Search Results

Search found 5491 results on 220 pages for 'sound scheme'.

Page 5/220 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• HDMI Sound Stops Working

  - by stueng

  When not used for a few hours the sound stops working on my HTPC. To get sound to work again I have to unplug the HDMI cable and plug it back in again When this sound "outage" occurs, the HDMI device dissapears from the sound config output devices I see the following in dmesg [78534.010328] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78534.010363] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78558.948403] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78558.948429] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78562.579047] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0 [78562.579078] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78562.579992] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1 [78562.580043] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78562.876030] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78563.176036] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78563.195139] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78563.195169] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78563.476030] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78635.529493] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78635.529524] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [78641.330701] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0 [78641.330733] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78641.331649] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1 [78641.331668] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78641.628050] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78641.928037] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78642.228042] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78642.528039] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1 [78642.828037] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1

  Read the article

• Unable to make sound play in headset

  - by user50849

  Top right, I click the sound icon, select sound settings, and connect my USB-headset. I can them see the headset being detected as it pops up in the menu. I click it, and expect the currently played audio to get sent to the headset instead. My problem is that it does not. The audio keeps playing through the built-in speakers. More info: The icon for my built-in card in the sound settings is a circuit with a note symbol on top. The symbol for the headset is just black background with a "No" symbol on it. Might mean it doesn't work somehow. I installed pavucontrol, and notice that no second sound card shows up in there. When connecting, the syslog says Jun 20 09:38:46 yuna kernel: [40144.553431] usb 2-1.2: new full-speed USB device number 11 using ehci_hcd Jun 20 09:38:46 yuna kernel: [40144.650609] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input20 Jun 20 09:38:46 yuna kernel: [40144.650895] generic-usb 0003:0D8C:000C.000B: input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.0-1.2/input3 Jun 20 09:38:46 yuna mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" Jun 20 09:38:46 yuna mtp-probe: bus: 2, device: 11 was not an MTP device

  Read the article

• My sound is not working, so I'm going to reinstall FYI [closed]

  - by fer

  I've had trouble getting the sound to work in Ubuntu 12.04 I'm running an Acer Aspire 5739g laptop. This is using a clean install. This wasn't a problem when ubuntu first installed. Rather, it was when I ran the updates that it stopped working. I already tried the suggestions on the ubuntu sites and other similar queries, and they haven't fixed it. Something in the updates is making my sound not work. Edit: It turns out that this might be a bug (the sound issue, first paragraph). After reinstall, it happened again (it's not caused by updates at all, or any software, because I fixed it now w/o reinstall). It seems like I replicated it as follows: I changed auto-hide in the behavior tab of Appearance settings by turning it on, and setting the sensitivity to below the recommended setting. Then instead of restarting, I just logged out and back in. The sound stopped working again. I set the behavior settings to default, restarted, and now it's back to normal. Not sure if it's due to only logging out (and not restarting) or b/c I set my sensitivity to a low setting. Not sure if this helps anyone, but thought I'd mention it.

  Read the article

• Unreal Torunament (UT99) no sound in 12.04?

  - by Talas

  I've been trying to get sound working in Unreal Torunament for a couple of days now. I'm using the native Unreal Tournament version, not wine or something like that. I have sound in all other games and media applications that I have tried. In older ubuntu versions it worked fine. I'm now using kubuntu 12.04, I have all the alsa-oss and oss-compat packages installed. I have followed most of the advice out there, and it all seems to fall on padsp and aoss. My problem, however, is that even when trying to use padsp or aoss, I can't get any sound at all. (Note UT has two output modes: ALAudio and Generic(OSS), I have tried both). Is there some configuration required to use padsp or aoss correctly? I have ran it like padsp ./ut and aoss ./ut If using the AL backend in UT I get (both aoss and padsp give this): Bound to ALAudio.so open /dev/dsp: Invalid argument Audio initialization failed. If using the OSS backend in UT I get (both aoss and padsp give this): Bound to Audio.so Failed to open audio device. Audio initialization failed. Note that so far, I have gotten absolutely no sound. Thanks for any help!

  Read the article

• Ubuntu 14.04 and Dell E6440 - sound and mouse working after suspend/resume

  - by slawek.mikula

  I've installed fresh Ubuntu 14.04 on Dell Lattitude E6440 and i've encountered two strange issues when doing full system start/restart: - mouse scroll when full restart is working very fast. One turn of the wheel cause very large change of value (window scroll, sound change etc.) But when i suspend and resume laptop it starts working correctly (one turn of the wheel and small change of value - the same as in previous versions of Ubuntu) - sound from speakers - the same issue. When full restart the sound does not come from internal laptop speakers. It works though through headphones. After suspend/resume internal speakers starts to work. What can be a cause of these issues ?

  Read the article

• No sound 12.04 (Dummy output)

  - by Edgar Adrian Alvarez

  Its been weeks with no sound. I feel like Ive tried everything but somethings just dont seem right. I am a new user and so far i love Ubuntu but this sound issue is making me unsure. Im NOT muted. Ive tried multiple jacks, front and back. in alsamixer it says choose sound card and I have only thr 'hda Intel' option. In pulseaudio I only have 'dummy output'. When I have Youtube on I can see audio being detected in pavucontrol but nothing is coming out of the speakers. Im getting desperate, some one please walk me thru this. http://www.alsa-project.org/db/?f=c7377242d96ea884edebd807f4fe71f619b8d6af What more information should i provided?

  Read the article

• how to save and load the state of a game in scheme

  - by user3667664

  I'm creating the game of chess in scheme, but do not know how to save and load game state is a part I have this code (define-struct ficha(color se-movio? tipo-ficha )) ;;tablero lista de listas de fichas (define-struct estado (tablero turno fichaSel)) (define bpawn (bitmap "b-peon.png")) (define brook (bitmap "b-torre.png")) (define bcaballo (bitmap "b-caballo.png")) (define bbish (bitmap "b-arfil.png")) (define bquee (bitmap "b-reina.png")) (define bking (bitmap "b-rey.png")) (define wpawn (bitmap "w-peon.png")) (define wrook (bitmap "w-torre.png")) (define wcaballo (bitmap "w-caballo.png")) (define wbish (bitmap "w-arfil.png")) (define wquee (bitmap "w-reina.png")) (define wking (bitmap "w-rey.png")) (define board (bitmap "board.jpg")) This is the board that is a list of lists (define tableroini (list (list torreb caballob arfilb reinab reyb arfilb caballob torreb) (list peonb peonb peonb peonb peonb peonb peonb peonb) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list peonw peonw peonw peonw peonw peonw peonw peonw) (list torrew caballow arfilw reinaw reyw arfilw caballow torrew))) I did this to save the state of the game: (define (Guardar-en-archivo archivo) (write-file (string-append Subcarpeta archivo ".txt") "game state" )) But not as you insert the game state on "game state" for me to save the game How I can do this ?

  Read the article

• No sound while playing multi-media in Ubuntu 12.04 for XPS15

  - by ved2254

  I have an XPS15 laptop, core i5, 8GB ram. Whenever I login my laptop I here the startup bongo sound. But my sound system just doesn't play anything, may it be a short audio clip or a movie. Output of lshw -c multimedia is : WARNING: you should run this program as super-user. *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:51 memory:f1c00000-f1c03fff WARNING: output may be incomplete or inaccurate, you should run this program as super-user. Headphones work just fine but there is no sound from the speakers. Is it a bug in multi-media players or ALSA?

  Read the article

• Ubuntu 12.04 LTS x86_64 sound artifacts when scrolling with firefox

  - by Nh3xus

  I've been using Ubuntu since the 10.04 LTS version and i have a sound problem that still remain in my fresh install of the 12.04 LTS AMD64 version. This install has been performed by formatting the / partition and my documents were kept safe in the separated /home partition. The problem : When i listen to a audio or video source while browsing the web with Firefox, I have some sound artifacts when i'm scrolling and stops when i'm not doing it. This happens when i'm doing X11 related actions too, such as switching between virtuals desktops. Computer configuration of my laptop : - Ubuntu 12.04 LTS AMD64 - Plantronic USB Headphones - Intel HDA Audio sound card (laptop) with SigmaTel STAC9200 chip - AlsaMixer v 1.0.25 - Nvidia GeForce 7950 GTX with Nvidia 295.40 driver Any advices are welcome here :) Note : This is my first post on AskUbuntu.

  Read the article

• sound stopped working after upgrade to 11.10 on Tuesday 20th March

  - by Hugh Barney

  My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

  Read the article

• How to play the sound of an object sliding on another object for a variable duration

  - by Antoine

  I would like to add sound effects to a basic 2D game. For example, a stone sphere is rolling on wood surface. Let's say I have a 2 second audio recording of this. How could I use the sample to add sound for an arbitrary duration ? So far I have two solutions in mind: a/ record the sound for an amount of time that is greater than the maximum expected duration, and play only a part of it; b/ extract a small portion of the sample and play it in a loop for the duration of the move; however I'm not sure if it makes sense with an audio wave.

  Read the article

• No Sound in HTML5 and Google Chrome after update to 13.10

  - by rechengehirn

  After upgrading to Ubuntu 13.10 i have no sound for HTML5 players in Google Chrome Browser. Firefox works. Flash Players are working. No sound on Youtube when using HTML5. No sound on vimeo (They have html5 player as standard). When I open the soundapplication, google doesn't show up when I try to play a html5 video. But it shows up, when playing a Flash Video. Google Chrome Version is: 24.0.1312.52 Installed an updated via ppa: deb http://dl.google.com/linux/chrome/deb/ stable main

  Read the article

• Sound card stop responding

  - by Merianos Nikos

  A few days ago I installed the latest version of Ubuntu in a computer of mine, that it has installed the "Sound Blaster Audigy 2ZS". After the installation and up to yesterday everything was excelent. Yesterday I installed the latest Ubuntu updates and today I had several issues. First the mouse was not responed as should be, but after restarted my computer everything was fine with mouse. Next was my sound card. For now I do not have sound at all :( I don't really know what's wrong. Does anybody has any idea on how to solve that issue, or from where to start, to find a solution ? If there is no any available solution for that issue, can I remove the latest updates that installed yesterday ? Kind regards Merianos Nikos

  Read the article

• No sound on fresh install of 13.10

  - by Totalnon

  I installed a new copy of 13.10 today and cannot get my audio to work. Speakers test good on other devices, enabled in the BIOS, worked this morning in a Windows environment. I ran all of the available updates through apt-get. aplay -l lists my card (which tells me Ubuntu recognizes the hardware, I have been looking around the web and trying various things to no avail. Pulse folder permissions seem fine, I've reinstalled ALSA, and the card shows both digital and analog in the system settings sound section. I have tried this guide: Sound Troubleshooting Guide As well as looked through these forums under the tags sound and 13.10 Anyone have any ideas that may help me?

  Read the article

• Difference between Sound and Music

  - by Southpaw Hare

  What are the key differences between the Sound and Music classes in Pygame? What are the limitations of each? In what situation would one use one or the other? Is there a benefit to using them in an unintuitive way such as using Sound objects to play music files or visa-versa? Are there specifically issues with channel limitations, and do one or both have the potential to be dropped from their channel unreliably? What are the risks of playing music as a Sound?

  Read the article

• No Sound from Shared Media

  - by Travis

  I have a shared media folder that I have all of my mp3's in. When I try to play them using Ubuntu, I get no sound, but the media player (Rhythmbox, Exaile, etc) display that they are playing the file, it looks like everything is playing but no sound. I have checked and rechecked the volume levels of the system and each application and I see no issues. If I move a file to the local drive, it plays just fine. I do sound checks while the file is playing and I get audio (front left, front right) from the test but not from the media file that I am playing. Any help would be greatly appreciated.

  Read the article

• No sound, even though devices appear OK

  - by Felix

  I have a weird problem. Sound used to work until a couple of days ago, but now the builtin speakers in my ThinkPad W520 have stopped working. This happened after either: An update Using the headphone jack in my laptop dock (I had used the jack in the actual laptop before without issues) As I was saying, the speakers do not work at all. Sometimes I get a clicking sound from the laptop, which I assume is the system beep. This does not happen consistently. If I plug headphones in the laptop, I do get sound in them. I have tried playing with all the possible settings both in gnome and using alsamixer. Some screens: What could I try next?

  Read the article

• No sound in 12.04 on VirtualBox

  - by john crisp

  No sound when installed in VirtualBox. When I boot from the live CD in Windows, sound works fine on my speakers. When in boot the live CD in VirtualBox it does not see my speakers. In sound properties only digital output built in S/PDIF and headphones! I've done the pavcontrol - alsamixer - all settings are OK. I've tried both 32/64 versions of Ubuntu. Running current version VirtualBox. System: Windows 7 64 - i5. What am I overlooking?

  Read the article

• No sound in any web browser(s)

  - by shaneo

  Hello I recently tried to compile and update alsa from source via this guide http://www.stchman.com/alsa_update.html. Afterwards the sound in any web browser I open Firefox, Opera, Chrome, Chromium, Iron there is no sound on any pages. I went back through the script listed on the site and found where it had installed the drivers and deleted it and than re-installed alsa via synaptic. Though I still have no sound in my browser(s). All system sounds work as they are supposed to only web sounds don't work. Here is my alsabase.conf http://paste.ubuntu.com/1073135/ also a snapshot of alsamixer Any assistance would be greatly appreciated. Thank You and let me know if any more information is required.

  Read the article

• Sound no longer changes when I plug in headphones in Ubuntu 12.04

  - by Victor9098

  In ubuntu 11.10 (I am not 100% about 11.04) when I plugged in my headphones the sound settings would automatically set themselves to my preferred setting (on 100% and then use the dial on the headphones to control). Then when I unplugged them the sound would go back to whatever I had been using previously. Since upgrading to 12.04 this has stopped working. Instead I have to adjust my sound settings after I plug in headphones and remember to turn down before unplugging. Does anybody know how to get this working again or has the feature been removed in 12.04?

  Read the article

• Strange sound distortion using headphones

  - by Luca

  When I use headphones, the sound comes out distorted. Voices sound as if they were far away, while instruments that should be in the background sound enhanced. When I play songs with the laptop's integrated speakers everything is alright, and the headphones work normally when plugged into another computer. I tried reloading ALSA and reinstalling some of the related packages, but nothing worked. I'm using Xubuntu 12.04 32-bit. Thanks to anyone who will suggest me how to solve this problem.

  Read the article

• Acer sound card

  - by Rob Brugh

  Hi I have an acer aspire on a recent upgrade somehow it loaded dummy output into upper memory so every time I boot up I have to manually load my sound card. using sudo /sbin/alsa reload then alsamixer and f6 to change to my proper sound card. How do I go about making that my default sound card loading on boot every time. sometimes the message comes up cannot find alsamixer, if that happens I have to run the following command sudo /sbin/alsa force-reload and then alsamixer. That works only on current session I would like to get that so it boots without coming up with dummy output. anyone out there know what the command is to make that load to boot section?

  Read the article

• No sound coming from HDMI

  - by cypwrx

  (Ubuntu 12.04 x64) After looking at other questions (here and other sites) and trying their respective answers, I am still unable to get the hdmi audio out working. I have downloaded the recommended hardware drivers for my card (radeon hd 4350), made sure that the card is not muted in alsamixer, and set it as the correct output device in sound settings. I have also disabled the onboard sound devices in the bios menu. In aplay -l, it shows my hdmi card as hw:0,3 Even after doing sound tests I still cannot hear anything. Any suggestions? Not sure where to go from here, I am fairly new to linux.

  Read the article

• No sound with a Creative Labs Soundblaster live EMU10K1X

  - by Geo

  I just installed ubuntu. things seems great but I have no sound. When I go to the settings menu I chose from various setup. I found one that work which had 4 speakers a subwofer and a front speaker. When I test it the sound works fine. However, when I try playing an *.mp3 file or try to watch a video on you tube I get no sound at all. I have a dual boot with windows XP and there is no problem in windows at all. Below is my setup. OS: ubuntu 11.10 machine: dell dimension 8300 speakers: dell creative lab sounblaster live EMU10K1X video: ATI RADEON R350 [Radeon 9800 Pro] secondary Following https://wiki.ubuntu.com/DebuggingSoundProblems did not help.

  Read the article

• ubuntu 12.04 sound not working in applications

  - by user109887

  I run Ubuntu on a DELL Vostro 3500 laptop. Everything was working perfectly since this morning, after an update... I can't play any multimedia sound anymore, that includes youtube and others, mp3 in Rythmbox, sound of video in VLC. I can see my device in the setting window and I can play tests sound, but nothing else. Any idea? EDIT: I'm switching very often from to HDMI output, which is deconnected right now. I've tried running VLC, and in the audio menu, you can choose the output so now I can listen to music via VLC but not with other programs. Looks like ubuntu is not totally switching the audio device after unplugging the HDMI cable. Is there any command line which can do so?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >