Search Results

Search found 115 results on 5 pages for 'belkin'.

Page 5/5 | < Previous Page | 1 2 3 4 5 

  • 802.11g -> wired ethernet bridging not working

    - by Malachi
    Usually people want to go the other direction, but I want to take our relatively fast and stable house 802.11g signal and bridge it to ethernet. I have tried using an Airport Express (the b/g flavor) and my i7 MacBook pro, both to no avail. Word is that the b/g flavor of This flavor of Airport Express maxes at firmware 6.3 which doesn't support this kind of bridging properly. However, I expected my MacBook pro to do the job with its "Internet Sharing" feature. Alas, although my wired PC does sort of see it, it doesn't work out. Strangely, using DHCP the PC receives the same IP address as my MBP uses on the network. Less strangely, but still surprisingly, the wired ethernet port on my mac registers as the IP address of the gateway when queried with IFCONFIG. It sort of makes sense that the mac would "pretend" to be the gateway, but the whole thing just isn't working and seems configured wrong - but all the docs I see say basically "OS X Internet Sharing: click it and go". What do I do? Do i really have to buy more hardware, even though I have plenty of would-be candidates for bridging? Incidentally, the host router originating the 802.11g signal is a belkin 802.11g router, and is documented to support WDS.

    Read the article

  • Why can't I connect to my router's config page with Windows 7?

    - by user17940
    I've got a Belkin wireless router, and just bought a new Dell computer with Windows 7 pre-installed. I can connect to the Internet and my home network just fine, but when I try to visit my router's configuration page at http://192.168.2.1, I get a "Connection was reset" error. Nothing I do will make the router's configuration page come up in my web browser. More background information: I could always get to the router's config page from my Windows XP machine. I never had any trouble prior to getting this Windows 7 computer. I can ping 192.168.2.1 successfully from my Windows 7 computer. My PC is connected to the router by a physical CAT5 cable, not via wireless. Every device connected to my router, including the new computer, can get to the Internet with no problem. Here are some things that did not solve the problem: I tried turning off IPV6 in Windows. I tried turning off my firewall and antivirus software I tried using https instead of http I tried disabling and then enabling the network connection in Windows I tried reverting my network card driver back to an older version I have tried both Firefox and Internet Explorer web browsers. Has anyone experienced something like this before, and solved it? Thanks a lot for your help!

    Read the article

  • Internet Troubles - PPPoE vs PPPoA?

    - by AkkA
    I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

    Read the article

  • Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

    - by tonyrogerson
    This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

    Read the article

  • OS X Snow Leopard 10.6 Refuses to Load Websites the first time intermittently

    - by Brandon
    Many times when I am browsing the web, Snow Leopard will sit and load a site for 20 seconds or more, until it times out and says it cannot be displayed. If I refresh, it loads RIGHT away, every time. The issue is intermittent but happens from once every couple of days to a few times a day. So the long and short of it is this: Aluminum MacBook (Non-Pro) 2.4GHz Core2Duo, 4GB DDR3 I am using 10.6.6 but I have had this issue since 10.6.0 It happens in Firefox, Chrome, and Safari I have flushed my DNS (using the command 'blablabla flush') I am using custom DNS servers which I hoped would fix it but it had no effect* I am running Apache currently but haven't been for most of the time I've reformatted multiple times, always experiencing the issue I am on Cox cable internet, with a Motorola Surfboard & a Belkin F6D4230-4 v1 (Pre?) N wireless router. I've put the router in G only & N only & G+N to no effect It seems to be domain dependant as I can sometimes load the Google cache right away, and sometimes other sites will load but Google will refuse My Powerbook G4 with Leopard, other Windows XP laptops, & my wired Win7 desktop do not suffer from the issue. *I recently started using these to escape the awful Cox redirect page on timeouts I'm almost positive the issue has happened on other networks but I can't recall a specific instance (I have a terrible memory). The problem is intermittent and fixable enough (I just have to wait until it times out and hit refresh one time) but incredibly annoying since I'm constantly reading documentation from a large variety of sites. EDIT: To clarify, this happens with ALL sites, not only specific sites. I haven't been able to detect any pattern to the failures, but one day Google.com will refuse to load while reddit.com will, and the next day vice versa. Keep in mind that waiting for a timeout and hitting refresh loads the page right away, every time. If I don't wait for the timeout, opening more links, hitting refresh, and clicking the link a billion times have no effect. It seems to be domain neutral, affecting sites seemingly at random. It doesn't seem to have anything to do with connection inactivity either, because I will be SSHed into different servers, uploading files, browsing, downloading, etc, and it will just quit loading Jquery.com (for example) until I sit and wait for a timeout. /EDIT This is my last resort. Please, someone, tell me what is happening. Thank you.

    Read the article

  • How can I connect DLNA devices through NAT?

    - by Bob
    I have a Windows 7 PC running Serviio as a DLNA server. I have a Samsung I9100G running Skifta as a DLNA renderer (client). My network topology: At the moment, I can connect and watch my videos fine if the phone is on router #2. The server is on a wired network with #2. Router #1 is 192.168.1.1, router #2 is 192.168.2.1 (192.168.1.2) and router #3 is 192.168.3.1 (192.168.1.3). In other words, each router has its own subnet, using NAT - their "modem" port is connected with a "LAN" port on the modem/router 1. What I want to do is be able to connect to the DLNA server if the renderer is connected to router #1/#3 - #1 is on the WAN side of #2, while #3 is even further separated. I'll settle for just #1 working, though. Normally, I would just forward the appropriate ports, and everything would work fine. However, (apparently) DLNA uses UPnP, which I am unfamiliar with. I tried enabling UPnP on router #2, but that did not seem not change anything. It's a Belkin F5D7230-4 6000 - there's reported issues with UPnP on F5D7230-4 7000. UPnP is already enabled on router #1 - a Billion BiPAC 7700N. I've also tried the built in DLNA renderer/server/controller on my phone, Samsung AllShare. It can see the server on router #2 and browse files, but has issues playing or downloading them. It also can't see the server on the other two networks. I'm currently using Skifta/s "local" mode. "Remote" mode requires an account, which I don't really want to create if not necessary. Is it possible too do what I'm trying to do? If no, are there workarounds? If yes, how do I do it? Is my server the issue? The renderer (client)? The router(s)? My method? I can change just about anything except the routers.

    Read the article

  • Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

    - by zchads
    Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

    Read the article

  • Troubleshooting an unstable internet connection

    - by Konrad Rudolph
    My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

    Read the article

  • MBPro, mid 2010 can't see Dlink DIR655 signal after sleep etc

    - by user88114
    This is my son's MBP 7,1 running Snow Leopard 10.6.7. Router signal is fine since iPad, Wintel on same table 20 feet from router are fine. the MBP however frequently wakes and fails to find the internet. iStumbler can see 1 neighbours hub and my garden hub are there but can't get to the normal DIR655 wifi... no ping no en0 or en1 device seems to exist. Airport off and on does not help. He just resets router and it all works but this does not please me! I must admit the winter sometimes seems to loose connect too, but less so. The DIR655 (hardware rev A3) is on the original EU firmware 1.10, I'm cautious about jumping to latest 1.31EU since no downgrade seems to be possible and that feels a bit risky as so much is set up and working fine. If I use the DIR655 admin web and release the lease the MBP has then wake it all worked OK. So I suspect lease timing/locking issue but unsure how to check up, plus why iStumbler seems to say the network is not visible at all when I sit on the iPad right next to it just fine.. I do not think there are any channel overlaps and we also have RFquiet DECT phones (Orchid) that are silent until lifted or called. Anyway signals all show low interference and high throughput except for this failure to connect. Just walked the MBP to the garden office and iStumbler now sees the more distant DIR655 signal although it will not connect to it (does not show under Sys Prefs NetNetwork names) even after airport off & on... It also refuses to connect to my garden network (an old Belkin acting as AP wired to DIR655), the signal it can see and even net name in Sys Prefs NetNetwork names (2 mins later):NOW both names ARE visible, but both fail to accept the correct WPA2 password and keep asking again after failing to connect. IT ALL MAKES NO SENSE TO ME. Just revoked the lease for the MBP on DIR655 and no changes although this seemed to help MBP wake into connection 1 hour ago. OK a bit of walking about to report. Carried MBP across garden towards DIR655, a few other wifis show up on iStumbler, low signals all channel 1. Right next to DIR655 but iStumbler not showing it, although most other wifi's have gone. I'd say iStubler is suffering timeouts&hangs but hard to be sure. Lots of attempts to Airport on/off, join other etc and suddenly I get to connect, get given new IP (I revoked), can browse. Walk away, connection drops quite soon at 30 feet then reconnected briefly then died again. MUST ATTEND ELSEWHERE FOR A BIT...

    Read the article

  • Port forwarding using a BT Home Hub 2.0 (Supplied to new BT Infinity Customers in the UK)

    - by Jasarien
    I don't usually have trouble with port forwarding, I've been able to do it successfully on a number of different routers, including Linksys, Belkin, Netgear and Apple (Time Capsule / Airport Extreme). So I'm quite confused here. I had been using my Apple Time Capsule as my router for a few years now, with several port mappings all working fine. But it died recently, so I've had to resort to using the BT Home Hub 2.0 that was supplied with my BT Infinity broadband subscription. The forwarding interface for the Home Hub is simplified for the most part, allowing you to select an application or game and assign it to a particular computer on the network which you choose from a list that the Home Hub has 'discovered'. My Mac Pro has a manually assigned static IP 192.168.1.4 and my router is static at 192.168.1. I have chosen SSH from the list of applications and assigned it to my Mac Pro (the only computer in the list currently). The Home Hub also has a feature to keep a DNS service updated, and I have set it to keep my external IP address updated on my hostname. This is how I had it setup in the past with other routers and not had trouble before. I am able to ping my hostname (and external IP) from outside the network and get a response. But when I try to connect using SSH, the connection times out. The Home Hub also has "Firewall settings". The currently selected setting is: Default: Allow all outgoing connections and block all incoming traffic. Games and application sharing is allowed. But I've tried changing it to: Disabled: All traffic is allowed to pass through your BT Home Hub to your devices. Note: you’ll still need to use the games and application sharing feature to make sure that certain applications work properly. And the connection still times out... So frustrating. The OS X firewall on my Mac is disabled, so I don't think that's in the way. I have tried setting the port forwarding manually, instead of relying on the preset "SSH" option (incase it's not using the port I expect). So I set up my own "application" (as the Home Hub calls it) and forwarded external port 22 TCP to internal port 22 TCP to 192.168.1.4 - but that just gives the same result - unable to connect. Next, with the router's firewall disabled and OS X's firewall disabled, I ran the Shields Up test (https://www.grc.com/x/ne.dll?bh0bkyd2) and the result was that all my service ports (0 - 1055) are in 'Stealth' mode. I.e. nothing even exists at my IP as far as any outsider is concerned... Strange. The only thing that seems to work is setting my Mac Pro as the DMZ - which I don't want to do for obvious reasons. Any help with this would be extremely appreciated, thanks.

    Read the article

  • WiFi signal is lost every 3 minutes

    - by Software Monkey
    For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

    Read the article

  • What router hardware or software should be used when multiple public IPs are routed into the same LAN?

    - by lcbrevard
    I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

    Read the article

  • Unable to keep the connecting using a wireless bridge

    - by dan
    I am running Ubuntu 12.04 on a dell inspiron desktop (core 2 duo) and am using wicd to manage my network/wifi. I've found that the WiFi card in the machine has trouble staying connected to my router (I believe this is a function of distance between the two), so I've taken an old Belkin F5d7231 wireless router and installed dd-wrt on it to use as a wireless bridge hoping that it will have better reception. I think everything up through the wireless bridge is working OK since I have no problems accessing the internet through it with my MacBook. The problem arises when I try to hook the ubuntu machine up to the wireless bridge. It will connect for a few minutes, but it will quickly disconnect without clear triggering event; it may be more likely to disconnect if there is a heavy traffic load going over it (could be something as simple as "cat big_text_file" in an ssh session). I've tried switching from dhclient to dhcpcd without much improvement. Here is the output from the syslog when it connects: Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: exiting Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: exiting Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:10:08 Chicabuntu kernel: [15184.976127] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.010805] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: exiting Jun 30 17:10:08 Chicabuntu kernel: [15185.180156] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.212785] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:10 Chicabuntu kernel: [15187.027445] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:10:10 Chicabuntu kernel: [15187.027452] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:10:10 Chicabuntu kernel: [15187.028300] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: dhcpcd 3.2.3 starting Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: hardware address = 00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: DUID = 00:01:00:01:17:81:85:79:00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: broadcasting for a lease Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:10:20 Chicabuntu kernel: [15197.568016] eth0: no IPv6 routers present Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: offered 192.168.1.111 from 192.168.1.254 Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: checking 192.168.1.111 is available on attached networks Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: leased 192.168.1.111 for 86400 seconds Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding IP address 192.168.1.111/24 Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding default route via 192.168.1.254 metric 0 Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: exiting Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv4 for mDNS. Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Registering new address record for 192.168.1.111 on eth0.IPv4. Jun 30 17:10:30 Chicabuntu dhcpcd.sh: interface eth0 has been configured with new IP=192.168.1.111 Jun 30 17:10:39 Chicabuntu ntpdate[28439]: adjust time server 91.189.94.4 offset 0.001915 sec And here is the syslog from when it shuts down the connection without reason: Jun 30 17:12:15 Chicabuntu kernel: [15312.575455] tg3 0000:3f:00.0: eth0: Link is down Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: sending signal 1 to pid 28361 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: received SIGHUP, releasing lease Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: exiting Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for 192.168.1.111 on eth0. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv4 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing default route via 192.168.1.254 metric 0 Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: No such process Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing IP address 192.168.1.111/24 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: Cannot assign requested address Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: exiting Jun 30 17:12:16 Chicabuntu dhcpcd.sh: interface eth0 has been brought down Jun 30 17:12:17 Chicabuntu kernel: [15313.612141] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.644703] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: exiting Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: exiting Jun 30 17:12:17 Chicabuntu kernel: [15313.912147] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.944746] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:18 Chicabuntu kernel: [15315.592569] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:12:18 Chicabuntu kernel: [15315.592576] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:12:18 Chicabuntu kernel: [15315.593399] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:12:29 Chicabuntu kernel: [15325.680019] eth0: no IPv6 routers present If this isn't useful, I can also post the wicd log, but that is kind of long. If anyone could help me I would be eternally grateful.

    Read the article

  • Convert Console Output to Array

    - by theundertaker
    Using netsh wlan show networks mode=bssid on Windows CMD yields a listing of available wireless networks. Is it possible to convert the list, which looks something like this: Interface name : Wireless Network Connection There are 11 networks currently visible. SSID 1 : Custom Gifts Memphis Network type : Infrastructure Authentication : Open Encryption : WEP BSSID 1 : 00:24:93:0c:49:e0 Signal : 16% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 6 9 12 18 24 36 48 54 SSID 2 : airportthru Network type : Adhoc Authentication : Open Encryption : None BSSID 1 : 62:4c:fe:9c:08:18 Signal : 53% Radio type : 802.11g Channel : 10 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 3 : belkin.ffe Network type : Infrastructure Authentication : WPA2-Personal Encryption : CCMP BSSID 1 : 08:86:3b:9c:8f:fe Signal : 23% Radio type : 802.11n Channel : 1 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 4 : 3333 Network type : Infrastructure Authentication : WPA2-Personal Encryption : CCMP BSSID 1 : 00:0f:cc:6d:ba:ac Signal : 18% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 22 24 36 48 54 BSSID 2 : 06:02:6f:c3:06:27 Signal : 20% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 5 : linksys Network type : Infrastructure Authentication : Open Encryption : None BSSID 1 : 98:fc:11:69:35:46 Signal : 38% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 6 : iHub_0060350392e0 Network type : Infrastructure Authentication : WPA2-Personal Encryption : CCMP BSSID 1 : 00:c0:02:7d:5f:4e Signal : 18% Radio type : 802.11g Channel : 11 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 7 : TopFlight Network type : Infrastructure Authentication : WPA2-Personal Encryption : CCMP BSSID 1 : 00:14:6c:7a:c4:70 Signal : 16% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 8 : 2WIRE430 Network type : Infrastructure Authentication : WPA2-Personal Encryption : CCMP BSSID 1 : b8:e6:25:cb:56:a1 Signal : 16% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 9 : LUBIN Network type : Infrastructure Authentication : WPA-Personal Encryption : TKIP BSSID 1 : 00:13:10:8d:a7:32 Signal : 65% Radio type : 802.11g Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 10 : TV2 Network Network type : Infrastructure Authentication : WPA2-Personal Encryption : CCMP BSSID 1 : b8:c7:5d:07:6e:cf Signal : 79% Radio type : 802.11n Channel : 11 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 SSID 11 : guywork Network type : Infrastructure Authentication : Open Encryption : WEP BSSID 1 : 00:18:e7:cf:02:20 Signal : 15% Radio type : 802.11n Channel : 6 Basic rates (Mbps) : 1 2 5.5 11 Other rates (Mbps) : 6 9 12 18 24 36 48 54 ... into an array using JavaScript or C#? I know it is but it seems like it may be rather difficult. Are there other avenues of obtaining such network information in the requested format? A JavaScript object would be perfect.

    Read the article

  • Powershell Win32_NetworkAdapterConfiguration Not "seeing" PPP Adapter

    - by Ben
    I am trying to get the IP of a PPP VPN network connection, but Win32_NetworkAdapterConfiguration does not seem to "see" it. If I interrogate all adapters using my script, it will see everything but the PPP VPN adapter. Is there a specific filter or something I need to enable, or do I need a different class? My Script: $colItems = Get-wmiobject Win32_NetworkAdapterConfiguration foreach ($objItem in $colItems) { Write-Host Description: $objItem.Description Write-Host IP Address: $objItem.IPAddress Write-Host "" } Script Output: Description: WAN Miniport (SSTP) IP Address: Description: WAN Miniport (IKEv2) IP Address: Description: WAN Miniport (L2TP) IP Address: Description: WAN Miniport (PPTP) IP Address: Description: WAN Miniport (PPPOE) IP Address: Description: WAN Miniport (IPv6) IP Address: Description: WAN Miniport (Network Monitor) IP Address: Description: Intel(R) PRO/Wireless 3945ABG Network Connection IP Address: 192.168.2.5 Description: WAN Miniport (IP) IP Address: ipconfig /all output: PPP adapter My VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : My VPN Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.1.8.12(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 10.1.1.3 10.1.1.2 Primary WINS Server . . . . . . . : 10.1.1.2 Secondary WINS Server . . . . . . : 10.1.1.3 NetBIOS over Tcpip. . . . . . . . : Enabled Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Belkin Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-3F-3C-22-22-22 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.2.5(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 25 May 2010 20:33:19 Lease Expires . . . . . . . . . . : 22 May 2020 20:33:17 Default Gateway . . . . . . . . . : 192.168.2.1 DHCP Server . . . . . . . . . . . : 192.168.2.1 DNS Servers . . . . . . . . . . . : 192.168.2.1 NetBIOS over Tcpip. . . . . . . . : Enabled Thanks in advance, Ben

    Read the article

< Previous Page | 1 2 3 4 5