Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 499/627 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >

  • Find routers IP address on the other side

    - by corsiKa
    Here's the basic setup of my network In this diagram: 1: The internet c: cable 2: Wireless router w: wireless connection 3: A win7 box with internet connection sharing enabled 4: A wireless router, but I'm only using its LAN capabilities to connect box 5 to the internet. 5: A win7 box, the computer I'm using to make this post. So its internet works just fine. Now if I'm on box 5, and I ping 192.168.1.1, I hit 4. If I'm on box 3 and I ping 192.168.1.1, I hit 2. Now obviously box 3 does not think 4's IP address is 192.168.1.1, or I wouldn't be able to connect to the internet. Okay, now that you know as much as I do about my network, here's my question: If I was on box 3, how would I determine the IP address of 4? Basically I'm running a webserver on box 5 and want to access this webserver on box 3 and other boxes. So that's the end goal. If there's other information there that can help, I'd appreciate it. Thanks!

    Read the article

  • Slow RDP after server joins domain

    - by Chris Grove
    We're having RDP issues with Amazon cloud servers that we recently joined to an Active Directory domain. The setup is: A local office network A virtual private cloud in Amazon An IPSec tunnel between the two networks A number of Windows 2008 R2 servers on both networks An AD domain (call it abc.net), with one domain controller in each network. The domain controllers are both new, fresh installs. Before we had the domain set up we had local accounts for the cloud computers which were used for RDP access. Our idea was to get all of the servers on to the domain so we could use domain logins instead of per-server local logins. Before the cloud servers were in the domain, RDP (from the office network or through a VPN to the cloud) worked great. After we joined the cloud servers to the domain, RDP from the office became very slow - a few minutes to log in, long frequent pauses when the interface is unresponsive, generally just a slow and frustrating experience. This is a problem regardless of whether a domain or local login is used for RDP. Oddly, when outside of the office network and connecting to the cloud directly with the VPN, RDP is still very responsive. Any idea why RDP from office to cloud is suddenly very slow after the cloud servers join the domain? What can I look at in our configuration to address this? Any help is greatly appreciated.

    Read the article

  • logrotate deletes all maillogs older than one day

    - by shadyabhi
    I see only two files maillog and maillog.1 in /var/log. grepping for maillog in logrotate.d directory gives three files that have a mention of maillog. syslog /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron { #/var/log/messages /var/log/secure /var/log/spooler /var/log/boot.log /var/log/cron { daily sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } syslog-ng /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron /var/log/kern.log /var/log/kern { sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } and maillog. /var/log/maillog { daily compress # rotate 365 rotate 14 sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } I am new to logrotate so may be I am missing something obvious. What can be the issue? The setup was already done when I started managing the server so I don't also know as do why do I have 3 mentions for maillog in logrotate.

    Read the article

  • Toshiba A205-5804 freezes when plugged in

    - by heron
    Well I have a Toshiba A205-5804 and the problem is that the screen freezes anytime I plug the pc into the external power supply, not as most of the computers having the same issue, my computer DOES freeze in safe mode, and I really can't bear this problem for much longer... It's not an overheating problem, the computer is not getting hot or anything related, I've already tried changing the AC adapter, booting only with AC and no battery, and also all of these suggestions: Try changing the following setting in the bios setup, under the 'Advanced' tab Dynamic CPU Frequency: Mode = Always Low (NOT DYNAMIC) My laptop has been running on AC power without a problem for 24hours, including many restarts, and when I went back to the original bios setting, the problem returned almost straight away. EDIT Other suggestions I found on the web from here and here: Set the power plan to high performance Set the power plan to "Minimal Power Management" (1 and 2 do conflict) Start - Control Panel - Device Manager -- Processor - disable one of two processors - reboot normally 4.Do this: Only plug battery into laptop Turn on the laptop and start Windows normally Plug AC adapter into laptop, the screen will freeze Leave the laptop the way it is for 12-24 hours After 12-24 hours, turn it off the hard way Once it is turned off, turn it back on. The laptop is working now. I have no idea of what can it be...

    Read the article

  • Remote access to phpmyadmin from computer belongs to same LAN

    - by Charles
    OK... I solved it. It is because I have not configured the httpd.conf to allow the centos listen port 80 and 8080. Listen 80 Listen 8080 I have setup the myphpadmin on my CentOS 6.4 recently. I can access and login to the myphpadmin on my localhost. However, when I type http://[hostipaddr]/phpmyadmin on my other computer in the same LAN with the CentOS, the browser simply cannot access the page. Below are some of the current configuration. Anyone can help please......? config.inc.php $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; /* Server parameters */ $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = false; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysql'; $cfg['Servers'][$i]['AllowNoPassword'] = false; phpmyadmin.conf <Directory /var/www/html/phpmyadmin/> order allow,deny allow from all </Directory> Furthermore, I can access the webpage that stored in the CentOS from my other computer without problems. After using wireshark and tcpdump, I found that the server (the Cent OS) keep resetting the connection. (192.168.1.106 is my other computer, 192.168.1.101 is my CentOS) 23:29:42.281473 IP 192.168.1.106.55999 > 192.168.1.101.webcache: Flags [S], seq 2559409090, win 65535, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 23:29:42.281504 IP 192.168.1.101.webcache > 192.168.1.106.55999: Flags [R.], seq 0, ack 2559409091, win 0, length 0 I have disabled the iptables service on the CentOS already.

    Read the article

  • Automated Syslog Error Solution Finder

    - by Dru
    Any automated syslog solution finding frameworks? I want my central syslog server to email a list of problems, their severity and suggested solutions. There have been several questions about centralising system logs and alternative log analysis systems, but I don't get the impression that any of them help with issue resolution. A little background: At work I am now literally doing the work of two people, and both jobs have expanded beyond their initial frameworks. It is not so bad as I have helpers, but they are little more than smart monkeys. While one of my predecessors [I have two, that is how I know I have the jobs of two people] set-up logwatch to email its results out, my monkeys don't have the skills necessary to identify unimportant data. This has caused all of them, and myself sadly, to setup email filters and ignore the whole thing until something goes "bang". It would be handy to have someone else tell them what is important, what is connected, and to suggest a few ways to resolve the issue (I could train then to research the solution first, ha!). My reading of the Splunk and Octopussy sites indicates that I still need to bring my own highly trained monkey to the party. Which I am several years from having.

    Read the article

  • Very Slow DSL (ethernet) speed [New Interesting Update]

    - by Abhijit
    Very IMPORTANT and INTERESTING UPDATE: Due to some reason I just thought to do a complete new setup and this time I decided to again have openSUSE plus ubuntu. So I first reinstall lubuntu and then I installed OpenSUSE 12.2 (64 bit). Now, my DSL speed is working very normal and fine on opensuse. So this is very scary. Is it possible for any operating system to manipulate my NIC so that it will work fine only on that operating system and not on another os? Regarding positive thinking and not being paranoid, what is it that makes ONLY suse to get my NIC to work at normal speed but ubuntu can not do it? Not even fedora? Not even linux mint? What all these OS are lacking that enables suse to work great? == ORIGINAL QUESTION == I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

    Read the article

  • SBS DC DNS entries going missing?

    - by Chris W
    I've been looking at a problem on a friends SBS (2003) server where the client PC's aren't able to connect to the server with a variety of errors reported. Checking the server itself the only indicator of an issue is an error 5782: Dynamic registration or deregistration of one or more DNS records failed with the following error: No DNS servers configured for the local system. Running a dcdiag reports that there are no DNS records registered for the DC so I fixed the problem by doing a netdiag /fix after which the dcdiag comes back clean and clients are ok again. It happened a few weeks ago as well and the same fix solved it. What are the possible causes of the DC DNS entries going missing? Is this a config option that needs tweaking or could it be solved by something simple like scheduling the SBS server to re-boot periodically? The only change they can think of that was made near to the time of the first instance of this problem occurring is that RRAS was started up to allow for a VPN connection from a home user. NB - The server is setup with a pair of NICs in a team so the server has a single virtual NIC providing both LAN/WAN connections to it. An external hardware firewall is in use rather than the windows firewall.

    Read the article

  • Windows Vista Wrong Certificate With SNI

    - by JamesArmes
    I'm setting up SNI on an apache server and I thought things were going well. I have two URLs from different domains that point at the same site. I have one virtual host setup for each with the appropriate certificate for each. One of the certificates is valid but the other is self-signed (waiting on GoDaddy for the real cert). If I test the different URLs in Firefox, Safari and Opera all works well. I get no errors for the URL with the valid certificate and I get a self-signed warning for the other. However, in Internet Explorer 8 and Google Chrome, both URLs return the valid certificate (even if its not valid for the specific site). So for the one site, I get a valid certificate. For the other, I get a warning about the cert being for a different site. I tried switching the order of the vhosts and it made no difference. I know that Chrome and IE both use Window's HTTP stack so I understand why the behavior is the same for the two. What I don't understand is why I'm seeing this behavior.

    Read the article

  • Windows Not Honoring DHCP Scope

    - by jerhinesmith
    Please bear with me as I'm not a networking person by trade. Our current configuration at work includes two Windows Servers serving as DHCP/Active Directory servers (if that makes sense) -- one replicating from the other. On both machines, the DNS resolution is set up as: Main Windows Box (10...* address) Public IP Address (for Verizon) Public IP Address (secondary Verizon) Secondary Windows Box (10...* address) Assuming our domain is foo.com, we maintain the foo.com website on a hosted VPS with it's own IP address. The problem is that even though bar.foo.com is an internal server and is defined in DNS on the Primary Windows machine, when I ping bar or even bar.foo.com it resolves to the hosted IP address instead of the 10.* address. I tried taking both of the Public IP addresses out of the DHCP scope, and that seemed to work, but it completely slowed down access to any external sites, so that wasn't acceptable. I also tried adding the two Windows machine as the DNS servers on my desktop. That too worked, but I'd rather not have everything enter their DNS servers, as the above setup should theoretically be working. Is there anything I could check to see why pinging bar.foo.com isn't resolving to the DNS entry on the Windows machines? Here's a summary of the ping results, if they help: Pinging from servers with static IP bar.foo.com resolves with correct IP address Pinging from linux machines not joined to the domain bar.foo.com resolves with correct IP address Pinging from user's desktop machines, joined to the domain, but dynamic IP bar.foo.com resolves with incorrect IP address This is driving me crazy!

    Read the article

  • Sending mails via Mutt and Gmail: Duplicates

    - by Chris
    I'm trying to setup mutt wiht gmail for the first time. It seems to work pretty well, however when I send a mail from Mutt i appears twice in Gmail's sent folder. (I assume it's also sent twice - I'm trying to validate that) My configuration (Stripped of coloring): # A basic .muttrc for use with Gmail # Change the following six lines to match your Gmail account details set imap_user = "XX" set smtp_url = "[email protected]@smtp.gmail.com:587/" set from = "XX" set realname = "XX" # Change the following line to a different editor you prefer. set editor = "vim" # Basic config, you can leave this as is set folder = "imaps://imap.gmail.com:993" set spoolfile = "+INBOX" set imap_check_subscribed set hostname = gmail.com set mail_check = 120 set timeout = 300 set imap_keepalive = 300 set postponed = "+[Gmail]/Drafts" set record = "+[Gmail]/Sent Mail" set header_cache=~/.mutt/cache/headers set message_cachedir=~/.mutt/cache/bodies set certificate_file=~/.mutt/certificates set move = no set include set sort = 'threads' set sort_aux = 'reverse-last-date-received' set auto_tag = yes hdr_order Date From To Cc auto_view text/html bind editor <Tab> complete-query bind editor ^T complete bind editor <space> noop # Gmail-style keyboard shortcuts macro index,pager y "<enter-command>unset trash\n <delete-message>" "Gmail archive message" macro index,pager d "<enter-command>set trash=\"imaps://imap.googlemail.com/[Gmail]/Bin\"\n <delete-message>" "Gmail delete message" macro index,pager gl "<change-folder>" macro index,pager gi "<change-folder>=INBOX<enter>" "Go to inbox" macro index,pager ga "<change-folder>=[Gmail]/All Mail<enter>" "Go to all mail" macro index,pager gs "<change-folder>=[Gmail]/Starred<enter>" "Go to starred messages" macro index,pager gd "<change-folder>=[Gmail]/Drafts<enter>" "Go to drafts" macro index,pager gt "<change-folder>=[Gmail]/Sent Mail<enter>" "Go to sent mail" #Don't prompt on exit set quit=yes ## ================= #Color definitions ## ================= set pgp_autosign

    Read the article

  • Interaction between two Clouds

    - by Snehal Masne
    I have setup the Cloud-A with 1 - [CLC+CC] and 2 - [NC] computers. I have another Cloud-B with same configuration. [using the Ubuntu Enterprise Cloud] Both of them working fine individually, in the same LAN. Now if I want to add the NC of Cloud-A to CC of Cloud-B, [in case the resources of Cloud-B are exhausted] how can I make it possible ? I guess this calls for the interoperability stuff... Could you please explain what happens exactly when we ask for instance, the direct interaction happens between the client and NC or it goes through the CLC and CC ? What I want to say is, say there are multiple cloud providers. A user is subscribed to any one of them, say Cloud-A for IaaS. As the requirements are dynamic, all the resources of Cloud-A may get exhausted. There may be another Cloud-B which can provide the services but that Cloud-A can't ask the client to go for Cloud-B. So if it is possible to have some co-ordination between this two providers to share resources mutually, making client fully unaware of whats going on in the background....? Please reply.. I am sorry if I'm doing mistake anywhere... Thanks in advance :) Regards, www.TechProceed.com

    Read the article

  • How can I use HAproxy with SSL and get X-Forwarded-For headers AND tell PHP that SSL is in use?

    - by Josh
    I have the following setup: (internet) ---> [ pfSense Box ] /-> [ Apache / PHP server ] [running HAproxy] --+--> [ Apache / PHP server ] +--> [ Apache / PHP server ] \-> [ Apache / PHP server ] For HTTP requests this works great, requests are distributed to my Apache servers just fine. For SSL requests, I had HAproxy distributing the requests using TCP load balancing, and it worked however since HAproxy didn't act as a proxy, it didn't add the X-Forwarded-For HTTP header, and the Apache / PHP servers didn't know the client's real IP address. So, I added stunnel in front of HAproxy, reading that stunnel could add the X-Forwarded-For HTTP header. However, the package which I could install into pfSense does not add this header... also, this apparently kills my ability to use KeepAlive requests, which I would really like to keep. But the biggest issue which killed that idea was that stunnel converted the HTTPS requests into plain HTTP requests, so PHP didn't know that SSL was enabled and tried to redirect to the SSL site. How can I use HAproxy to load balance across a number of SSL servers, allowing those servers to both know the client's IP address and know that SSL is in use? And if possible, how can I do it on my pfSense server? Or should I drop all this and just use nginx?

    Read the article

  • Weird Apache behaviour and with files again

    - by afifio
    Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

    Read the article

  • Linux NFS create mask and force user equivalent

    - by Mike
    I have two Linux servers: fileserver Debian 5.0.3 (2.6.26-2-686) Samba version 3.4.2 apache Ubuntu 10.04 LTS (2.6.32-23-generic) Apache 2.2.14 I have a number of Samba shares on fileserver so that I can access files from Windows PCs. I am also exporting /data/www-data to the apache server, where I have it mounted as /var/www. The setup is okay, except for when I come to create files on the NFS mount. I end up with files that cannot be read by Apache, or which cannot be modified by other users on my system. With Samba, I can specify force user, force group, create mask and directory mask, and this ensures that all files are created with suitable permissions for my Apache web server. I can't find a way to do this with NFS. Is there a way to force permissions and ownership with NFS - am I missing something obvious? Although I've spent quite a bit of time with Linux, and am weaning myself off Windows, I still haven't quite got to grip with Linux permissions... If this is not the right way to do things, I am open to alternative suggestions.

    Read the article

  • On clients use generic driver for printer shared by CUPS

    - by Daniel
    I know this worked really easy with a recent CUPS version some years ago. Unfortunately I fail to do the following with latest CUPS nowadays. How to share a printer without using printer specific drivers on the clients with CUPS? The printer is a Samsung ML-2010. The important fact is that it needs a quite specific library for printing called splix. That is installed on the server and prints well. What makes trouble is using that printer over the network. I found out how to use Avahi under Linux to make use of DNSSD to advertise and discover printers. But as far as I understand the new CUPS offers the internal driver interface on the network. This has 2 major issues: anybody can fiddle with the driver and I don't trust any uncommon printer library to be "network secure" anyone who wants to use my printer including guests needs to install the specific drivers first I remember the old days when I could enable "Share this printer" on the CUPS server and all clients would magically detect the printer and just send their job data to the server and have it do the driver stuff. After everything a read I guess this is related to the changes Apple introduced with CUPS including dropping of the integrated network discovery protocol. If it helps: Server: Ubuntu LTS 12.04 Server with CUPS 1.5.3 Client: Arch Linux with current CUPS 1.6.1 On another box with Ubuntu the printer was setup automatically at least but the mechanism used the Splix library for that.

    Read the article

  • xen + debian network after upgrade squeeze to wheeze

    - by rush
    I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

    Read the article

  • Puzzling TCP performance over 3G / UMTS

    - by lemonsqueeze
    I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

    Read the article

  • Advertise a subnet route with radvd

    - by Thomas Berger
    we have set up a small IPv6 Testing network. The setup looks like this: ::/0 +----------+ | Firewall | Router to the public net +----------+ | 2001:...::/106 | +----------+ +-------| SIT GW | sit Tunnel gatway to the some test users | +----------+ | +----------+ | Test Sys | Testsystem +----------+ The idea is to advertise the default route from the firewall and the route for the SIT subnets from the sit gateway. The configurations for radvd are: # Firewall interface eth0 { AdvSendAdvert on; route ::/0 { }; }; # SIT Gatway interface eth0 { AdvSendAdvert on; route 2001:...::/106 { }; }; We have captured the adv. packages with tcpdump and the packages looks good. We see a default route from the fw, and the subnet route from the SIT gatway. But if we look on the testsystem there are two default routes over both gateways. There is no subnet route. The routing does not work of course. Here the routes we get: 2001:.....::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::baac:6fff:fe8e:XXXX dev eth0 proto kernel metric 1024 expires 0sec mtu 1500 advmss 1440 hoplimit 64 default via fe80::e415:aeff:fe12:XXXX dev eth0 proto kernel metric 1024 expires 0sec mtu 1500 advmss 1440 hoplimit 64 Any Idea?

    Read the article

  • Access server using IP on another interface

    - by Markos
    I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

    Read the article

  • How can I configure Samba to share (read/write) any folder with root permissions?

    - by Mike Toews
    I have a CentOS 5 VirtualBox guest on a Win7x64 host. I am attempting to setup a read/write share a directory owned by root with my Windows host using Samba, but I'm having no luck after running around in circles. To simplify matters, I've disabled my Firewall (/etc/init.d/iptables stop). As security and permissions are irrelevant for this purpose, I'd rather not have to set up another unix user/group/password. Here is the output from testparm Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[Guest Share]" Loaded services file OK. Server role: ROLE_STANDALONE and the source of /etc/samba/smb.conf: [global] workgroup = WRKGRP netbios name = SMBSERVER security = SHARE load printers = No [Guest Share] comment = Guest access share path = /root/src read only = No guest ok = Yes Running /etc/init.d/smb restart shows an OK status. However, on my Windows host, I can only see the share folder on the guest \\IPv4, but I cannot go into "Guest Share": "The network name cannot be found" error message is a common error, with a likely cause: The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible. Am I trying to use root as a passwordless Samba guest? I'd like to, is it possible? How can I configure Samba to share (read/write) any folder with root permissions?

    Read the article

  • How do I repartition an SDHC card in Windows?

    - by Peter Mortensen
    How do I repartition an SDHC card (4 GB or more)? Do I need third-part tools or Linux (a live CD solution would be OK)? In Windows' Disk Management the option Delete Partition is dimmed out: I can reformat the card as FAT32, copy files to and from the card and even change the file system to NTFS using the command line command CONVERT, but not repartition it. The article How to Partition an SD Card in Windows XP talks about using "a Windows enabler program" which sound rather dubious to me. I have tried to change from “Optimize for quick removal” to “Optimize for performance”. The option to format as NTFS appeared, but the Delete Partition option is still dimmed out. Platform: Windows XP 64-bit SD card reader: USB 2.0 device, LogiLink® CR0005C Cardreader 3,5' USB 2.0 intern 54-in-1 mit USB Front Kingston 16 GB SDHC card, speed class 4. (It could be formatted as FAT32 and successfully used in a 4 GB ReadyBoost setup (Windows 7).) I have also tried on different versions of Windows and with different cards with the same result: Kingston 4 GB SDHC card, speed class 4 (the one shown in the screenshot) Transcend 2 GB (not marked as SDHC, but SD) Windows 7 32-bit (albeit with a somewhat an older card reader) and Windows XP 32-bit on an EliteBook 8730w

    Read the article

  • SSD for swap on Ubuntu server

    - by grs
    Currently I am reading SSD reviews and I wonder how much exactly I will benefit if I move the 24 GB swap from 7200rpm HDD to SSD. Does anyone implemented swap space on SSD? Is this generally good idea? On a side note: I read that ext4 has much better performance if the journal is on SSD. Anyone with such a setup? Thanks! Edit: Here I will answer the questions posted: Occasionally, relatively rare I am hitting the swap. I know what the swap is for and that is better to get more RAM. When the server begins to swap its performance degrades (not a surprise). The idea is if I have few memory hungry processes running, to improve the overall system performance at that time, using SSD for swap, instead of slower rotational media. At the end - I want to be able to login faster and check the server state during swapping, instead of waiting on the login prompt. And of what I see SSD is cheaper per GB than RAM. Would I have better server performance during swapping (as rare it is) using SSD compared to HDD? Where 10k or 15k rpm HDDs would rate in this scenario? Thank you all for your quick and prompt answers!

    Read the article

  • vSphere Promiscuous mode only receiving packets one way from network switch

    - by steve.lippert
    We have two network switches, a POE switch (SwitchA) to power our phones / users computers and a non-POE switch (SwitchB for the rest network.) Each switch is setup to do port mirroring to support our VoIP recording system. SwitchA does port mirroring on specific ports if we need to record a user. SwitchB mirrors one port to monitor our work at home users (Internet comes in from managed router, to switch, back out to our firewall.) These two port mirroring setups feed into one vmware vSphere 4.1 server, it has four total physical cards. The other two NICs feed into an unmanaged switch for connecting to the rest of the network. Once into the vSphere server all network ports go into a vSwitch, and then one of the servers (Windows 2008 R2) sniffs them out and does its thing. Everything is working fine and dandy from SwitchB. But on SwitchA we only receive one side of the VoIP packets (going out to the phone, nothing coming in from the phone). Troubleshooting steps I have taken so far: I hooked up my laptop to the monitor port on SwitchB and I see both sides of the packets. I swapped which network interface is plugged into the monitor port on SwitchA. Because everything feeds into one vSwitch / vNetwork and both sides of the conversation arrive just fine from SwitchB I believe everything is configured correctly on the vSphere server/guest. What could be causing one way packets to arrive on my guest machine from only one interface, but not the other? Could a bad cable be causing the problems from SwitchB?

    Read the article

  • Nginx + WordPress + HHVM: Why isn't Batcache working? Would Varnish help even more?

    - by javipas
    I've heard great things about HHVM, so I've setup a copy of WordPress blog (on another domain) with Nginx (with the Pagespeed module) and HHVM. Right now the benefits are obvious: on the same config, load times are between two and three times faster. I'm trying to speed up things a little bit, and I've also installed Memcached and Batcache. I've installed the memcached package, copied object-cache.php (Pastebin) onto the root folder of the WordPress blog, and after that I've installed the Batcache plugin and copied the advanced-cache.php (Pastebin) file onto the wp-content folder. Also, I've included the line define('WP_CACHE', true); in the wp-config.php file. It seems it doesn't work, though. If I quickly reload the page several times Batcache should show the cached page, but it doesn't. It's easy to check that by reloading (Cmd+R on Chrome on OS X) the page several times and then viewing the page's code. Under the <head> section I should see some batcache stats, but they aren't there. I wonder if someone could give me some hint on this. On a side note, I don't know if I could add some other component in order to help the performance be even better. I'm thing about Varnish, but I'm not sure if it's just useless and it's just another way to the same I'm currently doing. Any other component there? (I'll test CDN for images, minifying js, etc and some other tricks as well, but I'm talking from the server perspective).

    Read the article

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >