) Running under a temporary Hyper-V host (will migrate the Hyper-V host back to the old machine after the original server is virtualized as a client). Sitting currently at the "Select Installation Mode" screen. I have been following the guides on Microsoft tech net, and today I spent most of the day getting rid of issues in the Best Practices Analyser on the source machine. I have 3 remaining issues (which are all related): ERROR: DNS: DNS servers on Ethernet (adapter name) should include the loopback address, but not as the first entry (flavour text indicates that, during migration, the DNS server may not be found) WARNING: All domains should have at least two domain controllers for redundancy. WARNING: DNS: Ethernet should be configured to use both a preferred and an alternate DNS Server. All of these issues can be resolved by deploying a secondary domain controller, but I have never done that before (see my concerns below). The main issue here that I am concerned with for installing in migration mode is the FIRST one (the error). If I try and set-up the new server deployment, and the adapter domain controller is listed as localhost, then this may cause the installation to fail. (at least, this is what the Microsoft documentation suggests). But I do not have another IP address to enter here as I have no other local domain controllers. So I did the first obvious thing that came to my mind, and tried to use Google DNS servers as my alternates. That did not work because they couldn't recognize other computers in the "forest". Now I'm no expert when it comes to DNS, so please forgive my ignorance. This DNS server is concerned only with Active Directory stuffs for the local network. If I go ahead with migration, and it fails, then I will just have to go ahead and install a secondary DNS server I suppose. The problem I have here is that I am limited by the amount of Windows Server keys I have available (I have 2); however, I do have access to a Linux box running Debian Wheezy that I set-up two weeks ago as a Mantis server. I could install Windows Server 2012 as a secondary DNS (I think) in a VM and use that, but then it seems like I will be wasting time, and probably the Windows key too, and if there's another way to do it with Linux that would be much better. Even better still, do I even need a secondary DNS server for migration at all? The hints said that during migration the original machine "might" not be found. Thank you for your time and consideration.

    Read the article

  • Local DNS server (bind) and the router DHCP

    - by Luca
    I just set up an internal http server for internal use (I set up Redmine), in a small network (30 or so PCs). I set up the http server on a virtual box ubuntu, that runs also the DNS server (bind). In the DNS lookup I added the Redmine server name (redmine.engserver <- 192.168.1.14) and as forwarders the outside ISP DNS IP adresses. I am using a small wi-fi router (ASUS RT-N66U) as DHCP (and as gateway). In the DHCP config page I set up as DNS the ubuntu server IP (it is fixed 192.168.1.14). Now when I connect a new PC to the network, the DHCP router issues its new IP and as DNS servers it issues: primary: 192.168.1.14 (ubuntu machine) and seconary 192.168.1.1 (the router itself). ipconfig /all Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 248539109 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-15-AA-3F-D0-67-E5-49-A7-EF DNS Servers . . . . . . . . . . . : 192.168.1.14 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Before changing the DHCP setting on the router, I would always get only one DNS server: 192.168.1.1 (which uses probably DNS forwarding to external public DNS services). The problem is this: If in my browser I type www.google.com, it works all the time. If in the browser I type http://redmine.engserver/ it works most of the time, but sometimes it ends up with a yahoo page search or something else. In the DNS cache it shows as (Server not found). ipconfig /displaydns I looked with wireshark and it seems like sometimes the client PC interrogates the secondary DNS (192.168.1.1) instead of the first 192.168.1.14. Obviously this one is a public domain and it does not have the redmine.engserver entry. What is wrong in this configuration? Is it even legitimate to have 2 DNS (one internal and one forwarded by the router) which are inconsistent? Is there another way to have a local name service in a small office network? Why is the router DHCP issuing itself as DNS?

    Read the article

  • Reuse remote ssh connections and reduce command/session logging verbosity?

    - by ewwhite
    I have a number of systems that rely on application-level mirroring to a secondary server. The secondary server pulls data by means of a series of remote SSH commands executed on the primary. The application is a bit of a black box, and I may not be able to make modifications to the scripts that are used. My issue is that the logging in /var/log/secure is absolutely flooded with requests from the service user, admin. These commands occur many times per second and have a corresponding impact on logs. They rely on passphrase-less key exchange. The OS involved is EL5 and EL6. Example below. Is there any way to reduce the amount of logging from these actions. (By user? By source?) Is there a cleaner way for the developers to perform these ssh executions without spawning so many sessions? Seems inefficient. Can I reuse the existing connections? Example log output: Jul 24 19:08:54 Cantaloupe sshd[46367]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46446]: Accepted publickey for admin from 172.30.27.32 port 33526 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46475]: Accepted publickey for admin from 172.30.27.32 port 33527 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46504]: Accepted publickey for admin from 172.30.27.32 port 33528 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46583]: Accepted publickey for admin from 172.30.27.32 port 33529 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46612]: Accepted publickey for admin from 172.30.27.32 port 33530 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46641]: Accepted publickey for admin from 172.30.27.32 port 33531 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46720]: Accepted publickey for admin from 172.30.27.32 port 33532 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46749]: Accepted publickey for admin from 172.30.27.32 port 33533 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46778]: Accepted publickey for admin from 172.30.27.32 port 33534 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46857]: Accepted publickey for admin from 172.30.27.32 port 33535 ssh2

    Read the article

  • Samba with remote LDAP authentication doesn`t see users properly

    - by LucasBr
    I'm trying to setup a samba server authenticated by a remote LDAP server, and I'm having some problems that I can't figure how to solve. I was able to make an getent passwd at samba server and I could see all users at ldapserver, but when I tried to access \\SAMBASERVER at my windows box I had this at the /var/log/samba/log.mywindowsbox: <...snip...> [2012/10/19 13:05:22.449684, 2] smbd/sesssetup.c:1413(setup_new_vc_session) setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources. [2012/10/19 13:05:22.449692, 3] smbd/sesssetup.c:1212(reply_sesssetup_and_X_spnego) Doing spnego session setup [2012/10/19 13:05:22.449701, 3] smbd/sesssetup.c:1254(reply_sesssetup_and_X_spnego) NativeOS=[] NativeLanMan=[] PrimaryDomain=[] [2012/10/19 13:05:22.449717, 3] libsmb/ntlmssp.c:747(ntlmssp_server_auth) Got user=[lucas] domain=[BUSINESS] workstation=[MYWINDOWSBOX] len1=24 len2=24 [2012/10/19 13:05:22.449747, 3] auth/auth.c:216(check_ntlm_password) check_ntlm_password: Checking password for unmapped user [BUSINESS]\[lucas]@[MYWINDOWSBOX] with the new password interface [2012/10/19 13:05:22.449759, 3] auth/auth.c:219(check_ntlm_password) check_ntlm_password: mapped user is: [SAMBASERVER]\[lucas]@[MYWINDOWSBOX] [2012/10/19 13:05:22.449773, 3] smbd/sec_ctx.c:210(push_sec_ctx) push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1 [2012/10/19 13:05:22.449783, 3] smbd/uid.c:429(push_conn_ctx) push_conn_ctx(0) : conn_ctx_stack_ndx = 0 [2012/10/19 13:05:22.449791, 3] smbd/sec_ctx.c:310(set_sec_ctx) setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1 [2012/10/19 13:05:22.449922, 2] lib/smbldap.c:950(smbldap_open_connection) smbldap_open_connection: connection opened [2012/10/19 13:05:23.001517, 3] lib/smbldap.c:1166(smbldap_connect_system) ldap_connect_system: successful connection to the LDAP server [2012/10/19 13:05:23.007713, 3] smbd/sec_ctx.c:418(pop_sec_ctx) pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0 [2012/10/19 13:05:23.007733, 3] auth/auth_sam.c:399(check_sam_security) check_sam_security: Couldn't find user 'lucas' in passdb. [2012/10/19 13:05:23.007743, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [lucas] -> [lucas] FAILED with error NT_STATUS_NO_SUCH_USER [2012/10/19 13:05:23.007760, 3] smbd/error.c:80(error_packet_set) error packet at smbd/sesssetup.c(111) cmd=115 (SMBsesssetupX) NT_STATUS_LOGON_FAILURE [2012/10/19 13:05:23.010469, 3] smbd/process.c:1489(process_smb) Transaction 3 of length 142 (0 toread) <...snip...> /etc/samba/smb.conf file follows: [global] dos charset = 850 unix charset = LOCALE workgroup = BUSINESS netbios name = SAMBASERVER bind interfaces only = true interfaces = lo eth0 eth1 smb ports = 139 hosts deny = All hosts allow = 192.168.78. 192.168.255. 127.0.0.1 10.149.122. 192.168.0. name resolve order = wins bcast hosts log level = 3 syslog = 0 log file = /var/log/samba/log.%m max log size = 100000 domain logons = No wins support = Yes wins proxy = No client ntlmv2 auth = Yes lanman auth = Yes ntlm auth = Yes dns proxy = Yes time server = Yes security = user encrypt passwords = Yes obey pam restrictions = Yes ldap password sync = Yes unix password sync = Yes passdb backend = ldapsam:"ldap://192.168.78.206" ldap ssl = off ldap admin dn = uid=root,ou=Users,dc=business,dc=intranet ldap suffix = ldap group suffix = ou=Groups ldap user suffix = ou=Users ldap machine suffix = ou=Computers ldap idmap suffix = ou=Idmap ldap delete dn = Yes add user script = /usr/sbin/smbldap-useradd -m "%u" delete user script = /usr/sbin/smbldap-userdel "%u" add group script = /usr/sbin/smbldap-groupadd -p "%g" delete group script = /usr/sbin/smbldap-groupdel "%g" add user to group script = /usr/sbin/smbldap-groupmod -m "%u" "%g" delete user from group script = /usr/sbin/smbldap-groupmod -x "%u" "%g" set primary group script = /usr/sbin/smbldap-usermod -g "%g" "%u" add machine script = /usr/sbin/smbldap-useradd -W -t5 "%u" idmap backend = ldap:"ldap://192.168.78.206" idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 load printers = No printcap name = /dev/null map acl inherit = Yes map untrusted to domain = Yes enable privileges = Yes veto files = /lost+found/ /publicftp/ So, \\SAMBASERVER says he couldn't find my user, but I can see it by getent passwd . What I can do in order to SAMBASERVER see and authenticate my user? Thanks in advance!

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • How to troubleshoot a PHP script that causes a Segmenation Fault?

    - by johnlai2004
    I posted this on stackoverflow.com as well because I'm not sure if this is a programming problem or a server problem. I'm using ubuntu 9.10, apache2, mysql5 and php5. I've noticed an unusual problem with some of my php programs. Sometimes when visiting a page like profile.edit.php, the browser throws a dialogue box asking to download profile.edit.php page. When I download it, there's nothing in the file. profile.edit.php is supposed to be a web form that edits user information. I've noticed this on some of my other php pages as well. I look in my apache error logs, and I see a segmentation fault message: [Mon Mar 08 15:40:10 2010] [notice] child pid 480 exit signal Segmentation fault (11) And also, the issue may or may not appear depending on which server I deploy my application too. Additonal Details This doesn't happen all the time though. It only happens sometimes. For example, profile.edit.php will load properly. But as soon as I hit the save button (form action="profile.edit.php?save=true"), then the page asks me to download profile.edit.php. Could it be that sometimes my php scripts consume too much resources? Sample code Upon save action, my profile.edit.php includes a data_access_object.php file. I traced the code in data_access_object.php to this line here if($params[$this->primaryKey]) { $q = "UPDATE $this->tableName SET ".implode(', ', $fields)." WHERE ".$this->primaryKey." = ?$this->primaryKey"; $this->bind($this->primaryKey, $params[$this->primaryKey], $this->tblFields[$this->primaryKey]['mysqlitype']); } else { $q = "INSERT $this->tableName SET ".implode(', ', $fields); } // Code executes perfectly up to this point // echo 'print this'; exit; // if i uncomment this line, profile.edit.php will actually show 'print this'. If I leave it commented, the browser will ask me to download profile.edit.php if(!$this->execute($q)){ $this->errorSave = -3; return false;} // When I jumped into the function execute(), every line executed as expected, right up to the return statement. And if it helps, here's the function execute($sql) in data_access_object.php function execute($sql) { // find all list types and explode them // eg. turn ?listId into ?listId0,?listId1,?listId2 $arrListParam = array_bubble_up('arrayName', $this->arrBind); foreach($arrListParam as $listName) if($listName) { $explodeParam = array(); $arrList = $this->arrBind[$listName]['value']; foreach($arrList as $key=>$val) { $newParamName = $listName.$key; $this->bind($newParamName,$val,$this->arrBind[$listName]['type']); $explodeParam[] = '?'.$newParamName; } $sql = str_replace("?$listName", implode(',',$explodeParam), $sql); } // replace all ?varName with ? for syntax compliance $sqlParsed = preg_replace('/\?[\w\d_\.]+/', '?', $sql); $this->stmt->prepare($sqlParsed); // grab all the parameters from the sql to create bind conditions preg_match_all('/\?[\w\d_\.]+/', $sql, $matches); $matches = $matches[0]; // store bind conditions $types = ''; $params = array(); foreach($matches as $paramName) { $types .= $this->arrBind[str_replace('?', '', $paramName)]['type']; $params[] = $this->arrBind[str_replace('?', '', $paramName)]['value']; } $input = array('types'=>$types) + $params; // bind it if(!empty($types)) call_user_func_array(array($this->stmt, 'bind_param'), $input); $stat = $this->stmt->execute(); if($GLOBALS['DEBUG_SQL']) echo '<p style="font-weight:bold;">SQL error after execution:</p> ' . $this->stmt->error.'<p>&nbsp;</p>'; $this->arrBind = array(); return $stat; }

    Read the article

  • Did a recent WinXP update break CD/DVD read speeds? SP2/SP3

    - by quack quixote
    I have two systems with fresh installations of Windows XP Pro SP3 (SP3 slipstreamed into the installer; fully updated after install). One's a refurbished 2.4GHz Pentium4 system; the other is a new 1.6GHz Atom330 build. Both have brand-new dual-layer CD/DVD burners (one's a LiteOn IDE, the other an LG SATA). Both take a really looooong time to read a single-layer DVD in Windows with Cygwin tools. Specifically, 40 minutes or more. I burn backup data to single-layer DVD+/-R and use MD5 hashes for data verification (made with the standard md5sum tool in Unix or Cygwin). The hashes are burned to disc with the data files, and I use this command to verify: $ cd /path/to/disc/mountpoint ; time md5sum -c < md5.txt Here's how long that takes to run on a full single-layer DVD+/-R disc: Old system (WinXP SP2, 1.8GHz Athlon 2500+, last summer): ~10 minutes Old system (Ubuntu 9.04, 1.8GHz Athlon 2500+): ~10 minutes Old system (Debian 5, dual 550MHz P3): ~10 minutes New Pentium4 system (running Ubuntu 9.04): ~5 minutes New Pentium4 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes New Atom330 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes Now the weird stuff: Old system (WinXP SP2, 1.8GHz Athlon 2500+, today): ~25 minutes New Pentium4 system (running WinXP SP3, read from Cygwin): ~40-50 minutes (?!!) New Atom330 system (running WinXP SP3, read from Cygwin): ~40 minutes (can do it in ~30 minutes ...if i have another program spin up the drive first) Since both systems will copy files in 6 minutes using Windows Explorer, I know it's not a hardware problem. Windows just never spins up the drive during the Cygwin read, so it stays super-slow the whole time. Other programs like EAC and DVD Decrypter seem to spin up the disc just fine during their processing. DMA is enabled on both systems. (Can confirm in Windows' Device Manager on the Atom330, not on the P4.) Nero's DriveSpeed tool doesn't seem to have any effect. Copy times are comparable from commandline with Windows' xcopy. Copying with Cygwin's cp looks more like the problem state -- it will spin up the drive for a short time, never reaches full speed, and lets it spin back down again for most of the copy. What I need is to get full read speeds from Cygwin. Is this a known issue with SP3 or some other recent Windows update? Any other ideas? Update: More testing; Windows will spin up the drive when data is copied with Windows tools, but not when read in place or copied with Cygwin tools. It doesn't make sense to me that Windows spins up the drive for copying, but not for other reads. Might be more of a Cygwin problem? Update 2: GUI activity is sluggish during the problem state -- during the Cygwin verifies, there's a slight but noticable delay when dragging windows or icons around on the desktop, switching windows, Alt-Tabbing through open applications, opening new windows, etc. It reminds me of the delay when opening a Windows Explorer window on My Computer just after inserting a DVD. I've tried updating Cygwin (from 1.5.x to 1.7.x), but no change in the problem behavior. I've also noticed this issue occurs on WinXP SP2, but it's not exactly the same -- some spin-up occurs, so the read happens in ~25-30 minutes instead of 40+. The SP2 system used to run the verifies in ~10 minutes, and when it first changed (not sure exactly when, maybe in late November or early December 2009) I thought it was dying hardware. This is why I suspect an official update of breaking this functionality; this has worked for years on that SP2 box.

    Read the article

  • Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed!

    - by meder
    I restarted my VPS box ( manually/hard restart ) and ever since, mysql fails to start for whatever reason. I did a tail /var/log/syslog and I get this: Feb 20 11:49:33 kyrgyznews mysqld[11461]: ) ;InnoDB: End of page dump 575 Feb 20 11:49:33 kyrgyznews mysqld[11461]: 110220 11:49:33 InnoDB: Page checksum 1045788239, prior-to-4.0.14-form checksum 236985105 576 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: stored checksum 1178062585, prior-to-4.0.14-form stored checksum 236985105 577 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Page lsn 0 10651, low 4 bytes of lsn at page end 10651 578 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Page number (if stored to page already) 3, 579 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0 580 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Database page corruption on disk or a failed 581 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: file read of page 3. 582 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: You may have to recover from a backup. 583 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: It is also possible that your operating 584 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: system has corrupted its own file cache 585 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: and rebooting your computer removes the 586 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: error. 587 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: If the corrupt page is an index page 588 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: you can also try to fix the corruption 589 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: by dumping, dropping, and reimporting 590 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: the corrupt table. You can use CHECK 591 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: TABLE to scan your table for corruption. 592 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: See also InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html 593 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: about forcing recovery. 594 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Ending processing because of a corrupt database page. 595 Feb 20 11:49:33 kyrgyznews mysqld_safe[11469]: ended 596 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in 597 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: ^G/usr/bin/mysqladmin: connect to server at 'localhost' failed 598 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' 599 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! 600 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: 601 Feb 20 11:49:56 kyrgyznews mysqld_safe[13437]: started 602 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: The log sequence number in ibdata files does not match 603 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: the log sequence number in the ib_logfiles! 604 Feb 20 11:49:56 kyrgyznews mysqld[13440]: 110220 11:49:56 InnoDB: Database was not shut down normally! 605 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Starting crash recovery. 606 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Reading tablespace information from the .ibd files... 607 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Restoring possible half-written data pages from the doublewrite 608 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: buffer... 609 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Database page corruption on disk or a failed 610 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: file read of page 3. 611 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: You may have to recover from a backup. I have looked at the page it referenced, http://dev.mysql.com/doc/refman/5.0/en/forcing-innodb-recovery.html, but before messing with any settings I was wondering what experienced DBAs would suggest doing? Is there any harm in forcing the recovery? PS - I did not make any updates to mysql. Version is mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using readline 5.2.

    Read the article

  • Win 7 Netbook refuses to ping JetDirect card (all other PCs work)

    - by Luke Puplett
    I have an odd thing occuring here. From a Windows 7 netbook, I cannot ping an HP printer on the network, while all other machines (Win7/Vista) can. And the netbook can also ping everything else on the LAN. Example showing that the netbook can ping 192.168.3.4 but not 3.6. C:\Users\backdoor>ping w7ue1m Pinging w7ue1m.corp.biz.co.uk [192.168.3.4] with 32 bytes of data: Reply from 192.168.3.4: bytes=32 time=7ms TTL=128 Reply from 192.168.3.4: bytes=32 time=4ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Ping statistics for 192.168.3.4: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 7ms, Average = 3ms C:\Users\backdoor>ping uktnprint1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Ping statistics for 192.168.3.6: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),`enter code here` The IPCONFIG result for the netbook is fine. IPv4 Address. . . . . . . . . . . : 192.168.3.0 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Most unusual network thing I've seen in years. I must reiterate that only this netbook is having trouble pinging/printing. Thanks, Luke ** UPDATE ** Am now on a Vista box, and here's the IPCONFIG: IPv4 Address. . . . . . . . . . . : 192.168.3.3 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.6: bytes=32 time=2ms TTL=60 Firewall is off. I'll look into the chance of an IP conflict because it's the only thing I can think of - compare arp caches of each machine. Cheers!

    Read the article

  • Mac Terminal.app: Force '^C' to be printed when editing current prompt, then aborting it

    - by Stefan Lasiewski
    This is the opposite of Prevent “^C” from being printed when aborting editing current prompt. I'm using Bash. When I'm editing the commandline in Bash, and I hit Control-C to abort the commandline, the '^C' character does not display. I would like to see this character. I tried commands like stty -ctlecho and stty ctlecho (which I borrowed from the other question), but this didn't work for me. This behavior seems to be true with my environment on Ubuntu, CentOS and MacOSX. This only happens within Apple's Terminal.App. If I SSH to a remote Linux or FreeBSD box, then ^C is printed. So, this is clearly just a local setting. Update: Here is the output of stty -a, as requested by @quack quixote : $ stty -a speed 9600 baud; 41 rows; 88 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel iutf8 -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W; After typing stty sane, stty -a will output the following. The only difference is the parameter of -iutf8. $ stty sane $ stty -a speed 9600 baud; 41 rows; 157 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -iutf8 -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W;

    Read the article

  • Where should I go with hosting my site: VPS, GAE, another option?

    - by Jonathan Hayward
    My website, http://JonathansCorner.com/, began life before 1994 as www.imsa.edu/~jhayward/ and has been through various iterations and improvements to content, HTML, and the like, but remains a literature site that is from a web administrator's perspective fairly simple and primitive: a fair amount of static HTML and supporting files, a little bit of CGI and URI rewriting, .htaccess files providing Expires: headers and the like. An associated site demoes various CGI scripts that fall under the category of "and other creations"; the site as a whole has the purpose of sharing my creative works, and so far a fairly rudimentary use of Apache functionality, supported by Unix tools to, for instance, update RSS feed and the "starting point" link on the home page, has served that purpose fairly well. I looked around here on web hosting, and found the note on web host reccommendations as a good note for "What are some of people's favorite web hosts overall," but I wanted to ask a more focused question of "What are the best web hosts for criteria XYZ:" I am looking at a VPS so I will have root, be able to install stuff and edit Apache's config files etc., running Gentoo or other Linux, BSD, or the like. I would like a system that is secure enough that the host's vulnerabilities are mostly the ones that come along with what I am trying to do: that is, I won't be trying to administer and secure an ancient Linux like some have complained about at 1and1. I would like good uptime/reliability and competent support staff: if the level 1 help desk is going to tell me to go to "My Computer" on a Linux box, I'd like to be able to get past them. Ideally I would like a site hosted within some place that will have low latency for U.S. visitors in particular. I would like a hosting solution that will be with a stable business, one that will probably be around, and one unlikely to vanish without warning. With those things specified, I would be interested in knowing what are the less expensive options. (I expect that some of the things I've specified will knock out all of the cheapest options, but I'm still interested in price.) With all that stated, I'd like to back up a bit and look at whether I am asking the right question. I am concerned that the above is a very good way of asking, "How can I keep my site in line with the wave of the past?" I am wondering if it might be specifically wiser to look to adapt my site to newer technologies instead of trying to keep it on older technologies. For instance, while I would hardly portray my site as a way to show off the full power of Google App Engine, the main site at least should be a straightforward port if I were to do that. And beyond Google App Engine, my knowledge of cloud solutions is basic. If it is a better and more future-proof solution to port my site to another kind of solution, I would be interested in knowing where those future-proof solutions lie. So I would be interested in wisdom. If the question I asked in detail is still a good question to be asking, what would people suggest? Or if I should seriously consider porting my site to a newer basic option, what should I try there? Any thoughts would be appreciated.

    Read the article

  • ubuntu 10.04; kvm bridged networking not working with public ip addresses

    - by senorsmile
    I have a dedicated hosted server box with ubuntu 10.04 64 bit installed. I would like to run kvm with ubuntu 8.04 installed for some php 5.2 compatible apps(they don't work right with php 5.3, the default in ubuntu 10.04). I installed KVM as instructed at https://help.ubuntu.com/community/KVM/Installation . I installed the vm using virt-manager. I never could figure out how use virt-install or any of those automated installers. I just installed it using the disc. I set up bridged networking as per https://help.ubuntu.com/community/KVM/Networking . However, the bridged connection doesn't work. Here's my /etc/network/interfaces on the host, running ubuntu 10.04. (with specific public ip blanked) auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.xx netmask 255.255.255.248 gateway xx.xx.xx.xa bridge_ports eth0 bridge_stp on bridge_fd 0 bridge_maxwait 10 ` Here's my /etc/network/interfaces on the guest, running ubuntu 8.04. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xy netmask 255.255.255.248 gateway xx.xx.xx.xa The two vm's can communicate to each other. But, the guest vm can't access anyone in the real world. Here's my /etc/libvirt/qemu/store_804.xml <domain type='kvm'> <name>store_804</name> <uuid>27acfb75-4f90-a34c-9a0b-70a6927ae84c</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/store_804.img'/> <target dev='hda' bus='ide'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='52:54:00:26:0b:c6'/> <source bridge='br0'/> <model type='virtio'/> </interface> <console type='pty'> <target port='0'/> </console> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='es1370'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Any idea where I've gone wrong?

    Read the article

  • Alternative Methods of Sharing Folders in Windows?

    - by Blaenk
    Hey guys. I'm running Windows 7 and as of now I simply share folders as one usually does in Windows. I then have a MacBook with Leopard (Now Snow Leopard) which I use to connect to my computer to mount the shares by going to Finder, then CMD + K and typing smb://BlaenkPC (The name of my PC) into the address box. This consequently connects to my computer and mounts all of the shares. The problem is that sometimes, if for example I close my MacBook (Which makes it go to sleep) or sometimes even without doing that, the connection somehow drops. Sometimes I close the MacBook and upon re-opening it, everything still works; it's random. It still shows the computer as being connected, but it just shows 'loading' indefinitely. If I hit 'eject' with the intention of re-connecting to the computer, it disappears from the sidebar (The Computer Icon) in Finder, but I cannot re-connect. Activity Monitor (or ps aux, whichever) both show hung instances of umount; one for each share that was mounted. I cannot kill these processes with kill or killall (Yes, even with sudo, and sending signal -9). This has happened to me before, and here is another person who has experienced this. My question boils down to this: Is there an alternative method of sharing folders in Windows, that my Mac can read/understand, that is possibly more reliable and preferably just as fast? I usually use the mounted shares to watch television episodes off my computer, or movies, etc. (In other words, I open them in VLC and they automatically stream from my computer). As far as I can tell, this is a problem with the Samba protocol. I have heard of NFS, but I am not sure if I would have to re-format my drives, or what. I don't mind running a service or daemon to allow the sharing of the folders, I just want it to be done and hopefully in a better way than typical Windows shares through Samba. Usually when I encounter this problem, which is often (read: every day), I have no other option but to restart the MacBook. As I stated in the first question I linked to, shutting down and restarting don't work; I have to manually force the shutdown by holding the power button. I have not modified my installation of Mac OS X in any hackish way, so I doubt it's something with the Operating System, but worst come to worst, I might end up reformatting and doing a clean install to see if that fixes anything, as I am at a complete loss as to what may be causing the problem, and no one else seems to have any idea or care, despite there being quite a few people suffering from this problem, as my research has shown. Any pieces of information that can help are extremely appreciated. You don't have to answer every question on here, but maybe even some insight as to why it might not be possible to kill those hung umount instances for example, or why I may not be able to reconnect using samba (Is it something regarding the way the protocol works?). One thing to note is that I have another computer in the home network that doesn't seem to have this problem. However, it is also running Windows 7 (Note though that I am not using the homegroup feature, but the typical windows sharing feature). My only deduction is that the problem is being caused by the way the Mac (Or Samba implementation, whichever) is handling things. Perhaps it is a limitation.

    Read the article

  • vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

    - by kce
    I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service (TLS) link. Let's work backwards from the network edge: The Debian server has an external connection attached to eth0. The internal interface is eth1, which is connected directly from our Hyper-V host to the 5406. The port that eth1 is attached to is setup as Trk12. The 2610 is attached to Trk9 (which trunks a whole slew of VLANs - Trk9 is our TLS head). I can successfully ping the management IP addresses for my VLAN from both switches but I cannot ping, from either switch, the virtual interface for my new VLAN on the Debian-base router and firewall. The existing VLAN works fine. What gives? The port eth1 is attached to is a trunk, the existing VLAN (ID 98) is untagged on the trunk, the new VLAN (ID 198) is tagged. VLAN 198 is tagged on Trk9 on the 5406 and on the 2610. I can ping the other switch's management IP (10.100.198.2 and 10.100.198.3) from the other respective switch. That leg of the VLAN works - however I cannot communicate with eth1.198's 10.100.198.1. I feel like I'm missing something elementary but what it is remains illusive to me. I suspect the issue is with the vconfig created eth1.198. It should pass the tagged VLAN 198 packets correct? But they cannot seem to get any further than the 5406. Communication on the existing VLAN 98 works fine. From the Debian box: eth1: eth1 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.0.1 Bcast:10.100.255.255 Mask:255.255.0.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12179786 errors:0 dropped:0 overruns:0 frame:0 TX packets:20210532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1586498028 (1.4 GiB) TX bytes:26154226278 (24.3 GiB) Interrupt:9 Base address:0xec00 eth1.198: eth1.198 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.198.1 Bcast:10.100.198.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1496 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:3528 (3.4 KiB) # cat /proc/net/vlan/eth1.198: eth1.198 VID: 198 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 72 total bytes transmitted 3528 total headroom inc 0 total encap on xmit 39 Device: eth1 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: # ip route 10.100.198.0/24 dev eth1.198 proto kernel scope link src 10.100.198.1 206.174.64.0/20 dev eth0 proto kernel scope link src 206.174.66.14 10.100.0.0/16 dev eth1 proto kernel scope link src 10.100.0.1 default via 206.174.64.1 dev eth0 # iptables -L -v Chain INPUT (policy DROP 6875 packets, 637K bytes) pkts bytes target prot opt in out source destination 41 4320 ACCEPT all -- lo any anywhere anywhere 11481 1560K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 107 8058 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- eth1 any 10.100.0.0/24 anywhere tcp dpt:ssh 701 317K ACCEPT udp -- eth1 any anywhere anywhere udp dpts:bootps:bootpc Chain FORWARD (policy DROP 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 156K 25M ACCEPT all -- eth1 any anywhere anywhere 215K 248M ACCEPT all -- eth0 eth1 anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth1.198 any anywhere anywhere 0 0 ACCEPT all -- eth0 eth1.198 anywhere anywhere state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 13048 packets, 1640K bytes) pkts bytes target prot opt in out source destination From the 5406: # show vlan ports trk12 detail Status and Counters - VLAN Information - for ports Trk12 VLAN ID Name | Status Voice Jumbo Mode ------- -------------------- + ---------- ----- ----- -------- 98 WIFI | Port-based No No Untagged 198 VLAN198 | Port-based No No Tagged

    Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >