Search Results

Search found 14251 results on 571 pages for 'identity management'.

Page 499/571 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >

  • VirtualBox with Ubuntu Server guest can't ping outside

    - by Danidan
    Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

    Read the article

  • Can’t connect to SQL Server 2008 - looks like Shared Memory problem

    - by Proposition Joe
    I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

    Read the article

  • New AD user request form and workflow

    - by user66390
    I'm wondering if anyone is providing a solid solution for creating New Network User Account Request forms, and attaching workflows to them to automate account creation? I'm currently investigating a number of options, but am surprised that such a ubiquitous task hasn't been solved a dozen times over and thoroughly documented. Or at least isn't integrated into current off-the-shelf change management and ticketing systems. Ideally, I'd like for our current ticketing system, ServiceDesk+ to present a standard 'New User' form to department heads, which they can fill in with the required new user details. This triggers a workflow that submits the request as a ticket that can be reviewed and actioned. Actioning the ticket triggers a workflow that creates a user in AD with the details provided, and notifies the department head upon completion. All told, a pretty standard requirement that I'm sure most organizations have. What are other people doing to accomplish this? Edit: I should add, I'm more looking for "supported" methods. As is, I've submitted a number of scripted solutions, none of which have met with manager approval.

    Read the article

  • OpenOffice Vs Microsoft Office 2007/2010

    - by Moody Tech
    I have been asked to summarise the pros and cons in connection with the choices between Microsoft Office Vs OpenOffice. I have a broad idea of what needs to be said. However I would like to open a discussion here and have a single place to go to when the time comes to give the summary to management. There are obvious points of contention: For me the lack of compliance with Group Policy is a major concern [Default save location/visibility of C:/Visibility of files and folders on the HDD] However I am sure that functionality and compatibility will be the prime mover. We are looking at making major savings by reducing our commitment to Microsoft licensing. So what are your experiences? What happens when there are no direct equivalents? [Word has a close match in OpenOffice, but a database solution match is not as close, neither is an Outlook [connecting to Exchange Server and downloading all calendars, shared calendars, scheduled events, for Exchange will still exist after the move to OpenSource solutions] In summary then: What do you see as: The benefits of this plan? How do you see the problems being manifest? Discuss.... Many thanks.

    Read the article

  • Synchronizing the SamAccountName Property using Windows Azure Active Directory Sync Tool

    - by pk.
    Using this official documentation as a guide, I would expect the SamAccountName property to sync from my on-premise AD to Office 365. I think that it used to do exactly that, but now it seems that it doesn't so much sync the attribute as it does create an entirely new, unlinked value and store it in Office 365. This has caused some minor issues for me (broken scripts, annoying permissions management, etc.) and may be part of a more major issue regarding ADFS authentication. On-Premise PS C:\Windows\system32> Get-ADUser jdoe -Properties SamAccountName | fl SamAccountName SamAccountName : jdoe Office 365 Sync'ed Objects PS C:\Windows\system32> Get-Mailbox jdoe | fl SamAccountName SamAccountName : $1A7H20-K1LCOJFFBHGS I understand how to work around this issue in my scripts -- there exists the ImmutableId property which can be mapped back to the on-premise GUID. As far as the issue I'm having with ADFS, I'm less certain how to proceed and if this is causing my issues. At this point I really would just like some verification that I'm not crazy and that this used to be sync'ed at some point in the past and that Office 365 broke it relatively recently. I also think that MS documentation should perhaps be updated to exclude SamAccountName from the list of synchronized properties on the page I linked.

    Read the article

  • Need a helpful/managed VPS to help transition from shared hosting

    - by Xeoncross
    I am looking for a VPS that can help me transition out of a shared hosting environment. My main OS is Ubuntu, although I am still new to the linux world. I spend most of my day programming PHP applications using a git over SSH workflow. I want PHP, SSH, git, MySQL/PostgreSQL and Apache to work well. Someday after I figure out server management I'll move on to http://nginx.org/ or something. I don't really understand 1) linux firewalls, 2) mail servers, or 3) proper daily package/lib update flow. I need a host that can help with these so I don't get hit with a security hole. (I monitor apache access logs so I think I can take it from there.) I want to know if there is a sub $50/m VPS that can help me learn (or do for me) these three main things I need to run a server. I can't leave my shared hosts (plural shows my need!) until I am sure my sites will be safe despite my incompetence. To clarify again, I need the most helpful, supportive, walk-me-through, check-up-on-me, be-there-when-I-need you VPS I can get. Learning isn't a problem when there is someone to turn too. ;)

    Read the article

  • NAS for Mac OS X Server

    - by SamAdmin
    I'm using Mac OS X Server and want to allow the users that connect to their network accounts to store their data on a NAS drive. I want the users to connect to the Lion server as this allows for better policies and management for me and for their afp share to be located on a NAS drive. I've looked into home directories and network logins however I don't want the users to connect into a different login environment, just an authentication against their provided account on the Lion server and for their finder to take them to their own storage area - located on the NAS drive. Currently I am using FreeNAS for both authentication and storage however there are getting to be far too many people to manage each afp share and account, plus just using FreeNAS is extremely limiting for expansion and if something goes wrong with 1 entity the entire system goes down. Using the Lion server for user accounts and policies will be much better for this expanding business. I have looked into LDAP, using the Lion server as an LDAP server to authenticate against for FreeNAS however I have had issues with this and thought a different approach could be better from the other side of the situation... Providing the account with somewhere to store data rather than the afp share authenticating against an LDAP server. I am wrong to try it this way? Is it possible to logically add storage to a Mac OS X Server which can be recognised as a local drive, so can be used for network accounts?

    Read the article

  • Euro character messed up during FTP transfer

    - by djechelon
    My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

    Read the article

  • Sound doesn't work anymore after replacing RAM

    - by thejh
    Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

    Read the article

  • sub application and virtual directory file permissions

    - by Zeus
    I have a website setup in IIS7, exampledomain.com. Under the application exampledomain.com lives a sub application cms. In a rather convoluted way, we have content in our cms system in this sub-app, under cms\content\{generatedfoldername}. So to access an image in this content, the full URL would be http://www.exampledomain.com/cms/cms/content/{generatedfoldername}/image.jpg, (yes, cms twice...) and this works just fine. Now, we have a virtual directory under the parent website, called stuff which points at the content of the cms. So I should be able to get to the image using the url http://www.exampledomain.com/stuff/{generatedfoldername}/image.jpg. Unfortunately this gives a server 500 error "There is a problem with the resource you are looking for, and it cannot be displayed." Whilst you do have to log into the cms system to access any of the admin pages within, I don't think the image files are protected by login, or else the first example URL wouldn't work, right? Also it's a server 500 error, rather than a 403. I'm sure I must be missing something obvious here- will the virtual directory be using the permissions defined in the parent application, or the subapplication to which it is pointing? Or is there some other permissions I may have missed? Sorry, that was a bit long, thanks for reading all the way down here! (I also must point out that I'm pretty new to the server management stuff.) edit: also, we have <location path="." inheritInChildApplications="false"> specified in the webconfig of the parent app, so it's hopefully not the issue described in this config file hierarchy article.

    Read the article

  • Application Screen Repainting Issues

    - by Jeff Sheldon
    I have this issue lately at work. It drives be nuts, and I finally stopped to ask this question. It's quite often that an application I've been running just randomly fails to repaint itself for a while, usually in the editor screen. I most often see this occurring with Expression Web, Visual Studio 2008/2010 and SQL Server Management studio. These applications are what I work in the most, so I'm not surprised to mostly see it here. But I was curious if anyone else had a solution for this. I've tried: Reboots. The screen shot below is about 10 minutes after a reboot. New Video Drivers. This machine is running a Nvidia Quadro NVS 290 video card with the latest drivers. Closing other applications, this is the only thing running right now. As far as hardware, this machine has Dual Quad-Core Xeon 2.83ghz Processors, with 10 gigs of memory, running Windows XP SP3 64bit. Any help would be great. JNK EDIT: Per comments from deleted (wrong) answer: I'm running dual monitors. Set it to single display, still occurred. Rebooted, and tried it again, and it still occurred. Switched it back to dual screen. My resolution is only 1400x900 on each.

    Read the article

  • IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

    - by JohannesH
    I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

    Read the article

  • Log Problem and bash script

    - by GvWorker
    Hello Guys, I have 11 Debian servers running on rackspace cloud hosting. All running VHCS2 for hosting management. 1 server is used for application and 10 are used for only smtp. My question is regarding smtp servers. Each server hosted 1 domain. My problem is when my client use smtp there's a log created in this directory /var/log/ but within 24 hours drives are full and server refuse all smtp connections. Then I deleted the logs and ran following command to check the disk space. df -h but it shows hdd still full and server is still refusing the smtp connections. Then I ran following command to see the truth du --max-depth=1 -h It shows the truth. The real disk space used. Then I rebooted the server and now server working fine. But after few hours same situation happened. Then I created the following script. #!/bin/sh rm -fr /var/log/* rm -fr /var/log/apache2/*.log rm -fr /var/log/apache2/*.log.* rm -fr /var/log/apache2/users/* rm -fr /var/log/apache2/backup/* reboot It worked for days but after that logs are again filling the hdd. Now I want the following solutions. If anybody can help me. When I delete files from server hdd will free up without rebooting Log should be in specific range. Like a specific size of file where old data overwrite with new data

    Read the article

  • Setting up a global MySQL Cluster in the cloud

    - by GregB
    I'm giving the question an overhaul to more specifically identify where I need help. I use two tools to manage a bunch of cloud server: Puppet and Rundeck. Both of these can be configured to use a mysql backend. I'd like to setup an instance of each application in both the U.S., and the U.K., treating the U.K. servers as hot stand-bys in case of failure in the U.S. I want to use a MySql cluster so that the data is automatically replicated from the U.S. to the U.K. Because these are hot standbys, high performance is not a goal. Redundancy and data integrity are most important. My question revolves around the setup of the mysql cluster. I want to run three servers, each one running a data node, a sql node, and a management node. Is this a valid configuration for mysql server? If so, could someone point me in the right direction for creating such a setup? I've downloaded the offical tarball, and the official debian, and the documentation for them contradicts many of the online tutorials. I'm installing on Ubuntu 10.04.

    Read the article

  • customer wont provide ssh access - ftp only

    - by Max
    Eh, here is my problem: I am working in a webdevelopment agency (thats a problem but not the real problem, read on). Most of the time I choose the live server myself when creating a new website project. But now the customer already has a "server" (10 GB on a cheapo host!) and the "admin" refuses to give me ssh access to it. But I need to access the server via shell because many files will be transported (need to be able to upload and extract a tar) and I need to insert or create mysql dumps via command line. He argues FTP and phpmyadmin should be enough... as far as I know the webspace was just ordered to host the website, so no security critical apps are running there. How can I either convince the admin to give me the ssh login or tell management that we need our own server? Anyone with similiar experiences? This is really annoying as this is a very small project that should be done fast and now one has to fight in order to just get the work done...

    Read the article

  • Remotely port forward/launch process or a client-less remote desktop app?

    - by DC177E
    I have an XP box running Logmein at a remote location behind a linksys router, which was running well for a whole of four days, until we had a power failure. Our ISP gave us a new IP, the machine restarted, and logmein did not autorun (or, at least, it did not automatically sign in), and our service (which may or may not be a Minecraft server with non-backed-up save files) also did not run upon startup. Logmein does not register the new IP (it still displays the old one). I have a DDNS updater service, so I do know the new dynamic address. I have tried using the built in XP remote desktop service, but, as with almost all non-cloud-based remote desktop services, it requires a port forward. Thus, I would appreciate it if anyone has any ideas as to: A: Any way of accessing our router remotely to forward the remote desktop port. I've seen the Remote Management option (forwarding the setup page to port 8080), but I do not have it enabled. I've tried UPnP, but again, the setup page for our router is not forwarded. B: Any way of remotely launching a process that does not require port forwarding (or uses ports 255XX, 18XXX, or 9000.), such as a remote console service built into XP. I realize this is a near impossibility. C: A Way to remotely start logmein, and sign in, which is likely a definite impossibility. Sorry if this is too specific for Stackexchange, or if I've put it into the wrong section (is SuperUser the correct place for this?). Ideas would, again be much appreciated, as shot-in-the-dark-like this may be.

    Read the article

  • Best way to restrict access to a folder in Dropbox

    - by Joe S
    I currently run a business with around 10 staff members and we currently use Dropbox Pro 100GB to share all of our files. It works very well and is inexpensive, however, I am taking on a number of new staff and would like to move the more sensitive documents into their own, protected folder. Currently, we all share one Dropbox account, I am aware that Dropbox for teams supports this, but it is far too expensive for us as a small company. I have researched a number of solutions: 1) Set up a new standard Dropbox account just for use by management, which will contain all of the sensitive documents, and join the shared folder of the rest of my team to access the rest of the documents. As i understand it, this is not possible with a free account, as any dropbox shared folder added to your account will use up your quota 2) Set up some sort of TrueCrypt container, and install TrueCrypt on each trusted staff member's machine, and store the documents inside that. Would this be difficult to use? I'd imagine the sync-ing would not work so well as the disk would technically be mounted at the time of use and any changes would be a change to the actual container rather than individual files. I was just wondering if anyone knows a way to do this without the drawbacks outlined above? Thanks!

    Read the article

  • Is there an simple but good To Do Manager app for the Mac?

    - by Another Registered User
    Every morning I think about what I am going to do today. So I take a paper and start to write things like: [ ] Call Mr. XYZ [ ] Answer Support E-Mails [ ] Reduce website header height by 20 px [ ] Create new navigation bar icons And every time I'm done with something, I paint a checkmark in this square. On paper. It would be fun to have something like this as an application. But I don't want a heavy project management tool or integration with email. It should be like download, install, use without fat configuration and steep learning curve. usually I don't schedule my to do's, I just write down every day what I want to accomplish today. For my experience it doesn't make sense to plan what to do next week, because next week everything looks totally different. Would be cool if such a simple utility exists. At the moment I try just using textEdit and deleting rows which are done. With a nice interface, this would be much more fun.

    Read the article

  • Calculating memory footprints using /proc/sysvipc/shm

    - by MarkTeehan
    This is for a SLES 10 database server. One of my servers runs three databases and three app servers; I am analyzing how their shared memory segments grow and shrink to avoid intermittent out-of-memory scenarios. "Top" is hot helpful for this since its calculations for RES and VIRT are inconsistent. I am doing this by matching up the contents of /proc/sysvipc/shm with memory usage reported by the database admin console. I do this by totaling up saving the contents of /proc/sysvipc/shm and then total up "bytes" for all of the segments for the offending userid. This is a large server with hundreds of segments and tens (or hundreds) of GB of allocated memory per userid. However it doesn't match up - the database management software claims to be using around 25% more memory than the total I calculate. Negligible swap space is in use, so I am ignoring that. I am running it as root so I am sure I see all shared memory segments. My question is : is all (significant) allocated memory recorded in /proc/sysvipc/shm, or is this only shared memory (*and not "un-shared" memory?). If this is incorrect, what is the correct way to calculate out the total allocated memory for each userid? Also: I believe doing a 'cat' on this file locks server IPC. I check it every 5 seconds - is it likely that this frequency could be problematic? Thanks! Mark Teehan Singapore

    Read the article

  • How does KMS (Windows Server 2008 R2) differentiate clients?

    - by Joe Taylor
    I have recently installed a KMS Server in our domain and deployed 75 new Windows 7 machines using an image I made using Acronis True Image. There are 2 variations of this image rolled out currently. When I go to activate the machines it returns that the KMS count is not sufficient. On the server with a slmgr /dlv it shows: Key Management Service is enabled on this machine. Current count: 2 Listening on Port: 1688 DNS publishing enabled KMS Priority: Normal KMS cumulative requests received from clients: 366 Failed requests received: 2 Requests with License status unlicensed: 0 Requests with License status licensed: 0 Requests with License status Initial Grace period: 1 Requests with License statusLicense expired or hardware out of tolerance: 0 Requests with License status Non genuine grace period: 0 Requests with License status Notification: 363 Is it to do with the fact that I've used the same image for all the PC's? If so how do I get round this. Would changing the SID help? OK knowing I've been thick whats the best way to rectify the situation. Can I sysprep the machines to OOBE on each individual machine? Or would NewSID work?

    Read the article

  • cannot get mssql working with sql server 2005

    - by Ryan
    I'm a MySQL/Apache user, trying my hand with IIS and SQL server, so please, if this is a stupid question have patience. I'm using IIS version 7.5. PHP version 5.3.13 and SQL server 2005 IIS is running on port 90, not sure if that will make a difference or not. I know my sql server is running because I can explore/connect to it in Server management studio. I know php is configured properly, because //localhost:90/phpinfo.php works fine. I updated the php_msql.dll extension in phpinfo to: extension=ext/php_msql.dll EDIT- However, when I run phpinfo() under the "configure command" row, this is present: --without-mssql I found/downloaded the ntwdblib.dll and placed it in both sys32 and php root. All these things were supposed to fix the issue, and they haven't. This is the code I'm using, straight from php.net: <?php // Server in the this format: <computer>\<instance name> or // <server>,<port> when using a non default port number $server = 'localhost'; // Connect to MSSQL $link = mssql_connect($server, 'uname', 'pwd'); if (!$link) { die('Something went wrong while connecting to MSSQL'); } ?> obviously I'm using a real username and password, but when I load the file in my browser, I receive a 500 error. Upon checking the log, this is what is displayed: 2012-06-25 12:41:29 ::1 GET /test.php - 90 - ::1 Mozilla/5.0+(Windows+NT+6.1;+WOW64)+AppleWebKit/536.5+(KHTML,+like+Gecko)+Chrome/19.0.1084.56+Safari/536.5 500 0 0 5 That (to me) doesn't help me much. What am I doing wrong? Thank you

    Read the article

  • Windows 7 pc freezes for an indeterminate amount of time after unlocking

    - by pikes
    Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

    Read the article

  • How can I import tasks into Project that have already been started?

    - by unknown
    I am writing a feature to import tasks from an online bug tracking / project management tool into Microsoft Project, primarily for resource leveling. Currently I am importing all tasks in as Fixed work, and giving them an assignment to a single resource for 100% of the work. The duration is then dynamically calculated, which at import time is equal to the amount of work. However, I am not a project manager by any means, and am having difficulty on how to get the start dates to calculate correctly. I've never used Project either. I am using Schedule From Start and setting the Project Start Date to the date the contract was signed / work was approved. However, this can be in the past, and I do not want current tasks scheduled from that date. Should it be today then? Another problem I have is with tasks that were already started. I have remaining work set, and I was placing a constraint on them to be started on the day the work was first applied. However, the remaining work for the task would be scheduled from that date, which was sometimes in the past. Using task constraints, a project start date, and whatever other settings available to me that I don't know about, what is the correct way to have the tasks scheduled?

    Read the article

  • Ethernet cable unplugged after updating from windows 8.0 to 8.1

    - by Pehmolelu
    Yeah, so I went and updated my windows 8 pro to 8.1. Now everything else seems to work but the network. The Ethernet just says that Network cable is unplugged, even though it is plugged and I have tried different cord as well and I have tested that the router works. I have tried uninstalling the network drivers (Realtec PCIe GBE) and reinstall them with no success. After installing drivers the Device Management gives error for it "Device could not be started. Code 10" Before 8.1 update I had rt630x64.inf, after update it was netrt630x64.inf, and after installing the latest driver rt630x64.inf. With rt630x64.inf there isn't any error, but it's still not just working. New downloaded version: 8.020.0815.2013 (From Realtek website) The driver before: 8.1.510.2013 (After updating the windows to 8.1) I'm using Desktop PC, no VM. I dont have VirtualBox or Vmware installed. I have checked from BIOS that the card is enabled. I have booted in safe mode with network enabled. Says unplugged there as well. I have put the power off for few minutes and put back on, no effect. If anyone has any kind of suggestions, please tell.

    Read the article

  • fglrx-legacy-driver not seeing Radeon HD 4650 AGP

    - by Rocket Hazmat
    I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got glrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci

    Read the article

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >