Search Results

Search found 55281 results on 2212 pages for 'get set'.

Page 498/2212 | < Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >

  • Use all 5.1 speakers with a 2.1 audio source

    - by thegreyspot
    Hi! I just bought a 5.1 surround sound speaker set for my computer in my bedroom. The rear speakers are next to me in bed while the front speakers are at the other end of the bed at my feet. While I enjoy the surround sound during movies that support 5.1 sound, I would like to have my rear speakers working when listening to podcasts, or other 2.1 channel sound. How can I do this? When I enable "Speaker Fill" in the Realtek Hd Audio manager the sound only comes out of the front and center speakers with a few background noises that come out the rear ones. But since my ears are closer to the rear speakers, I'd rather have the sound come out of them. Let me know of any ideas! Hmm seems like the only option is to set the rear speakers to "Front Speakers" and change it to stereo in the Realtek HD audio. But still that take alot of steps and it doesnt not use the center speaker Thanks

    Read the article

  • Best Processor for MediaSmart Server?

    - by Kent Boogaart
    I'm trying to figure out what the best possible processor is that I can stick in my HP MediaSmart server. I'm clueless when it comes to correlating CPUs to motherboards. I suspect it's the socket type I care about, but I worry that there's more to it. CPU-Z gives me (excerpt): Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 1) Number of threads 1 (max 1) Name AMD Sempron LE-1150 Codename Sparta Specification AMD Sempron(tm) Processor LE-1150 Package Socket AM2 (940) CPUID F.F.1 Extended CPUID F.7F Brand ID 1 Core Stepping DH-G1 Technology 65 nm Core Speed 1000.0 MHz Multiplier x FSB 5.0 x 200.0 MHz HT Link speed 800.0 MHz Stock frequency 2000 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size L2 cache 256 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 10.0x Max VID 1.350 V P-State FID 0x2 - VID 0x12 (5.0x - 1.100 V) P-State FID 0xA - VID 0x0C (9.0x - 1.250 V) P-State FID 0xC - VID 0x0A (10.0x - 1.300 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset ------------------------------------------------------------------------- Northbridge SiS 761GX rev. 02 Southbridge SiS 966 rev. 59 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR2 Memory Size 2048 MBytes Channels Single Memory Frequency 200.0 MHz (CPU/5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 5 RAS# Precharge (tRP) 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate (CR) 1T DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version R03 date 05/08/2008 DMI System Information manufacturer HP product MediaSmart Server version unknown serial CN68330DGH UUID A482007B-B0CC7593-DD11736A-407B7067 DMI Baseboard vendor Wistron model SJD4 revision A.0 serial unknown DMI System Enclosure manufacturer HP chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Sempron(tm) Processor LE-1150 clock speed 2000.0 MHz FSB speed 200.0 MHz multiplier 10.0x DMI Memory Controller correction 64-bit ECC Max module size 4096 MBytes DMI Memory Module designation A0 size 2048 MBytes (double bank) DMI Memory Module designation A1 DMI Memory Module designation A2 DMI Memory Module designation A3 DMI Port Connector designation PS/2 Mouse (internal) port type Mouse Port connector PS/2 connector PS/2 DMI Port Connector designation USB0 (external) port type USB DMI Physical Memory Array location Motherboard usage System Memory correction None max capacity 16384 MBytes max# of devices 4 DMI Memory Device designation A0 format DIMM type unknown total width 64 bits data width 64 bits size 2048 MBytes DMI Memory Device designation A1 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A2 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A3 format DIMM type unknown total width 64 bits data width 64 bits How do I figure out what options I have for an upgrade?

    Read the article

  • Vim's relativenumber setting and multiple buffers

    - by connrs
    I like the relative number setting. I'm refactoring code at the moment (translation: explodicating 5 year old terrible methods and replacing them with nice code) and I find it useful to have the setting active on files as I open them I frequently either open multiple buffers or use a client/server vim to contain all my open buffers/files and have noticed that the relative number only seems to apply to the first buffer (and not the remaining buffers when I have set rnu in my .vimrc file.) Is it expected behaviour for rnu to only initially apply to the first buffer until you manually set it?

    Read the article

  • How do I make vim's autoindent not drop trailing spaces?

    - by Joey Adams
    In some text editors (e.g. Kate, gedit), when auto indent is enabled, pressing return twice will leave a trailing whitespace (which I want): if (code) { .... ....| } While others cater to the coding standard where trailing spaces (even in blank lines) aren't allowed: if (code) { ....| } What annoys me about this is that if I arrow up after auto-indenting, the auto-indent is lost: if (code) { | .... } If I run vim and :set autoindent , I get the latter behavior. My question is, how do I set vim to keep the trailing spaces rather than automatically removing them if they go unused?

    Read the article

  • Virtualized CPU cores vs. threads

    - by nedm
    We've got a KVM host system on Ubuntu 9.10 with a newer Quad-core Xeon CPU with hyperthreading. As detailed on Intel's product page, the processor has 4 cores but 8 threads. /proc/cpuinfo and htop both list 8 processors, though each one states 4 cores in cpuinfo. KVM/QEMU also reports 8 VCPUs available to assign to guests. My question is when I'm allocating VCPUs to VM guests, should I allocate per-core or per-thread? Since KVM/QEMU reports the server has 8 VCPUs to allocate, should I go ahead and set a guest to use 4 CPUs where I previously would have set it to use 2 (assuming 4 total VCPUs available)? I'd like to get the most possible out of the host hardware without over-allocating.

    Read the article

  • Configuring HAProxy with memcache with failover

    - by Lawrie Matthews
    I'm configuring a new set of servers for an existing Wordpress site, and it's been requested that memcache be available and made more resilient. The idea proposed is to have HAProxy send requests to one of the two servers; if that memcache instance is inaccessible, then it should switch to the second, but should not switch back to the first if it comes back up unless the second is then unavailable. This doesn't appear to be a particularly common use case and I've not found much along these lines except to possibly set up the first node with an enormous rise value, such as: server server1 10.112.58.16:11211 check inter 5s fall 3 rise 99999999 server server2 10.112.58.19:11211 check backup which falls over as expected when server1 is unavailable. It won't ever fall back to server1, though, even if server2 goes offline. Can this be made to work?

    Read the article

  • Redmine: reposman.rb succeeds, but does not make SVN repos available to projects

    - by Joey Adams
    I'm testing reposman.rb on the command-line (before I make it a cron job): /usr/sbin/reposman.rb --svn-dir=/var/svn \ --redmine-host=http://example.com/projects --key='redacted' \ --owner='nobody' --group='nobody' It succeeded, printing messages for projects that didn't have repos yet: repository /var/svn/project1 created repository /var/svn/project2 created And printed nothing after running the same command again, indicating it remembered the repos. However, if I look at the Repository settings in Redmine for project1 and project2, they aren't set. Although the SVN repo is created, the Redmine projects aren't configured. How do I get reposman.rb to automatically configure Redmine projects to use the repos after they're set up?

    Read the article

  • rsync to windows (cygwin)

    - by abergmeier
    We have a windows file storage (don't ask) and now I want to rsync with the machine from Windows, Mac and Linux. So I installed freeSSHd (login shell is set to C:/cygwin64/bin/sh.exe), set up certificates and testing from Linux the test.dat has 0 bytes: ssh myuser@winmachinename "C:/cygwin64/bin/true.exe" > test.dat Even double checking with actual output works fine: ssh myuser@winmachinename "C:/cygwin64/bin/ls.exe" > test.dat Now, when I call rsync: rsync --progress -avz -e ssh myuser@winmachinename:/c/Users ~/test it fails with: protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(174) [Receiver=3.1.0] As far as reading the docs, this should not happen, when the first test is successful!? I am by now out of ideas - any recommendations how to debug this? EDIT: | OS | rsync version | |:--------------|:------------------------------------------| | Windows | rsync version 3.0.9 protocol version 30 | | Linux | rsync version 3.1.0 protocol version 31 |

    Read the article

  • Can someone recommend a Compact Flash card to be used as a boot disk/fixed disk.

    - by Hamish Downer
    I have an early Acer Aspire One netbook, and the flash drive is really slow at writing. I've taken it apart to add more RAM, but I've pretty much stopped using it. I've read about people replacing the SSD with a Compact Flash card and a CF to ZIF adapter but I've also read about some Compact Flash cards where the manufacturer has permanently disabled the boot flag to stop people doing this kind of mod. (Can't find the link any more though). (Although I have just found some info about CF cards that says "Most CompactFlash cards by default identify themselves as removable media instead of fixed disk" and that this is an issue for Windows. So my most specific question is: can someone recommend a compact flash card that does allow the boot flag to be set and to be set as Fixed Disk? Please say whether you've done it yourself, or just heard about it from someone else. Beyond that, is this generally a problem?

    Read the article

  • How to extract corrupted RAR files

    - by Anyname Donotcare
    I try to extract a file from set of .RAR parts. I always get the following error: Corrupted so I tried many programs to extract the corrupted RAR files. I have 10 parts, each one 400MB big. The last progam I used was Recovery toolbox for RAR. It gave me the following message: Severity:!High Message:Recovery error for file XXXX with message set file pointer error. The program extracted 2GB of data, but it should extract 4GB. Is there any way to extract the content or am I supposed to download the files again from another server?

    Read the article

  • Configuring Ubuntu for Global SOCKS5 proxy

    - by x50
    Does anyone know the best way to configure Ubuntu to use a SOCKS5 proxy for all network traffic? Server is ubuntu server - all cli. So I cannot set via the Proxy Settings GUI. We want to push all outbound traffic through the proxy (apt-get, http, https, etc). I do need to separate ssh traffic so it stays locally. Everything else should hit the proxy server. not that it matters, but I'm using Squid for the proxy server. I know this is easy on Mac and Windows as you can set a proxy on the actual network interface. Can you do the same on Ubuntu?

    Read the article

  • SASL + postfixadmin - SMTP authentication with hashed password

    - by mateo
    Hi all, I'm trying to set up the mail server. I have problem with my SMTP authentication using sasl. I'm using postfixadmin to create my mailboxes, the password is in some kind of md5, postfixadmin config.inc.php: $CONF['encrypt'] = 'md5crypt'; $CONF['authlib_default_flavor'] = 'md5raw'; the sasl is configured like that (/etc/postfix/sasl/smtpd.conf): pwcheck_method: auxprop auxprop_plugin: sql sql_engine: mysql mech_list: plain login cram-md5 digest-md5 sql_hostnames: 127.0.0.1 sql_user: postfix sql_passwd: **** sql_database: postfix sql_select: SELECT password FROM mailbox WHERE username = '%u@%r' log_level: 7 If I want to authenticate (let's say from Thunderbird) with my password, I can't. If I use hashed password from MySQL I can authenticate and send an email. So I think the problem is with hash algorithm. Do you know how to set up the SASL (or postfixadmin) to work fine together. I don't want to store my passwords in plain text...

    Read the article

  • define software path

    - by shantanuo
    I have an older version already installed. I have upraded the package using setup.py install command. But the path is not correctly set. When I type "s3cmd" is shows the older version of software. # s3cmd s3cmd [options] <command> [arg(s)] version 1.2.6 --help -h --verbose -v --dryrun -n # which s3cmd /usr/local/bin/s3cmd The correct version is in different folder and I will like that to be used whenever I type the command. # /usr/bin/s3cmd Consider using --configure parameter to create one. How do I set path? I have added path to .bash_profile file but it does not work. PATH=$PATH:/usr/bin/s3cmd

    Read the article

  • new monitor won't work on win3.1

    - by Rick Workover
    My old system monitor for my Windows 3.1 machine failed and the new flat screen has a sync error. The new monitors do not support the refresh/screen size it is set to. It boots up into Windows and the monitor is blank with a sync error. Without Windows 3.1 working I don't know how to change the refresh/size to get it to work. I haven't used Win3.1 in so long that I can't remember how to fix this. So, how do I reset the refresh rate and screen resolution it is set to, without being able to actually see anything?

    Read the article

  • Increase text size in Ubuntu 10.04 due to having large resolution/monitors

    - by Sridhar Ratnakumar
    I have 24" dual monitors with 1920x1080 resolution on both of them. Consequently the text appears so small. I use the following text-intensive applications frequently: Web browser (Google Chrome) IDE (Komodo) Terminal (Gnome Terminal) Email (Thunderbird) I can configure text size on IDE, Terminal and Email. But for Chrome, it is not a good idea to set proportional font size because often one wants to see the entire (not just proportional fonts) site to be zoomed. So I am asking: Is it possible to increase DPI in Ubuntu (much like on Windows) so as to increase the text size across all apps? OR Is it possible to set permanent 'zoom' in Google Chrome, using a third-party extension maybe? I am using Ubuntu 10.04 (Lucid Lynx)

    Read the article

  • Xen 4.0.1 on Ubuntu 10.10 not booting

    - by Disco
    I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

    Read the article

  • Making working passenger on working apache

    - by fl00r
    Hi! I've got Apache (-v): Server version: Apache/2.0.63 Server built: Nov 29 2009 15:23:34 Cpanel::Easy::Apache v3.2.0 rev4899 I want to start new Sinatra application on passenger. I've just installed passenger gem. So now I need to set up apache configuration. In httpd.conf there are many settings of others applications on server. So I just can't reinstall apache with passenger-install-apache2-module. I need to set up exist Apache with passenger. What have I do now?

    Read the article

  • Scriptable FTPS client able to send Keep Alive to control port?

    - by schultkl
    We need a FTP client that satisfies the following constraints: Windows Command-line scriptable, so we can automate it...sorry, FileZilla (?) FTPS, as it seems to perform better than SFTP The ability to send KeepAlive commands to the FTPS control port No passwords sent on the command line...sorry, curl Number 4, above, is critical: we have set KeepAlive in some other clients (e.g., CoreFTP LE) but we seem to have some routing equipment in the server environment which drops our connection when transferring a 7GB+ file. We have also set passive mode and "resume transfer" functionality seems currently broken with this secure file transport server...so we need to download the file in one go. What FTPS clients might meet our needs?

    Read the article

  • iptables to play nice with tor and ntpd

    - by directedition
    I'm setting up a server to operate as a tor relay and nothing else. I setup iptables to only allow talk on port 9001 and it worked fine, but there was an issue, the clock needs to be properly set and maintained for the relay to work properly, so I needed ntpd setup and running, but for some reason I can't get iptables to work as I want it. I'm trying to have it allow only tor and ntpd to talk over the network, but when I set it up to allow port 123 using udp, suddenly it ignores my -A OUTPUT ! -s 127.0.0.1 -j DROP and allows everything through. How should I go about this? Please excuse my ignorance, I've brand new to iptables.

    Read the article

  • Auto-responder rule in Outlook 2010 produces double signature (but only to certain emails)

    - by Austin ''Danger'' Powers
    I have set up an auto-responder in Outlook 2010 using a custom template, as a staff member will be on vacation for 6 weeks. It works perfectly, apart from the fact certain people receive two signatures at the bottom of the message instead of one. When reviewing the "sent" folder, there is no sign of double signatures. In the custom template, there is only 1 copy of the signature. Signatures are set to be applied automatically to new messages or replies- however, if I remove the signature from the template, then it seems no one receives a response with the signature. People sending from Hotmail accounts do not receive a duplicate signature. Gmail users do see a duplicate signature. Does anyone have any idea what could be causing this?

    Read the article

  • Mozilla Thunderbird 3.0.10: Messages are being sent back to me

    - by punkinette64
    When I send an email and I get a response, more often than not, in the To: is my email address. However, my email address also ends up in the From: column.The reply-from address is nowhere to be found;so I don't have any address with which I can send my reply, as both of them have just my email address. What am I doing wrong here? Is there some set-up in my Tools Options which is incorrect? The set-up in Options is pretty difficult to understand and it doesn't offer any to or reply-from choices. This is critical because I just cannot answer my emails because there is no one I can send a reply to.

    Read the article

  • How do I perform multi-window operations on a non-combined group of windows in Windows 7?

    - by BACON
    With multiple windows/instances of an application open and the taskbar buttons set to "Always combine, hide labels", I can Shift + right-click the taskbar button for the window group to open a menu allowing me to "Cascade", "Show windows stacked", "Show windows side by side", "Restore all windows", "Minimize all windows", or "Close all windows". With the taskbar buttons set to "Combine when taskbar is full" or "Never combine", when I right-click, Shift + right-click, or Ctrl + right-click either the button or the Aero preview for a window in the group I get a menu allowing me to perform window operations on just that one window rather than each window in the group. When I have a non-combined group of windows in the taskbar, how would I cascade, stack, etc. that group of windows?

    Read the article

  • Change Win7 desktop background via Win2k3 Group Policy

    - by microchasm
    I'm experiencing some strange behavior: I have set the following policies: User Configuration\Administrative templates\Desktop\Active Desktop Enable active desktop [enabled] Active Desktop Wallpaper [set to local path -- quadruple checked; path is correct] Allow only bitmap wallpaper [disabled] gpupdate /force, log out, log back in, and the background is just black. If I go into themes, and select Windows 7, the appointed background then shows (it also flashes when logging out). gpresult I've tried: http://social.technet.microsoft.com/Forums/en/winserverGP/thread/a1ebfe81-421e-4630-8c1f-8068222ee533 http://support.microsoft.com/default.aspx?scid=kb;EN-US;977944 http://social.technet.microsoft.com/Forums/en/w7itproui/thread/5b9e513a-d504-451d-a121-b4f94893d96d and a few other things, but nothing seems to be working :/ Thanks for any help/tips/advice.

    Read the article

  • Cannot access Windows 7 share from Windows XP

    - by artfulrobot
    I have a new Windows 7 machine named PAP44 in the PAP workgroup. The networking is set to "Work" mode for the wired LAN. I have a couple of users and I've shared a folder and set it so both users can read/write. Confusingly for me, rather than sharing just that folder (as I'm used to with older versions of Windows) it appears to be sharing a path (\\pap44\users\...\myFolder) From another machine on the LAN, running XP, when I go to \\PAP44\Users I'm asked for a username and password, but neither of the usernames+passwords work. It just jumps back to the username and password dialogue, except that the username I entered gets prefixed with PAP44\ My end goal is to get my Debian/Ubuntu machines to be able to access this share, but first of all I thought I'd try to get it working in Windows, after all, that's supposed to be easy! Is there another step? (PS. I am not a "hit and run" case!)

    Read the article

  • Can't perform ODBC connection to MySQL server on local network

    - by Emmanuel
    I have a wamp server running on LAN ip address 192.168.1.101 . From the browser on my PC which is on the LAN I can access the webserver and have as well set the phpmyadmin.conf file to be able to access the phpmyadmin interface. This works smoothly. On the wamp server I have a database which I'd need to access from any PC on the LAN using the MySQL Connector/ODBC. The problem is that I do not manage to setup the connection correctly. Here are the paramenters I use: Data Source Name: test_connection Description: test conenction Server: 192.168.1.101 Port: 3306 User: root Password: Database: The error message I get is the following: Connection Failed: [HY000][MySQL][ODBC 5.1 Driver]Can's connect to MySql server on '192.168.1.101' (10060) Would anybody have a hint to set up correctly the connection?

    Read the article

< Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >