Search Results

Search found 46119 results on 1845 pages for 'ticket system'.

Page 499/1845 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed [migrated]

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Missing boot files in Windows 8

  - by Alex F. Sherman

  I had a partition with Windows 8 Release Preview, Windows' System Reserved partition and the empty space of the beginning of disk. I moved two partitions to the beginning of disk using Ubuntu Live CD and GParted. After that, the Windows Loader didn't boot and throw an error about missing files. I fixed it using the commands: bootsect /nt60 sys /force /mbr bootrec /rebuildbcd bootrec /fixboot bootrec /fixmbr When I used "Automatic repair" option from "Advanced boot" menu, it throw an error like: Windows can't fix your boot problems. For more information see file C:\Windows\System32\LogFiles\Srt\SrtTrail.txt In this file I found a description of the system repair actions and at the end of file: Boot status indicates that the OS booted successfully. Now, when I use the Advanced boot menu from Windows 8 (PC settings - General - Advanced startup) I receive an error: Restart your PC to try again. It looks like something didn't load correctly. Restarting might fix the problem. If this happens more than once, you might also be able to find help by searching online for the specific error code. Erorr code: 0x8007090. 0x80070490 is the error code ERROR_NOT_FOUND. What are the missing boot files and how can I restore them? List of files in System Reserved Partition: B:\bootmgr B:\BOOTNXT B:\Boot\BCD B:\Boot\BCD.LOG B:\Boot\BCD.LOG1 B:\Boot\BCD.LOG2 B:\Boot\BOOTSTAT.DAT B:\Boot\Fonts B:\Boot\memtest.exe B:\Boot\qps-ploc B:\Boot\Resources B:\Boot\Resources\bootres.dll and many *.mui and *.ttf files.

  Read the article

• Virtualized Screen Resolution

  - by Jim R

  I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04. The problem is that I would like to use a larger size display that is configured by default. Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080. This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation. The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file. I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily. Is what I want to do possible? If so, how do I accomplish it?

  Read the article

• My desktop has started overheating -- how hot is hot?

  - by Jerry

  I have a two year old desktop, some random quad core HP desktop. It used to run very quietly, but in the past month, the fans start up anytime anything "serious" is being done -- compiles, playing video, etc. Right now, speedfan and speccy report the cores are between 50C and 70C. Speedfan reports this as hot. (Nice flame icon.) Well, the system does sit on my carpet, so two weeks ago, I took off the lid, and cough *cough* it was pretty filled with dust. I got out an air can, turned on a vacuum and carefully got out all the dust that I saw on the CPU fan the case fans any fan I saw (graphics board) and blew out all the dust I could from all the circuit boards. And then I closed the case back up. It has definitely run cooler since then, but it still runs hot, and I hear high speed fan noise I never heard before. How hot is too hot? At what temps do consumer grade CPUs die? What should I be looking to do? Replace CPU fan? (It seems to work) Replace power supply fan? Assuming the dust problem is gone, where should I be looking to determine why the machine is heating up? Epilogue: After following the various pieces of advice given here, the system did run cooler, but it was still noticeably running louder (hotter) than just a few months prior. I ended up purchasing a new cpu heatsink and fan and during installation found the cooling grease from the original heatsink was just a dried, cracked layer, probably more of an insulator than heat transfer agent. With the new fan AND the new heatsink compound, the system ran much much cooler and the fan rarely turns on.

  Read the article

• Fix MBR from installed Windows Vista

  - by Danilo

  Hi guys, I have a quite strange problem. I had a system with Vista and Ubuntu installed. We always use Vista and Ubuntu was something we really did not need. BUT: to boot, GRUB was used (I guess grub2). Now, while being in Vista I cancelled the Ubuntu partition and with it also GRUB. Now the system does not boot anymore. I tried to reinstall Ubuntu, but I had some problems with the CD. At the moment, when the system boots I get into the GRUB shell. From there, I am able to boot Windows Vista with some commands like this ones: grub> title windows rootnoverify (hd0,msdos3) chainloader +1 boot Now the question is: if I am able to boot in Windows Vista with this trick, is it possible to fix the MBR from inside the installed windows Vista with some command/tool of Vista itself? I shall probably mention that we are not interested in double boot at the moment. We only want Vista to start. I can sum up the question like this: is there a way to fix the MBR from the installed version on Windows Vista, considering that GRUB is at the moment installed? I hope I was clear enough. Thanks for your help.

  Read the article

• How do I repair a Windows 7 installation damaged by Windows 8 sleep mode

  - by Mat

  I'm experimenting with a Windows 8 installation which is on a separate SSD. My actual Windows 7 installation I'm working with is on my old HDD. While Windows 8 was in sleep mode I swapped the hard disks and put in the Windows 7 HDD (I thought the computer was off). When I started the computer, Windows 8 started back up to the login screen – then it was stuck and some seconds later the computer rebooted. Now the Windows 7 Installation is damaged. When I boot, after the Windows 7 startup logo appears, a bluescreen shows up for few seconds stating: STOP: c000021a {Fatal System Error} The verification of KnownDLL failed. System process terminated unexpectedly with a status of 0xc000012f (0x00f0bb90 0x00000000). The system has been shut down. and then the computer reboots. The same happens in safe mode. 'Windows startup repair' cannot repair the issue. Any idea what could have happened exactly and/or how to repair this Windows 7 Installation?

  Read the article

• Cisco Catalyst 4500 Policy Based Routing

  - by Logan

  In order to test a new firewall I just set up I'm trying to implement policy based routing on our core switch. I want traffic from certain vlans to be routed to the new firewall while everything else continues being routed through the old firewall. I was trying to use this guide. Everything from that guide works fine except trying to run the "ip policy route-map" command in the interface configuration mode. IOS is telling me that such a command doesn't exist. A "show ip interface vlan" command says that policy routing is disabled. Any ideas? Output of "show ver": Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(53)SG, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Thu 16-Jul-09 19:49 by prod_rel_team Image text-base: 0x10000000, data-base: 0x11D1E3CC ROM: 12.2(31r)SG2 Dagobah Revision 226, Swamp Revision 34 RTTMCB2223-1 uptime is 3 years, 22 weeks, 2 days, 19 hours, 28 minutes Uptime for this control processor is 51 weeks, 2 days, 18 hours, 2 minutes System returned to ROM by power-on System restarted at 19:22:02 UTC Tue Jul 12 2011 System image file is "bootflash:cat4500-ipbasek9-mz.122-53.sg.bin" ... cisco WS-C4510R (MPC8245) processor (revision 4) with 524288K bytes of memory. Processor board ID FOX103703W3 MPC8245 CPU at 400Mhz, Supervisor V Last reset from PowerUp 42 Virtual Ethernet interfaces 244 Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2

  Read the article

• Extend RAID 1 (HP SmartArray P410i) running Linux

  - by Oliver

  I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) (sn: removed) array A (SAS, Unused Space: 1335535 MB) logicaldrive 1 (279.4 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1 TB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1 TB, OK) Initially there were two 300GB disks that got replaced by 1TB disks and I now have to extend the logical volume to use that extra space. However, when trying to do so I get the following warning: => ctrl slot=0 ld 1 modify size=max Warning: Extension may not be supported on certain operating systems. Performing extension on these operating systems can cause data to become inaccessible. See ACU documentation for details. Continue? (y/n) Is it safe to say yes or am I at risk of corrupting the file system / loosing data? Rearranging and extending the file system afterwards shouldn't be an issue as I can take the server offline and boot from a gparted live disk. Here's the config of the RAID controller in use: => ctrl all show detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: removed RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: Rev C Firmware Version: 5.12 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: False Drive Write Cache: Disabled SATA NCQ Supported: True And the partition table: Number Start End Size Type File system Flags 1 1049kB 274GB 274GB primary ext4 boot 2 274GB 300GB 25.8GB extended 5 274GB 300GB 25.8GB logical linux-swap(v1)

  Read the article

• Problems mounting HPUX LVM+VXFS filesystem on Linux

  - by golimar

  I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

  Read the article

• gentoo zlib removed = portage corrupted

  - by Shamanu4

  Hello I'm using gentoo not for a long time and have made such mistake: I've removed zlib package from system. Now i've got my portage system corrupted: # emerge --sync Traceback (most recent call last): File "/usr/bin/emerge", line 36, in <module> from _emerge.main import emerge_main File "/usr/lib64/portage/pym/_emerge/main.py", line 41, in <module> from _emerge.actions import action_config, action_sync, action_metadata, \ File "/usr/lib64/portage/pym/_emerge/actions.py", line 44, in <module> from _emerge.depgraph import backtrack_depgraph, depgraph, resume_depgraph File "/usr/lib64/portage/pym/_emerge/depgraph.py", line 40, in <module> from _emerge.FakeVartree import FakeVartree File "/usr/lib64/portage/pym/_emerge/FakeVartree.py", line 11, in <module> from portage.dbapi.vartree import vartree File "/usr/lib64/portage/pym/portage/dbapi/vartree.py", line 56, in <module> import re, shutil, stat, errno, copy, subprocess File "/usr/lib64/python2.6/subprocess.py", line 430, in <module> import pickle File "/usr/lib64/python2.6/pickle.py", line 1258, in <module> import binascii as _binascii ImportError: libz.so.1: cannot open shared object file: No such file or directory How can I reinstall zlip package and repair system?

  Read the article

• Best photo management software?

  - by Niels Basjes

  Hi, What I would like is a single piece of software (or a smart combination of tools) that allow me to manage my photos in a better way than what I've found so far. 1. Tags Primarily I need a way of tagging the images. So I can manually tag photos the same way we tag questions here at SO/SF/SU. I want this software to place a lot of the tags automagically (obvious things like date and resolution). 2. Face recognition What I would really like is that this software has a feature that it can recognize faces in images and places tags with the name of the person. So far I've only heard of one online photo system that can do that (Picasa) and not yet of any offline tool. 3. Version database I must have some way of having a central GIT/SVN/... that contains all images. I have had a harddrive corruption a few years ago and it took me a long time to figure out which images had been damaged. I always want to be able to go back to what the camera produced. 4. Website I want to be able to generate a website (few 'tag' specific websites) based on the actual content. 5. Easy bulk uploading Many photo tools have a one on one uploading option. I prefer simply 'throwing' my images on a file server under Linux (Samba) and let the system automagically integrate, tag, recognize, etc. all images. Ok, I know these are a bit much. Perhaps you guy's have some suggestions about existing tools that can make this possible. Or even a complete system that does this. EDIT: To clarify on the OS. I prefer Linux for any 'server' task and Windows XP for any 'desktop' task. Thanks for all your input. Niels Basjes

  Read the article

• Diagnosing a BSOD involving USB

  - by David Ebbo

  [Running Win7 Ultimate 64 bit] My new HP Pavilion Elite HPE-450t has been plagued by BSDO crashes since I got it about 5 weeks ago. The crashes are somewhat rare, sometimes not occurring for 3 or 4 days. I have spent a lot of time trying to isolate the device that could be at fault, but I have seen crashes with only the keyboard and mouse plugged in (as USB devices), and I tried two sets of keyboard/mouse, so I'm running out of ideas. :( The WhoCrashed tool gave this info about my latest BSOD: crash dump file: C:\Windows\Minidump\121310-11887-01.dmp This was probably caused by the following module: usbport.sys (USBPORT+0x2DE4E) Bugcheck code: 0xFE (0x5, 0xFFFFFA8008F571A0, 0x80863B34, 0xFFFFFA80092F2510) Error: BUGCODE_USB_DRIVER file path: C:\Windows\system32\drivers\usbport.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: USB 1.1 & 2.0 Port Driver Bug check description: This indicates that an error has occurred in a Universal Serial Bus (USB) driver. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. I looked at http://msdn.microsoft.com/en-us/library/ff560407(VS.85).aspx, and for Parameter1 = 0x5, it says "A hardware failure has occurred due to a bad physical address found in a hardware data structure. This is not due to a driver bug". Should I conclude that it's a hardware issue in the machine itself, rather than a bad USB driver or USB device? Here is the MiniDump, in case someone can get more info out of it: http://ewt52q.blu.livefilestore.com/y1peS4Ce8nSK1SXghzMDoxDWXlaEu-EKCJsv25y8y5DXXIUzZ9U0_tYgFJXd939fykwa0zRmx98IW0PYG18GioqKAuARYjtspSA/121310-11887-01.dmp?download&psid=2

  Read the article

• Firefox crash on first load on Ubuntu Linux on Windows Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

  Read the article

• Mac OS X Lion (10.7) Drive Encryption

  - by Skoota

  My iMac has two drives (a 256 GB solid-state drive, and regular 2 TB hard drive). The Mac OS X Lion system is installed on the solid-state drive and, like many other users, I have moved my user profile folder onto the secondary 2 TB drive. However, as you may be aware, FileVault 2 on Mac OS X Lion (10.7) only encrypts the system drive. This leaves my data drive (containing my user profile folder, with all of my data) unencrypted. I am aware that work arounds for this issue exist (such as https://github.com/jridgewell/Unlock) but I am not happy with the results since they involve decrypting the data drive on startup using a LaunchDaemon (before any users have logged into the computer) essentially meaning that any user who logs onto the computer will see the unencrypted drive. I would like a method which will only unencrypted the data when an authorised user logs into the computer. As such, is there a way to do one of the following? Encrypt the entire data drive and only decrypt the drive when an authorised user logs into the computer. This would be equivalent behaviour to the Lion FileVault 2 feature, but on a secondary drive rather than the system drive. Encrypt only the user profile folder on the data drive, and only decrypt the folder when the user logs into the computer. This would be equivalent to the behaviour of FileVault 1 on previous versions of Mac OS X? I am happy to pay for a commercial third-party product that provides the required feature(s), but I have not yet been able to find one. Thanks in advance for any assistance.

  Read the article

• Keep Windows Installer from using largest drive for temporary files

  - by stefan.at.wpf

  By default Windows Installer uses the largest drive for temporary storage, no matter if that's needed (meaning there would also be enough space on the system drive). Taken from http://msdn.microsoft.com/en-us/library/aa371372%28VS.85%29.aspx: During an administrative installation the installer sets ROOTDRIVE to the first connected network drive it finds that can be written to. If it is not an administrative installation, or if the installer can find no network drives, the installer sets ROOTDRIVE to the local drive that can be written to having the most free space. Now my system drive is an SSD, my largest drive is a RAID, that spins down when it's not used. Remember the SSD as system drive? Everything is silent now! Until I install something and Windows Installer wakes up my RAID again just to put a small .tmp file on it... How can I prevent Windows Installer from using the largest drive as temporary storage? Can I maybe set some access rights to disallow the Windows Installer to write on my RAID drive? Any other ideas? Thank you!

  Read the article

• Update Grub on Squeeze - Kernel downgrade due VMware Server

  - by vodoo_boot

  Hi! I happen to run into various problems regarding grub and kernels. I don't really care about the kernel internas. All I want is VMware server in that dedicated root-server. 1.) What is a bzImage vs. vmlinuz? kaze:~# ls /boot/ System.map-2.6.32-5-amd64 bzImage-2.6.33.2 config-2.6.33.2 initrd.img-2.6.32-5-amd64 System.map-2.6.33.2 bzImage-2.6.35.6 config-2.6.35.6 vmlinuz-2.6.32-5-amd64 System.map-2.6.35.6 config-2.6.32-5-amd64 grub I updated my menu.lst (grub2): timeout 5 default 0 fallback 1 title 2.6.32.5 kernel (hd0,1)/boot/vmlinuz-2.6.32-5-amd64 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.35.6 kernel (hd0,1)/boot//bzImage-2.6.35.6 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.32.3 kernel (hd0,1)/boot//bzImage-2.6.33.2 root=/dev/sda2 panic=60 noapic acpi=off That doesn't do well... I think the vmlinuz file is missing initrd or so. Dunno. In fact I don't give too much about kernel boot voodoo as long as it works. update-grub(2) does not work. Does anybody know what magical trick there is to get the 2.6.32-5 booting? 2.) I thought t follow the Deban wiki.. I cannot get header-files for the installed 35.6 or 33.2 kernel in the repositories. I cannot build foreign headers because they will not match the running kernel. So how does one deal with that situtation? I'd prefer not to have to downgrade the kernel. Thanks for any answers!

  Read the article

• Firefox crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

  Read the article

• How do I install git/git-svn on RHEL5 with a custom perl install?

  - by kbosak

  I've had nothing but trouble trying to install Git on RHEL5. First I tried from source, but ran into several issues with installing the docs. There appeared to be missing libs and such for parsing xml that I couldn't figure out how to get installed and recognized. Then I tried using the EPEL yum repository and was able to install git and its docs but now git-svn is not working. It complains about not finding the perl modules Git.pm and SVN/Core.pm. When I set the GITPERLLIB environment variable to the location of those libs it seg faults. Some background: RHEL5 came with perl 5.8.8, but we wanted to use 5.10 so I installed that from source (to a custom location). Someone then symlinked the system perl binary to this newer version of Perl to make sure nobody uses the wrong version. Each developer also has their own build of Perl. So I'm wondering what's the best way to install Git on this system and have both the docs and git-svn working correctly for each user. Unfortunately I'm a developer and not as good with system administration so take it easy on me.

  Read the article

• My New Dell Workstation T-7500 gives electric shock

  - by Dan

  Just bought Dell T-7500 Workstation. When installation technician came to Install the workstation, he got an electric shock when he touched the Start Button. He also got shock when he touched Front Panel. No shock when touching rest of the Chassis. He called Dell Support & tried to troubleshoot by taking out various wires etc but did not help. I touched the same places & I also got shock. We checked everything possible including connecting to various outlets but it didn't solve the problem. Installation subcontractor said that they are not supposed to troubleshoot anything on new system, just install it & they made notes & left. I called my sales guy & it was weekend so he said he will take care of it on Monday. Here are my concerns : (1) Why does that happen ? Although it is a mild shock & it won't kill you but might damage other parts of workstation ? (2) Is this common for workstations ? (3) What should I do ? Of course Dell will try to troubleshoot again but should I let them do that OR ask for a New System ? (4) Wheat would happen if I continue using it till the new system arrives ? Thank You.

  Read the article

• Network tools not working with a 3G connection

  - by gAMBOOKa

  Some of my network tools stopped working after I switched to a 3G connection from a DSL one. Cain and Abel's sniffer, Metasploit, even the NMAP scanner. I'm using Windows 7. The 3G device in question is the Huawei E180. Here's the error I get when running NMAP WARNING: Using raw sockets because ppp2 is not an ethernet device. This probably won't work on Windows. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: The system cannot find the device specified. (20). Will wait 5 seconds then retry. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: The system cannot find the device specified. (20). Will wait 25 seconds then retry. Call to pcap_open_live(ppp2, 100, 0, 2) failed three times. Reported error: Error opening adapter: The system cannot find the device specified. (20) Metasploit's refused connection to my websites too.

  Read the article

• Mysql master-master not replicating

  - by frankil

  I'm setting up a master-master mysql replication on two servers (db1 and db2). I started with setting up db2 as a slave to db1 and that works fine. But when I set up db1 as a slave to db2 it isn't replicating. On the face of it everything looks fine but the data isn't replicating. There are no errors in either of the error logs. The slave status is updating the bin log position. I have used mysqlbinlog to examine both the binlog on the db2 and the relay log on db1 and all of the queries are going in there, but not being executed to db1. "show slave status" on both servers shows that both the slave io and sql threads are "Yes" and that the relay log position is updated by the sql thread. Also on both servers: >echo "show processlist" | mysql | grep "system user" 166819 system user NULL Connect 3655 Waiting for master to send event NULL 166820 system user NULL Connect 3507 Has read all relay log; waiting for the slave I/O thread to update it NULL Relevant config for db1: server-id = 1 log-slave-updates replicate-same-server-id = 0 auto_increment_increment = 4 auto_increment_offset = 1 master-host = db2 master-port = 3306 master-user = slaveuser master-password = *** skip-slave-start sync_binlog = 1 binlog-ignore-db=mysql Config for db2 server-id = 2 log-slave-updates replicate-same-server-id = 0 auto_increment_increment = 4 auto_increment_offset = 2 master-host = db1 master-port = 3306 master-user = slaveuser master-password = *** sync_binlog = 1 relay-log=mysql-relay-bin binlog-ignore-db=mysql What else can I look for to make sure db1 executes the queries from db2?

  Read the article

• NetInstall working on some systems, not working on others

  - by cduruk

  Hi, I'm having an issue where my NetInstall setup works on some computers and fails on others. I am not able to diagnose the issue. I created an image of a Mac Mini and then created a NetRestore image using the System Image Utility found on Snow Leopard Server. NetBoot and NFS all seem to be working fine on the server, which is an XServe. Then I select the NetInstall image from the Startup Disk on a machine. On some of the machines, the process works as expected. On some of them, I see the globe icon blink a few times and then the system boots to the regular hard drive. I have captured the tracedump and the system.log logs from the server on both cases where NetInstall seems to work and fail. Here is the link that has all the logs http://gist.github.com/232232 The gist of the failure seems to be from the lack of BSDP DISCOVER in the failure but I'm not able to identify why that exactly is happening. I'd really appreciate any help on this issue.

  Read the article

• Disc drive busy on MacBook, with disc stuck inside.

  - by ayaz

  I have a white MacBook, running Snow Leopard, 10.6.3 with the latest updates. I popped in a DVD that the system failed to mount. I did not see any conspicuous errors. As a result of this failure, the DVD got stuck in the drive. Neither pressing the eject button on the keyboard nor running the diskutil eject command caused the DVD to come out. The commands drutil eject and drutil tray open could not get the DVD to budge at all. The 'mount' and 'eject' buttons on the window for Disk Utility are dimmed out, while it is written in the middle for the DVD drive that that particular disc drive is busy. This is not the first time this has happened with me. I know that I will ultimately have to resort to rebooting the system and holding down the eject button to get the DVD to come out. But, is there any workaround that does not involve rebooting the system and prying the disc out? The drive on this MacBook does not have a needle-pin reset button -- at least, I couldn't find it anywhere. Any help will be greatly appreciated. Many thanks.

  Read the article

• Automate creation of Windows startup script?

  - by Niten

  Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, or otherwise (even COM or Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

  Read the article

• Backing up server and multiple clients

  - by inquam

  I'm running a Amahi server. It's basically a Fedora14 x64 installation. I'm looking for a good solution to backup my 200GB system drive on the server to an external USB/eSATA drive every night. I looked into using dd but since other things might be running on the server at the same time it didn't feel quite safe. I would like the backups to be incremental so the following backups after the initial one would be quite fast. The backup should also be bootable or prehaps be able to produce a bootable disk after booting from a CD or something. I would also like the server to be able to do similar backups of my clients running Ubuntu, Windows 7 x64, Windows 7 Starter, OSX Lion, Windows XP and so on. So no applications backing up only shared folders or something like that. My guess is a client daemon would have to exist that would lock the system to allow backup of a Windows system drive that can otherwise be quite cranky. Booting up a CD in a crashed client and connecting to the server restoring the latest backup and being up running is my ideal goal. Is there anything out there that would fit these needs?

  Read the article

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >