Search Results

Search found 1557 results on 63 pages for 'daniel fukuda'.

Page 5/63 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• C++ Accelerated Massive Parallelism

  - by Daniel Moth

  At AMD's Fusion conference Herb Sutter announced in his keynote session a technology that our team has been working on that we call C++ Accelerated Massive Parallelism (C++ AMP) and during the keynote I showed a brief demo of an app built with our technology. After the keynote, I go deeper into the technology in my breakout session. If you read both those abstracts, you'll get some information about what C++ AMP is, without being too explicit since we published the abstracts before the technology was announced. You can find the official online announcement at Soma's blog post. Here, I just wanted to capture the key points about C++ AMP that can serve as an introduction and an FAQ. So, in no particular order… C++ AMP lowers the barrier to entry for heterogeneous hardware programmability and brings performance to the mainstream, without sacrificing developer productivity or solution portability. is designed not only to help you address today's massively parallel hardware (i.e. GPUs and APUs), but it also future proofs your code investments with a forward looking design. is part of Visual C++. You don't need to use a different compiler or learn different syntax. is modern C++. Not C or some other derivative. is integrated and supported fully in Visual Studio vNext. Editing, building, debugging, profiling and all the other goodness of Visual Studio work well with C++ AMP. provides an STL-like library as part of the existing concurrency namespace and delivered in the new amp.h header file. makes it extremely easy to work with large multi-dimensional data on heterogeneous hardware; in a manner that exposes parallelization. introduces only one core C++ language extension. builds on DirectX (and DirectCompute in particular) which offers a great hardware abstraction layer that is ubiquitous and reliable. The architecture is such, that this point can be thought of as an implementation detail that does not surface to the API layer. Stay tuned on my blog for more over the coming months where I will switch from just talking about C++ AMP to showing you how to use the API with code examples… Comments about this post welcome at the original blog.

  Read the article

• Speaking at AMD Fusion conference

  - by Daniel Moth

  Next Wednesday at 2pm I will be presenting a session at the AMD Fusion developer summit in Bellevue, Washington State. For more on this conference please visit the official website. If you filter the catalog by 'Speaker Last Name' to "Moth", you'll find my talk. For your convenience, below is the title and abstract Blazing-fast code using GPUs and more, with Microsoft Visual C++ To get full performance out of mainstream hardware, high-performance code needs to harness, not only multi-core CPUs, but also GPUs (whether discrete cards or integrated in the processor) and other compute accelerators to achieve orders-of-magnitude speed-up for data parallel algorithms. How can you as a C++ developer fully utilize all that heterogeneous hardware from your Visual Studio environment? How can your code benefit from this tremendous performance boost without sacrificing your developer productivity or the portability of your solution? The answers will be presented in this session that introduces a new technology from Microsoft. Hope to see many of you there! Comments about this post welcome at the original blog.

  Read the article

• Heading to GTC 2010

  - by Daniel Moth

  Next week the GPU Technology Conference (GTC) 2010 takes place in San Jose, CA and I am lucky enough to be attending the entire week. It has been an extremely long time (in fact, I can't remember the last time) where I am registered as an attendee at a conference (full pass/access) without being a speaker *and* without having any booth duty! Having said that, we (our team at Microsoft) will be running GPU debugging UX studies throughout the entire week (similar to what I had previously advertised). If you are attending GTC 2010 and you are interested, look for the related flyer in your conference bag. The conference is an excellent opportunity to connect in-person with various individuals that I have only met virtually. From an educational perspective there is a very long and interesting session list, with multiple concurrent slots, making it very hard to choose between them, but I have managed to create my (packed) schedule. I am most looking forward to sessions on the programming languages and tools, both from Microsoft and MS partners. For full conference details, visit the GTC 2010 official page. Comments about this post welcome at the original blog.

  Read the article

• Join our team at Microsoft

  - by Daniel Moth

  If you are looking for a SDE or SDET job at Microsoft, keep on reading. Back in January I posted a Dev Lead opening on our team, which was quickly filled internally (by Maria Blees). Our team is part of the recently announced Microsoft Technical Computing group. Specifically, we are working on new debugger functionality, integrated with Visual Studio (we are starting work on the next version), aimed to address HPC and GPGPU scenarios (and continuing the Parallel Debugging scenarios we started addressing with VS2010). We now have many more openings on our debugger team. We posted three of those on the careers website: Software Development Engineer Software Development Engineer II Software Development Engineer in Test II (don't let the word "Test" fool you: An SDET on our team is no different than a developer in any way, including the skills required) Please do read the contents of the links above. Specifically, note that for both positions you need to be as proficient in writing C++ code as you are with managed code (WPF experience is a plus). If you think you have what it takes, you wish to join a quality and schedule driven project, and want to contribute features to a product that has global impact, then send me your resume and I'll pass it on to the hiring managers. Comments about this post welcome at the original blog.

  Read the article

• User eXperience

  - by Daniel Moth

  The last few months I have been spending a lot of time designing (and help design) the developer experience for the areas I contribute to (in future versions of Visual Studio). As a technical person who defines feature sets, it is easy to get engulfed in the pure technical side of things and ignore the details that ultimately make users "love" using the product to achieve their goal, instead of just "having to use" it. Engaging in UX design helps me escape that trap. In case you are also interested in the UX side of development, I thought I'd share an interesting site I came across: UX myths. In particular, I recommend reading myths 9, 10, 12, 13, 14, 15 and 21. Let me know if there are other UX resources you recommend… Comments about this post welcome at the original blog.

  Read the article

• "Hello World" in C++ AMP

  - by Daniel Moth

  Some say that the equivalent of "hello world" code in the data parallel world is matrix multiplication :) Below is the before C++ AMP and after C++ AMP code. For more on what it all means, watch the recording of my C++ AMP introduction (the example below is part of the session). void MatrixMultiply(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W ) { for (int y = 0; y < M; y++) { for (int x = 0; x < N; x++) { float sum = 0; for(int i = 0; i < W; i++) { sum += vA[y * W + i] * vB[i * N + x]; } vC[y * N + x] = sum; } } } Change the function to use C++ AMP and hence offload the computation to the GPU, and now the calling code (which I am not showing) needs no changes and the overall operation gives you really nice speed up for large datasets…  #include <amp.h> using namespace concurrency; void MatrixMultiply(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W ) { array_view<const float,2> a(M, W, vA); array_view<const float,2> b(W, N, vB); array_view<writeonly<float>,2> c(M, N, vC); parallel_for_each( c.grid, [=](index<2> idx) mutable restrict(direct3d) { float sum = 0; for(int i = 0; i < a.x; i++) { sum += a(idx.y, i) * b(i, idx.x); } c[idx] = sum; } ); } Again, you can understand the elements above, by using my C++ AMP presentation slides and recording… Stay tuned for more… Comments about this post welcome at the original blog.

  Read the article

• C++ AMP recording and slides

  - by Daniel Moth

  Yesterday we announced C++ Accelerated Massive Parallelism. Many of you want to know more about the API instead of just meta information. I will trickle more code over the coming months leading up to the date when we will share actual bits. Until you have bits in your hand, it is only your curiosity that is blocked, so I ask you to be patient with that and allow me to release this on our own schedule ;-) You can now watch my 45-minute session introducing C++ AMP on channel9. You will also want to download the slides (pdf), because they are not readable in the recording. Comments about this post welcome at the original blog.

  Read the article

• How to hide items under the options from one select box upon selection of an item in another select

  - by jl

  Hi, I am new to jQuery and would like to know how is it possible for me to hide an option in a selection box based on the selection of another selection box. I have 5 selection boxes, this is for the administrator to select the users of a limited criteria. The <options> are create dynamically from the results of a database query and php, and they all have the same <options>. e.g. this is an example of the selection boxes with their option values. userbox1 - Amy, Bosh, Cathy, Daniel, Ethan userbox2 - Amy, Bosh, Cathy, Daniel, Ethan userbox3 - Amy, Bosh, Cathy, Daniel, Ethan userbox4 - Amy, Bosh, Cathy, Daniel, Ethan userbox5 - Amy, Bosh, Cathy, Daniel, Ethan So if the administrator selects Cathy in userbox1, Cathy will be automatically be hidden from the selection on the rest of the userbox. And if the administrator changes his/her mind and reselect another user call Ethan. The userboxes should be able to show the availability of Cathy in the selection. I am not sure is hide/show the correct status to be used in such cases. May I know how is it possible to write the function as stated above? If I am missing some current references, kindly point me to it. Thanks in advance.

  Read the article

• Problem with RVM and gem that has an executable

  - by djhworld

  Hi there, I've recently made the plunge to use RVM on Ubuntu. Everything seems to have gone swimmingly...except for one thing. I'm in the process of developing a gem of mine that has a script placed within its own bin/ directory, all of the gemspec and things were generated by Jeweler. The bin/mygem file contains the following code: - #!/usr/bin/env ruby begin require 'mygem' rescue LoadError require 'rubygems' require 'mygem' end app = MyGem::Application.new app.run That was working fine on the system version of Ruby. Now...recently I've moved to RVM to manage my ruby versions a bit better, except now my gem doesn't appear to be working. Firstly I do this: - rvm 1.9.2 Then I do this: - rvm 1.9.2 gem install mygem Which installs fine, except...when I try to run the command for mygem mygem I just get the following exception: - daniel@daniel-VirtualBox:~$ mygem <internal:lib/rubygems/custom_require>:29:in `require': no such file to load -- mygem (LoadError) from <internal:lib/rubygems/custom_require>:29:in `require' from /home/daniel/.rvm/gems/ruby-1.9.2-p136/gems/mygem-0.1.4/bin/mygem:2:in `<top (required)>' from /home/daniel/.rvm/gems/ruby-1.9.2-p136/bin/mygem:19:in `load' from /home/daniel/.rvm/gems/ruby-1.9.2-p136/bin/mygem:19:in `<main>'mygem NOTE: I have a similar RVM setup on MAC OSX and my gem works fine there so I think this might be something to do with Ubuntu?

  Read the article

• Upgrade Ubuntu 11.10 to 12.10

  - by Daniel Minassian

  To whoever can help, I want to update the ubuntu on my laptop to 12.10 from the current version 11.10, when i click on the update manager i get a partial update gui, if i click cancel on that i get the gui for update which has three buttons check, install updates and upgrade. The upgrade button upgrades only to 12.04.1.LTS, when i press check it checks and gives me this error "W:Failed to fetch h t t p://lb.archive.ubuntu.com/ubuntu/dists/precise/main/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_main_i18n_Index , W:Failed to fetch h t t p://lb.archive.ubuntu.com/ubuntu/dists/precise/multiverse/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_multiverse_i18n_Index , W:Failed to fetch http://lb.archive.ubuntu.com/ubuntu/dists/precise/restricted/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_restricted_i18n_Index , W:Failed to fetch http://lb.archive.ubuntu.com/ubuntu/dists/precise/universe/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_universe_i18n_Index , E:Some index files failed to download. They have been ignored, or old ones used instead." Thank you for your time and help, Daniel Minassian

  Read the article

• Network does not connect at boot

  - by Daniel Svozil

  I am on Ubuntu 12.04, fresh install. When I boot a machine, the boot screen says Connecting to network, later it is changed to something like Did not connect, trying for another 60s. However, the network does not connect at the boot. But I can then log in without a network connection, and if I start a network manager service manually from the terminal (sudo service network-manager start), the network is connected without any problems. Please, does anybody know where the problem could be? I don't want to wait more than two minutes every computer restart :-). I am new to Ubuntu (and also to upstart) so I am a bit lost. There is no /var/log/messages, in dmesg I found this record, though it may not be related: init: network-interface (eth1) pre-start process (492) terminated with status 1 init: network-interface (eth1) post-stop process (548) terminated with status 1 Thanks Daniel

  Read the article

• Adjust Terminal - (Arch-like Info-Screen)

  - by Daniel

  I use Ubuntu for many years but recently I discovered a nice feature in Arch. It is common to display system-information on headless servers on ssh-login, on Ubuntu its the landscape- package. I wounded if it's possible to create the same for the normal terminal in Ubuntu . Like the terminal in Arch I think it might be useful to have this information displayed, at the time one starts the terminal. Is it possible to create something like this for the terminal, and if so what would you suggest? I tried motd but these messages were not displayed. Daniel

  Read the article

• Window Servers 2003 Security After Support Lifecycle

  - by Daniel Fukuda

  Hello, I wanted to ask if let's say that Microsoft has stopped supporting Windows Server 2003 now so there is no any security updates and I use that system for Domain Controller (Windows XP/7 Professional Clients) and File Server only + I'm using ESET NOD23 AntiVirus. Will my system be secure? I'm asking because I don't surf internet on that system nor I will install/open any programs/documents and that server is connected to router without any open ports. "On July 14, 2015, all Windows 2003 support, including security updates and security-related hotfixes, will be terminated."

  Read the article

• Microsoft Exchange mail features and AD question

  - by Daniel Fukuda

  Hello, I wanted to ask is there a feature that allows Microsoft Exchange to download emails through POP3 from another mail provider like Google Apps (Gmail for your own domain), then store it and allowing users to download (POP3/IMAP) emails to Outlook/Live Mail. So I want to Microsoft Exchange to become like middle mail provider. My another question is regarding Microsoft Server Active Directory, is Windows Server 2008 Active Directory working with Windows XP Professional and is there any new feature added to Win2k8 AD?

  Read the article

• Mail Server with Google Apps

  - by Daniel Fukuda

  Hello, Is there any mail server that has a feature to download (POP3) emails from another mail server like Google Apps (Gmail for your own domain), store it and then allow to users to download (POP3/IMAP) emails to their own mail client like Outlook/Live Mail? So I want it to become like a "middle mail server". I hope you guys understand it. My main reason to do so is that Google Apps got limited space for each mailbox and I also want to have emails in one space so its easy to archive and backup.

  Read the article

• Allow Incoming Responses from Curl On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms Thanks in Advance

  Read the article

• Game editor integration with the engine?

  - by Daniel

  What I am trying to figure out is what is the best way to integrate the editor(level, effects, model, etc...) in the most effective way? Now the first thing I thought would be to create the game engine(*) extremely modular. For example I took the example of game states. You could have multiple game states that all have their own update() and draw() methods among others. Each game state class would inherit from a base GameState class. This allows for a more modular approach and a useful one at that. Now would the most efficient approach be to implement the editor along with the modular engine, or create two different designs for both the game, and editor? I thought to take the game state example and extend it to window states, and well could be used for a lot more systems. Is there a better implementation of this design(game state) for use in other systems used in the engine? *: Now I know the term game engine is sorta irrelevant, and misused in many situations. What I am referring to as the "game engine" is the combination of the systems that the game must interact with for short. Also this is more of a theory / design question than an implementation. Even though both mix, i'd rather like to have a more general idea on how the editor is built in an efficient way and still using the same engine code as what the game uses. Thanks, Daniel P.S If you need more clarification or extra bits just leave a comment.

  Read the article

• How To Scale Canvas In Android

  - by Daniel Braithwaite

  I am writing a android game using Canvas as the way to draw everything, the problem is that when i run it on different android phones the canvas dosn't change size i tried using canvas.scale() but that didn't make a i difference. The code i use for drawing is ... public void draw( Canvas c, int score ) { Obstical2[] obstmp = Queue.toArray(this.o); Coin[] cointmp = QueueC.toArray(this.c); for( int i = 0; i < obstmp.length; i++ ) { obstmp[i].draw(c); } for( int i = 0; i < cointmp.length; i++ ) { cointmp[i].draw(c); } c.drawText(String.format("%d", score ), 20, 50, textPaint); if( isWon && isStarted ) c.drawText("YOU WON", 20, 400, resPaint); else if( isLost && isStarted ) c.drawText("YOU LOST", 20, 400, resPaint); } The function above calls the draw functions for the entity's on the screen, theses function are as follows Draw Function For Obstical : public void draw( Canvas c ) { Log.i("D", "COIN"); coin.draw(c); } Draw Function For Coin : public void draw( Canvas c ) { obstical.draw(c); } How could i make the canvas re-size to it would look the same on any screen ? Cheers Daniel

  Read the article

• Set default owner/user

  - by Daniel Hollands

  I'm a web developer, and so have set-up an old machine in the office as an Ubuntu Server, for the purposes of testing websites. I've set-up LAMP and have created a /var/www folder, from which all my local sites are served. The issue is that of user permissions, i.e. any files that I copy into that folder (from my Windows machine via the network) automatically take on me (daniel) as their owner. The problem is that I want www-data to become the owner. I did some research and saw that it should be possible to use setuid (and setgid) to automatically set www-data as the owner of all files put into /var/www automatically, so far I've not had any luck making it work. Can someone help please? Thank you UPDATE: Would this do what I want it to do? Default file permissions for php user www-data UPDATE 2: I've kinda fixed my issue by changing my samba settings. Using Webmin, I was able to go in and change the default settings (as seen here: http://imageshack.us/photo/my-images/521/captureon.png/)

  Read the article

• Show Notes: Getting Past the Cloud Hype

  - by Bob Rhubart

  This week’s ArchBeat podcast features an unvarnished bit of conversation culled from a recent virtual meet-up. These meet-ups are informal conversations among architects, many of who have participated in previous ArchBeat programs. There’s no prearranged topic, so the participants talk about whatever is on their minds. The most recent meet-up included Oracle ACE Director Ran Batra, director of cloud computing product development with AT&T, and Daniel Templeton, principal product manager for Oracle Grid Engine, and the man behind Dan T’s GridBlog. The conversation took place at the end of the year – and the end of the decade – a time when most tech publications feature their predictions for the coming year.  I wanted a different spin on that theme, so I asked Ron and Dan to talk about the technologies about which they weren’t all that optimistic.   I found that ten-minute chunk of conversation particularly interesting, so that’s what you’re going to hear this week. Listen Get Social If you have questions or comment for Ron and/or Daniel you can connect via the following: Ron Batra Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Daniel Templeton Blog | Twitter | LinkedIn Coming Up Oracle ACE Director Debra Lilley talks about her role in the UKOUG’s development group and that group’s collaboration with Oracle on Oracle Fusion Applications. Dr Frank Munz, author of Middleware and Cloud Computing: Oracle Fusion Middleware on Amazon Web Services and Rackspace Cloud. Stay tuned: http://feeds2.feedburner.com/OtnArch2ArchRSS   del.icio.us Tags: oracle,oracle technology network,archbeat,cloud computing,software architect,podcast Technorati Tags: oracle,oracle technology network,archbeat,cloud computing,software architect,podcast

  Read the article

• IE9 GPO Setting "Configure Tracking Protection Lists"

  - by Daniel B

  I've just installed IE9 on my workstations and Server in our network. According to technet article http://technet.microsoft.com/en-us/library/gg699401.aspx There is a GPO setting for IE9 called "Configure Tracking Protection Lists" located at Windows Components\Internet Explorer\Privacy in the admistrative templates. I can find all the other IE9 settings in the GPO, but I cannot find this one. Does anyone know if there is an updated template, or if this setting was removed from the RC version of IE9? Thanks, Daniel

  Read the article

• how to set php SERVER_PORT var to 80, behind varnish?

  - by Daniel

  how to force php to read SERVER_PORT as 80, when apache listens on 8080 and varnish listens on 80 ?? if my apache vhost is set to 8080, SERVER_PORT will always be 8080, this is troubling me a little since in many parts of the application some links are calculated with SERVER_NAME and SERVER_PORT together, .. so what I need is that php "believes" that SERVER_PORT is 80, so all links will pass trough varnish regards Daniel

  Read the article

• Have to dhclient each restart to access internet

  - by Zeophlite

  So each time I restart my ubuntu server (virtual 10.04, via Xencenter), I have to call dhclient before I can access the internet: http://img813.imageshack.us/i/dhclient.png/ What do I need to change to get internet access automatically? Apologies for posting images, I'm using Xencenter, so I can't copy/paste the console output EDIT:: daniel@workwork:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.69.136 netmask 255.255.255.0 network 192.168.69.0 broadcast 192.168.69.255 gateway 192.168.69.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.69.120 dns-search workwork.com.au daniel@workwork:~$ ifconfig eth0 Link encap:Ethernet HWaddr ae:11:14:22:0a:03 inet6 addr: fe80::ac11:14ff:fe22:a03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:85 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10496 (10.4 KB) TX bytes:13086 (13.0 KB) Interrupt:32 Base address:0x6000 eth1 Link encap:Ethernet HWaddr b2:2c:40:f2:a0:fa inet addr:192.168.69.167 Bcast:192.168.69.255 Mask:255.255.255.0 inet6 addr: fe80::b02c:40ff:fef2:a0fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13448 errors:0 dropped:0 overruns:0 frame:0 TX packets:3100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7679428 (7.6 MB) TX bytes:282286 (282.2 KB) Interrupt:36 Base address:0xa100 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:179 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:36905 (36.9 KB) TX bytes:36905 (36.9 KB) daniel@workwork:/var/lib/dhcp3$ cat dhclient.leases lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 07:36:53; rebind 5 2011/03/18 11:35:39; expire 5 2011/03/18 12:35:39; } lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 08:51:58; rebind 5 2011/03/18 12:24:16; expire 5 2011/03/18 13:24:16; } daniel@workwork:/var/lib/dhcp3$ cat dhclient.eth0.leases daniel@workwork:/var/lib/dhcp3$ ifconfig eth1 before and after dhclient http://img692.imageshack.us/i/prepost.png/

  Read the article

• Silverlight Cream for January 15, 2011 -- #1028

  - by Dave Campbell

  Note to #1024 Swag Winners: I'm sending emails to the vendors Sunday night, thanks for your patience (a few of you have not contacted me yet) In this Issue: Ezequiel Jadib, Daniel Egan(-2-), Page Brooks, Jason Zander, Andrej Tozon, Marlon Grech, Jonathan van de Veen, Walt Ritscher, Jesse Liberty, Jeremy Likness, Sacha Barber, William E. Burrows, and WindowsPhoneGeek. Above the Fold: Silverlight: "Building a Radar Control in Silverlight - Part 1" Page Brooks WP7: "Tutorial: Dynamic Tile Push Notification for Windows Phone 7" Jason Zander Training: "WP7 Unleashed Session I–Hands on Labs" Daniel Egan From SilverlightCream.com: Silverlight Rough Cut Editor SP1 Released Ezequiel Jadib has an announcement about the Rough Cut Editor SP1 release, and he walks you through the content, installation and a bit of the initial use. WP7 Unleashed Session I–Hands on Labs Daniel Egan posted Part 1 of 3 of a new WP7 HOL ... video online and material to download... get 'em while they're hot! WP7 Saving to Media Library Daniel Egan has another post up as well on saving an image to the media library... not the update from Tim Heuer... all good info Building a Radar Control in Silverlight - Part 1 This freakin' cool post from Page Brooks is the first one of a series on building a 'Radar Control' in Silverlight ... seriously, go to the bottom and run the demo... I pretty much guarantee you'll take the next link which is download the code... don't forget to read the article too! Tutorial: Dynamic Tile Push Notification for Windows Phone 7 Jason Zander has a nice-looking tutorial up on dynamic tile notifications... good diagrams and discussion and plenty of code. Reactive.buffering.from event. Andrej Tozon is continuing his Reactive Extensions posts with this one on buffering: BufferWithTime and BufferWIthCount ... good stuff, good write-up, and the start of a WP7 game? MEFedMVVM with PRISM 4 Marlon Grech combines his MEFedMVVM with Prism 4, and says it was easy... check out the post and the code. Adventures while building a Silverlight Enterprise application part #40 Jonathan van de Veen has a discussion up about things you need to pay attention to as your project gets close to first deployment... lots of good information to think about Silverlight or not. Customize Windows 7 Preview pane for XAML files Walt Ritscher has a (very easy) XAML extension for Windows 7 that allows previewing of XAML files in an explorer window... as our UK friends say "Brilliant!" Entity Framework Code-First, oData & Windows Phone Client From the never-ending stream of posts that is Jesse Liberty comes this one on EF Code-First... so Jesse's describing Code-First and OData all wrapped up about a WP7 app Sterling Silverlight and Windows Phone 7 Database Triggers and Auto-Identity Sterling and Database Triggers sitting in a tree... woot for WP7 from Jeremy Likness... provides database solutions including Validation, Data-specific concerns such as 'last modified', and post-save processing ... all good, Jeremy! A Look At Fluent APIs Sacha Barber has a great post up that isn't necessarily Silverlight, but is it? ... we've been hearing a lot about Fluent APIs... read on to see what the buzz is. Windows Phone 7 - Part 3 - Final Application William E. Burrows has Part 3 of his WP7 tutorial series up... this one completing the Golf Handicap app by giving the user the ability to manage scores. User Control vs Custom Control in Silverlight for WP7 WindowsPhoneGeek has a great diagram and description-filled post up on User Controls and Custom Controls in WP7... good external links too. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• How to model has_many with polymorphism?

  - by Daniel Abrahamsson

  I've run into a situation that I am not quite sure how to model. Suppose I have a User class, and a user has many services. However, these services are quite different, for example a MailService and a BackupService, so single table inheritance won't do. Instead, I am thinking of using polymorphic associations together with an abstract base class: class User < ActiveRecord::Base has_many :services end class Service < ActiveRecord::Base validates_presence_of :user_id, :implementation_id, :implementation_type belongs_to :user belongs_to :implementation, :polymorphic = true delegate :common_service_method, :name, :to => :implementation end #Base class for service implementations class ServiceImplementation < ActiveRecord::Base validates_presence_of :user_id, :on => :create has_one :service, :as => :implementation has_one :user, :through => :service after_create :create_service_record #Tell Rails this class does not use a table. def self.abstract_class? true end #Default name implementation. def name self.class.name end protected #Sets up a service object def create_service_record service = Service.new(:user_id => user_id) service.implementation = self service.save! end end class MailService < ServiceImplementation #validations, etc... def common_service_method puts "MailService implementation of common service method" end end #Example usage MailService.create(..., :user_id => user.id) BackupService.create(...., :user_id => user.id) user.services.each do |s| puts "#{user.name} is using #{s.name}" end #Daniel is using MailService, Daniel is using BackupService So, is this the best solution? Or even a good one? How have you solved this kind of problem?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >