Search Results

Search found 16499 results on 660 pages for 'off rhoden'.

Page 497/660 | < Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >

  • WAN Optimization for Small Office/Home Office

    - by TiernanO
    I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

    Read the article

  • Postgresql Data Aggregation over WAN Securely

    - by Zach
    Hey guys, Need some advice on how to proceed with this situation: My current scenario is that I have several postgresql (50+) boxes deployed throughout various locations and data centers and a beefy postgresql box setup at a homebase location. All of the deployed boxes have identical database layouts. I'm looking for a solution that would allow for a few things. I realize some of these options overlap and some might only contain mutually exclusive solutions. However, I'm interested to hear your thoughts :) Remotely query the deployed boxes and pull the results back to the homebase box for processing. Nightly (remote) "sync" or dump the deployed boxes' databases to a master database on the homebase box. Remotely push a table entry to all of the deployed boxes from the homebase box. Ensure security of data in transit, and remotely deployed boxes. Up to this point I've been floating on a homebrew multithreaded python/perl system that SSH's into these boxes remotely, which are ACL'ed off to the homebase server and pulls (or pushes) the raw query results over the ssh connection. I have even touched #2 (remote syncing) as I know that would get nasty really quick. I'm interested in any ideas for a more elegant solution that can scale up and stick to my FreeBSD/Linux environment.

    Read the article

  • How can I tell why I have access to a file share on Windows Server

    - by Joel
    I have a file share on a Windows 2008 R2 server in a AD domain (call it \SECURESERVER\STUFF) and I am not sure if I have the share and folder permissions set up right. I noticed the problem when I set up new server (WORKGROUP\FOREIGNSERVER) that was not joined to the domain and tried to copy some files off of \SECURESERVER\STUFF. I was surprised to find that when I tried to access the files, it did not prompt me for a username and password and proceeded to give me full access to the files. That worried me so I tried the same thing on some workstations that were not in the domain and they did NOT have the same behavior (they did prompt for a username/password as desired/expected). So, I think there is something peculiar about FOREIGNSERVER. I am logging into it with a local admin account, but my domain and SECURESERVER should know nothing of this server. I've carefully gone through the share and folder permissions on the share but I can't find the reason that FOREIGNSERVER has access. How can I find out why FOREIGNSERVER has access to SECURESERVER?

    Read the article

  • proxy pass domain FROM default apache port 80 TO nginx on another port

    - by user10580
    Im still learning server things so hope the title is descriptive enough. Basically i have sub.domain.com that i want to run on nginx at port 8090. I want to leave apache alone and have it catch all default traffic at port 80. so i am trying something with a virtual name host to proxy pass to sub.domain.com:8090, nothing working yet and go no idea what the right syntax could be. any ideas? most of what i found was to pass TO apache FROM nginx, but i want to the do the opposite. LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_http_module modules/mod_proxy_http.so <VirtualHost sub.domain.com:80> ProxyPreserveHost On ProxyRequests Off ServerName sub.domain.com DocumentRoot /home/app/public ServerAlias sub.domain.com proxyPass / http://appname:8090/ (also tried localhost and sub.domain.com) ProxyPassReverse / http://appname:8090/ </VirtualHost> when i do this i get [warn] module proxy_module is already loaded, skippin [warn] module proxy_http_module is already loaded, skipping [error] (EAI 2)Name or service not known: Could not resolve host name sub.domain.com -- ignoring! and yes, the app is working (i have it running on port 80 with another subdomain) and it works at sub.domain.com:8090

    Read the article

  • Computer loop restarts on Windows loading

    - by Robinson G.
    My computer restarts, just after or during Windows loading (4 squares getting together), or after some time on the desktop IF I'm idle. In order to start the computer I either have to swap my RAM (24Go) in differents DIMM slots, for example (I have 4 slots) : 1-2-4 or 2-3-4 or 1-3-4, not the same position each boot or it restarts in a loop... I can also change the ram timing from 1.5 to 1.6V and it starts, at the next reboot I have to change it again to 1.5 or it won't boot... And If after all, I succeed to boot, I have to use the computer for about 10 minutes, and it's ok, if I don't, it restarts by itself after some minutes. If I stay on the BIOS, It's all OK, I can stay for a whole year without restarting. I have check my RAM on Memtest (4*8G SDRAM DDR3) : OK I have check without graphic card : Still the same. I tried to reset the bios stack by getting it off and on : Still the same. I tried to reset my BIOS, and many settings about the RAM in the menu : Still the same. CPU temps are just fine (around 35°C) I was thinking ofc about the motherboard but I want to be sure. Motherboard : MSI zh77a-g43 RAM : 4*8G Dual Mode or not (depends on the number I put ofc.) PSU : 600W (enough to run all the config) CPU : i7 3770 non K

    Read the article

  • ATI Radeon 5670 Won't Show Resolutions over 1400x900

    - by Phil Sandler
    Just got my new Dell computer with Windows 7 and an ATI Radeon 5670. I attached it to my current monitor, which is a Samsung 24" (2443bwt). Windows 7 does not allow me to display in resolutions greater than 1400 x 900. The setup through a VGA cable into the VGA port of the card. The card also has a DVI port, but I need to use the VGA port because a KVM that supports VGA only. My old PC (which is Windows XP, GeForce 8600 video) can display in 1900 x 1200 on the same monitor (which is what I want) and even higher. It does this through a vga cable also connected to the KVM (through the DVI port but using an adapter). I have tried the same setup (DVI = VGA adapter) on the new PC and nothing changed. I have tried: Updating the drivers via Windows "Update Driver" (says they are current) Installing the updated version of the drivers from ATI (made no difference) Installing Powerstrip (all the options I would need for a custom resolution are greyed out) Installing the drivers/software from ATI caused the ATI Catalyst Control Center software to stop functioning, so I can no longer even start it. I have found some references to other people having this problem and instructions on cleaning the software off and reinstalling it (as uninstalling normally doesn't solve it). I will try this tonight. In any case, I didn't see any options in CCC that would allow me to override the settings for max resolution. However I didn't tinker with it too much before I tried updating the drivers, so I may have missed a setting. I contacted Samsung via online chat and they say it's a problem with the video card/driver (of course--what else would they say?). Any thoughts on what else I could try?

    Read the article

  • Doesn't work Nginx + SSI

    - by boopidoopi
    I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

    Read the article

  • Apache2 doesn't serve PHP-scripts correctly [closed]

    - by cmbrnt
    I've run into a problem with my Apache 2.2.16 configuration, running on Debian Squeeze. The problem is that it stopped serving PHP5-scripts completely. When I try to access the sites with Google Chrome, it instead downloads a file called "download", which contains the contents of the script. This is of course not a good thing. It does serve common html-files perfectly... I've been at this for quite a while now, and after all the googling and troubleshooting, I thought it would be a good time to ask you guys. Here's what I've got: The php5 and libapache2-mod-php5 packages are installed /etc/apache2/mods-available contains both php5.load and php5.conf, and these are symlinked from the mods-enabled directory The /etc/php5/ directory is left untouched since the installation. Here's the contents of /etc/apache2/mods-available/php.load: LoadModule php5_module /usr/lib/apache2/modules/libphp5.so And /etc/apache2/mods-available/php.conf: <IfModule mod_php5.c> <FilesMatch "\.ph(p3?|tml)$"> SetHandler application/x-httpd-php </FilesMatch> <FilesMatch "\.phps$"> SetHandler application/x-httpd-php-source </FilesMatch> <IfModule mod_userdir.c> <Directory /home/*/public_html> php_admin_value engine Off </Directory> </IfModule> </IfModule> What am I missing? This is a server with modified virtual hosts and the like, so I might have changed some settings which causes this problem, but simply purging and reinstalling is not an option so far, since the configuration is quite extensive. Any help would be great. Thanks.

    Read the article

  • Limited connections to Ubuntu 12.04 server

    - by Luis M. Valenzuela
    I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

    Read the article

  • How to tell nginx to honor backend's cache?

    - by ChocoDeveloper
    I'm using php-fpm with nginx as http server (I don't know much about reverse proxies, I just installed it and didn't touch anything), without Apache nor Varnish. I need nginx to understand and honor the http headers I send. I tried with this config (taken from the docs) but didn't work: /etc/nginx/nginx.conf: fastcgi_cache_path /var/lib/nginx/cache levels=1:2 keys_zone=website:10m inactive=10m; fastcgi_cache_key "$scheme$request_method$host$request_uri"; /etc/nginx/sites-available/website: server { fastcgi_cache website; #fastcgi_cache_valid 200 302 1h; #fastcgi_cache_valid 301 1d; #fastcgi_cache_valid any 1m; #fastcgi_cache_min_uses 1; #fastcgi_cache_use_stale error timeout invalid_header http_503; add_header X-Cache $upstream_cache_status; } I always get "MISS" and the cache dir is empty. If I uncomment the other directives, I get hit, but I don't want those "dumb" settings, I need to control them within my backend. For example, if my backend says "public, s-maxage=10", the cache should be considered stale after 10 secs. Instead, nginx will store it for 1h, because of these directives. I was thinking whether I should try proxy_cache, not sure what's the difference. In both fastcgi and proxy modules docs it says this: The cache honors backend's Cache-Control, Expires, and etc. since version 0.7.48, Cache-Control: private and no-store only since 0.7.66, though. Vary handling is not implemented. nginx version: nginx/1.1.19 Any thoughts? pd: I also have the reverse proxy that is offered by Symfony2 (which I turn off to use nginx's). The headers are interpreted correctly by it, so I think I'm doing it right.

    Read the article

  • Configuring nginx to check for hard files in only a few directories,

    - by Evan Carroll
    For a node.js project I'm doing, I have a tree like this. +-- public ¦   +-- components ¦   +-- css ¦   +-- img +-- routes +-- views Essentially, I have the root to be set to public. I want all requests destined to /components/ /css/ /img/ To check to see if their appropriate destinations exist on disk. However, I don't want requests to other directories to even run an IO operation, /foo/asdf /bar /baz/index.html None of those should result in the disk being touched. I have a stansa that does the proxy to node.js, location @proxy { internal; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://localhost:3030; proxy_redirect off; } I just would like to know how to arrange this. My problem would be easily solved if try_files took a single argument, but it always wants a file first. location /components/ { try_files $uri, @proxy } location /css/ { try_files $uri, @proxy } location /img/ { try_files $uri, @proxy } However, there is nothing that I can find that will give me, location / { try_files @proxy } How do I get the effect I want?

    Read the article

  • Limited bandwidth and transfer rates per user.

    - by Cx03
    I searched for a while but couldn't find anything concrete, hopefully someone can help me. I'm going to be running a Debian server on a gigabit port, and want to give each user his/her fair share of internet access. The first objective is easy - transfer rates (speed) per user. From what I've looked at, IPTables/Shorewall could do the job easy. Is this easy to setup, or could one of you point me at a config? I was hoping to limit users at 300mbit or 650mbit each. The second objective gets complicated. Due to the usage of the boxes, most of the traffic will be internal network traffic that does NOT get counted to the quota. However, I still need to limit the external traffic, and if they go over, cut off access (or throttle traffic to a very low speed (10mbit?)). Let's say the user has a 3TB external traffic limit. The IF part is: If the hostname they are exchanging the traffic with DOES NOT MATCH .ovh. or .kimsufi. (company owns multiple TLDs), count to the quota. Once said quota exceeds 3TB, choke them. Where could I find a system to count that for me? It would also need to reset or be able to be manually reset on a monthly basis. Thanks ahead of time!

    Read the article

  • Hard Disk based storage library

    - by Ryan M.
    We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

    Read the article

  • Apache forwarding to tomcat shows a blank page

    - by MNS
    I have an application running on tomcat at http ://www.example.com:9090/mycontext. The host name in server.xml points to www .example.com. I do not have localhost anymore. I am using apache to forward requests to tomcat using mod_proxy. Things work fine as long as the ProxyPath is /mycontext. The server name setup in virtual host is www .abc.com and http ://www.abc.com/mycontext works fine. However I would like to ignore the context path and simply use http://www.abc.com/ to forward requests to http://www.example.com:9090/mycontext. When I do this, apache shows me a blank page. What am I missing here? I have not changed anything in server.xml except the default host to www .example.com. <VirtualHost *:80> ServerName www.abc.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://www.example.com:9090/mycontext ProxyPassReverse / http://www.example.com:9090/mycontext </VirtualHost> Thanks

    Read the article

  • Every month, scheduled task fails and password must be reset - why?

    - by Ducain
    [NOTE: I posted this originally at StackOverflow but it got no traction there - reposting here.] We have a bit of software installed at a few client locations that runs (via Windows task scheduler) a few times each day. In ONLY ONE of the client locations, we have a unique problem: each month, the task will stop working, after running every day for weeks. Twice now it's failed on the 2nd of the month. When I walk the client through troubleshooting it, we've found that it can't start - access denied. To fix it, we simply re-enter the same exact password, and then off it goes happy as a clam. I've never heard of this issue, and their IT people say they don't have anything running once a month that might cause that. I'm at a complete loss here. Any ideas as to why this might be happening? Further details: Windows XP pro machine. Task is being fired with credentials from a local admin account. Computer is always on, and connected to the net.

    Read the article

  • Active Directory server down, recovering without reinstalling

    - by whatever
    My Windows 2003 server suddenly ceased to function as a DC (this server is the only DC of the domain). All AD related services are down. The only way I can login to the AD is physically to the machine. Everytime I access an AD-related service (e.g. "AD users and computers") I get the below error: Naming information cannot be located because: The specified directory service attribute or value does not exist. Contact your system administrator to verify that your domain is properly configured and is currently online. I found the below system event which matches the time when the issue started, this re-occurs everytime I reboot the server. NTDS General | Global Catalog | Active Directory was unable to establish a connection with the global catalog. Additional Data Error value: 1355 The specified domain either does not exist or could not be contacted. Internal ID: 3200d33 I started the troubleshooting with DNS. Netdiag throws the below error although I think this is simply a consequence of not being able to access the Global Catalog. The procedure entry point DnsGetPrimaryDomainName_UTF8 could not be located in the dynamic link library DNSAPI.dll. Anyway DNS seems OK because I can ping the DC FQDN from the DC itself. I found the below solution which is supposed to help by doing some cleanup of the metadata: http://support.microsoft.com/kb/216498 If I follow procedure 1 here is what I get at step 9: no current site Domain - DC=<mydomain>,DC=<com> no current server no current naming context I can continue the procedure until step 14. I haven't tested step 15 as my understanding is that I will have to reinstall the whole AD again. Is there any way I can recover my AD from there without having to reinstall the whole thing? Update: Yes, the server was powered off/on because reboot would take forever (not because I thought power cycling the unit would fix it more than a reboot).

    Read the article

  • Network driver for Hyper-V restore from Windows Home Server

    - by Philipp Schmid
    I have backed up Windows Server 2008 running virtualized on Hyper-V to a Windows Home Server 2008 SP1 (I know I should have backed up the VHD instead). Now I need to restore the contents of the VM from WHS. I have created a restore CD ISO and used it to create a new VM. It all works as advertised up to the point where the restore process wants to load the network drivers (it only finds 4 disk drivers on the restore CD. but no network drivers). So I created a virtual floppy and copied the contents of 'Home Server Drivers for Restore onto it. But no luck! I have tried moving the 4 subdirectories into the root of the floppy, but that didn't work either. Finally, I started another instance of the WS 2008 to identify the network driver that the virtualized instance is using (%WINDOWS%\system32\drivers\netvsc60.sys) and copied that file onto the virtual floppy, without success. Does anyone have any suggestions on how to get networking working on a Hyper-V instance running off the Windows Home Server Restore CD? UPDATE: As suggested by delenda, I have added a legacy network adapter to my VM, and indeed I now get a network driver listed! However, the WHS it still not found, even after entering the home server name manually. PHS

    Read the article

  • Scripting around the lack of user:password@domain url functionality in jscript/IE

    - by Idiomatic
    I currently have a jscript that runs a php script on a server for me, dead simple. But... I want to be atleast somewhat secure so I setup a login. Now if I use the regular user:password@domain system it won't work (IE decided it was a security issue). And if I let IE just remember the password then it pops up a security message confirming my login every time (which kills the point of the button). So I need a way to make the security message go away. I could lower security settings, which tbh I am fine with but nothing seems to make it fuck off (there might be some registry setting to change). Find a fix for jscript that will let me use a password in the url. There used to be a regedit that worked for older systems which allowed IE to use url passwords (not working on my 64bit windows7 setup) though I doubt that'd have helped jscript anyways (since it outright crashes). Use an app other than IE. Inwhich case I'm not sure how to go about it, I want it to be responsive and invisible so IE was a good choice. It is near instant. Use XMLHttpRequest instead of IE directly? May even be faster but I've no idea if it'd help or just have the same error. Use a completely different approach. Maybe some app that can script website browsing. var args = {}; var objIEA = new ActiveXObject("InternetExplorer.Application"); if( WScript.Arguments.Item(0) == "pause" ){ objIEA.navigate("http://domain/index.html?pause"); } if( WScript.Arguments.Item(0) == "next" ){ objIEA.navigate("http://domain/index.html?next"); } objIEA.visible = false; while(objIEA.readyState != 4) {} objIEA.quit();

    Read the article

  • Computer will not boot - disk read error - cannot boot from HD or DVD

    - by Grant Palin
    This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

    Read the article

  • Issues connecting to HP ProCurve switches

    - by BriGuy
    We are having a very strange issue trying to connect to our infrastructure switches via SSH. When you first try connecting to them, the switches will prompt for the password - and then just sit there after it is entered. If you create a second SSH session to the switch (while letting the first one remain open and just sitting there) it will let you log right in. The switches are doing the same thing with RADIUS and local authentication. The other strange part to all of this, is that about 10 switches started doing it all at the same time. As far as actual configuration of the switches, nothing has changed. Occasionally, one switch will start working like normal, but then stop again. These are all HP ProCurve managed switches, but all different models/firmware. Some switches that are not working are using the same firmware as others that are working. UPDATE: 20130312 I am also seeing this same behavior when trying to use telnet. The first telnet session just hangs there, and the second telnet session will let me log in. Rebooting the switches seems to get them working, but I still have 5 production switches that cannot easily be rebooted because of their production roles. Is anyone aware of anything else that can be switched on/off that may reset the logon for remote management or something like that?

    Read the article

  • Is it possible to get ESC to behave as an actual escape key?

    - by leftaroundabout
    So I have finally switched, not so much because I'm yet convinced Emacs in itself is the better editor but because it certainly does have more powerful extensions. I am still using vim-mode though, perhaps that's part of my problem... but I really don't intend to abandon the modes-approach, so I'll probably stay with it. I'm getting along quite well, but one thing I find really unnerving is the behaviour of the esc key (which I have in the shift-lock position). I'm used to relying on this a lot as more or less a "panic key", which may not be nice but I find allows me to work generally quite a bit less caring about the keystrokes themselves, and thus faster. What I'd like this key to do is just get me out of any minibuffer or special editing mode into a well-defined normal state. Perhaps most importantly, I would like it to not do anything unrelated, Simulate meta. What do I have an alt key for? Close windows I'm not even in at the time. Getting interpreted as the final key in some key sequence. ... Is it possible to turn all that off and make esc an actual escape key? Vim-mode does make it behave kind of as I like in some situations, but when other plugins are involves this often breaks. Alternatively, are there different options that might suit my kind of workflow?

    Read the article

  • Proxmox: VMs and different public IPs

    - by Raj
    I have a server which has two NICs and both are directly connected to internet. I have five different public IP addresses available for the VMs. The host machine (Proxmox) doesn't need to use any (it'll use a private IP and that's all) but will have internet connection. I've gone through the Proxmox documentation and I'm not able to understand the big picture to set up the right network configuration for my needs. In short, what I have is: One server (Proxmox, host machine) On that server, 5 VMs are created 5 public IP addresses available (one for each VM), let's say: 80.123.21.1, 80.123.21.2, 80.123.21.3, 80.123.21.4, 80.123.21.5 What I have now for the host is the following: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.101 netmask 255.255.255.0 bridge_ports eth0 bridge_stp off bridge_fd 0 auto vmbr1 iface vmbr1 inet manual It can be reached from the internal network, so that's OK. It has internet connection, which is also OK. vmbr1 is going to be used by the VMs. Each VM will have its own IP on his network interfaces configuration file. For some reason, VMs will not have internet and they won't be able to have public IP address. If I use NAT, it will work correctly, but they will not use the public allocated IP addresses for them. Am I missing something?

    Read the article

  • what are these weird IP address connections in resource monitor?

    - by bill
    I decided to check out Resource Monitor (on the 'Performance' tab in Task Manager, Windows 7) and I noticed in the "Network" section that the 'System' image name kept making a bunch (~5 at a time) of connections to random IP addresses, it would show anywhere from 1-500 bytes/sec 'sent'. They would stay connected for 1-2 minutes. -All web browsers are closed So, first thing I did was run a trace from network-tools.com on some of these IP addresses. 8/10 were outside of US and did not resolve to any host name. Of the 10 IP addresses I traced, 2 were in US, 4 showed origins in China, and one each to Algeria, Russia, Pakistan, Korea. (!) So, the next thing I did was turn off my wireless card, watch the connections disappear, then turn the card back on, and within 30 seconds more random connections were created by System, with different IP addresses from the first time. The next thing I did was go open Task Manager, Show Processes From All Users, then I killed just about everything that wasn't (what appeared to be) a windows process. Turned on wi-fi, and again within 30 seconds, random IP addresses connect for ~ 1 min at a time, new ones coming and going. I occasionally use bit torrent on this machine, but there was definitely no process that seemed related to bt running after I went through task manager, and bt wasn't open to begin with. So, any ideas on what these connections might be for? I have been using Ad-Aware Free and AVG Free on this computer for a while now, always up to date..

    Read the article

  • One Way Sync with Dropbox?

    - by user244805
    Is there any way I can mirror a dropbox folder to my C drive by just running a portable file? Extra background information because I know you guys hate it when you don't get the entire situation: I go back to University in fall and I need a new storage solution. I decided to use DropBox to sync my tiny University files (< 5 MB). I need to access these files from 4 machines: Windows 7 Home machine Windows 7 University A machine Windows 7 University B machine Android tablet 1 and 4 are a non-issue. The problem lies with 2 and 3. I want to be able to edit my files on 2 and 3 but those machines are not mine. There is an easy fix. Run a portable version of the DropBox syncer on a USB drive. But the problem is that I don't want to carry a USB drive around with me all the time. In that case, I can just run the small portable DropBox syncer off the internet. But where will it to store the files? A temporary directory on the C drive. There is only one issue left: there are hundreds of machines that I will randomly use that fit in categories 2 and 3. My portable DropBox syncer will notice that the temporary directory is empty on each new PC I use and instead of downloading my DropBox folder to the machine, it syncs the other way around i.e. it deletes my entire DropBox. The solution is to mirror my DropBox onto the temporary directory before running the DropBox syncer.

    Read the article

  • Server 2008 R2 boot is at 2 hours and counting. What now?

    - by Jesse
    This morning, we rebooted our Server 2008 R2 box. No problem, came right back up. Then we shut it down and let it install windows updates. While it was off, we added some RAM. Then we turned it back on. The system came right back up to the "press ctrl-alt-delete" screen, so far, so good. I logged in. The system got as far as "Applying Group Policy" -- then spent almost an hour applying drive mappings. Finally finished that, and has now spent 30 minutes on waiting for the Event Notification Service. I still haven't been able to log in. Remote desktop service doesn't appear to be running yet. I tried viewing the event log from another machine. I see that the box is writing to the Security log, but there are no events in System or Application in the last 45 minutes. Digging through the System log of events from 45 minutes ago, I see a bunch of timeouts: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service. [lots of these] A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service. What can I do? Should I try shutting it down remotely, or will that do more damage?

    Read the article

< Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >