Search Results

Search found 141 results on 6 pages for 'h264'.

Page 5/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• How to convert dvr-ms file in Ubuntu to DVD?

  - by edmicman

  I have a .dvr-ms file of a recorded TV show from my Vista Media Center. I would like to burn this to a DVD that can play on any standalone DVD player. My main PC that I want to use to convert it to a DVD format is running Ubuntu 10.04. I am able to play the file in Ubuntu using VLC (which surprised me) so I'm assuming I have what I need to decode it. I guess my questions are: What format do I need to convert this file to so that I could burn it to a playable DVD? I started to go through VLC's conversion process and chose I think H264 and AAC or something, and it gave a message about not having an AAC encoder. I'll look into that some more tonight, but is that something I could then burn to a DVD? Thanks for any help!

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• ffmpeg error while segmenting

  - by Tommy Ng

  I'm using ffmpeg and segmenter on Ubuntu 10.04 to create the transport stream from flv/h264 video files and then segment the ts segments for ipad streaming. Some ts files show an error with segmenter - Output #0, mpegts, to '29': Stream #0.0: Video: 0x0000, yuv420p, 480x360, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: 0x0000, 0 channels, s16 [mpegts @ 0x11f4ac0]sample rate not set Could not write mpegts header to first output file my ffmpeg command for creating the ts file - ffmpeg -i 1.flv -f mpegts -acodec libfaac -ar 48000 -ab 64k -s 480x360 -vcodec libx264 -b 192k -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -subq 5 -trellis 1 -refs 1 -coder 0 -me_range 16 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -bt 200k -maxrate 192k -bufsize 192k -rc_eq 'blurCplx^(1-qComp)' -qcomp 0.6 -qmin 10 -qmax 51 -qdiff 4 -level 30 -aspect 480:360 -g 30 -async 2 -y 1.ts my segmenter command - segmenter 1.ts 10 1 1.m3u8 path/to/streams/

  Read the article

• How do I add and/or keep subtitles when converting video?

  - by JoeSteiger

  I have a mkv video I want to convert to mp4, but every which way I try and convert it (Handbrake, WinFF, ffmpeg, mencoder,...I lose the video's subtitles. How can I convert the video,keeping the subtitles, or add a subtitles.srt? I also would like 2 pass encoding with a video bitrate of 4054 and audio bitrate of 160. Thanks. I was asked for the ffmpeg -i: joe@joe-Leopard-Extreme:/media/Elements/Home Folder/Videos$ ffmpeg -i iron.mkv ffmpeg version 0.8.3-4:0.8.3-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Jun 12 2012 16:52:09 with gcc 4.6.3 *** THIS PROGRAM IS DEPRECATED *** This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. [matroska,webm @ 0x1a319a0] Estimating duration from bitrate, this may be inaccurate Input #0, matroska,webm, from 'iron.mkv': Metadata: title : Iron Duration: 02:06:01.67, start: 0.000000, bitrate: 1280 kb/s Chapter #0.0: start 0.000000, end 546.170622 Metadata: title : Chapter 00 Chapter #0.1: start 546.170622, end 1080.579489 Metadata: title : Chapter 01 Chapter #0.2: start 1080.579489, end 1609.941667 Metadata: title : Chapter 02 Chapter #0.3: start 1609.941667, end 2101.849733 Metadata: title : Chapter 03 Chapter #0.4: start 2101.849733, end 2595.259333 Metadata: title : Chapter 04 Chapter #0.5: start 2595.259333, end 3158.488667 Metadata: title : Chapter 05 Chapter #0.6: start 3158.488667, end 3564.644400 Metadata: title : Chapter 06 Chapter #0.7: start 3564.644400, end 4052.423356 Metadata: title : Chapter 07 Chapter #0.8: start 4052.423356, end 4304.300000 Metadata: title : Chapter 08 Chapter #0.9: start 4304.300000, end 4711.206489 Metadata: title : Chapter 09 Chapter #0.10: start 4711.206489, end 5080.575489 Metadata: title : Chapter 10 Chapter #0.11: start 5080.575489, end 5700.111067 Metadata: title : Chapter 11 Chapter #0.12: start 5700.111067, end 6269.346400 Metadata: title : Chapter 12 Chapter #0.13: start 6269.346400, end 6811.471333 Metadata: title : Chapter 13 Chapter #0.14: start 6811.471333, end 7561.679000 Metadata: title : Chapter 14 Stream #0.0(eng): Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc Stream #0.1(eng): Audio: ac3, 48000 Hz, 5.1, s16, 640 kb/s (default) Metadata: title : 3/2+1 Stream #0.2(ita): Audio: ac3, 48000 Hz, 5.1, s16, 640 kb/s Metadata: title : 3/2+1 Stream #0.3(eng): Subtitle: pgssub (default) Stream #0.4(eng): Subtitle: pgssub Stream #0.5(eng): Subtitle: pgssub Stream #0.6(eng): Subtitle: pgssub At least one output file must be specified joe@joe-Leopard-Extreme:/media/Elements/Home Folder/Videos

  Read the article

• VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

  - by Aaron

  I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Recording slow web stream

  - by Budric

  I'm trying to record an mpeg2 video stream from a website that doesn't have the greatest bandwidth. The video often buffers. I want to download the stream and watch it offline. The extract stream format received is: Stream #0.0[0x44]: Audio: mp2, 48000 Hz, stereo, s16, 192 kb/s Stream #0.1[0x45]: Video: mpeg2video (Main), yuv420p, 704x576 [PAR 16:11 DAR 16:9], 15000 kb/s, 27.19 fps, 25 tbr, 90k tbn, 50 tbc I use the following tool to transocde the stream: ffmpeg -i "http://url" -y -vcodec libx264 -b 3000k -acodec copy /tmp/stream.mp4 Unfortunately after a few seconds ffmpeg stops recording with an error [mpegts @ 0x1f0b9c0] PES packet size mismatch [mp2 @ 0x1f14640] incomplete frame Error while decoding stream #0.0 [mpeg2video @ 0x1f16860] ac-tex damaged at 0 26 [mpeg2video @ 0x1f16860] Warning MVs not available I've tried encoding with vlc as well with similar issues. Although vlc doesn't stop encoding, the output video has regions where it hangs. vlc -I dummy "http://url" --network-caching="1000" --sout="#transcode{vcodec=h264,vb=3000,acodec=mp3,ab=192}:std{access=file,mux=mp4,dst=/tmp/stream.mp4}" [mpeg2video @ 0x7f2d4c001e20] ac-tex damaged at 9 33 [mpeg2video @ 0x7f2d4c001e20] Warning MVs not available [mpeg2video @ 0x7f2d4c001e20] concealing 132 DC, 132 AC, 132 MV errors [mpeg2video @ 0x7f2d4c001e20] ac-tex damaged at 16 17 [mpeg2video @ 0x7f2d4c001e20] Warning MVs not available [mpeg2video @ 0x7f2d4c001e20] concealing 836 DC, 836 AC, 836 MV errors libdvbpsi error (PSI decoder): TS discontinuity (received 4, expected 3) for PID 0 I also tried flv transcoding and it shows up with its own set of issues, like output flv file hangs in certain parts. Anyone know what's wrong or how to fix this?

  Read the article

• Multiple displays using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• Triple-display setup using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• iphone - How do I add videos to iPad simulator?

  - by Mike

  No, dropping the videos to ~/Library/Application Support/iPhone Simulator/3.2/Media/DCIM/100APPLE does not work totally, because the simulator can see the video on Photos.app, but when I try to pick a video using UIImagePickerController my application crashes. I think this may have some relation to the format the video has to have. I am using QuickTime to generate the video. I am using the settings "for iPhone"... so it is generating a M4V with 480x360 pixels H264. I have tried to create a MOV with the same characteristics and one with 640x480 but nothing works. I have also dropped a movie created with iPhone 3GS and it still crashes. this is the error I see when it crashes * Terminating app due to uncaught exception 'NSRangeException', reason: '* -[NSCFArray objectAtIndex:]: index (1) beyond bounds (0)' the method didFinishPickingMediaWithInfo is never called, so its some issue on the simulator or on the video. The app crashes as soon as I pick the video. any ideas? thanks.

  Read the article

• Best cheap GUI for converting to f4v

  - by Ben

  Hi, I need to give one client the ability to convert some videos to f4v h264 before loading it up to an AIR app. I normally doing with the Adobe Media Encoder CS4 but that only ships with adobe products (you can't download it as a free standalone app - which, start rant is odd, you'd think they would push the format - Microsoft's competing expresssion encoder is free end rant) Anyway, I need to get a (hopefully not too expensive, but willing to pay for it) good 3rd part app that can take any video and convert it to an f4v. Can you suggest any? Everything i've found is horrible or jammed with ads and crap. What would you use? Any suggestion? (please don't just say ffmpeg - I know it can do it but we need to good simple GUI) Thanks!

  Read the article

• Get ffmpeg information in friendly way

  - by JBernardo

  Every time I try to get some information about my video files with ffmpeg, it pukes a lot of useless information mixed with good things. I'm using ffmpeg -i name_of_the_video.mpg. There are any possibilities to get that in a friendly way? I mean JSON would be great (and even ugly XML is fine). By now, I made my application parse the data with regex but there are lots of nasty corners that appear on some specific video files. I fixed all that I encountered, but there may be more. I wanted something like: { "Stream 0": { "type": "Video", "codec": "h264", "resolution": "720x480" }, "Stream 1": { "type": "Audio", "bitrate": "128 kbps", "channels": 2 } }

  Read the article

• Splitting an MP4 file

  - by Asaf Chertkoff

  what is the fastest and less resource consuming method for splitting an MP4 file? @Alex: it didn't work, i don't know why. see the out put here: asafche@asafche-laptop:~$ ffmpeg -vcodec copy -ss 0 -t 00:10:00 -i /home/asafche/Videos/myVideos/MAH00124.MP4 /home/asafche/Videos/myVideos/eh.mp4 FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 31 2011 18:53:20, gcc: 4.4.3 Seems stream 0 codec frame rate differs from container frame rate: 119.88 (120000/1001) -> 59.94 (60000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/home/asafche/Videos/myVideos/MAH00124.MP4': Duration: 00:15:35.96, start: 0.000000, bitrate: 5664 kb/s Stream #0.0(und): Video: h264, yuv420p, 1280x720, 59.94 tbr, 59.94 tbn, 119.88 tbc Stream #0.1(und): Audio: aac, 48000 Hz, stereo, s16 Output #0, mp4, to '/home/asafche/Videos/myVideos/eh.mp4': Stream #0.0(und): Video: libx264, yuv420p, 1280x720, q=2-31, 90k tbn, 59.94 tbc Stream #0.1(und): Audio: 0x0000, 48000 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Unsupported codec for output stream #0.1 it says something about different frame rate...

  Read the article

• VLC (Server) re-stream Security Camera Feed

  - by Aaron

  I purchased a Swann Home Security DVR system and was hoping for some help on how to duplicate the streaming video on my server. In order to get their web view (streaming video in the browser) to work, I had to install the following plugins: HiDvrPlugin.dmg for mac. Hidvrocx.cab for Windows. I was originally thinking it was a sign of some form of DRM? Maybe. Maybe not. HTML wise, the following code is in the source of the safari version of the web view: <embed pluginspage="SurveilClient.dmg" width="10px" height="10px" type="application/x-scplugin" id="MacDiv" style="height: 592px; width: 720px; left: 278px; top: 61px; "> It seems to be the main display area. Using wireshark, I am able to see that the video stream is on port 9000. However, I have no idea what type of stream it is. I've tried opening it in VLC with no such luck. http://dvr_ip:9000 tcp://dvr_ip:9000 My hope was to do the following to redistribute the feed vlc dvr_ip:9000 --sout h264-version-on-localhost:3000 TLDR; Trying to re-distribute a stream from a security camera (can't tell the format) using vlc (re-distribute via h.264 / HTML5). Not sure how to accomplish this. Is it possible that the software has some type of DRM that only the plugins can decode?

  Read the article

• On a dual-GPU laptop, is using the discrete GPU ever more power efficient?

  - by Mahmoud Al-Qudsi

  Given a laptop with a dual integrated/discrete GPU configuration, is it ever more power efficient to use the discrete GPU instead of the integrated? Obviously when writing an email or working on a spreadsheet, the integrated GPU will always use less power. But let's say you're doing something graphics-medium but not graphics-intensive/heavy - is there a point where it actually makes sense to fire up the discrete GPU, not for performance but for power-saving reasons? Off the top of my head, I can think of a scenario where the external GPU supports hardware decoding of a particular video codec - I'd imagine there is a "price point" where using the GPU saves more energy than decoding that fully in software would. But I think most GPUs, integrated or discrete, pretty much decode just the plain-Jane h264. But maybe there is something more complicated, perhaps if you're doing something like desktop/windowing animations or a flash animation on a website (not an embedded flash video) - maybe the discrete GPU will use enough less power to make up for switching to it? I guess this question can be summed up as to whether or not you can say beyond doubt that if you don't care for performance on a laptop with two GPUs, always use the integrated GPU for maximum battery life.

  Read the article

• Join mp4 files in linux

  - by Jose Armando

  I want to join two mp4 files to create a single one. The video streams are encoded in h264 and the audio in aac. I can not re-encode the videos to another format due to computational reasons. Also, I cannot use any gui programs, all processing must be performed with linux command line utilities. FFmpeg cannot do this for mpeg4 files so instead I used MP4Box e.g. MP4Box -add video1.mp4 -cat video2.mp4 newvideo.mp4 unfortunately the audio gets all mixed up. I thought that the problem was that the audio was in aac so I transcoded it in mp3 and used again MP4Box. In this case the audio is fine for the first half of newvideo.mp4 (corresponding to video1.mp4) but then their is no audio and I cannot navigate in the video also. My next thought was that the audio and video streams had some small discrepancies in their lengths that I should fix. So for each input video I splitted the video and audio streams and then joined them with the -shortest option in ffmpeg. thus for the first video I ran avconv -y -i video1.mp4 -c copy -map 0:0 videostream1.mp4 avconv -y -i video1.mp4 -c copy -map 0:1 audiostream1.m4a avconv -y -i videostream1.mp4 -i audiostream1.m4a -c copy -shortest video1_aligned.mp4 similarly for the second video and then used MP4Box as previously. Unfortunately this didn't work either. The only success I had was when I joined the video streams separetely (i.e. videostream1.mp4 and videostream2.mp4) and the audio streams (i.e. audiostream1.m4a and audiostream2.m4a) and then joined the video and audio in a final file. However, the synchronization is lost for the second half of the video. Concretelly, there is a 1 sec delay of audio and video. Any suggestions are really welcome.

  Read the article

• newsubtitles line not working in FFmpeg

  - by godMode

  i'm trying to run the following line on FFmpeg that will basically "re-format" an MKV file to MP4 without doing any re-encoding and also embed SRT subtitles onto the MP4 output: ffmpeg -i test.mkv -i test.srt -newsubtitle -acodec copy -vcodec copy test.mp4 Without the "-i test.srt -nwesubtitle" bit, it seems to work just fine; however, with it I get the following output: Seems stream 0 codec frame rate differs from container frame rate: 47.95 (5000000/104271) - 23.98 (24000/1001) Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc Stream #0.1(eng): Subtitle: 0x0000 Metadata: title : English Stream #0.2(jpn): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : Japanese 2.0 Stream #0.3(eng): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : English 2.0 Stream #0.4(eng): Subtitle: 0x0000 Metadata: title : English Songs & Signs Stream #0.5: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.6: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.7: Attachment: 0x0000 Metadata: filename : ChaparralPro-BoldIt.ttf Stream #0.8: Attachment: 0x0000 Metadata: filename : ChaparralPro-SemiboldIt.ttf Stream #0.9: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.10: Attachment: 0x0000 Metadata: filename : epminbld_opening.ttf Stream #0.11: Attachment: 0x0000 Metadata: filename : Folks-Bold.ttf Stream #0.12: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.13: Attachment: 0x0000 Metadata: filename : WarnockPro-LightDisp.ttf Stream #0.14: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.15: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.16: Attachment: 0x0000 Metadata: filename : Marker SD 1.2.ttf Stream #0.17: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.18: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.19: Attachment: 0x0000 Metadata: filename : MyriadPro-SemiCn.ttf test.srt: Invalid data found when processing input I tried adding "-r pal", "-r ntsc" or "-r 23.98" thinking it was framerate issue with no change.

  Read the article

• avconv gets killed if mkv has subtitles

  - by Lukas Knuth

  What I'm trying to do is to take a movie (in an Matroska container), convert all audio tracks to AC3 and don't touch anything else. I'm using this line: avconv -i infile.mkv -map 0 -vcodec copy -scodec copy -acodec ac3 -ab 256k outfile.mkv This works fine, except when there are subtitles embedded. Then, after some time processing with no progress, avconv just "dies" (output shortened, these seem to be the interesting parts): [matroska,webm @ 0xf867a0] max_analyze_duration reached [matroska,webm @ 0xf867a0] Estimating duration from bitrate, this may be inaccurate ... Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' ... Stream #0.0(eng): Video: H264 / 0x34363248, yuv420p, 1280x536 [PAR 1:1 DAR 160:67], q=2-31, 1k tbn, 1k tbc (default) Stream #0.1(ger): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s (default) Stream #0.2(eng): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s Stream #0.3(ger): Subtitle: dvdsub (default) (forced) Metadata: title : forced Stream #0.4(ger): Subtitle: dvdsub Metadata: title : complete Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1 -> #0:1 (dca -> ac3) Stream #0:2 -> #0:2 (dca -> ac3) Stream #0:3 -> #0:3 (copy) Stream #0:4 -> #0:4 (copy) Input stream #0:2 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 Input stream #0:1 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 frame= 2606 fps=1303 q=-1.0 size= 3kB time=107.36 bitrate= 0.2kbits/s ... frame=96141 fps=813 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s frame=96251 fps=810 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s ... frame=97015 fps=397 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s Getötet ["Killed", in English] I have no idea why this happens, as there is no error-output. I'd like to just copy the subtitles over, not touch them at all. If that won't work, they can be completely dropped.

  Read the article

• How do I convert a video to GIF using ffmpeg, with reasonable quality?

  - by Kamil Hismatullin

  I'm converting .flv movie to .gif file with ffmpeg. ffmpeg -i input.flv -ss 00:00:00.000 -pix_fmt rgb24 -r 10 -s 320x240 -t 00:00:10.000 output.gif It works great, but output gif file has a very law quality. Any ideas how can I improve quality of converted gif? Output of command: $ ffmpeg -i input.flv -ss 00:00:00.000 -pix_fmt rgb24 -r 10 -s 320x240 -t 00:00:10.000 output.gif ffmpeg version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:52:53 with gcc 4.7.2 *** THIS PROGRAM IS DEPRECATED *** This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'input.flv': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: isommp42 creation_time : 2013-02-14 04:00:07 Duration: 00:00:18.85, start: 0.000000, bitrate: 3098 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 1280x720, 2905 kb/s, 25 fps, 25 tbr, 50 tbn, 50 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1(und): Audio: aac, 44100 Hz, stereo, s16, 192 kb/s Metadata: creation_time : 2013-02-14 04:00:07 [buffer @ 0x92a8ea0] w:1280 h:720 pixfmt:yuv420p [scale @ 0x9215100] w:1280 h:720 fmt:yuv420p -> w:320 h:240 fmt:rgb24 flags:0x4 Output #0, gif, to 'output.gif': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: isommp42 creation_time : 2013-02-14 04:00:07 encoder : Lavf53.21.1 Stream #0.0(und): Video: rawvideo, rgb24, 320x240, q=2-31, 200 kb/s, 90k tbn, 10 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream mapping: Stream #0.0 -> #0.0 Press ctrl-c to stop encoding frame= 101 fps= 32 q=0.0 Lsize= 8686kB time=10.10 bitrate=7045.0kbits/s dup=0 drop=149 video:22725kB audio:0kB global headers:0kB muxing overhead -61.778676% Thanks.

  Read the article

• Best video codec to store my own collection

  - by Jack

  Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

  Read the article

• ffmpeg conversion problem

  - by user33126

  installed ffmpeg and it shows version and all correctly. but even info ffmpeg command itself shows ffmpeg -i Alice_In_Wonderland.mp4 gives messgae like FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --extra-cflags=-fPIC --enable-libamr-nb --enable-libamr-wb --enable-libdirac --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-x11grab libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Nov 6 2009 19:11:04, gcc: 4.1.2 20080704 (Red Hat 4.1.2-46) Seems stream 1 codec frame rate differs from container frame rate: 49.93 (9986/200) - 49.92 (599/12) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Alice_In_Wonderland.mp4': Duration: 00:01:39.65, start: 0.000000, bitrate: 542 kb/s Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16 Stream #0.1(und): Video: h264, yuv420p, 480x270, 49.92 tbr, 24.96 tbn, 49.93 tbc At least one output file must be specified Please tell me whats the problem

  Read the article

• ffmpeg conversion problem

  - by Elamurugan

  installed ffmpeg and it shows version and all correctly. but even info ffmpeg command itself shows ffmpeg -i Alice_In_Wonderland.mp4 gives messgae like FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --extra-cflags=-fPIC --enable-libamr-nb --enable-libamr-wb --enable-libdirac --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-x11grab libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Nov 6 2009 19:11:04, gcc: 4.1.2 20080704 (Red Hat 4.1.2-46) Seems stream 1 codec frame rate differs from container frame rate: 49.93 (9986/200) - 49.92 (599/12) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Alice_In_Wonderland.mp4': Duration: 00:01:39.65, start: 0.000000, bitrate: 542 kb/s Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16 Stream #0.1(und): Video: h264, yuv420p, 480x270, 49.92 tbr, 24.96 tbn, 49.93 tbc At least one output file must be specified Please tell me whats the problem

  Read the article

• Would like to change audio codec, but keep video settings with ffmpeg

  - by Craig Tataryn

  I have a video for which I'd like to convert the audio codec to AAC 320 kbps / 44.100 kHz. What would I use for ffmpeg switches such that all the video settings and codec remain the same, but only the audio codec and settings change? Here's my video: $ ffmpeg -i Winnipeg.rb\ Scala-Talk.mov FFmpeg version SVN-r25375, Copyright (c) 2000-2010 the FFmpeg developers built on Oct 6 2010 13:02:41 with gcc 4.2.1 (Apple Inc. build 5664) configuration: --enable-libmp3lame --enable-shared --disable-mmx --arch=x86_64 libavutil 50.32. 2 / 50.32. 2 libavcore 0. 9. 1 / 0. 9. 1 libavcodec 52.92. 0 / 52.92. 0 libavformat 52.80. 0 / 52.80. 0 libavdevice 52. 2. 2 / 52. 2. 2 libavfilter 1.48. 0 / 1.48. 0 libswscale 0.12. 0 / 0.12. 0 Seems stream 0 codec frame rate differs from container frame rate: 2000.00 (2000/1) -> 10.00 (10/1) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Winnipeg.rb Scala-Talk.mov': Metadata: major_brand : qt minor_version : 537199360 compatible_brands: qt Duration: 01:10:53.00, start: 0.000000, bitrate: 283 kb/s Stream #0.0(eng): Video: h264, yuv420p, 800x598, 94 kb/s, 10 fps, 10 tbr, 1k tbn, 2k tbc Stream #0.1(eng): Audio: adpcm_ima_qt, 22050 Hz, 1 channels, s16 Stream #0.2(eng): Audio: adpcm_ima_qt, 22050 Hz, 1 channels, s16 At least one output file must be specified Many thanks in advance! One with with ffmpeg I've never been able to grok is how to just "tweak" files without having to regurgitate every little setting for things you don't want changes.

  Read the article

• Incorrect durations mp4 file created by ffmpeg (avconv)

  - by Ruslan Sharipov

  Example usage: avconv -i rtmp://maps.lo.ufanet.ru/live/10e227922b473e91f37474fa084107af -vcodec copy -an -sn -map 0 -f segment -segment_format mp4 -segment_time 60 -y %05d.mp4 avconv version 0.8.3-6:0.8.3-1+b1, Copyright (c) 2000-2012 the Libav developers built on Jun 15 2012 13:54:35 with gcc 4.7.0 HandShake: client signature does not match! Metadata: height 480.00 remote_addr: sdp_session {sdp_session,0, {sdp_o,"-","1289703354974145","1289703354974145",inet4, "10.1.12.99"}, "Media Presentation", {inet4,"0.0.0.0"}, {0,0}, [{"control","*"},{"range","npt=0.0 start 30400239.52 timeshift_duration 319250.58 timeshift_size 120000.00 width 640.00 [flv @ 0x1d36a40] Estimating duration from bitrate, this may be inaccurate Input #0, flv, from 'rtmp://maps.lo.ufanet.ru/live/10e227922b473e91f37474fa084107af': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0.0: Video: h264 (Baseline), yuvj420p, 640x480 [PAR 1:1 DAR 4:3], 1k tbr, 1k tbn, 2k tbc Output #0, segment, to '%05d.mp4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuvj420p, 640x480 [PAR 1:1 DAR 4:3], q=2-31, 1k tbn, 1k tbc Stream mapping: Stream #0:0 -> #0:0 (copy) Press ctrl-c to stop encoding ^Cframe= 9566 fps= 36 q=-1.0 Lsize= -0kB time=318.25 bitrate= -0.0kbits/s video:30348kB audio:0kB global headers:0kB muxing overhead -100.000071% Received signal 2: terminating. Result: serafim@yard:~/video2$ ls 00000.mp4 00001.mp4 00002.mp4 00003.mp4 00004.mp4 00005.mp4 Now try to play the files in the player, such as VLC. And that's what we get: the first fragment (00000.mp4) played well, no problems, but the second (00001.mp4 and beyond) starts the bug manifests itself, namely the file 00001.mp4 first 60 seconds black screen, but since 61 seconds starts playing the video. Attachments: https://dl.dropbox.com/u/760901/rtmp_and_mp4.zip How to get rid of the delay with black screen at the beginning of the segments? Maybe ffmpeg to pass parameters, or third-party software is able to correct the obtained segments mp4?

  Read the article

• Live Screencast under Linux

  - by OmnipotentEntity

  I was having some difficulty with running a Live Screencast under Linux. I've found jtvlc and tried using that, but whenever I use it the stream comes out either blank or lagged with extremely high latency. I have a fast internet connection and a fast computer, but am I perhaps taxing it too much? Any ideas on what I could possibly be doing wrong? # 1. Get an account on http://www.justin.tv/ # 2. Copy streaming key from: http://www.justin.tv/broadcast/adv_other # 2. Install VLC: http://www.videolan.org/vlc/ # 3. Get Win/Mac/Lin Stream Client: \ # http://apiwiki.justin.tv/mediawiki/index.php/Linux_Broadcasting_API # 4. Adjust the vlc parameters to your liking and run VLC like this #!/bin/bash cvlc screen:// --input-slave=pulse:// \ --screen-width 1920 \ --screen-height 1080 \ --screen-fps 5 \ -v input_stream \ --sout='#duplicate{ dst="transcode{ scale=1, venc=x264{ keyint=60 }, vcodec=h264, vb=600, acodec=mp4a, ab=32, channels=2, samplerate=22050 } :rtp{dst=127.0.0.1,port=1234,sdp=file:///tmp/vlc.sdp} "}' \ --sout-transcode-threads=4 & sleep 2 # 5. Run JTVLC to stream like this: ./jtvlc/jtvlc omnipotententity censored /tmp/vlc.sdp # Notes: #- If you want to see what you're about to stream add 'dst=display, ' # before 'dst="transcode[' # More about the VLC parameters: http://wiki.videolan.org/Documentation:Modules/screen

  Read the article

• Reduce size of MP4

  - by testing

  I have a MP4 file with a lengh of 22:44. Here are the details: Video: width: 720 px height: 404 px data bitrate: 1022 kBit/s overall bitrate: 1182 kBit/s fps: 24 codec: H264 - MPEG4 AVC (part 10) (avc1) Audio: bitrate: 159 kBit/s stereo sample rate: 48 kHz codec: MPEG AAC Audio (mp4a) I thought I can reduce the current filesize (about 200 MB) by reducing the width and the height (420 x 236). I tried different programs: Handbrake, Format Factory, Next Video Converter and Super. The first three didn't worked as expected: Handbrake has a bug by setting the width and the height, the next two doesn't allow the fine setting of the videosize (only presets of width and height). Super seems to be the best, but I didn't found a setting which reduces the file size. I reduced the width and the height but only got 20 MB less. Now I tried the xth setting and I still get a too high file size. I want to reduce the filesize to 100 MB or less. The ouput format should be FLV or MP4, because I need this for flowplayer. Which settings of SUPER or which program should I use to reduce the file size? Of course the video should still be viewable.

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >