Search Results

Search found 150 results on 6 pages for 'dude'.

Page 5/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

  • Why does the screen resolution of 1440x900 suddenly disappear from Intel GMA Control Panel?

    - by GeneQ
    I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2. I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've goggled this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

    Read the article

  • How does one make sure or even guarantee server time are sync correctly between dozens of servers across multiple datacenter on different location?

    - by forestclown
    Currently our web applications contain a logic to check if the data sent to the web server is expired or not by comparing the timestamp of the data with the date/time of the server. Everything goes will, until some dude from data center accidentally modify one of the web server date/time and causes some disruptions in our web services. My managers are of course not happy with this, and said we shouldn't use timestamp to check expiry in the first place...anyway.... Network Time Protocol is implemented, because of data centers are spread across different continents so we have one NTP server in each data center. The servers within the data center will have cron jobs to check against the time with their NTP server from the same data center. If time is out of sync it will auto update the server date/time. But then with our managers not happy with it, and think it could still easily causes the same problem. e.g. what if someone accidentally modify the NTP date/time? what if all the NTP servers are out of sync with each other? which NTP servers we can really trust? and blah blah.. So my questions are: What are the current practice to sync date/time between servers across multiple data centers or locations? How does one manages time stamp between web apps? e.g. Server A send data (contain timestamp of Server A) to Server B (compare timestamp between Server B and the timestamp from the data to see if it has expired or not. This is to avoid HTTP replay) Should we really not use timestamp check? Thanks & Best Regards

    Read the article

  • Why does the screen resolution of 1440x900 suddenly disappears from Intel GMA Control Panel?

    - by GeneQ
    I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2 . I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've Goggled that this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? Thanks. UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

    Read the article

  • Multi-partition USB stick

    - by nightcracker
    In my freelance job as "the dude that fixes your computer" I have an extremely handy tool, a bootable USB stick with Ubuntu LiveCD that allows me to recover and investigate in a known, working environment. Now, I want to reformat this USB stick and reinstall with Casper-RW persistance. I did this a few times before with a FAT-formatted USB stick. It was a horror. The USB drive corrupted constantly, by people accidently removing the USB stick, the computer not properly shutting down, ETC. Now what I want to create a multi-partition USB stick so I can put Ubuntu on a ext partition, but still be able to store some Windows stuff in it, by having a secondary FAT partition. However I read somewhere that Windows will only check the first partition on USB sticks, giving a problem with the first bootable linux partition. Is this possible on some way? EDIT Perhaps it wasn't clear what the problem is. The problem is that I read somewhere that Windows will only recognize the first partition on a USB stick. But I want two partitions, a ext partition and a FAT partition. No issues so far, but in order to be bootable the ext partition must be the first one!

    Read the article

  • Windows xp blinking under score after bios

    - by heyjoe
    so this is for an older pc I have to repair for a friend. The pc has an hdd of about 60 something gb, It uses win xp and let's say 60-70% of the boots it hangs on showing only an underscore bilking line after bios screen, rest of the times it boots fine or the computer shuts down on xp loading screen. Sometimes if you let it alone while the underscore is blinking, it will boot after a while, like a few minutes, some times it won't boot at all even if you give him more time, like one hour. When it boots successfully the pc seems to work fine. I think it's a bad hard disk and i'm about to suggest buying a new one and switching it but I don't have enough experience and i would hate making him buy a new hdd and not solving the problem. anyone has any tips? I know there are other topics about blinking underscores or cursors while xp is booting but the issues about the pc shutting itself down or sometimes booting really freaks me out. Can't format everything and re install until about 10 days from now, cause the dude has some program for his business on this pc and I have to migrate it when the next computer arrives, however he needs to use it until then. so please advise, thx.

    Read the article

  • Drupal Ctools Form Wizard in a Block

    - by Iamjon
    Hi everyone I created a custom module that has a Ctools multi step form. It's basically a copy of http://www.nicklewis.org/using-chaos-tools-form-wizard-build-multistep-forms-drupal-6. The form works. I can see it if I got to the url i made for it. For the life of me I can't get the multistep form to show up in a block. Any clues? /** * Implementation of hook_block() * */ function mycrazymodule_block($op='list', $delta=0, $edit=array()) { switch ($op) { case 'list': $blocks[0]['info'] = t('SFT Getting Started'); $blocks[1]['info'] = t('SFT Contact US'); $blocks[2]['info'] = t('SFT News Letter'); return $blocks; case 'view': switch ($delta){ case '0': $block['subject'] = t('SFT Getting Started Subject'); $block['content'] = mycrazymodule_wizard(); break; case '1': $block['subject'] = t('SFT Contact US Subject'); $block['content'] = t('SFT Contact US content'); break; case '2': $block['subject'] = t('SFT News Letter Subject'); $block['content'] = t('SFT News Letter cONTENT'); break; } return $block; } } /** * Implementation of hook_menu(). */ function mycrazymodule_menu() { $items['hellocowboy'] = array( 'title' = 'Two Step Form', 'page callback' = 'mycrazymodule_wizard', 'access arguments' = array('access content') ); return $items; } /** * menu callback for the multistep form * step is whatever arg one is -- and will refer to the keys listed in * $form_info['order'], and $form_info['forms'] arrays */ function mycrazymodule_wizard() { $step = arg(1); // required includes for wizard $form_state = array(); ctools_include('wizard'); ctools_include('object-cache'); // The array that will hold the two forms and their options $form_info = array( 'id' = 'getting_started', 'path' = "hellocowboy/%step", 'show trail' = FALSE, 'show back' = FALSE, 'show cancel' = false, 'show return' =false, 'next text' = 'Submit', 'next callback' = 'getting_started_add_subtask_next', 'finish callback' = 'getting_started_add_subtask_finish', 'return callback' = 'getting_started_add_subtask_finish', 'order' = array( 'basic' = t('Step 1: Basic Info'), 'lecture' = t('Step 2: Choose Lecture'), ), 'forms' = array( 'basic' = array( 'form id' = 'basic_info_form' ), 'lecture' = array( 'form id' = 'choose_lecture_form' ), ), ); $form_state = array( 'cache name' = NULL, ); // no matter the step, you will load your values from the callback page $getstart = getting_started_get_page_cache(NULL); if (!$getstart) { // set form to first step -- we have no data $step = current(array_keys($form_info['order'])); $getstart = new stdClass(); //create cache ctools_object_cache_set('getting_started', $form_state['cache name'], $getstart); //print_r($getstart); } //THIS IS WHERE WILL STORE ALL FORM DATA $form_state['getting_started_obj'] = $getstart; // and this is the witchcraft that makes it work $output = ctools_wizard_multistep_form($form_info, $step, $form_state); return $output; } function basic_info_form(&$form, &$form_state){ $getstart = &$form_state['getting_started_obj']; $form['firstname'] = array( '#weight' = '0', '#type' = 'textfield', '#title' = t('firstname'), '#size' = 60, '#maxlength' = 255, '#required' = TRUE, ); $form['lastname'] = array( '#weight' = '1', '#type' = 'textfield', '#title' = t('lastname'), '#required' = TRUE, '#size' = 60, '#maxlength' = 255, ); $form['phone'] = array( '#weight' = '2', '#type' = 'textfield', '#title' = t('phone'), '#required' = TRUE, '#size' = 60, '#maxlength' = 255, ); $form['email'] = array( '#weight' = '3', '#type' = 'textfield', '#title' = t('email'), '#required' = TRUE, '#size' = 60, '#maxlength' = 255, ); $form['newsletter'] = array( '#weight' = '4', '#type' = 'checkbox', '#title' = t('I would like to receive the newsletter'), '#required' = TRUE, '#return_value' = 1, '#default_value' = 1, ); $form_state['no buttons'] = TRUE; } function basic_info_form_validate(&$form, &$form_state){ $email = $form_state['values']['email']; $phone = $form_state['values']['phone']; if(valid_email_address($email) != TRUE){ form_set_error('Dude you have an error', t('Where is your email?')); } //if (strlen($phone) 0 && !ereg('^[0-9]{1,3}-[0-9]{3}-[0-9]{3,4}-[0-9]{3,4}$', $phone)) { //form_set_error('Dude the phone', t('Phone number must be in format xxx-xxx-nnnn-nnnn.')); //} } function basic_info_form_submit(&$form, &$form_state){ //Grab the variables $firstname =check_plain ($form_state['values']['firstname']); $lastname = check_plain ($form_state['values']['lastname']); $email = check_plain ($form_state['values']['email']); $phone = check_plain ($form_state['values']['phone']); $newsletter = $form_state['values']['newsletter']; //Send the form and Grab the lead id $leadid = send_first_form($lastname, $firstname, $email,$phone, $newsletter); //Put into form $form_state['getting_started_obj']-firstname = $firstname; $form_state['getting_started_obj']-lastname = $lastname; $form_state['getting_started_obj']-email = $email; $form_state['getting_started_obj']-phone = $phone; $form_state['getting_started_obj']-newsletter = $newsletter; $form_state['getting_started_obj']-leadid = $leadid; } function choose_lecture_form(&$form, &$form_state){ $one = 'event 1' $two = 'event 2' $three = 'event 3' $getstart = &$form_state['getting_started_obj']; $form['lecture'] = array( '#weight' = '5', '#default_value' = 'two', '#options' = array( 'one' = $one, 'two' = $two, 'three' = $three, ), '#type' = 'radios', '#title' = t('Select Workshop'), '#required' = TRUE, ); $form['attendees'] = array( '#weight' = '6', '#default_value' = 'one', '#options' = array( 'one' = t('I will be arriving alone'), 'two' =t('I will be arriving with a guest'), ), '#type' = 'radios', '#title' = t('Attendees'), '#required' = TRUE, ); $form_state['no buttons'] = TRUE; } /** * Same idea as previous steps submit * */ function choose_lecture_form_submit(&$form, &$form_state) { $workshop = $form_state['values']['lecture']; $leadid = $form_state['getting_started_obj']-leadid; $attendees = $form_state['values']['attendees']; $form_state['getting_started_obj']-lecture = $workshop; $form_state['getting_started_obj']-attendees = $attendees; send_second_form($workshop, $attendees, $leadid); } /*----PART 3 CTOOLS CALLBACKS -- these usually don't have to be very unique ---------------------- */ /** * Callback generated when the add page process is finished. * this is where you'd normally save. */ function getting_started_add_subtask_finish(&$form_state) { dpm($form_state); $getstart = &$form_state['getting_started_obj']; drupal_set_message('mycrazymodule '.$getstart-name.' successfully deployed' ); //Get id // Clear the cache ctools_object_cache_clear('getting_started', $form_state['cache name']); $form_state['redirect'] = 'hellocowboy'; } /** * Callback for the proceed step * */ function getting_started_add_subtask_next(&$form_state) { dpm($form_state); $getstart = &$form_state['getting_started_obj']; $cache = ctools_object_cache_set('getting_started', $form_state['cache name'], $getstart); } /*----PART 4 CTOOLS FORM STORAGE HANDLERS -- these usually don't have to be very unique ---------------------- */ /** * Remove an item from the object cache. */ function getting_started_clear_page_cache($name) { ctools_object_cache_clear('getting_started', $name); } /** * Get the cached changes to a given task handler. */ function getting_started_get_page_cache($name) { $cache = ctools_object_cache_get('getting_started', $name); return $cache; } //Salesforce Functions function send_first_form($lastname, $firstname,$email,$phone, $newsletter){ $send = array("LastName" = $lastname , "FirstName" = $firstname, "Email" = $email ,"Phone" = $phone , "Newsletter__c" =$newsletter ); $sf = salesforce_api_connect(); $response = $sf-client-create(array($send), 'Lead'); dpm($response); return $response-id; } function send_second_form($workshop, $attendees, $leadid){ $send = array("Id" = $leadid , "Number_Of_Pepole__c" = "2" ); $sf = salesforce_api_connect(); $response = $sf-client-update(array($send), 'Lead'); dpm($response, 'the final response'); return $response-id; }

    Read the article

  • Pigs in Socks?

    - by MightyZot
    My wonderful wife Annie surprised me with a cruise to Cozumel for my fortieth birthday. I love to travel. Every trip is ripe with adventure, crazy things to see and experience. For example, on the way to Mobile Alabama to catch our boat, some dude hauling a mobile home lost a window and we drove through a cloud of busting glass going 80 miles per hour! The night before the cruise, we stayed in the Malaga Inn and I crawled UNDER the hotel to look at an old civil war bunker. WOAH! Then, on the way to and from Cozumel, the boat plowed through two beautiful and slightly violent storms. But, the adventures you have while travelling often pale in comparison to the cult of personalities you meet along the way.  :) We met many cool people during our travels and we made some new friends. Todd and Andrea are in the publishing business (www.myneworleans.com) and teaching, respectively. Erika is a teacher too and Matt has a pig on his foot. This story is about the pig. Without that pig on Matt’s foot, we probably would have hit a buoy and drowned. Alright, so…this pig on Matt’s foot…this is no henna tatt, this is a man’s tattoo. Apparently, getting tattoos on your feet is very painful because there is very little muscle and fat and lots of nifty nerves to tell you that you might be doing something stupid. Pig and rooster tattoos carry special meaning for sailors of old. According to some sources, having a tattoo of a pig or rooster on one foot or the other will keep you from drowning. There are many great musings as to why a pig and a rooster might save your life. The most plausible in my opinion is that pigs and roosters were common livestock tagging along with the crew. Since they were shipped in wooden crates, pigs and roosters were often counted amongst the survivors when ships succumbed to Davy Jones’ Locker. I didn’t spend a whole lot of time researching the pig and the rooster, so consider these musings as you would a grain of salt. And, I was not able to find a lot of what you might consider credible history regarding the tradition. What I did find was a comfort, or solace, in the maritime tradition. Seems like raw traditions like the pig and the rooster are in danger of getting lost in a sea of non-permanence. I mean, what traditions are us old programmers and techies leaving behind for future generations? Makes me wonder what Ward Christensen has tattooed on his left foot.  I guess my choice would have to be a Commodore 64.   (I met Ward, by the way, in an elevator after he received his Dvorak awards in 1992. He was a very non-assuming individual sporting business casual and was very much a “sailor” of an old-school programmer. I can’t remember his exact words, but I think they were essentially that he felt it odd that he was getting an award for just doing his work. I’m sure that Ward doesn’t know this…he couldn’t have set a more positive example for a young 22 year old programmer. Thanks Ward!)

    Read the article

  • SQL Server source control from Visual Studio

    - by David Atkinson
    Developers have long since had to context switch between two IDEs, Visual Studio for application code development and SQL Server Management Studio for database development. While this is accepted, especially given the richness of the database development feature set in SSMS, loading a separate tool can seem a little overkill. This is where SQL Connect comes in. This is an add-in to Visual Studio that provides a connected development experience for the SQL Server developer. Connected database development involves modifying a development sandbox database, as opposed to offline development, where SQL text files are modified independently of the database. One of the main complaints of Data Dude (VS DBPro) is that it enforces the offline approach. This gripe is what SQL Connect addresses. If you don't already use SQL Source Control, you can get up and running with SQL Connect by adding a new project to your Visual Studio solution as follows: Then choose your existing development database and you're ready to go. If you already use SQL Source Control, you will need to link SQL Connect to your existing database scripts folder repository, so SQL Connect and SQL Source Control can be used collaboratively (note that SQL Source Control v.3.0.9.18 or later is required). Locate the repository (this can be found in the Setup tab in SQL Source Control). .and create a working folder for it (here I'm using TortoiseSVN). Back in Visual Studio, locate the SQL Connect panel (in the View menu if it hasn't auto loaded) and select Import SQL Source Control project Locate your working folder and click Import. This creates a Red Gate database project under your solution: From here you can modify your development database, and manage your changes in source control. To associate your development database with the project, right click on the project node, select Properties, set the database and Save. Now you're ready to make some changes. Locate the object you'd like to modify in the Solution Explorer, and double click it to invoke a query window or table designer. You also have the option to edit the creation SQL directly using Edit SQL File in Project. Keeping the development database and Visual Studio project in sync is as easy as clicking on a button. One you've made your change, you can use whichever mechanism you choose to commit to source control. Here I'm using the free open-source AnkhSVN to integrate Subversion with Visual Studio. Maintaining your database in a Visual Studio solution means that you can commit database changes and application code changes in the same changeset. This is desirable if you have continuous integration set up as you want to ensure that all files related to a change are committed atomically, so you avoid an interim "broken build". More discussion on SQL Connect and its benefits can be found in the following article on Simple Talk: No More Disconnected SQL Development in Visual Studio The SQL Connect project team is currently assessing the backlog for the next development effort, and they'd appreciate your feature suggestions, as well as your votes on their suggestions site: http://redgate.uservoice.com/forums/140800-sql-connect-for-visual-studio- A 28-day free trial of SQL Connect is available from the Red Gate website. Technorati Tags: SQL Server

    Read the article

  • Revisioning the CeBIT 2011

    - by hechtsuppe
    Hey guys, I am living in the CeBIT's hometown, the beautiful city Hanover. So I am visiting this exhibition since 2002 and I've seen a lot of changes during all this time. But this time, it was the most boring fair I've ever seen. Lets start with the first halls: "The same procedure as every year"- directly behind the entrance are the exhibitioners from far east (China, Taiwan...). In the past, they've shown a lot of nice toys. But this time, they got very serious, the only great gimmick was the motorcycle suitcase for the iPad, I watched the presentation until I reminded myself that I am not owning an iPad and these cases weren't suitable for my BMW motorcycle. So I started looking for the business stuff (I was there for business). I walked deeper in the exhibition area: During the way to the business halls, I came across a hall where I heard a big bass- the gamer's hall I think so I made a quick getaway from there. I saw a lot of teenagers with gaming bags on thier shoulders and I was really confused. I thought 'Damn it is tuesday 11:00 am, the trade fair is opened for public on saturday, why they are here and not at school?'. So the german schools seem to be too easy for students. At the time I was a pupil I visited the CeBIT on saturday! At the business halls: I visited IBM's booth but there were only guys looking like penguins and I weared a white chemise. So nobody was interested in talking to me. At the coffeebar I met a very nice guy from Bangladesh I think he was round about 25, but he told me that he was the first time in germany and he thought that germans are still nazis. I laughed at him and went to DELL. I was really really really interested in client solutions from DELL because I want to get away from our current client manufacturer. At the DELL booth I became recognized and a really nice guy told me where to use which client products. But there were too many people for trying the notebooks so the DELL guy asked for my business card. But I am still waiting for information, dear 'DELL dude'. I went to the Microsoft booth for informing myself about new IT trends. There were nothig new, only a few presentations about the 'new' Windows Live, Windows Phone 7 and 'the allmighty cloud'. But there was a very small presentation corner with the title 'geeks corner'. A guy inside the 'geeks corner' started Visual Studio 2010, I was really agog for the presentation. But then he started talking about Windows Phone 7 and how to program. He began with drag'n drop a textbox and a button on the form. He wrote really basic code and explained the functionality of a textbox- then I stood up and left the room. At the end: Before leaving the fairground, I've visited a few small booths and the big anti-virus program companies. But there was nothing new, I was really disappointed  this year. I've seen only ten exhibition babes and the rest of the week I stood ~3 hours in traffic jams. But I really love the flair in the whole town during this exhibition. The people in the city railways, which are really confused and the people in the pubs. Cheers Vince

    Read the article

  • Strange Happenings

    - by MOSSLover
    There are weeks we go about our life thinking nothing is going to change nothing will happen.  Then there are other weeks a billion things happen at once.  Friday started off very weird for me.  I flew into Atlanta and I met some cool people for another SharePoint event.  I had some good conversations.  Saturday then hit me and my virtual machine bombed in my presentation after the auto updater ran.  I was writing code on the board and describing everything in notepad.  I would say as presentations go it was the best and the worst presentation all wrapped into one.  The next day I was in Baltimore and I hung out with my aunt which was relatively uneventful and great.  Then Monday hit and half my presentations failed or succeeded and my screen freezes so I start describing the code.  I was on top of my game until Monday night.  On top of the world.  I'm exhausted I get into Raleigh and one of the craziest stories of my life happens.  So my boss has been renting cars through Priceline this week I got a different company than the other weeks. The company gives me a Ford Focus and I plug in the coordinates on my IPhone where I want go.  I head out and then I get to the destination hotel (or I thought I did). I go inside it's the wrong hotel the other one is a few miles away.  I walk outside hop into the car and it sounds like a gunshot.  Nothing is starting...Am I doing something wrong?  No I'm not the car is completely dead in the water.  I call the rental car facility and they tell me to call roadside they are closing for the night.  Roadside says they can't give me a new car but they can get me a jump then I have to take it up with the facility.  They send me a tow truck to give me a jump the guy can't jump the car.  He tells me this vehicle was towed about an hour ago.  He shows me a copy of a slip from when he towed it.  We also notice the rental car company left one of there price scanning guns in the vehicle.  I call up roadside and now they are interested in getting me a car because I need to be onsite tomorrow.  They get the manager of the facility on the phone he apologizes profusely and he says he'll be there in 10 minutes.  About 30 minutes pass and him plus another dude show up with a Ford Escape leather interior.  At this point I hand him the gun tell him someone left it in the vehicle and that I'm not so happy with them.  I ask them to comp my rental they can't due to Priceline, however if I call him again this week he can get me a voucher.  It's about 2 am and I'm ready to get to the hotel I don't make it in the next morning until 10 am.  I would say this was a crazy week all forms of technology are trying to tell me something.  What I have no idea, but we'll see the outcome soon.  I feel so weird tons of change is about to happen.  I don't know if it's good or bad.  I think this week is some form of omen.

    Read the article

  • Always can't separate these guys: ascending and descending! Are there good examples?

    - by mystify
    As a non-english dude, I have trouble differentiating this. When I try to translate this into my language, I get something weird like "go up" for ascending. So lets say I want to sort the names of all my pets alphabetically. I want that A comes first, then B, then C... and so on. So since the alphabet is not a number for me, my brain refuses to grok what's "going up". A = 0? B = 1? C = 2? If yes, then ascending would be what I'm most of the time looking for. Table would start showing A, then B, then C... Or is that the other way around? Must I look from the bottom of the table, up? And with numbers: If it's an ascending order, the smallest comes first? (would seem logical...) Can someone post a short but good example for what is an ascending sort order, and what is an descending sort order? And does that apply to whatever platform, programming language, API, etc.?

    Read the article

  • Transition from 2D to 3D later in game development

    - by Axarydax
    Hi, I'd like to work on a game, but for rapidly prototyping it, I'd like to keep it as simple as possible, so I'd do everything in top-down 2D in GDI+ and WinForms (hey, I like them!), so I can concentrate on the logic and architecture of the game itself. I thinking about having the whole game logic (server) in one assembly, where the WinForms app would be a client to that game, and if/when the time is right, I'd write a 3D client. I am tempted to use XNA, but I haven't really looked into it, so I don't know if it won't take too much time getting up to speed - I really don't want to spent much time doing other stuff than the game logic, at least while I have the inspiration. But I wouldn't have to abandon everything and transfer to new platform when transitioning from 2D to 3D. Another idea is just to get over it and learn XNA/Unity/SDL/something at least to that level so I can make the same 2D version as I could in GDI+, and I won't have to worry about switching frameworks anymore. Let's just say that the game is the kind where you watch a dude from behind, you run around the gameworld and interact with objects. So the bird's eye perspective could be doable for now. Thanks.

    Read the article

  • General question about DirectShow.NET, DirectShow and Windows Media Format

    - by Paul Andrews
    I searched and googled for an answer but couldn't find one. Basically I'm developing a webcam/audio streaming application which should capture audio and video from a pc (usb webcam/microphone) and send them to a receiving server. What the server will do with that it's another story and phase two (which I'm skipping for now) I wrote some code using DirectShow and Windows Media Format and it worked great for capture audio/video and sending them to another client, but there's a major problem: latency. Everywhere in the internet everyone gave me the same answer: "sorry dude but media format isn't for video conferencing, their codecs have too high latency". I thought I could skip the .wmv problems but seems like it's not possible to do... this road ends here then. So I saw a few examples with DirectShow.NET which were faster for both audio and video.. my question is: how come that DirectShow.NET is faster and better for video/audio conferencing? Shouldn't it be just a .NET porting of C++'s DirectShow? Am I missing something? I'm a bit confused at this point

    Read the article

  • How do I create a multi-level TreeView using F#?

    - by TwentyMiles
    I would like to display a directory structure using Gtk# widgets through F#, but I'm having a hard time figuring out how to translate TreeViews into F#. Say I had a directory structure that looks like this: Directory1 SubDirectory1 SubDirectory2 SubSubDirectory1 SubDirectory3 Directory2 How would I show this tree structure with Gtk# widgets using F#? EDIT: gradbot's was the answer I was hoping for with a couple of exceptions. If you use ListStore, you loose the ability to expand levels, if you instead use : let musicListStore = new Gtk.TreeStore([|typeof<String>; typeof<String>|]) you get a layout with expandable levels. Doing this, however, breaks the calls to AppendValues so you have to add some clues for the compiler to figure out which overloaded method to use: musicListStore.AppendValues (iter, [|"Fannypack" ; "Nu Nu (Yeah Yeah) (double j and haze radio edit)"|]) Note that the columns are explicitly passed as an array. Finally, you can nest levels even further by using the ListIter returned by Append Values let iter = musicListStore.AppendValues ("Dance") let subiter = musicListStore.AppendValues (iter, [|"Fannypack" ; "Nu Nu (Yeah Yeah) (double j and haze radio edit)"|]) musicListStore.AppendValues (subiter, [|"Some Dude"; "Some Song"|]) |> ignore

    Read the article

  • parsing css measures

    - by david
    When i write a jQuery plugin i like to specify options for spacings the CSS way. I wrote a function that returns a CSS String as values in a object. 5px 10px returns top: 5px, right: 10px, bottom: 5px, left: 10px Now i often use the returned values to do some calculations and its not very nice to have to extract the measuring unit every time... I suck in writing regular expressions could someone help me complete this function: this.cssMeasure = function(cssString, separateUnits){ if ( cssString ){ var values = {} }else{ return errorMsg } var spacing = cssString.split(' ') var errorMsg = 'please format your css values correctly dude' if( spacing[4] || (spacing[2] && !spacing[3]) ) { return errorMsg } else if ( spacing[3] ) { values = {top: spacing[0], right:spacing[1], bottom:spacing[2], left:spacing[3]} } else if ( spacing[1] ) { values = {top: spacing[0], right:spacing[1], bottom:spacing[0], left:spacing[1]} } else { values = {top: spacing[0], right:spacing[0], bottom:spacing[0], left:spacing[0]} } if (separateUnits) { $.each(values, function(i, value){ /* at this place i need to extract the measuring unit of each value and return them separately something like top: {value: 10, unit: 'px'}, right: {bla} and so on */ }) } return values } if you have any idea how to improve this function i am open to your comments.

    Read the article

  • ASP.NET auto-generate aspx.designer.cs turn off?

    - by Joris
    Hey all, As I'm working on a asp.net/c# project, I'm confronted with the foobar.aspx.designer.cs that auto generates it's content. eg, when I'm changing the code/designer, the designer.cs automatically updates it's content. As I'm bit of a control-dude, I'd like to maintain the code myself. I'm not happy with the overkill of comments I don't need. Like: /// <summary> /// Form1 control. /// </summary> /// <remarks> /// Auto-generated field. /// To modify move field declaration from designer file to code-behind file. /// </remarks> protected global::System.Web.UI.HtmlControls.HtmlForm Form1; While I'd like to see the following: protected global::System.Web.UI.HtmlControls.HtmlForm Form1; protected global::System.Web.UI.WebControls.Button Button3; etc, etc (don't mind the naming, ofcourse I'd give it some distinguishing nameing) How to fix this? I checked google on this one, but couldn't find an answer so quickly...

    Read the article

  • What is the purpose of unit testing an interface repository

    - by ahsteele
    I am unit testing an ICustomerRepository interface used for retrieving objects of type Customer. As a unit test what value am I gaining by testing the ICustomerRepository in this manner? Under what conditions would the below test fail? For tests of this nature is it advisable to do tests that I know should fail? i.e. look for id 4 when I know I've only placed 5 in the repository I am probably missing something obvious but it seems the integration tests of the class that implements ICustomerRepository will be of more value. [TestClass] public class CustomerTests : TestClassBase { private Customer SetUpCustomerForRepository() { return new Customer() { CustId = 5, DifId = "55", CustLookupName = "The Dude", LoginList = new[] { new Login { LoginCustId = 5, LoginName = "tdude" }, new Login { LoginCustId = 5, LoginName = "tdude2" } } }; } [TestMethod] public void CanGetCustomerById() { // arrange var customer = SetUpCustomerForRepository(); var repository = Stub<ICustomerRepository>(); // act repository.Stub(rep => rep.GetById(5)).Return(customer); // assert Assert.AreEqual(customer, repository.GetById(5)); } } Test Base Class public class TestClassBase { protected T Stub<T>() where T : class { return MockRepository.GenerateStub<T>(); } } ICustomerRepository and IRepository public interface ICustomerRepository : IRepository<Customer> { IList<Customer> FindCustomers(string q); Customer GetCustomerByDifID(string difId); Customer GetCustomerByLogin(string loginName); } public interface IRepository<T> { void Save(T entity); void Save(List<T> entity); bool Save(T entity, out string message); void Delete(T entity); T GetById(int id); ICollection<T> FindAll(); }

    Read the article

  • Do I want an embedded web-server, or what?

    - by mawg
    So, someone want me to hack some code for him. He has a 42" TFT display on which he will display some application/business related data. However, 75% of the screen real estate is unused, so he wants to fill it with "TV/adverts/flash/you know, that kind of thing... web based....". Any advice? Do I want an embedded web-server? If so, which? (he wants free & open source, or as cheap as possible) Do I display it in a browser? (duh! probably, dude) But I don't want/need a menu, address bar, toolbar, etc - it should be full screen (does that mean "kiosk mode"?). Sorry, folks, the requirements are not clear, but I hope that you can guess what he probably means (he is not very techie). How should I proceed with this? Thanks.

    Read the article

  • Getting an updated location in Android

    - by jul
    Hi, I'm using the code shown below to get an updated value for location every time a button is clicked. When my activity is resumed I get an update every second, so that when I call getLastKnownLocation I expect to have a location that have been updated in the last second. Is that the correct way to do that? I would expect the onLocationChanged event to be triggered every time I execute a 'geo fix' command (or max after 1s since I request update every 1s), but it's only triggered the first time. Why? Any help/suggestion welcome! Thanks package org.digitalfarm.atable; ... public class Atable extends Activity { private Button mSearchButton; private TextView mytext; private LocationManager locationManager; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); mSearchButton = (Button)this.findViewById(R.id.button); mytext = (TextView) findViewById(R.id.dude); locationManager = (LocationManager)getSystemService(Context.LOCATION_SERVICE); final Criteria criteria = new Criteria(); criteria.setAccuracy(Criteria.ACCURACY_FINE); mSearchButton.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { String provider = locationManager.getBestProvider(criteria, true); Location location = locationManager.getLastKnownLocation(provider); } }); } //Start a location listener LocationListener onLocationChange=new LocationListener() { public void onLocationChanged(Location loc) { //sets and displays the lat/long when a location is provided String latlong = "Lat: " + loc.getLatitude() + " Long: " + loc.getLongitude(); mytext.setText(latlong); } public void onProviderDisabled(String provider) { // required for interface, not used } public void onProviderEnabled(String provider) { // required for interface, not used } public void onStatusChanged(String provider, int status, Bundle extras) { // required for interface, not used } }; //pauses listener while app is inactive @Override public void onPause() { super.onPause(); locationManager.removeUpdates(onLocationChange); } //reactivates listener when app is resumed @Override public void onResume() { super.onResume(); locationManager.requestLocationUpdates(LocationManager.GPS_PROVIDER,1000,100.0f,onLocationChange); } }

    Read the article

  • Why does my jQuery/YQL call not return anything?

    - by tastyapple
    I'm trying to access YQL with jQuery but am not getting a response: http://jsfiddle.net/tastyapple/grMb3/ Anyone know why? $(function(){ $.extend( { _prepareYQLQuery: function (query, params) { $.each( params, function (key) { var name = "#{" + key + "}"; var value = $.trim(this); if (!value.match(/^[0-9]+$/)) { value = '"' + value + '"'; } query = query.replace(name, value); } ); return query; }, yql: function (query) { var $self = this; var successCallback = null; var errorCallback = null; if (typeof arguments[1] == 'object') { query = $self._prepareYQLQuery(query, arguments[1]); successCallback = arguments[2]; errorCallback = arguments[3]; } else if (typeof arguments[1] == 'function') { successCallback = arguments[1]; errorCallback = arguments[2]; } var doAsynchronously = successCallback != null; var yqlJson = { url: "http://query.yahooapis.com/v1/public/yql", dataType: "jsonp", success: successCallback, async: doAsynchronously, data: { q: query, format: "json", env: 'store://datatables.org/alltableswithkeys', callback: "?" } } if (errorCallback) { yqlJson.error = errorCallback; } $.ajax(yqlJson); return $self.toReturn; } } ); $.yql( "SELECT * FROM github.repo WHERE id='#{username}' AND repo='#{repository}'", { username: "jquery", repository: "jquery" }, function (data) { if (data.results.repository["open-issues"].content > 0) { alert("Hey dude, you should check out your new issues!"); } } ); });

    Read the article

  • Why it's important to specify the complete class name in your association when using namespaces

    - by Carmine Paolino
    In my Rails application there is a model that has some has_one associations (this is a fabricated example): class Person::Admin < ActiveRecord::Base has_one :person_monthly_revenue has_one :dude_monthly_niceness accepts_nested_attributes_for :person_monthly_revenue, :dude_monthly_niceness end class Person::MonthlyRevenue < ActiveRecord::Base belongs_to :person_admin end class Dude::MonthlyNiceness < ActiveRecord::Base belongs_to :person_admin end The application talks to a backend that computes some data and returns a piece of JSON like this: { "dude_monthly_niceness": { "february": 1.1153232569518972, "october": 1.1250217200558268, "march": 1.3965786869658541, "august": 1.6293418014601631, "september": 1.4062771500697835, "may": 1.7166279693955291, "january": 1.0086401628086725, "june": 1.5711510228365859, "april": 1.5614525597326563, "december": 0.99894169970474289, "july": 1.7263264324994585, "november": 0.95044938418509506 }, "person_monthly_revenue": { "february": 10.585596551505297, "october": 10.574823016656749, "march": 9.9125274764852787, "august": 9.2111604702328922, "september": 9.7905249446675153, "may": 9.1329712474607962, "january": 10.479614016604238, "june": 9.3710235926961936, "april": 9.5897372624830304, "december": 10.052587677671438, "july": 8.9508877843925561, "november": 10.925339756096172 }, } To deserialize it, I use ActiveRecord's from_json, but instead of a Person::Admin object with all the associations in place, I get this error: >> Person::Admin.new.from_json(json) NameError: uninitialized constant Person::Admin::DudeMonthlyNiceness Am I doing something wrong? Is there a better way to deserialize data? (I can modify the backend easily) UPDATE: the original title was "How to deserialize from json to ActiveRecord objects with associations?" but it ended up being my mistake in specifying associations so I changed the title.

    Read the article

  • Android: New app not showing on a sprint phone...

    - by Allan
    I uploaded my app to the Android Market last week and people have been purchasing it with no problems. My carrier is T-Mobile. As soon as I uploaded my app to the Market I got on my phone (Nexus One), searched for it, and there it was - instantly! (Is that because I have a google phone?) My friends G1 found it instantly also. BUT, another friend has a Sprint Moment phone and when he tried to search for it - it just wasn't there - like it didn't exist. I then called T-Mobile and Sprint representatives and found some information that I didn't know. The Sprint dude said that Sprint goes to some sort of massive Android Market Database and that's how Sprint knows about new apps and is then able to list them. New apps are not instantly shown on Sprint phones, you have to wait till their database updates to Android's database. At least that is what I thought they were trying to say to me. Has anyone else come across this issue and/or does anyone know how long Sprint takes to update their database for new Android apps? Do other carriers follow these methods?

    Read the article

  • Find messages from certain key till certain key while being able to remove stale keys.

    - by Alfred
    My problem Let's say I add messages to some sort of datastructure: 1. "dude" 2. "where" 3. "is" 4. "my" 5. "car" Asking for messages from index[4,5] should return: "my","car". Next let's assume that after a while I would like to purge old messages because they aren't useful anymore and I want to save memory. Let's say at time x messages[1-3] became stale. I assume that it would be most efficient to just do the deletion once every x seconds. Next my datastructure should contain: 4. "my" 5. "car" My solution? I was thinking of using a concurrentskiplistset or concurrentskiplist map. Also I was thinking of deleting the old messages from inside a newSingleThreadScheduledExecutor. I would like to know how you would implement(efficiently/thread-safe) this or maybe use a library?

    Read the article

  • Sysadmin 101: How can I figure out why my server crashes and monitor performance?

    - by bflora
    I have a Drupal-powered site that seems to have neverending performance problems. It was butt-slow about 5 months ago. I brought in some guys who installed nginx for anonymous visitors, ajaxified a few queries so they wouldn't fire during page load, and helped me find a few bottlenecks in the code. For about a month, the site was significantly faster, though not "fast" by any stretch of the word. Meanwhile, I'm now shelling out $400/month to Slicehost to host a site that gets less than 5,000/uniques a day. Yes, you read that right. Go Drupal. Recently the site started crashing again and is slow again. I can't afford to hire people to come in, study my code from top to bottom, and make changes that may or may not help anymore. And I can't afford to throw more hardware at the problem. So I need to figure out what the problem is myself. Questions: When apache crashes, is it possible to find out what caused it to crash? There has to be a way, right? If so, how can I do this? Is there software I can use that will tell me which process caused my server to die? (e.g. "Apache crashed because someone visited page X." or "Apache crashed because you were importing too many RSS items from feed X.") There's got to be a way to learn this, right? What's a good, noob-friendly way to monitor my current apache performance? My developer friends tell me to "just use Top, dude," but Top shows me a bunch of numbers without any context. I have no clue what qualifies as a bad number or a good number in Top, or which processes are relevant and which aren't. Are there any noob-friendly server monitoring tools out there? Ideally, I could have a page that would give me a color-coded indicator about how apache is performing and then show me a list of processes or pages that are sucking right now. This way, I could know when performance is bad and then what's causing it to be so bad. Why does PHP memory matter? My apparently has a 30MB memory foot print. Will it run faster if I bring that number down? Thanks for any advice. I spent a year or so trying to boost my advertising income so I could hire a contractor to solve my performance woes. I didn't want to have to learn all this sysadmin voodoo. I'm now resigned to the fact that might not have a choice.

    Read the article

  • UCARP: prevent the original master from taking over the VIP when it comes back after failure?

    - by quanta
    Keepalived can do this by combining the nopreempt option and the BACKUP state on the both nodes: Prevent VRRP Master from becoming Master once it has failed Prevent master to fall back to master after failure How about the UCARP? Name : ucarp Arch : x86_64 Version : 1.5.2 Release : 1.el5.rf Size : 81 k Repo : installed Summary : Common Address Redundancy Protocol (CARP) for Unix URL : http://www.ucarp.org/ License : BSD Description: UCARP allows a couple of hosts to share common virtual IP addresses in order : to provide automatic failover. It is a portable userland implementation of the : secure and patent-free Common Address Redundancy Protocol (CARP, OpenBSD's : alternative to the patents-bloated VRRP). : Strong points of the CARP protocol are: very low overhead, cryptographically : signed messages, interoperability between different operating systems and no : need for any dedicated extra network link between redundant hosts. If I don't use the --preempt option and set the --advskew to the same value, both nodes become master. /etc/sysconfig/carp/vip-010.conf # Virtual IP configuration file for UCARP # The number (from 001 to 255) in the name of the file is the identifier # $Id: vip-001.conf.example 1527 2004-07-09 15:23:54Z dude $ # Set the same password on all mamchines sharing the same virtual IP PASSWORD="pa$$w0rd" # You are required to have an IPADDR= line in the configuration file for # this interface (so no DHCP allowed) BIND_INTERFACE="eth0" # Do *NOT* use a main interface for the virtual IP, use an ethX:Y alias # with the corresponding /etc/sysconfig/network-scripts/ifcfg-ethX:Y file # already configured and ith ONBOOT=no VIP_INTERFACE="eth0:0" # If you have extra options to add, see "ucarp --help" output # (the lower the "-k <val>" the higher priority and "-P" to become master ASAP) OPTIONS="-z -k 255" /etc/sysconfig/network-scripts/ifcfg-eth0:0 DEVICE=eth0:0 ONBOOT=no BOOTPROTO= IPADDR=192.168.6.8 NETMASK=255.255.255.0 USERCTL=yes IPV6INIT=no node 1: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether c6:9b:8e:af:a7:69 brd ff:ff:ff:ff:ff:ff inet 192.168.6.192/24 brd 192.168.6.255 scope global eth0 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth0:0 inet6 fe80::c49b:8eff:feaf:a769/64 scope link valid_lft forever preferred_lft forever node 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:48:f7:0f:81 brd ff:ff:ff:ff:ff:ff inet 192.168.6.38/24 brd 192.168.6.255 scope global eth1 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth1:0 inet6 fe80::230:48ff:fef7:f81/64 scope link valid_lft forever preferred_lft forever

    Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >