Search Results

Search found 709 results on 29 pages for 'ckm 88'.

Page 5/29 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Ubuntu 12.04 connected to wireless network but internet not working

  - by A.J.

  I can connect to my house's wireless network just fine, but when I'm connected I can't browse the web. Firefox starts connecting to a site and then just poops out. This doesn't happen on my roommates' computers (running Windows) or on our 3DSes, so I know it's just my laptop. I already tried sudo dhclient -r sudo dhclient sudo ifconfig eth0 down sudo ifconfig eth0 up Results of a few commands I was asked to run in comments: ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. ^C --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (173.194.33.38) 56(84) bytes of data. --- google.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1006ms nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 88:AE:1D:6B:4E:E7 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off - Device: wlan0 [JUSTICE] ----------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: connected Default: yes HW Address: 1C:65:9D:65:C6:31 Capabilities: Speed: 1 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) HOME-9B18: Infra, 00:26:F3:53:9B:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 34 WPA WPA2 cougdad48 Network: Infra, 60:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA2 cougdad48 Guest Network: Infra, 66:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA2 belkin.ade: Infra, 94:44:52:FF:8A:DE, Freq 2457 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 *JUSTICE: Infra, 00:24:01:7B:9F:7E, Freq 2462 MHz, Rate 54 Mb/s, Strength 88 WEP CenturyLink: Infra, B2:B2:DC:8E:E2:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 IPv4 Settings: Address: 192.168.0.11 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 (JUSTICE is my home's network.) ping -c 2 198.168.0.1 PING 198.168.0.1 (198.168.0.1) 56(84) bytes of data. --- 198.168.0.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms

  Read the article

• How to resolve "dpkg: error processing /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb"?

  - by raz7588

  Update Manager will not update although I have over 100 updates to do I get a error message like this: installArchives() failed: Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 189751 files and directories currently installed.) Preparing to replace python-problem-report 2.0.1-0ubuntu7 (using .../python-problem-report_2.0.1-0ubuntu9_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-problem-report_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace python-apport 2.0.1-0ubuntu7 (using .../python-apport_2.0.1-0ubuntu9_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace apport 2.0.1-0ubuntu7 (using .../apport_2.0.1-0ubuntu9_all.deb) ... apport stop/waiting Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/apport_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already apport start/running Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace gnome-orca 3.4.1-0ubuntu0.1 (using .../gnome-orca_3.4.2-0ubuntu0.1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/gnome-orca_3.4.2-0ubuntu0.1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace python-piston-mini-client 0.7.2-0ubuntu1 (using .../python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace oneconf 0.2.8 (using .../oneconf_0.2.8.1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/oneconf_0.2.8.1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace software-center 5.2.2 (using .../software-center_5.2.2.2_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/software-center_5.2.2.2_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace libglade2-0 1:2.6.4-1ubuntu1 (using .../libglade2-0_1%%3a2.6.4-1ubuntu1.1_amd64.deb) ... Unpacking replacement libglade2-0 ... Preparing to replace libv4l-0 0.8.6-1ubuntu1 (using .../libv4l-0_0.8.6-1ubuntu2_amd64.deb) ... De-configuring libv4l-0:i386 ... Unpacking replacement libv4l-0 ... Preparing to replace libv4l-0:i386 0.8.6-1ubuntu1 (using .../libv4l-0_0.8.6-1ubuntu2_i386.deb) ... Unpacking replacement libv4l-0:i386 ... Preparing to replace libv4lconvert0:i386 0.8.6-1ubuntu1 (using .../libv4lconvert0_0.8.6-1ubuntu2_i386.deb) ... De-configuring libv4lconvert0 ... Unpacking replacement libv4lconvert0:i386 ... Preparing to replace libv4lconvert0 0.8.6-1ubuntu1 (using .../libv4lconvert0_0.8.6-1ubuntu2_amd64.deb) ... Unpacking replacement libv4lconvert0 ... Errors were encountered while processing: /var/cache/apt/archives/python-problem-report_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/apport_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/gnome-orca_3.4.2-0ubuntu0.1_all.deb /var/cache/apt/archives/python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb /var/cache/apt/archives/oneconf_0.2.8.1_all.deb /var/cache/apt/archives/software-center_5.2.2.2_all.deb Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up libglade2-0 (1:2.6.4-1ubuntu1.1) ... dpkg: error processing gnome-orca (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. dpkg: error processing python-problem-report (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Setting up libv4lconvert0 (0.8.6-1ubuntu2) ... Setting up libv4lconvert0:i386 (0.8.6-1ubuntu2) ... dpkg: error processing python-piston-mini-client (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Setting up libv4l-0 (0.8.6-1ubuntu2) ... Setting up libv4l-0:i386 (0.8.6-1ubuntu2) ... dpkg: dependency problems prevent configuration of python-apport: python-apport depends on python-problem-report (>= 0.94); however: Package python-problem-report is not configured yet. dpkg: error processing python-apport (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of software-center: software-center depends on python-piston-mini-client (>= 0.1+bzr29); however: Package python-piston-mini-client is not configured yet. dpkg: error processing software-center (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of oneconf: oneconf depends on python-piston-mini-client (>= 0.3+bzr32-0ubuntu1); however: Package python-piston-mini-client is not configured yet. dpkg: error processing oneconf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of apport: apport depends on python-apport (>= 2.0.1-0ubuntu7); however: Package python-apport is not configured yet. dpkg: error processing apport (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin ... ldconfig deferred processing now taking place This has been going on for two weeks now and I cannot get any updates. Any help would be great.

  Read the article

• MySQL port 3306 blocked in csf yet can still telnet to port 3306 from external host

  - by Neek

  We have a Centos 6 VPS that was recently migrated to a new machine within the same web hosting company. It's running WHM/cPanel and has csf/lfd installed. csf is set up with mostly vanilla config. I'm no iptables expert, csf has not let me down before. If a port isn't in the TCP_IN list, it should be blocked on the firewall by iptables. My problem is that I can telnet to port 3306 from an external host, yet I think iptables ought to be blocking 3306 because of csf's rules. We are now failing a security check because of this open port. (this output is obfuscated to protect the innocent: www.ourhost.com is the host with the firewall problem) [root@nickfenwick log]# telnet www.ourhost.com 3306 Trying 158.255.45.107... Connected to www.ourhost.com. Escape character is '^]'. HHost 'nickfenwick.com' is not allowed to connect to this MySQL serverConnection closed by foreign host. So the connection is established, and MySQL refuses the connection due to its configuration. I need the network connection to be refused at the firewall level, before it reaches MySQL. Using WHM's csf web UI I can see 'Firewall Configuration' includes a fairly sensible TCP_IN line: TCP_IN: 20,21,22,25,53,80,110,143,222,443,465,587,993,995,2077,2078,2082,2083,2086,2087,2095,2096,8080 (lets ignore that I could trim that a little for now, my concern is that 3306 is not listed in that list) When csf is restarted it logs the usual slew of output as it sets up iptables rules, for example what looks like it blocking all traffic and then allowing specific ports like SSH on 22: [cut] DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 [cut] ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22 [cut] I can see that iptables is running, service iptables status returns a long list of firewall rules. Here is my Chain INPUT section from service iptables status, hopefully that's enough to show how the firewall is configured. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 acctboth all -- 0.0.0.0/0 0.0.0.0/0 2 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp dpt:53 3 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp dpt:53 4 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp spt:53 5 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp spt:53 6 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp dpt:53 7 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp dpt:53 8 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp spt:53 9 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp spt:53 10 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp dpt:53 11 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp dpt:53 12 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp spt:53 13 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp spt:53 14 LOCALINPUT all -- 0.0.0.0/0 0.0.0.0/0 15 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 16 INVALID tcp -- 0.0.0.0/0 0.0.0.0/0 17 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 18 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:20 19 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21 20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53 23 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 24 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:143 26 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:222 27 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 28 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:465 29 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:587 30 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:993 31 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:995 32 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2077 33 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2078 34 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2082 35 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2083 36 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2086 37 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2087 38 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2095 39 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2096 40 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080 41 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:20 42 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:21 43 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:53 44 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:222 45 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:8080 46 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 47 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 48 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 49 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 50 LOGDROPIN all -- 0.0.0.0/0 0.0.0.0/0 What's the next thing to check?

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• 404 when doing safe-upgrade in lucid 64 box?

  - by Millisami

  Why I see 404 when doing sudo aptitude safe-upgrade in my lucid 64 box? deploy@li167-251:~$ sudo aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following packages will be upgraded: apache2 apache2-mpm-prefork apache2-threaded-dev apache2-utils apache2.2-bin apache2.2-common apt apt-utils base-files binutils bzip2 dpkg dpkg-dev gzip ifupdown krb5-multidev language-pack-en language-pack-en-base language-selector-common libatk1.0-0 libatk1.0-dev libavahi-client3 libavahi-common-data libavahi-common3 libbz2-1.0 libc-bin libc-dev-bin libc6 libc6-dev libc6-i686 libcups2 libfreetype6 libfreetype6-dev libglib2.0-0 libglib2.0-dev libgssapi-krb5-2 libgssrpc4 libgtk2.0-0 libgtk2.0-common libgtk2.0-dev libk5crypto3 libkadm5clnt-mit7 libkadm5srv-mit7 libkdb5-4 libkrb5-3 libkrb5-dev libkrb5support0 libldap-2.4-2 libldap2-dev libmysqlclient-dev libmysqlclient16 libnotify-dev libnotify1 libpam-modules libpam-runtime libpam0g libparted0debian1 libpng12-0 libpng12-dev libpq-dev libpq5 libssl-dev libssl0.9.8 libtiff4 libudev0 libusb-0.1-4 linux-libc-dev mountall mysql-client mysql-client-5.1 mysql-client-core-5.1 mysql-common mysql-server mysql-server-5.1 mysql-server-core-5.1 openssh-client openssh-server openssl parted python-apt sudo tzdata udev upstart ureadahead wget xulrunner-1.9.2 xulrunner-1.9.2-dev The following packages are RECOMMENDED but will NOT be installed: colibri debhelper fakeroot hicolor-icon-theme libatk1.0-data libglib2.0-data libgtk2.0-bin libhtml-template-perl manpages-dev notification-daemon notify-osd ssl-cert xauth xfce4-notifyd 88 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 85.8MB of archives. After unpacking 1712kB will be used. Do you want to continue? [Y/n/?] y Writing extended state information... Done Get:1 http://security.ubuntu.com/ubuntu/ lucid-updates/main libpam-modules 1.1.1-2ubuntu5 [358kB] Get:2 http://security.ubuntu.com/ubuntu/ lucid-updates/main base-files 5.0.0ubuntu20.10.04.2 [70.2kB] Get:3 http://security.ubuntu.com/ubuntu/ lucid-updates/main gzip 1.3.12-9ubuntu1.1 [102kB] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc-bin 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6-i686 2.11.1-0ubuntu7.2 .........

  Read the article

• Select different parts of an line

  - by Ricardo Sa

  I'm new to regexes and have a file that looks like this one: |60|493,93|1,6500| |60|95,72|1,6500| |60|43,88|1,6500| |60|972,46|1,6500| I used the regex (\|60|.*)(1,65) and I was able to find all the lines that have the information that I wanted to changed. How can I make an replace that when Notepad++ finds (\|60|.*)(1,65), the 60 should be replaced with 50: |50|493,93|1,6500| |50|95,72|1,6500| |50|43,88|1,6500| |50|972,46|1,6500| PS: here's an example of the full line: |C170|002|34067||44,14000|KG|493,93|0|0|020|1102||288,11|12,00|34,57|0|0|0|0|||0|0|0|60|493,93|1,6500|||8,15|60|493,93|7,6000|||37,54||

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, I am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now I get this error when I try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do I need to change in order my win xp join the domain

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• Bsplayer - load audio tracks from external files

  - by torran

  I have a movie file: Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 5 frames Muxing mode : Container [email protected] Codec ID : V_MPEG4/ISO/AVC Duration : 54mn 13s Bit rate : 3 380 Kbps Nominal bit rate : 3 459 Kbps Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Resolution : 8 bits Colorimetry : 4:2:0 Scan type : Progressive Bits/(Pixel*Frame) : 0.153 Stream size : 1.28 GiB (88%) Writing library : x264 core 88 r1471 1144615 Audio ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Codec ID : A_AC3 Duration : 54mn 16s Bit rate mode : Constant Bit rate : 384 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 KHz Stream size : 149 MiB (10%) and additional audio files in same folder: .mp3 and .ac3. How can I load them with bsplayer? Right click-audio-audio streams is empty. If i open the movie with media players classic I can switch audio files.

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• have 2 exchange servers to communicate together!

  - by Data-Base

  we have our exchange server 2007 (10.10.2.11) at work with domain "dddddd.com" and ironport and it work just fine! we need to test some thing at work with Exchange 2010 !! so we came up with this idea: we created a locked network and install firewall (10.10.2.88) the locked network has it's own DC and Exchange servers! we used the domain "dddddd.loc" any way it will be deleted! IPs DC 10.0.0.1 EX 10.0.0.11 now the Exchange server up and running in the firewall (10.10.2.88) we opened the ports and forwarded it to the Exchange2010 (10.0.0.11) in our main DC we defined the zone dddddd.loc to the firewall and the MX records as well but when we test we get error now how to make it so that the 2010 will send email directly to the 2007 (we will not use it to more that that)? and the 2007 will send the email to 2010 if the email has the domain dddddd.loc ?

  Read the article

• Does Apache ever give incorrect "out of threads" errors?

  - by Eli Courtwright

  Lately our Apache web server has been giving us this error multiple times per day: [Tue Apr 06 01:07:10 2010] [error] Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting We raised our ThreadsPerChild setting from 50 to 100, but we still get the error. Our access logs indicate that these errors never even happen at periods of high load. For example, here's an excerpt from our access log (ip addresses and some urls are edited for privacy). As you can see, the above error happened at 1:07 and only a small handful of requests occurred in the several minutes leading up to the error: 99.88.77.66 - - [06/Apr/2010:00:59:33 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-icons_222222_256x240.png HTTP/1.1" 304 - 99.88.77.66 - - [06/Apr/2010:00:59:34 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_dadada_1x400.png HTTP/1.1" 200 111 99.88.77.66 - - [06/Apr/2010:00:59:34 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_dadada_1x400.png HTTP/1.1" 200 111 99.88.77.66 - mpeu [06/Apr/2010:00:59:40 -0400] "GET /some/dynamic/content HTTP/1.1" 200 145049 55.44.33.22 - mpeu [06/Apr/2010:01:06:56 -0400] "GET /other/dynamic/content HTTP/1.1" 200 12311 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/jquery-ui-1.7.1.custom.css HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-1.3.2.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-ui-1.7.1.custom.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery.tablesorter.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/date.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image1.gif HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image2.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image3.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image4.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image5.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image6.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image7.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/image8.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/image9.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/imageA.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_flat_75_ffffff_40x100.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_highlight-soft_75_cccccc_1x100.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_e6e6e6_1x400.png HTTP/1.1" 200 110 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_e6e6e6_1x400.png HTTP/1.1" 200 110 11.22.33.44 - mpeu [06/Apr/2010:01:18:03 -0400] "GET /other/dynamic/content HTTP/1.1" 200 12311 11.22.33.44 - - [06/Apr/2010:01:18:03 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-1.3.2.min.js HTTP/1.1" 304 - 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/jquery-ui-1.7.1.custom.css HTTP/1.1" 200 27374 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-ui-1.7.1.custom.min.js HTTP/1.1" 304 - 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery.tablesorter.min.js HTTP/1.1" 200 12795 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/date.js HTTP/1.1" 200 25809 For what it's worth, we're running the version of Apache that ships with Oracle 10g (some 2.0 version), and we're using mod_plsql to generate our dynamic content. Since the Apache server runs as a separate process and the database doesn't record any problems when this error occurs, I'm doubtful that Oracle is the problem. Unfortunately, the errors are freaking out our sysadmins, who are inclined to blame any and all problems which occur with the server on this error. Is this a known bug in Apache that I simply haven't been able to find any reference to through Google?

  Read the article

• Flex Builder debug problem

  - by Chetan Sachdev

  I am running on Windows XP and recently updated Flash Player from v9 to v10.1. And Now, in the Debug Console under Flex Builder, I am getting a lot of debug statements(I think that is assembly). Below is an example, of what I get: " active: eax(737-757) ecx(738-758) ebx(3-797) esi(728-756) @739 st 143112124(0) <- @3 09002830 mov 143112124(0), ebx active: eax(737-757) ecx(738-758) ebx(3-797) esi(728-756) @740 ldop 0(@3) 09002836 mov edx, 0(ebx) active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) @741 ldop 20(@740) 09002838 mov edi, 20(edx) active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(741-742) * @742 lea 4(@741) spans call 0900283B lea edi, 4(edi) active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @743 st 143111460(0) <- @742 0900283E mov 143111460(0), edi active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @744 alloc 12 alloca 12 at 120 for @744 activation.size 132 stacksize 132 entries 17 -8(ebp) (6-792) alloc -20(ebp) (7-792) alloc -68(ebp) (8-792) alloc -72(ebp) (0-793) arg -76(ebp) (16-797) def -80(ebp) (440-797) def -80(ebp) -84(ebp) -88(ebp) (1-793) arg -92(ebp) -96(ebp) -100(ebp) (2-793) arg -104(ebp) -112(ebp) -116(ebp) -120(ebp) -132(ebp) (744-760) alloc active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @745 imm 2 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @746 st 0(@744) <- @745 09002844 mov -132(ebp), 2 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @747 imm 139523392 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @748 st 4(@744) <- @747 0900284E mov -128(ebp), 139523392 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @749 imm 136426472 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @750 st 8(@744) <- @749 09002855 mov -124(ebp), 136426472 active: eax(737-757) ecx(738-758) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @751 ldop 16(@738) STEAL any @738 alloca 4 at 80 for @738 activation.size 132 stacksize 132 entries 17 -8(ebp) (6-792) alloc -20(ebp) (7-792) alloc -68(ebp) (8-792) alloc -72(ebp) (0-793) arg -76(ebp) (16-797) def -80(ebp) (440-797) def -80(ebp) -84(ebp) (738-758) use -88(ebp) (1-793) arg -92(ebp) -96(ebp) -100(ebp) (2-793) arg -104(ebp) -112(ebp) -116(ebp) -120(ebp) -132(ebp) (744-760) alloc 0900285C mov -84(ebp), ecx 0900285F mov ecx, 16(ecx) active: eax(737-757) ecx(751-759) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @752 imm 1 active: eax(737-757) ecx(751-759) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * @753 or @738 @752 STEAL any @751 alloca 4 at 88 for @751 activation.size 132 stacksize 132 entries 17 -8(ebp) (6-792) alloc -20(ebp) (7-792) alloc -68(ebp) (8-792) alloc -72(ebp) (0-793) arg -76(ebp) (16-797) def -80(ebp) (440-797) def -80(ebp) -84(ebp) (738-758) use -88(ebp) (1-793) arg -92(ebp) (751-759) ldop -96(ebp) -100(ebp) (2-793) arg -104(ebp) -112(ebp) -116(ebp) -120(ebp) -132(ebp) (744-760) alloc 09002862 mov -92(ebp), ecx 09002865 mov ecx, -84(ebp) 09002868 or ecx, 1 active: eax(737-757) ecx(753-759) edx(740-754) ebx(3-797) esi(728-756) edi(742-769) * " I am not sure, why it started, but any help will be appreciated.

  Read the article

• Set IP address to point to certain domain

  - by silvercover

  I have a Linux VPS, DirectAdmin as web panel and already set a domain to it. everything is OK and I can see my website in my browser using domain name. Now I need to have access to my site using its IP address. something like http://86.57.88.29, but when I try to load my site in a browser using its IP I get below message and I have to post-fix my IP with /~admin (http://86.57.88.29/~admin) to get it work. This IP is being shared among many domains. To view the domain you are looking for, simply enter the domain name in the location bar of your web browser. So how can I configure my IP to point to my public_html folder without and ~admin like phrase? Thanks.

  Read the article

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? To be clear: Within the windows/linux OS, all browsers work perfectly. Within mac only firefox works if it uses its internal certificate store and not the keychain. It's the keychain method of importing a certificate that causes the issue. Thus, all browsers using the keychain will not work. Root CA Cert: -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE----- Intermediate CA Cert: Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: C=*****, ST=*******, L=******, O=*******, CN=******/emailAddress=****** Validity Not Before: May 21 13:57:32 2014 GMT Not After : Jun 20 13:57:32 2014 GMT Subject: C=*****, ST=********, O=*******, CN=*******/emailAddress=******* Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (4096 bit) Modulus (4096 bit): 00:e7:2d:75:38:23:02:8e:b9:8d:2f:33:4c:2a:11: 6d:d4:f8:29:ab:f3:fc:12:00:0f:bb:34:ec:35:ed: a5:38:10:1e:f3:54:c2:69:ae:3b:22:c0:0d:00:97: 08:da:b9:c9:32:c0:c6:b1:8b:22:7e:53:ea:69:e2: 6d:0f:bd:f5:96:b2:d0:0d:b2:db:07:ba:f1:ce:53: 8a:5e:e0:22:ce:3e:36:ed:51:63:21:e7:45:ad:f9: 4d:9b:8f:7f:33:4c:ed:fc:a6:ac:16:70:f5:96:36: 37:c8:65:47:d1:d3:12:70:3e:8d:2f:fb:9f:94:e0: c9:5f:d0:8c:30:e0:04:23:38:22:e5:d9:84:15:b8: 31:e7:a7:28:51:b8:7f:01:49:fb:88:e9:6c:93:0e: 63:eb:66:2b:b4:a0:f0:31:33:8b:b4:04:84:1f:9e: d5:ed:23:cc:bf:9b:8e:be:9a:5c:03:d6:4f:1a:6f: 2d:8f:47:60:6c:89:c5:f0:06:df:ac:cb:26:f8:1a: 48:52:5e:51:a0:47:6a:30:e8:bc:88:8b:fd:bb:6b: c9:03:db:c2:46:86:c0:c5:a5:45:5b:a9:a3:61:35: 37:e9:fc:a1:7b:ae:71:3a:5c:9c:52:84:dd:b2:86: b3:2e:2e:7a:5b:e1:40:34:4a:46:f0:f8:43:26:58: 30:87:f9:c6:c9:bc:b4:73:8b:fc:08:13:33:cc:d0: b7:8a:31:e9:38:a3:a9:cc:01:e2:d4:c2:a5:c1:55: 52:72:52:2b:06:a3:36:30:0c:5c:29:1a:dd:14:93: 2b:9d:bf:ac:c1:2d:cd:3f:89:1f:bc:ad:a4:f2:bd: 81:77:a9:f4:f0:b9:50:9e:fb:f5:da:ee:4e:b7:66: e5:ab:d1:00:74:29:6f:01:28:32:ea:7d:3f:b3:d7: 97:f2:60:63:41:0f:30:6a:aa:74:f4:63:4f:26:7b: 71:ed:57:f1:d4:99:72:61:f4:69:ad:31:82:76:67: 21:e1:32:2f:e8:46:d3:28:61:b1:10:df:4c:02:e5: d3:cc:22:30:a4:bb:81:10:dc:7d:49:94:b2:02:2d: 96:7f:e5:61:fa:6b:bd:22:21:55:97:82:18:4e:b5: a0:67:2b:57:93:1c:ef:e5:d2:fb:52:79:95:13:11: 20:06:8c:fb:e7:0b:fd:96:08:eb:17:e6:5b:b5:a0: 8d:dd:22:63:99:af:ad:ce:8c:76:14:9a:31:55:d7: 95:ea:ff:10:6f:7c:9c:21:00:5e:be:df:b0:87:75: 5d:a6:87:ca:18:94:e7:6a:15:fe:27:dd:28:5e:c0: ad:d2:91:d3:2d:8e:c3:c0:9f:fb:ff:c0:36:7e:e2: d7:bc:41 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Subject Alternative Name: DNS:localhost, DNS:dropbox.com, DNS:*.dropbox.com, DNS:filedropper.com, DNS:*.filedropper.com X509v3 Subject Key Identifier: F3:E5:38:5B:3C:AF:1C:73:C1:4C:7D:8B:C8:A1:03:82:65:0D:FF:45 X509v3 Authority Key Identifier: keyid:2B:37:39:7B:9F:45:14:FE:F8:BC:CA:E0:6E:B4:5F:D6:1A:2B:D7:B0 DirName:/C=****/ST=******/L=*******/O=*******/CN=******/emailAddress=******* serial:EE:8C:A3:B4:40:90:B0:62 X509v3 Basic Constraints: CA:TRUE Signature Algorithm: sha1WithRSAEncryption 46:2a:2c:e0:66:e3:fa:c6:80:b6:81:e7:db:c3:29:ab:e7:1c: f0:d9:a0:b7:a9:57:8c:81:3e:30:8f:7d:ef:f7:ed:3c:5f:1e: a5:f6:ae:09:ab:5e:63:b4:f6:d6:b6:ac:1c:a0:ec:10:19:ce: dd:5a:62:06:b4:88:5a:57:26:81:8e:38:b9:0f:26:cd:d9:36: 83:52:ec:df:f4:63:ce:a1:ba:d4:1c:ec:b6:66:ed:f0:32:0e: 25:87:79:fa:95:ee:0f:a0:c6:2d:8f:e9:fb:11:de:cf:26:fa: 59:fa:bd:0b:74:76:a6:5d:41:0d:cd:35:4e:ca:80:58:2a:a8: 5d:e4:d8:cf:ef:92:8d:52:f9:f2:bf:65:50:da:a8:10:1b:5e: 50:a7:7e:57:7b:94:7f:5c:74:2e:80:ae:1e:24:5f:0b:7b:7e: 19:b6:b5:bd:9d:46:5a:e8:47:43:aa:51:b3:4b:3f:12:df:7f: ef:65:21:85:c2:f6:83:84:d0:8d:8b:d9:6d:a8:f9:11:d4:65: 7d:8f:28:22:3c:34:bb:99:4e:14:89:45:a4:62:ed:52:b1:64: 9a:fd:08:cd:ff:ca:9e:3b:51:81:33:e6:37:aa:cb:76:01:90: d1:39:6f:6a:8b:2d:f5:07:f8:f4:2a:ce:01:37:ba:4b:7f:d4: 62:d7:d6:66:b8:78:ad:0b:23:b6:2e:b0:9a:fc:0f:8c:4c:29: 86:a0:bc:33:71:e5:7f:aa:3e:0e:ca:02:e1:f6:88:f0:ff:a2: 04:5a:f5:d7:fe:7d:49:0a:d2:63:9c:24:ed:02:c7:4d:63:e6: 0c:e1:04:cd:a4:bf:a8:31:d3:10:db:b4:71:48:f7:1a:1b:d9: eb:a7:2e:26:00:38:bd:a8:96:b4:83:09:c9:3d:79:90:e1:61: 2c:fc:a0:2c:6b:7d:46:a8:d7:17:7f:ae:60:79:c1:b6:5c:f9: 3c:84:64:7b:7f:db:e9:f1:55:04:6e:b5:d3:5e:d3:e3:13:29: 3f:0b:03:f2:d7:a8:30:02:e1:12:f4:ae:61:6f:f5:4b:e9:ed: 1d:33:af:cd:9b:43:42:35:1a:d4:f6:b9:fb:bf:c9:8d:6c:30: 25:33:43:49:32:43:a5:a8:d8:82:ef:b0:a6:bd:8b:fb:b6:ed: 72:fd:9a:8f:00:3b:97:a3:35:a4:ad:26:2f:a9:7d:74:08:82: 26:71:40:f9:9b:01:14:2e:82:fb:2f:c0:11:51:00:51:07:f9: e1:f6:1f:13:6e:03:ee:d7:85:c2:64:ce:54:3f:15:d4:d7:92: 5f:87:aa:1e:b4:df:51:77:12:04:d2:a5:59:b3:26:87:79:ce: ee:be:60:4e:87:20:5c:7f -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE-----

  Read the article

• Puppet's automatically generated certificates failing

  - by gparent

  I am running a default configuration of Puppet on Debian Squeeze 6.0.4. The server's FQDN is master.example.com. The client's FQDN is client.example.com. I am able to contact the puppet master and send a CSR. I sign it using puppetca -sa but the client will still not connect. Date of both machines is within 2 seconds of Tue Apr 3 20:59:00 UTC 2012 as I wrote this sentence. This is what appears in /var/log/syslog: Apr 3 17:03:52 localhost puppet-agent[18653]: Reopening log files Apr 3 17:03:52 localhost puppet-agent[18653]: Starting Puppet client version 2.6.2 Apr 3 17:03:53 localhost puppet-agent[18653]: Could not retrieve catalog from remote server: SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed Apr 3 17:03:53 localhost puppet-agent[18653]: Using cached catalog Apr 3 17:03:53 localhost puppet-agent[18653]: Could not retrieve catalog; skipping run Here is some interesting output: OpenSSL client test: client:~# openssl s_client -host master.example.com -port 8140 -cert /var/lib/puppet/ssl/certs/client.example.com.pem -key /var/lib/puppet/ssl/private_keys/client.example.com.pem -CAfile /var/lib/puppet/ssl/certs/ca.pem CONNECTED(00000003) depth=1 /CN=Puppet CA: master.example.com verify return:1 depth=0 /CN=master.example.com verify error:num=7:certificate signature failure verify return:1 depth=0 /CN=master.example.com verify return:1 18509:error:1409441B:SSL routines:SSL3_READ_BYTES:tlsv1 alert decrypt error:s3_pkt.c:1102:SSL alert number 51 18509:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: client:~# master's certificate: root@master:/etc/puppet# openssl x509 -text -noout -in /etc/puppet/ssl/certs/master.example.com.pem Certificate: Data: Version: 3 (0x2) Serial Number: 2 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:28 2012 GMT Not After : Apr 2 20:01:28 2017 GMT Subject: CN=master.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:a9:c1:f9:4c:cd:0f:68:84:7b:f4:93:16:20:44: 7a:2b:05:8e:57:31:05:8e:9c:c8:08:68:73:71:39: c1:86:6a:59:93:6e:53:aa:43:11:83:5b:2d:8c:7d: 54:05:65:c1:e1:0e:94:4a:f0:86:58:c3:3d:4f:f3: 7d:bd:8e:29:58:a6:36:f4:3e:b2:61:ec:53:b5:38: 8e:84:ac:5f:a3:e3:8c:39:bd:cf:4f:3c:ff:a9:65: 09:66:3c:ba:10:14:69:d5:07:57:06:28:02:37:be: 03:82:fb:90:8b:7d:b3:a5:33:7b:9b:3a:42:51:12: b3:ac:dd:d5:58:69:a9:8a:ed Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C X509v3 Extended Key Usage: critical TLS Web Server Authentication, TLS Web Client Authentication Signature Algorithm: sha1WithRSAEncryption 7b:2c:4f:c2:76:38:ab:03:7f:c6:54:d9:78:1d:ab:6c:45:ab: 47:02:c7:fd:45:4e:ab:b5:b6:d9:a7:df:44:72:55:0c:a5:d0: 86:58:14:ae:5f:6f:ea:87:4d:78:e4:39:4d:20:7e:3d:6d:e9: e2:5e:d7:c9:3c:27:43:a4:29:44:85:a1:63:df:2f:55:a9:6a: 72:46:d8:fb:c7:cc:ca:43:e7:e1:2c:fe:55:2a:0d:17:76:d4: e5:49:8b:85:9f:fa:0e:f6:cc:e8:28:3e:8b:47:b0:e1:02:f0: 3d:73:3e:99:65:3b:91:32:c5:ce:e4:86:21:b2:e0:b4:15:b5: 22:63 root@master:/etc/puppet# CA's certificate: root@master:/etc/puppet# openssl x509 -text -noout -in /etc/puppet/ssl/certs/ca.pem Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:05 2012 GMT Not After : Apr 2 20:01:05 2017 GMT Subject: CN=Puppet CA: master.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:b5:2c:3e:26:a3:ae:43:b8:ed:1e:ef:4d:a1:1e: 82:77:78:c2:98:3f:e2:e0:05:57:f0:8d:80:09:36: 62:be:6c:1a:21:43:59:1d:e9:b9:4d:e0:9c:fa:09: aa:12:a1:82:58:fc:47:31:ed:ad:ad:73:01:26:97: ef:d2:d6:41:6b:85:3b:af:70:00:b9:63:e9:1b:c3: ce:57:6d:95:0e:a6:d2:64:bd:1f:2c:1f:5c:26:8e: 02:fd:d3:28:9e:e9:8f:bc:46:bb:dd:25:db:39:57: 81:ed:e5:c8:1f:3d:ca:39:cf:e7:f3:63:75:f6:15: 1f:d4:71:56:ed:84:50:fb:5d Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:TRUE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Certificate Sign, CRL Sign X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C Signature Algorithm: sha1WithRSAEncryption 1d:cd:c6:65:32:42:a5:01:62:46:87:10:da:74:7e:8b:c8:c9: 86:32:9e:c2:2e:c1:fd:00:79:f0:ef:d8:73:dd:7e:1b:1a:3f: cc:64:da:a3:38:ad:49:4e:c8:4d:e3:09:ba:bc:66:f2:6f:63: 9a:48:19:2d:27:5b:1d:2a:69:bf:4f:f4:e0:67:5e:66:84:30: e5:85:f4:49:6e:d0:92:ae:66:77:50:cf:45:c0:29:b2:64:87: 12:09:d3:10:4d:91:b6:f3:63:c4:26:b3:fa:94:2b:96:18:1f: 9b:a9:53:74:de:9c:73:a4:3a:8d:bf:fa:9c:c0:42:9d:78:49: 4d:70 root@master:/etc/puppet# Client's certificate: client:~# openssl x509 -text -noout -in /var/lib/puppet/ssl/certs/client.example.com.pem Certificate: Data: Version: 3 (0x2) Serial Number: 3 (0x3) Signature Algorithm: sha1WithRSAEncryption Issuer: CN=Puppet CA: master.example.com Validity Not Before: Apr 2 20:01:36 2012 GMT Not After : Apr 2 20:01:36 2017 GMT Subject: CN=client.example.com Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:ae:88:6d:9b:e3:b1:fc:47:07:d6:bf:ea:53:d1: 14:14:9b:35:e6:70:43:e0:58:35:76:ac:c5:9d:86: 02:fd:77:28:fc:93:34:65:9d:dd:0b:ea:21:14:4d: 8a:95:2e:28:c9:a5:8d:a2:2c:0e:1c:a0:4c:fa:03: e5:aa:d3:97:98:05:59:3c:82:a9:7c:0e:e9:df:fd: 48:81:dc:33:dc:88:e9:09:e4:19:d6:e4:7b:92:33: 31:73:e4:f2:9c:42:75:b2:e1:9f:d9:49:8c:a7:eb: fa:7d:cb:62:22:90:1c:37:3a:40:95:a7:a0:3b:ad: 8e:12:7c:6e:ad:04:94:ed:47 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE Netscape Comment: Puppet Ruby/OpenSSL Internal Certificate X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Subject Key Identifier: 8C:2F:14:84:B6:A1:B5:0C:11:52:36:AB:E5:3F:F2:B9:B3:25:F3:1C X509v3 Extended Key Usage: critical TLS Web Server Authentication, TLS Web Client Authentication Signature Algorithm: sha1WithRSAEncryption 33:1f:ec:3c:91:5a:eb:c6:03:5f:a1:58:60:c3:41:ed:1f:fe: cb:b2:40:11:63:4d:ba:18:8a:8b:62:ba:ab:61:f5:a0:6c:0e: 8a:20:56:7b:10:a1:f9:1d:51:49:af:70:3a:05:f9:27:4a:25: d4:e6:88:26:f7:26:e0:20:30:2a:20:1d:c4:d3:26:f1:99:cf: 47:2e:73:90:bd:9c:88:bf:67:9e:dd:7c:0e:3a:86:6b:0b:8d: 39:0f:db:66:c0:b6:20:c3:34:84:0e:d8:3b:fc:1c:a8:6c:6c: b1:19:76:65:e6:22:3c:bf:ff:1c:74:bb:62:a0:46:02:95:fa: 83:41 client:~#

  Read the article

• Mapping UrlEncoded POST Values in ASP.NET Web API

  - by Rick Strahl

  If there's one thing that's a bit unexpected in ASP.NET Web API, it's the limited support for mapping url encoded POST data values to simple parameters of ApiController methods. When I first looked at this I thought I was doing something wrong, because it seems mighty odd that you can bind query string values to parameters by name, but can't bind POST values to parameters in the same way. To demonstrate here's a simple example. If you have a Web API method like this:[HttpGet] public HttpResponseMessage Authenticate(string username, string password) { …} and then hit with a URL like this: http://localhost:88/samples/authenticate?Username=ricks&Password=sekrit it works just fine. The query string values are mapped to the username and password parameters of our API method. But if you now change the method to work with [HttpPost] instead like this:[HttpPost] public HttpResponseMessage Authenticate(string username, string password) { …} and hit it with a POST HTTP Request like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Content-type: application/x-www-form-urlencoded Content-Length: 30 Username=ricks&Password=sekrit you'll find that while the request works, it doesn't actually receive the two string parameters. The username and password parameters are null and so the method is definitely going to fail. When I mentioned this over Twitter a few days ago I got a lot of responses back of why I'd want to do this in the first place - after all HTML Form submissions are the domain of MVC and not WebAPI which is a valid point. However, the more common use case is using POST Variables with AJAX calls. The following is quite common for passing simple values:$.post(url,{ Username: "Rick", Password: "sekrit" },function(result) {…}); but alas that doesn't work. How ASP.NET Web API handles Content Bodies Web API supports parsing content data in a variety of ways, but it does not deal with multiple posted content values. In effect you can only post a single content value to a Web API Action method. That one parameter can be very complex and you can bind it in a variety of ways, but ultimately you're tied to a single POST content value in your parameter definition. While it's possible to support multiple parameters on a POST/PUT operation, only one parameter can be mapped to the actual content - the rest have to be mapped to route values or the query string. Web API treats the whole request body as one big chunk of data that is sent to a Media Type Formatter that's responsible for de-serializing the content into whatever value the method requires. The restriction comes from async nature of Web API where the request data is read only once inside of the formatter that retrieves and deserializes it. Because it's read once, checking for content (like individual POST variables) first is not possible. However, Web API does provide a couple of ways to access the form POST data: Model Binding - object property mapping to bind POST values FormDataCollection - collection of POST keys/values ModelBinding POST Values - Binding POST data to Object Properties The recommended way to handle POST values in Web API is to use Model Binding, which maps individual urlencoded POST values to properties of a model object provided as the parameter. Model binding requires a single object as input to be bound to the POST data, with each POST key that matches a property name (including nested properties like Address.Street) being mapped and updated including automatic type conversion of simple types. This is a very nice feature - and a familiar one from MVC - that makes it very easy to have model objects mapped directly from inbound data. The obvious drawback with Model Binding is that you need a model for it to work: You have to provide a strongly typed object that can receive the data and this object has to map the inbound data. To rewrite the example above to use ModelBinding I have to create a class maps the properties that I need as parameters:public class LoginData { public string Username { get; set; } public string Password { get; set; } } and then accept the data like this in the API method:[HttpPost] public HttpResponseMessage Authenticate(LoginData login) { string username = login.Username; string password = login.Password; … } This works fine mapping the POST values to the properties of the login object. As a side benefit of this method definition, the method now also allows posting of JSON or XML to the same endpoint. If I change my request to send JSON like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: application/jsonContent-type: application/json Content-Length: 40 {"Username":"ricks","Password":"sekrit"} it works as well and transparently, courtesy of the nice Content Negotiation features of Web API. There's nothing wrong with using Model binding and in fact it's a common practice to use (view) model object for inputs coming back from the client and mapping them into these models. But it can be  kind of a hassle if you have AJAX applications with a ton of backend hits, especially if many methods are very atomic and focused and don't effectively require a model or view. Not always do you have to pass structured data, but sometimes there are just a couple of simple response values that need to be sent back. If all you need is to pass a couple operational parameters, creating a view model object just for parameter purposes seems like overkill. Maybe you can use the query string instead (if that makes sense), but if you can't then you can often end up with a plethora of 'message objects' that serve no further  purpose than to make Model Binding work. Note that you can accept multiple parameters with ModelBinding so the following would still work:[HttpPost] public HttpResponseMessage Authenticate(LoginData login, string loginDomain) but only the object will be bound to POST data. As long as loginDomain comes from the querystring or route data this will work. Collecting POST values with FormDataCollection Another more dynamic approach to handle POST values is to collect POST data into a FormDataCollection. FormDataCollection is a very basic key/value collection (like FormCollection in MVC and Request.Form in ASP.NET in general) and then read the values out individually by querying each. [HttpPost] public HttpResponseMessage Authenticate(FormDataCollection form) { var username = form.Get("Username"); var password = form.Get("Password"); …} The downside to this approach is that it's not strongly typed, you have to handle type conversions on non-string parameters, and it gets a bit more complicated to test such as setup as you have to seed a FormDataCollection with data. On the other hand it's flexible and easy to use and especially with string parameters is easy to deal with. It's also dynamic, so if the client sends you a variety of combinations of values on which you make operating decisions, this is much easier to work with than a strongly typed object that would have to account for all possible values up front. The downside is that the code looks old school and isn't as self-documenting as a parameter list or object parameter would be. Nevertheless it's totally functionality and a viable choice for collecting POST values. What about [FromBody]? Web API also has a [FromBody] attribute that can be assigned to parameters. If you have multiple parameters on a Web API method signature you can use [FromBody] to specify which one will be parsed from the POST content. Unfortunately it's not terribly useful as it only returns content in raw format and requires a totally non-standard format ("=content") to specify your content. For more info in how FromBody works and several related issues to how POST data is mapped, you can check out Mike Stalls post: How WebAPI does Parameter Binding Not really sure where the Web API team thought [FromBody] would really be a good fit other than a down and dirty way to send a full string buffer. Extending Web API to make multiple POST Vars work? Don't think so Clearly there's no native support for multiple POST variables being mapped to parameters, which is a bit of a bummer. I know in my own work on one project my customer actually found this to be a real sticking point in their AJAX backend work, and we ended up not using Web API and using MVC JSON features instead. That's kind of sad because Web API is supposed to be the proper solution for AJAX backends. With all of ASP.NET Web API's extensibility you'd think there would be some way to build this functionality on our own, but after spending a bit of time digging and asking some of the experts from the team and Web API community I didn't hear anything that even suggests that this is possible. From what I could find I'd say it's not possible primarily because Web API's Routing engine does not account for the POST variable mapping. This means [HttpPost] methods with url encoded POST buffers are not mapped to the parameters of the endpoint, and so the routes would never even trigger a request that could be intercepted. Once the routing doesn't work there's not much that can be done. If somebody has an idea how this could be accomplished I would love to hear about it. Do we really need multi-value POST mapping? I think that that POST value mapping is a feature that one would expect of any API tool to have. If you look at common APIs out there like Flicker and Google Maps etc. they all work with POST data. POST data is very prominent much more so than JSON inputs and so supporting as many options that enable would seem to be crucial. All that aside, Web API does provide very nice features with Model Binding that allows you to capture many POST variables easily enough, and logistically this will let you build whatever you need with POST data of all shapes as long as you map objects. But having to have an object for every operation that receives a data input is going to take its toll in heavy AJAX applications, with a lot of types created that do nothing more than act as parameter containers. I also think that POST variable mapping is an expected behavior and Web APIs non-support will likely result in many, many questions like this one: How do I bind a simple POST value in ASP.NET WebAPI RC? with no clear answer to this question. I hope for V.next of WebAPI Microsoft will consider this a feature that's worth adding. Related Articles Passing multiple POST parameters to Web API Controller Methods Mike Stall's post: How Web API does Parameter Binding Where does ASP.NET Web API Fit?© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Excel VBA - How to copy/transpose multiple columns record into individual single row

  - by larry

  I'm working on data migration, need some help on doing a macro to copy/transpose multiple columns record into individual single row. There are also a "tag" in the first row, which indicates the columns that should not be included in the copy/transpose. From: Tag x Name Jan Feb Mar Apr Larry 2 20 34 56 Harry 3 45 77 88 Marry 5 66 44 33 To: Larry Jan 2 Larry Feb 20 Larry Apr 56 Harry Jan 3 Harry Feb 45 Harry Apr 88 Marry Jan 5 Marry Feb 66 Marry Apr 33 The "Mar" data was omitted due to there's a tag (X) above it. The data might be near hundred columns (few years), and some of the months need to be omitted. Any expert able to help on this? I had been spending whole day cracking my head on this. Worse come to worse I might have to manually copy and paste, that would probably took me a decade.

  Read the article

• eventmachine on debian fails install via rubygems

  - by Max

  this has been killing me for the last 5 hours. I don't seem to be able to get eventmachine running on my debian box. here this output: $ gem install thin Building native extensions. This could take a while... ERROR: Error installing thin: ERROR: Failed to build gem native extension. /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/bin/ruby extconf.rb checking for rb_trap_immediate in ruby.h,rubysig.h... no checking for rb_thread_blocking_region()... yes checking for inotify_init() in sys/inotify.h... yes checking for writev() in sys/uio.h... yes checking for rb_wait_for_single_fd()... yes checking for rb_enable_interrupt()... yes checking for rb_time_new()... yes checking for sys/event.h... no checking for epoll_create() in sys/epoll.h... yes creating Makefile make compiling kb.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from kb.cpp:20: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from kb.cpp:20: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from kb.cpp:20: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from kb.cpp:20: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type compiling rubymain.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from rubymain.cpp:20: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from rubymain.cpp:20: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from rubymain.cpp:20: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from rubymain.cpp:20: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type compiling ssl.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from ssl.cpp:23: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from ssl.cpp:23: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from ssl.cpp:23: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from ssl.cpp:23: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type compiling cmain.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from cmain.cpp:20: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from cmain.cpp:20: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from cmain.cpp:20: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from cmain.cpp:20: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type cmain.cpp:96: warning: type qualifiers ignored on function return type cmain.cpp:107: warning: type qualifiers ignored on function return type cmain.cpp:117: warning: type qualifiers ignored on function return type cmain.cpp:127: warning: type qualifiers ignored on function return type cmain.cpp:269: warning: type qualifiers ignored on function return type cmain.cpp:279: warning: type qualifiers ignored on function return type cmain.cpp:289: warning: type qualifiers ignored on function return type cmain.cpp:299: warning: type qualifiers ignored on function return type cmain.cpp:309: warning: type qualifiers ignored on function return type cmain.cpp:329: warning: type qualifiers ignored on function return type cmain.cpp:678: warning: type qualifiers ignored on function return type compiling em.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from em.cpp:23: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from em.cpp:23: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from em.cpp:23: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from em.cpp:23: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type em.cpp: In member function 'bool EventMachine_t::_RunEpollOnce()': em.cpp:578: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp:578: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp: In member function 'bool EventMachine_t::_RunSelectOnce()': em.cpp:974: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp:974: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp: At global scope: em.cpp:1057: warning: type qualifiers ignored on function return type em.cpp:1079: warning: type qualifiers ignored on function return type em.cpp:1265: warning: type qualifiers ignored on function return type em.cpp:1338: warning: type qualifiers ignored on function return type em.cpp:1510: warning: type qualifiers ignored on function return type em.cpp:1593: warning: type qualifiers ignored on function return type em.cpp:1856: warning: type qualifiers ignored on function return type em.cpp:1982: warning: type qualifiers ignored on function return type em.cpp:2046: warning: type qualifiers ignored on function return type em.cpp:2070: warning: type qualifiers ignored on function return type em.cpp:2142: warning: type qualifiers ignored on function return type em.cpp:2361: fatal error: error writing to /tmp/ccdlOK0T.s: No space left on device compilation terminated. make: *** [em.o] Error 1 Gem files will remain installed in /home/eventhub/.rvm/gems/ruby-1.9.3-p125/gems/eventmachine-1.0.1 for inspection. Results logged to /home/eventhub/.rvm/gems/ruby-1.9.3-p125/gems/eventmachine-1.0.1/ext/gem_make.out Any thoughts? I read a lot of different ways to solve this issue, but none of them worked. Thanks

  Read the article

• Convert Normalize table to Unormalize table

  - by M R Jafari

  I have tow tables, Table A has 3 columns as StudentID, Name, Course, ClassID and Table B has many columns as StudentID, Name, Other1, Other2, Other3 ... I want convert Table A to Table B. Please help me! Table A StudentID Name Course ClassID 85001 David Data Base 11 85001 David Data Structure 22 85002 Bob Math 33 85002 Bob Data Base 44 85002 Bob Data Structure 55 85002 Bob C# 66 85003 Sara C# 77 85003 Sara Data Base 88 85004 Mary Math 99 85005 Mary Math 100 … Table B SdentdID Name Other 1 Other 2 Other 3 Other 4 … 85001 David DBase,11 DS,22 85002 Bob Math,33 DB,44 DS,55 C#,66 85003 Sara C#,77 DBase,88 85004 Mary Math,99

  Read the article

• Storing a SHA512 Password Hash in Database

  - by Chris

  In my ASP.NET web app I'm hashing my user passwords with SHA512. Despite much SO'ing and Googling I'm unclear how I should be storing them in the database (SQL2005) - the code below shows the basics of how I'm creating the hash as a string and I'm currently inserting it into the database into a Char(88) column as that seems to be the length created consistently Is holding it as a String the best way to do it, if so will it always be 88 chars on a SHA512 (as I have seen some bizarre stuff on Google)? Dim byteInput As Byte() = Encoding.UTF8.GetBytes(sSalt & sInput) Dim hash As HashAlgorithm = New SHA512Managed() Dim sInsertToDatabase As String = Convert.ToBase64String(hash.ComputeHash(byteInput))

  Read the article

• How do I generate coverage xml report for a single package?

  - by Wraith

  I'm using nose and coverage to generate coverage reports. I only have one package right now, ae, so I specify to only cover that: nosetests -w tests/unit --with-xunit --with-coverage --cover-package=ae And here are the results, which look good: Name Stmts Exec Cover Missing ---------------------------------------------- ae 1 1 100% ae.util 253 224 88% 39, 63-65, 284, 287, 362, 406 ---------------------------------------------- TOTAL 263 234 88% ---------------------------------------------------------------------- Ran 68 tests in 5.292s However when I run coverage xml, coverage pulls in more packages than necessary, including python email and logging packages which have nothing to do with my code. If I run coverage xml ae, I get this error: No source for code: '/home/wraith/dev/projects/trimurti/src/ae': [Errno 21] Is a directory: '/home/wraith/dev/projects/trimurti/src/ae' Is there a way to generate the XML for just the ae package?

  Read the article

• sort the "rollup" in group by

  - by shantanuo

  I found that the "with rollup" option used with group by is very useful. But it does not behave with "order by" clause. Is there any way to order by the way I want as well as calculate the sub-totals? CREATE TABLE `mygroup` ( `id` int(11) default NULL, `country` varchar(100) default NULL ) ENGINE=MyISAM ; INSERT INTO `mygroup` VALUES (1,'India'),(5,'India'),(8,'India'),(18,'China'),(28,'China'),(28,'China'); mysql>select country, sum(id) from mygroup group by country with rollup; +---------+---------+ | country | sum(id) | +---------+---------+ | China | 74 | | India | 14 | | NULL | 88 | +---------+---------+ 3 rows in set (0.00 sec) mysql>select country, sum(id) as cnt from mygroup group by country order by cnt ; +---------+------+ | country | cnt | +---------+------+ | India | 14 | | China | 74 | +---------+------+ 2 rows in set (0.00 sec) mysql>select country, sum(id) as cnt from mygroup group by country with rollup order by cnt; ERROR 1221 (HY000): Incorrect usage of CUBE/ROLLUP and ORDER BY Expected Result: +---------+------+ | country | cnt | +---------+------+ | India | 14 | | China | 74 | | NULL | 88 | +---------+---------+ 3 rows in set (0.00 sec)

  Read the article

• for ps aux what are Ss Sl Ssl proccess types UNIX

  - by JiminyCricket

  when doing a "ps aux" command I get some process listed as Ss, Ssl and Sl what do these mean? root 24653 0.0 0.0 2256 8 ? Ss Apr12 0:00 /bin/bash -c /usr/bin/python /var/python/report_watchman.py root 24654 0.0 0.0 74412 88 ? Sl Apr12 0:01 /usr/bin/python /var/python/report_watchman.py root 21976 0.0 0.0 2256 8 ? Ss Apr14 0:00 /bin/bash -c /usr/bin/python /var/python/report_watchman.py root 21977 0.0 0.0 73628 88 ? Sl Apr14 0:01 /usr/bin/python /var/python/report_watchman.py

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >