Search Results

Search found 1907 results on 77 pages for 'james weng'.

Page 5/77 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • C#/.NET Little Wonders: The ConcurrentDictionary

    - by James Michael Hare
    Once again we consider some of the lesser known classes and keywords of C#.  In this series of posts, we will discuss how the concurrent collections have been developed to help alleviate these multi-threading concerns.  Last week’s post began with a general introduction and discussed the ConcurrentStack<T> and ConcurrentQueue<T>.  Today's post discusses the ConcurrentDictionary<T> (originally I had intended to discuss ConcurrentBag this week as well, but ConcurrentDictionary had enough information to create a very full post on its own!).  Finally next week, we shall close with a discussion of the ConcurrentBag<T> and BlockingCollection<T>. For more of the "Little Wonders" posts, see the index here. Recap As you'll recall from the previous post, the original collections were object-based containers that accomplished synchronization through a Synchronized member.  While these were convenient because you didn't have to worry about writing your own synchronization logic, they were a bit too finely grained and if you needed to perform multiple operations under one lock, the automatic synchronization didn't buy much. With the advent of .NET 2.0, the original collections were succeeded by the generic collections which are fully type-safe, but eschew automatic synchronization.  This cuts both ways in that you have a lot more control as a developer over when and how fine-grained you want to synchronize, but on the other hand if you just want simple synchronization it creates more work. With .NET 4.0, we get the best of both worlds in generic collections.  A new breed of collections was born called the concurrent collections in the System.Collections.Concurrent namespace.  These amazing collections are fine-tuned to have best overall performance for situations requiring concurrent access.  They are not meant to replace the generic collections, but to simply be an alternative to creating your own locking mechanisms. Among those concurrent collections were the ConcurrentStack<T> and ConcurrentQueue<T> which provide classic LIFO and FIFO collections with a concurrent twist.  As we saw, some of the traditional methods that required calls to be made in a certain order (like checking for not IsEmpty before calling Pop()) were replaced in favor of an umbrella operation that combined both under one lock (like TryPop()). Now, let's take a look at the next in our series of concurrent collections!For some excellent information on the performance of the concurrent collections and how they perform compared to a traditional brute-force locking strategy, see this wonderful whitepaper by the Microsoft Parallel Computing Platform team here. ConcurrentDictionary – the fully thread-safe dictionary The ConcurrentDictionary<TKey,TValue> is the thread-safe counterpart to the generic Dictionary<TKey, TValue> collection.  Obviously, both are designed for quick – O(1) – lookups of data based on a key.  If you think of algorithms where you need lightning fast lookups of data and don’t care whether the data is maintained in any particular ordering or not, the unsorted dictionaries are generally the best way to go. Note: as a side note, there are sorted implementations of IDictionary, namely SortedDictionary and SortedList which are stored as an ordered tree and a ordered list respectively.  While these are not as fast as the non-sorted dictionaries – they are O(log2 n) – they are a great combination of both speed and ordering -- and still greatly outperform a linear search. Now, once again keep in mind that if all you need to do is load a collection once and then allow multi-threaded reading you do not need any locking.  Examples of this tend to be situations where you load a lookup or translation table once at program start, then keep it in memory for read-only reference.  In such cases locking is completely non-productive. However, most of the time when we need a concurrent dictionary we are interleaving both reads and updates.  This is where the ConcurrentDictionary really shines!  It achieves its thread-safety with no common lock to improve efficiency.  It actually uses a series of locks to provide concurrent updates, and has lockless reads!  This means that the ConcurrentDictionary gets even more efficient the higher the ratio of reads-to-writes you have. ConcurrentDictionary and Dictionary differences For the most part, the ConcurrentDictionary<TKey,TValue> behaves like it’s Dictionary<TKey,TValue> counterpart with a few differences.  Some notable examples of which are: Add() does not exist in the concurrent dictionary. This means you must use TryAdd(), AddOrUpdate(), or GetOrAdd().  It also means that you can’t use a collection initializer with the concurrent dictionary. TryAdd() replaced Add() to attempt atomic, safe adds. Because Add() only succeeds if the item doesn’t already exist, we need an atomic operation to check if the item exists, and if not add it while still under an atomic lock. TryUpdate() was added to attempt atomic, safe updates. If we want to update an item, we must make sure it exists first and that the original value is what we expected it to be.  If all these are true, we can update the item under one atomic step. TryRemove() was added to attempt atomic, safe removes. To safely attempt to remove a value we need to see if the key exists first, this checks for existence and removes under an atomic lock. AddOrUpdate() was added to attempt an thread-safe “upsert”. There are many times where you want to insert into a dictionary if the key doesn’t exist, or update the value if it does.  This allows you to make a thread-safe add-or-update. GetOrAdd() was added to attempt an thread-safe query/insert. Sometimes, you want to query for whether an item exists in the cache, and if it doesn’t insert a starting value for it.  This allows you to get the value if it exists and insert if not. Count, Keys, Values properties take a snapshot of the dictionary. Accessing these properties may interfere with add and update performance and should be used with caution. ToArray() returns a static snapshot of the dictionary. That is, the dictionary is locked, and then copied to an array as a O(n) operation.  GetEnumerator() is thread-safe and efficient, but allows dirty reads. Because reads require no locking, you can safely iterate over the contents of the dictionary.  The only downside is that, depending on timing, you may get dirty reads. Dirty reads during iteration The last point on GetEnumerator() bears some explanation.  Picture a scenario in which you call GetEnumerator() (or iterate using a foreach, etc.) and then, during that iteration the dictionary gets updated.  This may not sound like a big deal, but it can lead to inconsistent results if used incorrectly.  The problem is that items you already iterated over that are updated a split second after don’t show the update, but items that you iterate over that were updated a split second before do show the update.  Thus you may get a combination of items that are “stale” because you iterated before the update, and “fresh” because they were updated after GetEnumerator() but before the iteration reached them. Let’s illustrate with an example, let’s say you load up a concurrent dictionary like this: 1: // load up a dictionary. 2: var dictionary = new ConcurrentDictionary<string, int>(); 3:  4: dictionary["A"] = 1; 5: dictionary["B"] = 2; 6: dictionary["C"] = 3; 7: dictionary["D"] = 4; 8: dictionary["E"] = 5; 9: dictionary["F"] = 6; Then you have one task (using the wonderful TPL!) to iterate using dirty reads: 1: // attempt iteration in a separate thread 2: var iterationTask = new Task(() => 3: { 4: // iterates using a dirty read 5: foreach (var pair in dictionary) 6: { 7: Console.WriteLine(pair.Key + ":" + pair.Value); 8: } 9: }); And one task to attempt updates in a separate thread (probably): 1: // attempt updates in a separate thread 2: var updateTask = new Task(() => 3: { 4: // iterates, and updates the value by one 5: foreach (var pair in dictionary) 6: { 7: dictionary[pair.Key] = pair.Value + 1; 8: } 9: }); Now that we’ve done this, we can fire up both tasks and wait for them to complete: 1: // start both tasks 2: updateTask.Start(); 3: iterationTask.Start(); 4:  5: // wait for both to complete. 6: Task.WaitAll(updateTask, iterationTask); Now, if I you didn’t know about the dirty reads, you may have expected to see the iteration before the updates (such as A:1, B:2, C:3, D:4, E:5, F:6).  However, because the reads are dirty, we will quite possibly get a combination of some updated, some original.  My own run netted this result: 1: F:6 2: E:6 3: D:5 4: C:4 5: B:3 6: A:2 Note that, of course, iteration is not in order because ConcurrentDictionary, like Dictionary, is unordered.  Also note that both E and F show the value 6.  This is because the output task reached F before the update, but the updates for the rest of the items occurred before their output (probably because console output is very slow, comparatively). If we want to always guarantee that we will get a consistent snapshot to iterate over (that is, at the point we ask for it we see precisely what is in the dictionary and no subsequent updates during iteration), we should iterate over a call to ToArray() instead: 1: // attempt iteration in a separate thread 2: var iterationTask = new Task(() => 3: { 4: // iterates using a dirty read 5: foreach (var pair in dictionary.ToArray()) 6: { 7: Console.WriteLine(pair.Key + ":" + pair.Value); 8: } 9: }); The atomic Try…() methods As you can imagine TryAdd() and TryRemove() have few surprises.  Both first check the existence of the item to determine if it can be added or removed based on whether or not the key currently exists in the dictionary: 1: // try add attempts an add and returns false if it already exists 2: if (dictionary.TryAdd("G", 7)) 3: Console.WriteLine("G did not exist, now inserted with 7"); 4: else 5: Console.WriteLine("G already existed, insert failed."); TryRemove() also has the virtue of returning the value portion of the removed entry matching the given key: 1: // attempt to remove the value, if it exists it is removed and the original is returned 2: int removedValue; 3: if (dictionary.TryRemove("C", out removedValue)) 4: Console.WriteLine("Removed C and its value was " + removedValue); 5: else 6: Console.WriteLine("C did not exist, remove failed."); Now TryUpdate() is an interesting creature.  You might think from it’s name that TryUpdate() first checks for an item’s existence, and then updates if the item exists, otherwise it returns false.  Well, note quite... It turns out when you call TryUpdate() on a concurrent dictionary, you pass it not only the new value you want it to have, but also the value you expected it to have before the update.  If the item exists in the dictionary, and it has the value you expected, it will update it to the new value atomically and return true.  If the item is not in the dictionary or does not have the value you expected, it is not modified and false is returned. 1: // attempt to update the value, if it exists and if it has the expected original value 2: if (dictionary.TryUpdate("G", 42, 7)) 3: Console.WriteLine("G existed and was 7, now it's 42."); 4: else 5: Console.WriteLine("G either didn't exist, or wasn't 7."); The composite Add methods The ConcurrentDictionary also has composite add methods that can be used to perform updates and gets, with an add if the item is not existing at the time of the update or get. The first of these, AddOrUpdate(), allows you to add a new item to the dictionary if it doesn’t exist, or update the existing item if it does.  For example, let’s say you are creating a dictionary of counts of stock ticker symbols you’ve subscribed to from a market data feed: 1: public sealed class SubscriptionManager 2: { 3: private readonly ConcurrentDictionary<string, int> _subscriptions = new ConcurrentDictionary<string, int>(); 4:  5: // adds a new subscription, or increments the count of the existing one. 6: public void AddSubscription(string tickerKey) 7: { 8: // add a new subscription with count of 1, or update existing count by 1 if exists 9: var resultCount = _subscriptions.AddOrUpdate(tickerKey, 1, (symbol, count) => count + 1); 10:  11: // now check the result to see if we just incremented the count, or inserted first count 12: if (resultCount == 1) 13: { 14: // subscribe to symbol... 15: } 16: } 17: } Notice the update value factory Func delegate.  If the key does not exist in the dictionary, the add value is used (in this case 1 representing the first subscription for this symbol), but if the key already exists, it passes the key and current value to the update delegate which computes the new value to be stored in the dictionary.  The return result of this operation is the value used (in our case: 1 if added, existing value + 1 if updated). Likewise, the GetOrAdd() allows you to attempt to retrieve a value from the dictionary, and if the value does not currently exist in the dictionary it will insert a value.  This can be handy in cases where perhaps you wish to cache data, and thus you would query the cache to see if the item exists, and if it doesn’t you would put the item into the cache for the first time: 1: public sealed class PriceCache 2: { 3: private readonly ConcurrentDictionary<string, double> _cache = new ConcurrentDictionary<string, double>(); 4:  5: // adds a new subscription, or increments the count of the existing one. 6: public double QueryPrice(string tickerKey) 7: { 8: // check for the price in the cache, if it doesn't exist it will call the delegate to create value. 9: return _cache.GetOrAdd(tickerKey, symbol => GetCurrentPrice(symbol)); 10: } 11:  12: private double GetCurrentPrice(string tickerKey) 13: { 14: // do code to calculate actual true price. 15: } 16: } There are other variations of these two methods which vary whether a value is provided or a factory delegate, but otherwise they work much the same. Oddities with the composite Add methods The AddOrUpdate() and GetOrAdd() methods are totally thread-safe, on this you may rely, but they are not atomic.  It is important to note that the methods that use delegates execute those delegates outside of the lock.  This was done intentionally so that a user delegate (of which the ConcurrentDictionary has no control of course) does not take too long and lock out other threads. This is not necessarily an issue, per se, but it is something you must consider in your design.  The main thing to consider is that your delegate may get called to generate an item, but that item may not be the one returned!  Consider this scenario: A calls GetOrAdd and sees that the key does not currently exist, so it calls the delegate.  Now thread B also calls GetOrAdd and also sees that the key does not currently exist, and for whatever reason in this race condition it’s delegate completes first and it adds its new value to the dictionary.  Now A is done and goes to get the lock, and now sees that the item now exists.  In this case even though it called the delegate to create the item, it will pitch it because an item arrived between the time it attempted to create one and it attempted to add it. Let’s illustrate, assume this totally contrived example program which has a dictionary of char to int.  And in this dictionary we want to store a char and it’s ordinal (that is, A = 1, B = 2, etc).  So for our value generator, we will simply increment the previous value in a thread-safe way (perhaps using Interlocked): 1: public static class Program 2: { 3: private static int _nextNumber = 0; 4:  5: // the holder of the char to ordinal 6: private static ConcurrentDictionary<char, int> _dictionary 7: = new ConcurrentDictionary<char, int>(); 8:  9: // get the next id value 10: public static int NextId 11: { 12: get { return Interlocked.Increment(ref _nextNumber); } 13: } Then, we add a method that will perform our insert: 1: public static void Inserter() 2: { 3: for (int i = 0; i < 26; i++) 4: { 5: _dictionary.GetOrAdd((char)('A' + i), key => NextId); 6: } 7: } Finally, we run our test by starting two tasks to do this work and get the results… 1: public static void Main() 2: { 3: // 3 tasks attempting to get/insert 4: var tasks = new List<Task> 5: { 6: new Task(Inserter), 7: new Task(Inserter) 8: }; 9:  10: tasks.ForEach(t => t.Start()); 11: Task.WaitAll(tasks.ToArray()); 12:  13: foreach (var pair in _dictionary.OrderBy(p => p.Key)) 14: { 15: Console.WriteLine(pair.Key + ":" + pair.Value); 16: } 17: } If you run this with only one task, you get the expected A:1, B:2, ..., Z:26.  But running this in parallel you will get something a bit more complex.  My run netted these results: 1: A:1 2: B:3 3: C:4 4: D:5 5: E:6 6: F:7 7: G:8 8: H:9 9: I:10 10: J:11 11: K:12 12: L:13 13: M:14 14: N:15 15: O:16 16: P:17 17: Q:18 18: R:19 19: S:20 20: T:21 21: U:22 22: V:23 23: W:24 24: X:25 25: Y:26 26: Z:27 Notice that B is 3?  This is most likely because both threads attempted to call GetOrAdd() at roughly the same time and both saw that B did not exist, thus they both called the generator and one thread got back 2 and the other got back 3.  However, only one of those threads can get the lock at a time for the actual insert, and thus the one that generated the 3 won and the 3 was inserted and the 2 got discarded.  This is why on these methods your factory delegates should be careful not to have any logic that would be unsafe if the value they generate will be pitched in favor of another item generated at roughly the same time.  As such, it is probably a good idea to keep those generators as stateless as possible. Summary The ConcurrentDictionary is a very efficient and thread-safe version of the Dictionary generic collection.  It has all the benefits of type-safety that it’s generic collection counterpart does, and in addition is extremely efficient especially when there are more reads than writes concurrently. Tweet Technorati Tags: C#, .NET, Concurrent Collections, Collections, Little Wonders, Black Rabbit Coder,James Michael Hare

    Read the article

  • Help with split

    - by Andeeh
    I have something that splits each line of a file. here is a sample of a line it might split "James","Project5","15/05/2010","3" I have this code Private Sub Command1_Click() Open jobs For Input As #1 Do While Not EOF(1) Line Input #1, tmpstring splititems = Split(tmpstring, ",") Form1.Print splititems(0) Form1.Print splititems(1); Form1.Print splititems(2); Form1.Print splititems(3) Loop Close #1 End Sub I would like it to instead of outputting a name each time there is a name, just put the project under the name that is already there. e.g. if there was another line in the file with the name james and he had been working on project 2 in that line I would like it to just put project 2 under the "James" that had already been put on the form. Any help would be fantastic

    Read the article

  • Getting mysql row that doesn't conflict with another row

    - by user939951
    I have two tables that link together through an id one is "submit_moderate" and one is "submit_post" The "submit_moderate" table looks like this id moderated_by post 1 James 60 2 Alice 32 3 Tim 18 4 Michael 60 Im using a simple query to get data from the "submit_post" table according to the "submit_moderate" table. $get_posts = mysql_query("SELECT * FROM submit_moderate WHERE moderated_by!='$user'"); $user is the person who is signed in. Now my problem is when I run this query, with the user 'Michael' it will retrieve this 1 James 60 2 Alice 32 3 Tim 18 Now technically this is correct however I don't want to retrieve the first row because 60 is associated with Michael as well as James. Basically I don't want to retrieve that value '60'. I know why this is happening however I can't figure out how to do this. I appreciate any hints or advice I can get.

    Read the article

  • SVNParentPath directory authorization

    - by James
    The question is a bit stupid but I can't get it sorted. I have a server with SVN that uses the SVNPath directive in httpd.conf and all works fine with path authorizations. Now I'm installing a second serer where I'm going to use SVNParentPath directive and I've got it all running except I can't get the authorization part quite right. From what I understand it's the same as when you use SVNPath but you need to specificy the repo name before the folder name.. My SVNParentPath is /srv/svn/ and I created a directory /srv/svn/testproj and then ran svnadmin create /srv/svn/testproj Now i'm configuring my authorization file: [/] * = svnadmin = rw adusgi = rw [testproj:/svn/testproj] demada = rw degari = rw scarja = rw Now if I try to commit /svn/testproj using user svnadmin or adusgi all is fine. If I try for example demada it doesn't work... (I've run the htpasswd2 commands for the user obviously. The directory is correct or atleast thats how I use the directory with the SVNPath server thats already running, the part I think I'm getting wrong is the repo name, I just used the directory name but what am I really supposed to put there?? Thank you, James

    Read the article

  • How to install a desktop environment onto Ubuntu Server -- but without internet access or a CDROM?

    - by James
    I am playing around with a computer which has no CDROM drive or internet access and I have installed Ubuntu Server onto it. I have that all up and running nicely but now I'd like to install Xfce, GNOME or something similar so I can load up a desktop environment from the command line if I wish. Obviously with internet access or a CDROM, this would be a simple task of using apt-get and it finding & retrieving the packages for me, I assume, but I do not have either. I do however have a USB drive and I have used Unetbootin to make it into a bootable drive with the Ubuntu Server disk image files on there. I have mounted the USB drive to /media/usb0 and tried the command "sudo apt-cdrom add -d /media/usb0" to get apt to recognise the USb drive as an "Ubuntu CD" -- a source of package files but apt-get doesn't seem to be finding Xfce.. I try "sudo apt-get install xfce" and "sudo apt-get install xfce4" but neither find the package.. I would prefer to have Xfce but GNOME would be OK too.. My question is, am I doing something wrong? I figured that the Ubuntu Server disk (or rather, my Ubuntu Server USB drive) might not have any desktop environment packages on there so I tried the Xubuntu Desktop disk too (again, from my USB drive). I tried "sudo apt-get install xubuntu-desktop" but it couldn't find the package - even though it is listed under the /casper/ directory in some MANIFEST file. Anyone see where I'm going wrong? Maybe apt-get install is looking somewhere other than my USB drive? Maybe my commands are wrong? Maybe the disks don't even have the desktop environments on!? Thanks in advance guys, any input would be much appreciated. Cheers - James

    Read the article

  • Stored proc running 30% slower through Java versus running directly on database

    - by James B
    Hi All, I'm using Java 1.6, JTDS 1.2.2 (also just tried 1.2.4 to no avail) and SQL Server 2005 to create a CallableStatement to run a stored procedure (with no parameters). I am seeing the Java wrapper running the same stored procedure 30% slower than using SQL Server Management Studio. I've run the MS SQL profiler and there is little difference in I/O between the two processes, so I don't think it's related to query plan caching. The stored proc takes no arguments and returns no data. It uses a server-side cursor to calculate the values that are needed to populate a table. I can't see how the calling a stored proc from Java should add a 30% overhead, surely it's just a pipe to the database that SQL is sent down and then the database executes it....Could the database be giving the Java app a different query plan?? I've posted to both the MSDN forums, and the sourceforge JTDS forums (topic: "stored proc slower in JTDS than direct in DB") I was wondering if anyone has any suggestions as to why this might be happening? Thanks in advance, -James (N.B. Fear not, I will collate any answers I get in other forums together here once I find the solution) Java code snippet: sLogger.info("Preparing call..."); stmt = mCon.prepareCall("SP_WB200_POPULATE_TABLE_limited_rows"); sLogger.info("Call prepared. Executing procedure..."); stmt.executeQuery(); sLogger.info("Procedure complete."); I have run sql profiler, and found the following: Java app : CPU: 466,514 Reads: 142,478,387 Writes: 284,078 Duration: 983,796 SSMS : CPU: 466,973 Reads: 142,440,401 Writes: 280,244 Duration: 769,851 (Both with DBCC DROPCLEANBUFFERS run prior to profiling, and both produce the correct number of rows) So my conclusion is that they both execute the same reads and writes, it's just that the way they are doing it is different, what do you guys think? It turns out that the query plans are significantly different for the different clients (the Java client is updating an index during an insert that isn't in the faster SQL client, also, the way it is executing joins is different (nested loops Vs. gather streams, nested loops Vs index scans, argh!)). Quite why this is, I don't know yet (I'll re-post when I do get to the bottom of it) Epilogue I couldn't get this to work properly. I tried homogenising the connection properties (arithabort, ansi_nulls etc) between the Java and Mgmt studio clients. It ended up the two different clients had very similar query/execution plans (but still with different actual plan_ids). I posted a summary of what I found to the MSDN SQL Server forums as I found differing performance not just between a JDBC client and management studio, but also between Microsoft's own command line client, SQLCMD, I also checked some more radical things like network traffic too, or wrapping the stored proc inside another stored proc, just for grins. I have a feeling the problem lies somewhere in the way the cursor was being executed, and it was somehow giving rise to the Java process being suspended, but why a different client should give rise to this different locking/waiting behaviour when nothing else is running and the same execution plan is in operation is a little beyond my skills (I'm no DBA!). As a result, I have decided that 4 days is enough of anyone's time to waste on something like this, so I will grudgingly code around it (if I'm honest, the stored procedure needed re-coding to be more incremental instead of re-calculating all data each week anyway), and chalk this one down to experience. I'll leave the question open, big thanks to everyone who put their hat in the ring, it was all useful, and if anyone comes up with anything further, I'd love to hear some more options...and if anyone finds this post as a result of seeing this behaviour in their own environments, then hopefully there's some pointers here that you can try yourself, and hope fully see further than we did. I'm ready for my weekend now! -James

    Read the article

  • Back from Russia

    - by Stephen Walther
    Thanks everyone who came to my talks on ASP.NET Web Forms and MVC in Moscow last week!  Here are the slide decks and demo code for the two talks (You need Visual Studio 2010):   What’s New in ASP.NET MVC 2?   What’s New in ASP.NET 4 Web Forms?   I had a great time in Russia. On the second day, I had an opportunity to walk around Moscow. Here’s a picture of me standing in Red Square:   Here’s a picture of me eating Chicken Kiev with Microsoft evangelist James Senior. James has just started his worldwide Web Camp tour to promote ASP.NET 4. He is traveling non-stop country to country. After Russia, he is off to China and Australia. You can find out more about the Web Camps here: http://www.webcamps.ms/

    Read the article

  • 2D Barcode Addendum

    - by Tim Dexter
    Having finally got my external drive back(long story) today from Oklahoma (thank you so much Sammy) Im back with a full compliment of Oracle and blogging tools at my disposal. I have missed JDeveloper this past week, which I have found, I immensely prefer over Eclipse (let the flaming commence :0) I use Zoundry Raven for writing articles and its not installed locally but on my external drove, so I have been soldiering on with the blog server's pain in the backside UI for writing. Now I have my favority editor back and things are calming down workwise, I will start to get the Excel template posts out. Today thou, a note about 2D barcode support or more specifically any barcode that needs some data manipulation before the barcode font is applied. I wrote about these fonts a long time back and laid out the java class you would need to write if you had an algorithm from the font manufacturer to use. I missed out a valuable point and James at Luminex fell into the trap. He was wanting to use the datamatrix font from IDAutomation but and had built the java class to be called from the RTF template but it was not encoding or at least did not appear to be. New debugging feature to the rescue. Kan over at the bipconsultng blog documented the feature a while back. Just adding <?xdo-debug-level:'STATEMENT'?> to my test template generated all the debug files in my c:\temp directory. No messing with files, just a simple command ... at last! Kan has documented the feature here. With the log in hand I spotted a java error stack referencing a missing code128a method, huh? Looking at James' class he had the following snippet: ENCODERS.put("code128a",mUtility.getClass().getMethod("code128a",clazz)); ENCODERS.put("code128b",mUtility.getClass().getMethod("code128b", clazz)); ENCODERS.put("code128c",mUtility.getClass().getMethod("code128c", clazz)); ENCODERS.put("pdf417",mUtility.getClass().getMethod("pdf417", clazz)); ENCODERS.put("datamatrix",mUtility.getClass().getMethod("datamatrix", clazz)); His class did not include the other code128 and pdf147 methods and BIP was expecting them. An easy fix, just comment them out, rebuild and deploy and the encoding started working. If you are hitting similar problems, check that class and ensure all of the referenced methods are available, if not, delete or get commenting. James now has purdy labels popping out that his hard ware can read, sweet!

    Read the article

  • links for 2010-04-07

    - by Bob Rhubart
    James McGovern: Enterprise Architecture and Social CRM "With a few exceptions, the vast majority of enterprise architects I know spend an awful lot of time focused on internal issues whether it is rationalization, the cloud, storage governance, data center consolidation, creation of reference architectures, portfolio management and other considerations that aren’t even visible to customers. One should ask whether IT can be truly successful if we are busy listening to the business but otherwise are blissfully ignorant towards the customers they serve." -- James McGovern (tags: enterprisearchitecture crm socialcomputing) WRF Benchmark: X6275 Beats Power6 - BestPerf "Oracle's Sun Blade X6275 cluster is 28% faster than the IBM POWER6 cluster on Weather Research and Forecasting (WRF) continental United Status (CONUS) benchmark datasets. The Sun Blade X6275 cluster used a Quad Data Rate (QDR) InfiniBand connection along with Intel compilers and MPI." (tags: oracle sun x6275 benchmarks)

    Read the article

  • Even EA's Have Bad Days - it's Time to Reset

    - by Pat Shepherd
    I saw this article and thought I'd share it because, even we EA's have bad days and the 7 points listed are a great way for you to hit the "reset" button. From Geoffrey James on INC.COM, here are 7 ways to change your view of things when, say, you are hitting a frustration point coordinating stakeholders to agree on an approach (never happens, right?) Positive Thinking: 7 Easy Ways to Improve a Bad Day http://www.inc.com/geoffrey-james/positive-thinking-7-easy-ways-to-improve-a-bad-day.html To paraphrase:          You can decide (in an instant) to change patterns of the past          Believe in (or even visualize) good things happening, and they will          Keep a healthy perspective on the work-life / life-life continuum (what things REALLY matter in the big scheme of things)                  Focus on the good (the laws of positive-attraction apply)

    Read the article

  • OpenJDK DIO Project Now Live! Java SE Embedded API Accessing Peripherals

    - by hinkmond
    The DIO project on OpenJDK is now live! For those who grew up in the 1970's and 1980's, you might remember Ronnie James Dio, lead singer of Black Sabbath after Ozzy was fired, and lead singer of his own band, Dio. Well, this DIO is not that Dio. This DIO is the OpenJDK Device I/O project which provides a Java-level API for accessing generic device peripherals on embedded devices, like your Raspberry Pi running Java SE Embedded software. See: OpenJDK DIO Project Here's a quote: + General Purpose Input/Output (GPIO) + Inter-Integrated Circuit Bus (I2C) + Universal Asynchronous Receiver/Transmitter (UART) + Serial Peripheral Interface If you're familiar with Pi4J, then you're going to like DIO. And, if you liked Ozzy, you probably liked Ronnie James Dio. This will probably make Robert Savage happy too. The part about DIO being live now, not the part about Dio replacing Ozzy, because everyone likes Ozzy. Hinkmond

    Read the article

  • Where'd My Data Go? (and/or...How Do I Get Rid of It?)

    - by David Paquette
    Want to get a better idea of how cascade deletes work in Entity Framework Code First scenarios? Want to see it in action? Stick with us as we quickly demystify what happens when you tell your data context to nuke a parent entity. This post is authored by Calgary .NET User Group Leader David Paquette with help from Microsoft MVP in Asp.Net James Chambers. We got to spend a great week back in March at Prairie Dev Con West, chalk full of sessions, presentations, workshops, conversations and, of course, questions.  One of the questions that came up during my session: "How does Entity Framework Code First deal with cascading deletes?". James and I had different thoughts on what the default was, if it was different from SQL server, if it was the same as EF proper and if there was a way to override whatever the default was.  So we built a set of examples and figured out that the answer is simple: it depends.  (Download Samples) Consider the example of a hockey league. You have several different entities in the league including games, teams that play the games and players that make up the teams. Each team also has a mascot.  If you delete a team, we need a couple of things to happen: The team, games and mascot will be deleted, and The players for that team will remain in the league (and therefore the database) but they should no longer be assigned to a team. So, let's make this start to come together with a look at the default behaviour in SQL when using an EDMX-driven project. The Reference – Understanding EF's Behaviour with an EDMX/DB First Approach First up let’s take a look at the DB first approach.  In the database, we defined 4 tables: Teams, Players, Mascots, and Games.  We also defined 4 foreign keys as follows: Players.Team_Id (NULL) –> Teams.Id Mascots.Id (NOT NULL) –> Teams.Id (ON DELETE CASCADE) Games.HomeTeam_Id (NOT NULL) –> Teams.Id Games.AwayTeam_Id (NOT NULL) –> Teams.Id Note that by specifying ON DELETE CASCADE for the Mascots –> Teams foreign key, the database will automatically delete the team’s mascot when the team is deleted.  While we want the same behaviour for the Games –> Teams foreign keys, it is not possible to accomplish this using ON DELETE CASCADE in SQL Server.  Specifying a ON DELETE CASCADE on these foreign keys would cause a circular reference error: The series of cascading referential actions triggered by a single DELETE or UPDATE must form a tree that contains no circular references. No table can appear more than one time in the list of all cascading referential actions that result from the DELETE or UPDATE – MSDN When we create an entity data model from the above database, we get the following:   In order to get the Games to be deleted when the Team is deleted, we need to specify End1 OnDelete action of Cascade for the HomeGames and AwayGames associations.   Now, we have an Entity Data Model that accomplishes what we set out to do.  One caveat here is that Entity Framework will only properly handle the cascading delete when the the players and games for the team have been loaded into memory.  For a more detailed look at Cascade Delete in EF Database First, take a look at this blog post by Alex James.   Building The Same Sample with EF Code First Next, we're going to build up the model with the code first approach.  EF Code First is defined on the Ado.Net team blog as such: Code First allows you to define your model using C# or VB.Net classes, optionally additional configuration can be performed using attributes on your classes and properties or by using a Fluent API. Your model can be used to generate a database schema or to map to an existing database. Entity Framework Code First follows some conventions to determine when to cascade delete on a relationship.  More details can be found on MSDN: If a foreign key on the dependent entity is not nullable, then Code First sets cascade delete on the relationship. If a foreign key on the dependent entity is nullable, Code First does not set cascade delete on the relationship, and when the principal is deleted the foreign key will be set to null. The multiplicity and cascade delete behavior detected by convention can be overridden by using the fluent API. For more information, see Configuring Relationships with Fluent API (Code First). Our DbContext consists of 4 DbSets: public DbSet<Team> Teams { get; set; } public DbSet<Player> Players { get; set; } public DbSet<Mascot> Mascots { get; set; } public DbSet<Game> Games { get; set; } When we set the Mascot –> Team relationship to required, Entity Framework will automatically delete the Mascot when the Team is deleted.  This can be done either using the [Required] data annotation attribute, or by overriding the OnModelCreating method of your DbContext and using the fluent API. Data Annotations: public class Mascot { public int Id { get; set; } public string Name { get; set; } [Required] public virtual Team Team { get; set; } } Fluent API: protected override void OnModelCreating(DbModelBuilder modelBuilder) { modelBuilder.Entity<Mascot>().HasRequired(m => m.Team); } The Player –> Team relationship is automatically handled by the Code First conventions. When a Team is deleted, the Team property for all the players on that team will be set to null.  No additional configuration is required, however all the Player entities must be loaded into memory for the cascading to work properly. The Game –> Team relationship causes some grief in our Code First example.  If we try setting the HomeTeam and AwayTeam relationships to required, Entity Framework will attempt to set On Cascade Delete for the HomeTeam and AwayTeam foreign keys when creating the database tables.  As we saw in the database first example, this causes a circular reference error and throws the following SqlException: Introducing FOREIGN KEY constraint 'FK_Games_Teams_AwayTeam_Id' on table 'Games' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints. Could not create constraint. To solve this problem, we need to disable the default cascade delete behaviour using the fluent API: protected override void OnModelCreating(DbModelBuilder modelBuilder) { modelBuilder.Entity<Mascot>().HasRequired(m => m.Team); modelBuilder.Entity<Team>() .HasMany(t => t.HomeGames) .WithRequired(g => g.HomeTeam) .WillCascadeOnDelete(false); modelBuilder.Entity<Team>() .HasMany(t => t.AwayGames) .WithRequired(g => g.AwayTeam) .WillCascadeOnDelete(false); base.OnModelCreating(modelBuilder); } Unfortunately, this means we need to manually manage the cascade delete behaviour.  When a Team is deleted, we need to manually delete all the home and away Games for that Team. foreach (Game awayGame in jets.AwayGames.ToArray()) { entities.Games.Remove(awayGame); } foreach (Game homeGame in homeGames) { entities.Games.Remove(homeGame); } entities.Teams.Remove(jets); entities.SaveChanges();   Overriding the Defaults – When and How To As you have seen, the default behaviour of Entity Framework Code First can be overridden using the fluent API.  This can be done by overriding the OnModelCreating method of your DbContext, or by creating separate model override files for each entity.  More information is available on MSDN.   Going Further These were simple examples but they helped us illustrate a couple of points. First of all, we were able to demonstrate the default behaviour of Entity Framework when dealing with cascading deletes, specifically how entity relationships affect the outcome. Secondly, we showed you how to modify the code and control the behaviour to get the outcome you're looking for. Finally, we showed you how easy it is to explore this kind of thing, and we're hoping that you get a chance to experiment even further. For example, did you know that: Entity Framework Code First also works seamlessly with SQL Azure (MSDN) Database creation defaults can be overridden using a variety of IDatabaseInitializers  (Understanding Database Initializers) You can use Code Based migrations to manage database upgrades as your model continues to evolve (MSDN) Next Steps There's no time like the present to start the learning, so here's what you need to do: Get up-to-date in Visual Studio 2010 (VS2010 | SP1) or Visual Studio 2012 (VS2012) Build yourself a project to try these concepts out (or download the sample project) Get into the community and ask questions! There are a ton of great resources out there and community members willing to help you out (like these two guys!). Good luck! About the Authors David Paquette works as a lead developer at P2 Energy Solutions in Calgary, Alberta where he builds commercial software products for the energy industry.  Outside of work, David enjoys outdoor camping, fishing, and skiing. David is also active in the software community giving presentations both locally and at conferences. David also serves as the President of Calgary .Net User Group. James Chambers crafts software awesomeness with an incredible team at LogiSense Corp, based in Cambridge, Ontario. A husband, father and humanitarian, he is currently residing in the province of Manitoba where he resists the urge to cheer for the Jets and maintains he allegiance to the Calgary Flames. When he's not active with the family, outdoors or volunteering, you can find James speaking at conferences and user groups across the country about web development and related technologies.

    Read the article

  • Podcast Show Notes: The Role of the Cloud Architect

    - by Bob Rhubart
    Ron Batra James Baty If you want to understand what a cloud architect does, what better way than to talk to people in that role? In this program that’s exactly what we’ll do. Joining me for this conversation are cloud architects Ron Batra and Dr. James Baty. Ron is an Oracle ACE Director and product director for cloud computing at AT&T , and Jim is Vice President of Oracle’s Global Enterprise Architecture Program . This interview was recorded on June 12, 2012. The Conversation Listen to Part 1: How cloud computing is driving the supply-chaining of IT and the democratization of the activity of architecture. Listen to Part 2 (July 12): A discussion of DevOps, cloud computing, and the increasing velocity of IT. Listen to Part 3 (July 19): Why architects need to up their game to thrive and succeed in a cloud-driven world. Coming Soon A conversation about the International SOA, Cloud & Service Technology Symposium with a panel that features Thomas Erl and several Oracle community members who will be presenting at that event.

    Read the article

  • "Yes, but that's niche."

    - by Geertjan
    JavaOne 2012 has come to an end though it feels like it hasn't even started yet! What happened, time is a weird thing. Too many things to report on. James Gosling's appearance at the JavaOne community keynote was seen, by everyone (which is quite a lot) of people I talked to, as the highlight of the conference. It was interesting that the software for the Duke's Choice Award winning Liquid Robotics that James Gosling is now part of and came to talk about is a Swing application that uses the WorldWind libraries. It was also interesting that James Gosling pointed out to the conference: "There are things you can't do using HTML." That brings me to the wonderful counter argument to the above, which I spend my time running into a lot: "Yes, but that's niche." It's a killer argument, i.e., it kills all discussions completely in one fell swoop. Kind of when you're talking about someone and then this sentence drops into the conversation: "Yes, but she's got cancer now." Here's one implementation of "Yes, but that's niche": Person A: All applications are moving to the web, tablet, and mobile phone. That's especially true now with HTML5, which is going to wipe away everything everywhere and all applications are going to be browser based. Person B: What about air traffic control applications? Will they run on mobile phones too? And do you see defence applications running in a browser? Don't you agree that there are multiple scenarios imaginable where the Java desktop is the optimal platform for running applications? Person A: Yes, but that's niche. Here's another implementation, though it contradicts the above [despite often being used by the same people], since JavaFX is a Java desktop technology: Person A: Swing is dead. Everyone is going to be using purely JavaFX and nothing else. Person B: Does JavaFX have a docking framework and a module system? Does it have a plugin system?  These are some of the absolutely basic requirements of Java desktop software once you get to high end systems, e.g., banks, defence force, oil/gas services. Those kinds of applications need a web browser and so they love the JavaFX WebView component and they also love the animated JavaFX charting components. But they need so much more than that, i.e., an application framework. Aren't there requirements that JavaFX isn't meeting since it is a UI toolkit, just like Swing is a UI toolkit, and what they have in common is their lack, i.e., natively, of any kind of application framework? Don't people need more than a single window and a monolithic application structure? Person A: Yes, but that's niche. In other words, anything that doesn't fit within the currently dominant philosophy is "niche", for no other reason than that it doesn't fit within the currently dominant philosophy... regardless of the actual needs of real developers. Saying "Yes, but that's niche", kills the discussion completely, because it relegates one side of the conversation to the arcane and irrelevant corners of the universe. You're kind of like Cobol now, as soon as "Yes, but that's niche" is said. What's worst about "Yes, but that's niche" is that it doesn't enter into any discussion about user requirements, i.e., there's so few that need this particular solution that we don't even need to talk about them anymore. Note, of course, that I'm not referring specifically or generically to anyone or anything in particular. Just picking up from conversations I've picked up on as I was scurrying around the Hilton's corridors while looking for the location of my next presentation over the past few days. It does, however, mean that there were people thinking "Yes, but that's niche" while listening to James Gosling pointing out that HTML is not the be-all and end-all of absolutely everything. And so this all leaves me wondering: How many applications must be part of a niche for the niche to no longer be a niche? And what if there are multiple small niches that have the same requirements? Don't all those small niches together form a larger whole, one that should be taken seriously, i.e., a whole that is not a niche?

    Read the article

  • Updates about Multidimensional vs Tabular #ssas #msbi

    - by Marco Russo (SQLBI)
    I recently read the blog post from James Serra Tabular model: Not ready for prime time? (read also the comments because there are discussions about a few points raised by James) and the following post from Christian Wade Multidimensional or Tabular. In the last 2 years I worked with many companies adopting Tabular in different scenarios and I agree with some of the points expressed by James in his post (especially about missing features in Tabular if compared to Multidimensional), but I strongly disagree in others. In general, Tabular is a good choice for a new project when: the development team does not have a good knowledge of Multidimensional and MDX (DAX is faster to learn, not so easy as it is sold by MS, but definitely easier than MDX) you don’t need calculations based on hierarchies (common in certain financial applications, but not so common as it could seem) there are important calculations based on distinct count measures there are complex calculations based on many-to-many relationships Until now, I never suggested to migrate an existing Multidimensional model to a Tabular one. There should be very important reasons for that, such as performance issues in distinct count and many-to-many relationships that cannot be easily solved by optimizing the Multidimensional model, but I still never encountered this scenario. I would say that in 80% of the new projects, you might use either Multidimensional or Tabular and the real difference is the time-to-market depending on the skills of the development team. So it’s not strange that who is used to Multidimensional is not moving to Tabular, not getting a particular benefit from the new model unless specific requirements exist. The recent DAXMD feature that allows using SharePoint Power View on Multidimensional is a really important one, even if I’d like having also Excel Power View enabled for this scenario (this should be just a question of time). Another scenario in which I’m seeing a growing adoption of Tabular is in companies that creates models for their product/service and do that by using XMLA or Tabular AMO 2012. I am used to call them ISVs, even if those providing services cannot be really defined in this way. These companies are facing the multitenancy challenge with Tabular and even if this is a niche market, I see some potential here, because adopting Tabular seems a much more natural choice than Multidimensional in those scenario where an analytical engine has to be embedded to deliver one of the features of a larger product/service delivered to customers. I’d like to see other feedbacks in the comments: tell your story of choosing between Tabular and Multidimensional in a BI project you started with SQL Server 2012, thanks!

    Read the article

  • Implementing Unit Testing with the iPhone SDK

    - by ing0
    Hi, So I've followed this tutorial to setup unit testing on my app when I got a little stuck. At bullet point 8 in that tutorial it shows this image, which is what I should be expecting when I build: However this isn't what I get when I build. I get this error message: Command /bin/sh failed with exit code 1 as well as the error message the unit test has created. Then, when I expand on the first error I get this: PhaseScriptExecution "Run Script" "build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh" cd "/Users/james/Desktop/FYP/3D Pool" setenv ACTION build setenv ALTERNATE_GROUP staff ... setenv XCODE_VERSION_MAJOR 0300 setenv XCODE_VERSION_MINOR 0320 setenv YACC /Developer/usr/bin/yacc /bin/sh -c "\"/Users/james/Desktop/FYP/3D Pool/build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh\"" /Developer/Tools/RunPlatformUnitTests.include:412: note: Started tests for architectures 'i386' /Developer/Tools/RunPlatformUnitTests.include:419: note: Running tests for architecture 'i386' (GC OFF) objc[12589]: GC: forcing GC OFF because OBJC_DISABLE_GC is set Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' started at 2010-01-04 21:05:06 +0000 Test Suite 'LogicTests' started at 2010-01-04 21:05:06 +0000 Test Case '-[LogicTests testFail]' started. /Users/james/Desktop/FYP/3D Pool/LogicTests.m:17: error: -[LogicTests testFail] : Must fail to succeed. Test Case '-[LogicTests testFail]' failed (0.000 seconds). Test Suite 'LogicTests' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.000) seconds Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.002) seconds /Developer/Tools/RunPlatformUnitTests.include:448: error: Failed tests for architecture 'i386' (GC OFF) /Developer/Tools/RunPlatformUnitTests.include:462: note: Completed tests for architectures 'i386' Command /bin/sh failed with exit code 1 Now this is very odd as it is running the tests (and succeeding as you can see my STFail firing) because if I add a different test which passes I get no errors, so the tests are working fine. But why am I getting this extra build fail? It may also be of note that when downloading solutions/templates which should work out the box, I get the same error. I'm guessing I've set something up wrong here but I've just followed a tutorial 100% correctly!! If anyone could help I'd be very grateful! Thanks EDIT: According to this blog, this post and a few other websites, I'm not the only one getting this problem. It has been like this since the release of xCode 3.2, assuming the apple dev center documents and tutorials etc are pre-3.2 as well. However some say its a known issue whereas others seem to think this was intentional. I for one would like both the extended console and in code messages, and I certainly do not like the "Command /bin/sh..." error and really think they would have documented such an update. Hopefully it will be fixed soon anyway. UPDATE: Here's confirmation it's something changed since the release of xCode 3.2.1. This image: is from my test build using 3.2.1. This one is from an older version (3.1.4): . (The project for both was unchanged). Edit: Image URLS updated.

    Read the article

  • Windows 7 64 / Visual Studio 2008 / OpenCV2.1 error: "The application was unable to start correctly

    - by James
    Hey all, I'm building OpenCV2.1 from top of branch in 64 bit mode, when I link the libraries against my code (that works in 32 bit mode on XP), I get the dialog: "The application was unable to start correctly (0xc0150002) Click OK to close the application" When I start the application. The event viewer is pointing at one of the OpenCV dll's & says it's a Side-by-Side error, but I'm definitely building OpenCV & my code as a 64 bit compile, and there are no errors during that process. I've tried fiddling with the /MTd options & it doesn't help. Some (almost) related questions have suggested installing the VS2008 redistributable package, but I'm building using vs2008 pro, that seems like madness? Is it still necessary to install the package in my case? Any help, including the cause of these side-by-side errors, would be appreciated. James

    Read the article

  • Disable eclipselink caching and query caching - not working?

    - by James
    I am using eclipselink JPA with a database which is also being updated externally to my application. For that reason there are tables I want to query every few seconds. I can't get this to work even when I try to disable the cache and query cache. For example: EntityManagerFactory entityManagerFactory = Persistence.createEntityManagerFactory("default"); EntityManager em = entityManagerFactory.createEntityManager(); MyLocation one = em.createNamedQuery("MyLocation.findMyLoc").getResultList().get(0); Thread.sleep(10000); MyLocation two = em.createNamedQuery("MyLocation.findMyLoc").getResultList().get(0); System.out.println(one.getCapacity() + " - " + two.getCapacity()); Even though the capacity changes while my application is sleeping the println always prints the same value for one and two. I have added the following to the persistence.xml <property name="eclipselink.cache.shared.default" value="false"/> <property name="eclipselink.query-results-cache" value="false"/> I must be missing something but am running out of ideas. James

    Read the article

  • iPhone Provisioning Profile problems...

    - by James
    I have already successfully submitted two apps to the app store, so I should be able to do it by now, right? With my most recent app, however, I'm having a bear of a time with getting the Application Identifier or Bundle Identifier set up. In my distribution profile, I have included the identifier "com.jmock.irowbeta", and then copied it exactly into the the app's Info.plist file under "Bundle Identifier". In the past, this has done the trick, but now I'm getting the error Provisioning profile 'irow beta' specificies the identifier 'com.jmock.irowbeta' which doesn't match the current setting 'com.yourcompany.irow-beta'. So it seems that its somehow still using the default of com.yourcompany.APPLICATION_NAME, but it shouldn't after I have changed it in the Info.plist, right? I think this means that xcode isn't recognizing that PLIST for some reason, because when I change the name of the icon file, for example, or other such attributes, nothing changes. If this is the problem, how do I make xcode recognize the PLIST? Otherwise, what the heck is going on? Thanks, James

    Read the article

  • Setting an delegate for the UIDatePicker animation?

    - by james.ingham
    If I had a date picker within an action sheet and called the following line: [datePicker setDate:newDate animated:YES]; And then my app hides the action sheet the date picker is within, is there anyway to set up a animation delegate so that the user see's the animation of the date picker first and then hides the action sheet? I have done this with UIView's by calling: [UIView setAnimationDelegate:self]; [UIView setAnimationDidStopSelector:@selector(METHOD)]; However I can not see anything like this for the date picker. Thanks in advanced - James

    Read the article

  • Ninject - initialise objects

    - by James Lin
    Hi guys, I am new to ninject, I am wondering how I can run custom initizlisation code when constructing the injected objects? ie. I have a Sword class which implements IWeapon, but I want to pass an hit point value to the Sword class constructor, how do I achieve that? Do I need to write my own provider? A minor question, IKernel kernel = new StandardKernel(new Module1(), new Module2(), ...); what is the actual use of having multiple modules in Kernel? I sorta understand it, but could someone give me a formal explaination and use case? Thanks a lot! James

    Read the article

  • 100% height on nested table cell in IE

    - by James Cooper
    I want a nested table to expand to the height of the enclosing cell. This works as expected in Firefox/Chrome/Safari, but not in IE7 or IE8. Please see the example here: http://www.bitmechanic.com/heightDemo.html The DOCTYPE is relevant. While the demo above validates as HTML 4.01 Strict, it does not render properly in IE7. If I remove the DOCTYPE entirely, or set it to HTML 3.2, it renders properly in IE. Any suggestions on how to get this to render in 4.01 (strict or loose)? The actual web site is a bit more complicated -- changing the DOCTYPE will cause all sorts of other problems. We're struggling to understand the (presumed) IE bug here and how to work around it. thanks -- James

    Read the article

  • Objective C selector memory managment (does this leak memory)?

    - by James Jones
    - (IBAction) someButtonCall { if(!someCondition) { someButtonCallBack = @selector(someButtonCall); [self presentModalViewController:someController animated:YES]; } else ... } //Called from someController - (void) someControllerFinished:(BOOL) ok { [self dismissModalViewControllerAnimated:YES]; if(ok) [self performSelector:someButtonCallBack]; else ... } I'm wondering if the user keeps getting into the !someCondition clause if the selector is leaked by assigning a new selector each time (the code above is hypothetical and not what i'm doing). Any help is appreciated. Thanks, James Jones

    Read the article

  • GoogleAppEngine : JAR for enhancer not found, yet ASM is on the classpath

    - by James.Elsey
    When deploying my application to GoogleAppEngine I'm getting the following message after the upload Exception in thread "Thread-0" You have selected to use ClassEnhancer "ASM" yet the JAR for that enhancer does not seem to be in the CLASSPATH! org.datanucleus.enhancer.NucleusEnhanceException: You have selected to use ClassEnhancer "ASM" yet the JAR for that enhancer does not seem to be in the CLASSPATH! at org.datanucleus.enhancer.DataNucleusEnhancer.init(DataNucleusEnhancer.java:212) at org.datanucleus.enhancer.DataNucleusEnhancer.addClasses(DataNucleusEnhancer.java:370) at org.datanucleus.enhancer.EnhancerProcessor$EnhanceRunnable.run(EnhancerProcessor.java:163) at java.lang.Thread.run(Thread.java:636) I'm not sure why this is happening, since I have the following in my POM <dependency> <groupId>asm</groupId> <artifactId>asm</artifactId> <version>3.2</version> </dependency> Which is required by GAE, and the ASM jar is located in the target directory, so I'm failing to see what the issue is Any ideas? [james@nevada gae-deployment]$ ls target/salestracker/WEB-INF/lib/asm* target/salestracker/WEB-INF/lib/asm-3.2.jar

    Read the article

  • Reflection and changing a variables type at runtime?

    - by james-west
    Hi I'm trying to create an object Of a specific type. I've got the following code, but it fails because it can't cast the new table object to the one that is already defined. I need table to start of an IEnumerable type so I can't declare is an object. Public sub getTable(ByVal t as Type) Dim table As Table(Of Object) Dim tableType As Type = GetType(Table(Of )).MakeGenericType(t) table = FormatterServices.GetUninitializedObject(tableType) End sub So in short - is there a way of changing a variable type at runtime? (or a better way of doing what I'm doing) Thanks in advance. James

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >