Search Results

Search found 16499 results on 660 pages for 'off rhoden'.

Page 504/660 | < Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >

  • Why is my HP TouchSmart tx2 1025dx shutting down?

    - by Kristy
    I'm having an issue with my HP tx2 1025dx laptop. Sometimes it will spontaneously shut itself off. First, the screen will go out. Next, the computer itself will shut down. This usually occurs when I am doing something that requires a lot of resources, but lately can happen when I am doing something as simple as using an Office app. I think it may be heat related, if I try to boot the laptop after it shuts itself down, it will shut itself down again before startup is complete. If I let it cool down for a while and then come back to it, the computer will boot properly. These shutdowns are always accompanied by high temperatures on the bottom right side, as well as the right side of the keyboard. I am using a laptop cooler with two fans, and it is not making a bit of difference. This is the second TouchSmart we have owned, the first one had the same issues, we sent it in to HP after it finally refused to reboot. They “fixed” it, and it worked fine for about a month before doing the exact same thing. Unfortunately we had bought the second one before the issues began with the original, if I had known this would be a problem, I would not have purchased another TouchSmart. This particular laptop we have had for more than a year and it didn’t start these issues until a couple of months ago. Any suggestions as to how to fix this problem?

    Read the article

  • Automatic switching of network card when vm is moved

    - by spock
    I have two hosts in a pool and I used to be able to move the vm around and they will start without any problem. But after I played around with some network setting, which I don't remember what, I started getting "This VM needs storage that cannot be seen from that server" message. As you can tell I am a beginner with Xenserver. Here is the very simple environment: 2 host servers with their own local hard disk and network card. One is a Pool master. Problem: Power off a vm and move vm from one server to another, or clone one vm to the other server. It used to be able to start up right away. Now, I need to delete one of the network that does not belong to the server, then it will start. Otherwise, the above error msg popup. The two networks (one for each network card in each host) are in the Networking tab of the vm, as well as in the host's networking tab. I googled but all I got to empty the DVD drive, which is not the problem here. Thanks in advance!

    Read the article

  • Disk (EXT4) suddenly empty without any sign of why

    - by Ohnomydisk
    I have a Ubuntu 10.04 server with several disks in it. The disks are setup with a union filesystem, which presents them all as one logical /home. A few days ago, one of the disks appears to have suddenly 'become empty', for lack of better explanation. The amount of data on the /home mount almost halved within minutes - the disk appears to have had just over 400 GB of data prior to 'becoming empty'. I have absolutely no idea what happened. I was not using the server at the other time, but there are half a dozen other users who may have been (without root access and without the ability to hose a whole disk). I've ran SMART tests on the disk and it comes back clean. The filesystem checks fine (it has 12 GB used now, as some user software continued downloading after the incident). All I know is that around around midnight on October 19, the disk usage changed dramatically: The data points are every 15 minutes, and the full loss occured between captures: 2012-10-18 23:58:03.399647 - has 953.97/2059.07 GB [46.33 percent] 2012-10-19 00:13:15.909010 - has 515.18/2059.07 GB [25.02 percent] Other than that, I have not much to go off :-( I know that: There's nothing interesting in log files at that time Nobody appeared to be logged in via SSH at the time it occured (most users do not even use SSH) The server was online through whatever occured (3 months uptime) None of the other disks were affected and everything else on the server looks completely normal I have tried using "extundelete" on the disk and it didn't really find anything (some temporary files, but they looked new anyway) I am completely at a loss to what could have caused this. I was initially thinking maybe root escalation exploit, but even if someone did maliciously "rm" the disk contents, it would take more than 15 minutes for 400 GB?

    Read the article

  • Profile not loaded correctly (Cannot access registry)

    - by xaav
    Every so often, I log on and get the Following Message: User profile was not loaded correctly. You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator This almost always happens when somebody else has been on the computer for a while, and then I log on. This never used to happen, but now it happens pretty often. My profile is not permanently corrupted, all I have to do is restart my computer, but this annoys me, and I would like to fix it. I was curios about the reason of this cause, so I looked into the Event Log, and found the root of the problem was the ntuser.dat file in the profile that I was logging on to was locked at logon time. This resulted in the current users registry not being loaded, resulting in failure to load the profile. I just found a microsoft article that mentions this exact issue: http://support.microsoft.com/kb/960464/ The problem is that I do not want to delete this profile; and this issue does not come up every time that I log on, only when somebody else has been on a long time before me. What could be locking this file? Is there any way to get a process list without logging on so that I can identify which process has the file locked? Any other suggestions?

    Read the article

  • computer randomly restarting. both in game and out of game

    - by eric
    first my specs are. AMD Phenom II x4 955 processor 3.2ghz 20gb ddr3 ram 4Gb Nvidia Geforce GTX 770 850w Corsair tx850w psu Gigabyte ud3 mobo Windows 7 professional I recently uprgraded my vid card to gtx770 and upgraded my psu to the 850w thats in it now. i did a reformat with the installation of the new gpu and psu and started fresh and only have a couple programs installed (diablo3, nvidia control panel, wow, and steam). all drivers are up to date and everything is hooked up correctly. the problem is it will randomly shut down. no blue screen. just turns itself straight off and reboots after a couple seconds. occasionally i will have to unplug the power cable from the psu for a few minutes then reconnect and it will start up. it seems pretty random. sometimes it does it when my pc is just sitting there on the home screen. and sometimes it does it during games. and sometimes it doesnt do it for days at a time. i noticed the psu felt hot so i put an extra fan blowing straight onto both the psu and gpu and neither feel overly hot after it shuts down now. could it just be that it is a psu problem. the psu was taken from another machine but wasnt having this problem in that machine. i have seen a few articles online about gtx770 doing the same thing. but i havent found any answers or solutions. any help will be appreciated. im sure the 850w is enough to power my machine, im just stumped and ran out of ideas to fix it. i have even returned the video card for another thinking it might have been an issue with that particular card, but still gettin the same problem.

    Read the article

  • Windows 7 delayed file delete

    - by GregoryM
    I'm stuck with a pretty rare problem that happens on Windows 7 OS only. Every time I'm deleting the file with *.exe extension through explorer, the file doesn't get deleted immediately. I'm forced to wait for around one-two minutes before the system will delete the file. The main problem is that I cannot develop in such situation, because every time I build my solution, the old executable gets 'deleted', but is still there. So the new one cannot be created by Visual Studio. This problem breaks the Steam update progress and a few other installers functionality too. Fresh installed Win7 doesn't have this kind of trouble, so I guess this must be some bad registry entries or some services. Browsing the internet for solutions I found only this: http://www.sevenforums.com/software/72091-several-minute-delay-when-deleting-any-exe-file.html. But the solution the author found is not working (change the userName :)). Is there any ideas how to find what causes this to happen? BTW: when I place the file into Trash bin, no delay occurs. When I delete file with Total Commander - no delay too. Tech details: Windows 7 x64 Ultimate. UPD: maybe some shadow copying or system restore services (though I have the system restore turned off) block the files? Can't even guess...

    Read the article

  • Vim: How to join multiples lines based on a pattern?

    - by ryz
    I want to join multiple lines in a file based on a pattern that both lines share. This is my example: {101}{}{Apples} {102}{}{Eggs} {103}{}{Beans} {104}... ... {1101}{}{This is a fruit.} {1102}{}{These things are oval.} {1103}{}{You have to roast them.} {1104}... ... I want to join the lines {101}{}{Apples} and {1101}{}{This is a fruit.} to one line {101}{}{Apples}{1101}{}{This is a fruit.} for further processing. Same goes for the other lines. As you can see, both lines share the number 101, but I have no idea how to pull this off. Any Ideas? /EDIT: I found a "workaround": First, delete all preceding "{1" characters from group two in VISUAL BLOCK mode with C-V (or similar shortcut), then sort all lines by number with :%sort n, then join every second line with :let @q = "Jj" followed by 500@q. This works, but leaves me with {101}{}{Apples} 101}{}{This is a fruit.}. I would then need to add the missing characters "{1" in each line, not quite what I want. Any help appreciated.

    Read the article

  • Need some help figuring out BB4Win or any of its varieties: does it replace windows explorer?

    - by StormRyder
    I don't really care too much about replacing original Windows the desktop, taskbar and system tray. I really dislike the new Win7/Vista Windows Explorer: Screenshot here (just to make sure there's no confusion) So, what I'm trying to figure out is whether BB4Win or its plugins have a replacement for it. The bb4win website pretty much doesn't make sense to me. I'm using Win7 64 bit. Also, off-topic ... I was looking at a related question on this site here: Good Windows shell replacement Why can't I add comments? I wanted to ask the same question I'm asking now as a comment under the answer given by Molly7244, the person who answered with suggesting BB4Win. But there seems to be no way to add new comments anywhere! Why? Am I missing something? I don't quite understand the weird way this site is set up... I'm used to the more typical forum format. Sorry. Thanks for any help!

    Read the article

  • Server down at 23:26 every night

    - by miccet
    We are having a big problem with our sites stability the last couple of weeks and after endless hours of troubleshooting I don't get anywhere. So I turn to you dear community. Setup: 2 x VPS servers - Front end, 8 core, 8G RAM. - Database, 5 core, 3G RAM. Both running Ubuntu. Ruby on Rails EE with Passenger 3 and Rails 2.3.11. MySQL 5.1.67. The problem is that each night, at the exact same time (23:26) the SQL server suddenly shows a processlist full of COMMIT with an increasing Time. After 30-40 seconds (can go longer) a wave seems processed and the site responds for a few seconds before it repeats. During this hick up the database server load spikes while the front end is relaxing. I have looked at slow queries, but is not finding any locks or other unusual queries ran at this time. I have looked at iotop at the time of the halt and there is no activity from mysql. I also tried turning off query_cache and messed around with the mysql configuration file without much change. Any ideas?

    Read the article

  • Windows 7 "freezes" (chills?), and then "unfreezes" for about 1 minute.

    - by gbc001
    Hi, I have an Acer Timeline 1810T netbook (4GB RAM) with Windows 7 x64. About once or twice a day, it "freezes" - the reason i put this in quotation marks is that it does not really freeze, as in you cant move mouse, etc. I can move my mouse and jump between different applications, but I cant use the applications for anything. So I can jump between notepad and Firefox, but I cant browse to a new web page. I have been trying to determine the source of this misery for a while now, and I suspect it has something to do with the hard drive - indirectly if not directly. Here are some screen shots of the resource monitor during a "freeze" and during normal operation: Freeze: http://imgur.com/Gcgq1.jpg Normal operation: imgur.com/mlHaI.jpg As you can see, CPU is fine during freeze, but the disk is going bananas.. Does anyone have an idea of what these reading mean, or about the problem in general? There seems to be no specific activity that sets this off - it can be during browsing, or during media playback with nothing else open. Very appreciative of any help!

    Read the article

  • Is it possible to ack nagios alerts from the terminal on a remote workstation?

    - by cat pants
    I have nagios alerts set up to come through jabber with an http link to ack. Is is possible there is a script I can run from a terminal on a remote workstation that takes the hostname as a parameter and acks the alert? ./ack hostname The benefit, while seemingly mundane, is threefold. First, take http load off nagios. Secondly, nagios http pages can take up to 10-20 seconds to load, so I want to save time there. Thirdly, avoiding slower use of mouse + web interface + firefox/other annoyingly slow browser. Ideally, I would like a script bound to a keyboard shortcut that simply acks the most recent alert. Finally, I want to take the inputs from a joystick, buttons and whatnot, and connect one to a big red button bound to the script so I can just ack the most recent nagios alert by hitting the button lol. (It would be rad too if the button had a screen on the enclosure that showed the text of the alert getting acked lol) Make fun of me all you want, but this is actually something that would be useful to me. If I can save five seconds per alert, and I get 200 alerts per day I need to ack, that's saving me 15 minutes a day. And isn't the whole point of the sysadmin to automate what can be automated? Thanks!

    Read the article

  • One Apache server, multiple clients - best practices for config files?

    - by OttaSean
    First time user; please be gentle. :-) (And if you don't like my question I'd be grateful for a comment as to why...) I am doing a contract at a government server shop that provides web services for multiple client groups in other areas of the government. My employer has asked me to look into how other shops, in similar situations, handle configuration files, and whether there are any best practices on the subject. I'm pretty sure there are lots of installations out there running multiple VirtualHosts out of one Apache installation, but surprisingly I couldn't find anything online about how people handle config file layout, so was hoping some of you wise folks on ServerFault might have some thoughts or pointers for me. The current setup - which seems logical to me - is that each client site has its own directory off the root - so: /client/tps-reports/ /client/silly-walks/ /client/ministry-of-magic/ and so on - and each of those directories has a /htdocs, /cgi-bin, and /conf (among others). The main /etc/apache/httpd.conf only contains Include statements (and lots of comments), the last of which is: Include /etc/apache/vhosts/*.conf The vhosts directory contains symlinks: tpsrept.conf - /client/tps-reports/conf/tpsrept.conf sillywk.conf - /client/silly-walks/conf/sillywk.conf mom.conf - /client/ministry-of-magic/mom.conf Each of those .conf files contains the actual NameVirtualHost definition and a gigantic <VirtualHost 192.168.12.34> stanza - which contains all the stuff about the specific site. The idea is that clients have access to what's in their own /client/xx directory, so they can change stuff in the section of the config that is relevant to them. As I mentioned above, that seems fairly logical to me, but I'm wondering if any of you wise folks are aware of potential gotchas with this sort of layout, or any other thoughts on why it is or isn't a good idea. In particular, how do other places do it? Is there a "best practice" for this sort of thing? Many thanks in advance for your time and any thoughts you all might have.

    Read the article

  • How to route 1 VPN through another on OS X?

    - by Eeep
    Hi everyone. Thanks a lot for your help! I've been tinkering with this for a while and have read many posts along with Googling for help, but my knowledge of TCP/IP is really weak... I have access to two different VPN servers. 1 Is set up in Network Settings and connects through PPP 2 Is set up through Tunnelblick and uses OpenVPN. I can connect to either tunnel #1 or tunnel #2, but not both one after the other... One of my major to-do's this year is study TCP/IP, but for now, would you be super-helpful and help me fix this really clearly? I have no experience with routing, DNS, gateways or any of that. If you tell me, "Set your gateway to XXX.XXX.XX.XXX" can you specify how I get that IP, off of what interface so I don't get messed up? I can figure out the terminal just fine if you let me know what to type, and I WILL read the man pages on everything you help me with. Thanks a million!

    Read the article

  • Some Power Supply Cable Questions?

    - by jasondavis
    I am building a new PC and I haven't done this in a few years. It will have all the latest tech stuff. I got my PSU in the mail and I am looking over the cables (it has a lot) I thought it was a mudular PSU so I could only use the cables I need but instead it is a hybrid (some wires attached and some can be added/removed instead of all of then being removable). 1) So I am curious, I believe all my hard drives and optical drives are powered off of a sata power cable so does that mean I probably do not need any of the 4 pin molex cables? Or are these used for other things? 2) I know the 24-pin cable goes to my motherboard. 3) I have some 6-pin cables that are labeled pci-e which is new to me. I read these are for some grapghic cards and stuff. I have 2 grapghic cards but they do not require a seperate pci-e power wire be hooked to them. So are these pci-e wires just to power pci-express cards? Or for other things as well? 4) I have a 4pin ATX 12v wire, what is this for? 5) 8 pin EPS, what is this for?

    Read the article

  • Integrating external computer into a domain - some recommendations please

    - by TomTom
    Given: * A multi loation company. Every office has local routers that connect to a central VPN capable rouer in a data center. All fine so far. We now need to move a computer off site into a hosting center across the globe, to get it closer to some supplier computers we work for. it will run limited logic but latency is important, and our latency so far is too large. This computer will be in a data center and does no require incoming connections except for adminsitrative purposes, although it needs outgoing connetions. I have no real chance to put one of my VPN routers there, sadly - otherwise I would have no problem. Usage of RRAs is not recommended (we had various probblems there over time). I could deal with it. The computer MUSt integrate into the corporate structure via VPN and join the domain and be fully "tracked" (controlled for performance). What is the best suggestion? So far it looks like my best bets woudl be to log in via RRAS and deal with whatever issues arise there plus uise the local firewall the limit incoming connections to this computer to what is needed (which runs down to an emergency RDP connection allowance). Anyone a better idea?

    Read the article

  • Help with Backup Scheme for B.E 12.5

    - by Jemartin
    I'm in process of implementing a new backup scheme. I would say that I'm kind of new to it. So here my question. I'm currently using Backup Exec 12.5 on Windows Server 2008 w/Hyper-V, and IBM Adic Scalar 24. I currently backup our mail server, SQL DB, Board Server Linux Red Hat, Ftp, etc. To a Near-line which is local on our SAN I have the daily's go there as well as full. I would like to start weekly full to tape on a Saturday it takes about 2-3 days to complete the entire full to tape due to backing up from our Co-Lo as well. I have read up on the Father/son rotation but here's my issue with that I dont use tapes everyday only on the weekly full to tape will I be using them. So if there is 4 weeks in a month would I rotate in this order ( Month June WK1 =7tapes , June WK2=7 tapes, June WK3=7tapes June Wk4=7tapes with WK4 being the last tape for the month of June I would use that as a Month tape. For the month of July Wk1= June's WK1 tapes, July WK2= June's WK2 tapes July WK4 = Junes Wk4 tape for a month or would I use a set of new tapes for the last week in July. All tapes are being taking off site as well.

    Read the article

  • Cannot browse Visual SVN Repositories

    - by user1783560
    I went through Unable to browse repository after setting visual SVN Server and tried to implement the answer suggested but even the IP address is not solving my problem. I have 1) Turned off firewall 2) Set the directory C:\Program Files (x86)\VisualSVN Server security rights to "full control" for all groups including "Network service" group. 3) Set the directory D:\Repositories security rights to "full control" for most groups including "Network service" group. 4) Tried switching between secure and non-secure connection option in visual svn server manager. 5) Tried different with port numbers. Including 443 (with https) and 80 (http). Also tried giving random ports with/without https. Using computer name/ IP address in the url doesn't help. Windows network diagnostics - Troubleshooting report has following message for me. Security policy settings or firewall settings on this computer might be blocking the connection. = Detected Can someone guide me please? I have spent more than two weeks on this now without any solution. Thanks in advance! I appreciate your responses.

    Read the article

  • Duplicate monitor on highest resolution in Windows 7

    - by AlexanderMP
    I have a monitor with a native resolution of 2560x1440, connected through display port. I also have an AV Receiver connected to the video card via HDMI, to have surround sound in games. All using Radeon HD 5670 (will upgrade soon to HD 7850). The problem is that my computer detects the receiver as a separate monitor, with the highest available resolution of 1920x1080. I have 3 options: Disconnect the second display. But then the sound (digital audio output through video card) also disappears. Duplicate displays. But then my primary monitor resolution is reduced to a maximum of just 1920x1080, that being the maximum of the second monitor. Extend desktop. This is the solution I picked so far, it being the least evil. The problems I face in this situations are 2: I have a blank part of the desktop where I sometimes lose my mouse pointer, so I made the extension small, 640x480, and placed it in a corner; when I turn off the main display, all windows resize to 640x480. In Kubuntu I had the option to duplicate the displays, while keeping the higher resolution. Which was great. I tried overriding using the Win7 netbook hack, but it's not available on non-netbooks. Is there a similar solution for this problem in Windows 7?

    Read the article

  • how to remove location block from $uri in nginx configuration?

    - by Jason
    I have a rewrite in my ngix conf file that works properly except it seems to include the location block as part of the $uri variable. I only want the path after the location block. My current config code is: location /cargo { try_files $uri $uri/ /cargo/index.php?_REWRITE_COMMAND=$uri&args; } Using an example url of http://localhost/cargo/testpage the redirect works, however the value of the "_REWRITE_COMMAND" parameter received by my php file is "/cargo/testpage". I need to strip off the location block and just have "testpage" as the $uri I am pretty sure there is a regex syntax to split the $uri and assign it to a new variable using $1 $2 etc, but I can't find any example to do just a variable assignment using a regex that is not part of a rewrite statement. I've been looking and trying for hours and I just can't seem to get past this last step. I also know I could just strip this out on the application code, but the reason I want to try to fix it in the nginx conf is for compatibility reasons as it also runs on Apache. I also should say that I have figured out a really hacky way to do it, but it involves an "if" statement to check for file existance and the documentation specifically says not to do it that way. -- UPDATE: ANSWERED BY theuni: The regex goes in the location block definition. one note of caution is that php handler location needs to be ABOVE this location, otherwise you will get a server error because it goes into an infinite redirect loop location ~ ^/cargo/(.*) { try_files $1 /cargo/$1/ /cargo/index.php?_REWRITE_COMMAND=$1&args; }

    Read the article

  • Cause of laptop only booting once every 3-10 times

    - by user16441
    My 3-year old Asus EEE laptop has been working flawlessly in the past, but in the last week it has started behaving oddly. When I boot, one of the following happens: Screen remains totally black. Absolutely nothing comes up. I need to retry booting. (Happens 70% of the time). Laptop starts regular boot. However, somewhere during the boot process it goes black and I need to retry (20% of the time). Screen turning black is more likely when I move the laptop around during boot. Laptop boots properly. Once booted, all is fine. But I'm afraid to turn it off and have been keeping the laptop running till the night. Additional details: All normal lights light up when I boot; whichever of the scenarios goes down. There are no odd sounds or beeps, whichever of the scenarios goes down. I thought it might be the SSD drive that is dying, but it does not use SMART and it appears difficult to troubleshoot. I tried booting with and without the battery, but the scenarios are identical. Before completely investigating the hard drive, I'd like to hear opinions regarding the cause of this problem. Is this most likely the hard drive, or could there be another cause for these symptoms? Using Arch Linux.

    Read the article

  • No "New Folder" button in windows 7

    - by user1125620
    My sibling's laptop is running windows 7 x64. The torrents folder in Documents doesn't show the New Folder button. ctrl+shift+n doesn't work either. I tried EVERYTHING here: Can't create new folder from anywhere in Windows 7 ..but nothing worked. As with the OP there, running the .reg file brings an error that says something about not being able to change the registry value while something is using it. I removed one entry at a time in the .reg file until I narrowed down the ones that were causing the problem, which were in HKEY_CLASSES_ROOT/CLSID. The only different reg value, however, was in HKEY_CLASSES_ROOT\CLSID{11dbb47c-a525-400b-9e80-a54615a090c0}\InProcServer32, for which the default value was %SystemRoot%\system32\explorerframe.dll and the value trying to be set ExplorerFrame.dll. I'm on windows 7 32bit and that's the same value I have for the entry, so I doubt that's it. The only thing I think is slightly off is that there is a user group with a strange name that only has execute and read access, and I can't grant it full control. Every time I try, it acts as if it works, but doesn't change it. I tried booting into safe mode and changing it, but it did the same thing. It is the folder where utorrent puts any new downloads, so it's possible utorrent did something, though that's never happened to me before. edit: I had renamed the folder to something else to avoid the problem, and then went onto my own computer to try to figure out what was wrong (I personally don't like using the touchpad on laptops). While searching, my sibling starting watching a movie. I minimized the movie and saw that the same thing had happened to the folder I renamed. Also changed was the file layout. It showed the different days and the files modified on those days. So, I was able to fix it by doing: Clicking Organize Layout Menu Bar On the menu bar clicking View Arrange By Folder

    Read the article

  • I'm having trouble getting my server to appear online.

    - by JMRboosties
    Total newb question I'm sure. First I had installed WAMP (http://www.wampserver.com), and I was able to access my pages from other computers in my router network, and the virtual device used to debug Android programs (the purpose of my having a server). This functionality failed, however, at some point over these past few days. While my own browser displays the pages just fine, other computers, my Android phone (on our room's wifi), and my virtual device are no longer able to connect to my pages. I had not made any changes in the settings. I uninstalled WAMP and installed EasyPHP. However, the problem was not resolved. I know this is rather vague, but does anyone here have an idea of what may have happened? I forwarded both port 80 (I know its the default HTTP port, I did it just to be safe), and now port 8888 which EasyPHP uses. I turned my firewall on my hosting computer off for good measure. I cannot access my pages from neither remote computers or computers using my router. Any ideas you may have on how to resolve this would be awesome, thanks a lot. And if you need anymore info please tell me.

    Read the article

  • Finding Font Issues in Acrobat

    - by Jayme
    Ok let me try this again, so sorry for not be clear. We create our PDFs through Quark, then send to print. I usually create outlines on my EPS files before I load in Quark but forgot this time. We bypassed the font error that Quark gave us by accident and found out our PDF was bad too late and it cost a lot of money to fix. We are trying to find a way to check our PDF for font problems before we send it to print, in case this problem happens again. We just want to be extra sure that we have tried everything. What I see in Quark is what the font is supposed to look like. When I view my PDF, the text is mixed up. Its readable but doesn't look like its supposed to and the spacing is all off within the text. My boss told me about the preflight in Quark and the Internal Structure for the fonts. She was asking me if this would help and what the lingo all meant. (which is where my first question started) The image on the left is my EPS that is correct, the image on the right is from the PDF. The white text in the top right and the website at the bottom left is what is messed up. I am running Mac 10.5.8, Quark 7.5 and Acrobat 8.3.1. Thanks, Jayme

    Read the article

  • Copy past speed very slow for a large number of files on Windows [closed]

    - by Arno2501
    I've run the following test I've created a folder containing 15'000 files of 400 bytes using this batch : @ECHO off SET times=15000 FOR /L %%i IN (1,1,%times%) DO ( fsutil file createnew filename%%i.txt 400 ) then I copy past it on my Windows Computer using this command : robocopy LargeNumberOfFiles\ LargeNumberOfFiles2\ After it has completed I can see that the transfer rate was 915810 Bytes/sec this is less than 1 MB/s. It took me several seconds to copy 7 MBytes Please note that this is very slow. I've tried the same with a folder with a single file of 50 Mbytes and the transfer rate is 1219512195 Bytes/sec. (yeah GB/s) instantaneous. Why copying large number of files take so much time - ressources on a windows filesystem ? Please note that I've tried to do the same on a linux system which runs on the same computer in a virtual machine (vmware player) with ext3 filesystem. I use the cp command and the copy is instantaneous ! Please also note the following : no antivirus I've tested that behaviour on multiple windows computers (always ntfs) i always get comparable results (transfer rate under 1MB/s avg 7-8 seconds to copy 7 MBytes) I've tested on multiple linux ext3 system the copy is always instantaneous for that amount (15000 files of 400 bytes) The question is about understanding what makes windows filesystem so slow to copy large number of files compared to a linux one for instance.

    Read the article

  • Word 2010 header "different first page" option does not work if you select the same built-in header preset?

    - by fredsbend
    I have a three page Word 2010 document. I have set a header on the first page and marked the "different first page" option to make the follow page headers different. It works as expected so long as I don't select the same built-in header preset for the following pages. Here's what I am doing: Check mark different first page. Make the header for the first page using Alphabet preset. Attempt to make the header for the following pages by starting with the same Alphabet preset. I only want to change the text of the following headers but still want the same graphical effects. Click off the header into the body of the document. Upon doing this the headers on the first page are updated to the ones I just made for the following pages. I don't I am doing something wrong because I can choose a different header preset and it will work as expected. If I select the same preset, however, it updates all headers, whether the "different on first page" is selected or not. If this is repeatable on others' computers the I would say it's a word bug. If not then please help me figure out how to get this working right.

    Read the article

< Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >