Search Results

Search found 118 results on 5 pages for 'dexterous stranger'.

Page 5/5 | < Previous Page | 1 2 3 4 5 

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• Cygwin's RSYNC for large data transfer

  - by Tim Brigham

  I'm using rsync from Cygwin to do a large scale data transfer from an aging HP MSA 1000 to a new DAS attached to a different server. I have a daemon running on the remote server in read only mode and a local copy writing the files to disk. One of my servers is an image repository with over a million files spread across about 300 directories. Each file averages only a couple hundred kilobytes. More so than any other box this one is proving problematic. The rsync process will work for a while - some times 20 minutes, some times an hour - and then it simply quits and sits idle at a given file name. I have verified that the file isn't corrupt on the remote server and that the file is successfully created on the local drive. I ran the rsync client in -vv mode, which returns nothing. I checked out the logs created by the daemon. I looked at the network utilization on the interface, which is sitting idle. I looked at the AV settings to see if anything could pose a problem there. I even updated to the latest release of Cygwin. What do I need to in order to keep this connection up? EDIT: The client system is using the command rsync.exe server::Drives/f/Repo/ /cygdrive/T/Repo --archive -P -vv The server is using the command rsync.exe --daemon --no-detach --config "rsyncd.conf" The contents of rsyncd.conf: use chroot = false strict modes = false hosts allow = 192.168.100.9 log file = c:/rsyncd.log uid=0 gid=0 [Drives] path = /cygdrive read only = yes EDIT: The file server is 2003, the disk type on the array is GPT and the size is of the array is about 4 TB. EDIT: Stranger.. It looks like the process is reliably erroring out at about 175,000 files. Rsync runs fine when I pick the same directory it has problems with one at a time. EDIT: rsync version 3.0.9 protocol version 30 Copyright (C) 1996-2011 by Andrew Tridgell, Wayne Davison, and others. Web site: http://rsync.samba.org/ Capabilities: 64-bit files, 64-bit inums, 32-bit timestamps, 64-bit long ints, no socketpairs, hardlinks, symlinks, IPv6, batchfiles, inplace, append, ACLs, xattrs, iconv, symtimes A similar failure occurred when going from the same set of files with Cygwin to a Linux install. It didn't happen until several hours later than normal however.

  Read the article

• hyperv machine guest loads slow

  - by Dani Avni

  this is by far one of the strangest things I have seen. I have a win 2008R2 cluster with a CSV. the CSV itself is on an iSCSI storage (hitachi HUS 110) basic config of the two hosts in the cluster is Dell R610 Win 2008 R2 with all patches 64GB 1 NIC for host access 2 NICs for guest access 2 NICs for iSCSI these machine work great and I can load a 2008R2 test guest machine on them in less than 90 seconds after the above config is running for over a year, I now need to add a new host. now the host is Dell R620 (Still intel but different CPU) Win 2008 R2 with all patches 64GB 1 NIC for host access 2 NICs for guest access 2 NICs for iSCSI I added this new host to the domain and to the cluster, I gave it access to the CSV and I tried loading the same guest machine that loads in 90 seconds in the other hosts. the machine loads in about 6 minutes. no matter how many times I try this the old hosts load the machine in about 90 seconds and this new host in around 6 minutes to eliminate any problems with the iSCSI connection, I added a new LUN and directly accessed it from the new host and I was working at around 300MB/s so no problem there. I also tested the connection between the other hosts and the new one and network is working fine there too. to eliminate problems in HyperV, I copied the machine to the local disk of the new host and it loaded in less than 20 seconds. now is the point were things get a lot stranger: in my tests I tried installing a fresh windows guest machine to the CSV from the new host. I noticed that while the fresh windows was installing, my test guest was loading in less than 90 seconds even on the new host (I repeated this a few times). If I paused the fresh install guest and tried loading the test guest again it loaded in 6 minutes. and again after I resumed the guest installation the test guest loaded fast. after the fresh windows was also loaded, I ran tests loading the fresh window and my test machine. each one of them loaded in about 5 minutes when I tried loading them separately. however when I started both of them in the same time they both loaded in around 2.5 minutes it seems that the iSCSI disk access is only working if it is under some load (although I never got to above 10% utilization according to the task manager) does anyone have any idea what could be the problem?

  Read the article

• Subterranean IL: Generics and array covariance

  - by Simon Cooper

  Arrays in .NET are curious beasts. They are the only built-in collection types in the CLR, and SZ-arrays (single dimension, zero-indexed) have their own commands and IL syntax. One of their stranger properties is they have a kind of built-in covariance long before generic variance was added in .NET 4. However, this causes a subtle but important problem with generics. First of all, we need to briefly recap on array covariance. SZ-array covariance To demonstrate, I'll tweak the classes I introduced in my previous posts: public class IncrementableClass { public int Value; public virtual void Increment(int incrementBy) { Value += incrementBy; } } public class IncrementableClassx2 : IncrementableClass { public override void Increment(int incrementBy) { base.Increment(incrementBy); base.Increment(incrementBy); } } In the CLR, SZ-arrays of reference types are implicitly convertible to arrays of the element's supertypes, all the way up to object (note that this does not apply to value types). That is, an instance of IncrementableClassx2[] can be used wherever a IncrementableClass[] or object[] is required. When an SZ-array could be used in this fashion, a run-time type check is performed when you try to insert an object into the array to make sure you're not trying to insert an instance of IncrementableClass into an IncrementableClassx2[]. This check means that the following code will compile fine but will fail at run-time: IncrementableClass[] array = new IncrementableClassx2[1]; array[0] = new IncrementableClass(); // throws ArrayTypeMismatchException These checks are enforced by the various stelem* and ldelem* il instructions in such a way as to ensure you can't insert a IncrementableClass into a IncrementableClassx2[]. For the rest of this post, however, I'm going to concentrate on the ldelema instruction. ldelema This instruction pops the array index (int32) and array reference (O) off the stack, and pushes a pointer (&) to the corresponding array element. However, unlike the ldelem instruction, the instruction's type argument must match the run-time array type exactly. This is because, once you've got a managed pointer, you can use that pointer to both load and store values in that array element using the ldind* and stind* (load/store indirect) instructions. As the same pointer can be used for both input and output to the array, the type argument to ldelema must be invariant. At the time, this was a perfectly reasonable restriction, and maintained array type-safety within managed code. However, along came generics, and with it the constrained callvirt instruction. So, what happens when we combine array covariance and constrained callvirt? .method public static void CallIncrementArrayValue() { // IncrementableClassx2[] arr = new IncrementableClassx2[1] ldc.i4.1 newarr IncrementableClassx2 // arr[0] = new IncrementableClassx2(); dup newobj instance void IncrementableClassx2::.ctor() ldc.i4.0 stelem.ref // IncrementArrayValue<IncrementableClass>(arr, 0) // here, we're treating an IncrementableClassx2[] as IncrementableClass[] dup ldc.i4.0 call void IncrementArrayValue<class IncrementableClass>(!!0[],int32) // ... ret } .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } And the result: Unhandled Exception: System.ArrayTypeMismatchException: Attempted to access an element as a type incompatible with the array. at IncrementArrayValue[T](T[] arr, Int32 index) at CallIncrementArrayValue() Hmm. We're instantiating the generic method as IncrementArrayValue<IncrementableClass>, but passing in an IncrementableClassx2[], hence the ldelema instruction is failing as it's expecting an IncrementableClass[]. On features and feature conflicts What we've got here is a conflict between existing behaviour (ldelema ensuring type safety on covariant arrays) and new behaviour (managed pointers to object references used for every constrained callvirt on generic type instances). And, although this is an edge case, there is no general workaround. The generic method could be hidden behind several layers of assemblies, wrappers and interfaces that make it a requirement to use array covariance when calling the generic method. Furthermore, this will only fail at runtime, whereas compile-time safety is what generics were designed for! The solution is the readonly. prefix instruction. This modifies the ldelema instruction to ignore the exact type check for arrays of reference types, and so it lets us take the address of array elements using a covariant type to the actual run-time type of the array: .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 readonly. ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } But what about type safety? In return for ignoring the type check, the resulting controlled mutability pointer can only be used in the following situations: As the object parameter to ldfld, ldflda, stfld, call and constrained callvirt instructions As the pointer parameter to ldobj or ldind* As the source parameter to cpobj In other words, the only operations allowed are those that read from the pointer; stind* and similar that alter the pointer itself are banned. This ensures that the array element we're pointing to won't be changed to anything untoward, and so type safety within the array is maintained. This is a typical example of the maxim that whenever you add a feature to a program, you have to consider how that feature interacts with every single one of the existing features. Although an edge case, the readonly. prefix instruction ensures that generics and array covariance work together and that compile-time type safety is maintained. Tune in next time for a look at the .ctor generic type constraint, and what it means.

  Read the article

• Crazy VS Designer Errors

  - by BlueRaja

  Here's a strange one. After renaming a class, one of my forms began giving me errors in the designer, refusing to open. Funny thing is, the form worked just fine when I ran the program. I began reverting my changes to deduce the problem. I have now reverted completely back to the last commit - in which I know the form was working in the designer - cleaned the solution, and deleted the bin/ and obj/ folders, as well as the *.suo file for good measure. The form still does not display in designer. Here are the errors it gives: Could not find 'MyNamespace.MyControl'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built. The variable 'myControl1' is either undeclared or was never assigned. The variable is both declared and assigned, and MyControl builds fine (again, the form works fine when the program is actually run). Stranger still, if I try to create a new form and drag a MyControl onto it, I get this Entity-Framework error: Failed to create component 'MyControl'. The error message follows: 'System.ArgumentException: The specified named connection is either not found in the configuration, not intended to be used with the EntityClient provider, or not valid. at System.Data.EntityClient.EntityConnection.ChangeConnectionString(String newConnectionString) at System.Data.EntityClient.EntityConnection..ctor(String connectionString) at System.Data.Objects.ObjectContect.CreateEntityConnection(String connectionString) etc. etc. There is nothing wrong with my connection string: it worked before, and, again, it works when I actually run the program (the control already exists on the old form from the previous commit). Any ideas whatsoever? I am completely at a loss. [Edit] The only significant code: MyControl.cs public MyControl() { _entities = new MyEFEntities(); //Entity-framework generated class } MyForm.Designer.cs private void InitializeComponent() { this.myControl1 = new MyNamespace.MyControl(); ... this.Controls.Add(this.myControl1); } MyEFDatabase.Designer.cs public MyEFEntities() : base("name=MyEFEntities", "MyEFEntities") { ... } App.Config <connectionStrings> <add name="MyEFEntities" connectionString="metadata=res://*/MyEFDatabase.csdl|res://*/MyEFDatabase.ssdl|res://*/MyEFDatabase.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=MyDatabaseServer;Initial Catalog=MyDatabase;Integrated Security=True;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> I've tried the "replace &quot; with '" trick - didn't help. [Edit2] It is happening to new projects also, but not immediately. Only after fiddling around a bit (it has something to do with adding a many-to-one relationship that EF did not figure out on its own), but I can't figure out the exact steps to reproduce.

  Read the article

• OSGI classcast exception on felix

  - by Nico

  Hi, i'm fairly new to osgi and am trying to get a functional proof of concept together. The setup is that my common api is created in a bundle creatively named common-api.jar with no bundle activator, but it exports all it's interfaces. the one of interest in this situation is DatabaseService.java. I then have a Second bundle called systemx-database-service. That implements the database service interface. this works fine as in the activator of the implementation bundle i test the connection to the database and select some arbitraty values. I also register the service i want to be available to the other bundle's like so: context.registerService(DatabaseService.class.getName(), new SystemDatabaseServiceImpl(context), new Properties()); The basic idea being when you look for a service reference for a Database service you'll get back the SystemDatabaseService implementation. When i do a inspect service the output it this: -> inspect s c 69 System Database Service (69) provides services: ---------------------------------------------- objectClass = za.co.xxx.xxx.common.api.DatabaseService service.id = 39 which would lead me to believe that if i do this in a test bundle: context.getService(context.getServiceReference(DatabaseService.class)); i should get back an instance of DatabaseService.class, but alas no such luck. it simply seems like it cannot find the service. stick with me here my story gets stranger. figuring there is no where to go but up i wrote this monstrosity: for (Bundle bundle : bundles) { if (bundle.getSymbolicName().equals("za.co.xxx.xxx.database-service")) { ServiceReference[] registeredServices = bundle.getRegisteredServices(); for (ServiceReference ref : registeredServices) { DatabaseService service = (DatabaseService) context.getService(ref); // use service here. } } } } now i can actually see the service reference, but i get this error java.lang.ClassCastException: za.co.xxx.xxx.database.service.impl.SystemDatabaseServiceImpl cannot be cast to za.co.xxx.xx.common.api.DatabaseService which is crazy since the implementation clearly implements the interface! Any help would be appreciated. Please keep in mind i'm very new at the osgi way of thinking so my whole approach here might be flawed. oh. if anyone wants the manifests i can post them. and i'm using the maven-bnd-plugin to build and executing on felix. thanks Nico

  Read the article

• PHP: How to implement a __get-like method for local function variables

  - by Tom Frost

  I'm no stranger to __get(), and have used it to make some very convenient libraries in the past. However, I'm faced with a new challenge (PHP 5.3, abbreviated and simplified my code for this question): <?php namespace test; class View { function __construct($filename, $varArray) { $this->filename = $filename; $this->varArray = $varArray; } function display() { include($this->filename); } function __get($varName) { if (isset($this->varArray[$varName])) return $this->varArray[$varName]; return "?? $varname ??"; } } ?> Above is a very, very simplified system for loading a View. This code would call the view and display it: <?php require_once("View.php"); use test\View; $view = new View("views/myview.php", array("user" => "Tom")); $view->display(); ?> My goal for this code is to allow the view "myview.php" to contain code like this: <p> Hello <?php echo $user; ?>! Your E-mail is <?php echo $email; ?> </p> And, used with the above code, this would output "Hello Tom! Your E-mail is ?? email ??" However, this won't work. The view is being included within a class method, so when it refers to $user and $email, it's looking for local function variables -- not variables belonging to the View class. For this reason, __get never gets triggered. I could change all my view's variables to things like $this-user and $this-email, but that would be a messy and unintuitive solution. I'd love to find a way where I can reference variables directly WITHOUT having PHP throw an error when an undefined variable is used. Thoughts? Is there a clean way to do this, or am I forced to resort to hacky solutions?

  Read the article

• Internationalization of static pages with Rails

  - by Gavin

  I feel like I'm missing something really simple and I keep spinning my wheels on this problem. I currently have internationalization working throughout my app. The translations work and the routes work perfectly. At least, most of the site works with the exception of the routes to my two static pages, my "About" and "FAQ" pages. Every other link throughout the app points to the proper localized route. For example if I select "french" as my language, links point to the appropriate "(/:locale)/controller(.:format)." However, despite the changes I make throughout the app my links for the "About" and "FAQ" refuse to point to "../fr/static/about" and always point to "/static/about." To make matters stranger, when I run rake routes I see: "GET (/:locale)/static/:permalink(.:format) pages#show {:locale=/en|fr/}" and when I manually type in "../fr/static/about" the page translates perfectly. My Routes file: devise_for :users scope "(:locale)", :locale => /en|fr/ do get 'static/:permalink', :controller => 'pages', :action => 'show' resources :places, only: [:index, :show, :destroy] resources :homes, only: [:index, :show] match '/:locale' => 'places#index' get '/'=>'places#index',:as=>"root" end My ApplicationController: before_filter :set_locale def set_locale I18n.locale=params[:locale]||I18n.default_locale end def default_url_options(options={}) logger.debug "default_url_options is passed options: #{options.inspect}\n" { :locale => I18n.locale } end and My Pages Controller: class PagesController < ApplicationController before_filter :validate_page PAGES = ['about_us', 'faq'] def show render params[:permalink] end def validate_page redirect_to :status => 404 unless PAGES.include?(params[:permalink]) end end I'd be very grateful for any help ... it's just been one of those days. Edit: Thanks to Terry for jogging me to include views. <div class="container-fluid nav-collapse"> <ul class="nav"> <li class="dropdown"> <a href="#" class="dropdown-toggle" data-toggle="dropdown"><%= t(:'navbar.about') %><b class="caret"></b></a> <ul class="dropdown-menu"> <li><%=link_to t(:'navbar.about_us'), "/static/about_us"%></li> <li><%=link_to t(:'navbar.faq'), "/static/faq"%></li> <li><%=link_to t(:'navbar.blog'), '#' %></li> </ul> </li>

  Read the article

• C# .NET Why does my inherited listview keep drawing in LargeIcon View ?? Because Microsoft is Evil!!

  - by Bugz R us

  I have a inherited Listview which standard has to be in Tile Mode. When using this control, the DrawItem gives e.bounds which are clearly bounds of largeIcon view ?? When debugging to check the view it is actually set to, it says it's in Tile view ?? Yet e.DrawText draws LargeIcon view ?? ......... Edit: ................. This seems only to happen when the control is placed upon another usercontrol? ......... Edit 2: ................. It gets stranger ... When i add buttons next to the list to change the view at runtime, "Tile" is the same as "LargeIcon", and "List" view is the same as "SmallIcons" ??? I've also completely removed the ownerdraw ... .......... Edit 3: ................. MSDN Documentation: Tile view Each item appears as a full-sized icon with the item label and subitem information to the right of it. The subitem information that appears is specified by the application. This view is available only on Windows XP and the Windows Server 2003 family. On earlier operating systems, this value is ignored and the ListView control displays in the LargeIcon view. Well I am on XP ya damn liars ?!? Apparently if the control is within a usercontrol, this value is ignored too ... pff I'm getting enough of this Microsoft crap .... you just keep on hitting bugs ... another day down the drain ... public class InheritedListView : ListView { //Hiding members ... mwuahahahahaha //yeah i was still laughing then [BrowsableAttribute(false)] public new View View { get { return base.View; } } public InheritedListView() { base.View = View.Tile; this.OwnerDraw = true; base.DrawItem += new DrawListViewItemEventHandler(DualLineGrid_DrawItem); } void DualLineGrid_DrawItem(object sender, DrawListViewItemEventArgs e) { View v = this.View; //**when debugging, v is Tile, however e.DrawText() draws in LargeIcon mode, // e.Bounds also reflects LargeIcon mode ???? ** }

  Read the article

• Intermittent 404 on select assets, LAMP stack

  - by Tom Lagier

  We have a LAMP stack WordPress server that is serving most assets correctly. However, one plugin's CSS file and several images are returning soft 404s roughly 20% of the time. I can't find any reference to the 404 in the access logs, but the browser is definitely receiving a 404 response from somewhere (WordPress, I would assume). When I use an alias URL that does not match the site URL but does resolve to the asset path, the resource loads correctly 100% of the time. However, using the site url only resolves for the select, problematic assets 20% of the time. You can test one of the problematic assets here: http://www.mreco.org/wp-content/uploads/2014/05/zero-cost.jpg However the alias link always resolves correctly: http://mr-eco.wordpress.promocampaigns.com/wp-content/uploads/2014/05/zero-cost.jpg Stranger, if I attempt to access outdated content that definitely does not exist on the server, at the live URL it returns the content roughly 50% of the time. Using the alias link, it 404s 100% of the time - the correct behavior. Error log and PHP error log are clean. A sample access log (pulled from grep 'zero-cost.jpg' /var/log/httpd/mr-eco-access_log) from several refreshes of the live direct link (where I am not seeing any 404's): 10.166.202.202 - - [28/May/2014:20:27:41 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:42 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.176.201.37 - - [28/May/2014:20:27:56 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 200 57027 Chrome's dev tools list the following network activity before displaying 404 page content: zero-cost.jpg /wp-content/uploads/2014/05 GET 404 Not Found text/html Other 15.9?KB 73.2?KB 953?ms 947?ms My Apache configuration is standard, I've listed the virtual host entry and .htaccess file below. I can provide other parts of Apache config if necessary. Virtual host: <VirtualHost *:80> DocumentRoot /var/www/public_html/mr-eco.wordpress.promocampaigns.com ServerName www.mreco.org ServerAlias mreco.org mr-eco.wordpress.promocampaigns.com ErrorLog logs/mr-eco-error_log CustomLog logs/mr-eco-access_log common <Directory /var/www/public_html/mr-eco.wordpress.promocampaigns.com> AllowOverride All SetOutputFilter DEFLATE </Directory> </VirtualHost> .htaccess: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress I have checked for multiple A records and can confirm that there is a single A record pointing at the domain: ;; ANSWER SECTION: mreco.org. 60 IN A 50.18.58.174 I'm fairly new to systems administration, and at a complete loss as to what could cause this. In the past, inconsistently 404ing assets have been because of out-of-sync instances behind a load balancer. In this case, it is a single instance behind the load balancer. Because of the inconsistency, it feels like a caching issue. We don't make use of Apache caching, and as far as I know WordPress should not be caching either. What I've done so far: Reset WordPress permalinks Disabled WordPress plugins Re-generated WordPress .htaccess file Swapped ServerName and ServerAlias directives Cleared browser cache Confirmed disk location of resources Checked PHP, access, and error logs Confirmed correct DNS setup (can post if necessary) I'm at a total loss. Thanks for helping me out!

  Read the article

• Summit Time!

  - by Ajarn Mark Caldwell

  Boy, how time flies!  I can hardly believe that the 2011 PASS Summit is just one week away.  Maybe it snuck up on me because it’s a few weeks earlier than last year.  Whatever the cause, I am really looking forward to next week.  The PASS Summit is the largest SQL Server conference in the world and a fantastic networking opportunity thrown in for no additional charge.  Here are a few thoughts to help you maximize the week. Networking As Karen Lopez (blog | @DataChick) mentioned in her presentation for the Professional Development Virtual Chapter just a couple of weeks ago, “Don’t wait until you need a new job to start networking.”  You should always be working on your professional network.  Some people, especially technical-minded people, get confused by the term networking.  The first image that used to pop into my head was the image of some guy standing, awkwardly, off to the side of a cocktail party, trying to shmooze those around him.  That’s not what I’m talking about.  If you’re good at that sort of thing, and you can strike up a conversation with some stranger and learn all about them in 5 minutes, and walk away with your next business deal all but approved by the lawyers, then congratulations.  But if you’re not, and most of us are not, I have two suggestions for you.  First, register for Don Gabor’s 2-hour session on Tuesday at the Summit called Networking to Build Business Contacts.  Don is a master at small talk, and at teaching others, and in just those two short hours will help you with important tips about breaking the ice, remembering names, and smooth transitions into and out of conversations.  Then go put that great training to work right away at the Tuesday night Welcome Reception and meet some new people; which is really my second suggestion…just meet a few new people.  You see, “networking” is about meeting new people and being friendly without trying to “work it” to get something out of the relationship at this point.  In fact, Don will tell you that a better way to build the connection with someone is to look for some way that you can help them, not how they can help you. There are a ton of opportunities as long as you follow this one key point: Don’t stay in your hotel!  At the least, get out and go to the free events such as the Tuesday night Welcome Reception, the Wednesday night Exhibitor Reception, and the Thursday night Community Appreciation Party.  All three of these are perfect opportunities to meet other professionals with a similar job or interest as you, and you never know how that may help you out in the future.  Maybe you just meet someone to say HI to at breakfast the next day instead of eating alone.  Or maybe you cross paths several times throughout the Summit and compare notes on different sessions you attended.  And you just might make new friends that you look forward to seeing year after year at the Summit.  Who knows, it might even turn out that you have some specific experience that will help out that other person a few months’ from now when they run into the same challenge that you just overcame, or vice-versa.  But the point is, if you don’t get out and meet people, you’ll never have the chance for anything else to happen in the future. One more tip for shy attendees of the Summit…if you can’t bring yourself to strike up conversation with strangers at these events, then at the least, after you sit through a good session that helps you out, go up to the speaker and introduce yourself and thank them for taking the time and effort to put together their presentation.  Ideally, when you do this, tell them WHY it was beneficial to you (e.g. “Now I have a new idea of how to tackle a problem back at the office.”)  I know you think the speakers are all full of confidence and are always receiving a ton of accolades and applause, but you’re wrong.  Most of them will be very happy to hear first-hand that all the work they put into getting ready for their presentation is paying off for somebody. Training With over 170 technical sessions at the Summit, training is what it’s all about, and the training is fantastic!  Of course there are the big-name trainers like Paul Randall, Kimberly Tripp, Kalen Delaney, Itzik Ben-Gan and several others, but I am always impressed by the quality of the training put on by so many other “regular” members of the SQL Server community.  It is amazing how you don’t have to be a published author or otherwise recognized as an “expert” in an area in order to make a big impact on others just by sharing your personal experience and lessons learned.  I would rather hear the story of, and lessons learned from, “some guy or gal” who has actually been through an issue and came out the other side, than I would a trained professor who is speaking just from theory or an intellectual understanding of a topic. In addition to the three full days of regular sessions, there are also two days of pre-conference intensive training available.  There is an extra cost to this, but it is a fantastic opportunity.  Think about it…you’re already coming to this area for training, so why not extend your stay a little bit and get some in-depth training on a particular topic or two?  I did this for the first time last year.  I attended one day of extra training and it was well worth the time and money.  One of the best reasons for it is that I am extremely busy at home with my regular job and family, that it was hard to carve out the time to learn about the topic on my own.  It worked out so well last year that I am doubling up and doing two days or “pre-cons” this year. And then there are the DVDs.  I think these are another great option.  I used the online schedule builder to get ready and have an idea of which sessions I want to attend and when they are (much better than trying to figure this out at the last minute every day).  But the problem that I have run into (seems this happens every year) is that nearly every session block has two different sessions that I would like to attend.  And some of them have three!  ACK!  That won’t work!  What is a guy supposed to do?  Well, one option is to purchase the DVDs which are recordings of the audio and projected images from each session so you can continue to attend sessions long after the Summit is officially over.  Yes, many (possibly all) of these also get posted online and attendees can access those for no extra charge, but those are not necessarily all available as quickly as the DVD recording are, and the DVDs are often more convenient than downloading, especially if you want to share the training with someone who was not able to attend in person. Remember, I don’t make any money or get any other benefit if you buy the DVDs or from anything else that I have recommended here.  These are just my own thoughts, trying to help out based on my experiences from the 8 or so Summits I have attended.  There is nothing like the Summit.  It is an awesome experience, fantastic training, and a whole lot of fun which is just compounded if you’ll take advantage of the first part of this article and make some new friends along the way.

  Read the article

• Introducing… SharePress!

  - by Bil Simser

  For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

  Read the article

• "Content is not allowed in prolog" when parsing perfectly valid XML on GAE

  - by Adrian Petrescu

  Hey guys, I've been beating my head against this absolutely infuriating bug for the last 48 hours, so I thought I'd finally throw in the towel and try asking here before I throw my laptop out the window. I'm trying to parse the response XML from a call I made to AWS SimpleDB. The response is coming back on the wire just fine; for example, it may look like: <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"> <ListDomainsResult> <DomainName>Audio</DomainName> <DomainName>Course</DomainName> <DomainName>DocumentContents</DomainName> <DomainName>LectureSet</DomainName> <DomainName>MetaData</DomainName> <DomainName>Professors</DomainName> <DomainName>Tag</DomainName> </ListDomainsResult> <ResponseMetadata> <RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId> <BoxUsage>0.0000071759</BoxUsage> </ResponseMetadata> </ListDomainsResponse> I pass in this XML to a parser with XMLEventReader eventReader = xmlInputFactory.createXMLEventReader(response.getContent()); and call eventReader.nextEvent(); a bunch of times to get the data I want. Here's the bizarre part -- it works great inside the local server. The response comes in, I parse it, everyone's happy. The problem is that when I deploy the code to Google App Engine, the outgoing request still works, and the response XML seems 100% identical and correct to me, but the response fails to parse with the following exception: com.amazonaws.http.HttpClient handleResponse: Unable to unmarshall response (ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog.): <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"><ListDomainsResult><DomainName>Audio</DomainName><DomainName>Course</DomainName><DomainName>DocumentContents</DomainName><DomainName>LectureSet</DomainName><DomainName>MetaData</DomainName><DomainName>Professors</DomainName><DomainName>Tag</DomainName></ListDomainsResult><ResponseMetadata><RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId><BoxUsage>0.0000071759</BoxUsage></ResponseMetadata></ListDomainsResponse> javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(Unknown Source) at com.sun.xml.internal.stream.XMLEventReaderImpl.nextEvent(Unknown Source) at com.amazonaws.transform.StaxUnmarshallerContext.nextEvent(StaxUnmarshallerContext.java:153) ... (rest of lines omitted) I have double, triple, quadruple checked this XML for 'invisible characters' or non-UTF8 encoded characters, etc. I looked at it byte-by-byte in an array for byte-order-marks or something of that nature. Nothing; it passes every validation test I could throw at it. Even stranger, it happens if I use a Saxon-based parser as well -- but ONLY on GAE, it always works fine in my local environment. It makes it very hard to trace the code for problems when I can only run the debugger on an environment that works perfectly (I haven't found any good way to remotely debug on GAE). Nevertheless, using the primitive means I have, I've tried a million approaches including: XML with and without the prolog With and without newlines With and without the "encoding=" attribute in the prolog Both newline styles With and without the chunking information present in the HTTP stream And I've tried most of these in multiple combinations where it made sense they would interact -- nothing! I'm at my wit's end. Has anyone seen an issue like this before that can hopefully shed some light on it? Thanks!

  Read the article

• My PNG has transparency, but after saving with PHP GD, transparency is lost [closed]

  - by Harry Stroker

  I found the solution to my problem. See below the original post and completely at the bottom my solution. I made a stupid mistake :) First I crop an image and then save it to a png file. Right after this, I also show the image. However, the saved png does not have transparency and the shown one has. What is going on? $this->resource = imagecreatefrompng($this->url); imagealphablending($this->resource, false); imagesavealpha($this->resource, true); $newResource = imagecreatetruecolor($destWidth, $destHeight); imagealphablending($newResource, false); imagesavealpha($newResource, true); $resample = imagecopyresampled($newResource,$this->resource,0,0,$srcX1,$srcY1,$destWidth,$destHeight,$srcX2-$srcX1, $srcY2-$srcY1); imagedestroy($this->resource); $this->resource = $newResource; // SAVING imagepng($this->resource, $destination, 100); // SHOWING header('Content-type: image/png'); imagepng($this->resource); The reason I also save the image is for caching. If the script is executed on a png, it saves a cached png. Next time the image is requested, the png file will be shown, but it has lost its transparency. Even stranger: When I save that cached png image as (within Firefox), it saves it suddenly as a jpg, even though the extension was png. Downloading the cached png using chrome and opening it in Photoshop gives the error: "file-format module cannot parse the file". I will show you the shown PNG and the generated PNG: http://www.foodmuseum.nl/SaveProblemTransparency.png Once I try to show that saved PNG with the GD library, it gives me an error. EDIT NO NO NO NO THIS IS NOT A DUPLICATE!!!... I ALREADY USED THEIR SOLUTION. The solution in the supposedly duplicate works for showing my image. But I also try to save it with the exact same resource, but then it has no transparency. EDIT 2 - SOLUTION I found out what the problem was. It was a stupid mistake. The script I provided above were cut out of a class and placed as sequential code, while in real this is not what exactly happened. The save image function: function saveImage($destination,$quality = 90) { $this->loadResource(); switch($extension){ default: case 'JPG': case 'jpg': imagejpeg($this->resource, $destination, $quality); break; case 'gif': imagegif($this->resource, $destination); break; case 'png': imagepng($this->resource, $destination); break; case 'gd2': imagegd2($this->resource, $destination); break; } } However... $extension does not exist. I fixed it by adding: $extension = $this->getExtension($destination);

  Read the article

• Rails routing to XML/JSON without views gone mad

  - by John Schulze

  I have a mystifying problem. In a very simple Ruby app i have three classes: Drivers, Jobs and Vehicles. All three classes only consist of Id and Name. All three classes have the same #index and #show methods and only render in JSON or XML (this is in fact true for all their CRUD methods, they are identical in everything but name). There are no views. For example: def index @drivers= Driver.all respond_to do |format| format.js { render :json => @drivers} format.xml { render :xml => @drivers} end end def show @driver = Driver.find(params[:id]) respond_to do |format| format.js { render :json => @driver} format.xml { render :xml => @driver} end end The models are similarly minimalistic and only contain: class Driver< ActiveRecord::Base validates_presence_of :name end In routes.rb I have: map.resources :drivers map.resources :jobs map.resources :vehicles map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' I can perform POST/create, GET/index and PUT/update on all three classes and GET/read used to work as well until I installed the "has many polymorphs" ActiveRecord plugin and added to environment.rb: require File.join(File.dirname(__FILE__), 'boot') require 'has_many_polymorphs' require 'active_support' Now for two of the three classes I cannot do a read any more. If i go to localhost:3000/drivers they all list nicely in XML but if i go to localhost:3000/drivers/3 I get an error: Processing DriversController#show (for 127.0.0.1 at 2009-06-11 20:34:03) [GET] Parameters: {"id"=>"3"} [4;36;1mDriver Load (0.0ms)[0m [0;1mSELECT * FROM "drivers" WHERE ("drivers"."id" = 3) [0m ActionView::MissingTemplate (Missing template drivers/show.erb in view path app/views): app/controllers/drivers_controller.rb:14:in `show' ...etc This is followed a by another unexpected error: Processing ApplicationController#show (for 127.0.0.1 at 2009-06-11 21:35:52)[GET] Parameters: {"id"=>"3"} NameError (uninitialized constant ApplicationController::AreaAccessDenied): ...etc What is going on here? Why does the same code work for one class but not the other two? Why is it trying to do a #view on the ApplicationController? I found that if I create a simple HTML view for each of the three classes these work fine. To each class I add: format.html # show.html.erb With this in place, going to localhost:3000/drivers/3 renders out the item in HTML and I get no errors in the log. But if attach .xml to the URL it again fails for two of the classes (with the same error message as before) while one will output XML as expected. Even stranger, on the two failing classes, when adding .js to the URL (to trigger JSON rendering) I get the HTML output instead! Is it possible this has something to do with the "has many polymorphs" plugin? I have heard of people having routing issues after installing it. Removing "has many polymorphs" and "active support" from environment.rb (and rebooting the sever) seems to make no difference whatsoever. Yet my problems started after it was installed. I've spent a number of hours on this problem now and am starting to get a little desperate, Google turns up virtually no information which makes me suspect I must have missed something elementary. Any enlightenment or hint gratefully received! JS

  Read the article

• How to debug SITE.MASTER ASPX file?

  - by salvationishere

  I am developing a C#/SQL VS 2008 website application and I'm trying to set breakpoints in my site.master file--is there a way to do this? The contents of this file are: <%@ Master Language="C#" AutoEventWireup="true" CodeFile="Site.master.cs" Inherits="Site" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title>Forms Authentication, Authorization, and User Accounts</title> <link href="Styles.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="wrapper"> <form id="form1" runat="server"> <div id="header"> <span class="title">User Account Tutorials</span><br /> <span class="breadcrumb"> <asp:SiteMapPath ID="SiteMapPath1" runat="server"> </asp:SiteMapPath> </span> </div> <div id="content"> <asp:ContentPlaceHolder ID="MainContent" runat="server"> <!-- Page-specific content will go here... --> </asp:ContentPlaceHolder> </div> <div id="navigation"> <asp:ContentPlaceHolder ID="LoginContent" runat="server"> <asp:LoginView ID="LoginView1" runat="server"> <LoggedInTemplate> Welcome back,<asp:LoginName ID="LoginName1" runat="server" /> </LoggedInTemplate> <AnonymousTemplate> Hello, stranger! </AnonymousTemplate> </asp:LoginView> <br /> <br /> </asp:ContentPlaceHolder> <asp:LoginStatus ID="LoginStatus1" runat="server" LogoutAction="Redirect" LogoutPageUrl="~/Logout.aspx" /> <ul> <li> <asp:HyperLink runat="server" ID="lnkHome" NavigateUrl="~/Default.aspx">Home</asp:HyperLink> </li> <asp:Repeater runat="server" ID="menu" DataSourceID="SiteMapDataSource1"> <ItemTemplate> <li> <asp:HyperLink ID="lnkMenuItem" runat="server" NavigateUrl='<%# Eval("Url") %>'><%# Eval("Title") %></asp:HyperLink> <asp:Repeater ID="submenu" runat="server" DataSource="<%# ((SiteMapNode) Container.DataItem).ChildNodes %>"> <HeaderTemplate> <ul> </HeaderTemplate> <ItemTemplate> <li> <asp:HyperLink ID="lnkMenuItem" runat="server" NavigateUrl='<%# Eval("Url") %>'><%# Eval("Title") %></asp:HyperLink> </li> </ItemTemplate> <FooterTemplate> </ul> </FooterTemplate> </asp:Repeater> </li> </ItemTemplate> </asp:Repeater> </ul> <asp:SiteMapDataSource ID="SiteMapDataSource1" runat="server" ShowStartingNode="false" /> </div> </form> </div> </body> </html>

  Read the article

• How do I prevent TCP connection freezes over an OpenVPN network?

  - by Jason R

  New details added at the end of this question; it's possible that I'm zeroing in on the cause. I have a UDP OpenVPN-based VPN set up in tap mode (I need tap because I need the VPN to pass multicast packets, which doesn't seem to be possible with tun networks) with a handful of clients across the Internet. I've been experiencing frequent TCP connection freezes over the VPN. That is, I will establish a TCP connection (e.g. an SSH connection, but other protocols have similar issues), and at some point during the session, it seems that traffic will cease being transmitted over that TCP session. This seems to be related to points at which large data transfers occur, such as if I execute an ls command in an SSH session, or if I cat a long log file. Some Google searches turn up a number of answers like this previous one on Server Fault, indicating that the likely culprit is an MTU issue: that during periods of high traffic, the VPN is trying to send packets that get dropped somewhere in the pipes between the VPN endpoints. The above-linked answer suggests using the following OpenVPN configuration settings to mitigate the problem: fragment 1400 mssfix This should limit the MTU used on the VPN to 1400 bytes and fix the TCP maximum segment size to prevent the generation of any packets larger than that. This seems to mitigate the problem a bit, but I still frequently see the freezes. I've tried a number of sizes as arguments to the fragment directive: 1200, 1000, 576, all with similar results. I can't think of any strange network topology between the two ends that could trigger such a problem: the VPN server is running on a pfSense machine connected directly to the Internet, and my client is also connected directly to the Internet at another location. One other strange piece of the puzzle: if I run the tracepath utility, then that seems to band-aid the problem. A sample run looks like: [~]$ tracepath -n 192.168.100.91 1: 192.168.100.90 0.039ms pmtu 1500 1: 192.168.100.91 40.823ms reached 1: 192.168.100.91 19.846ms reached Resume: pmtu 1500 hops 1 back 64 The above run is between two clients on the VPN: I initiated the trace from 192.168.100.90 to the destination of 192.168.100.91. Both clients were configured with fragment 1200; mssfix; in an attempt to limit the MTU used on the link. The above results would seem to suggest that tracepath was able to detect a path MTU of 1500 bytes between the two clients. I would assume that it would be somewhat smaller due to the fragmentation settings specified in the OpenVPN configuration. I found that result somewhat strange. Even stranger, however: if I have a TCP connection in the stalled state (e.g. an SSH session with a directory listing that froze in the middle), then executing the tracepath command shown above causes the connection to start up again! I can't figure out any reasonable explanation for why this would be the case, but I feel like this might be pointing toward a solution to ultimately eradicate the problem. Does anyone have any recommendations for other things to try? Edit: I've come back and looked at this a bit further, and have found only more confounding information: I set the OpenVPN connection to fragment at 1400 bytes, as shown above. Then, I connected to the VPN from across the Internet and used Wireshark to look at the UDP packets that were sent to the VPN server while the stall occurred. None were greater than the specified 1400 byte count, so the fragmentation seems to be functioning properly. To verify that even a 1400-byte MTU would be sufficient, I pinged the VPN server using the following (Linux) command: ping <host> -s 1450 -M do This (I believe) sends a 1450-byte packet with fragmentation disabled (I at least verified that it didn't work if I set it to an obviously-too-large value like 1600 bytes). These seem to work just fine; I get replies back from the host with no issue. So, maybe this isn't an MTU issue at all. I'm just confused as to what else it might be! Edit 2: The rabbit hole just keeps getting deeper: I've now isolated the problem a bit more. It seems to be related to the exact OS that the VPN client uses. I have successfully duplicated the problem on at least three Ubuntu machines (versions 12.04 through 13.04). I can reliably duplicate an SSH connection freeze within a minute or so by just cat-ing a large log file. However, if I do the same test using a CentOS 6 machine as a client, then I don't see the problem! I've tested using the exact same OpenVPN client version as I was using on the Ubuntu machines. I can cat log files for hours without seeing the connection freeze. This seems to provide some insight as to the ultimate cause, but I'm just not sure what that insight is. I have examined the traffic over the VPN using Wireshark. I'm not a TCP expert, so I'm not sure what to make of the gory details, but the gist is that at some point, a UDP packet gets dropped due to the limited bandwidth of the Internet link, causing TCP retransmissions inside the VPN tunnel. On the CentOS client, these retransmissions occur properly and things move on happily. At some point with the Ubuntu clients, though, the remote end starts retransmitting the same TCP segment over and over (with the transmit delay increasing between each retransmission). The client sends what looks like a valid TCP ACK to each retransmission, but the remote end still continues to transmit the same TCP segment periodically. This extends ad infinitum and the connection stalls. My question here would be: Does anyone have any recommendations for how to troubleshoot and/or determine the root cause of the TCP issue? It's as if the remote end isn't accepting the ACK messages sent by the VPN client. One common difference between the CentOS node and the various Ubuntu releases is that Ubuntu has a much more recent Linux kernel version (from 3.2 in Ubuntu 12.04 to 3.8 in 13.04). A pointer to some new kernel bug maybe? I'm assuming that if that were so, then I wouldn't be the only one experiencing the problem; I don't think this seems like a particularly exotic setup.

  Read the article

• Unexpected ArrayIndexOutOfBoundsException in JavaFX application, refering to no array

  - by Eugene

  I have the following code: public void setContent(Importer3D importer) { if (DEBUG) { System.out.println("Initialization of Mesh's arrays"); } coords = importer.getCoords(); texCoords = importer.getTexCoords(); faces = importer.getFaces(); if (DEBUG) { System.out.println("Applying Mesh's arrays"); } mesh = new TriangleMesh(); mesh.getPoints().setAll(coords); mesh.getTexCoords().setAll(texCoords); mesh.getFaces().setAll(faces); if (DEBUG) { System.out.println("Initialization of the material"); } initMaterial(); if (DEBUG) { System.out.println("Setting the MeshView"); } meshView.setMesh(mesh); meshView.setMaterial(material); meshView.setDrawMode(DrawMode.FILL); if (DEBUG) { System.out.println("Adding to 3D scene"); } root3d.getChildren().clear(); root3d.getChildren().add(meshView); if (DEBUG) { System.out.println("3D model is ready!"); } } The Imporeter3D class part: private void load(File file) { stlLoader = new STLLoader(file); } public float[] getCoords() { return stlLoader.getCoords(); } public float[] getTexCoords() { return stlLoader.getTexCoords(); } public int[] getFaces() { return stlLoader.getFaces(); } The STLLoader: public class STLLoader{ public STLLoader(File file) { stlFile = new STLFile(file); loadManager = stlFile.loadManager; pointsArray = new PointsArray(stlFile); texCoordsArray = new TexCoordsArray(); } public float[] getCoords() { return pointsArray.getPoints(); } public float[] getTexCoords() { return texCoordsArray.getTexCoords(); } public int[] getFaces() { return pointsArray.getFaces(); } private STLFile stlFile; private PointsArray pointsArray; private TexCoordsArray texCoordsArray; private FacesArray facesArray; public SimpleBooleanProperty finished = new SimpleBooleanProperty(false); public LoadManager loadManager;} PointsArray file: public class PointsArray { public PointsArray(STLFile stlFile) { this.stlFile = stlFile; initPoints(); } private void initPoints() { ArrayList<Double> pointsList = stlFile.getPoints(); ArrayList<Double> uPointsList = new ArrayList<>(); faces = new int[pointsList.size()*2]; int n = 0; for (Double d : pointsList) { if (uPointsList.indexOf(d) == -1) { uPointsList.add(d); } faces[n] = uPointsList.indexOf(d); faces[++n] = 0; n++; } int i = 0; points = new float[uPointsList.size()]; for (Double d : uPointsList) { points[i] = d.floatValue(); i++; } } public float[] getPoints() { return points; } public int[] getFaces() { return faces; } private float[] points; private int[] faces; private STLFile stlFile; public static boolean DEBUG = true; } And STLFile: ArrayList<Double> coords = new ArrayList<>(); double temp; private void readV(STLParser parser) { for (int n = 0; n < 3; n++) { if(!(parser.ttype==STLParser.TT_WORD && parser.sval.equals("vertex"))) { System.err.println("Format Error:expecting 'vertex' on line " + parser.lineno()); } else { if (parser.getNumber()) { temp = parser.nval; coords.add(temp); if(DEBUG) { System.out.println("Vertex:"); System.out.print("X=" + temp + " "); } if (parser.getNumber()) { temp = parser.nval; coords.add(temp); if(DEBUG) { System.out.print("Y=" + temp + " "); } if (parser.getNumber()) { temp = parser.nval; coords.add(temp); if(DEBUG) { System.out.println("Z=" + temp + " "); } readEOL(parser); } else System.err.println("Format Error: expecting coordinate on line " + parser.lineno()); } else System.err.println("Format Error: expecting coordinate on line " + parser.lineno()); } else System.err.println("Format Error: expecting coordinate on line " + parser.lineno()); } if (n < 2) { try { parser.nextToken(); } catch (IOException e) { System.err.println("IO Error on line " + parser.lineno() + ": " + e.getMessage()); } } } } public ArrayList<Double> getPoints() { return coords; } As a result of all of this code, I expected to get 3d model in MeshView. But the present result is very strange: everything works and in DEBUG mode I get 3d model is ready! from setContent(), and then unexpected ArrayIndexOutOfBoundsException: File readed Initialization of Mesh's arrays Applying Mesh's arrays Initialization of the material Setting the MeshView Adding to 3D scene 3D model is ready! java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 32252 at com.sun.javafx.collections.ObservableFloatArrayImpl.rangeCheck(ObservableFloatArrayImpl.java:276) at com.sun.javafx.collections.ObservableFloatArrayImpl.get(ObservableFloatArrayImpl.java:184) at javafx.scene.shape.TriangleMesh.computeBounds(TriangleMesh.java:262) at javafx.scene.shape.MeshView.impl_computeGeomBounds(MeshView.java:151) at javafx.scene.Node.updateGeomBounds(Node.java:3497) at javafx.scene.Node.getGeomBounds(Node.java:3450) at javafx.scene.Node.getLocalBounds(Node.java:3432) at javafx.scene.Node.updateTxBounds(Node.java:3510) at javafx.scene.Node.getTransformedBounds(Node.java:3350) at javafx.scene.Node.updateBounds(Node.java:516) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.SubScene.updateBounds(SubScene.java:556) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Parent.updateBounds(Parent.java:1668) at javafx.scene.Scene$ScenePulseListener.pulse(Scene.java:2309) at com.sun.javafx.tk.Toolkit.firePulse(Toolkit.java:329) at com.sun.javafx.tk.quantum.QuantumToolkit.pulse(QuantumToolkit.java:479) at com.sun.javafx.tk.quantum.QuantumToolkit.pulse(QuantumToolkit.java:459) at com.sun.javafx.tk.quantum.QuantumToolkit$13.run(QuantumToolkit.java:326) at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:95) at com.sun.glass.ui.win.WinApplication._runLoop(Native Method) at com.sun.glass.ui.win.WinApplication.access$300(WinApplication.java:39) at com.sun.glass.ui.win.WinApplication$3$1.run(WinApplication.java:101) at java.lang.Thread.run(Thread.java:724) Exception in thread "JavaFX Application Thread" java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 32252 at com.sun.javafx.collections.ObservableFloatArrayImpl.rangeCheck(ObservableFloatArrayImpl.java:276) at com.sun.javafx.collections.ObservableFloatArrayImpl.get(ObservableFloatArrayImpl.java:184) The stranger thing is that this stack doesn't stop until I close the program. And moreover it doesn't point to any my array. What is this? And why does it happen?

  Read the article

< Previous Page | 1 2 3 4 5