Search Results

Search found 14989 results on 600 pages for 'street address'.

Page 496/600 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

• CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

  - by SJaguar13

  I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

  Read the article

• Windows 7 on a 64-bit computer

  - by GetFree

  I read on Wikipedia that Windows 7 on a 64-bit PC needs twice as much RAM as on a 32-bit PC. I understand why is that: every number stored in memory takes 8 bytes rather than just 4. That, in simple terms, means that your amount of RAM is reduced to half when you use Windows 7 on a 64-bit computer. Now, I have a Intel Core 2 Duo Laptop with Windows Vista right now (2 GB of RAM). My question is: Since Core 2 is a 64-bit architecture, if I upgrade to Windows 7 will my laptop be working as if it had just 1 GB of RAM? Or... to say it in other words: Having a 64-bit PC with Windows 7 do you need twice as much RAM as you need on a 32-bit PC to have the same performance? If I am right, then I'd say it's a terrible business to have a 64-bit computer and Windows 7 on it (I hope I am mistaken, though). Follow-up: After some answers, I'm realizing it's not the same thing to have a 32-bit OS on a 64-bit PC than a 64-bit OS on a 64-bit PC. Apparently, the problem of Windows 7 requiring twice as much RAM on 64-bit architectures is when you have both the OS and PC supporting 64 bits. I'd like new answers to address this issue. Also, is it possible to have more that 4 GB of RAM on a 64-bit PC using a 32-bit version of Windows?

  Read the article

• cannot connect to vpn server (error 721)

  - by callmeblessed

  Hi I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

• postfix not sending domain mail to mx

  - by orlandoresorts

  I'm trying to get postfix to forward email to my domain which is hosted by gmail. As I don't have any users on my server nor do I want to. Here's how I have things set up.. LEt's say you and I have a domain called mcdonalds.com the registrar has mcdonalds.com MX records pointing to gmail. (everything works for like a year) Now we set up a server to host a website. Then we create a mail account called [email protected] and send mail locally from the server using roundcube. This works. We can send mail to cnn.com we can send mail to serverfault.com we can email any/everyone. BUT we cannot send mail to our own domain mcdonalds.com So I cannot email [email protected] I cannot email [email protected] I cannot email [email protected] It gives the error: SMTP Error (450): Failed to add recipient "[email protected]" (4.1.1 : Recipient address rejected: User unknown in virtual mailbox table). I'm guessing because it is looking at the local server to find the mailbox and it doesn't exist. So how to I tell the server for any mail going to mcdonalds.com for [email protected] to send to my external mail server and NOT to lookup on the local www box we set up with zpanel. Any ideas?

  Read the article

• Win Svr 2003 DHCP Bad Addresses

  - by VinceM

  After looking at other posts I still can figure this out. I'll start at the beginning... I inherited this network and I'm not the most knowledgeable about networking... We have a AD DHCP Server that is also our DNS server, We were having some VPN issues (on the same server) and my boss decided to disable routing and remote access, which cleared the settings. We couldn't get it set back up correctly so we rolled back to a backup drive they created a number of months ago. Since rolling back I've had Bad_Address listings in DHCP and there is a number of duplicate records in the DNS Forward Lookup Zones. We have less than 50 devices on the network but I have over 90 Bad Addresses showing. This server is currently running but we get IP address conflicts all the time on pretty much all the computers. I have had people do release and renew but it didn't help... I have also deleted and re-added the scope to no avail either. Any help or ideas would be greatly appreciated and I apologize if I missed another post that has information to help. Thanks, Vince

  Read the article

• Postfix message ID originating process?

  - by Anders Braüner Nielsen

  Last night my postfix mail server(Debian Squeeze with dovecot, roundcube, opendkim and spamassassin enabled) started sending out spam from a single domain of mine like these: $cat mail.log|grep D6930B76EA9 Jul 31 23:50:09 myserver postfix/pickup[28675]: D6930B76EA9: uid=65534 from=<[email protected]> Jul 31 23:50:09 myserver postfix/cleanup[27889]: D6930B76EA9: message-id=<[email protected]> Jul 31 23:50:09 myserver postfix/qmgr[7018]: D6930B76EA9: from=<[email protected]>, size=957, nrcpt=1 (queue active) Jul 31 23:50:09 myserver postfix/error[7819]: D6930B76EA9: to=<[email protected]>, relay=none, delay=0.03, delays=0.02/0/0/0, dsn=4.4.2, status=deferred (delivery temporarily suspended: lost connection with mta5.am0.yahoodns.net[66.196.118.33] while sending RCPT TO) The domain in question did not have any accounts enabled but only a catchall alias set through postfixadmin - most emails were send from a specific address I use frequently but some were also sent from bogus addresses. None of the other virtual domains handled by postfix were affected. How can I find out what process was feeding postfix/sendmail or more info on where they originated? As far as I can tell php mail() wasn't used and I've run several open relay tests. I did a little tinkering(removed winbind from the server and ipv6 addresses from main.cf) after the attack and it seems to have subsided but I still have no idea how my server was suddenly sending out spam. Maybe I fixed it - maybe I didn't. Can anyone help figuring out how I was compromised? Anywhere else I should look? I've run Linux Malware Detect on recently changed files but nothing found.

  Read the article

• How to access a port via OpenVpn only

  - by Andy M

  I've set up an openvpn server alongside an apache website that can only be accessed on port 8100 on the same machine. My /etc/openvpn/server.conf file looks like this: port 1194 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/server.crt key ./easy-rsa2/keys/server.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem # Diffie-Hellman parameter server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt # make sure clients can still connect to the internet push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 Now I tried to let only clients connected to the vpn network access the website on apache via port 8100. So I defined a few iptables rules: #!/bin/sh # My system IP/set ip address of server SERVER_IP="192.168.0.2" # Flushing all rules iptables -F iptables -X # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Allow incoming access to port 8100 from OpenVPN 10.8.0.1 iptables -A INPUT -i tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # outgoing http iptables -A OUTPUT -o tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT Now when I connect to the server from my client computer and try to access the website on 192.168.0.2:8100, my browser can't open it. Will I have to forward traffic from tun0 to eth0? Or is there anything else I'm missing?

  Read the article

• Host name change breaking http? Fedora

  - by Dave

  OK so I have been messing around on my development server. It has been a while since I have had my head in linux and I suspect I have broken something. I have SSH running and that is working fine. I also have HTTP and I had FTP running also. Earlier today I decided I wanted to rename the machine so I updated the /etc/hosts file and /etc/sysconfig/network. I also changed the server name in the httpd.conf. I rebooted the machine and reconnected to SSH fine. Later I was messing around with the FTP service (trying to tighten up the user security) and when i tried to connect remotely to FTP no joy, it said cannot connect. I thought that was weird but had planned to remove ftp as we will be using github so removed ftp and moved on. Then I tried to connect to the website but major fail. even connecting to the IP address is failing. I used lynx to connect to the localhost and there was my site so something going on at server level. I thought maybe something up with iptables but I have not changed them but tried adding http but still no joy. I have a - Fedora release 17 (Beefy Miracle) NAME=Fedora VERSION="17 (Beefy Miracle)" ID=fedora VERSION_ID=17 PRETTY_NAME="Fedora 17 (Beefy Miracle)" ANSI_COLOR="0;34" CPE_NAME="cpe:/o:fedoraproject:fedora:17" Fedora release 17 (Beefy Miracle) Fedora release 17 (Beefy Miracle) Linux version 3.3.4-5.fc17.x86_64 ([email protected]) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 7 17:29:34 UTC 2012 This is my iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination Like I say I can use SSH no issue but http although running is a no go from a remote computer. Any ideas?

  Read the article

• Understanding tcptraceroute versus http response

  - by kojiro

  I'm debugging a web server that has a very high wait time before responding. The server itself is quite fast and has no load, so I strongly suspect a network problem. Basically, I make a web request: wget -O/dev/null http://hostname/ --2013-10-18 11:03:08-- http://hostname/ Resolving hostname... 10.9.211.129 Connecting to hostname|10.9.211.129|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: ‘/dev/null’ 2013-10-18 11:04:11 (88.0 KB/s) - ‘/dev/null’ saved [13641] So you see it took about a minute to give me the page, but it does give it to me with a 200 response. So I try a tcptraceroute to see what's up: $ sudo tcptraceroute hostname 80 Password: Selected device en2, address 192.168.113.74, port 54699 for outgoing packets Tracing the path to hostname (10.9.211.129) on TCP port 80 (http), 30 hops max 1 192.168.113.1 0.842 ms 2.216 ms 2.130 ms 2 10.141.12.77 0.707 ms 0.767 ms 0.738 ms 3 10.141.12.33 1.227 ms 1.012 ms 1.120 ms 4 10.141.3.107 0.372 ms 0.305 ms 0.368 ms 5 12.112.4.41 6.688 ms 6.514 ms 6.467 ms 6 cr84.phlpa.ip.att.net (12.122.107.214) 19.892 ms 18.814 ms 15.804 ms 7 cr2.phlpa.ip.att.net (12.122.107.117) 17.554 ms 15.693 ms 16.122 ms 8 cr1.wswdc.ip.att.net (12.122.4.54) 15.838 ms 15.353 ms 15.511 ms 9 cr83.wswdc.ip.att.net (12.123.10.110) 17.451 ms 15.183 ms 16.198 ms 10 12.84.5.93 9.982 ms 9.817 ms 9.784 ms 11 12.84.5.94 14.587 ms 14.301 ms 14.238 ms 12 10.141.3.209 13.870 ms 13.845 ms 13.696 ms 13 * * * … 30 * * * I tried it again with 100 hops, just to be sure – the packets never get there. So how is it that the server does respond to requests via http, even after a minute? Shouldn't all requests just die? I'm not sure how to proceed debugging why this server is slow (as opposed to why it responds at all).

  Read the article

• apache2 server running ruby on rails application has go daddy cert that works in chrome/firefox and ie 9 but not ie 8

  - by ryan

  I have a rails application up on a linode ubuntu 11 server, running apache2. I have a cert purchased from godaddy, (where we also bought our domain) and the cert is installed on my server. Part of my virtual host file: ServerName my_site.com ServerAlias www.my_site.com SSLEngine On SSLCertificateFile /path/my_site.com.crt SSLCertificateKeyFile /path/my_site.com.key SSLCertificateChainFile /path/gd_bundle.crt The cert works fine in Chrome, FireFox and IE 9+ but in IE 8- I get this error: There is a problem with this website's security certificate. The security certificate presented by this website was issued for a different website's address. I'm hosting multiple rails apps on this same server (4 right now plus some old php sites that don't need ssl). I have tried googling every possible combination of the error/situation that I could think of but at this point I'm shooting in the dark. The closest I could come up with is that some versions if IE don't support SNI. But that doesn't apply here because I am getting the warning on windows 7 machines running IE 8, and the SNI only seemed to apply to IE 8 if the operating system was windows XP. So why is this cert being accepted by all browsers but giving me a warning in IE 8? Edit: So doing a little more digging and I figured out some more. It turns out this is effecting IE 9 as well. However the problem seems to be that IE is not traversing the ssl chain to get to the right cert. FireFox and Chrome when I go to view certificate show the correct one, but IE is showing one of our other sites certificates. REAL QUESTION HERE: That being the case why is IE not getting the right certificate when others are and how do I fix it?

  Read the article

• Why do I have to log into hotmail twice?

  - by Tony Lee

  I just recently noticed I have to attempt a login into hotmail twice before it succeeds. Although I'm using Google Chrome (3.0.195.21), the symptoms are well described in a Mozilla thread. In short, I'm told: The e-mail address or password is incorrect. Please try again. The thread on mozilla's site that supposed to describe the latest details (and the 1st hit on google when I search for "hotmail login twice") requires an account to read so I'm hoping someone here has a good synopsis of what the cause is. I normally start at hotmail.com, which redirects to login.live.com/.... I can login by starting at mail.live.com, using IE8 or attempting a 2nd login. Oddly, if I start at login.live.com Chrome tells me there is a redirect loop. Does anyone know or have a public link to the root cause of the double login? (it is a hotmail account I'm login into) EDIT - Caused by my 'restricting how 3rd parties can use cookies'. If I allow all cookies, it works first time.

  Read the article

• if the file changes send email about diff

  - by user62367

  I have 2 script. Script "A", Script "B". Script A is regulary watching the dhcpacks [dhcp release is configured to 2mins] in the logs, for the past 2 minutes. It writes the MAC addresses to a file [/dev/shm/dhcpacks-in-last-2min.txt] every 2 minutes. Ok, this is working, active clients are in this file. Super! Script B: On pastebin I'm trying to create a script, that watches the changes in /dev/shm/dhcpacks-in-last-2min.txt file ( every 1 sec). Ok. But: my watcher script [the pastebined][1] is not working fine - sometime it works, sometime it sends that someoneXY logged out`, but it's not true! Nothing happened, and the problem is not in the Script A. Can someone help me point out, what am I missing? How can I watch a file (in every sec), that contains only MAC addresses, and if someone doesn't get dhcpack in 2 minutes, the file /dev/shm/dhcpacks-in-last-2min.txt changes, and that clients MAC address will be gone from it, and i need to know, who was it [pastebined my script - but somethings wrong with it]. Thank you for any help..I've been pathing my script for days now.. :\

  Read the article

• Windows Server 2008 R2 Virtual Network Setup

  - by jpearl01

  Hi all, Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

  Read the article

• Outlook Web Access and Rules

  - by Chris_K

  One of my clients would prefer that I have an email address in their domain. They run SBS 2k8 so I just monitor my email from them (and their clients) via Outlook Web Access. No POP or IMAP access, only OWA. No VPN access either, so no "real" Outlook. Just OWA. I figured I'd build an outlook rule to forward mail from that account to an account that I monitor -- that way I won't need to keep IE open all the time to monitor email. However, I just can't seem to get the dang rule to work and am hoping someone here can give me a nudge or pointer. From OWA, I click on Options - Rules and edit my current rule that kinda works. The rule is supposed to forward the email sent to me and then move it to a folder. It does move it to a folder... just never seems to forward it. The rule looks like this: Apply this rule after the message arrives where my name is in the To box redirect it to [email protected] and move it to the Forwarded to MyEmail folder except with "ALERT" in the subject As I mentioned, mail does get moved, just never redirected. I've tried "Forward" and "redirect" actions with the same results. Any suggestions?

  Read the article

• Contacts in Outlook 2003/2007, some questions

  - by Ernst

  If I create a distribution list and then select members, can I see different fields than the default ones? In 2007 there are radio buttons for 'name only' and 'more columns', but the latter does seem to only result in no results at all, regardless of which address book I choose. In 2003 there is no such thing. Is there a plug in that will break up the recipients (whether they be to, cc, or bcc) in groups of X, and send then a number of mails as required? Our host allows only 50 recipients per mail and only 300 total recipients per 5 minutes. I know the email client blat has exactly this functionality, but it does not seem to be able to connect to the exchange server to get the contacts needed. Could I maybe set outlook to send to blat which then does the breaking up as necessary? Can I (or is there a plug in for this) export only part of the contacts instead of all of them? Note that we send mail outside our organisation via our web host where we've got a few mailboxes, and we use our exchange (2000) server only internally, the few people that can send email to the outside world have an external mailbox as well as their exchange account defined. I might be able to convince our general boss that we can simply give (some) people the ability to send outside via exchange, but I might just as well not succeed. Alternatively, is there another program that can connect to exchange to get the contacts (selected based on categories) and then send via smtp in groups with delays between the mails?

  Read the article

• How to manage multiple email addresses on multiple domains in Exchange

  - by CAD bloke

  Using Hosted Exchange Server, mostly because I use an iPhone, webmail & Outlook on 2 laptops. I want to keep everything consistent and unfragmented. Also, I want push notifications. I have 2 domains, a professional one & a personal one. Each domain has about 5 (give or take) email addresses I use for various purposes. Each domain also has a few parked domains (.net, .org, .info) aliased to the .com domain. I would like to keep emails from the 2 domains separated. Do I need an extra mail box, meaning extra expense or can I create another Exchange user on the same mailbox and create an extra account in Outlook? In either case I will have to wait for iOS4 on the iPhone to manage 2 Exchange accounts. Or am I better off just using a set of rules and folders? The aliased domains are another joy to behold entirely. It looks like I will have to add each email address variant individually. Alternatively, I reckon I may just leave the aliased domains at the pop3 host and let Outlook gather those as edge-cases. Surely I can't be the only one making my life this difficult. Anyone out there done this? From the left field - is this (much) easier in gMail? I'm not committed to Exchange (yet). Previously I used Outlook as a pop3 client with a set of filters to direct incoming traffic to folders. This worked with the aliased domains because my host directed all the aliased TLDs to the same mailbox.

  Read the article

• DNS Zone file and virtual host question (repost because my question got moved and now I can't comment on the original for some reason)

  - by Jake

  Sorry this is a repost, the original question got moved to here form stack overflow and for some reason I can't comment or respond to answers on that one anymore. Hi all, I'm trying to set up a virtual host for redmine.SITENAME.com. I've edited the httpd.conf file and now I'm trying to edit my DNS settings. However, I'm not sure exactly what to do. Here's an snippet of what's already in the named.conf file (the file was made by someone else who is unreachable): zone "SITENAME.com" { type master; file "SITENAME.com"; allow-transfer { ip.address.here.00; common-allow-transfer; }; }; I figure if I want to get redmine.SITENAME.com working, I need to copy that entry and just replace SITENAME.com with redmine.SITENAME.com but will that work? I was under the impression I needed a .db file but I don't see any reference to one in the current named.conf file. I also don't see any .db files or files named SITENAME in named.conf's directory. Any ideas where these illusive pre-existing db files could be?

  Read the article

• Can't display RSSI values in Wireshark

  - by Giovanni Soldi

  I am trying to analyze the up-link Wireless traffic generated by my Sony Ericsson phone and captured by my D-Link router, on which I installed the DD-WRT firmware. To do this, first I log in the router and enable the prism0 interface by typing the command: wl -i eth1 monitor 1 and then I start to capture the packets by typing: tcpdump -i prism0 ether src xx:xx:xx:xx:xx:xx -s0 -w /tmp/smbshare/sony_ericsson_test.pcap where xx:xx:xx:xx:xx:xx is the MAC address of my Sony Ericsson phone. After a while I transfer the sony_ericsson_test.pcap file to my computer and open it with Wireshark program. In order to display the RSSI values I follow this procedure: Edit - Preferences... - Columns - Press "Add" button - As "Field type" I choose "IEEE 802.11 RSSI" and finally I choose name "Power" and click on "Apply" button. The problem is that the column "Power" is empty with no RSSI values. Does Anyone has a clue on why are RSSI values not displayed? Maybe I am missing a passage. Looking forward to hearing from anyone of you! Thanks in advance for your help!

  Read the article

• Very slow connection to xserve via afp or smb

  - by Mhoffman13

  Help. File transfer and connection speed to our Xserve are painfully slow from newly purchased iMacs. The Xserve is only used as a file server, its running 10.4.11. The problem seems to be only happening on brand new iMacs running 10.6.3. When connected either over afp or smb copying files is many times slower than usual. Other machines on the network running either 10.4 or 10.5 have a normal connection speed. To try to rule out OS incompatibility I connected the new iMac running 10.6 to another computer running 10.4 over the network. The file transfer speed was fast as normal. So it seems the problems lies with the X serve (maybe). The afp logs either access or error don't show anything unusual. One thing that did look different was when the imac was connected to the Xserve the user had its id listed as its IP address. The other machines connected, had the id of broadcasthost. I also noticed that when connected from the new iMac I can only see one of the mirrors. When any other computer connects both mirrors are shown. Tried a restart of the Xserve but the problem persists. Thanks in advance for any advice

  Read the article

• Block SMTP session with sender domain which doesn't itself accept SMTP connection.

  - by bignose

  I'm administrating a mail service for a small business. Their mail host's internet connection is an ADSL service with a permanent IP address. Unfortunately, many misconfigured mail systems will happily deliver to this host, but, when the host attempts to send mail back (e.g. a bounce notice, or a normal response from someone), the declared sender's domain has an MX which refuses to receive connections from this host. That misconfiguration makes their system a one-way mail sender, which is a problem. How can I configure Postfix on this customer's mail host to refuse SMTP sessions that declare a sender domain which itself refuses SMTP from this host? That is, if the SMTP client declares a domain that we can't make SMTP connections back to, then there's not much point accepting the incoming connection in the first place. Note that I'm not, as some commenters have assumed, talking about checking whether the SMTP client will receive messages. The check I want is whether the declared sender's domain (regardless of who the current SMTP client is) will accept SMTP connections from here. In other words: when we get around to sending a message back, we'll need the sender's domain to accept SMTP connections; I want to do that check before accepting the incoming session. I'm imagining a late check (after the low-cost checks to winnow most of the rubbish connections) that keeps the client on the other end while it attempts an SMTP client connection back to the declared domain of the sender. If that connection is rejected, the incoming one is also rejected. I'm also open to other suggestions for how this problem might be addressed (short of not using this mail host at all, which isn't an option).

  Read the article

• Redirection of outbound UDP port NTP.

  - by pboin

  For my residential service, I changed ISPs to Zoom/Armstrong. Just after that, my NTP daemons stopped working. I dug deep and diagnosed the problem: Unprivileged ports are getting out. When i run 'ntpdate' for example, I go out on a high, unprivleged port, and get a response on UDP 123. That's fine. The 'ntpd' daemon though, expects to go out on 123 and get its reply there as well. This must be a common problem, because it's directly addressed in the NTP troubleshooting guide. Just to see what would happen, I wrote a detailed email to the general support address at Armstrong. They replied almost immediately with a complete technical answer! They have everything <1024 blocked, except for a few ports to support outbound VPN. So, the question: Can I use IPtables to essentially re-write my outbound UDP 123 up to 2123 or something like that? If I do, does there need to be a corresponding 2123-123 rule to translate the reply? This seems like NAT, but with ports, not addresses. True, I could run ntpdate from cron, but that loses all of the adjustment smarts of NTP.

  Read the article

• Exchange 2010 issuing NDRs to Hotmail/Live & few other domains on receipt of message

  - by John Patrick Dandison

  I'm working through a beast of an issue at the moment. Exchange 2010 single server on prem Hybrid deployment to Office 365 ESMTP filtering turned off on ASA Certain domains (most consistently, Hotmail/Live) cannot send us mail. At one point, we couldn't send out either, but I created a new Send Connector that forces HELO instead of EHLO. I turned on SMTP logging, an example of the failed inbound message connection is below. I've read that it could be that reverse DNS is the problem, i.e., the exchange banner smtp address needs to reverse-DNS back to the same IP. Since it's the default exchange connector, its banner is the server's name, but the DNS name of the MX record is different. I'm waiting for the PTR records to update to reflect the internal name as well. Is that the right direction? Is this all DNS or something different? SMTP Session Log (single failed session for illustration): SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders 220 ExchangeServerName.internalSubDomain.example.com Microsoft ESMTP MAIL Service ready at Mon, 15 Oct 2012 09:57:24 -0400 EHLO col0-omc3-s4.col0.hotmail.com 250-ExchangeServerName.internalSubDomain.example.com Hello [65.55.34.142] 250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS 250-AUTH NTLM LOGIN 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250-XEXCH50 250-XRDST 250 XSHADOW MAIL FROM:<[email protected]> 08CF5268DABBD9AA;2012-10-15T13:57:24.564Z;1 250 2.1.0 Sender OK RCPT TO:<[email protected]> 250 2.1.5 Recipient OK XXXX 1282 LAST Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXX from COL002-W38 ([65.55.34.135]) by col0-omc3-s4.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command " XXXX 15 Oct 2012 06:57:24 -0700" Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXXXX <[email protected]> Tarpit for '0.00:00:05'

  Read the article

• Windows 7 BSOD on startup

  - by Cristy

  I got a BSOD today after getting home from 11 hours of work... It seems to work in SAFE MODE (sometimes, not always) The BSOD says: SYSTEM_SERVICE_EXCEPTION STOP: 0x0000003b WimFsf.sys - Address FFFFF88001A6B76B base at FFFFF88001A600000, DateStamp 4a5bc362. Sometimes it shows the welcome screen, shows the destkop for a few seconds and then BSODs Already did: unplugged all the USB devices reset the CMOS I haven't installed any new software recently. What should I do? EDIT: I've managed to get into safe mode and it seems to works fine. When I go into normal mode it shows the desktop then it freezes... Is it more likely to be a software or hardware problem? EDIT2: I've managed to get into normal mode by disabling all the non-microsoft services & startup programs. One more thing: When I shut down my PC, on the "Logging off" screen appear some artifacts. I don't think it's because of my graphics card cause I've opened Black OPS and it worked fine. It's so strange... It still BSODS on startup (but there a ~=10% that it will not), and when it doesn't BSOD's it works fine...

  Read the article

• D-LINK DIR-615 router keeps giving my wireless devices bad ip addresses

  - by mlsteeves

  I have a D-LINK DIR-615 router, and wired devices have no problem getting an IP, however; wireless devices end up with a 169.254.. address (subsequently, they cannot access the internet through the router). I have removed all wired connections from the router, so there is no other dhcp server running. I've also gone back to the store, and replaced it with another, thinking that maybe it was defective. According to the router, it gave 192.168.0.101 to the wireless device. According to the wireless device it got 169.254.67.71. I've tried both a laptop and an iPod Touch, both exhibit the same behaviour. Has anyone seen this type of behaviour, or have any ideas of stuff to try? NEW INFORMATION I looked at the logs on the router, and when the wireless device tries to connect, this is what is logged: Sep 10 18:13:39 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:31 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:26 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:23 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:21 UDHCPD sending OFFER of 192.168.0.111 I connected a computer directly to the router, and here is what it looks like: Sep 10 18:14:18 UDHCPD Inform: add_lease 192.168.0.110 Sep 10 18:14:14 UDHCPD sending ACK to 192.168.0.110 Sep 10 18:14:14 UDHCPD sending OFFER of 192.168.0.110 Not sure if that helps or not.

  Read the article

• how to block spam email using Microsoft Outlook 2011 (Mac)?

  - by tim8691

  I'm using Microsoft Outlook 2011 for Mac and I'm getting so much spam I'm not sure how to control it. In the past, I always applied "Block Sender" and "Mark as Junk" to any spam email messages I received. This doesn't seem to be enough nowadays. Then I've started using Tools Rules to create rules based on subject, but the same spammer keeps changing subject lines, so this isn't working. I've been tracking the IP addresses they also seem to be changing with each email. Is there any key information I can use in the email to apply a rule to successfully place these spam emails in the junk folder? I'm using a "Low" level of junk email protection. The next higher level, "high", says it may eliminate valid emails, so I prefer not to use this option. There's maybe one or two spammers sending me emails, but the volume is very high now. I'm getting a variation of the following facebook email spam: Hi, Here's some activity you have missed. No matter how far away you are from friends and family, we can help you stay connected. Other people have asked to be your friend. Accept this invitation to see your previous friend requests Some variations on the subject line they've used include: Account Info Change Account Sender Mail Pending ticket notification Pending ticket status Support Center Support med center Pending Notification Reminder: Pending Notification How do people address this? Can it be done within Outlook or is it better to get a third party commercial software to plug-in or otherwise manage it? If so, why would the third party be better than Outlook's internal tools (e.g. what does it look for in the incoming email that Outlook doesn't look at)?

  Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >