Search Results

Search found 18860 results on 755 pages for 'enigma machine'.

Page 499/755 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >

• Certain drives in RAID 5 set intermittently are not recognized

  - by hydroparadise

  I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

  Read the article

• misaligned raid partition in Ubuntu 10.04

  - by Linux Jedi

  I attached two identical hard drives to my linux machine. Then using gparted I formated the first 1024 mb at the beginning of each drive as linux swap space. Then I went into system-administration-disk utility. In there I went to file-create-RAID array. I selected the remaining space in each of the two identical hard drives and created a striped raid array. After the array was created, a warning message appeared. It said "The partition is misaligned by 522240 bytes. This may result in very poor performance. Repartitioning is suggested." What do I do now? As far as I can tell, the partitions are identical.

  Read the article

• What is the value of workflow tools?

  - by user16549

  I'm new to Workflow developement, and I don't think I'm really getting the "big picture". Or perhaps to put it differently, these tools don't currently "click" in my head. So it seems that companies like to create business drawings to describe processes, and at some point someone decided that they could use a state machine like program to actually control processes from a line and boxes like diagram. Ten years later, these tools are huge, extremely complicated (my company is currently playing around with WebSphere, and I've attended some of the training, its a monster, even the so called "minimalist" versions of these workflow tools like Activiti are huge and complicated although not nearly as complicated as the beast that is WebSphere afaict). What is the great benefit in doing it this way? I can kind of understand the simple lines and boxes diagrams being useful, but these things, as far as I can tell, are visual programming languages at this point, complete with conditionals and loops. Programmers here appear to be doing a significant amount of work in the lines and boxes layer, which to me just looks like a really crappy, really basic visual programming language. If you're going to go that far, why not just use some sort of scripting language? Have people thrown the baby out with the bathwater on this? Has the lines and boxes thing been taken to an absurd level, or am I just not understanding the value in all this? I'd really like to see arguments in defense of this by people that have worked with this technology and understand why its useful. I don't see the value in it, but I recognize that I'm new to this as well and may not quite get it yet.

  Read the article

• Running a Screen instance of a program as non-root

  - by user288467

  I've got a dedicated server (Ubuntu 12.04, no GUI) set up to launch an instance of McMyAdmin and attach it to a screen instance every time I reboot the hardware. I have the command saved to root's crontab as: @reboot cd /var/MC_SVR && screen -dmS McMyAdmin ./MCMA2_Linux_x86_64 Problem being, though, I have a user set up specifically for FTP access to the server files so I don't always have to SSH into the machine. Since the server is being started as a root process, all the files it makes are, obviously, set with root as the owner. So I chown'd all the files and set them to ftpuser. Now I'm stuck with trying to get the process to start as ftpuser. I've tried doing the following but to no avail: cd /var/MC_SVR && su ftpuser - -c 'screen -dmS McMyAdmin ./MCMA2_Linux_x86_64' I try this in terminal and I get no errors or anything (in fact I never get anything unless it's a syntax error from su), but there's no screen instance to access and so I can assume the server never starts. So, what am I doing wrong? Or am I just not accessing the screen instance correctly since it's (supposed) to be launched by another user?

  Read the article

• Ubuntu on Samsung NP700Z5B - no Grub

  - by copolii

  I just bought a Samsung NP700Z5B laptop. Gorgeous machine and great performance! I do 2 things when I get a new laptop: Format the HD and install Winblows from a CD to ditch the bloatware Install some variant of Linux on it (lately Ubuntu) Step 1 worked fine (until earlier today), but I haven't been able to install Ubuntu on it for the past 3 days! I've tried Mint12, Ubuntu 12.04, Ubuntu 11.10, Ubuntu 11.04 and Ubuntu 10.04. The live CD and the installations all run fine and report no problems, but when I reboot grub is nowhere to be found! The system goes directly to Winblows! I've tried booting from the liveCD and re-installing grub via the chroot and purge & reinstall methods (https://help.ubuntu.com/community/Grub2) and neither makes a difference. I've also tried copying the boot sector: dd if=/dev/sda of=linux.bin bs=512 count=1 and putting it on c: then setting bcdedit to add the entry to the Windows bootloader with no results. Earlier today I decided to try and set my boot partition as an EFI boot partition ... bad choice, now I don't even have the Winblows boot loader. I've officially ran out of ideas. Tried calling Samsung, but they're closed (they'd probably say something stupid along the lines of "Samsung recommends Windows 7" ... I've had Dell say that to me). Any help would be greatly appreciated. Update 1 Tried re-installing 12.04 and now I get the screen continously turning off and back on, but still no sign of booting ... it has been doing it for 15 mins so far (I set the boot partition type to ext2 instead of ext4) Update 2 Well ... this just gets better and better. I inserted the installation USB key to reboot it and the flickering stopped for about a minute (remained on) then it started turning off and on again

  Read the article

• Can Windows XP remember file icon position?

  - by g .

  Windows allows you to arrange icons however you like in a window. However after some time when I go back to the window, it has forgotten the icon positions and has completely rearranged the icons. Is there a way to preserve the icon positions? In the previous version of Windows I used, this would happen on rare occasions (about 6 months) and it might only move a couple of icons. Now it is happening practically every day and it is every single icon. Attempts to rearrange them manually are futile and it is increasingly maddening. Searching Google, I have found a number of programs that allow you to save and restore icon position on the desktop. But, this is just a regular folder window so I am not sure if any of those would even work. Some details: Windows XP SP 3 running in Parallels 5 virtual machine Auto Arrange and Align to Grid are NOT turned on Fresh OS install and only setting icon positions in one window

  Read the article

• What causes random clicking/navigation sound while PC is idle?

  - by user14339

  On my Dell D630 laptop running Windows XP Pro SP3, I randomly hear the "Windows Navigation Start.wav" played. This happens even if the only application active on the PC at the time is Microsoft Outlook and no one is touching the keyboard or touchpad. The start navigation sound IS enabled for Internet Explorer (I have IE 7 installed), but it is not running (no window open, anyway). The clicks are rapid, as if being executed automatically by a script or process, and they always come in threes: "click-click, click". I don't see any changes on the display and I don't know how to figure out what's running that could cause this. I have tried to leave Windows Task Manager open in the hope that I'll see a process name jump to the top of the list briefly, but it doesn't happen that often and I guess I'm not quick enough. The PC is slower than I think it should be, but System Idle Process is at 96 - 99 during the event, and for most of the time when I'm not actually using the machine. Any ideas?

  Read the article

• Rsync and Windows 7

  - by Nate

  Can someone give me any tips on setting up some sort of Rsync server/client on Windows 7 to run rsync between both my web hosting server, and a backup server that I have running Ubuntu? I've tried setting it up with this tutorial: http://www.youtube.com/watch?v=CvwdkZLNtnA Using copssh, and cwrsync. Ran into all sorts of troubles, including not being able to get cwrsync to run (it installs properly, but never starts up), and copssh not generating the keys at all. The guy was running Windows Server 2003, though, so I'm guessing the problems could just be because I'm running Windows 7. I've been trying to set it up with my Windows machine being the rsync server, and then Ubuntu and my webhosting VPS as the clients, but I realize it may be easier (and make more sense) to just setup the rsync server on Ubuntu, and then an rsync client on Windows 7? Can anyone point me in the right direction? I'm thinking of using this guide: http://www.gaztronics.net/rsync.php It seems a bit outdated, though.

  Read the article

• Why does my excel document have 960,000 empty rows?

  - by C-dizzle

  I have an excel document, Office 2007, on a Windows 7 machine (if that part matters any, I'm not sure but just throwing it out there). It is a list of all employee phone numbers. If I need to generate a new page, I can click on page 2 and the table will automatically generate again. The problem is, someone messed it up since it's on a network drive and now shows I have over 960,000 rows of data, when I really don't! I did CTRL+END to see if any data was in the last cell, so I cleared it out, deleted that row and column, but still didn't fix it. It almost seems like it duplicates itself after the deletion. How can I fix this instead of recreating the entire document?

  Read the article

• How to pin NetBeans to Windows 7 taskbar?

  - by Vilx-

  I've googled around and it seems that I'm not the only one with the problem, however I couldn't find the solution. Maybe someone around here has figured it out. The problem is that netbeans.exe is actually a stub which is calling javaw.exe. When I try to pin the NetBeans process to the taskbar I actually pin "Java(TM) Platform SE Binary". That changes the icon and the pin doesn't work. The funny thing is that it works on another machine. I don't know whether it's because it's a different version of NetBeans, or a different version of Java. Has anyone figured this out? Added: I know this is sort of not programming related; on the other hand there are plenty of topics around here about how to better your programming environment, and this one is no worse than those. Oh, and btw - Windows 7 Enterprise x64; Java JDK 1.6.17; Netbeans 6.8

  Read the article

• Difficulty racking Proliant G8's

  - by Systemspoet

  We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

  Read the article

• hardware: delay and distinct 'click' before hard drive access

  - by matt lohkamp

  I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

  Read the article

• How much RAM 64bit Windows 8 reserves to OS internal use?

  - by Barleyman

  Windows reserves some memory for it's internal use which is not normally allocated to applications. This reserve is seen most easily if you run without a page file or limit the pagefile to relatively small size (such as 3GB). Windows will allocate primarily RAM up to the limit, fill up remaining free space in the page file (if any) and issue a low memory warning when there is no page file space left and the allocated RAM limit is exceeded. The limit appears to be a percentage of the total system RAM. Windows 7 x64 limit is discussed here and methods for circumventing the "low memory warning" is discussed here. Disabling the low memory warning has some advantages - You can use some 600MB more RAM on 8GB machine) But there is a serious disadvantage - When you're out of ram, programs will crash. How much RAM can you allocate on 8GB Windows 8 x64 before you get the low memory warning? Is it possible to adjust the warning threshold?

  Read the article

• Dummy SMTP server as a service

  - by levidos

  I have a Windows Server 2008 machine with IIS installed which is hosting a webapp that is sending some notification mails once-in-a-while. What I'd like to do is to monitor the email sent by the application. For this I need a dummy SMTP server which intercepts messages but won't send them further but save them locally on the hard disk. I've already found some of them like Papercut, SMTP4Dev. The problem with these that I have to be logged on the server all the time which is not suitable because the server has only 2+1 TS connections. I like to run a program like these as a windows service and check the mails when I need them.

  Read the article

• Search Files (Preferably with index) on Windows 2000 Server

  - by ThinkBohemian

  I have many files on a windows server 2000 machine that is setup to act as a networked disk drive, is there anyway I can index the files and make that index available as a search to more people than just me? Bonus if the index can look inside of documents such as readme.txt? If there is no easy way to do this globaly (for all users) Is there a way I could generate and store an index locally on my computer? If this is the wrong place to ask this question, any advice on community more suited?

  Read the article

• OpenVPN client on Amazon EC2

  - by Matt Culbreth

  I have an account with an OpenVPN service, and I'd like to get that running on my EC2 instance running Ubuntu 12.04. I have my config file in /etc/openvpn, and it connects fine when I run sudo openvpn --config matt.ovpn. However, I then lose connectivity to the EC2 machine, and I can't SSH back to it until I reboot. Previously I have done things like sudo ip rule add from IP_ADDRESS table 10 and then sudo ip route add default via GATEWAY_IP table 10, but that's not working on EC2. Any ideas? My private IP address right now is 10.209.29.XXX and my gateway is 10.209.29.1.

  Read the article

• ADD ROUTE command in windows 2008R2

  - by Mehrdad Kamelzadeh

  I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

  Read the article

• How to Install Apache Solr / Java on CentOS?

  - by geerlingguy

  I've seen only one or two tutorials for installing Solr, and particularly Java, on a CentOS machine, and they seem to be overly complex; heck, I can't quite figure out which version of Java (it seems there are many) to install... I'm not a full time sysadmin, so I would like to know what Java version/package I would need to use, and if there's a good tutorial with relatively easy to follow steps for installation. I'm going to try to get Solr working with some Drupal sites, and that part of the equation doesn't seem as hard as the Java side...

  Read the article

• Hosting and scaling of a facebook application on cloud?

  - by DhruvPathak

  We would be building a facebook application in django(Python), but still not sure of where to host it economically,and with a good provision to scale in case the app gets viral. Some details about the app: i) Would be HTML based like a website,using django as a framework. ii) 100K is the number of expected pageviews in a day,if the app is viral. iii) The users will not generate any media content,only some database data will be generated by them. It would be great if someone with more experience can guide on following points: A) Hosting on google app engine or Amazon EC2 or some other cloud like RackSpace : Preferable points found in AppEngine were ease of deployment,cost effectiveness and easy scaling. For EC2: Full hold of the virtual machine,Amazon NoSQL and RDMBS database services in case we decide to use them. B) Does backend technology affect monthly cost ? eg. would CPU and memory usage difference of Django over , for example , PHP framework like CodeIgnitor really make remarkable difference in running costs. ( Here is the article that triggered this thought process : http://journal.dedasys.com/2010/01/12/rough-estimates-of-the-dollar-cost-of-scaling-web-platforms-part-i#comments) C) Does something like Heroku , which provides additional services over Amazon EC2, prove to be better than raw cloud management ? It is not that we are trying for premature scaling, we just want to have a good start so that we are ready to handle unpredicted growth and scale.

  Read the article

• Name of my sql server instance from outside the network

  - by Michel

  Hi, normally i connect to my sql server instance from my local computer, and then the server name to connect to is the name of my laptop. So i can connect to server instance 'MichelLaptop' But now i'm trying to connect to my server from outside my network, and the first thing i wonder is: what is the name of the instance? i've made a redirect to my local machine in the DNS of my domain, so i said (this is not the real data) testsql.mydomain.com goes to 190.191.192.193 and when i ping testsql.mydomain.com, i get a response from 190.191.192.193 But what then is the server name?

  Read the article

• Newbie: VirtualBox "no bootable medium found"

  - by Newton Falls

  My first foray into VM land so please excuse the stupidity expressed below. Running VirtualBox on Kubuntu 9.10 and trying to set up a VM running Windows 7. Windows 7 came installed and is functional as a dual-boot but I want to stay in kubuntu hence the VM. Received "Fatal: no bootable medium found" when trying to start a VM. Not surprising since VBox never gave me an option (that I recognized anyway) to tell it to look on the hard drive. I did not receive a CD of Windows 7 with the machine. How can I tell VirtualBox to grab what it needs from the hard drive? Or am I out of luck because I don't have a CD? Update: This might not be possible. The installed Windows 7 is useful only to pull the installation key. It is easier to just to download or get an ISO from a friend and enter in your own key.

  Read the article

• Unable to create a Windows 7 system image of a failing hard drive

  - by Rahul

  The hard disk of my one year old T400 Thinkpad has started failing periodic hardware tests. I get a "Targeted Read Test Failed" error. The "SMART short self test" times out. I am now trying to create a Windows 7 System image of the hard disk but it fails without giving any specific error messages. I tried using Comodo Backup but got an error (code 101117) there as well. I have copied the important files in Dropbox but would like to take a full System backup as I have plenty of software installed on the machine. Does anyone know why this is happening and how I can take a backup of the system image ?

  Read the article

• changing filesystem format from jfx to ext4 without losing data

  - by A.Rashad

  I have a fresh Lucid Lynx (Ubuntu 10.04) running on a laptop. where I defined the filesystems as: mount point / on ext4 (46 Gb) mount point /home on jfs (63 GB) swap as 3 Gb I left the machine over night to do some task, without AC power supply. next day in the morning I found it on standby, task completed, but filesystem was not reachable. it gave me I/O error it seems that there is a problem with jfs and standby. anyways, to avoid any hassle, I want to move this mount point from jfs format to ext4. can I do this without losing data and without the need to place the data in a temporary location until transformation is done? sorry to mention that, but I recall back in the windows days, we would change a FAT16 to FAT32 or a FAT32 to NTFS without having to lose the data. I hope this is available on Linux.

  Read the article

• Problem with alleg42.dll / program crashes / Allegro & Codeblocks

  - by user24152

  I'm having a serious problem with allegro. The program should display random pixels on the screen and when I build and run it I get the following error message: Below is the full code of my program: #include <stdio.h> #include <stdlib.h> #include <time.h> #include "allegro.h" #define Text_Color_Red makecol(255,0,0) int main() { int ret; int color_depth = 32; int x; int y; int red; int green; int blue; int color; //init allegro allegro_init(); //install keyboard install_keyboard(); //set color depth to 32 bits set_color_depth(color_depth); //init random seed srand(time(NULL)); //init video mode to 640 x 480 ret = set_gfx_mode(GFX_AUTODETECT_WINDOWED,640,480,0,0); if(ret !=0) { allegro_message(allegro_error); return 1; } //Display string textprintf(screen,font,0,0,10,0,Text_Color_Red,"Screen Resolution is: %dx%d -- Press ESC to quit !",SCREEN_W,SCREEN_H); //display pixels until ESC key is pressed //wait for keypress while(!key[KEY_ESC]) { //set a random location x = 10 + rand() % (SCREEN_W-20); y = 10 + rand() % (SCREEN_H-20); //set a random color red = rand() % 255; green = rand() % 255; blue = rand() % 255; color = makecol(red,green,blue); //draw the pixel putpixel(screen, x, y, color); } //quit allegro allegro_exit(); } END_OF_MAIN() Error message: AllegroPixels1.exe has encountered a problem and needs to close. We are sorry for the inconvenience. Error signature: AppName: allegropixels1.exe AppVer: 0.0.0.0 ModName: alleg42.dll ModVer: 4.2.3.0 Offset: 0006c05c I am using Windows XP inside a virtual machine under Parallels 7.0

  Read the article

• Text template or tool for documentation of computer configurations

  - by mjustin

  I regularly write and update technical documentation which will be used to set up a new virtual machine, or to have a lookup for system dependencies in networks with around 20-50 (server-side) computers. At the moment I use OpenOffice Writer with text tables, and create one document per intranet domain. To improve this documentation, I would like to collect some examples to identify areas where my documents can be improved, regarding general structure and content, to make it easy to read and use not only for me but also for technical staff, helpdesk etc. Are there simple text templates (for example for OpenOffice Writer) or tools (maybe database-driven) for structured documentation of a computer configuration? Such a template / tool should provide required and optional configuration sections, like 'operating system', 'installed services', 'mapped network drives', 'scheduled tasks', 'remote servers', 'logon user account', 'firewall settings', 'hard disk size' ... It is not so much low-level hardware docs but more infrastructure / integration information in these documents (no BIOS settings, MAC addresses).

  Read the article

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >