Search Results

Search found 20941 results on 838 pages for 'hard drive recovery'.

Page 5/838 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Likelihood of a hard drive PCB replacement working?

  - by Grant Limberg

  I have a 1.5TB Seagate 7200.11 that died. The platter still spins up initially when attached to a machine, but then the drive clicks and spins down. Then the cycle repeats. I've found a few sites that sell replacement PCBs, however I don't know if the PCB is the issue, or something else. Given the symptoms above, is it at all likely that a PCB replacement would help? If not, I won't waste my money on the PCB replacement. Note: I put the drive in an external ESATA controller and tried hooking it up to a Linux box here at work and got some error messages in the logs. I can post them if anyone thinks it will help in determining whether a PCB swap would fix the problem I'm running into.

  Read the article

• Can't Read/Write the Hard disk used in NAS

  - by mgpyone

  I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

  Read the article

• My hard disk does't get recognized

  - by SteveL

  For a few days now I have a problem with my 500GB internal hard disk. I am on Linux Mint 13 but I have the same problem with my Windows installation. When running fdisk -l I can see my hard disk (same on BIOS) but I can't mount it even via the disk utility program. In Windows XP I can see it on the My Computer menu but when I click it, it say's: D:\ is not accessible The file or directory is corrupted and unreadable Is there a way to fix it? Or at least save some of my files and format it? Should I be thinking about the worst-case scenario e.g. my HDD is dead? Edit: The filesystem is NTFS.

  Read the article

• Save GMail attachments directly to Google Drive

  - by Gopinath

  What makes Google Drive attractive is it ability to play nice with other Google offerings like Google Docs, GMail, Android mobiles & tablets. Google Drive is well integrated with Google Docs and every document you create is automatically saved on Google Drive. Google Drive’s integration with other services like GMail may be in progress at Google, but enthusiastic community developers has released a plugin to integrate with GMail. The Google Chrome plugin “Gmail Attachments To Drive” lets you automatically save GMail attachments to Google Drive with a single click. Once the plugin is installed it adds a link “Save To Drive” next to each attachment displayed on GMail and on clicking, it automatically saves the files to Google Drive. I tested the plugin by saving attachments like PDFs, MS Word documents and Images to Google Drive and it worked very well.  I don’t have any complaints on the plugin except couple of feature requests. If the plugin can provide option “Save All Files To Drive” it will be very much helpful to save all attachment of an email at one shot. Also it would be great if the developer can extend it to Firefox too. Anyways it’s a great plugin for Google Drive users and worth checking it out. Install Gmail Attachments To Drive for Google Chrome

  Read the article

• How do I make an external hard drive keep the same drive letter permanently?

  - by andygrunt

  I have a desktop PC (2002 vintage) running Windows XP that I turn on about 2 or 3 times per week. I have a mains powered 250Gb Western Digital hard disk connected to it via USB. I always turn the hard disk on before the PC so it's up and running as the PC boots. When I first connected the external hard disk, the PC assigned it a letter ('i' if it matters) and I've installed software to it, created shortcuts to various files and folders on the disk using that letter. For years everything was fine then I would boot the PC and the hard disk was assigned a different letter. I'd then have to go into 'my computer/manage/disk management' and manually change the letter back to 'i'. If I then rebooted the PC, the hard disk would usually still be 'i' but after the next reboot would be some other random letter and I have to manually change it back to 'i'. This would go on for some time then there'd be periods when the it would always be 'i' then, for no apparent reason (no new devices added, for example), the drive letter would start changing again. At the moment it's in random drive letter mood so I thought I'd ask the following question... How do I assign the external hard disk to be 'i' permanently? Answer: Thanks Molly that seems to have done the trick (after a little fiddling) - slightly disappointed there wasn't a way to do it within Windows without installing something else though. For anyone else trying this, it wasn't completely straightforward so here's what happened with me. I installed USBDLM as per the instructions on its website. I guessed that I had to assign the first USB letter to i so replaced the 'Letter1=' lines to 'Letter=I' in the ini file. To test it, I rebooted the PC only to find it came back up with the display set to 640x480 in 16 colours. After some investigation, I re-installed the display drivers and rebooted and set the display back to its usual setting. The external hard disk now gets set to 'i' but I found I had to re-apply sharing status to it so it was seen from my laptop which is on the same network. The end result of all this is that it now does what I wanted although it does act as though the hard drive has just been plugged in a few seconds after the Windows desktop appears i.e. the little box appears with a progress bar as it searches through the contents of the 'new' hard drive and I eventually get a dialogue box saying 'This disk or device contains more than one type of content. What do you want Windows to do?' and lists options such as play media files, print the pictures or open folder to view the files. This is a tiny pain I wish didn't happen but not exactly a huge price to pay. Other than that - it seems to work fine :) Looks like a spoke too soon... Every time I reboot, I have to re-share the 'i' drive (which I didn't have to do before) so it can be seen by my laptop on the same network. Any ideas how to make that permanent?

  Read the article

• External usb 3.0 hard drive is not recognised when plugged into usb 3 port (ubuntu natty 64 bit).

  - by kimangroo

  I have an Iomega Prestige Portable External Hard Drive 1TB USB 3.0. It works fine on windows 7 as a usb 3.0 drive. It isn't detected on ubuntu natty 64bit, 2.6.38-8-generic. fdisk -l cannot see it at all: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1bed746b Device Boot Start End Blocks Id System /dev/sda1 1 1689 13560832 27 Unknown /dev/sda2 * 1689 1702 102400 7 HPFS/NTFS /dev/sda3 1702 19978 146805760 7 HPFS/NTFS /dev/sda4 19978 60802 327914497 5 Extended /dev/sda5 25555 60802 283120640 7 HPFS/NTFS /dev/sda6 19978 23909 31571968 83 Linux /dev/sda7 23909 25555 13218816 82 Linux swap / Solaris Partition table entries are not in disk order lsusb can see it: Bus 003 Device 003: ID 059b:0070 Iomega Corp. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 05fe:0011 Chic Technology Corp. Browser Mouse Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 0489:e00f Foxconn / Hon Hai Bus 001 Device 004: ID 0c45:64b5 Microdia Bus 001 Device 003: ID 08ff:168f AuthenTec, Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub And dmesg | grep -i xhci (I may have unplugged the drive and plugged it back in again after booting): [ 1.659060] pci 0000:04:00.0: xHCI HW did not halt within 2000 usec status = 0x0 [ 11.484971] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.484997] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 11.485002] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 11.485064] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 11.636149] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 [ 11.636241] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 11.636246] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 11.636251] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 11.636256] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 11.636261] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 11.639654] xHCI xhci_add_endpoint called for root hub [ 11.639655] xHCI xhci_check_bandwidth called for root hub [ 11.956366] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 2 [ 12.001073] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.007059] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.012932] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.018922] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.049139] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.056754] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.131607] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 12.179717] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.686876] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 12.687058] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 12.687152] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 43.330737] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 2 [ 43.422579] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 43.422658] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af00 [ 43.422665] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af40 [ 43.422671] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af80 [ 43.422677] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669afc0 [ 43.531159] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 125.160248] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.766466] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 3 [ 903.807789] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.813530] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.819400] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.825104] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.855067] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862314] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862597] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.913211] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 904.424416] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 904.424599] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 904.424700] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 935.139021] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 3 [ 935.226075] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 935.226140] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b00 [ 935.226148] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b40 [ 935.226153] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b80 [ 935.226159] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186bc0 [ 935.343339] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst I thought it might be that the firmware wasn't compatible with linux or something, but when booting a live image of partedmagic, (2.6.38.4-pmagic), the drive was detected fine, I could mount it and got usb 3.0 speeds (at least they double the speeds I got from plugging same drive in usb 2 ports). dmesg in partedmagic did say something about no SuperSpeed endpoint which was an error I saw in a previous dmesg of ubuntu: Jun 27 15:49:02 (none) user.info kernel: [ 2.978743] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jun 27 15:49:02 (none) user.debug kernel: [ 2.978771] xhci_hcd 0000:04:00.0: setting latency timer to 64 Jun 27 15:49:02 (none) user.info kernel: [ 2.978781] xhci_hcd 0000:04:00.0: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 2.978856] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 Jun 27 15:49:02 (none) user.info kernel: [ 3.089458] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 Jun 27 15:49:02 (none) user.debug kernel: [ 3.089541] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089544] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089546] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089548] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089550] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X Jun 27 15:49:02 (none) user.warn kernel: [ 3.092857] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values Jun 27 15:49:02 (none) user.info kernel: [ 3.092864] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 Jun 27 15:49:02 (none) user.info kernel: [ 3.092866] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 27 15:49:02 (none) user.info kernel: [ 3.092867] usb usb3: Product: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 3.092869] usb usb3: Manufacturer: Linux 2.6.38.4-pmagic xhci_hcd Jun 27 15:49:02 (none) user.info kernel: [ 3.092870] usb usb3: SerialNumber: 0000:04:00.0 Jun 27 15:49:02 (none) user.debug kernel: [ 3.092961] xHCI xhci_add_endpoint called for root hub Jun 27 15:49:02 (none) user.debug kernel: [ 3.092963] xHCI xhci_check_bandwidth called for root hub Well I have no idea what's going wrong, and I haven't had much luck from google and the forums so far. A number of unanswered threads with people with similar error messages and problems only. Hopefully someone here can help or point me in the right direction?!

  Read the article

• How to create a recovery partition in memory

  - by Luis Alvarado

  How can I create a recovery partition in memory as an option when booting the PC so that I can check all partitions including the system one that typically loads Ubuntu. This way I can fsck for example the partition that is normally running Ubuntu but without having it running it at that moment. The recovery partition would have access to some tools to check the disck, memory, etc. Is this doable?

  Read the article

• Windows 7 keeps losing drive letters

  - by Dean Perry

  Windows 7 loses its drive letters and I have to keep manually assigning a drive letter everytime I plug in a hard drive, whether it's internal or external. The only way to get around it is to reinstall Windows 7 but the problem will come back after a few months. We are a PC repair company and plug in many drives during the say and it can be very frustrating having to keep assigning a drive letter every time a drive is plugged in. Windows Updates are turned off so it can't be that. Any reason why this would have happened?

  Read the article

• Drive stopped working on windows server 2003 and I receive a "controller error"

  - by Durden81

  I can access the server in safe mode. I have a Proliant 360 Hp server with Windows server 2003 R2. The event viewer is completely filled up with this error: the driver detected a controller error on Device\Harddisk3\DR3 I individuated the drive affected. It is drive H that is a secondary non mirrored drive. When I access anything on that drive I receive: "the request could not be performed because of an I/O device error" What should I do? Is this just a driver issue or a hard drive failure? Please give me a quick help as my websites are offline due to this. Any suggestion is welcome!

  Read the article

• Autoplay for USB drive keeps popping up

  - by Adam Haile

  I have a Seagate external 2TB USB drive that when I leave it plugged in, the Autoplay dialog asking what to do with the drive pops up about once every 30-60 minutes. No matter how many times I tell it to go away, it keeps coming back. I have tried multiple power supplies, USB cables, and all the USB ports on my machine...but it keeps doing the same thing. Also, this does not happen with the same drive on a different computer. Could this be some power or configuration setting that is causing this? I'm running Windows 7 x64 (the computer it works on is x86)

  Read the article

• Force spin-down of external hard-drive on linux (raspberry pi)

  - by user258346

  I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

  Read the article

• Recovering a word file (Select the encoding that makes your document readable)

  - by HOY

  My girlfriend requested me to recover a word file which is her 2 months of work :(, and this is her thesis for graduation. It shows the "Select the encoding that makes your document readable" screen when I tried to open it, I tried 2 recovery tools but didn't work. File can be downloaded from the below link. http://s3.dosya.tc/server3/bmu4bi/glava.doc.html I kindly request your help. *The history of the issue*** she said she was copy pasting from other files while creating this file(she copy pasted from a pdf too). 2 days ago she opened the file in company pc and worked on it. Wrote 2 pages and saved. Next morning she could not open it. it is possible that an error occured when saving. the computer she worked freezes sometimes , when she was working there was a file in usb she plug out and in it and continue to work. then saved.

  Read the article

• Using an ATA-100 Hard Drive with a Thermaltake BlacX External Hard Drive Dock

  - by Joe

  Is it possible for a Thermaltake BlacX HDD Dock to connect to and recognize an ATA-100 Hard Drive? I know that the specifications for the BlacX say that it only supports SATA & SATAII, but I was hoping for one of three things: 1) for it to still work even though it isn't supported 2) for there to be some sort of workaround to make this possible 3) for there to be another part of some sort that I could purchase to make this work

  Read the article

• Does vertical position affect hard drive?

  - by yoosiba

  Hey. Recently I noticed that for many small PC cases hard drives are installed in vertical position while in midi tower and all bigger they are in horizontal position. What impact on hdd (non SSD, just plain hdd with all mechanical parts inside) has vertical position/ Does it decrease life of hdd? Is it more prone to data errors?

  Read the article

• SATA Hard drive not detecting

  - by Srin

  I have a dead laptop, Trying to recover data from the Hard drive (Sata2) I tried putting the HD in one similar laptop , it's not recognized I got USB-SATA Adapter and plugged the HD , and still the HD is not recognized can you tell me is there any other possible way to get my data back ?

  Read the article

• Dual boot Ubuntu and Windows 7, I Can only boot ubuntu through recovery mode

  - by Alec

  I want to become a new user of Ubuntu, however this problem is preventing me. I have/had Window 7 professional on my computer. I recently looked into getting linux. I discovered dual-booting and decided to give it a try. First I created a bootable flash drive with ubuntu 12.10 64 bit. I then followed the instructions on: https://help.ubuntu.com/community/WindowsDualBoot after I finished going through the setup, my computer rebooted. After the reboot I was able to select Ubuntu, advanced options for Ubuntu, 2 memory tests, and windows 7 (loader). So I chose Windows ( honestly i was more concerned that i still had everything on windows at this point). I then rebooted again and selected Ubuntu. When i selected Ubuntu, the background screen of Grub (the crimson/burgandy color) stayed for a few seconds then the screen went black: video here http://www.youtube.com/watch?v=6kKcG4sT7Lg&feature=plcp I tried again with the same results. so i redid the ubuntu install differently using http://www.liberiangeek.net/2012/10/dual-booting-windows-7-and-ubuntu-12-10-quantal-quetzal/. After rebooting the same thing happened. After that i was stumped, so i figured it could hurt to experiment. after all i backed up my windows 7 stuff, and i have the software disk. I tried booting in recovery mode under "advanced options for Ubuntu" and sure enough, after selecting continue to normal reboot it worked. So i updated and everything but when i rebooted it still wouldn't boot under Ubuntu. It would always boot after recovery mode. So i try installing 12.10 32 bit Ubuntu. the same problem keeps happening. I can still get to Ubuntu through recovery mode. so i went online and tried using the terminal (in ubuntu that i booted through recovery mode) when i was using it i discovered that "Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected" kept showing up. also i noticed a notification in the top right corner that looked like a do not enter sign. it said "an error occured, please run package manager from the right-click menu or apt-get in a terminal to see what is wrong. the error message was: 'ror in sitecustomize;set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected traceback (most recent called last): File "/usr/bin/lsb_release EOFError: EOF read where not expected 39;0' this usually means that your installed packages have unmet dependencies" Naturally i assumed this was what was causing my boot problems. I downloaded synaptic and updated everything and the error went away. but my boot problem was still a problem. so i go online find some things that have worked for others, like this Try to do this (in your terminal: sudo nano /etc/default/grub Look for: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Change it too : GRUB_CMDLINE_LINUX_DEFAULT="quiet" And update Grub: sudo update-grub This should fix stuff.) I did this and i still have the problem. sorry for the excessive explanation, please help.

  Read the article

• How can I recover XFS partitions from a formatted HD?

  - by giuprivite

  I deleted the partition table of my HD. I wanted to format another one, but by mistake, I formatted the wrong one. Then I also created some new partition on it. Now I would like, if possible, to recover my old data. The old configuration was this: A primary NTFS partition with Windows, and a secondary partition with four logical partitions: a swap and three XFS partitions (two for Ubuntu and OpenSuSE, and one with the home for both systems). This is the output I get when I run gpart in a terminal: ubuntu@ubuntu:~$ sudo gpart /dev/sdb Begin scan... Possible partition(Windows NT/W2K FS), size(39997mb), offset(0mb) Possible extended partition at offset(39997mb) Possible partition(Linux swap), size(8189mb), offset(39997mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(48187mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(89149mb) Possible partition(SGI XFS filesystem), size(175044mb), offset(130112mb) End scan. Checking partitions... Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary Partition(Linux swap or Solaris/x86): logical Partition(Linux ext2 filesystem): logical Partition(Linux ext2 filesystem): orphaned logical Partition(Linux ext2 filesystem): orphaned logical Ok. Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 39997mb #s(81915360) s(63-81915422) chs: (0/1/1)-(1023/254/63)d (0/1/1)-(5098/254/51)r Primary partition(2) type: 015(0x0F)(Extended DOS, LBA) size: 265245mb #s(543221849) s(81915435-625137283) chs: (1023/254/63)-(1023/254/63)d (5099/0/1)-(38912/254/2)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Looking the first eight lines, it seems the data are still there... but I don't know how to recover them. I have a free second HD of about 500 GB (the formatted one is 320 GB) that I can use for the recovery process.

  Read the article

• How can I recover XFS partitions from a formatted HD?

  - by giuprivite

  I deleted the partition table of my HD. I wanted to format another one, but by mistake, I formatted the wrong one. Then I also created some new partition on it. Now I would like, if possible, to recover my old data. The old configuration was this: A primary NTFS partition with Windows, and a secondary partition with four logical partitions: a swap and three XFS partitions (two for Ubuntu and OpenSuSE, and one with the home for both systems). This is the output I get when I run gpart in a terminal: ubuntu@ubuntu:~$ sudo gpart /dev/sdb Begin scan... Possible partition(Windows NT/W2K FS), size(39997mb), offset(0mb) Possible extended partition at offset(39997mb) Possible partition(Linux swap), size(8189mb), offset(39997mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(48187mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(89149mb) Possible partition(SGI XFS filesystem), size(175044mb), offset(130112mb) End scan. Checking partitions... Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary Partition(Linux swap or Solaris/x86): logical Partition(Linux ext2 filesystem): logical Partition(Linux ext2 filesystem): orphaned logical Partition(Linux ext2 filesystem): orphaned logical Ok. Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 39997mb #s(81915360) s(63-81915422) chs: (0/1/1)-(1023/254/63)d (0/1/1)-(5098/254/51)r Primary partition(2) type: 015(0x0F)(Extended DOS, LBA) size: 265245mb #s(543221849) s(81915435-625137283) chs: (1023/254/63)-(1023/254/63)d (5099/0/1)-(38912/254/2)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Looking the first eight lines, it seems the data are still there... but I don't know how to recover them. I have a free second HD of about 500 GB (the formatted one is 320 GB) that I can use for the recovery process.

  Read the article

• Create folder and insert file in Google Drive

  - by web_student

  I am trying to create a new folder in Drive and upload one (or more) files to that created folder. I use the code below, but the result is that both the folder and the file are placed in the root of my Drive. $client->setAccessToken($_SESSION['accessToken']); //create folder $folder_mime = "application/vnd.google-apps.folder"; $folder_name = 'New Folder'; $service = new Google_DriveService($client); $folder = new Google_DriveFile(); $folder->setTitle($folder_name); $folder->setMimeType($folder_mime); $service->files->insert($folder); //upload file $file_name = $_FILES["uploadFile"]["name"]; $file_mime = $_FILES["uploadFile"]["type"]; $file_path = $_FILES["uploadFile"]["tmp_name"]; $service = new Google_DriveService($client); $file = new Google_DriveFile(); $file->setParents(array($folder_name)); $file->setTitle($file_name); $file->setDescription('This is a '.$file_mime.' document'); $file->setMimeType($file_mime); $service->files->insert( $file, array( 'data' => file_get_contents($file_path) ) );

  Read the article

• Hard Drive that was used before not detected or accessible in Windows 7

  - by Anders

  Hello SU: My PC crashed for some unknown reason, and I am still working on what caused that. However, I pulled my main (windows) drive from my computer and hooked it up to my roommate's machine and was able to pull the data I needed off of it (i.e. the drive is good). I hook up his drives as they were, I had to turn off his machine and unplug his secondary drive to hook mine up, boot his machine and there is no second drive available in windows explorer. I opened Device Manager to see if for some reason it's drive letter got un-assigned, but there is nothing listed in there except his primary hard drive, his optical drive and one other optical drive which I believe is the virtual drive Daemon Tools made. The drive shows up in the BIOS, however after I restarted his machine again it sits on the "Entering setup....." screen at the load window. The only thing I can think of is that may have messed with stuff is I used this tutorial to create a bootable XP install on a USB drive to install XP on my machine (I am 99% certain that the optical drive in my PC is broken) and maybe it used the other hard drive's letter for the USB drive for some reason, which doesn't make much sense since it was recognized it as a different drive letter before I started the process. It is possible that it used the secondary hard drive's letter for it's work, but once again I am uncertain. Where should I go from here? He his bound to wake up within the next several hours and will probably flip a lid if I cannot get some sort of handle on this. Any and all help is greatly appreciated. PS: Anyone who helps me get this situated has a beer or two on me, as long as you are in the greater metro Detroit area, or don't mind traveling a bit!

  Read the article

• Ways to recover data from external hard drive

  - by Howard Benson

  I use an external hard disk for backup of my mac with time machine (OS 10.5.8). I have made something wrong and I have found important folders in the recycler bin. These folders come from external hd. They are backup folders (backups.backupdb) and others. I have tried to restore them draggin and dropping. Some of them came back in the external hd in a while. For the others it takes hours to "preparing to copy" and then it has said "there's no space to copy" on ext hd. It's strange. Files are now in the recycle bin (180gb), and the ext had should have lot of free space. But it isn't really so. Ext hd is not free of space even if these files are in the bin. I ask for advices. I'm not also able to use time machine now (and i have "lost" old backups) for the same reason. Ext hd says that it has not free space.. Thanks

  Read the article

• How do I access a hard drive from a computer where windows is deleted?

  - by Intredasting

  Here is the current situation: My cousin deleted Windows from his hard drive (yeah, don't ask...). His hard drive still has about 200 GB of files on it that he may want to recover before we format the hard drive and reinstall Windows 7 to it. Is there a way I can create a bootable CD from some utility that will allow me to access the files on the hard drive, and copy it to a flash drive? What's the best utility for that?

  Read the article

• Checksum Errors From Hard Disk

  - by Ademos

  After running GSmartControl, I received three checksum errors on my storage hard disk. Error in Attribute Data structure: checksum error Error in Attribute Thresholds structure: checksum error Error in ATA Error Log structure: checksum error Does this indicate a hard disk failure? Because, this is the THIRD TIME I have replaced the same hard disk. (after seeing this error) The hard disk is a Western Digital Caviar Green. (2 TB)

  Read the article

• How to recover a USB flash drive

  - by Steve Rowe

  I have a USB flash drive that claims it needs to be formatted every time I put it into my computer (Windows). Yesterday the drive was healthy and had data on it. The data is probalby still there. Are there any free tools to restore the drive? If not free, what tools are known to work in this situation?

  Read the article

• 2 Hard Drives.One Partition

  - by Nick

  I have two hard drives (One 500 GB and the other 750 GB). I would like to create a single partition which will include these 2 hard drives. I guess it works only with identical hard drives, correct me if I am wrong. I have these 2 drives at an old computer which I tuned and may turn it into a web server,so I'm going to install ubuntu on them. How can I make 2 or more hard drives behave as one in one partition?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >