Search Results

Search found 500 results on 20 pages for 'resultset'.

Page 5/20 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Is it faster to use a complicated boolean to limit a ResultSet at the MySQL end or at the Java end?

    - by javanix
    Lets say I have a really big table filled with lots of data (say, enough not to fit comfortably in memory), and I want to analyze a subset of the rows. Is it generally faster to do: SELECT (column1, column2, ... , columnN) FROM table WHERE (some complicated boolean clause); and then use the ResultSet, or is it faster to do: SELECT (column1, column2, ... , columnN) FROM table; and then iterate over the ResultSet, accepting different rows based on a java version of your boolean condition? I think it comes down to whether the Java iterator/boolean evaluator is faster than the MySQL boolean evaluator.

    Read the article

  • How do I make a Java ResultSet available in my jsp?

    - by melling
    I'd like to swap out an sql:query for some Java code that builds a complex query with several parameters. The current sql is a simple select. <sql:query var="result" dataSource="${dSource}" sql="select * from TABLE " </sql:query How do I take my Java ResultSet (ie. rs = stmt.executeQuery(sql);) and make the results available in my JSP so I can do this textbook JSP? To be more clear, I want to remove the above query and replace it with Java. <% ResultSet rs = stmt.executeQuery(sql); // Messy code will be in some Controller % <c:forEach var="row" items="${result.rows}" <c:out value="${row.name}"/ </c:forEach Do I set the session/page variable in the Java section or is there some EL trick that I can use to access the variable?

    Read the article

  • Can the Sequence of RecordSets in a Multiple RecordSet ADO.Net resultset be determined, controlled?

    - by Shiva
    I am using code similar to this Support / KB article to return multiple recordsets to my C# program. But I don't want C# code to be dependant on the physical sequence of the recordsets returned, in order to do it's job. So my question is, "Is there a way to determine which set of records from a multiplerecordset resultset am I currently processing?" I know I could probably decipher this indirectly by looking for a unique column name or something per resultset, but I think/hope there is a better way. P.S. I am using Visual Studio 2008 Pro & SQL Server 2008 Express Edition.

    Read the article

  • In a JDBC ResultSet, what should happen when getLong() or getShort() is called on an int result colu

    - by Uri
    Say that I have a JDBC ResultSet, and I call the getLong() or getshort() method. For which of the following SQL types {SMALLINT, INT, BIGINT} should I get long, and for which types should I get an error? In other words, if I have an INT and I want a SMALLINT (A short), would I get it, or would I get an error? Similarly, if I have an INT and want a BIGINT (a long), would I get it, or would I get an error? The Javadocs (listed below) say nothing. public long getLong(int columnIndex) throws SQLException Retrieves the value of the designated column in the current row of this ResultSet object as a long in the Java programming language. Parameters: columnIndex - the first column is 1, the second is 2, ... Returns: the column value; if the value is SQL NULL, the value returned is 0 Throws: SQLException - if a database access error occurs

    Read the article

  • Why do I keep on getting an exception-illegal operation on ResultSet?

    - by eli1987
    Here is the code-admittedly I'm terrible at Java, but surely I catch a null result set with the if....else statement....sorry its the whole Class: /* * To change this template, choose Tools | Templates * and open the template in the editor. */ /* * SearchParts.java * * Created on 08-Mar-2010, 12:14:31 */ package garits; import java.sql.*; import javax.swing.*; /** * * @author Deniz */ public class SearchParts extends javax.swing.JFrame { /** Creates new form SearchParts */ public SearchParts() { initComponents(); } /** This method is called from within the constructor to * initialize the form. * WARNING: Do NOT modify this code. The content of this method is * always regenerated by the Form Editor. */ @SuppressWarnings("unchecked") private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) { if (!jTextField1.getText().equals("")) { String result = ""; int Partnumber = Integer.parseInt(jTextField1.getText()); DB db = new DB(); try { db.connect(); String query = "Select * from Stock Where Part_no =" + "'" + jTextField1.getText() + "'"; ResultSet rs = db.execSQL(query); if (rs.equals(null)) { PartNotFound nf = new PartNotFound(); nf.setVisible(true); } else { ResultSetMetaData rsmd = rs.getMetaData(); int numberOfColumns = rsmd.getColumnCount(); int RowCount = 0; for (int i = 1; i < numberOfColumns; i++) { rs.getString(i); result += i + "/n"; } if (!result.equals("")) { Receptionist_FranchiseePartFound part = new Receptionist_FranchiseePartFound(); part.setVisible(true); while (rs.next()) { RowCount++; } part.getTable().addRowSelectionInterval(0, RowCount); } else { PartNotFound nf = new PartNotFound(); } } } catch (Exception e) { e.printStackTrace(); JOptionPane.showMessageDialog(jButton1, "More information needed for search", "Error Message", JOptionPane.ERROR_MESSAGE); } } else if (!jTextField2.getText().equals("")) { String result = ""; DB db = new DB(); try { db.connect(); String query = "Select * from Stock Where Part_name =" + "'" + jTextField2.getText() + "'"; ResultSet rs = db.execSQL(query); if (rs.equals(null)) { PartNotFound nf = new PartNotFound(); nf.setVisible(true); } else { ResultSetMetaData rsmd = rs.getMetaData(); int numberOfColumns = rsmd.getColumnCount(); int RowCount = 0; for (int i = 1; i < numberOfColumns; i++) { rs.getString(i); result += i + "/n"; } // Receptionist_FranchiseePartFound part = new Receptionist_FranchiseePartFound(); // part.setVisible(true); if (!result.equals("")) { Receptionist_FranchiseePartFound part = new Receptionist_FranchiseePartFound(); part.setVisible(true); while (rs.next()) { RowCount++; } part.getTable().addRowSelectionInterval(0, RowCount); } else { PartNotFound nf = new PartNotFound(); nf.setVisible(true); } } } catch (Exception e) { e.printStackTrace(); JOptionPane.showMessageDialog(jButton1, "More information needed for search", "Error Message", JOptionPane.ERROR_MESSAGE); } } else if (jTextField1.getText().equals("") && jTextField2.getText().equals("")) { String result = ""; DB db = new DB(); try { db.connect(); String query = "Select * from Stock Where Manufacturer =" + "'" + jTextField3.getText() + "'AND Vehicle_type ='" + jTextField4.getText() + "'"; ResultSet rs = db.execSQL(query); if (rs.equals(null)) { PartNotFound nf = new PartNotFound(); nf.setVisible(true); } else{ ResultSetMetaData rsmd = rs.getMetaData(); int numberOfColumns = rsmd.getColumnCount(); int RowCount = 0; for (int i = 1; i < numberOfColumns; i++) { rs.getString(i); result += i + "/n"; } // Receptionist_FranchiseePartFound part = new Receptionist_FranchiseePartFound(); // part.setVisible(true); if (!result.equals("")) { Receptionist_FranchiseePartFound part = new Receptionist_FranchiseePartFound(); part.setVisible(true); while (rs.next()) { RowCount++; } part.getTable().addRowSelectionInterval(0, RowCount); } else { PartNotFound nf = new PartNotFound(); nf.setVisible(true); } } } catch (Exception e) { e.printStackTrace(); JOptionPane.showMessageDialog(jButton1, "More information needed for search", "Error Message", JOptionPane.ERROR_MESSAGE); } } else if (jTextField3.getText().equals("") || jTextField4.getText().equals("")) { JOptionPane.showMessageDialog(jButton1, "More information needed for search", "Error Message", JOptionPane.ERROR_MESSAGE); } } /** * @param args the command line arguments */ // Variables declaration - do not modify private javax.swing.JButton jButton1; private javax.swing.JButton jButton2; private javax.swing.JLabel jLabel1; private javax.swing.JLabel jLabel2; private javax.swing.JLabel jLabel3; private javax.swing.JLabel jLabel4; private javax.swing.JLabel jLabel5; private javax.swing.JLabel jLabel6; private javax.swing.JLabel jLabel7; private javax.swing.JLabel jLabel8; private javax.swing.JTextField jTextField1; private javax.swing.JTextField jTextField2; private javax.swing.JTextField jTextField3; private javax.swing.JTextField jTextField4; // End of variables declaration }

    Read the article

  • What's the right way to display a DBIx::Class ResultSet in my Catalyst project that uses Template To

    - by Thelema
    Given a DBIx::Class resultset, for example: my $rs = $c->model("DB::Card")->search({family_name => "Smith"}); the tutorials I've read use the stash to pass an arrayref of rows: $c->stash->{cards} = [$rs->all]; This results in the query getting executed at this point, and the resulting objects stuffed into the stash, so they can be used in TemplateToolkit as: [% FOREACH card IN cards %] [% card.given_name %] [% card.family_name %] [%END%] Is there a proper way to have TT iterate over the rows as they get fetched from the DB?

    Read the article

  • A lock could not obtained within the time requested issue

    - by Wayne Daly
    The title is the error I'm getting, when I click load my program freezes. I assume its because I'm doing a statement inside a statement, but from what I see its the only solution to my issue. By loading I want to just repopulate the list of patients, but to do so I need to do their conditions also. The code works, the bottom method is what I'm trying to fix. I think the issue is that I have 2 statements open but I am not sure. load: public void DatabaseLoad() { try { String Name = "Wayne"; String Pass= "Wayne"; String Host = "jdbc:derby://localhost:1527/Patients"; Connection con = DriverManager.getConnection( Host,Name, Pass); PatientList.clear(); Statement stmt8 = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE); String SQL8 = "SELECT * FROM PATIENTS"; ResultSet rs8 = stmt8.executeQuery( SQL8 ); ArrayList<PatientCondition> PatientConditions1 = new ArrayList(); while(rs8.next()) { PatientConditions1 = LoadPatientConditions(); } Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE); String SQL = "SELECT * FROM PATIENTS"; ResultSet rs = stmt.executeQuery( SQL ); while(rs.next()) { int id = (rs.getInt("ID")); String name = (rs.getString("NAME")); int age = (rs.getInt("AGE")); String address = (rs.getString("ADDRESS")); String sex = (rs.getString("SEX")); String phone = (rs.getString("PHONE")); Patient p = new Patient(id, name, age, address, sex, phone, PatientConditions1); PatientList.add(p); } UpdateTable(); UpdateAllViews(); DefaultListModel PatientListModel = new DefaultListModel(); for (Patient s : PatientList) { PatientListModel.addElement(s.getAccountNumber() + "-" + s.getName()); } PatientJList.setModel(PatientListModel); } catch(SQLException err) { System.out.println(err.getMessage()); } } This is the method that returns the arraylist of patient conditions public ArrayList LoadPatientConditions() { ArrayList<PatientCondition> PatientConditionsTemp = new ArrayList(); try { String Name = "Wayne"; String Pass= "Wayne"; String Host = "jdbc:derby://localhost:1527/Patients"; Connection con = DriverManager.getConnection( Host,Name, Pass); Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE); String SQL = "SELECT * FROM PATIENTCONDITIONS"; ResultSet rs5 = stmt.executeQuery( SQL ); int e = 0; while(rs5.next()) { e++; String ConName = (rs5.getString("CONDITION")); PatientCondition k = new PatientCondition(e,ConName); PatientConditionsTemp.add(k); } } catch(SQLException err) { System.out.println(err.getMessage()); } return PatientConditionsTemp; }

    Read the article

  • TSQL - How to join 1..* from multiple tables in one resultset?

    - by ElHaix
    A location table record has two address id's - mailing and business addressID that refer to an address table. Thus, the address table will contain up to two records for a given addressID. Given a location ID, I need an sproc to return all tbl_Location fields, and all tbl_Address fields in one resultset: LocationID INT, ClientID INT, LocationName NVARCHAR(50), LocationDescription NVARCHAR(50), MailingAddressID INT, BillingAddressID INT, MAddress1 NVARCHAR(255), MAddress2 NVARCHAR(255), MCity NVARCHAR(50), MState NVARCHAR(50), MZip NVARCHAR(10), MCountry CHAR(3), BAddress1 NVARCHAR(255), BAddress2 NVARCHAR(255), BCity NVARCHAR(50), BState NVARCHAR(50), BZip NVARCHAR(10), BCountry CHAR(3) I've started by creating a temp table with the required fields, but am a bit stuck on how to accomplish this. I could do sub-selects for each of the required address fields, but seems a bit messy. I've already got a table-valued-function that accepts an address ID, and returns all fields for that ID, but not sure how to integrate it into my required result. Off hand, it looks like 3 selects to create this table - 1: Location, 2: Mailing address, 3: Billing address. What I'd like to do is just create a view and use that. Any assistance would be helpful. Thanks.

    Read the article

  • SimpleJdbcCall ignoring JdbcTemplate fetch size

    - by user289429
    We are calling the pl/sql stored procedure through Spring SimpleJdbcCall, the fetchsize set on the JdbcTemplate is being ignored by SimpleJdbcCall. The rowmapper resultset fetch size is set to 10 even though we have set the jdbctemplate fetchsize to 200. Any idea why this happens and how to fix it? Have printed the fetchsize of resultset in the rowmapper in the below code snippet - Once it is 200 and other time it is 10 even though I use the same JdbcTemplate on both occassion. This direct execution through jdbctemplate returns fetchsize of 200 in the row mapper jdbcTemplate = new JdbcTemplate(ds); jdbcTemplate.setResultsMapCaseInsensitive(true); jdbcTemplate.setFetchSize(200); List temp = jdbcTemplate.query("select 1 from dual", new ParameterizedRowMapper() { public Object mapRow(ResultSet resultSet, int i) throws SQLException { System.out.println("Direct template : " + resultSet.getFetchSize()); return new String(resultSet.getString(1)); } }); This execution through SimpleJdbcCall is always returning fetchsize of 10 in the rowmapper jdbcCall = new SimpleJdbcCall(jdbcTemplate).withSchemaName(schemaName) .withCatalogName(catalogName).withProcedureName(functionName); jdbcCall.returningResultSet((String) outItValues.next(), new ParameterizedRowMapper<Map<String, Object>>() { public Map<String, Object> mapRow(ResultSet rs, int row) throws SQLException { System.out.println("Through simplejdbccall " + rs.getFetchSize()); return extractRS(rs, row); } }); outputList = (List<Map<String, Object>>) jdbcCall.executeObject(List.class, inParam);

    Read the article

  • How to connect SQLite with Java?

    - by Rajapandian
    Hi, I am using one simple code to access the SQLite database from Java application . My code is import java.sql.Connection; import java.sql.DriverManager; import java.sql.ResultSet; import java.sql.Statement; public class ConnectSQLite { public static void main(String[] args) { Connection connection = null; ResultSet resultSet = null; Statement statement = null; try { Class.forName("org.sqlite.JDBC"); connection = DriverManager.getConnection("jdbc:sqlite:D:\\testdb.db"); statement = connection.createStatement(); resultSet = statement .executeQuery("SELECT EMPNAME FROM EMPLOYEEDETAILS"); while (resultSet.next()) { System.out.println("EMPLOYEE NAME:" + resultSet.getString("EMPNAME")); } } catch (Exception e) { e.printStackTrace(); } finally { try { resultSet.close(); statement.close(); connection.close(); } catch (Exception e) { e.printStackTrace(); } } } } But this code gives one exception like java.lang.ClassNotFoundException: org.sqlite.JDBC Any body knows how to slove it,please help me.

    Read the article

  • Specifying a variable name in QUERY WHERE clause in JDBC

    - by Noona
    Could someone please give me a link on how to create a query in JDBC that gets a variable name in the WHERE statement, or write an example, to be more specific, my code looks something like this: private String getLastModified(String url) { String lastModified = null; ResultSet resultSet; String query = "select LastModified from CacheTable where " + " URL.equals(url)"; try { resultSet = sqlStatement.executeQuery(query); } Now I need the syntax that enables me to return a ResultSet object where URL in the cacheTable equals url from the method's argument. thanks

    Read the article

  • How to include the total number of returned rows in the resultset from SELECT T-SQL command?

    - by quarkX
    I would like to ask if there is a way to include the total number of rows, as an additional column, in the returned result sets from a TSQL query using also the Row_Number (SQL 2005) command. For example, getting the results set from a query against Book table in a form similar to this: RowNum BookId BookTitle TotalRows -------------------------------------------- 1 1056 Title1 5 2 1467 Title2 5 3 121 Title3 5 4 1789 Title4 5 5 789 Title5 5

    Read the article

  • Processing a resultset to look up foriegn keys (and poulate a new table!)

    - by Gilly
    Hi, I've been handed a dataset that has some fairly basic table structures with no keys at all. eg {myRubishTable} - Area(varchar),AuthorityName(varchar),StartYear(varchar),StartMonth(varcha),EndYear(varchar),EndMonth(varchar),Amount(Money) there are other tables that use the Area and AuthorityName columns as well as a general use of Month and Years so I I figured a good first step was to pull Area and Authority into their own tables. I now want to process the data in the original table and lookup the key value to put into my new table with foreign keys which looks like this. (lookup Tables) {Area} - id (int, PK), name (varchar(50)) {AuthorityName} - id(int, PK), name(varchar(50) (TargetTable) {myBetterTable} - id (int,PK), area_id(int FK-Area),authority_name_id(int FK-AuthorityName),StartYear (varchar),StartMonth(varchar),EndYear(varchar),EndMonth(varchar),Amount(money) so row one in the old table read MYAREA, MYAUTHORITY,2009,Jan,2010,Feb,10000 and I want to populate the new table with 1,1,1,2009,Jan,2010,Feb,10000 where the first '1' is the primary key and the second two '1's are the ids in the lookup tables. Can anyone point me to the most efficient way of achieving this using just SQL? Thanks in advance Footnote:- I've achieved what I needed with some pretty simple WHERE clauses (I had left a rogue tablename in the FROM which was throwing me :o( ) but would be interested to know if this is the most efficient. ie SELECT [area].[area_id], [authority].[authority_name_id], [myRubishTable].[StartYear], [myRubishTable].[StartMonth], [myRubishTable].[EndYear], [myRubishTable].[EndMonth], [myRubishTable].[Amount] FROM [myRubishTable],[Area],[AuthorityName] WHERE [myRubishTable].[Area]=[Area].[name] AND [myRubishTable].[Authority Name]=[dim_AuthorityName].[name] TIA

    Read the article

  • The Execute SQL Task

    In this article we are going to take you through the Execute SQL Task in SQL Server Integration Services for SQL Server 2005 (although it appies just as well to SQL Server 2008).  We will be covering all the essentials that you will need to know to effectively use this task and make it as flexible as possible. The things we will be looking at are as follows: A tour of the Task. The properties of the Task. After looking at these introductory topics we will then get into some examples. The examples will show different types of usage for the task: Returning a single value from a SQL query with two input parameters. Returning a rowset from a SQL query. Executing a stored procedure and retrieveing a rowset, a return value, an output parameter value and passing in an input parameter. Passing in the SQL Statement from a variable. Passing in the SQL Statement from a file. Tour Of The Task Before we can start to use the Execute SQL Task in our packages we are going to need to locate it in the toolbox. Let's do that now. Whilst in the Control Flow section of the package expand your toolbox and locate the Execute SQL Task. Below is how we found ours. Now drag the task onto the designer. As you can see from the following image we have a validation error appear telling us that no connection manager has been assigned to the task. This can be easily remedied by creating a connection manager. There are certain types of connection manager that are compatable with this task so we cannot just create any connection manager and these are detailed in a few graphics time. Double click on the task itself to take a look at the custom user interface provided to us for this task. The task will open on the general tab as shown below. Take a bit of time to have a look around here as throughout this article we will be revisting this page many times. Whilst on the general tab, drop down the combobox next to the ConnectionType property. In here you will see the types of connection manager which this task will accept. As with SQL Server 2000 DTS, SSIS allows you to output values from this task in a number of formats. Have a look at the combobox next to the Resultset property. The major difference here is the ability to output into XML. If you drop down the combobox next to the SQLSourceType property you will see the ways in which you can pass a SQL Statement into the task itself. We will have examples of each of these later on but certainly when we saw these for the first time we were very excited. Next to the SQLStatement property if you click in the empty box next to it you will see ellipses appear. Click on them and you will see the very basic query editor that becomes available to you. Alternatively after you have specified a connection manager for the task you can click on the Build Query button to bring up a completely different query editor. This is slightly inconsistent. Once you've finished looking around the general tab, move on to the next tab which is the parameter mapping tab. We shall, again, be visiting this tab throughout the article but to give you an initial heads up this is where you define the input, output and return values from your task. Note this is not where you specify the resultset. If however you now move on to the ResultSet tab this is where you define what variable will receive the output from your SQL Statement in whatever form that is. Property Expressions are one of the most amazing things to happen in SSIS and they will not be covered here as they deserve a whole article to themselves. Watch out for this as their usefulness will astound you. For a more detailed discussion of what should be the parameter markers in the SQL Statements on the General tab and how to map them to variables on the Parameter Mapping tab see Working with Parameters and Return Codes in the Execute SQL Task. Task Properties There are two places where you can specify the properties for your task. One is in the task UI itself and the other is in the property pane which will appear if you right click on your task and select Properties from the context menu. We will be doing plenty of property setting in the UI later so let's take a moment to have a look at the property pane. Below is a graphic showing our properties pane. Now we shall take you through all the properties and tell you exactly what they mean. A lot of these properties you will see across all tasks as well as the package because of everything's base structure The Container. BypassPrepare Should the statement be prepared before sending to the connection manager destination (True/False) Connection This is simply the name of the connection manager that the task will use. We can get this from the connection manager tray at the bottom of the package. DelayValidation Really interesting property and it tells the task to not validate until it actually executes. A usage for this may be that you are operating on table yet to be created but at runtime you know the table will be there. Description Very simply the description of your Task. Disable Should the task be enabled or not? You can also set this through a context menu by right clicking on the task itself. DisableEventHandlers As a result of events that happen in the task, should the event handlers for the container fire? ExecValueVariable The variable assigned here will get or set the execution value of the task. Expressions Expressions as we mentioned earlier are a really powerful tool in SSIS and this graphic below shows us a small peek of what you can do. We select a property on the left and assign an expression to the value of that property on the right causing the value to be dynamically changed at runtime. One of the most obvious uses of this is that the property value can be built dynamically from within the package allowing you a great deal of flexibility FailPackageOnFailure If this task fails does the package? FailParentOnFailure If this task fails does the parent container? A task can he hosted inside another container i.e. the For Each Loop Container and this would then be the parent. ForcedExecutionValue This property allows you to hard code an execution value for the task. ForcedExecutionValueType What is the datatype of the ForcedExecutionValue? ForceExecutionResult Force the task to return a certain execution result. This could then be used by the workflow constraints. Possible values are None, Success, Failure and Completion. ForceExecutionValue Should we force the execution result? IsolationLevel This is the transaction isolation level of the task. IsStoredProcedure Certain optimisations are made by the task if it knows that the query is a Stored Procedure invocation. The docs say this will always be false unless the connection is an ADO connection. LocaleID Gets or sets the LocaleID of the container. LoggingMode Should we log for this container and what settings should we use? The value choices are UseParentSetting, Enabled and Disabled. MaximumErrorCount How many times can the task fail before we call it a day? Name Very simply the name of the task. ResultSetType How do you want the results of your query returned? The choices are ResultSetType_None, ResultSetType_SingleRow, ResultSetType_Rowset and ResultSetType_XML. SqlStatementSource Your Query/SQL Statement. SqlStatementSourceType The method of specifying the query. Your choices here are DirectInput, FileConnection and Variables TimeOut How long should the task wait to receive results? TransactionOption How should the task handle being asked to join a transaction? Usage Examples As we move through the examples we will only cover in them what we think you must know and what we think you should see. This means that some of the more elementary steps like setting up variables will be covered in the early examples but skipped and simply referred to in later ones. All these examples used the AventureWorks database that comes with SQL Server 2005. Returning a Single Value, Passing in Two Input Parameters So the first thing we are going to do is add some variables to our package. The graphic below shows us those variables having been defined. Here the CountOfEmployees variable will be used as the output from the query and EndDate and StartDate will be used as input parameters. As you can see all these variables have been scoped to the package. Scoping allows us to have domains for variables. Each container has a scope and remember a package is a container as well. Variable values of the parent container can be seen in child containers but cannot be passed back up to the parent from a child. Our following graphic has had a number of changes made. The first of those changes is that we have created and assigned an OLEDB connection manager to this Task ExecuteSQL Task Connection. The next thing is we have made sure that the SQLSourceType property is set to Direct Input as we will be writing in our statement ourselves. We have also specified that only a single row will be returned from this query. The expressions we typed in was: SELECT COUNT(*) AS CountOfEmployees FROM HumanResources.Employee WHERE (HireDate BETWEEN ? AND ?) Moving on now to the Parameter Mapping tab this is where we are going to tell the task about our input paramaters. We Add them to the window specifying their direction and datatype. A quick word here about the structure of the variable name. As you can see SSIS has preceeded the variable with the word user. This is a default namespace for variables but you can create your own. When defining your variables if you look at the variables window title bar you will see some icons. If you hover over the last one on the right you will see it says "Choose Variable Columns". If you click the button you will see a list of checkbox options and one of them is namespace. after checking this you will see now where you can define your own namespace. The next tab, result set, is where we need to get back the value(s) returned from our statement and assign to a variable which in our case is CountOfEmployees so we can use it later perhaps. Because we are only returning a single value then if you remember from earlier we are allowed to assign a name to the resultset but it must be the name of the column (or alias) from the query. A really cool feature of Business Intelligence Studio being hosted by Visual Studio is that we get breakpoint support for free. In our package we set a Breakpoint so we can break the package and have a look in a watch window at the variable values as they appear to our task and what the variable value of our resultset is after the task has done the assignment. Here's that window now. As you can see the count of employess that matched the data range was 2. Returning a Rowset In this example we are going to return a resultset back to a variable after the task has executed not just a single row single value. There are no input parameters required so the variables window is nice and straight forward. One variable of type object. Here is the statement that will form the soure for our Resultset. select p.ProductNumber, p.name, pc.Name as ProductCategoryNameFROM Production.ProductCategory pcJOIN Production.ProductSubCategory pscON pc.ProductCategoryID = psc.ProductCategoryIDJOIN Production.Product pON psc.ProductSubCategoryID = p.ProductSubCategoryID We need to make sure that we have selected Full result set as the ResultSet as shown below on the task's General tab. Because there are no input parameters we can skip the parameter mapping tab and move straight to the Result Set tab. Here we need to Add our variable defined earlier and map it to the result name of 0 (remember we covered this earlier) Once we run the task we can again set a breakpoint and have a look at the values coming back from the task. In the following graphic you can see the result set returned to us as a COM object. We can do some pretty interesting things with this COM object and in later articles that is exactly what we shall be doing. Return Values, Input/Output Parameters and Returning a Rowset from a Stored Procedure This example is pretty much going to give us a taste of everything. We have already covered in the previous example how to specify the ResultSet to be a Full result set so we will not cover it again here. For this example we are going to need 4 variables. One for the return value, one for the input parameter, one for the output parameter and one for the result set. Here is the statement we want to execute. Note how much cleaner it is than if you wanted to do it using the current version of DTS. In the Parameter Mapping tab we are going to Add our variables and specify their direction and datatypes. In the Result Set tab we can now map our final variable to the rowset returned from the stored procedure. It really is as simple as that and we were amazed at how much easier it is than in DTS 2000. Passing in the SQL Statement from a Variable SSIS as we have mentioned is hugely more flexible than its predecessor and one of the things you will notice when moving around the tasks and the adapters is that a lot of them accept a variable as an input for something they need. The ExecuteSQL task is no different. It will allow us to pass in a string variable as the SQL Statement. This variable value could have been set earlier on from inside the package or it could have been populated from outside using a configuration. The ResultSet property is set to single row and we'll show you why in a second when we look at the variables. Note also the SQLSourceType property. Here's the General Tab again. Looking at the variable we have in this package you can see we have only two. One for the return value from the statement and one which is obviously for the statement itself. Again we need to map the Result name to our variable and this can be a named Result Name (The column name or alias returned by the query) and not 0. The expected result into our variable should be the amount of rows in the Person.Contact table and if we look in the watch window we see that it is.   Passing in the SQL Statement from a File The final example we are going to show is a really interesting one. We are going to pass in the SQL statement to the task by using a file connection manager. The file itself contains the statement to run. The first thing we are going to need to do is create our file connection mananger to point to our file. Click in the connections tray at the bottom of the designer, right click and choose "New File Connection" As you can see in the graphic below we have chosen to use an existing file and have passed in the name as well. Have a look around at the other "Usage Type" values available whilst you are here. Having set that up we can now see in the connection manager tray our file connection manager sitting alongside our OLE-DB connection we have been using for the rest of these examples. Now we can go back to the familiar General Tab to set up how the task will accept our file connection as the source. All the other properties in this task are set up exactly as we have been doing for other examples depending on the options chosen so we will not cover them again here.   We hope you will agree that the Execute SQL Task has changed considerably in this release from its DTS predecessor. It has a lot of options available but once you have configured it a few times you get to learn what needs to go where. We hope you have found this article useful.

    Read the article

  • INSERT SQL in Java

    - by Pierre
    Hello. I have a Java application and I want to use SQL database. I have a class for my connection : public class SQLConnection{ private static String url = "jdbc:postgresql://localhost:5432/table"; private static String user = "postgres"; private static String passwd = "toto"; private static Connection connect; public static Connection getInstance(){ if(connect == null){ try { connect = DriverManager.getConnection(url, user, passwd); } catch (SQLException e) { JOptionPane.showMessageDialog(null, e.getMessage(), "Connection Error", JOptionPane.ERROR_MESSAGE); } } return connect; } } And now, in another class I succeeded to print my values but when I attempt to insert a value nothing is happening ... Here's my code : try { Statement state = SQLConnection.getInstance().createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY); Statement state2 = SQLConnection.getInstance().createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_UPDATABLE); state2.executeUpdate("INSERT INTO table(field1) VALUES (\"Value\")"); // Here's my problem ResultSet res = state.executeQuery("SELECT * FROM plateau");

    Read the article

  • JAVA-SQL- Data Migration - ResultSets comparing Failing JUnit test

    - by user1865053
    I CANNOT get this JUnit Test to pass for the life of me. Can somebody point out where this has gone wrong. I am doing a data migration(MSSQL SERVER 2005), but I have the sourceDBUrl and the targetDCUrl the same URL so to narrow it down to syntax errors. So that is what I have, a syntax error. I am comparing the results of a table for the query SELECT programmeapproval, resourceapproval FROM tr_timesheet WHERE timesheetid = ? and the test always fails, but passes for other junit tests I have developed. I created 3 diffemt resultSetsEqual methods and none work. Yet, some other JUnit tests I have developed have PASSED. THE QUERY: SELECT timesheetid, programmeapproval, resourceapproval FROM tr_timesheet Returns three columns timesheetid (PK,int, not null) (populated with a range of numbers 2240 - 2282) programmeapproval (smallint,not null) (populated with the number 1 in every field) resourceapproval (smallint, not null) (populated with a number 1 in every field) When I run the query that is embedded in the code it only returns one row with the programmeapproval and resourceapproval columns and both field populated with the number 1. I have all jdbc drivers correctly installed and tested for connectivity. The JUnit Test is failing at this point according to the IDE. assertTrue(helper.resultSetsEqual2(sourceVal,targetVal)); This is the code: /*THIS IS A JUNIT CLASS****? package a7.unittests.dao; import static org.junit.Assert.assertTrue; import java.sql.Connection; import java.sql.PreparedStatement; import java.sql.ResultSet; import java.sql.Types; import org.junit.Test; import artemispm.tritonalerts.TimesheetAlert; public class UnitTestTimesheetAlert { @Test public void testQUERY_CHECKALERT() throws Exception{ UnitTestHelper helper = new UnitTestHelper(); Connection con = helper.getConnection(helper.sourceDBUrl); Connection conTarget = helper.getConnection(helper.targetDBUrl); PreparedStatement stmt = con.prepareStatement("select programmeapproval, resourceapproval from tr_timesheet where timesheetid = ?"); stmt.setInt(1, 2240); ResultSet sourceVal = stmt.executeQuery(); stmt = conTarget.prepareStatement("select programmeapproval, resourceapproval from tr_timesheet where timesheetid = ?"); stmt.setInt(1,2240); ResultSet targetVal = stmt.executeQuery(); assertTrue(helper.resultSetsEqual2(sourceVal,targetVal)); }} /*END**/ /*THIS IS A REGULAR CLASS**/ package a7.unittests.dao; import java.sql.Connection; import java.sql.DriverManager; import java.sql.ResultSet; import java.sql.ResultSetMetaData; import java.sql.SQLException; public class UnitTestHelper { static String sourceDBUrl = "jdbc:sqlserver://127.0.0.1:1433;databaseName=a7itm;user=a7user;password=a7user"; static String targetDBUrl = "jdbc:sqlserver://127.0.0.1:1433;databaseName=a7itm;user=a7user;password=a7user"; public Connection getConnection(String url)throws Exception{ return DriverManager.getConnection(url); } public boolean resultSetsEqual3 (ResultSet rs1, ResultSet rs2) throws SQLException { int col = 1; //ResultSetMetaData metadata = rs1.getMetaData(); //int count = metadata.getColumnCount(); while (rs1.next() && rs2.next()) { final Object res1 = rs1.getObject(col); final Object res2 = rs2.getObject(col); // Check values if (!res1.equals(res2)) { throw new RuntimeException(String.format("%s and %s aren't equal at common position %d", res1, res2, col)); } // rs1 and rs2 must reach last row in the same iteration if ((rs1.isLast() != rs2.isLast())) { throw new RuntimeException("The two ResultSets contains different number of columns!"); } } return true; } public boolean resultSetsEqual (ResultSet source, ResultSet target) throws SQLException{ while(source.next()) { target.next(); ResultSetMetaData metadata = source.getMetaData(); int count = metadata.getColumnCount(); for (int i =1; i<=count; i++) { if(source.getObject(i) != target.getObject(i)) { return false; } } } return true; } public boolean resultSetsEqual2 (ResultSet source, ResultSet target) throws SQLException{ while(source.next()) { target.next(); ResultSetMetaData metadata = source.getMetaData(); int count = metadata.getColumnCount(); for (int i =1; i<=count; i++) { if(source.getObject(i).equals(target.getObject(i))) { return false; } } } return true; } } /END***/ /*PASTED NEW CLASS - THIS IS A JUNIT TEST CLASS*/ package a7.unittests.dao; import static org.junit.Assert.*; import java.sql.Connection; import java.sql.DriverManager; import org.junit.Test; public class TestDatabaseConnection { @Test public void testConnection() throws Exception{ UnitTestHelper helper = new UnitTestHelper(); Connection con = helper.getConnection(helper.sourceDBUrl); Connection conTarget = helper.getConnection(helper.targetDBUrl); assertTrue(con != null && conTarget != null); } } /**END***/

    Read the article

  • Crash: iPhone Threading with Blocks

    - by jtbandes
    I have some convenience methods set up for threading with blocks (using PLBlocks). Then in the main portion of my code, I call the method -fetchArrivalsForLocationIDs:callback:errback:, which runs some web API calls in the background. Here's the problem: when I comment out the 2 NSAutoreleasePool-related lines in JTBlockThreading.m, of course I get lots of Object 0x6b31280 of class __NSArrayM autoreleased with no pool in place - just leaking errors. However, if I uncomment them, the app frequently crashes on the [pool release]; line, sometimes saying malloc: *** error for object 0x6e3ae10: pointer being freed was not allocated" *** set a breakpoint in malloc_error_break to debug. I assume I've made a horrible mistake/assumption in threading somewhere, but can anyone figure out what exactly the problem is? // JTBlockThreading.h #import <Foundation/Foundation.h> #import <PLBlocks/Block.h> #define JT_BLOCKTHREAD_BACKGROUND [self invokeBlockInBackground:^{ #define JT_BLOCKTHREAD_MAIN [self invokeBlockOnMainThread:^{ #define JT_BLOCKTHREAD_END }]; #define JT_BLOCKTHREAD_BACKGROUND_END_WAIT } waitUntilDone:YES]; @interface NSObject (JTBlockThreading) - (void)invokeBlockInBackground:(void (^)())block; - (void)invokeBlockOnMainThread:(void (^)())block; - (void)invokeBlockOnMainThread:(void (^)())block waitUntilDone:(BOOL)wait; - (void)invokeBlock:(void (^)())block; @end // JTBlockThreading.m #import "JTBlockThreading.h" @implementation NSObject (JTBlockThreading) - (void)invokeBlockInBackground:(void (^)())block { [self performSelectorInBackground:@selector(invokeBlock:) withObject:[block copy]]; } - (void)invokeBlockOnMainThread:(void (^)())block { [self invokeBlockOnMainThread:block waitUntilDone:NO]; } - (void)invokeBlockOnMainThread:(void (^)())block waitUntilDone:(BOOL)wait { [self performSelectorOnMainThread:@selector(invokeBlock:) withObject:[block copy] waitUntilDone:wait]; } - (void)invokeBlock:(void (^)())block { //NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; block(); [block release]; //[pool release]; } @end - (void)fetchArrivalsForLocationIDs:(NSString *)locIDs callback:(JTWSCallback)callback errback:(JTWSErrback)errback { JT_PUSH_NETWORK(); JT_BLOCKTHREAD_BACKGROUND NSError *error = nil; // Create API call URL NSURL *url = [NSURL URLWithString: [NSString stringWithFormat:@"%@/arrivals/appID/%@/locIDs/%@", TRIMET_BASE_URL, appID, locIDs]]; if (!url) { JT_BLOCKTHREAD_MAIN errback(@"That’s not a valid Stop ID!"); JT_POP_NETWORK(); JT_BLOCKTHREAD_END return; } // Call API NSData *data = [NSData dataWithContentsOfURL:url options:0 error:&error]; if (!data) { JT_BLOCKTHREAD_MAIN errback([NSString stringWithFormat: @"Had trouble downloading the arrival data! %@", [error localizedDescription]]); JT_POP_NETWORK(); JT_BLOCKTHREAD_END return; } CXMLDocument *doc = [[CXMLDocument alloc] initWithData:data options:0 error:&error]; if (!doc) { JT_BLOCKTHREAD_MAIN // TODO: further error description // (TouchXML doesn't provide information with the error) errback(@"Had trouble reading the arrival data!"); JT_POP_NETWORK(); JT_BLOCKTHREAD_END return; } NSArray *nodes = nil; CXMLElement *resultSet = [doc rootElement]; // Begin building the response model JTWSResponseArrivalData *response = [[[JTWSResponseArrivalData alloc] init] autorelease]; response.queryTime = [NSDate JT_dateWithTriMetWSTimestamp: [[resultSet attributeValueForName:@"queryTime"] longLongValue]]; if (!response.queryTime) { // TODO: further error check? NSLog(@"Hm, query time is nil in %s... response %@, resultSet %@", __PRETTY_FUNCTION__, response, resultSet); } nodes = [resultSet nodesForXPath:@"//arrivals:errorMessage" namespaceMappings:namespaceMappings error:&error]; if ([nodes count] > 0) { NSString *message = [[nodes objectAtIndex:0] stringValue]; response.errorMessage = message; // TODO: this probably won't be used... JT_BLOCKTHREAD_MAIN errback([NSString stringWithFormat: @"TriMet error: “%@”", message]); JT_POP_NETWORK(); JT_BLOCKTHREAD_END return; } // Build location models nodes = [resultSet nodesForXPath:@"/arrivals:location" namespaceMappings:namespaceMappings error:&error]; if ([nodes count] <= 0) { NSLog(@"Hm, no locations returned in %s... xpath error %@, response %@, resultSet %@", __PRETTY_FUNCTION__, error, response, resultSet); } NSMutableArray *locations = [NSMutableArray arrayWithCapacity:[nodes count]]; for (CXMLElement *loc in nodes) { JTWSLocation *location = [[[JTWSLocation alloc] init] autorelease]; location.desc = [loc attributeValueForName:@"desc"]; location.dir = [loc attributeValueForName:@"dir"]; location.position = [[[CLLocation alloc] initWithLatitude:[[loc attributeValueForName:@"lat"] doubleValue] longitude:[[loc attributeValueForName:@"lng"] doubleValue]] autorelease]; location.locID = [[loc attributeValueForName:@"locid"] integerValue]; } // Build arrival models nodes = [resultSet nodesForXPath:@"/arrivals:arrival" namespaceMappings:namespaceMappings error:&error]; if ([nodes count] <= 0) { NSLog(@"Hm, no arrivals returned in %s... xpath error %@, response %@, resultSet %@", __PRETTY_FUNCTION__, error, response, resultSet); } NSMutableArray *arrivals = [[NSMutableArray alloc] initWithCapacity:[nodes count]]; for (CXMLElement *arv in nodes) { JTWSArrival *arrival = [[JTWSArrival alloc] init]; arrival.block = [[arv attributeValueForName:@"block"] integerValue]; arrival.piece = [[arv attributeValueForName:@"piece"] integerValue]; arrival.locID = [[arv attributeValueForName:@"locid"] integerValue]; arrival.departed = [[arv attributeValueForName:@"departed"] boolValue]; // TODO: verify arrival.detour = [[arv attributeValueForName:@"detour"] boolValue]; // TODO: verify arrival.direction = (JTWSRouteDirection)[[arv attributeValueForName:@"dir"] integerValue]; arrival.estimated = [NSDate JT_dateWithTriMetWSTimestamp: [[arv attributeValueForName:@"estimated"] longLongValue]]; arrival.scheduled = [NSDate JT_dateWithTriMetWSTimestamp: [[arv attributeValueForName:@"scheduled"] longLongValue]]; arrival.fullSign = [arv attributeValueForName:@"fullSign"]; arrival.shortSign = [arv attributeValueForName:@"shortSign"]; NSString *status = [arv attributeValueForName:@"status"]; if ([status isEqualToString:@"estimated"]) { arrival.status = JTWSArrivalStatusEstimated; } else if ([status isEqualToString:@"scheduled"]) { arrival.status = JTWSArrivalStatusScheduled; } else if ([status isEqualToString:@"delayed"]) { arrival.status = JTWSArrivalStatusDelayed; } else if ([status isEqualToString:@"canceled"]) { arrival.status = JTWSArrivalStatusCanceled; } else { NSLog(@"Unknown arrival status %s in %@... response %@, arrival %@", status, __PRETTY_FUNCTION__, response, arv); } NSArray *blockPositions = [arv nodesForXPath:@"/arrivals:blockPosition" namespaceMappings:namespaceMappings error:&error]; if ([blockPositions count] > 1) { // The schema allows for any number of blockPosition elements, // but I'm really not sure why... NSLog(@"Hm, more than one blockPosition in %s... response %@, arrival %@", __PRETTY_FUNCTION__, response, arv); } if ([blockPositions count] > 0) { CXMLElement *bpos = [blockPositions objectAtIndex:0]; JTWSBlockPosition *blockPosition = [[JTWSBlockPosition alloc] init]; blockPosition.reported = [NSDate JT_dateWithTriMetWSTimestamp: [[bpos attributeValueForName:@"at"] longLongValue]]; blockPosition.feet = [[bpos attributeValueForName:@"feet"] integerValue]; blockPosition.position = [[[CLLocation alloc] initWithLatitude:[[bpos attributeValueForName:@"lat"] doubleValue] longitude:[[bpos attributeValueForName:@"lng"] doubleValue]] autorelease]; NSString *headingStr = [bpos attributeValueForName:@"heading"]; if (headingStr) { // Valid CLLocationDirections are > 0 CLLocationDirection heading = [headingStr integerValue]; while (heading < 0) heading += 360.0; blockPosition.heading = heading; } else { blockPosition.heading = -1; // indicates invalid heading } NSArray *tripData = [bpos nodesForXPath:@"/arrivals:trip" namespaceMappings:namespaceMappings error:&error]; NSMutableArray *trips = [[NSMutableArray alloc] initWithCapacity:[tripData count]]; for (CXMLElement *tripDatum in tripData) { JTWSTrip *trip = [[JTWSTrip alloc] init]; trip.desc = [tripDatum attributeValueForName:@"desc"]; trip.destDist = [[tripDatum attributeValueForName:@"destDist"] integerValue]; trip.direction = (JTWSRouteDirection)[[tripDatum attributeValueForName:@"dir"] integerValue]; trip.pattern = [[tripDatum attributeValueForName:@"pattern"] integerValue]; trip.progress = [[tripDatum attributeValueForName:@"progress"] integerValue]; trip.route = [[tripDatum attributeValueForName:@"route"] integerValue]; [trips addObject:trip]; [trip release]; } blockPosition.trips = trips; [trips release]; NSArray *layoverData = [bpos nodesForXPath:@"/arrivals:layover" namespaceMappings:namespaceMappings error:&error]; NSMutableArray *layovers = [[NSMutableArray alloc] initWithCapacity:[layoverData count]]; for (CXMLElement *layoverDatum in layoverData) { JTWSLayover *layover = [[JTWSLayover alloc] init]; layover.start = [NSDate JT_dateWithTriMetWSTimestamp: [[layoverDatum attributeValueForName:@"start"] longLongValue]]; layover.end = [NSDate JT_dateWithTriMetWSTimestamp: [[layoverDatum attributeValueForName:@"end"] longLongValue]]; // TODO: it seems the API can send a <location> inside a layover (undocumented)... support? [layovers addObject:layover]; [layover release]; } blockPosition.layovers = layovers; [layovers release]; arrival.blockPosition = blockPosition; [blockPosition release]; } [arrivals addObject:arrival]; [arrival release]; } // Add arrivals to corresponding locations for (JTWSLocation *loc in locations) { loc.arrivals = [arrivals selectWithBlock:^BOOL (id arv) { return loc.locID == ((JTWSArrival *)arv).locID; }]; } [arrivals release]; response.locations = locations; [locations release]; // Build route status models (used in inclement weather) nodes = [resultSet nodesForXPath:@"/arrivals:routeStatus" namespaceMappings:namespaceMappings error:&error]; NSMutableArray *routeStatuses = [NSMutableArray arrayWithCapacity:[nodes count]]; for (CXMLElement *stat in nodes) { JTWSRouteStatus *status = [[JTWSRouteStatus alloc] init]; status.route = [[stat attributeValueForName:@"route"] integerValue]; NSString *statusStr = [stat attributeValueForName:@"status"]; if ([statusStr isEqualToString:@"estimatedOnly"]) { status.status = JTWSRouteStatusTypeEstimatedOnly; } else if ([statusStr isEqualToString:@"off"]) { status.status = JTWSRouteStatusTypeOff; } else { NSLog(@"Unknown route status type %s in %@... response %@, routeStatus %@", status, __PRETTY_FUNCTION__, response, stat); } [routeStatuses addObject:status]; [status release]; } response.routeStatuses = routeStatuses; [routeStatuses release]; JT_BLOCKTHREAD_MAIN callback(response); JT_POP_NETWORK(); JT_BLOCKTHREAD_END JT_BLOCKTHREAD_END }

    Read the article

  • using JMock to write unit test for a simple spring JDBC DAO

    - by Quincy
    I'm writing an unit test for spring jdbc dao. The method to test is: public long getALong() { return simpleJdbcTemplate.queryForObject("sql query here", new RowMapper<Long>() { public Long mapRow(ResultSet resultSet, int i) throws SQLException { return resultSet.getLong("a_long"); } }); } Here is what I have in the test: public void testGetALong() throws Exception { final Long result = 1000L; context.checking(new Expectations() {{ oneOf(simpleJdbcTemplate).queryForObject("sql_query", new RowMapper<Long>() { public Long mapRow(ResultSet resultSet, int i) throws SQLException { return resultSet.getLong("a_long"); } }); will(returnValue(result)); }}); Long seq = dao.getALong(); context.assertIsSatisfied(); assertEquals(seq, result); } Naturally, the test doesn't work (otherwise, I wouldn't be asking this question here). The problem is the rowmapper in the test is different from the rowmapper in the DAO. So the expectation is not met. I tried to put with around the sql query and with(any(RowMapper.class)) for the rowmapper. It wouldn't work either, complains about "not all parameters were given explicit matchers: either all parameters must be specified by matchers or all must be specified by values, you cannot mix matchers and values"

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #048

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Order of Result Set of SELECT Statement on Clustered Indexed Table When ORDER BY is Not Used Above theory is true in most of the cases. However SQL Server does not use that logic when returning the resultset. SQL Server always returns the resultset which it can return fastest.In most of the cases the resultset which can be returned fastest is the resultset which is returned using clustered index. Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT One of the Jr. Developer asked me this question (What will be the Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT?) while I was rushing to an important meeting. I was getting late so I asked him to talk with his Application Tech Lead. When I came back from meeting both of them were looking for me. They said they are confused. I quickly wrote down following example for them. 2008 SQL SERVER – Guidelines and Coding Standards Complete List Download Coding standards and guidelines are very important for any developer on the path of a successful career. A coding standard is a set of guidelines, rules and regulations on how to write code. Coding standards should be flexible enough or should take care of the situation where they should not prevent best practices for coding. They are basically the guidelines that one should follow for better understanding. Download Guidelines and Coding Standards complete List Download Get Answer in Float When Dividing of Two Integer Many times we have requirements of some calculations amongst different fields in Tables. One of the software developers here was trying to calculate some fields having integer values and divide it which gave incorrect results in integer where accurate results including decimals was expected. Puzzle – Computed Columns Datatype Explanation SQL Server automatically does a cast to the data type having the highest precedence. So the result of INT and INT will be INT, but INT and FLOAT will be FLOAT because FLOAT has a higher precedence. If you want a different data type, you need to do an EXPLICIT cast. Renaming SP is Not Good Idea – Renaming Stored Procedure Does Not Update sys.procedures I have written many articles about renaming a tables, columns and procedures SQL SERVER – How to Rename a Column Name or Table Name, here I found something interesting about renaming the stored procedures and felt like sharing it with you all. The interesting fact is that when we rename a stored procedure using SP_Rename command, the Stored Procedure is successfully renamed. But when we try to test the procedure using sp_helptext, the procedure will be having the old name instead of new names. 2009 Insert Values of Stored Procedure in Table – Use Table Valued Function It is clear from the result set that , where I have converted stored procedure logic into the table valued function, is much better in terms of logic as it saves a large number of operations. However, this option should be used carefully. The performance of the stored procedure is “usually” better than that of functions. Interesting Observation – Index on Index View Used in Similar Query Recently, I was working on an optimization project for one of the largest organizations. While working on one of the queries, we came across a very interesting observation. We found that there was a query on the base table and when the query was run, it used the index, which did not exist in the base table. On careful examination, we found that the query was using the index that was on another view. This was very interesting as I have personally never experienced a scenario like this. In simple words, “Query on the base table can use the index created on the indexed view of the same base table.” Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries Working with SQL Server has never seemed to be monotonous – no matter how long one has worked with it. Quite often, I come across some excellent comments that I feel like acknowledging them as blog posts. Recently, I wrote an article on SQL SERVER – Execution Plan and Results of Aggregate Concatenation Queries Depend Upon Expression Location, which is well received in the community. 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 2011 Startup Parameters Easy to Configure If you are a regular reader of this blog, you must be aware that I have written about SQL Server Denali recently. Here is the quickest way to reach into the screen where we can change the startup parameters. Go to SQL Server Configuration Manager >> SQL Server Services >> Right Click on the Server >> Properties >> Startup Parameters 2012 Validating Unique Columnname Across Whole Database I sometimes come across very strange requirements and often I do not receive a proper explanation of the same. Here is the one of those examples. For example “Our business requirement is when we add new column we want it unique across current database.” Read the solution to this strange request in this blog post. Excel Losing Decimal Values When Value Pasted from SSMS ResultSet It is very common when users are coping the resultset to Excel, the floating point or decimals are missed. The solution is very much simple and it requires a small adjustment in the Excel. By default Excel is very smart and when it detects the value which is getting pasted is numeric it changes the column format to accommodate that. Basic Calculation and PEMDAS Order of Operation Read this interesting blog post for fantastic conversation about the subject. Copy Column Headers from Resultset – SQL in Sixty Seconds #027 – Video http://www.youtube.com/watch?v=x_-3tLqTRv0 Delete From Multiple Table – Update Multiple Table in Single Statement There are two questions which I get every single day multiple times. In my gmail, I have created standard canned reply for them. Let us see the questions here. I want to delete from multiple table in a single statement how will I do it? I want to update multiple table in a single statement how will I do it? Read the answer in the blog post. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How do you handle the fetchxml result data?

    - by Luke Baulch
    I have avoided working with fetchxml as I have been unsure the best way to handle the result data after calling crmService.Fetch(fetchXml). In a couple of situations, I have used an XDocument with LINQ to retrieve the data from this data structure, such as: XDocument resultset = XDocument.Parse(_service.Fetch(fetchXml)); if (resultset.Root == null || !resultset.Root.Elements("result").Any()) { return; } foreach (var displayItem in resultset.Root.Elements("result").Select(item => item.Element(displayAttributeName)).Distinct()) { if (displayItem!= null && displayItem.Value != null) { dropDownList.Items.Add(displayItem.Value); } } What is the best way to handle fetchxml result data, so that it can be easily used. Applications such as passing these records into an ASP.NET datagrid would be quite useful.

    Read the article

  • Simple select not working on JDBC MSSQL ?

    - by Xinus
    I am trying to move project which was using MySQL database to the one that uses MSSQL 2008, But the select that was working in mysql is no longer working in MSSQL PreparedStatement statement = connection .prepareStatement("select u.user_firstname,u.user_lastname from user_details u, login l where l.username=? and l.login_user = u.user_id"); statement.setString(1, userName); ResultSet resultSet = (ResultSet) statement.executeQuery(); It always gives me empty resultset even when there are values corresponding to that username, When I run query using MSSQL management studio - query works properly i.e. it gives non-zero rows, Are there any MSSQL specific change I need to do ?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >